Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-11

Re-evaluating Confidence Remasking in Masked Diffusion Language Models

arXiv:2606.12232v1 Announce Type: new Abstract: Masked diffusion language models (dLLMs) have recently emerged as a competitive alternative to autoregressive language models, with the promise of faster inference via parallel token generation. A notable limitation of the masked formulation, however, is that once a token has been unmasked it can no longer be revised, leaving dLLMs vulnerable to early sampling mistakes. To address this, a growing body of work has sought to extend masked dLLMs with self-correcting (remasking) capabilities. One appealing subset of these methods does so in a training-free, post-hoc manner based on token confidences, with encouraging early reported results. In this work, we revisit the empirical evaluation of a representative post-hoc remasking method, WINO [Hong et al., 2026], and find that under standard decoding settings (shorter block lengths) it brings little-to-no benefit over confidence-based unmasking alone [Wu et al., 2025]. Extending the evaluation to non-greedy decoding, we find that while confidence-based remasking can mitigate errors introduced by increased stochasticity to some extent, it also exacerbates the diversity collapse previously reported for confidence-based unmasking. Overall, our results show that the benefits of post-hoc confidence-based remasking are highly setting-dependent, underscoring the need for a more comprehensive evaluation framework.

02.
medRxiv (Medicine) 2026-06-15

Investigation of Intra-Fraction Stability and Inter-Fraction Reproducibility of Deep Inspiration Breath-Hold Across Two Hypofractionated Radiotherapy Regimens in the HYPORT Adjuvant Study.

Background: Deep Inspiration Breath Hold (DIBH) is a widely used respiratory motion management technique for minimizing cardiac dose in left-sided breast radiotherapy. In the Breast HYPORT Adjuvant study, DIBH was employed for cardiac sparing in patients without nodal irradiation using a standardized institutional protocol with the Varian Real-time Position Management (RPM) system. Both moderate-hypofractionation (control arm - 40Gy in 15 fractions) and one-week hypofractionation (experimental arm - 26 Gy in 5 fractions) regimens were delivered using this protocol. This study aimed to evaluate the robustness of DIBH by analyzing intra-fraction stability and inter-fraction reproducibility of breath-hold amplitude across the two treatment regimens. Methods: Respiratory waveforms acquired during each treatment session were analyzed to determine the median breath-hold amplitude and its standard deviation during beam delivery. Intra-fraction stability was assessed from vari- ations within individual treatment sessions, while inter-fraction reproducibility was evaluated relative to the simula- tion waveform amplitude across all treatment sessions. These parameters were compared between the two HYPORT regimens to examine breath-hold consistency during treatment delivery. Moreover, an additional comparison was made between the one-week hypofractionation regimen and the first five fractions of the moderate-hypofractionation regimen to evaluate the effect of treatment duration . Lung volumes from free-breathing and DIBH CT scans were analyzed to assess the effectiveness of patient breath-hold training. Results: Both arms demonstrated an average 1.7-fold increase of air volume in lung during the breath-hold position, confirming the effective implementation of DIBH during treatment planning and delivery. Structured training resulted in increased breath-hold amplitudes, with gains of 22.87% and 24.16% with respect to the first trial session in the experimental and control arms, respectively. Both regimens receive equivalent doses for approximately the same air volume in lung . Despite the different prescription doses in the two arms (26 Gy vs. 40 Gy), the experimental arm achieved an equivalent mean heart dose of 2.91% (75.6 cGy) compared with 2.95% (118.51 cGy) in the control arm, suggesting a similar cardiac preservation protocol adopted during treatment planning. Intra-fraction stability was similar between the control arm and the experimental arm, with median amplitude variations of 1.006 mm (95% CI: [0.998-1.015]) and 1.079 mm (95% CI: [1.067-1.097]), respectively. In contrast, inter-fraction reproducibility improved in the experimental arm, with lower deviation from simulation amplitude (0.44 {+/-} 0.24 mm vs. 0.66 {+/-} 0.25 mm) for the entire treatment schedule. The stability and reproducibility of experimental arm were further compared with the first five fractions of the control arm. The results were similar to those of the experimental arm. Conclusion: In this study, we compared two treatment regimens in terms of intra-fraction stability and inter-fraction reproducibility during DIBH radiotherapy. Both regimens demonstrated comparable intra-fraction stability, indicating effective motion management irrespective of treatment duration. However, the experimental arm showed better inter- fraction reproducibility, suggesting more consistent breath-hold performance throughout the treatment course. Based on stability and reproducibility, a reasonable narrowing of the DIBH gating window may be implemented with minor changes to the institutional protocol. The observed trend highlights the potential for improved consistency with the experimental approach and supports further investigation to better understand the underlying factors and strengthen these findings in future studies.

03.
arXiv (CS.CV) 2026-06-16

Track2View: 4D-Consistent Camera-Controlled Video Generation via Paired 3D Point Tracks

Re-rendering an existing video from a novel camera viewpoint requires the output to follow the prescribed camera trajectory while preserving the appearance and dynamics of the original scene across every frame. Existing methods rely on per-frame pose embeddings, noisy point-cloud renderings, or implicit learned correspondences, none of which provides an explicit, temporally continuous link between source and target pixels. We propose Track2View, which conditions a video diffusion transformer on paired 3D point tracks: sparse trajectories of scene points projected into both the source and target camera views. These tracks provide explicit spatiotemporal correspondences that are temporally continuous by construction, encoding what content should appear where and when. At the core of Track2View is a dual-view track conditioner that transfers visual context from source to target view through parameter-free geometric operations and learned temporal aggregation, ensuring generalization to arbitrary camera trajectories without memorizing specific motions. We further introduce a data curation pipeline that extracts one-to-one track correspondences by running a 3D point tracker on temporally concatenated multi-camera view pairs. On a 400-video benchmark spanning static and dynamic scenes, Track2View achieves state-of-the-art results across visual quality, view synchronization, and camera accuracy, reducing rotation error by 30-65% and translation error by 61-72% relative to leading baselines. Project page is available at this https URL: https://qjizhi.github.io/track2view

04.
medRxiv (Medicine) 2026-06-15

Comparative Analysis of Machine Learning Models vs. Traditional Clinical Calculators for Cardiovascular Risk Prediction

Background: Cardiovascular diseases (CVD) remain the leading global cause of mortality, responsible for approximately 31% of all deaths worldwide in 2021. Traditional risk calculators, including Framingham, ASCVD, SCORE, and SCORE2, have long constituted the cornerstone of primary prevention strategies; however, they were derived predominantly from high-income European and North American populations, thereby limiting their predictive accuracy in diverse epidemiological contexts, particularly among Hispanic/Latino communities. Machine learning (ML) offers an alternative to capture the non-linear interactions inherent in biomedical data. Objective: The present study develops and validates ML-based models for cardiovascular mortality prediction using the National Health and Nutrition Examination Survey (NHANES) 1999-2018 dataset, and systematically compares their discriminative performance against eleven conventional clinical CVD risk calculators. Materials and Methods: A dedicated software platform, "CardioPrediQ," was designed to integrate multiple CVD calculators with ML-based risk assessment. A cohort of 12,847 participants with 16 predictor variables was derived from NHANES. Six algorithms (Logistic Regression, Cox Proportional Hazards, Gradient Boosting, AdaBoost, Random Forest, and Extra Trees) were trained in combination with six class-balancing strategies, yielding 36 model configurations. All models were trained on a stratified 70/30 split and calibrated using the Saerens prior probability adjustment method. Performance was evaluated using AUC-ROC, sensitivity, specificity, F1-score, and a weighted composite score. DeLong's test was employed to assess the statistical significance of AUC differences between the best-performing ML model and each conventional calculator. Results: Gradient Boosting with 2:1 oversampling and Saerens calibration achieved the best overall performance (AUC = 0.8934; composite score = 0.7904), outperforming all traditional calculators in composite ranking. The top six positions were occupied exclusively by ML and statistical models. The mean age of cardiovascular decedents was 67.43 years compared with 47.74 years among survivors. DeLong's test confirmed statistical superiority over six traditional CVD calculators (p < 0.05), whereas the difference against the top-performing calculators (ASCVD, HEARTS Caribbean, ASCVD Colombia, SCORE2, HEARTS North America) did not reach statistical significance. Age dominated feature importance at 41.2% relative weight, followed by systolic blood pressure (18.7%). Saerens calibration reduced the Brier score from 0.1286 to 0.1158, substantially improving probability calibration. Conclusions: ML models demonstrated superior composite performance over traditional calculators. The statistical equivalence with the highest-performing conventional calculators in the NHANES cohort is context-dependent and validates the methodological pipeline. The CardioPrediQ platform addresses the critical need for integrated, scalable CVD risk assessment tools, which is particularly relevant for Latin American populations where calculator validation remains limited. These findings support the integration of calibrated ML-based risk prediction into clinical practice while underscoring the importance of probability calibration for informed clinical decision-making.

05.
arXiv (CS.AI) 2026-06-19

Bistable by Construction: Wall-Clock-Calibrated State Monitors Have No Moment-Detection Regime at Agent Cadence

arXiv:2606.19386v1 Announce Type: cross Abstract: Runtime monitors for autonomous agents commonly threshold an accumulated internal state - a behavioural baseline, a drift statistic, or, in our prior work, a modelled affective state. We previously reported a State Saturation Trap: threshold-on-state triggers over a continuous affect engine become near-constant alarms on SWE-bench debugging agents (Modgil 2026). A post-release audit found the engine received dt=0 between actions, so its exponential decay never operated: the published trap is a pure-accumulator result. We correct the record (erratum, v2) and treat the flaw as an experiment. The key variable it exposes is whether a monitor's dynamics are calibrated in sample time (per observation, as in CUSUM) or wall-clock time (half-lives in seconds, as in affect models and EMA baselines). On fixed-rate streams these coincide; on agent streams, where inter-action time varies by orders of magnitude, they do not. A pre-registered sweep over uniform intervals (dt in {0..600}s) on 20 trajectories shows the wall-clock level trigger has two regimes: at dt=60s silent. Every critical dt lies in (1,30]s. Real agent runs measure latency at median 1.53s (p90 2.33s); real coding cadence sits inside the trap regime, vindicating the empirical finding under a corrected mechanism. The structure is a property of the calibration class, not the engine: a minimal wall-clock accumulator over the raw error stream reproduces the same cliff, while a sample-time CUSUM over the identical stream is exactly dt-invariant (20/20). A rising-edge trigger with hysteresis fires 0-3 times per trajectory in every condition. We conclude that wall-clock-calibrated leaky-integrator monitors admit no regime in which they act as moment detectors on agent streams; transition detection escapes the trap at every cadence, but does not recover human intervention timing.

06.
arXiv (CS.LG) 2026-06-16

deFOREST: Fusing Optical and Radar satellite data for Enhanced Sensing of Tree-loss

arXiv:2510.14092v2 Announce Type: replace-cross Abstract: In this paper we develop a deforestation detection pipeline that incorporates optical and Synthetic Aperture Radar (SAR) data. A crucial component of the pipeline is the construction of anomaly maps of the optical data, which is done using the residual space of a discrete Karhunen-Lo\'{e}ve (KL) expansion. Anomalies are quantified using a concentration bound on the distribution of the residual components for the nominal state of the forest. This bound does not require prior knowledge on the distribution of the data. This is in contrast to statistical parametric methods that assume knowledge of the data distribution, an impractical assumption that is especially infeasible for high dimensional data such as ours. Once the optical anomaly maps are computed they are combined with SAR data, and the state of the forest is classified by using a Hidden Markov Model (HMM). We test our approach with Sentinel-1 (SAR) and Sentinel-2 (Optical) data on a $92\,km \times 92\,km$ region in the Amazon forest. The results show that both the hybrid optical-radar and optical only methods achieve high accuracy that is superior to the recent state-of-the-art hybrid method. Moreover, the hybrid method is significantly more robust in the case of sparse optical data that are common in highly cloudy regions.

07.
arXiv (CS.LG) 2026-06-19

Optimal Ansatz-free Hamiltonian Learning In Situ

arXiv:2606.19486v1 Announce Type: cross Abstract: Characterizing the features of a Hamiltonian that governs a quantum system serves as a fundamental subroutine of quantum device calibration, signal sensing, and error correction. Recent works proposed protocols have achieved the optimal Heisenberg-limited scaling learning ansatz-free Hamiltonians from their real-time evolutions without fully specifying interaction structures. However, these protocols rely on both deep circuits with interleaving probes and control, and extremely short time resolution, making them difficult to implement on near- and intermediate-term in situ quantum experiments. In this work, we propose a computationally efficient, control-free, and ancilla-free algorithm that uses only Pauli product state preparation and measurement, and learns an ansatz-free Hamiltonian $H$ with $||H||\leq\Lambda$ in total evolution time of $\Theta(\frac{\Lambda}{\epsilon^2}\log(\frac{\Lambda}{\epsilon}))$. The evolution time cost of our algorithm is optimal for any control-free protocols as we further prove a lower bound of $\Omega(\frac{\Lambda}{\epsilon^2}\log(\frac{\Lambda}{\epsilon}))$. Technically, our method introduces a randomized-sampling framework that combines band-limited kernel-based time sampling with a displacement sieve for Hamiltonian structure learning. The characteristic probe time resolution depends only on $\Lambda$ instead of $\varepsilon$, which makes our protocol especially appealing in the high-precision regime for sensing and calibration applications. We also show that the algorithm maintains the same asymptotic total evolution time in the presence of state-preparation-and-measurement (SPAM) noise when the Hamiltonian is local after calibration. Our results demonstrate the fundamental cost of experimentally friendly Hamiltonian learning and provide a practical route to rigorous in situ characterization of near-term quantum platforms.

08.
Nature (Science) 2026-06-17

Optical fibre gripper for high-performance 3D micromanipulation

作者:

Optical tweezers offer precise, non-contact control, but operate in a limited force regime and impose strict requirements on the characteristics of the targets as well as the environmental conditions1–4. Millimetre-scale mechanical tweezers can offer higher gripping force but are not suitable for precise manipulations5–11. Integrating microgrippers directly at the optical fibres provides a new approach for precise micromanipulation. However, existing fibre-integrated tweezers still face challenges in achieving high-performance manipulation of micro-objects (for example, single cells) within narrow spaces, mainly due to simplified architectures, constrained designs and millimetre-scale footprints12–14. Here we report a three-dimensional (3D) optical fibre gripper (OFG), which is fabricated by two-step, two-photon polymerization. The OFG consists of rigid photoresist microclaws and soft thermoresponsive hydrogel muscle doped with silver nanoparticles, and its size is only 38 × 38 × 61 μm3. The OFG exhibits a force-to-mass ratio of about 340 μN mg−1, outperforming previously reported fibre-integrated tweezers by one to two orders of magnitude. The OFG can manipulate opaque particles, irregular micromechanical components and diverse single-cell types. We further demonstrated its potential in 3D microassembly of complex microdevices (bearings, shafts and gearboxes) and biomimetic sampling in the narrow environment (&lt;300 μm). These results position the OFG as a compact fibre-tip manipulator for 3D micromanipulation, offering reversible and tunable gripping in an intermediate force regime between optical field trapping and millimetre-scale mechanical tweezers. A miniature three-dimensional optical fibre gripper enables powerful, precise micromanipulation of particles and single cells in confined spaces, bridging the gap between optical and mechanical tweezers.

09.
arXiv (CS.AI) 2026-06-16

S-SPPO: Semantic-Calibrated Self-Play Preference Optimization

arXiv:2606.01561v2 Announce Type: replace Abstract: Aligning Large Language Models (LLMs) with human preferences is often formulated via Direct Preference Optimization (DPO). However, the standard Bradley-Terry instantiation of DPO is limited in modeling common departures from transitivity in human preferences. To address this, recent work has introduced Self-Play Preference Optimization (SPPO), which iteratively refines the policy by training on self-generated win-lose pairs. Our investigation, however, reveals a critical instability in SPPO: the optimization is prone to policy degeneration when the preference oracle assigns overly confident wins to semantically indistinguishable responses. To mitigate this, we propose S-SPPO, a dual-space semantic calibration framework comprising: i) Supervision Calibration via semantic gating, which anneals win rate targets toward the maximum-entropy baseline as semantic overlap increases; and ii) Representation Calibration via latent repulsion to enforce geometric diversity to prevent manifold collapse and maintain latent diversity between chosen and rejected samples. Theoretically, we show that the calibration preserves the constant-sum game structure, facilitating convergence to a Nash Equilibrium. Empirically, S-SPPO avoids the performance degradation seen in prior methods, achieving 52.19% win rate and 47.46% length-controlled win rate on AlpacaEval 2.0 with Llama-3-8B, without using additional human-annotated preferences during training. The code will be available at https://github.com/xiwenc1/s-sppo.

10.
arXiv (CS.AI) 2026-06-12

Structured Testbench Generation for LLM-Driven HDL Design and Verification-Oriented Data Curation

arXiv:2606.12983v1 Announce Type: new Abstract: Automated testbench generation has become a critical bottleneck in large language model (LLM)-driven Register Transfer Level (RTL) workflows, where large numbers of candidate designs must be verified rapidly and reliably. Existing prompt-based approaches treat testbench generation as unconstrained code synthesis, yielding stochastic outputs with high token cost, low reproducibility, and insufficient coverage. To address this gap, we present STG, a Structured Testbench Generation framework that exploits the inherent structure of hardware designs to generate deterministic testbenches. As a direct verification tool, STG runs 720x faster than an iterative LLM-based testbench generation flow and higher rate of successful compilation, achieves higher coverage, and reduces false-pass verdicts on incorrect DUTs. STG also helps identify errors in RTL generation benchmarks by exposing faulty benchmark testbenches. As a data curation engine, it is 11x faster than LLM-based filtering on a single CPU core with 127x less energy, and the resulting distilled models provide state-of-the-art performance in our multi-benchmark evaluation. As a test-time scaling oracle, it reduces node count by 14-47\%. Our models are available at https://huggingface.co/collections/AS-SiliconMind/siliconmind-v12.

11.
arXiv (CS.CV) 2026-06-17

AnnotateAnything: Automatic Annotation of 3D Assets for Robot Manipulation

Simulation enables scalable robot data collection, but raw 3D assets provide only geometry, lacking the semantic, interactive, and physical knowledge needed to specify where and how robots should act. In this work, we present AnnotateAnything, a general automatic annotation framework that converts passive 3D assets into manipulation-ready assets with structured, diverse, and executable manipulation labels. AnnotateAnything is built around two complementary pipelines. First, a unified visual-language annotation pipeline using vision-language reasoning to infer object semantics, interaction constraints, and 3D-grounded cues, providing human-prior guidance for identifying meaningful interaction regions. Second, a fully automatic and massively parallel physics annotation pipeline grounds these priors in each asset's geometry and physical constraints through candidate generation, geometry optimization and trajectory generation. This pipeline produces diverse and executable action annotations, including grasp poses, dexterous contacts, articulation waypoints, insertion directions, hanging affordances, and navigation targets. Using the generated annotations, we further build an asynchronous parallel simulation data-collection system across diverse objects, tasks, and robot embodiments. Experiments demonstrate that AnnotateAnything achieves superior annotation efficiency, data-collection efficiency, and task success rates over existing annotation and data-generation pipelines, while also supporting downstream tasks such as affordance detection, robotic VQA, and visual instruction finetuning. We provide project materials on the project page and plan to release the full code, annotations, and benchmark to facilitate future research. Videos, code, demo assets, and annotations are provided in supplementary materials Project page: https://tourmaline-caramel-169490.netlify.app.

12.
arXiv (CS.CV) 2026-06-11

PIGEON: VLM-Driven Object Navigation via Points of Interest Selection

Object navigation in unseen indoor environments requires agents to perform semantic search under partial observability. Vision-language models (VLMs) provide strong semantic-spatial priors for this task, but how to interface them with robot navigation remains challenging: dense VLM inference is expensive, while abstracting environments into symbolic memories often separates high-level reasoning from the raw visual evidence that supports it. We propose we propose PIGEON (Point of Interest Guided Exploration for Object Navigation), a VLM-driven framework that formulates object navigation as raw-observation-grounded sparse decision problem. PIGEON introduces Points of Interest (PoIs) as sparse visual decision units that couple geometrically executable waypoints with raw egocentric observations. Rather than using VLMs as dense controllers or restricting them to frontier ranking, PIGEON enables VLMs to select among task-critical PoIs, including exploration frontiers, suspected target objects, traversable stairs, and floor-level summaries, while low-level planners execute continuous motion between them. This PoI interface further makes high-level navigation decisions verifiable, allowing us to develop an RLVR pipeline that improves local VLMs without manual Chain-of-Thought annotations. Extensive experiments on Habitat ObjectNav benchmarks show that PIGEON achieves state-of-the-art zero-shot performance, scales consistently with foundation model capacity, and transfers to Active Embodied Question Answering with only prompt modifications. Real-world deployments on physical robots further demonstrate its robustness and efficiency.

13.
arXiv (CS.LG) 2026-06-18

Task-Restricted Symmetries in Recurrent Weight Space

arXiv:2606.18457v1 Announce Type: new Abstract: Recurrent networks can contain substantial functional redundancy in weight space: changing a recurrent matrix may leave the input-output rollout nearly unchanged on a task distribution, while similar-scale changes can destroy the same behavior. We study this redundancy in one-layer tanh RNNs using ordered real Schur coordinates. The Schur form separates spectral blocks from directed nonnormal couplings, giving a diagnostic basis for structured ablations that keep the input and readout maps fixed. In a fixed-length copy task, selected nonnormal Schur couplings can be removed with little loss in some trained solutions, whereas other couplings are necessary for accurate autonomous replay. Across flip-flop, sine generation, and context-dependent integration, the loss-preserving ablation profile varies across tasks and trained solutions. These results identify candidate approximate functional invariances, not universal symmetries of recurrent weight space. Schur-coordinate ablations provide a practical diagnostic for which structured perturbations preserve a trained recurrent solution and which ones disrupt its computation.

14.
arXiv (math.PR) 2026-06-11

The $K$-th nearest neighbor random walk on a Poisson point process gets trapped

arXiv:2606.11271v1 Announce Type: new Abstract: The $K$-th nearest neighbor random walk $(X_n)_{n \geq 0}$ on a homogeneous Poisson point process $\chi$ on $\R^d$ ($d\geq 1$), starts at the origin and at each step picks its next Poisson point among its closest neighbors according to i.i.d. labels having the same distribution as $K$. Our main result (Theorem 1) states that the number of Poisson points visited by $(X_n)_{n \geq 0}$ admits an exponential decay whenever the random variable $K$ has a bounded support (BS). In particular, the $K$-th nearest neighbor random walk visits finitely many Poisson points if and only if $K$ satisfies Assumption (BS). To prove it, we introduce the key notion of pioneer point which allows us to deal with the region of $\R^d$ already explored by $(X_n)_{n \geq 0}$. Still under Assumption (BS), we also prove an exponential decay for the Euclidean length of the trajectory performed by $(X_n)_{n \geq 0}$ (Theorem 2). Finally, and quite surprisingly, we exhibit an example of label distribution with bounded support for which the $K$-th nearest neighbor random walk discovers new Poisson points after a number of steps whose tail distribution is at least polynomial (Theorem 3).

15.
arXiv (CS.CL) 2026-06-16

Beyond English: Uncovering the Multilingual Gap in Vision-Language-Action Models

Vision-Language-Action models have recently demonstrated promising capabilities in learning generalist robot policies from large-scale multimodal data. However, most existing VLA systems are trained and evaluated primarily with English instructions, leaving their ability to understand and execute instructions in other languages largely unexplored. While the underlying large language models often possess multilingual capabilities, it remains unclear whether these multilingual capabilities transfer to VLAs during training. In this work, we present the first systematic study of multilingual instruction following in VLA models. We first construct multilingual instructions by extending existing benchmarks with translations of their instructions. Using these instructions, we evaluate several representative VLA models across a range of tasks in simulation settings. Our experiments reveal a significant multilingual gap: models trained primarily on English instructions exhibit substantial performance degradation when evaluated on other languages, even when the underlying language backbone is multilingual. We provide several findings and analyses to understand the multilingual gap. Cross-lingual transfer behavior analysis shows that performance drops correlate with both instruction understanding and action execution. Representation analyses suggest that multilingual instruction-caused representation shifts may contribute to the multilingual gap. Motivated by these findings, we further explore strategies to improve multilingual performance in VLAs. We propose a simple yet effective multilingual fine-tuning approach, Multilingual Principal Component Alignment, which leverages Principal Component Analysis to get the principal component subspace and align projected multilingual representations, effectively reducing the multilingual performance gap.

17.
arXiv (CS.AI) 2026-06-12

Select and Improve: Understanding the Mechanics of Post-Training for Reasoning

arXiv:2606.13125v1 Announce Type: cross Abstract: Reinforcement learning has rapidly emerged as a key component in the training of reasoning and coding models, yet it remains poorly understood from a mechanistic perspective. We study how and through what underlying processes capabilities are acquired or enhanced via reinforcement learning post-training. Our analysis, based on controlled math reasoning experiments with Qwen-2.5-1.5B, reveals two core mechanisms: strategy selection and strategy improvement. Our results highlight the role of SFT data and reinforcement learning data in activating these mechanisms, in particular showing how supervising the model on diverse reasoning strategies can enable strategy selection and how increasing difficulty in reinforcement learning data can enable strategy improvement. Taken together, our results provide mechanistic insight into RL training and suggest practical interventions to continue scaling reasoning capabilities.

18.
arXiv (CS.CL) 2026-06-18

DSB: Dynamic Sliding Block Scheduling for Diffusion LLMs

Diffusion large language models (dLLMs) have emerged as a promising alternative for text generation, distinguished by their native support for parallel decoding. In practice, block inference is crucial for avoiding order misalignment in global bidirectional decoding and improving output quality. However, the widely-used fixed, predefined block (naive) schedule is agnostic to semantic difficulty, making it a suboptimal strategy for both quality and efficiency: it can force premature commitments to uncertain positions while delaying easy positions near block boundaries. In this work, we analyze the limitations of naive block scheduling and disclose the importance of dynamically adapting the schedule to semantic difficulty for reliable and efficient inference. Motivated by this, we propose Dynamic Sliding Block (DSB), a training-free block scheduling method that uses a sliding block with a dynamic size to overcome the rigidity of the naive block. To further improve efficiency, we introduce DSB Cache, a training-free KV-cache mechanism tailored to DSB. Extensive experiments across multiple models and benchmarks demonstrate that DSB, together with DSB Cache, consistently improves both generation quality and inference efficiency for dLLMs. Code is released at https://github.com/lizhuo-luo/DSB.

19.
arXiv (CS.CV) 2026-06-11

Understanding Cross-Sensor Feature Variations for Generalizable 3D Perception

Radar-camera BEV perception often suffers from degraded performance when evaluated across datasets, as changes in driving scenes, sensor configurations, and environmental conditions can alter both the input observations and the internal fused representations. This work studies this issue from the perspective of source-domain variation modeling, aiming to improve the robustness of BEV-based 3D detectors without relying on target-domain samples. We introduce a framework that characterizes visual scene variations in the frequency domain and uses them to synthesize diverse source-domain views. By comparing the resulting fused BEV representations, the framework further captures how image-level variations influence multi-modal BEV features. These variation patterns are then used to regularize the detector, encouraging the learned fusion space to remain stable under latent scene changes. The proposed method is applied only during training and leaves the inference pipeline unchanged. Experiments on cross-dataset radar-camera 3D detection between View-of-Delft and TJ4DRadSet demonstrate consistent improvements over multiple BEV fusion backbones, and the gains remain effective when a small amount of target-domain data is available.

20.
arXiv (math.PR) 2026-06-16

Probabilities

arXiv:2601.18853v4 Announce Type: replace-cross Abstract: Probabilities is the English translation of the book Probabilités Tome 1 and Tome 2. The mathematic content is authored by Prof. Jean-Yves Ouvrard. The English version has been done by his eldest son Dr. Xavier Ouvrard. This probability theory book covers not only an introduction to this field, but also advanced concepts based on measure theory. The first part introduces the fundamentals of probability theory across 7 chapters, targeting bachelor level, including event algebras, random variables, independence, conditional probabilities, moments of discrete and continuous random variables, generating functions, and limit theorems. The second part contains 10 chapters and corresponds to master level. Following a brief introduction to measure theory, this part develops more advanced topics: probability measures and their complements, distributions and moments of random variables, modes of convergence, laws of large numbers, conditional expectation, Fourier transforms and characteristic functions, Gaussian random variables, convergence of measures, convergence in distribution, discrete-time stochastic processes, martingales, and Markov chains. The reader's work is greatly facilitated by the inclusion, in every chapter, of numerous exercises, all accompanied by detailed solutions that often provide substantial extensions to the theoretical material.

21.
arXiv (CS.LG) 2026-06-11

What Uncertainties Do We Need for Dynamical Systems?

arXiv:2606.11988v1 Announce Type: new Abstract: The distinction between aleatoric and epistemic uncertainty has received considerable attention in machine learning research, mainly in the context of supervised learning but also in other settings such as generative modeling. In this paper, we offer a machine learning perspective on uncertainty modeling for dynamical systems, which has been studied much less so far. In particular, we ask: what uncertainties do we need for dynamical systems? We discuss sources of uncertainty, clarify their nature (aleatoric or epistemic), and consider how the objectives of representing and quantifying uncertainty vary across different tasks.

22.
arXiv (CS.CV) 2026-06-11

UniReason-Med: A Shared Grounded Reasoning Interface for 2D-to-3D Transfer in Medical VQA

We study whether grounded reasoning supervision from abundant 2D medical images can improve 3D medical VQA when both input types are aligned through a common reasoning interface. We introduce UniReason-Med, a single-checkpoint framework that processes either a 2D image or a slice-serialized 3D volume at inference time, generating interleaved textual reasoning and localized visual evidence through shared box syntax, region-token injection, and a common grounded reasoning policy. To train this interface, we construct UniMed-CoT, a 220K instruction-tuning dataset with interleaved textual reasoning and grounded visual evidence, including 170K 2D and 50K 3D samples. Through supervised fine-tuning followed by outcome-level reinforcement learning, UniReason-Med learns to generate grounded reasoning traces without IoU/Dice-based localization rewards during RL. Data-mixture and component ablations show that joint 2D+3D grounded supervision substantially improves 3D reasoning over 3D-only training, while grounding and region-token injection consistently benefit both 2D and 3D tasks. These results suggest that a shared grounded reasoning interface can transfer reasoning structure from 2D images to slice-serialized volumetric medical understanding. The code and data are publicly available at https://github.com/IQuestLab/unireason-med.

23.
arXiv (CS.CV) 2026-06-16

NEXUS: Neural Energy Fields for Physically Consistent Contact-Rich 3D Object Dynamics

Physics-grounded video generation requires controllable 3D object dynamics that remain physically consistent under contact, deformation, and external forcing. Existing trajectory-based methods often model isolated physical effects, making it difficult to compose conservative and non-conservative dynamics in contact-rich 3D scenes. We present NEXUS, a neural energy-field framework for contact-rich 3D object dynamics. NEXUS represents each object as a structural graph and constructs dynamic object-object and object-environment contact graphs. Inspired by Hamiltonian Neural Networks, NEXUS formulates motion through scalar energy and dissipation terms rather than directly predicting states or accelerations. Conservative effects, including gravity and elastic deformation, are composed as additive energy terms, while non-conservative effects such as damping and impact-induced energy loss are modeled with learned Rayleigh-style dissipation. Forces are derived by differentiating the energy and dissipation functions and rolled out with a multi-substep semi-implicit integrator. Across controlled trajectory benchmarks, NEXUS improves long-horizon accuracy over representative learned and physics-structured dynamics baselines under varying mechanical properties and physical-effect compositions. We further show that NEXUS trajectories provide effective guidance for contact-rich video generation, improving physical plausibility while maintaining competitive visual quality.

24.
arXiv (CS.LG) 2026-06-12

FedBiCross: Personalized One-Shot Federated Learning on Medical Images

arXiv:2601.01901v4 Announce Type: replace Abstract: Data-free knowledge distillation-based one-shot federated learning (OSFL) trains a model in a single communication round without sharing raw data, making OSFL attractive for privacy-sensitive medical applications. However, existing methods aggregate predictions from all clients to form a global teacher. Under non-IID data, conflicting predictions dilute each other during averaging, yielding less informative soft labels that weaken distillation. We propose FedBiCross, a personalized OSFL framework with three stages: (1) clustering clients by model output similarity to form coherent sub-ensembles, (2) bi-level cross-cluster optimization that learns adaptive weights to selectively leverage beneficial cross-cluster knowledge while suppressing negative transfer, and (3) personalized distillation for client-specific adaptation. Experiments on four medical image datasets demonstrate that FedBiCross consistently outperforms state-of-the-art baselines across different non-IID degrees.

25.
arXiv (CS.CL) 2026-06-19

CREDENCE: Claim Reduction for Decomposition & Enhanced Credibility – Semantic Metrics and Convergence Analysis

Decomposing compound sentences into atomic, verifiable claims is a prerequisite for reliable automated fact-checking. Prior work has relied on token-overlap (Jaccard) metrics that systematically underestimate decomposition quality for paraphrastic claims, and has lacked formal termination analysis for the repair loop. We present Credence, a revised claim decomposition and evaluation framework addressing both shortcomings. Our contributions are: (1) Semantic-F1: we use BGE-large cosine similarity fidelity metric that resolves Jaccard's penalisation and improves downstream fact-checking accuracy; (2) Convergence theorems: we formally characterise four properties of the repair pipeline, establishing that rule-based repair is monotone and finitely terminating under an oracle parser assumption; LLM-based self-repair is provably non-monotone and requires an early-exit guard; (3) Three evaluation benchmarks spanning social-media, encyclopaedic, and news domains for cross-domain generalisation measurement; (4) Multi-model benchmarking across four decomposer models (3.8B-12B) and a closed API model. Experiments on SocialClaimSplit, WikiSplitBench, and ClaimDecompBench show that Semantic-F1 outperforms Jaccard-F1 by +15-32pp. EPR ranges from 0.94 to 1.00 on SocialClaimSplit and WikiSplitBench, while ClaimDecompBench includes lower base EPR cases (down to 0.824) due to harder news-domain constructions, and rule-repair reduces the Atomicity Violation Rate (AVR) by 47-100% relative to the base model without degrading fidelity.