Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-11

Bridging the Morphology Gap: Adapting VLA Models to Dexterous Manipulation via Intent-Conditioned Fine-Tuning

arXiv:2606.12109v1 Announce Type: cross Abstract: Vision-Language-Action (VLA) models have demonstrated remarkable zero-shot generalization in robotic manipulation, yet the vast majority of pre-trained pipelines remain strictly confined to low-DoF parallel grippers. Adapting these rich semantic priors to high-DoF dexterous hands introduces a severe morphology gap, direct end-to-end joint fine-tuning inherently causes catastrophic forgetting of spatial reasoning and acute action manifold collapse due to data scarcity. In this paper, we present InDex, a novel, data-efficient adaptation framework rooted in cross-morphology semantic inheritance. Rather than discarding the pre-trained 1-DoF parallel grasp output, we repurpose it as a continuous, macroscopic virtual grasp intent proxy to sequentialize the control topology. We implement a two-stage decoupled learning architecture: the first stage parameter-efficiently aligns the VLA backbone to predict continuous arm trajectories and the scalar grasp intent; the second stage freezes this spatial backbone and leverages an intent-conditioned denoising diffusion head to decode fine-grained joint articulations for multi-fingered end-effectors. Extensive simulation benchmarks across a suite of multi-stage, contact-rich dexterous manipulation tasks demonstrate that InDex effectively masters intricate skills with minimal demonstration data, substantially outperforming monolithic baselines while preserving the robust spatial generalizability of the original VLA prior.

02.
arXiv (quant-ph) 2026-06-17

Pulse-optimised circuit elements for scalable and noise-resilient quantum chemistry

arXiv:2606.17357v1 Announce Type: new Abstract: Useful chemistry calculations on near-term quantum processors are hindered by current algorithmic runtimes. We develop a methodology to significantly reduce these runtimes. Typically, variational quantum eigensolver (VQE) algorithms are implemented as sequences of primitive gates. Our methodology instead relies on gradient-ascent pulse engineering to construct hardware-tailored pulses for the direct implementation of VQEs. As problem sizes increase, it quickly becomes intractable to optimise a pulse that implements an entire VQE ansatz circuit. However, leading VQEs are constructed in a modular fashion. A problem-tailored VQE is assembled from parameterised circuit elements that simulate hopping between two or four electronic spin orbitals. We show that these circuit elements can be implemented more efficiently using hardware-tailored pulses. We numerically demonstrate our methodology on a silicon spin-qubit quantum processor. We find that common circuit elements, known as single- and double-qubit excitations, can be implemented in less than 289 ns and 927 ns, respectively. Compared with conventional gate-based implementations, our pulse-accelerated qubit excitations provide a scalable approach for faster and therefore more noise-robust quantum chemistry simulations by reducing VQE runtimes by up to a factor of 15.3.

03.
arXiv (CS.LG) 2026-06-24

SkyJEPA: Learning Long-Horizon World Models for Zero-Shot Sim-to-Real Control of Quadrotors

arXiv:2606.23444v2 Announce Type: replace-cross Abstract: Accurate dynamics models are critical for informed decision-making in robotic systems, particularly for agile aerial vehicles operating under uncertainty. Neural network dynamics models are attractive for capturing complex nonlinear effects, but existing predictive approaches struggle with long-horizon forecasting because their autoregressive rollout mechanism amplifies errors over time. Joint Embedding Predictive Architectures (JEPAs) offer a compelling alternative by modeling dynamics in latent space, yet prior JEPA-style methods for robot navigation have been studied primarily for kinematic-level planning, with limited investigation in high-frequency control. In this work, we introduce the JEPA-style model for real-time quadrotor control. The proposed approach combines a latent dynamics model with a novel physics-inspired prober that maps frozen latents to interpretable state, enabling physically grounded long-horizon prediction. Additionally, we combine the learned model with a sampling-based optimal control solution to take advantage of its predictive capabilities for real-time control on embedded hardware. Finally, to reduce the dependence on expensive and unsafe real-world data collection, we develop a structured pipeline for automated dataset generation. Extensive open-loop and outdoor closed-loop experiments demonstrate accurate prediction, robust zero-shot sim-to-real transfer, and strong generalization across diverse operating conditions.

04.
arXiv (CS.LG) 2026-06-19

Stabilizing Bandits using Regularization: Precise Regret and A Quantitative Central Limit Theorem

arXiv:2603.10184v2 Announce Type: replace-cross Abstract: Statistical inference with bandit data presents fundamental challenges owing to adaptive sampling, which violates the independence assumptions underlying classical asymptotic theory. Recent work has identified stability~\citep{laiwei82} as a sufficient condition for valid inference under adaptivity. This paper first provides a refined stability condition, stated in terms of the iterates of an online algorithm, and shows that a large class of regularized stochastic-mirror-descent-style algorithms satisfy it. This refined condition allows us to strengthen the asymptotic results of~\citet{laiwei82} in several ways. First, we derive a non-asymptotic Berry–Esseen bound for the empirical reward estimates under adaptive sampling. Second, we derive matching non-asymptotic upper and lower bounds on the regret of the proposed algorithm, yielding a precise characterization of its regret. Third, we show that these regularized algorithms preserve asymptotic normality and valid inference under a prescribed level of adversarial corruption. Finally, we show that regularization is necessary rather than incidental: Lai–Wei stability is incompatible with the optimal $O(\sqrt{T})$ regret rate – the rate attained by unregularized algorithms such as EXP3 – so that a controlled, polylogarithmic inflation in regret is the price of valid inference.

05.
arXiv (math.PR) 2026-06-12

Dimension-free Markov–Bernstein inequalities for product measures

作者:

arXiv:2606.13575v1 Announce Type: cross Abstract: We study dimension-free Markov–Bernstein inequalities for polynomials with respect to product probability measures. In the Gaussian case, for $p\ge4$, we prove that \[ \|\nabla f\|_{L^p(\gamma^n)} \le C(p)d^{\frac12+\theta_p} \|f\|_{L^p(\gamma^n)} \] for every polynomial $f$ of degree at most $d$, where $\theta_p\le \frac{2}{3p}$ and $\theta_p=0$ whenever $p$ is an even integer. Thus, for even integer exponents, we establish the sharp dependence on the degree conjectured by Eskenazis–Ivanisvili. For general $p\ge4$, the estimate improves upon their dimension-free inequality. We also obtain dimension-free Markov–Bernstein inequalities with sharp dependence on the degree for even integer exponents beyond the Gaussian setting. We first prove such estimates for the uniform distribution on the unit cube and then extend them to products of absolutely continuous measures with unimodal densities. Finally, we treat products of one-dimensional Freud measures with densities proportional to $e^{-|t|^{2m}}$.

07.
arXiv (CS.AI) 2026-06-11

Estimating Tail Risks in Language Model Output Distributions

arXiv:2604.22167v2 Announce Type: replace-cross Abstract: Language models are increasingly capable and are being rapidly deployed on a population-level scale. As a result, the safety of these models is increasingly high-stakes. Fortunately, advances in alignment have significantly reduced the likelihood of harmful model outputs. However, when models are queried billions of times in a day, even rare worst-case behaviors will occur. Current safety evaluations focus on capturing the distribution of inputs that yield harmful outputs. These evaluations disregard the probabilistic nature of models and their tail output behavior. To measure this tail risk, we propose a method to efficiently estimate the probability of harmful outputs for any input query. Instead of naive brute-force sampling from the target model, where harmful outputs could be rare, we operationalize importance sampling by creating unsafe versions of the target model. These unsafe versions enable sample-efficient estimation by making harmful outputs more probable. On benchmarks measuring misuse and misalignment, these estimates match brute-force Monte Carlo estimates using 10-20x fewer samples. For example, we can estimate probability of harmful outputs on the order of 10^-4 with just 500 samples. Additionally, we find that these harmfulness estimates can reveal the sensitivity of models to perturbations in model input and predict deployment risks. Our work demonstrates that accurate rare-event estimation is both critical and feasible for safety evaluations. Code is available at https://github.com/rangell/LMTailRisk

08.
arXiv (CS.CL) 2026-06-24

An LLM-based Two-Stage Transformer Framework for Cross-Domain Bearing Fault Diagnosis with Limited Data

Bearing fault diagnosis faces critical challenges when dataset heterogeneity, operating condition variations, and limited labeled data occur simultaneously in industrial environments. Existing approaches address these issues in isolation and rely on implicit feature alignment, limiting effectiveness under concurrent challenges. This paper proposes a knowledge-guided two-stage transfer learning framework that employs a lightweight GPT-2-style Transformer with causal self-attention for hierarchical feature extraction from vibration signals, establishing explicit pathways where pre-trained encoder weights and fault prototype embeddings serve as knowledge carriers from multi-source pre-training to target adaptation. The framework addresses the dual-shift challenge through multi-source learning for generalizable representations, prototype-based knowledge modulation for target adaptation, and taxonomy-adaptive classification for seamless transfer across heterogeneous fault categories. Experimental validation on four real-world datasets demonstrates 92.61% average accuracy with only 10% labeled target data, outperforming state-of-the-art methods by 17.24 percentage points, establishing a practical pathway toward cost-effective predictive maintenance in Industry 4.0 applications.

09.
arXiv (CS.LG) 2026-06-15

IntSeqBERT: Learning Arithmetic Structure in OEIS via Modulo-Spectrum Embeddings

arXiv:2603.05556v2 Announce Type: replace Abstract: Integer sequences in the OEIS span values from single-digit constants to astronomical factorials and exponentials, making prediction challenging for standard tokenised models that cannot handle out-of-vocabulary values or exploit periodic arithmetic structure. We present IntSeqBERT, a dual-stream Transformer encoder for masked integer-sequence modelling on OEIS. Each sequence element is encoded along two complementary axes: a continuous log-scale magnitude embedding and sin/cos modulo embeddings for 100 residues (moduli $2$–$101$), fused via FiLM. Three prediction heads (magnitude regression, sign classification, and modulo prediction for 100 moduli) are trained jointly on 274,705 OEIS sequences. At the Large scale (91.5M parameters), IntSeqBERT achieves 95.85% magnitude accuracy and 50.38% Mean Modulo Accuracy (MMA) on the test set, outperforming a standard tokenised Transformer baseline by $+8.9$ pt and $+4.5$ pt, respectively. An ablation removing the modulo stream confirms it accounts for $+15.2$ pt of the MMA gain and contributes an additional $+6.2$ pt to magnitude accuracy. A probabilistic Chinese Remainder Theorem (CRT)-based Solver converts the model's predictions into concrete integers, yielding a 7.4-fold improvement in next-term prediction over the tokenised-Transformer baseline (Top-1: 19.09% vs. 2.59%). Modulo spectrum analysis reveals a strong negative correlation between Normalised Information Gain (NIG) and Euler's totient ratio $\varphi(m)/m$ ($r = -0.851$, $p < 10^{-28}$), providing empirical evidence that composite moduli capture OEIS arithmetic structure more efficiently via CRT aggregation.

10.
Nature (Science) 2026-06-10

Improved quantum processor logical error rates via correction and detection

作者:

Performing quantum algorithms for critical problems in physics and chemistry requires substantially lower error rates than the physical error rates of present quantum computers. Achieving such low logical error rates requires quantum error correction1,2 and physical error rates below a critical threshold value3–8. We experimentally demonstrate on a trapped-ion quantum charge-coupled device (QCCD)9,10 improvements in logical error rates ranging from 11× to 800× compared with several physical circuit baselines, including quantum computation on multiple qubits. Our results hinge on two quantum error correction code constructions optimized for an ion-trap processor: a 12-qubit code encoding two qubits inspired by Knill11 and a 16-qubit tesseract colour code encoding four qubits12,13. These constructions are combined with a scalable method of error detection and post-selection to achieve reduced logical error rates. Our results show that state-of-the-art quantum devices are already able to make use of fault tolerance and error correction to strongly suppress errors in non-trivial quantum circuit computations. Experimental demonstration of quantum error-correcting codes combined with error detection and post-selection applied to a trapped-ion quantum processor shows improvements in logical error rates ranging from 11× to 800× compared with several physical circuit baselines.

11.
arXiv (CS.CV) 2026-06-12

Learning Task-Aware Sampling with Shared Saliency through Density-Equalizing Mappings

In image and surface-based learning tasks, convolutional features are typically extracted using receptive fields that are sampled uniformly across the entire domain. However, informative structures are rarely distributed uniformly in practice and are often concentrated in localized regions. Such phenomena are particularly common in medical imaging, where pathological changes are spatially confined. Consequently, uniform convolution allocates equal computational effort to both informative and uninformative regions, resulting in inefficient feature extraction and suboptimal utilization of model capacity. To address this issue, we propose a framework for task-adaptive sampling that dynamically redistributes computational attention according to the spatial importance of the data. Specifically, we introduce the Density-Equalizing Convolutional Neural Network (DECNN), which employs density-equalizing mappings to guide convolution through a learned density function. The density function encodes the relative importance of different regions and induces a transformation that enlarges informative areas while compressing less relevant ones. As a result, convolutional receptive fields are redistributed non-uniformly over the domain, enabling denser sampling in task-relevant regions. By coupling this importance-driven transformation with convolution, DECNN performs adaptive feature extraction that focuses computational resources on informative structures. This leads to more efficient use of model capacity, yielding a lightweight yet expressive architecture while simultaneously producing an interpretable saliency map. Experiments on image classification and craniofacial surface analysis demonstrate that DECNN achieves competitive or superior performance with fewer parameters, accurately identifies task-relevant regions, and remains robust under complex geometric variations.

12.
arXiv (CS.AI) 2026-06-16

TechRAG: Evidence-Gated Multimodal Agentic RAG for Technical Literature Reasoning

arXiv:2606.01613v2 Announce Type: replace-cross Abstract: This paper presents an agentic multimodal retrieval-augmented generation (RAG) framework for domain-specific literature reasoning, instantiated on a curated corpus of several thousand papers in intelligent tires, vehicle dynamics, vehicle control, sensing, estimation, and machine learning. Unlike conventional single-pass RAG systems, the proposed architecture uses an autonomous, evidence-gated pipeline that classifies query intent, generates separate text and visual query rewrites, performs hybrid text retrieval with FAISS and BM25 followed by cross-encoder reranking, expands evidence through graph-guided chunk traversal over a Neo4j knowledge graph, and retrieves visual document evidence using ColSmol late-interaction embeddings with MUVERA fixed-dimensional encoding, approximate nearest-neighbor search, and MaxSim reranking. The framework scores evidence sufficiency using a 100-point rubric with hybrid rule-based/LLM review, retries retrieval through drift-guarded reformulation, searches external academic databases through optimize–search–vet loops, merges and deduplicates multimodal evidence, verifies citation integrity, and generates cited answers through Planner, Researcher, Writer, and Critic agents with self-correcting revision. Key contributions include: (i) a scalable multimodal retrieval architecture combining text, graph, and visual evidence over 40,000 document pages; (ii) an interpretable evidence sufficiency and retry mechanism; (iii) a multi-agent generation pipeline with evidence mapping and critic-driven revision; (iv) a domain knowledge graph with LLM-based entity extraction, OpenAlex author validation, and intra-corpus citation resolution; and (v) a route-dependent external search architecture for targeted literature expansion. The result is a practical, evidence-gated, multimodal agentic RAG architecture for technical reasoning over specialized research corpora.

13.
arXiv (CS.CV) 2026-06-19

Fast Human Attention Prediction for Fixation-guided Active Perception in Autonomous Navigation

Human visual attention relies on structured scanpaths to efficiently process scenes, yet instilling this behavior into robot autonomy is in its infancy and hindered by the high,computational costs of existing predictive models. To address this, we introduce GazeLNN, a computationally lightweight,scanpath prediction model that leverages Liquid Neural Networks as its recurrent engine and employs MobileNetV3 for feature extraction. Operating auto-regressively, the architecture predicts sequential fixation heatmaps conditioned on the current visual stimulus and fixation history. Despite requiring only 0.61 GFLOPs, GazeLNN achieves state-of-the-art performance on the MIT Low Resolution dataset achieving 0.47 ScanMatch score. It outperforms existing recurrent baselines across diverse evaluation metrics, while reducing computational costs by 99.40% and accelerating inference by up to six times. To investigate the role of human attention modeling in robot autonomy and demonstrate the practical utility of this highly efficient architecture, we integrate GazeLNN into an active camera-robot control policy trained via Reinforcement Learning. This integration enables human-fixation-guided perception during autonomous navigation, validated through successful real-world deployments on an aerial robot.

14.
arXiv (CS.AI) 2026-06-12

From AGI to ASI

arXiv:2606.12683v1 Announce Type: new Abstract: Over the last decade, building human-level artificial general intelligence has moved from far-fetched speculation to being a concrete next-decade target for many of the largest AI organisations. Achieving this goal would have profound and far-reaching impacts on human society, which raises many complex questions for the decade ahead. This report investigates how AI itself might continue to develop in a post-AGI world along the continuum of machine intelligence. The endpoint of this continuum, Universal AI, is theoretically well understood, which provides some formal grounding for the main focus of this report: the transition from human-level AGI to artificial general superintelligence, which, intuitively, can be understood as a system that is more intelligent and cognitively capable than large organisations of humans. After characterizing ASI, the report discusses four potential pathways from AGI to ASI: scaling AGI, AI paradigm shifts, recursive improvement, and ASI emerging from large-scale multi-agent collectives. The report then discusses possible frictions and bottlenecks along these pathways. Determining whether the impact of these frictions will be negligible or substantial raises a number of concrete open research questions. Due to large uncertainties for predicting ASI progress, it cannot be ruled out that AI progress might continue to accelerate over the next years. This could imply that the image of a single transformative step change, caused by the introduction of human-level AGI into our society, could be inaccurate. More apt might be the prospect of a series of transformative societal changes caused by AI-enabled progress and breakthroughs across many areas of science and technology. Preparing for this prospect requires a massively interdisciplinary endeavour of global scope and interest.

15.
arXiv (quant-ph) 2026-06-15

Spin disorder competing with positional symmetry breaking governs the metal-insulator behavior in oxide paramagnets

arXiv:2606.14624v1 Announce Type: cross Abstract: Numerous transition-metal oxides have low-temperature antiferromagnetic (AFM) states and high-temperature paramagnetic (PM) phases, where the AFM state is usually insulating while the PM phase can be either insulating or metallic. Without involving strong correlation, we use symmetry-broken density-functional theory (DFT) to obtain the PM phases of insulating NaFeO3 vs the recently discovered metallic NaOsO3. We develop the understanding of insulating and metallic behaviors in paramagnetic oxides by analyzing the interactions between magnetic and positional symmetry breaking: The insulating gap is governed by the competition between the spin disorder that induces a distribution of different magnitudes of local magnetic moments and the polymorphous distribution of off-center atomic displacements. NaFeO3, on the other hand, has large positional displacement with small spin-disorder-induced moments distribution, leading to insulating PM phase, whereas NaOsO3 has a pronounced spin-disorder-induced moments distribution that forces the PM phase to become metallic. Our work identifies this symmetry-breaking competition as a general framework to bridge seemingly disparate metal-insulator behaviors in transition-metal oxides paramagnets without invoking strong correlation.

16.
arXiv (CS.CV) 2026-06-11

Latent Geometric Chords for Query-Efficient Decision-Based Adversarial Attacks

While decision-based black-box adversarial attacks present a severe security threat, current methodologies suffer from fundamental limitations. Pixel-wise attacks frequently introduce unnatural, high-frequency visual artifacts, while latent-space frameworks are confined by the limited search space of low-dimensional manifolds and inherent reconstruction flaws. To resolve these limitations, we propose Latent Geometric Chords (LGC) for Query-Efficient Decision-Based Adversarial Attacks alongside a variant, LGC-H. At its core, LGC navigates decision boundaries by executing a curvature-aware geometric search within a compressed semantic manifold. To guarantee high visual fidelity and circumvent dimensionality bottlenecks, we introduce a Residual-based Adversarial Generation (RAG) mechanism. RAG isolates semantic perturbations as geometric chords and superimposes them directly onto the original source image. RAG substantially resolves baseline reconstruction flaws and effectively doubles the permissible search space dimensions. Experimental results demonstrate that LGC achieves robust cross-dataset transferability and substantially outperforms state-of-the-art baselines. Notably, our method, LGC, minimizes perturbation magnitudes while achieving state-of-the-art visual fidelity–with a Structural Similarity Index Measure (SSIM) exceeding 0.99 and a Learned Perceptual Image Patch Similarity (LPIPS) below 0.01 at 5000 queries–and sustaining high attack success rates under stringent perceptual constraints, successfully compromising adversarially trained robust models. The source code is available at: https://github.com/eihmuekhine/Latent-Geometric-Chords.

17.
bioRxiv (Bioinfo) 2026-06-18

segSHAPE: RNA secondary structure prediction from nanopore direct RNA sequencing

RNAs adopt complex structures that regulate key biological processes, making accurate structure prediction essential. Chemical probing coupled with Nanopore direct RNA sequencing (DRS) offers a route to single-molecule structural inference, but current tools are limited by inaccurate signal-to-sequence alignment, which degrades modification-rate estimation and downstream structure prediction. Here we introduce segSHAPE for RNA secondary structure prediction from Nanopore DRS data (both RNA002 and RNA004 chemistries), a probe-agnostic framework that improves signal alignment using prior information of basecalling and per-read signal baseline shift correction, learns position-specific k-mer raw signal parameters, and estimates per-nucleotide modification rates with an unsupervised anomaly detector. On three public RNA002 DRS datasets spanning different chemical probes (AcIm, NAI-N3) and RNAs from 421 to 1552 nt, segSHAPE achieves the highest F1 score and Matthews correlation coefficient (MCC) on all RNAs, exceeding the strongest baseline by 3.4 to 5.8 percentage points in MCC. It additionally captures the ligand-induced conformational change of the thiamine pyrophosphate (TPP) riboswitch RNA directly from RNA002 DRS data using the DEPC probe. On a public RNA004 DRS dataset, segSHAPE improves over the sm-PORE-cupine baseline by 17 ROC-AUC points in modification rate estimation and by 6.7 MCC points in structure prediction. These results establish segSHAPE as a unified, probe-agnostic pipeline for RNA structure prediction from Nanopore DRS data.

18.
arXiv (CS.LG) 2026-06-12

ResidualPlanner+: a scalable matrix mechanism for marginals and beyond

arXiv:2305.08175v5 Announce Type: replace-cross Abstract: Noisy marginals are a common form of confidentiality protecting data release and are useful for many downstream tasks such as contingency table analysis, construction of Bayesian networks, and even synthetic data generation. Privacy mechanisms that provide unbiased noisy answers to linear queries (such as marginals) are known as matrix mechanisms. We propose ResidualPlanner and ResidualPlanner+, two highly scalable matrix mechanisms. ResidualPlanner is both optimal and scalable for answering marginal queries with Gaussian noise, while ResidualPlanner+ provides support for more general workloads, such as combinations of marginals and range queries or prefix-sum queries. ResidualPlanner can optimize for many loss functions that can be written as a convex function of marginal variances (prior work was restricted to just one predefined objective function). ResidualPlanner can optimize the accuracy of marginals in large scale settings in seconds, even when the previous state of the art (HDMM) runs out of memory. It even runs on datasets with 100 attributes in a couple of minutes. Furthermore, ResidualPlanner can efficiently compute variance/covariance values for each marginal (prior methods quickly run out of memory, even for relatively small datasets). ResidualPlanner+ provides support for more complex workloads that combine marginal and range/prefix-sum queries (e.g., a marginal on race, a range query on age, and a combined race/age tabulation that answers age range queries for each race). It even supports custom user-defined workloads on different attributes. With this added flexibility, ResidualPlanner+ is not necessarily optimal, however it is still extremely scalable and outperforms the prior state-of-the-art (HDMM) on prefix-sum queries both in terms of accuracy and speed.

19.
arXiv (CS.CV) 2026-06-11

From Simulation to Real-World: An In-Field 6D Pose Dataset and Baseline for Robotic Strawberry Harvesting

Robotic strawberry harvesting requires precise 6D pose estimation; however, collecting 6D pose ground truth in real agricultural fields is inherently challenging. Existing 6D pose estimation methods have therefore relied solely on synthetic data that lacks scene-level realism, leaving their performance under real agricultural field conditions unquantified. In this work, we present, to the best of our knowledge, the first real-world 6D pose ground truth dataset of strawberries collected in actual agricultural fields (12,040 images). We also introduce a synthetic dataset rendered in NVIDIA Isaac Sim, featuring scene-level realism and domain randomization. Nevertheless, our experiments reveal that a significant sim-to-real gap persists, underscoring the necessity of real agricultural field data for reliable evaluation. We further quantify the sim-to-real gap through baseline 6D pose estimation results across backbone encoders, serving as a reference for future work. The real-world dataset will be made available upon acceptance.

20.
arXiv (CS.AI) 2026-06-24

Catastrophic Compositional Generation: Why Vanilla Diffusion Models Fail to Extrapolate

arXiv:2606.23920v1 Announce Type: cross Abstract: The task of compositional generation involves using a conditional generative model, trained only on a subset of the possible conditions, to produce samples from compositionally-defined target distributions such as a geometric combination of the source distributions. In this work, we argue that this task is often infeasible for vanilla conditional diffusion models: we conjecture that no inference-time technique can efficiently produce samples from the target distribution in certain well-motivated settings. This idea is supported by theory-guided generalization arguments and carefully-designed experiments on both synthetic and realistic data. In particular, while recent methods such as Feynman-Kac correction reduce inference-time approximation error, our results show that score estimation error has a more catastrophic effect on performance when the target distribution is out-of-distribution with respect to the sources, highlighting the need for a different approach to this task.

21.
arXiv (CS.LG) 2026-06-12

Deep Learning-based Algebraic Reynolds Stress Closures for RANS Simulations of Turbulent Flows

arXiv:2605.26358v2 Announce Type: replace-cross Abstract: Turbulence is ubiquitous in engineering and science, yet direct simulation is prohibitively expensive. The Reynolds-averaged Navier-Stokes (RANS) equations provide savings exceeding ten orders of magnitude but introduce unclosed terms (the closure problem). Offline-trained machine-learning (ML) closures suffer distribution shift in predictive simulations, while ML methods that bypass the governing equations struggle to generalise from scarce high-fidelity data. We develop a physics-derived deep learning closure model for RANS, the Deep Algebraic Reynolds Stress Model (DARSM), which can be trained on small datasets and accurately generalise across Reynolds numbers, to unseen geometries, and to different flow regimes. A neural network maps flow invariants to empirical parameters in an implicit algebraic Reynolds stress equation, derived from the Reynolds stress transport equations under the weak-equilibrium assumption, imposing physics-based structure on the ML closure. End-to-end optimisation through the governing PDEs and the coupled implicit closure eliminates distribution shift, but both unrolled and implicit automatic differentiation fail on the stiff coupled solver. We derive adjoint equations that exploit the solver's implicit-explicit structure for efficient optimisation. On canonical square-duct and periodic-hill benchmarks, DARSM reduces average test velocity error over baseline RANS by $2$-$4\times$ across Reynolds number, geometries, and flow regimes, with peak case-level reductions of $12\times$. The model trained on attached, anisotropy-dominated flows (square duct) accurately generalises without retraining to separated flows (periodic hills), a regime change in the underlying physics. DARSM also outperforms five established ML methods: offline training, tensor-basis neural networks, field-inversion machine learning, DeepONets, and physics-informed neural networks.

22.
arXiv (CS.CV) 2026-06-12

Why Commodity WiFi Sensors Fail at Multi-Person Gait Identification: A Systematic Analysis Using ESP32

WiFi Channel State Information (CSI) has shown promise for single-person gait identification, raising interest in its use for contactless biometrics, continuous authentication, and passive identification. However, the feasibility of multi-person identification on low-cost commodity devices remains unclear. A critical question is whether weak multi-person performance is primarily an algorithmic limitation, or whether it reflects a more fundamental sensing ceiling on commodity WiFi hardware. We address this question through a systematic empirical study using commodity ESP32 WiFi sensors. We evaluated six different signal separation methods–FastICA, SOBI, PCA-ICA, NMF, Wavelet, and Tensor decomposition–across seven scenarios spanning 1-10 people in both controlled and realistic indoor environments. To investigate beyond classification accuracy, we introduce three diagnostic metrics: intra-subject variability (ISV), inter-subject distinguishability (ISD), and performance degradation rate (PDR). In all methods, performance remains moderate (39%-56% accuracy), with limited evidence that algorithmic choice alone solves the problem. The best-performing method, NMF, reaches 56% accuracy, while all methods exhibit extremely high feature-space overlap (97%-99%), unstable within-subject representations, and marked environmental sensitivity. These findings suggest that, under commodity ESP32 CSI constraints, dense multi-person gait identification is limited more by sensing quality and spatial diversity than by the chosen separation algorithm. Our results have direct implications for security and privacy: they call into question the practicality of commodity WiFi CSI as a robust multi-user biometric primitive for authentication, while also placing important bounds on the passive identification capabilities achievable with low-cost off-the-shelf WiFi hardware.

23.
arXiv (CS.CL) 2026-06-19

Toward Human-Centered AI-Assisted Terminology Work

Generative AI is likely to transform terminology work by creating new opportunities for automation. At the same time, it raises concerns about the future of terminologists and terminological resources, as efficiency pressures may encourage excessive automation based on the perception that human expertise can be replaced by AI. However, large language models remain unreliable for terminological purposes due to errors, hallucinations, and various forms of bias, making terminologists indispensable for ensuring the accuracy and reliability of terminological data. This paper argues that human-centered AI, an approach that emphasizes that AI's primary goal should be to contribute to human well-being, provides a framework for maximizing the benefits of generative AI while mitigating its risks. It contends that high levels of automation and meaningful human control are compatible and desirable, and that AI should enhance terminologists' capabilities while preserving their agency and decision-making authority. The implications of AI-assisted terminology work are examined through three interrelated dimensions: the augmented terminologist, ethical AI, and human-centered design. In particular, the paper examines how AI integration reshapes the role of the terminologist, affects professional values and working conditions, requires the management of AI-generated bias, and calls for the design of AI tools around the terminologist's needs. The paper concludes that a human-centered orientation is necessary to ensure that AI strengthens, rather than undermines, the essential role of terminology work in supporting specialized communication and the accurate transmission of knowledge across languages and cultures.

24.
arXiv (CS.CV) 2026-06-24

DiffusionBench: On Holistic Evaluation of Diffusion Transformers

Diffusion transformer (DiT) research on image generation has converged to a single evaluation setup: class-conditional generation on ImageNet. While methods improve the FID and related metrics, it is increasingly unclear whether they reflect real progress in generative modeling. The natural alternative, i.e., text-to-image (T2I) generation, is perceived as too costly or inconvenient to train and evaluate and is often skipped. We argue that this perception no longer holds. We introduce NanoGen, a unified DiT training and evaluation framework. NanoGen matches state-of-the-art DiT baselines on ImageNet and, with 12 lines of configuration change, also trains competitive text-to-image models. It currently supports RAE, VAE, pixel-space, and MeanFlow diffusion methods under both ImageNet and T2I setups. Under NanoGen, training T2I requires comparable compute to ImageNet. After training 21 latent diffusion models with NanoGen, we observe that method ranking shows no strong correlation between ImageNet and T2I generation: Pearson correlation is between -0.377 and -0.580 across three metrics. This suggests that a method which improves class-conditional ImageNet FID may show no corresponding improvement on T2I, clearly indicating the necessity of evaluating DiTs on both tasks. To this end, we summarize ImageNet and text-to-image results, which yields DiffusionBench, a holistic benchmark for DiT research. We recommend reporting DiffusionBench in place of ImageNet alone: methods that improve DiffusionBench are more likely to reflect broader progress.

25.
arXiv (CS.AI) 2026-06-17

Multiple cyclicity and Wavelet Decomposition with Channel Correlation for Long-term Time Series Forecasting

arXiv:2606.17996v1 Announce Type: cross Abstract: Cyclicity and trend are important components of time series data and many studies based on cyclicity and trend have achieved good results in long-term time series forecasting. However, we believe that current work neglects the influence of real-world inter-channel correlations in time series data which leads to suboptimal predictions. Furthermore, these models rely on complex designs to capture diverse information so that resulting in low computational efficiency. To address this challenge, we propose McWC, a long-term time series forecasting model that separately models the cyclicity, trend, and inter-channel correlations. Specifically, McWC first decouples cyclical information from data using a multi-layer cyclicity construction module. Then, it extracts inter-channel correlations using multi-layer perceptron. Next, it models and fuses the multi-layer high-frequency and low-frequency information from data using a multi-level wavelet decomposition module. Finally, it aggregates the results of different components to obtain the output. Simultaneously, we decouple intra-channel autocorrelations by calculating a loss function in the frequency domain. Experiments on six real-world datasets demonstrate that McWC achieves state-of-the-art performance, exhibiting excellent computational efficiency and historical information extraction capabilities.