Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-17

Twin-beam advantage in quantum LiDAR under correlated noise

arXiv:2606.17908v1 Announce Type: new Abstract: Quantum light promises improved precision in optical remote sensing, but its practical advantage depends critically on whether nonclassical resources remain useful under realistic noise and experimentally accessible detection. This question becomes especially relevant for LiDAR systems, where a quantum advantage has been demonstrated for target detection and joint range-velocity estimation, but mostly under idealized conditions or simple noise models, such as optical loss and thermal background. A key open point is whether entanglement provides an operational advantage when the dominant disturbance is not independent noise, but structured interference across sensing modes. Here, we address this question by studying the joint estimation of target range and velocity with bright two-mode Gaussian probes and homodyne detection, comparing coherent, separable squeezed, and twin-beam states at a fixed resource budget. Our results reveal a hierarchy of quantum resources set by the noise structure: separable squeezing provides a robust advantage over coherent illumination under loss and thermal background, whereas twin-beam probes become superior under correlated jamming when the receiver is adaptively optimized. These results establish correlated noise as the operational regime in which entanglement provides a robustness advantage beyond local squeezing, opening a receiver-aware route to quantum-enhanced LiDAR in realistic and potentially adversarial environments.

02.
arXiv (CS.AI) 2026-06-16

LearnOpt: Recovering the Latent Cognitive Structure of Standardized Examinations via Knowledge Graphs and Constrained Optimization

arXiv:2606.15349v1 Announce Type: cross Abstract: Standardized examinations are typically treated as uniform syllabus coverage problems. We argue they are better understood as adversarial systems with stable latent cognitive structures diverging systematically from official syllabi. We introduce LearnOpt, which recovers this structure from historical question papers and generates personalized, time-bounded study plans. Applied to nine years of NEET questions (2016-2024, n=1,496), LearnOpt builds an exam knowledge graph from LLM-tagged questions, extracts a five-category latent skill distribution, and formulates study planning as a knapsack-variant optimization over prerequisite-aware subgraphs with Bayesian Knowledge Tracing. Central finding: NEET's latent skill distribution is stable within a syllabus regime (consecutive-year KL divergence 0.004-0.032 for 2016-2021, non-significant under permutation testing) but shifts significantly with NCERT's 2023 syllabus rationalization: pooling 2016-2021 (n=1,072) vs 2023-2024 (n=392) gives KL=0.040 (p=0.0005), with Elimination/Negation questions rising from ~20-29% to ~31-35%. Latent structure, while not permanently stationary, is piecewise stable, with shifts detectable and attributable to curricular events. Within either regime, subject predicts skill profile more strongly than year. An optimization evaluation, using one real and two synthetic mastery profiles, shows the skill-weighted objective produces a modest but real reordering of recommended topics over a mastery-conditioned frequency baseline. Applying the pipeline to JEE Advanced reveals a profile dominated by Multi-concept Integration (80.9% vs. 33.3% for NEET), with a JEE-vs-NEET divergence (KL=0.505) exceeding NEET's largest cross-subject divergence: exam tier shapes latent cognitive structure more than subject, which shapes it more than time within a regime. Code, knowledge graph, and annotated dataset are released publicly.

03.
arXiv (CS.AI) 2026-06-11

Agents All the Way Down; A Methodology for Building Custom AI Agents from Substrate to Production

arXiv:2606.11869v1 Announce Type: cross Abstract: Custom AI agents areagents that live inside their own application, talk to their own data and tools, enforce their own security boundaries, and carry their own brand and audit trail. What separates them from the general-purpose tier is fit, not capability: each is built for one job, by the engineer who will maintain it. No published practice sets out how to build one end to end. The pieces are everywhere (function-calling APIs, the Model Context Protocol, code agents to pair with), but the practice that chains them lives in podcasts, blogs, and leaked system prompts. This paper writes that practice down as a methodology, Agents All the Way Down: two preconditions crossed once and kept, then three practices repeated for the agent's life. The preconditions are (P1) Substrate, the LLM as a software component, framed as tools, then system, then messages under prompt-caching; and (P2) Building blocks: function calling, MCP, CLI orchestration, the liteshell pattern, the agent loop, skills, characters, hooks, and scaffolding. The practices are (P3) prototype with a general-purpose agent; (P4) harvest, fold, and ship the result as a CLI, the Turtle pattern; and (P5) agent-tests-agent, in which a general-purpose agent drives it through behavioural scenarios, a complement to classical testing, not a replacement. The working loop is P3 to P4 to P5 and back, and one corollary falls out for free: multi-agent orchestration is just CLI composition. The methodology is framework-free by construction. It was distilled from the AAC, a custom agent for the open-source LAMB platform, built in about ten days by one developer with an AI pair-programmer and in production . We present it as a transferable practice, independent of any language or framework.

04.
arXiv (math.PR) 2026-06-19

The t-Split Two-Periodic Aztec Diamond Model

arXiv:2606.19507v1 Announce Type: new Abstract: In this work we consider an Aztec diamond model split into two unequal regions which are asymptotically fixed in size. Each region is weighted with a distinct two-periodic weighting. We refer to this model as the t-split two-periodic Aztec diamond, to signify its difference from the previous work title Split Two-Periodic Aztec Diamond, where the model was split into two equal regions. We derive an integral expression for the correlation kernel of the model and give a partial description of the scaling limit behavior, along with a conjecture for the remainder. We refer to the larger and smaller sides of the model as the dominant and non-dominant sides, and to the location of the weight change as the interface. The dominant side exhibits a limit shape that depends only on its own weighting and is identical to that of the two-periodic Aztec diamond, while the non-dominant side appears to have a novel limit shape that depends on both weightings and the location of the interface. Lastly, we consider the complete limit shape in the case where the dominant side two-periodic parameter goes to 0.

05.
arXiv (CS.AI) 2026-06-17

Quantifying Consistency in LLM Logical Reasoning via Structural Uncertainty

arXiv:2606.17312v1 Announce Type: new Abstract: Large language models can arrive at the same answer through reasoning paths that are unstable, contradictory, or difficult to rank consistently – a failure mode especially prevalent in multi-step deductive reasoning. Existing methods assess reliability primarily through output dispersion – measuring how much sampled answers differ – but this discards a complementary signal: whether the model can consistently rank competing reasoning candidates. We propose structural uncertainty, a consistency-aware framework derived from the stability of self-preference-induced rankings over sampled reasoning solutions. Given a query, we generate multiple candidate solutions and ask the model to judge pairwise preferences among its own outputs. We aggregate self-preferences into ranking distributions via Bradley-Terry modeling with PageRank, and decompose the signal into two entropy-based components: across-trial ranking instability and within-trial candidate ambiguity. Across five LLMs and eight benchmarks, structural signals provide information complementary to answer dispersion: on logical and mathematical reasoning tasks, the combination improves identification of unreliable instances, while on factual retrieval the structural signal collapses toward uniformity, diagnosing a regime boundary where reasoning-level consistency evaluation is uninformative. The two components relate differently to accuracy: within-trial ambiguity correlates positively with correctness – consistent with settings where multiple plausible solution paths remain competitive – while across-trial instability correlates negatively, signaling unreliable reasoning. Structural uncertainty is best understood not as a universal confidence estimator, but as a regime-sensitive evaluator of logical reasoning consistency.

07.
PLOS Computational Biology 2026-06-02

A comparative study of simulation-based inference methods for epidemic models with identifiability considerations

作者:

by Geunsoo Jang, K. Selçuk Candan, Gerardo Chowell Epidemic models play a critical role in understanding transmission dynamics, generating forecasts, and informing public health interventions when they are properly calibrated to epidemiological data. Traditional Bayesian inference methods rely on the likelihood function to update prior knowledge using observed data. However, for realistic epidemic models, likelihood functions are often analytically intractable or computationally prohibitive, which can limit the applicability of these methods. Simulation-based inference provides a promising alternative by approximating posterior distributions through forward simulations rather than an explicit likelihood evaluation. In this study, we present a systematic comparison of four approaches: Approximate Bayesian Computation (ABC), Neural Posterior Estimation (NPE), a neural method with temporal embedding, and Preconditioned Neural Posterior Estimation (PNPE), which integrates elements of both classical and neural techniques. These methods are evaluated across epidemic models of increasing complexity under fixed simulation budgets and varying levels of observational noise, with explicit attention to both structural and practical identifiability. Our results show that neural methods generally improve posterior fidelity and predictive accuracy compared with ABC under constrained simulation budgets. PNPE achieved strong performance in several simulation settings, whereas temporal embeddings improved inference in models with complex epidemic dynamics by capturing sequential dependencies. These gains come with important trade-offs: PNPE required substantially greater computational resources and, unlike fully amortized NPE-based methods, may require reconditioning for each new observation. In contrast, ABC remained computationally efficient and provided reasonable, though often more conservative, posterior estimates. Overall, our findings highlight trade-offs among computational efficiency, posterior accuracy, uncertainty calibration, and inference reusability, suggesting that method selection should depend on model complexity, data quality, identifiability, and available computational resources.

08.
arXiv (CS.CL) 2026-06-25

Autodata: An agentic data scientist to create high quality synthetic data

We introduce Autodata, a general method that enables AI agents to act as data scientists who build high quality training and evaluation data. We show how to train (meta-optimize) such a data scientist agent, so that it learns to create even stronger data. We describe the overall formulation, and a specific practical implementation, Agentic Self-Instruct. We conduct experiments on computer science research tasks, legal reasoning tasks and reasoning with mathematical objects, where we obtain improved results compared to classical synthetic dataset creation methods. Further, meta-optimizing the data scientist agent itself delivers an even larger performance uplift. Agentic data creation provides a way to convert increased inference compute into higher quality model training. Overall, we believe this direction has the potential to change the way we build AI data.

09.
arXiv (CS.CL) 2026-06-19

NAMESAKES: Probing Identity Memorization in Text-to-Image Models

Text-to-image (T2I) models generate realistic likenesses of some individuals when prompted with their names, raising privacy concerns. However, distinguishing whether a generated face is memorized or fabricated currently requires ground-truth photos, access to training data, or white-box access to model internals, limiting applicability. We introduce a fully black-box behavioral probe that distinguishes between these regimes while requiring no reference photos or prior knowledge of training data. To benchmark this task, we present the NAMESAKES dataset of over one thousand names and faces of public figures spanning a wide range of fame levels, along with perturbed, less famous names. Experiments on state-of-the-art T2I models show that our probe substantially predicts identity memorization and separates memorized from unrecognized names, with further insights into differences across model families.

10.
arXiv (CS.CV) 2026-06-18

Automatic ply-specific analyses of CFRP micrographs using shortest-path-based ply distinction

We present an automated approach to distinguish between ply instances in semantic segmentation masks of high-resolution carbon-fiber reinforced polymer micrographs. Interpreting the segmentation mask as a graph with pixels as vertices, enables us to use a shortest-path algorithm yielding the ply-separating paths. Thereby, we bridge the gap between semantic segmentation and ply instance segmentation using global information. We successfully apply our approach on high-resolution micrographs featuring a broad range of characteristics like artificially added gaps in single or multiple plies, different stacking sequences and ply traversing cracks. Assigning each fiber pixel to a ply based on the calculated paths, allows for a comprehensive, quantitative ply analysis with respect to its microstructural properties like the local fiber volume fraction as well as locally resolved ply and interleaf layer thickness. These insights help to reveal manufacturing-induced inhomogeneities, draw conclusions on manufacturing parameters and link mechanical properties to underlying microstructural imperfections.

11.
arXiv (CS.CV) 2026-06-11

SCAIL-2: Unifying Controlled Character Animation with End-to-end In-Context Conditioning

Controlled character animation requires transferring motion from a driving sequence to a reference character. Prior works heavily rely on intermediate representations, including pose skeletons to represent motion or masked background to represent environment, which inevitably leads to information loss. To address this, we present SCAIL-2, a framework that bypasses those intermediates and achieves end-to-end character animation. By directly concatenating driving videos to the sequence, the model can obtain all the required visual information from the input video. To address the lack of end-to-end data, we unify sub-tasks of character animation with decoupled conditions and then curate a pipeline to synthesize MotionPair-60K, an end-to-end motion transfer dataset containing heterogeneous tasks of character animation. To achieve the unification, we utilize in-context mask conditioning and mode-specific RoPE as soft guidance beyond textual instructions and raw visual information. To address synthetic discrepancy in detailed regions, we propose Bias-Aware DPO to construct preference items to mitigate the errors. Extensive experiments demonstrate that our method substantially outperforms existing state-of-the-art approaches in various character animation tasks. A large subset of synthetic data as well as model weights will be released at our project page: https://teal024.github.io/SCAIL-2/.

12.
arXiv (CS.CV) 2026-06-25

Cage-based Texture Transfer with Geometric Filtering

Real-time texture transfer expands the creative horizon for interactive applications, enabling seamless detail projection in scenarios that range from digital character cosmetics to procedural automotive texturing. Yet, its practical application is governed by inherent trade-offs between processing speed and suppression of artifacts. Low-latency transfer methods frequently fail to suppress artifacts, and robust alternatives rely on large-scale models that are costly in training and memory. Our proposed method bridges the gap between efficiency and robustness by using a cage-based geometric filtering method to identify Non-Cosmetic Zones (NCZs) for artifact suppression. While other models are resource-intensive and require multiple days of training on manually annotated datasets, we are able to successfully suppress artifacts and achieve immediate deployment on consumer-grade hardware. Our framework achieved highly efficient runtimes of ~70ms on mobile devices for a ~4.8k triangle mesh.

13.
medRxiv (Medicine) 2026-06-22

Agentic Artificial Intelligence for Hospital Readmission Review: A Single-Center Blinded Evaluation and Exploratory Qualitative Analysis

Background: Manual review of 30-day hospital readmissions can identify actionable quality and safety problems, but it is labor-intensive. We developed and evaluated an agentic AI workflow for evidence-grounded readmission review. Materials and methods: We studied adult patients with unplanned 30-day readmission after discharge from a medicine hospitalist service at a single academic health system. An AI agent using a large language model queried a database containing notes, encounters, procedures, laboratory results, and other clinical data, and completed the same structured readmission-review rubric used by physicians. In the primary comparative evaluation, 20 randomly selected readmissions from 2025 were each reviewed by two physicians and the AI system. Blinded physician evaluators rated review quality. After rubric refinement, the AI workflow was applied to 100 recent readmissions in an exploratory expanded-cohort analysis of recurring improvement opportunities. Results: In the primary comparative evaluation, the AI classified 9/20 readmissions (45%) as preventable, compared with 19/40 physician reviews (47.5%). Blinded overall quality ratings were similar for AI and physician reviews (4.35 vs. 4.20 on a 1-5 scale; mean difference 0.15, 95% CI -0.20 to 0.48; p=0.49), as were factuality/support and usefulness/actionability ratings. No AI hallucinations were identified during factuality review. Agreement on preventability and primary readmission category was low for both AI-human and human-human comparisons. The AI system cost $0.23 per chart; physician reviewers took a median of 15 minutes, corresponding to an estimated $42.43 per chart. In the exploratory expanded-cohort analysis, AI-assisted review identified recurring vulnerabilities in post-discharge follow-up plans, incomplete inpatient workups, medication-safety transitions, and indwelling-device transitions. Conclusions: Agentic AI produced readmission reviews with similar blinded quality ratings to physician reviews in this small single-center primary comparative evaluation and supported identification of recurring quality-improvement themes in the exploratory expanded-cohort analysis. Preventability judgments remained variable among both AI and physicians, underscoring the need for human oversight and prospective evaluation before operational use.

14.
arXiv (CS.CV) 2026-06-25

PRISM: Feed-Forward Single-Image 3D Reconstruction via Geometric Warp-Residual Modeling

Reconstructing 3D scenes from a single image is a fundamental challenge in computer vision, with broad applications in virtual reality, robotics, and content creation. Recent methods achieve outstanding performance by leveraging camera-controlled video diffusion models, but rely on iterative diffusion sampling, which greatly limits their practical deployment. We observe that geometric forward warping alone can cover the majority of a target view directly from the input image, with only a compact residual left for the encoder to correct. Motivated by this observation, we propose PRISM, a feed-forward framework that decomposes multi-view latent prediction into a parameter-free geometric prior and a learned residual correction, with no diffusion sampling required at inference. To enable generalization from purely synthetic training data, we devise a two-stage training strategy combining latents supervised distillation for geometric generalization and perceptual fine-tuning for appearance quality optimization. Extensive experiments on three benchmarks demonstrate that PRISM achieves competitive reconstruction quality compared with diffusion-based methods, while reducing inference time dramatically to only 36 seconds per scene.

15.
arXiv (CS.CV) 2026-06-12

Bounding Boxes as Goals: Language-Conditioned Grasping via Neuro-Symbolic Planning

For robotics to be effectively integrated into household or industrial environments, machines must adapt to natural-language prompts in real time. Although Vision-Language Models (VLMs) have enabled zero-shot generalization in robot task and motion planning (TAMP), current state-of-the-art approaches often remain computationally "heavyweight" or require extensive training on thousands of demonstrations. We present GRASP (Grounded Reasoning and Symbolic Planning), a framework designed as a step toward open-vocabulary tabletop manipulation. Our approach leverages a pretrained VLM to translate natural-language queries into neuro-symbolic goal states, grounded in the physical world via a bounding-box detection pipeline. Unlike methods that rely on fixed color lists or hard-coded coordinates, GRASP enables robots to interpret abstract spatial concepts such as "top shelf" and execute tasks without additional fine-tuning. We achieve 73.3% overall success across 90 real-robot trials at three difficulty levels, requiring no task-specific training.

17.
arXiv (CS.LG) 2026-06-16

An RRAM-based Hardware Implementation of a Radial Basis Function Neuron for Edge Classifiers

arXiv:2606.14739v1 Announce Type: cross Abstract: The deployment of modern machine learning (ML) solutions on resource-constrained edge devices highlights implementation challenges. This is especially true for extreme edge applications that include safety-critical components, such as autonomous navigation tasks. This paper demonstrates an artificial neural network (ANN) design leveraging Metal-Oxide Resistive RAM (RRAM) -based Analogue Content Addressable Memory (ACAM) as an efficient hardware substrate for performing metric-based classification and online adaptation on the edge. The proposed design is based on a custom Template piXeL (TXL) cell used for building the ACAM module, where each TXL cell acts as a configurable receptive field neuron. These cells employ a Radial Basis activation function to calculate the distance of an input from the programmed receptive field. The TXL can be organised into dense arrays for calculating the distance of a high-dimensional input against all stored prototypes, effectively performing fast and energy efficient similarity search. This hardware engine enables on-the-fly learning, where the receptive field parameters can be tuned to track domain shift. Through simulation of the proposed TXL-RBF classifier we can achieve 89.1\% accuracy on the MNIST dataset while consuming 185fJ per cell per operation when operating at 100MHz.

18.
arXiv (CS.LG) 2026-06-16

Tangram: Unlocking Non-Uniform KV Cache Compression for Efficient Multi-turn LLM Serving

arXiv:2606.06302v2 Announce Type: replace Abstract: Multi-turn LLM serving accumulates dialogue history whose Key-Value (KV) cache grows with every turn and every user, quickly exceeding the model weights themselves and making memory – not compute – the binding constraint on throughput. Non-uniform KV compression, which allocates heterogeneous budgets across attention heads, preserves accuracy far better than uniform schemes, yet remains impractical: modern serving stacks assume identical KV lengths across heads, so heterogeneity traps freed memory as page fragmentation, spends up to 25% of prefill time reclaiming scattered pages, and skews GPU workloads that inflate decode latency by up to $1.7\times$ or burn 15–20% of each decode step on re-planning. We observe that this heterogeneity need not be discovered at runtime: head-wise retention follows a two-level structural regularity – an input-invariant head ranking with narrowly bounded per-head ratios – that can be calibrated offline from as few as 50 samples. Building on this insight, we present Tangram, a serving framework that statically resolves what prior systems handle dynamically: Budget Reservation fixes each head's post-compression footprint at scheduling time, eliminating page reclamation; Ragged Paging clusters similar-budget heads into independent page tables, turning fragmentation into reclaimable memory; and Ahead-of-Time Load Balancing precomputes balanced GPU partitions with zero runtime planning. Implemented on vLLM, Tangram serves as a drop-in substrate for existing non-uniform compression methods, matching their accuracy while improving end-to-end throughput by up to $2.6\times$ over the full-KV baseline. Our implementation is publicly available at https://github.com/aiha-lab/TANGRAM.

19.
arXiv (CS.LG) 2026-06-24

Subtyping patients with chronic disease using longitudinal BMI patterns

arXiv:2111.05385v3 Announce Type: replace Abstract: Obesity is a major health problem, increasing the risk of various major chronic diseases, such as diabetes, cancer, and stroke. While the role of obesity identified by cross-sectional BMI recordings has been heavily studied, the role of BMI trajectories is much less explored. In this study, we use a machine-learning approach to subtype individuals' risk of developing 18 major chronic diseases by using their BMI trajectories extracted from a large and geographically diverse EHR dataset capturing the health status of around two million individuals for a period of six years. We define nine new interpretable and evidence-based variables based on the BMI trajectories to cluster the patients into subgroups using the k-means clustering method. We thoroughly review each cluster's characteristics in terms of demographic, socioeconomic, and physiological measurement variables to specify the distinct properties of the patients in the clusters. In our experiments, the direct relationship of obesity with diabetes, hypertension, Alzheimer's, and dementia has been re-established and distinct clusters with specific characteristics for several of the chronic diseases have been found to be conforming or complementary to the existing body of knowledge.

20.
medRxiv (Medicine) 2026-06-24

Genetic overlap with schizophrenia and Parkinson's reveals psychomotor basis of physical activity

Background Physical activity levels are altered across neuropsychiatric disorders. While these traits are heritable, the genetic overlap between normal variation in activity levels and neuropsychiatric disorders that involve motor dysfunction such as schizophrenia and Parkinson's disease (PD) remains unexplored. Objectives To investigate the genetic overlap between physical activity, schizophrenia, and PD. Methods Multi-Trait Analysis of genome-wide association studies (GWAS) was used to boost the GWAS power for objectively measured physical activity (n=89,683) by leveraging three GWAS of self-reported activity (n=124,842-377,234). Genetic overlap between the activity, schizophrenia and PD was characterized using linkage disequilibrium score regression, causal mixture modeling, and local genetic correlations. Pleiotropic variants were identified using the conjunctional false discovery rate, annotated to genes, and investigated for enrichment of biological processes, tissue types and association with GWAS-catalog traits. Results Genetic correlations of physical activity with schizophrenia and PD were negligible (rg=-0.02-0.02, p>0.05), but polygenic overlap was substantial, reflecting mixed effect directions. We identified 32 independent variants shared with schizophrenia and 11 with PD, including CRHR1, MAPT and KANSL1 within the 17q21.31 region. Schizophrenia-shared variants mapped to genes differentially expressed in subcortical regions, especially amygdala and basal ganglia. Gene-set analyses revealed enrichment for mental health and cognitive-behavioural traits (schizophrenia-shared genes) versus structural brain phenotypes and neurodegenerative disorders (PD-shared genes). Conclusions Despite negligible genetic correlations, physical activity shares substantial genetic architecture with schizophrenia and PD. Shared genes implicated brain regions and traits spanning motor and cognitive-affective function, consistent with the psychomotor nature of physical activity.

21.
arXiv (quant-ph) 2026-06-12

Quantum Reference Fields Transformations in Linearized Quantum Gravity

arXiv:2606.09344v1 Announce Type: cross Abstract: Diffeomorphism invariance is a central feature of general relativity. Without external reference structures, matter and geometry must be specified relationally, with respect to internal subsystems serving as reference frames. In quantum gravity, these reference systems must themselves be treated as quantum, motivating the use of quantum reference frames. In this work, we address how such a relational description could be formulated within linearized quantum gravity. To this purpose, we introduce quantum reference fields, i.e. sets of four dynamical scalar fields whose stress-energy tensors enter the gravitational constraints. These fields extend the notion of quantum reference frames to local field-theoretic reference systems, allowing matter and gravitational degrees of freedom to be described relationally with respect to physical quantum systems. By generalizing the perspective-neutral construction of quantum reference frames, we show that relational, gauge invariant observables admit reduced descriptions in the perspective of each quantum reference field, and we derive the unitary transformations relating them. The resulting unitary maps implement local quantum coordinate changes between different internal perspectives, and act on the linearized gravitational field with an analogous structure to a linearized diffeomorphism, but with the classical gauge parameter replaced by a physical quantum field. Finally, we construct a relational von Neumann-type measurement scheme, showing how the corresponding reduced observables can be accessed operationally from the perspective of a quantum reference field.

22.
arXiv (quant-ph) 2026-06-15

Multi-entropy in random tensor networks

arXiv:2606.04470v2 Announce Type: replace-cross Abstract: We study the evaluation of Rényi multi-entropies $S^{(q)}_n$ in Random Tensor Network (RTN) states in the large bond-dimension limit. For the case of Rényi index $n=2$ and arbitrary number of parties $q$, we prove that that multi-entropies are determined by minimal multiway cuts through the network. When the minimal multiway cut is degenerate, we characterize the full minimizer set via compatible families of minimal cuts and give a criterion for all minimizers to come from ordinary cut partitions. For $n=2$, this gives a natural generalization of the minimal cut description of bipartite entanglement to multipartite systems with arbitrarily many parties. For the case of integer $n>2$, we show that the minimal multiway cut conjecture is in general not true by providing explicit counter examples for both the single random tensor and for the network built from isometric tilings. We discuss the implication for our results on the multipartite entanglement structures in RTN and holography.

24.
arXiv (CS.AI) 2026-06-16

ARB4WM: An Adversarial Robustness Benchmark for World Models in Continuous Control

arXiv:2606.16605v1 Announce Type: new Abstract: World models are widely used in robotic and agentic engineering control systems due to their ability to learn latent dynamics for planning and decision-making. As these systems are increasingly deployed in safety-critical settings, understanding their robustness under adversarial conditions has become essential. However, existing evaluations lack a unified benchmark for testing adversarial threats across the policy, value, and latent-dynamics levels of world-model agents. To fill this gap, we present ARB4WM, a unified evaluation framework for pre-deployment robustness and risk assessment of world-model agents under visual perturbations. ARB4WM defines five white-box loss objectives across these three levels and studies their effects when combined with single-step or multi-step perturbation strategies and temporal attack modes, including full-frame, half-sequence, and sparse-frame exposure. Specifically, we evaluate four Dreamer-style agents across 20 tasks from MetaWorld and the DeepMind Control Suite under different loss objectives, perturbation strategies, and temporal attack modes. Results show that attacks targeting value estimation, latent representations, and RSSM dynamics can be as damaging as direct policy disruption, and that early or frequent perturbations are especially harmful, while input-level defenses provide limited recovery under adaptive attacks. These findings suggest that safety, risk, and reliability assessment for world models should cover multiple component-oriented attack objectives and temporal exposure protocols rather than relying solely on action-space robustness. Source code is available at https://github.com/zaoanguai/ARB4WM.

25.
arXiv (quant-ph) 2026-06-15

Extensible Fluxonium Architecture Using Tunable Couplers with Low Shunt Capacitance

arXiv:2606.01647v2 Announce Type: replace Abstract: Fluxonium qubits have demonstrated high-fidelity operations and long coherence times in small-scale systems, highlighting their promise for quantum computing. However, large-scale integration into a high-performance two-dimensional (2D) qubit array remains the central challenge for practical applications. In this work, we introduce an extensible architecture for scaling up fluxonium qubits in 2D grids. To address the key challenges, namely achieving controllable strong interaction and high connectivity for qubits featuring small shunting capacitors (footprints), we propose using low-shunt-capacitance couplers to enable tunable interactions between fluxonium qubits. When embedded into 2D square lattices, large couplings can be achieved even with relatively small coupling capacitances, thus enabling multiple connections with sufficient capacitance budget. We further propose coupler realizations based on generalized flux qubit circuits, specifically the quarton and the fluxonium, and demonstrate that both enable fast, high-fidelity gates with low spectator errors, while supporting multiple connections on 2D grids.