Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-11

UniIntervene: Agentic Intervention for Efficient Real-World Reinforcement Learning

arXiv:2606.12372v1 Announce Type: cross Abstract: Human-in-the-loop reinforcement learning (HiL-RL) has emerged as an effective paradigm for real-world robotic manipulation, enabling online policy improvement with human guidance. However, current HiL-RL frameworks remain intervention-intensive, relying on frequent human corrections to redirect the policy out of unproductive exploration, which incurs high labor cost and limits real-world scalability. To address this, we propose UniIntervene, an agentic intervention model that detects unproductive exploration and autonomously recovers the policy toward high-value states, taking over the bulk of interventions from human operators. Specifically, UniIntervene first performs future-conditioned action-value estimation, predicting the latent consequence of the current action and evaluating its induced value, which provides a more stable progress signal. Building on this, a temporal value-risk critic aggregates recent value dynamics and triggers intervention when the estimated value exhibits sustained stagnation or degradation. When intervention is required, UniIntervene retrieves a high-value recovery target from a memory of past intervention episodes and produces executable corrective actions through a goal-conditioned recovery policy. In this way, UniIntervene turns intervention from passive human correction into a value-aware recovery process for efficient real-world RL. Extensive experiments on diverse real-world manipulation tasks demonstrate that UniIntervene improves the average success rate by 8.6% while reducing human interventions by 57% relative to state-of-the-art HiL-RL baselines.

02.
arXiv (CS.AI) 2026-06-18

R2BC: Multi-Agent Imitation Learning from Single-Agent Demonstrations

arXiv:2510.18085v2 Announce Type: replace-cross Abstract: Imitation Learning (IL) is a natural way for humans to teach robots, particularly when high-quality demonstrations are easy to obtain. While IL has been widely applied to single-robot settings, relatively few studies have addressed the extension of these methods to multi-agent systems, especially in settings where a single human must provide demonstrations to a team of collaborating robots. In this paper, we introduce and study Round-Robin Behavior Cloning (R2BC), a method that enables a single human operator to effectively train multi-robot systems through sequential, single-agent demonstrations. Our approach allows the human to teleoperate one agent at a time and incrementally teach multi-agent behavior to the entire system, without requiring demonstrations in the joint multi-agent action space. We show that R2BC methods match, and in some cases surpass, the performance of an oracle behavior cloning approach trained on privileged synchronized demonstrations across four multi-agent simulated tasks. Finally, we deploy R2BC on two physical robot tasks trained using real human demonstrations.

03.
arXiv (CS.AI) 2026-06-11

Latent World Recovery for Multimodal Learning with Missing Modalities

arXiv:2606.12362v1 Announce Type: cross Abstract: We study multimodal learning under missing modalities, with particular motivation from bioscience applications in which heterogeneous modalities are often only partially available when decisions need to be made. We propose Latent World Recovery (LWR), a framework built on two key ideas: (i) modality-specific embeddings from different modalities are aligned in a shared latent space, and (ii) a unified representation is constructed by fusing only the embeddings of the modalities that are actually available at both training and inference time. Rather than imputing missing modalities or requiring a fixed modality set, LWR treats each modality as a partial perception of an underlying latent state and performs availability-aware representation learning directly from the observed modalities. This combination of neighbor-based latent alignment and availability-aware modality fusion enables robust multimodal prediction under partial observation, while avoiding error propagation from explicit reconstruction of missing modalities. We evaluate the proposed framework on real-world incomplete multi-omics benchmarks and demonstrate that it provides an effective approach to downstream tasks such as cancer phenotype classification and survival prediction.

04.
bioRxiv (Bioinfo) 2026-06-11

DeePEn - A Depth sensitive benchmark for Protein Engineering

Recent progress in modeling techniques and high-throughput screening has significantly enhanced the accessibility of protein engineering. Nevertheless, further progress gets hindered by the lack of robust benchmarks that capture the practical challenges for real-world protein engineering. Here, we introduced DeePEn, a Depth-sensitive benchmark for Protein Engineering that quantifies a models generalization capabilities when predicting protein fitness at increasing mutational distance from the wildtype or training data. We defined distance as the number of simultaneous point mutations, i.e., single amino acid variants (SAVs), moving from wild-type to mutant (edit distance in computer science jargon). Specifically selecting four deep mutational scanning (DMS) datasets with sufficient multi-mutation data points from ProteinGym, we assessed recent predictive models, including general and biophysics-informed protein Language Models (pLMs), and a non-transformer neural network. Our results highlight how the performance of all models deteriorates with increasing mutational distance and that no single metric sufficiently captures the diverse requirements of protein engineering. To overcome these shortcomings, DeePEn provides a readily available resource for multi-metric benchmarking that focuses on the prediction of distant variants.

05.
arXiv (CS.CV) 2026-06-16

CheXGenBench: A Unified Benchmark For Fidelity, Privacy and Utility of Synthetic Chest Radiographs

Structured benchmarks have advanced text-conditional image generation for real-world imagery, however, no such benchmark exists for synthetic radiograph generation. Despite being a highly active area of research, existing studies continue adopting inconsistent evaluation protocols and lack a unified assessment of the three most critical criteria: generative fidelity, privacy risk, and downstream utility. To address these limitations, we introduce CheXGenBench, the first unified evaluation framework for synthetic chest radiograph generation that simultaneously assesses fidelity, privacy risks, and downstream utility across frontier text-to-image (T2I) generative models. Our evaluation protocol, comprising over 20 quantitative metrics, covers 11 leading T2I architectures with plug-and-play integration for newer models. Through a rigorous and fair evaluation protocol, we establish comprehensive baseline state-of-the-art (SoTA) performances across all dimensions to guide future research. Furthermore, our results uncover several limitations of current generative models, which include first, even SoTA models struggle with long-tailed medical distributions; second, models pose high privacy risks regardless of fidelity quality; and third, while synthetic data already benefits downstream classification, it is of limited utility for downstream multimodal tasks. Drawing from these results, we propose concrete research directions to advance the field. The code is available at https://github.com/Raman1121/CheXGenBench

06.
arXiv (CS.LG) 2026-06-11

Online Shift Detection and Conformal Adaptation for Deployed Safety Classifiers

arXiv:2606.11949v1 Announce Type: new Abstract: We present an online monitoring system for distributional shift in deployed safety classifiers, using calibrated sequential statistics to detect when a classifier has moved out of distribution. Upon detection, a conformal abstention layer adapts decision thresholds to recover a target error rate epsilon=0.1. In a pre-registered factorial evaluation (4 classifiers x 5 shift conditions x 20 seeds x 2 window sizes, 800 cells), the system achieves 86.6% valid detection (693/800, 95% CI [84.1%, 88.8%]) with mean latency of 39.5 steps. Detection holds across three ground-truth regimes: synthetic onset (86.6%), real temporal jailbreaks (85%, 17/20), and GCG adversarial attacks. Weighted conformal prediction recovers up to 39 pp of lost coverage for DeBERTa (ESS=46/300) but collapses for all other classifiers (ESS~300): logistic density ratio estimation achieves perfect source/target separability in high-dimensional embedding spaces, clipping all importance weights to the floor. DeBERTa shows a gradient from effective correction (paraphrase, ESS=46) to near-total collapse (adversarial suffix, ESS=206). PCA to 32 dimensions breaks the collapse, recovering 33 pp for Llama Guard and 21 pp for ShieldGemma. Variance decomposition reveals classifier (eta^2=0.243), shift type (eta^2=0.237), and their interaction (eta^2=0.185) all contribute substantially to detection latency variance (all p

07.
arXiv (CS.CL) 2026-06-11

LifeSentence: Language models can encode human life course trajectories from longitudinal panel data

Forecasting human life outcomes is important to gain insights into how individuals attain long and healthy lives. Conventional statistical approaches yield limited accuracy, potentially due to discarding the sequential structure of the life course. Modern methods such as transformer architectures require large scale training data that most longitudinal panel studies lack. Here we introduce LifeSentence, a model for life-course reasoning that bridges large language models with longitudinal panel data. By representing each life event as a structured natural-language record and instruction-tuning a pretrained 24-billion-parameter language model across an 18-task evaluation taxonomy spanning prediction, robustness and reasoning, LifeSentence supplements panel data with distributional knowledge already encoded during pretraining. Trained on approximately 65,000 individuals from the German Socio-Economic Panel - roughly 45 times fewer than prior transformer-based approaches - LifeSentence outperforms classical and deep learning baselines across all task families, achieving a threefold improvement in joint event-and-timing prediction from best baselines and 91.2% Kendall's tau when reconstructing chronological order from timestamp-stripped event sets. Without explicit supervision, the model recovers documented patterns of social stratification, including the education premium, the gender wage gap and the motherhood penalty, from discrete event sequences alone. A natural-language interface further enables qualitatively new research queries, such as connecting an early-life history to a specified late-life endpoint, establishing LifeSentence as both a predictive tool and a probe for counterfactual exploration of human biographies.

08.
arXiv (CS.LG) 2026-06-16

Empirical Study of Pop and Jazz Mix Ratios for Genre-Adaptive Chord Generation

作者:

arXiv:2605.04998v2 Announce Type: replace-cross Abstract: This revision updates a pop-to-jazz chord-generation rehearsal study. Best-epoch metrics still show that modest pop rehearsal preserves pop accuracy while improving jazz prediction, but v2 corrects released-checkpoint selection: the released F1 equals Phase 0, F2 had a transcription error, and ft-pop80-v2 restores a hash-distinct jazz-adapted F1 across 3 seeds.

09.
arXiv (CS.CV) 2026-06-17

OpenTie: Open-vocabulary Sequential Rebar Tying System

Robotic practices on the construction site emerge as an attention-attracting manner owing to their capability of tackling complex challenges, especially in the rebar-involved scenarios. Most of existing products and research are mainly focused on the collection of large amounts of data with model training demands. To fulfill this gap, we propose OpenTie, a 3D training-free rebar tying framework utilizing a RGB-to-point-cloud generation and an open-vocabulary rebar detection on the real-world test. We implement the OpenTie via a robotic arm with a binocular camera and guarantee a high accuracy by applying the prompt-based object detection method on the image filtered by our proposed post-processing procedure for the image-to-point-cloud generation framework. Our pipeline requires no training efforts and outperforms the training-based object detection, i.e., YOLO-based method, with the verification on the real-world sequential rebar tying test. The system is flexible for horizontal and vertical rebar tying tasks and holds the potential application to the real construction site with possibility of commercialization.

10.
bioRxiv (Bioinfo) 2026-06-18

Deciphering shared and divergent tissue architectures from cross-species spatial transcriptomics

作者:

The integration of spatial transcriptomics (ST) data across species is essential for cross-species and translational studies, but remains challenging due to molecular divergence and anatomical differences between organisms. We present STACAME, a graph attention autoencoder-based framework to decipher shared and divergent tissue architectures from cross-species ST data by explicitly modeling both orthologous and species-specific genes. STACAME aligns ST slices in a spatially aware manner, identifies homologous and species-specific domains, and enables a suite of downstream comparative analyses. We demonstrate its utility by integrating ST datasets from diverse tissues, including hippocampus, isocortex, embryo, breast, liver, and cerebellum, across multiple species such as human, macaque, marmoset, mouse, and zebrafish. STACAME supports cross-species spatial domain alignment, the detection of shared and divergent spatially variable genes, development alignment and comparison, and the 3D integration of tissue architecture. This flexible approach facilitates the translation of findings from model organisms to humans, providing a unified computational platform for cross-species spatial transcriptomics.

11.
arXiv (CS.AI) 2026-06-12

Equivariant Flow Matching for Symmetry-Breaking Bifurcation Problems

arXiv:2509.03340v4 Announce Type: replace-cross Abstract: Bifurcation phenomena in nonlinear dynamical systems often lead to multiple coexisting stable solutions, particularly in the presence of symmetry breaking. Deterministic machine learning models are unable to capture this multiplicity, averaging over solutions and failing to represent lower-symmetry outcomes. In this work, we formalize the use of generative AI, specifically flow matching, as a principled way to model the full probability distribution over bifurcation outcomes. Our approach builds on existing techniques by combining flow matching with equivariant architectures and an optimal-transport-based coupling mechanism. We generalize equivariant flow matching to a symmetric coupling strategy that aligns predicted and target outputs under group actions, allowing accurate learning in equivariant settings. We validate our approach on a range of systems, from simple conceptual systems to physical problems such as buckling beams and the Allen–Cahn equation. The results demonstrate that the approach accurately captures multimodal distributions and symmetry-breaking bifurcations. Moreover, our results demonstrate that flow matching significantly outperforms non-probabilistic and variational methods. This offers a principled and scalable solution for modeling multistability in high-dimensional systems.

12.
arXiv (CS.CL) 2026-06-19

SIGMA: Search-Augmented On-Demand Knowledge Integration for Agentic Mathematical Reasoning

Solving mathematical reasoning problems requires not only accurate access to relevant knowledge but also careful, multi-step thinking. However, current retrieval-augmented models often rely on a single perspective, follow inflexible search strategies, and struggle to effectively combine information from multiple sources. We introduce SIGMA (Search-Augmented On-Demand Knowledge Integration for AGentic Mathematical reAsoning), a unified framework that orchestrates specialized agents to independently reason, perform targeted searches, and synthesize findings through a moderator mechanism. Each agent generates hypothetical passages to optimize retrieval for its analytic perspective, ensuring knowledge integration is both context-sensitive and computation-efficient. When evaluated on challenging benchmarks such as MATH500, AIME, and PhD-level science QA GPQA, SIGMA consistently outperforms both open- and closed-source systems, achieving an absolute performance improvement of 7.4%. Our results demonstrate that multi-agent, on-demand knowledge integration significantly enhances both reasoning accuracy and efficiency, offering a scalable approach for complex, knowledge-intensive problem-solving. We will release the code upon publication.

13.
arXiv (CS.CV) 2026-06-15

Rendering-Aware Sparse Sampling for BRDF Acquisition

Accurate BRDF acquisition is essential for realistic rendering, but dense gonioreflectometer measurements are slow and expensive. We study how to select a small set of BRDF measurements that is most informative for reconstructing material appearance under a learned BRDF prior. Existing sparse-acquisition methods often optimize samples for BRDF-space reconstruction for all materials, while the perceptual importance of a adaptive measurement ultimately depends on its effect on each rendered appearance. We therefore formulate sparse adaptive acquisition as a rendering-aware optimization problem. Our method combines a set encoder for sparse coordinate–value observations, a pretrained hypernetwork-based/PCA-based BRDF reconstructor, and a differentiable renderer. During sampler training, the reconstructor remains fixed, and gradients from a rendered-image loss optimize the measurement locations. This separates acquisition design from prior fitting and encourages the sampler to choose directions that are informative under the learned material distribution. To make the comparison controlled, we evaluate the uniform baseline, meta-learning method, HyperBRDF method, and our learned sampler under matched sample numbers, train/test split, rendering scene, object mask, image mapping, and metrics. Our central claim: rendering-aware sampling improves extremely sparse BRDF acquisition when final rendered appearance is the target. BRDF-space and combined losses are reported only as ablations, together with joint refinement and image-only latent fitting for unseen materials.

14.
arXiv (CS.AI) 2026-06-15

An Analysis of the Coordination Gap between Joint and Modular Learning for Job Shop Scheduling with Transportation Resources

arXiv:2604.24117v2 Announce Type: replace Abstract: Efficient job-shop scheduling with transportation resources is critical for high-performance manufacturing. With the rise of "decentralized factories", multi-agent reinforcement learning has emerged as a promising approach for the combined scheduling of production and transportation tasks. Prior work has largely focused on developing novel cooperative architectures while overlooking the question of when joint training is necessary. Joint training denotes the simultaneous training of job and automatic guided vehicle scheduling agents, whereas modular training involves independently training each agent followed by post-hoc integration. In this study, we systematically investigate the conditions under which joint training is essential for optimal performance in the job-shop scheduling problem with transportation resources. Through a rigorous sensitivity analysis of resource scarcity and temporal dominance, we quantify the coordination gap – the performance difference between these two training modalities. In our evaluation, joint training outperforms the majority of dispatching rule combinations and modular training approaches. However, the coordination gap advantage diminishes in bottleneck environments, particularly under severe transport and processing constraints. These findings indicate that modular training represents a viable alternative in environments where a single scheduling task dominates. Overall, our work provides practical guidance for selecting between training modalities based on environmental conditions, enabling decision-makers to optimize reinforcement learning-based scheduling performance.

15.
arXiv (CS.LG) 2026-06-16

The Algebra of Units: From Buckingham's Pi-grec Theorem to Latent-Variable Learning

arXiv:2606.16737v1 Announce Type: cross Abstract: Engineers often measure many quantities-speed, pressure, temperature, length-expressed in different physical units. The Buckingham Pi-grec theorem states that these variables can always be combined into a smaller set of dimensionless numbers whose values fully determine the system's behaviour. Identifying the appropriate dimensionless groups has traditionally required expert knowledge and physical insight. This paper shows that they can instead be discovered automatically from data, without prior knowledge of the governing physics. The key observation is that, after logarithmic transformation, measurements collected under different scalings of the same system lie on a low-dimensional manifold whose geometry is determined by the underlying dimensionless groups. Singular value decomposition (SVD) identifies this manifold directly from data. A subsequent search over integer-exponent combinations recovers candidate dimensionless quantities, while a repeating-variable filter retains only those constructed from the machine's characteristic scales. This procedure recovers familiar engineering groups, including the flow coefficient, head coefficient, and Mach number, while excluding equivalent but less interpretable alternatives. The method is demonstrated on a synthetic compressor dataset containing 16,000 measurements. Starting from raw dimensional variables and no physics input, it recovers the correct dimensionless groups to numerical precision and reproduces the compressor performance map with an error below 0.01%. More broadly, the work reveals a close connection between classical dimensional analysis and modern data-driven learning. Both rely on the same underlying algebraic structure, suggesting new approaches for building physical models that are simultaneously interpretable, scalable, and data-efficient.

16.
arXiv (CS.CV) 2026-06-15

A Qualitative Review of GenAI-Based Methods for Data Generation and Augmentation in Industrial Computer Vision Applications

AI-driven computer vision applications require a profound database to ensure predictable behaviors and performance. Such predictable behaviors are especially important for industrial applications in gaining trust from users. However, such a database is not readily available in industrial applications, and its acquisition is not trivial either. Active learning methods can be applied to ramp up data within a project deployment to iteratively increase the database, and thus the application predictability. Unfortunately, we observe that this often leads to a loss of user trust in the application, which is difficult to regain once lost. This leads to a "chicken-and-egg" dilemma in which neither the database nor the application is developed. In this work, we review state-of-the-art methods and approaches to further boost the database the initial active data ramp-up phase. Here, we focus on recent advancements in GenAI-based data generation and augmentation methods and review their adaptability on an industrial computer vision classification use case. Although we observe a potential for automatic data ramp-up, we also see a domain miss match in between the source (training environment) and target (industrial use-case) - regarding context defined in natural language and object characteristics.

17.
arXiv (CS.CV) 2026-06-16

MeshFlow: Efficient Artistic Mesh Generation via MeshVAE and Flow-based Diffusion Transformer

We present MeshFlow, a new method for generating artist-like 3D meshes. Current mesh generators often adopt Auto-Regressive (AR) next-token prediction, a natural choice given the discrete nature of mesh topology. However, AR methods scale poorly because the inference cost is quadratic in mesh size. They also require discretizing the vertex coordinates, which introduces quantization errors. To address these challenges, we introduce a Variational Autoencoder (VAE) that, supervised with a contrastive loss, represents both continuous vertex positions and discrete connectivity in a continuous latent space. This latent space is significantly more compact than prior token-based mesh representations. We then build a 3D generator based on a Rectified Flow transformer, generating all mesh vertices and edges in parallel. Our model generates meshes 18x faster than the fastest AR generator while also achieving excellent accuracy across standard mesh-generation metrics. Homepage: https://mesh-flow.github.io/, Code: https://github.com/facebookresearch/meshflow

18.
arXiv (CS.CL) 2026-06-11

An Ontology-Guided Multi-Anchor Graph Retrieval Framework for Traffic Legal Liability Determination

Traffic law liability determination is critical for assigning legal penalties, requiring the simultaneous identification of interdependent statutory provisions across multiple legal dimensions. However, existing retrieval-augmented generation methods suffer from a multi-dimensional retrieval bottleneck: single axis architectures compress complex legal queries into a single pathway, causing interdependent statutory dimensions to be overlooked. To address this, we propose OMAGR, an ontology-guided framework that decomposes queries into ontology-aligned anchors and executes parallel graph retrieval across each dimension, ensuring independent retrieval across dimensions before fusion. To evaluate the proposed method, we created the TrafficLaw-QA dataset, an expert-validated benchmark dataset containing 200 questions and 527 legal provisions. Results show that TrafficOmni-RAG outperforms baselines on Context Precision and Faithfulness metrics. The findings demonstrate that parallel multi-anchor retrieval effectively resolves the multi-dimensional retrieval bottleneck, offering a promising direction for traffic law liability determination research.

19.
medRxiv (Medicine) 2026-06-17

Multi-strain Probiotics Alter Gut Microbiota and Estrobolome Pathways in Primary Dysmenorrhea

Background: Exact cause of primary dysmenorrhoea is unknown but recent evidence uncovers a potential link between gut dysbiosis and benign gynaecological disorder via disruption of estrobolome. Methods: A randomized controlled trial to investigate the effects of multi-strain oral probiotics on primary dysmenorrhoea has been conducted. This is a secondary analysis comparing the stool microbiome in women with primary dysmenorrhoea and those without (control), and the effects of treatment with probiotics versus placebo. Results: Although microbial richness and evenness were comparable between groups (alpha diversity, p > 0.05), gut microbial community composition differed significantly (Bray Curtis PERMANOVA, p = 0.015), characterised by reduced Bifidobacterium adolescentis and Blautia and enrichment of Faecalibacterium in dysmenorrhoea, alongside condition-specific core taxa. Post-intervention analysis revealed significant shifts in microbial community structure between pre- and post-treatment groups (PERMANOVA, F = 2.11, p = 0.005), with probiotic supplementation inducing more consistent and directed microbiome changes than placebo, without altering alpha diversity (p > 0.05). Functional prediction showed no significant difference in overall beta glucuronidase pathway abundance (p > 0.05); however, dysmenorrhoea was associated with higher abundance of beta glucuronidase producing taxa (MaAsLin2, q < 0.05) that were differentially modulated by probiotic treatment. Conclusion: This discovery provides evidence on the microbial disruption in primary dysmenorrhoea as well as the benefit of probiotics to modulate the intestinal microbiota to improve the condition.

20.
bioRxiv (Bioinfo) 2026-06-18

Identification of environmental factors and growth stages in the prediction of fibre yield and fibre quality traits in rain-grown cotton

Context Understanding how and when environmental conditions influence overall crop performance is crucial for optimising the development of genotypes to a specific breeding target environment. We focused on economically important traits of Australian rain-grown cotton including fibre yield and quality traits, which have not been investigated comprehensively. The aim of the study was to identify relevant environmental factors, and the timing and extent of their impact on rain-grown cotton production. Methods We used a data driven approach to analyse the relationship between ten climate related environmental factors across various plant growth stages and eight fibre yield and quality traits, using a large-scale field dataset of 9,283 records collected over 23 years at 4 locations, with 53 unique year-location combinations. We applied eight complementary statistical models including stepwise, penalised and Bayesian linear regression, regression-tree based ensemble methods and deep learning frameworks to (1) select the most essential environmental covariates affecting rain-grown cotton production, and (2) evaluate the predictive performance of these models. Results The environmental impacts on rain-grown cotton production were trait and growth-stage specific. Number of rainy days and solar radiation were identified as the most influential environmental factors for fibre yield traits, vapour pressure deficit at maximum daily temperature was the most influential factor for majority of fibre quality traits. However, each analysed trait was influenced by multiple environmental factors across multiple growth stages (rather than a single factor or a single growth stage). These influential covariates explained a wide range of variation in the traits, accounting for 5.8% to 68.2%. Using the best-fit random forest model, our findings revealed non-linear relationships between key environmental covariates and the traits. Conclusions Environmental factors at different rain-grown cotton growth stages are key determinants for the performance of end-of-season fibre yield and fibre quality parameters. These findings highlight the need to account for environment conditions when developing cotton varieties optimised for rain-grown production systems. Potential strategies are proposed whereby these key environmental factors can be used to increase the rate of genetic gain in rain-grown cotton production systems. Implications The results of this study will be crucial for future genetic evaluations and analyses of genotype-by-environment interaction effects in rain-grown cotton, which must account for the influence of the environment on plant performance. Furthermore, these methods can be applied to other species to identify critical growth stages and environmental factors which most influence crop performance.

21.
arXiv (CS.CV) 2026-06-17

Beyond MACs: Hardware Efficient Architecture Design for Vision Backbones

Vision backbone networks play a central role in modern computer vision. Enhancing their efficiency directly benefits a wide range of downstream applications. To measure efficiency, many publications rely on MACs (Multiply Accumulate operations) as a predictor of execution time. In this paper, we experimentally demonstrate the shortcomings of such a metric, especially in the context of edge devices. By contrasting the MAC count and execution time of common architectural design elements, we identify key factors for efficient execution and provide insights to optimize backbone design. Based on these insights, we present LowFormer, a novel vision backbone family. LowFormer features a streamlined macro and micro design that includes Lowtention, a lightweight alternative to Multi-Head Self-Attention. Lowtention not only proves more efficient, but also enables superior results on ImageNet. Additionally, we present an edge GPU version of LowFormer, that can further improve upon its baseline's speed on edge GPU and desktop GPU. We demonstrate LowFormer's wide applicability by evaluating it on smaller image classification datasets, as well as adapting it to several downstream tasks, such as object detection, semantic segmentation, image retrieval, and visual object tracking. LowFormer models consistently achieve remarkable speed-ups across various hardware platforms compared to recent state-of-the-art backbones. Code and models are available at https://github.com/altair199797/LowFormer/blob/main/Beyond_MACs.md.

22.
arXiv (CS.CV) 2026-06-12

CD-RCM: Generalizable Continuous-Depth Novel View Synthesis for Reflectance Confocal Microscopy

Reflectance confocal microscopy (RCM) provides noninvasive, cellular-resolution "optical biopsies" of human skin in vivo by acquiring en-face images at successive depths, forming a sparse z-stack. Due to optical limitations, these stacks are anisotropic 3D volumes with lateral resolution (0.5 $\mu$m) $\sim$6 times higher compared to axial resolution, which is defined by the optical sectioning (3 $\mu$m), limiting the interpretation of tissue. Our goal is to provide continuous-depth visualization by interpolating intermediate sections and making the 3D volume isotropic. Such a representation permits arbitrary-direction sectioning, including histopathology-like cross-sectional examination, without requiring per-patient optimization. To that end, we introduce the first RCM-specific novel-view synthesis (NVS) approach, CD-RCM, a feedforward model that predicts realistic, unseen depths from sparsely sampled RCM stacks. Classical neural rendering methods focus on reconstruction from surface-level multi-view observations. In contrast to surface-level camera views, RCM can acquire optically sectioned en-face images of tissue beyond the surface up to 200 $\mu$m. However, during visualization of the RCM stacks, observations of the shallower sections (towards the surface) obscure the deeper ones. This unique axial imaging geometry and layer-dependent anatomical organization motivated our development of a tailored architectural and training framework that explicitly accounts for RCM's depth-resolved, occlusive imaging physics. Experiments demonstrate that CD-RCM achieves high-fidelity novel-view synthesis with sub-second inference time.

23.
arXiv (CS.AI) 2026-06-12

Echo2ECG: Enhancing ECG Representations with Cardiac Morphology from Multi-View Echos

arXiv:2603.08505v2 Announce Type: replace-cross Abstract: Electrocardiography (ECG) is a low-cost, widely used modality for diagnosing electrical abnormalities like atrial fibrillation by capturing the heart's electrical activity. However, it cannot directly measure cardiac morphological phenotypes, such as left ventricular ejection fraction (LVEF), which typically require echocardiography (Echo). Predicting these phenotypes from ECG would enable early, accessible health screening. Existing self-supervised methods suffer from a representational mismatch by aligning ECGs to single-view Echos, which only capture local, spatially restricted anatomical snapshots. To address this, we propose Echo2ECG, a multimodal self-supervised learning framework that enriches ECG representations with the heart's morphological structure captured in multi-view Echos. We evaluate Echo2ECG as an ECG feature extractor on two clinically relevant tasks that fundamentally require morphological information: (1) classification of structural cardiac phenotypes across three datasets, and (2) retrieval of Echo studies with similar morphological characteristics using ECG queries. Our extracted ECG representations consistently outperform those of state-of-the-art unimodal and multimodal baselines across both tasks, despite being 18x smaller than the largest baseline. These results demonstrate that Echo2ECG is a robust, powerful ECG feature extractor. Our code is accessible at https://github.com/michelleespranita/Echo2ECG.

24.
arXiv (CS.LG) 2026-06-11

Density estimation for Hellinger via minimum-distance estimators: mixtures of Gaussians, log-concave, and more

arXiv:2606.11469v1 Announce Type: cross Abstract: We study the task of density estimation, where we hope to accurately estimate a probability density from $n$ samples. A textbook method for density estimation in total variation distance is the minimum-distance estimator approach, where we conclude both the algorithm and the analysis merely from bounding the VC dimension of a particular concept class (the so-called Yatracos class). While this technique has originally yielded sharp guarantees primarily for total variation distance, in this work we extend the minimum-distance estimator approach for learning within Hellinger distance. Our main observation is that we may produce an analogous recipe for Hellinger (where we only require bounding the VC dimension of a related concept class) by drawing connections to recent results yielding reverse data processing inequalities. This recipe is flexible enough to accommodate fast algorithms originally designed for total variation distance; by modifying the approach of Acharya et al. (2017) we conclude the first near-linear time algorithm for learning classes including univariate mixtures of log-concave densities and mixtures of Gaussians (with arbitrary variances), with near-optimal sample complexity.

25.
arXiv (quant-ph) 2026-06-16

The Quantum Transition State

arXiv:2606.10266v2 Announce Type: replace Abstract: The transition state – the critical configuration separating reactants from products – is the central organizing concept of chemical reaction rate theory, yet for nearly a century it has been thought to have no exact quantum counterpart: the recrossing-free, one-way flux through a transition state appears to demand simultaneous knowledge of position and momentum, in conflict with the uncertainty principle. We show this obstruction is illusory and construct the quantum transition state directly from the exact quantum flow. Its stable and unstable invariant manifolds intersect in a unique bounded trajectory – the quantum transition-state trajectory – anchoring a moving dividing surface that each reactive characteristic crosses exactly once, yielding a one-way flux of the standard quantum probability current. The geometric framework underlying classical transition-state theory thus survives intact in exact quantum mechanics, in a fundamentally quantum form.