Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-18

Towards a future space-based, highly scalable AI infrastructure system design

arXiv:2511.19468v2 Announce Type: replace-cross Abstract: If AI is a foundational general-purpose technology, we should anticipate that demand for AI compute – and energy – will continue to grow. The Sun is by far the largest energy source in our solar system, and thus it warrants consideration how future AI infrastructure could most efficiently tap into that power. This work explores a scalable compute system for machine learning in space, using fleets of satellites equipped with solar arrays, inter-satellite links using free-space optics, and Google tensor processing unit (TPU) accelerator chips. To facilitate high-bandwidth, low-latency inter-satellite communication, the satellites would be flown in close proximity. We illustrate the basic approach to formation flight via an 81-satellite cluster of 1 km radius, and describe an approach for using high-precision ML-based models to control large-scale constellations. Trillium TPUs are radiation tested. They survive a total ionizing dose equivalent to a 5 year mission life without permanent failures, and are characterized for bit-flip errors. Launch costs are a critical part of overall system cost; a learning curve analysis suggests launch to low-Earth orbit (LEO) may reach $\lesssim$\$200/kg by the mid-2030s.

02.
arXiv (quant-ph) 2026-06-12

Quantum walk-based optimisation for capacitated vehicle routing with homogeneous and heterogeneous fleets

arXiv:2606.12856v1 Announce Type: new Abstract: The capacitated vehicle routing problem (CVRP) is an appealing candidate for quantum optimisation due to its combinatorial complexity and practical importance. However, the problem's constrained search space poses a challenge for such quantum algorithms. We introduce a quantum walk-based optimisation algorithm (QWOA) for the CVRP with homogeneous or heterogeneous vehicle fleets, addressing this challenge through a continuous-time quantum walk over a product space that coincides with combinatorial structures intrinsic to the CVRP solution space. Relative to the prior QWOA-based formulation, this approach reduces the per-layer gate complexity from $\mathcal{O}(n^{3}\log n)$ to $\mathcal{O}(n^{2}\log n)$ and supports a circuit parameterisation schedule generated by a fixed number of classical parameters. Exact state-vector simulation on instances with up to $n=8$ customers and $K=3$ vehicles demonstrates improved convergence to low-cost solutions using markedly fewer objective function evaluations, with the advantage broadening as problem size increases. These results identify structured product-space walks as a promising tool for optimisation over constrained combinatorial spaces.

03.
arXiv (quant-ph) 2026-06-15

Interpreting Bohm-like quantum potentials in "Computing quantum waves exactly from classical action"

arXiv:2605.20443v3 Announce Type: replace Abstract: The recent posting arXiv:2605.02621 [14], commenting on the article rspa.2025.0413 [7], argues that the proof of Lemma 3.1 in [7] is missing the spatial derivative of the density, which would lead to a Bohm-like quantum potential. This technical note shows why the propagated density is independent of space in the Feynman propagator construction of Lemma 3.1. This is done by extending the proof of Lemma 3.1 explicitly with Bohm-like quantum potential terms along the stationary action paths, and then showing that these terms are exactly zero. In [7], this property can also be verified directly on most examples (double slit, Aharonov-Bohm, potential well, harmonic oscillator, tunneling, EPR, QED), as well as in the derivations of the Pauli, Dirac, and Maxwell equations. For more general nonlinear actions, a time rescaling may be required to guarantee this space independence along stationary paths. In the hydrogen atom example, this time rescaling can be computed in closed form. In contrast to the general wave of the Madelung solution [9] Lemma 3.1 of [7] is defined first for a propagator, and a general wave is then constructed in a second step. Recall that a propagator is a specific quantum wave, which is initialized at $t=0$ with a Dirac impulse at a given initial position or momentum. In turn, a general wave is constructed in a second step by superposing a distribution of initial conditions using the propagator. This key difference is why the Bohm-like quantum potential terms disappear in the construction [7] (specifically, in the first step) while the Bohm potential in the Madelung analysis does not. This fundamental difference is also consistent with the fact that the wave construction in [7] extends naturally to relativistic contexts, while Bohmian non-locality notoriously prevents such extensions. Keywords - Response to arXiv:2605.02621, in relation to rspa.2025.0413

04.
arXiv (CS.AI) 2026-06-17

Physics-Informed Attention Mechanism and Generalization Capability of Deep Learning-Based Grain Growth Evolution Prediction

arXiv:2606.17235v1 Announce Type: cross Abstract: Machine Learning (ML) models for grain growth prediction are typically trained on idealized synthetic data, yet practical applications require generalization to conditions outside the training distribution. This study evaluated the Out-Of-Distribution (OOD) generalization capability of the trained model from our previous study across three test cases, including experimental microstructures, microstructures characterized by a bimodal grain size distribution, and abnormal grain growth. To further probe whether physics-informed architectural design could improve robustness under these different conditions, a boundary-masked attention mechanism was proposed specifically for grain growth, constraining attention to grain boundary pixels. Both the baseline and the proposed physics-informed attention model were evaluated without retraining or fine-tuning on the OOD data. Both models successfully generalized to all three test cases, yet the boundary-masked attention mechanism provided substantial improvements, with the most notable gains for microstructures characterized by a bimodal grain size distribution, where Structural Similarity Index Measure (SSIM) improved from \num{0.6221} to \num{0.7609} and mean grain size ($\overline{R}$) error decreased from \operatorname{SI}{8.75}{\percent} to \operatorname{SI}{3.57}{\percent}. The attention heatmap analysis revealed that the boundary-masked attention model learned to concentrate attention on large grain boundaries in a manner consistent with curvature-driven grain growth physics, emerging from training without being explicitly encoded into the architecture. These results indicate that models trained on synthetic data can generalize to diverse OOD conditions without retraining, and that physics-informed attention may improve accuracy when the boundary morphology matches the training domain.

05.
arXiv (CS.AI) 2026-06-18

From Specification to Execution: AI Assisted Scientific Workflow Management

arXiv:2606.18425v1 Announce Type: cross Abstract: Scientific workflow management systems (WMS) support scalable and reproducible execution of complex pipelines, but workflow design, implementation, and debugging remain largely manual and require significant expertise. Recent approaches using large language models (LLMs) show promise for workflow generation from natural language, but often rely on direct code synthesis, which limits transparency, reproducibility, and integration with workflow systems. We present an AI-assisted approach to scientific workflow management that combines specification-driven workflow generation, automated debugging, and distributed execution. The method introduces a structured specification phase that separates workflow intent, design, and implementation, allowing validation prior to code generation. We also develop an LLM-based debugging agent that diagnoses and resolves failures across multiple system layers. To support distributed execution and user interaction, we integrate Pegasus, a widely used WMS, with a Model Context Protocol (MCP) layer, providing a unified interface for workflow submission, monitoring, and control. We evaluate the approach using a federated learning workflow for medical imaging, chosen for its parallel, iterative, and dependency-intensive structure. The system generated and executed large-scale workflows with thousands of jobs, reduced debugging effort, and allowed non-expert users to construct workflows with expert-level design patterns. These results indicate that end-to-end AI-assisted workflow generation and execution is feasible, and point toward AI-driven platforms for managing the scientific workflow lifecycle.

06.
medRxiv (Medicine) 2026-06-15

Entity-Aware Generation of Synthetic Clinical Progress Notes for Prostate Cancer using Large Language Model

Objectives: This study investigates large language models (LLMs) for clinical entity projection across substantial textual transformation. Specifically, we evaluate whether entities annotated in Spanish prostate cancer case reports can be preserved and explicitly projected when the source narratives are transformed into hospital-style clinical progress notes. Entity projection is treated as a generation-driven task, allowing paraphrase, condensation and narrative reorganisation, providing that clinically relevant entities remain recoverable as structured annotations. Methods: A corpus of 109 Spanish prostate cancer case reports was annotated using a silver-standard pipeline combining Spanish biomedical named-entity recognition with rule-based prostate-specific antigen (PSA) and Gleason extractors. The resulting silver-standard annotations were validated on a subset of generated notes against a gold-standard consensus produced by medical experts in prostate cancer. Four LLMs were evaluated for note generation and entity projection: GPT-5.4 Nano, Qwen 3.5:35B-A3B, GLM5 and Claude Sonnet 4.6. Entity-to-Entity (E2E) generation used XML-annotated cases as RAG-supported input, whereas Text-to-Entity (T2E) generation required models to generate and annotate notes directly from plain text cases. Zero-shot and few-shot prompting were tested. Projection quality was measured using precision, recall and F1-score, and complemented by LLM-as-a-judge evaluation using Kimi K2.6. Results: E2E consistently outperformed T2E, indicating that explicit entity-enriched in- put substantially facilitates entity preservation and localisation. GLM5 achieved the best E2E zero-shot result (F1 = 0.915), followed by Claude Sonnet 4.6 (F1 = 0.896). In T2E, few-shot prompting improved performance, with Claude Sonnet 4.6 reaching the highest score (F1 =0.718). Age, Gleason, Disease, Procedure, Duration and negation-related entities were robustly projected, whereas PSA and Dose showed less stable behaviour. Conclusion: LLMs can generate clinically plausible synthetic prostate cancer evolution notes while preserving a substantial proportion of source entities, particularly when explicit semantic annotations are provided as input. However, the lower and more variable performance observed in T2E highlights the difficulty of jointly generating clinical narratives and projecting entities without source-side information, especially for numerical and measure-related entities.

07.
arXiv (CS.CV) 2026-06-16

Towards UAV Image Dehazing: A UAV Atmospheric Scattering Model, Benchmark, and Geometry-Aware Deep Unfolding Network

In UAV applications, haze significantly obscures distant details and weaken structural information, hindering the recovery of details. Current UAV scenarios still face two key challenges: (i) paired hazy/clean images from the real world are unobtainable, while the classical atmospheric scattering model is inadequate for modeling the spatially non-uniform haze in UAV imagery; (ii) existing dehazing methods struggle to remove the heavy haze accumulated in the upper regions of UAV images. To address these issues, we first propose a UAV Atmospheric Scattering Model (UASM), which explicitly incorporates flight altitude, viewing pitch, and extinction to characterize the non-uniform haze distribution in UAV imaging. Based on UASM, we develop a physics-driven dehazing framework, termed Geometry-aware Proximal Deep Unfolding Network (GP-DUN). Specifically, GP-DUN consists of three key modules: a Latent Geometry Estimator (LGE) that infers transmittance consistent with UAV imaging geometry, a Geometry-aware Gradient Descent Module (GeoGDM) that embeds UASM into the data-fidelity term and performs physics-consistent closed-form updates, and an Pooling-Expert Proximal Mapping Module (PE-PMM) that learns an implicit prior to restore textures and structures beyond the capability of explicit physical modeling. In addition, we further construct UASM-HazeSet, which provides controllable paired synthetic data together with 2,285 real UAV haze images for testing. Extensive experiments show that GP-DUN consistently outperforms existing methods on both UASM-HazeSet and real UAV haze benchmarks.

08.
arXiv (CS.AI) 2026-06-19

Exit-and-Join Dynamics for Decentralized Coalition Formation

作者:

arXiv:2606.19683v1 Announce Type: new Abstract: This paper studies coalition formation as a decentralized dynamical process driven by unilateral exit-and-join decisions. Agents evaluate local moves using the Aumann-Dreze value, so payoffs are computed within the agent's current coalition rather than through a globally negotiated coalition structure. The resulting model links cooperative payoff allocation with noncooperative best-response behavior: a terminal partition is precisely a coalition structure with no admissible, individually profitable exit-and-join deviation. We establish equilibrium characterizations, identify conditions under which the dynamics admit scalar Lyapunov or exact-potential representations, and analyze how switching and acceptance costs shape local stability. Numerical experiments test finite-time stabilization, cost sensitivity, and a special convex-game benchmark.

09.
arXiv (CS.LG) 2026-06-16

PromptShift-CRC: Drift-Aware Conformal Risk Control for Foundation Models Under Prompt and Domain Shift

arXiv:2606.15964v1 Announce Type: cross Abstract: Foundation models are now used in settings where the prompts they receive can change quickly. Users change, topics change, policies change, and the model may suddenly face a kind of request that was rare in the calibration data. This makes fixed calibration risky. Conformal prediction and conformal risk control give model-agnostic ways to control error, but they work best when the calibration data still look like the future data. This paper develops PromptShift CRC, a drift-aware conformal risk control method for foundation-model outputs under prompt and domain shift. The method embeds prompts and responses, measures how far the current prompt stream has moved from the calibration pool, gives more weight to relevant or recent calibration examples, and updates the risk level online after observed violations. It reports three practical diagnostics: realized risk error, prompt drift, and effective calibration size. We give conditions under which the method controls risk up to terms for distribution mismatch and weighted quantile uncertainty. In a synthetic prompt-shift benchmark, static conformal risk control fails sharply after drift, while PromptShift-CRC gives the best coverage among the adaptive baselines considered. We then evaluate the same calibration layer on public benchmark derived streams for question answering, toxicity, summarization factuality, and long-context hallucination risk

10.
arXiv (CS.LG) 2026-06-17

Geometrical fairness in graph neural networks

arXiv:2606.17684v1 Announce Type: cross Abstract: Graph-based learning methods have become increasingly prominent due to their strong performance across diverse applications. Among these, recent frameworks grounded in diffusion processes provide a unifying perspective that extends traditional graph neural network formulations while addressing limitations of standard message-passing mechanisms. Despite these advances, concerns remain regarding the fairness of such models, as they may propagate or amplify biases present in the data. In this work, we introduce a fairness-aware adaptation of graph-based diffusion by modifying the underlying Laplacian operator. Our approach incorporates multiple complementary transformations, including subspace projections, spectral adjustments, and frequency-based filtering, to mitigate bias-related components. Leveraging the intrinsic smoothing properties of graph diffusion, we provide a principled analysis of the resulting behavior and establish theoretical insights into fairness properties. We evaluate the proposed framework on both synthetic and real-world datasets, demonstrating that it achieves competitive performance while improving fairness metrics with limited additional computational cost.

11.
arXiv (CS.CV) 2026-06-24

Heterogeneous Knowledge Distillation via Geometry Decoupling and Momentum-Aware Gradient Regulation

Heterogeneous Knowledge Distillation (HKD) aims to transfer knowledge across varying architectures (e.g., from Transformer to CNN) but inherently suffers from severe training instability. We reveal that this instability stems from two highly coupled challenges: massive feature norm discrepancies that cause optimization drag, and severe gradient conflicts between the primary and distillation objectives arising from distinct inductive biases. To achieve stable distillation, we propose SPOFA, a framework built upon a novel Feature and Gradient Dual Stabilization mechanism. Specifically, at the feature level, we introduce a LayerNorm-based decoupling projector that explicitly decouples feature magnitude from direction, creating a bounded and stable space for semantic alignment. At the gradient level, we propose a momentum-driven Exponential Moving Average (MEMA) dynamic scaler. By establishing a robust historical baseline of the optimization trajectory, MEMA actively evaluates instantaneous gradient conflicts and adaptively penalizes harmful distillation signals, guaranteeing stable convergence. Importantly, SPOFA achieves this dual stabilization with an extremely lightweight parameter footprint. Extensive experiments on two mainstream benchmarks demonstrate that SPOFA achieves state-of-the-art accuracy, significantly outperforming computationally expensive methods while introducing only minimal computational overhead compared to standard baselines.

12.
arXiv (CS.CL) 2026-06-24

Faithful by Construction: Claim-Anchored Attribution for Multi-Document Summarization

作者:

End-to-end large language models (LLMs) produce fluent multi-document summaries but remain prone to hallucination, and the attributions they offer are typically coarse (whole documents or passages) and generated post hoc, leaving each summary statement hard to verify. We revisit the modular Extract–Select–Rewrite paradigm and recast its intermediate representation as the unit of attribution. We present CAMS, a Claim-Anchored Multi-document Summarization framework that (i) extracts atomic claims with token-level provenance from every source document, (ii) clusters equivalent claims across documents while flagging inter-source conflicts, (iii) selects a support-aware and salient subset, and (iv) rewrites the selection into a summary in which every sentence is anchored to a support-checked claim that links back to one or more source spans. Because content is localized before it is realized, the pipeline is attribution-oriented by construction and faithfulness-oriented by construction: it structurally preserves fine-grained, multi-source traceability while using support-aware selection, constrained rewriting, and verification to encourage, rather than guarantee, factual faithfulness. We evaluate quality, faithfulness, and localization on MultiNews, analyze conflict handling on DiverseSumm, and test zero-shot transfer on WCEP, using a two-regime protocol that separates reference-free citation quality from gold-aligned localization accuracy, and we add an evaluator-decoupled audit that tests citation precision with a support model never used for selection or verification. CAMS matches strong end-to-end and span-attribution baselines on summary quality while substantially improving faithfulness and citation precision, lifting multi-source attribution accuracy by roughly two-thirds, and exposing a controllable faithfulness–coverage trade-off that end-to-end models leave implicit.

13.
arXiv (CS.LG) 2026-06-24

Parallel Manifold Steering: Efficient Adaptation of Large Associative Memories via Residual Energy Shaping

arXiv:2606.24396v1 Announce Type: new Abstract: Large Transformer models function as Dense Associative Memories (DAMs), retrieving knowledge via high-dimensional attractor dynamics driven by the self-attention mechanism \citep{ramsauer2020hopfield, wu2024attention}. However, adapting these frozen memory systems to new tasks presents a fundamental ``Plasticity-Stability'' dilemma. Current methods either risk catastrophic interference by modifying synaptic weights directly (e.g., LoRA) \citep{hu2021lora} or degrade associative capacity by clogging the retrieval buffer with static prompt tokens (e.g., VPT) \citep{jia2022vpt}. In this work, we propose H-Res (Hierarchical Residual Steering), a mechanism that modulates the effective energy landscape of the Transformer without altering its global equilibrium or expanding its sequence length. By formulating adaptation as a control problem on the activation manifold \citep{chen2018neuralode}, H-Res learns a state-dependent vector field that steers token trajectories into task-specific basins of attraction. We formally prove that H-Res preserves the attention entropy of the foundation model and facilitates Neural Collapse \citep{papyan2020prevalence}. Empirically, Manifold Steering outperforms global weight modification by 26\% on associative retrieval tasks and eliminates the computational overhead of prompt-based methods, scaling effectively to structured domains \citep{zha2023vtab}.

14.
arXiv (math.PR) 2026-06-17

Moment generating function of the tacnode process

作者:

arXiv:2606.17771v1 Announce Type: cross Abstract: The tacnode process is a universal determinantal point process arising in non-intersecting particle systems and random tiling models. In this paper, we study the generating function for the counting functions of the tacnode process on a union of $m$ intervals, $m\in\mathbb{N}^{+}$. Our first result provides an integral representation for the $m$-point generating function in terms of the Hamiltonian governing a system of $8m+4$ coupled differential equations. Combined with several differential identities for this Hamiltonian, the representation yields the large gap asymptotics, up to and including the constant term. As further applications, we obtain asymptotic formulae for the expectations, variances, and covariances of the counting functions, and establish a central limit theorem for their joint fluctuations. These results extend the previously known $1$-point theory for the tacnode process to the multi-interval setting with multiple discontinuities.

15.
arXiv (CS.AI) 2026-06-16

No One-Size-Fits-All Neurons: Task-based Neurons for Artificial Neural Networks

arXiv:2405.02369v2 Announce Type: replace-cross Abstract: In the past decade, many successful networks are on novel architectures, which almost exclusively use the same type of neurons. Recently, more and more deep learning studies have been inspired by the idea of NeuroAI and the neuronal diversity observed in human brains, leading to the proposal of novel artificial neuron designs. Designing well-performing neurons represents a new dimension relative to designing well-performing neural architectures. Biologically, the brain does not rely on a single type of neuron that universally functions in all aspects. Instead, in our brain, neurons are often task-based. In this study, we address the following question: since the human brain is a task-based neuron user, can the artificial network design go from the task-based architecture design to the task-based neuron design? Since methodologically there are no one-size-fits-all neurons, given the same structure, task-based neurons can enhance the feature representation ability relative to the existing universal neurons due to the intrinsic inductive bias for the task. Specifically, we propose a two-step framework for prototyping task-based neurons. As the initial step, we evaluate the proposed framework using polynomials as base functions. Empirically, systematic experimental results on synthetic data, classic benchmarks, and real-world applications show that the proposed task-based neuron design is not only feasible but also delivers competitive performance over other state-of-the-art models.

16.
arXiv (CS.CV) 2026-06-11

4DP-QA: Scalable QA for 4D Perception in Vision Language Models

Despite recent advances, Vision Language Models (VLMs) still struggle to grasp the dynamics of the world. We note that the ability to reason about a 4D scene, challenging in itself, is further complicated by two factors. First, VLMs observe motion indirectly via its projection onto 2D images. Second, existing datasets fail to disentangle object and camera motion. To address these challenges, we present a QA generation pipeline that focuses on motion-related scene understanding. We take particular care of the entanglement of camera and object motion by casting tracking in both the traditional way and in a novel, fixed reference system, dubbed True-Motion Tracking, which provides an intuitive description of motion. From this pipeline, we generate a large-scale training dataset of 400K samples, 4DP-QA (4D Perception QA), and a 2.2K-sample benchmark, 4DP-QA-Bench. Training existing models on our dataset yields performance improvements on an external benchmark, validating the effectiveness of our method.

17.
arXiv (quant-ph) 2026-06-15

Calibrated Helstrom geometry on the Bloch ball via Connes spectral distance

arXiv:2606.13824v1 Announce Type: new Abstract: We show that the equal-prior Helstrom trace-distance geometry of qubit states is recovered from Connes spectral distance in a finite scalar-qubit-scalar model. The two scalar reference sectors couple isotropically to the qubit block through identity Dirac links, so that the full Bloch ball, including mixed states, inherits its standard chordal trace-distance geometry from the finite spectral metric. The scalar-sector distances serve a distinct calibration role: they determine the individual link lengths, satisfy a Pythagorean consistency relation, and reconstruct the middle-sector scale.

18.
arXiv (CS.CV) 2026-06-15

StereoGeo: an end-to-end stereo camera calibration method

In this work, we propose StereoGeo, an end-to-end network-based approach for stereo camera calibration. Our method estimates the focal lengths and gravity directions of the left and right cameras, as well as the relative extrinsic transformation relating them. Existing methods often rely on calibration patterns in structured environments or address only a single camera configuration, being limited to either intrinsic or extrinsic estimation, and depending on a multi-view setups. StereoGeo extends the GeoCalib algorithm, integrating deep neural network feature extraction with a differentiable optimizer. Extensive experiments on real-world benchmarks demonstrate that StereoGeo achieves competitive performance for intrinsic calibration and provides accurate stereo extrinsic estimation, outperforming existing methods that are limited to monocular settings. The dataset used in this work is partially publicly available at https://github.com/meddourimane/StereoGeo-dataset.

19.
arXiv (CS.CV) 2026-06-24

Autonomous Video Generation with Counterfactual Controllability for Self-Evolving World Models

Existing literature claims that video generation essentially is world modelling. On the one hand, the claim is productive because it pushes generative AI beyond static images and toward temporally extended physical scenes. On the other hand, this claim dangerously relies on the belief that scaling visual prediction alone will automatically yield physical agents. We prefer a more accurate statement: video generation models learn a partial, implicit spatiotemporal world model, but not a fully grounded or controllable one. The reason is as follows: a model may generate a plausible video of a drone crossing a forest or a robot arm manipulating a cup, yet still fail to know which variables are controllable, which constraints belong to a particular body and which futures remain valid under intervention. The frontier in essence is not predictive realism alone, instead it emphasizes a self-evolving generative nature that requires the decisive criterion to be counterfactual controllability: the capability of asking what would happen under an action, to test whether the generated future can survive embodiment constraints and to feed the resulting action knowledge back into future imagination (generation). Therefore, in this paper we present a new perspective, i.e., autonomous video generation with counterfactual controllability is one promising way to realize self-evolving world models.

20.
arXiv (CS.LG) 2026-06-16

Learning the Geometry of Data: A Mathematical Review of Shape Space Analysis

arXiv:2606.17022v1 Announce Type: cross Abstract: A central objective of machine learning is to identify structure and patterns in data. Advances in data acquisition have increasingly produced datasets whose observations possess rich geometric form, giving rise to shape spaces that encode variability in object geometry. Such datasets arise across a wide range of disciplines, including biology, medicine, anthropology, and computer vision, where subtle geometric differences often carry important scientific information. Traditional machine learning methods, however, are frequently ill-equipped to account for the nonlinear geometric structure underlying these data. This survey synthesizes a rapidly growing body of work on shape space analysis, which provides a mathematical and computational framework for the study of geometric data. Drawing on ideas from differential geometry, statistics, and machine learning, we organize the literature around a common analytical pipeline: shape representation and parameterization, the rigorous construction of robust geodesic metrics, statistical analysis on shape spaces, and geometry-aware learning methods. We discuss how these tools enable the characterization of shape variability, the comparison of geometric objects, and the analysis of structural trajectories across populations and time. To illustrate the breadth of the field, we highlight applications spanning multiple scales of biological organization, including studies of subcellular morphology and primate tooth evolution. Across these and many other domains, researchers face common challenges arising from complex, nonlinear, and often unaligned geometric variation. The review concludes by identifying key theoretical and computational challenges, as well as emerging opportunities driven by increasingly large and diverse geometric datasets.

21.
arXiv (CS.LG) 2026-06-16

Audited Conformal Prediction for Classification under Unknown Distribution Shift

arXiv:2606.14909v1 Announce Type: cross Abstract: We consider the problem of uncertainty quantification for a pretrained classification model deployed under unknown distribution shift. We propose Audited Conformal Prediction (ACP), a method that leverages a small labeled dataset from the target population to train an auxiliary audit model identifying inputs where the legacy model is likely to fail. By integrating the audit model's outputs into the conformal prediction framework, ACP produces prediction sets that guarantee marginal coverage while achieving substantially higher conditional coverage in practice than existing approaches. We develop and analyze two complementary integration strategies – one targeting marginal coverage with improved conditional performance, the other providing explicit group-conditional coverage guarantees – and establish theoretical guarantees for both. Experiments on synthetic and real-world datasets validate the method and illustrate trade-offs between prediction set size and conditional coverage.

22.
arXiv (CS.AI) 2026-06-11

Designing AI-Supported Focus Groups: A Role x Modality Playbook

arXiv:2606.11835v1 Announce Type: cross Abstract: Collecting participants' lived experiences is central to design research. Focus groups are uniquely valuable because participants not only share individual accounts but also respond to one another, surfacing comparison, disagreement, and collective sensemaking. However, focus groups are resource-intensive and highly sensitive to facilitation: moderators must probe for specificity, balance participation, manage topic flow, and sustain psychological safety, and subtle facilitation choices can shape what becomes salient. Recent HCI work and commercial meeting tools show that generative AI can scaffold live conversation through prompting, turn regulation, thematic mapping, and real-time summarization. Yet UXR teams lack a clear map of what these capabilities mean in focus groups and what methodological risks they introduce. We synthesize AI supports for live conversation and translate them into a focus-group-specific playbook organized by AI role (tool, co-host, host) and modality (text, voice, embodied).We synthesize prior work on AI-supported live conversation and propose a focus-group-specific playbook of AI supports organized by role (tool, co-host, host) and modality (text, voice, embodied). We characterize interactional trade-offs and identify open questions for evaluating AI-supported focus groups as methodological configurations.

23.
arXiv (quant-ph) 2026-06-11

Strong-field control of the $Z$-boson resonance in $e^+e^-$ collisions

arXiv:2606.09394v2 Announce Type: replace-cross Abstract: Resonant $Z$-boson production is a cornerstone of precision electroweak physics, with its vacuum line shape set by the $Z$ mass, width, and collision kinematics. We show that a strong laser field can significantly alter this picture. By treating the field nonperturbatively, we find that laser dressing of the incoming fermions alters the effective collision kinematics and opens laser-photon exchange channels, including multiphoton processes, in $e^{+}e^{-}$ collisions. As a result, the $Z$-resonance profile develops distinct intensity-dependent regimes, evolving from the vacuum limit to saturation at intermediate field strengths and to an approximately quadratic enhancement at higher intensities. Additionally, the polarization composition of the produced $Z$ bosons is redistributed. In particular, at high intensities the laser-induced contribution can compensate the intrinsic chiral asymmetry of the electroweak interaction, leading to nearly parity-balanced $Z$-boson production. Our results identify that strong classical fields can dynamically control electroweak resonance phenomena, opening a bridge between strong-field QED and high-energy collider physics.

24.
arXiv (math.PR) 2026-06-11

Stochastic epidemic model with varying infectivity and waning immunity: the law of large numbers with unbounded infectivity

arXiv:2606.11845v1 Announce Type: new Abstract: We revisit the large population limit of our epidemic model with infection age dependent infectivity and progressive immunity waning, under the assumption that the supremum in $t$ of the random infectivity function has a finite expectation, while the previous proofs assumed that this supremum admits a deterministic upper bound.

25.
arXiv (CS.AI) 2026-06-24

OrbitForge: Text-to-3D Scene Generation via Reconstruction-Anchored Video Synthesis

arXiv:2606.24799v1 Announce Type: cross Abstract: Generic text-to-video models can be used as rich open-world scene priors. Despite the high quality of today's generated videos, they do not directly yield reliable 3D assets: camera motion is difficult to control, view coverage is partial, and frames often contain inconsistencies across time. We introduce OrbitForge, an adapter built from frozen video priors and per-prompt Gaussian Splatting reconstruction optimization that converts a single text-generated video into a canonical closed-orbit 3D Gaussian Splatting scene. We use 3D reconstruction as an anchor to improve the 3D consistency of the generated video. We obtain a preliminary 3D reconstruction from a first generated video via Deformable Gaussian Splatting with a robust MedianGS proxy. We render views from a prescribed orbit to detect missing viewpoints. OrbitForge uses the text-to-video model to complete only the missing views, and reconstructs the completed orbit into a final Gaussian Splatting scene. This design requires no task-specific video or multiview fine-tuning, avoids per-prompt score-distillation optimization, and does not progressively generate views one step at a time. We further argue that this setting demands coverage-aware evaluation: local smoothness alone rewards methods that never attempt a full orbit. On a frozen 300-prompt T3Bench-derived audit, OrbitForge reconstruction attains a 359.0-degree measured median span, raises originally unsupported-bin Q10 ImageReward from 8.07 to 16.36 relative to MedianGS-only reconstruction, while remaining competitive with VideoMV on the coverage-quality.