Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-12

MARS: Margin-Adversarial Risk-controlled Stopping for Parallel LLM Test-time Scaling

arXiv:2606.12935v1 Announce Type: new Abstract: Parallel test-time scaling samples many reasoning traces and majority-votes their answers, improving LLM accuracy but requiring traces to run to completion, incurring substantial computational overhead. We observe that probing partial traces at intermediate checkpoints can extract current answers without disrupting generation, revealing an evolving aggregate vote. Based on this observation, we introduce MARS, a margin-adversarial stopping rule that estimates which active traces are likely to change their answers and stops once the leader remains safe under a conservative bound on future vote movement. The rule separates two sources of uncertainty. It learns the trace-level switch probabilities that determine how much of the current margin is likely to be retained, while handling the harder question of where switching traces land through an adversarial bound calibrated from warmup traces. With true switch probabilities, MARS guarantees with high probability that the early-stopped answer matches the full-budget vote. In practice, a five-feature logistic model closely matches oracle switching behavior. Across three reasoning models and three competition-math benchmarks, MARS saves 25-47% of self-consistency tokens and 14-29% on top of DeepConf Online, a strong confidence-weighted baseline that already filters and truncates weak traces, while matching the accuracy of the corresponding full-budget baselines.

02.
arXiv (CS.CV) 2026-06-12

Why Commodity WiFi Sensors Fail at Multi-Person Gait Identification: A Systematic Analysis Using ESP32

WiFi Channel State Information (CSI) has shown promise for single-person gait identification, raising interest in its use for contactless biometrics, continuous authentication, and passive identification. However, the feasibility of multi-person identification on low-cost commodity devices remains unclear. A critical question is whether weak multi-person performance is primarily an algorithmic limitation, or whether it reflects a more fundamental sensing ceiling on commodity WiFi hardware. We address this question through a systematic empirical study using commodity ESP32 WiFi sensors. We evaluated six different signal separation methods–FastICA, SOBI, PCA-ICA, NMF, Wavelet, and Tensor decomposition–across seven scenarios spanning 1-10 people in both controlled and realistic indoor environments. To investigate beyond classification accuracy, we introduce three diagnostic metrics: intra-subject variability (ISV), inter-subject distinguishability (ISD), and performance degradation rate (PDR). In all methods, performance remains moderate (39%-56% accuracy), with limited evidence that algorithmic choice alone solves the problem. The best-performing method, NMF, reaches 56% accuracy, while all methods exhibit extremely high feature-space overlap (97%-99%), unstable within-subject representations, and marked environmental sensitivity. These findings suggest that, under commodity ESP32 CSI constraints, dense multi-person gait identification is limited more by sensing quality and spatial diversity than by the chosen separation algorithm. Our results have direct implications for security and privacy: they call into question the practicality of commodity WiFi CSI as a robust multi-user biometric primitive for authentication, while also placing important bounds on the passive identification capabilities achievable with low-cost off-the-shelf WiFi hardware.

03.
arXiv (CS.CV) 2026-06-12

Diffusion Transformer World-Action Model for AV Scene Prediction

Action-conditioned world models let an autonomous vehicle predict future camera scenes from its own planned controls, enabling planning and simulation without real-world rollouts, but at compact, trainable scale the futures are ambiguous and the field's standard distortion metrics actively mislead: they reward a blurry regression mean over a realistic prediction. We confront this with a compact latent world model that, given the present front-camera latent and a sequence of ego-actions, predicts future scene latents a frozen decoder renders to $256 \times 256$ frames up to 8 seconds ahead, evaluated on 150 held-out nuScenes scenes. We first benchmark where to predict: across six frozen encoders spanning four representation families, V-JEPA2 with temporal context reduces steering RMSE by 40% over the best single-frame encoder. We then train a latent Diffusion Transformer (DiT) and, through a controlled diagnosis, identify the four ingredients it needs: spatial tokens, the $x_0$ objective, residual anchoring, and sampling matched to target uncertainty. In a Stable-Diffusion-VAE encode-predict-decode pipeline we expose the central tension: distortion metrics (cosine similarity, SSIM) favor the blurry mean, masking that the diffusion model is far closer to the real frame distribution. Inception-based FID and KID reveal a clean perception-distortion frontier: diffusion attains KID 0.078 versus 0.375 for regression ($4.8\times$ better), and a deployable train-derived calibration makes this practical without test-time ground truth. The model is genuinely action-controllable (steering drives scene displacement, Spearman $\rho = 0.81$, vs $-0.18$ for regression). We trace limited single-pass motion to a shared-present anchor and engineer a compact 1.7M-parameter "jump" model that recovers full ground-truth motion magnitude ($1.02\times$ GT), where single-pass models capture less than half.

04.
arXiv (CS.CV) 2026-06-18

CrossEarth-Gate: Fisher-Guided Adaptive Tuning Engine for Efficient Adaptation of Cross-Domain Remote Sensing Semantic Segmentation

In Remote Sensing (RS), Parameter-Efficient Fine-Tuning (PEFT) has emerged as a key approach to activate the generalizable representation ability of foundation models for downstream tasks. However, existing specialized PEFT methods often fail when applied to large-scale Earth observation tasks, as they are unable to fully handle the multifaceted and unpredictable domain gaps (e.g., spatial, semantic, and frequency shifts) inherent in RS data. To overcome this, we propose CrossEarth-Gate, which introduces two primary contributions. First, we establish a comprehensive RS module toolbox to address multifaceted domain gaps, comprising spatial, semantic, and frequency modules. Second, we develop a Fisher-guided adaptive selection mechanism that operates on this toolbox. This selection is guided by Fisher Information to quantify each module's importance by measuring its contribution to the task-specific gradient flow. It dynamically activates only the most critical modules at the appropriate layers, guiding the gradient flow to maximize adaptation effectiveness and efficiency. Comprehensive experiments validate the efficacy and generalizability of our method, where CrossEarth-Gate achieves state-of-the-art performance on 16 out of 18 cross-domain benchmarks for RS semantic segmentation.

05.
arXiv (CS.CV) 2026-06-16

3D Consistency Optimization for Self-Supervised Monocular Video Depth Estimation

Reliable monocular video depth estimation is crucial for downstream 3D reasoning and embodied AI in endoscopic navigation. However, existing self-supervised approaches typically treat video frames independently or rely on weak temporal regularization. These methods, lacking a holistic perception of the underlying 3D scene, inevitably suffer from geometrically inconsistent predictions and severe cross-frame drift. To address these limitations, we introduce a new paradigm that recasts sequential video depth estimation as an unconstrained multi-view 3D reconstruction problem, enabling full exploitation of the powerful geometric priors embedded in recent 3D foundation models. The core of our approach is a 3D consistency optimization framework driven by three constraints: image-level photometric rendering, explicit world-coordinate geometric alignment, and multi-scale temporal gradient consistency. Such unified optimization elegantly anchors isolated frames to a globally coherent 3D structure. Our method has been validated in both the self-supervised training scenarios and challenging zero-shot clinical environments. Results show that the proposed approach achieves state-of-the-art spatial accuracy, outperforming the frame-based, video-based depth estimators and the multi-view 3D reconstruction baselines.

06.
arXiv (CS.CV) 2026-06-17

Revisiting LLM Adaptation for 3D CT Report Generation: A Study of Scaling and Diagnostic Priors

Recent advances in multimodal learning, including large language models (LLMs) and vision-language models (VLMs), have demonstrated strong adaptability to natural images. However, extending their use to the medical domain, particularly for volumetric (3D) images, is challenging due to high computational complexity, volumetric dependencies and the semantic gap between visual features and clinical terminology. Naively fine-tuning LLMs on limited medical data often leads to overfitting and clinical hallucination, where linguistic fluency is prioritized over clinical factuality. In this study, we investigate parameter-efficient adaptation strategies for volumetric CT report generation and introduce RAD3D-Prefix, a lightweight diagnostic-prior conditioning framework that minimizes the need for extensive parameter training. This module integrates image embeddings with multi-label diagnostic classification logits, preserving critical clinical details while bridging the semantic gap. By keeping the LLM frozen, our method requires minimal trainable parameters and mitigates the risk of overfitting on small, domain-specific datasets. Through a systematic study spanning LLMs from 96.1M to 1.6B parameters, we find that fine-tuning is most beneficial for smaller LLMs, whereas freezing larger (~1B+ LLMs and training only lightweight projection layers provides a superior trade-off between performance, generalization, and computational efficiency. Across multiple automatic metrics and a clinical reader study, RAD3D-Prefix outperforms comparable parameter-efficient baselines and demonstrates strong out-of-domain generalization while using substantially fewer trainable parameters than fully fine-tuned alternatives.

07.
arXiv (CS.CL) 2026-06-18

TW-LegalBench: Measuring Taiwanese Legal Understanding

Large language models (LLMs) have shown impressive capabilities across diverse tasks, yet their performance on jurisdiction-specific legal reasoning remains underexplored. We present TW-LegalBench that utilizes Taiwanese legal system's rich official corpus open to the public to fill the gap in evaluating LLMs on Taiwanese law, among common-law benchmarks that focus on English sources and civil-law benchmarks focusing on sources of Simplified Chinese. TW-LegalBench comprises three task types: (1) over 16,000 multiple-choice questions (MCQs) across five years of official examinations in 18 professional domains; (2) 117 open-ended essay questions (OEQs) from examinations for legal professionals with official scoring rubrics; and (3) more than 14,000 legal judgment prediction (LJP) instances covering hundreds of crime categories. We evaluate 13 LLMs using accuracy for MCQs, a decomposed LLM-as-Judge framework based on the scoring rubric points for OEQs, and metrics for sentencing accuracy and statute citation for LJP. Our results reveal that top-performing models exceed the passing threshold for qualified lawyers (passing rate: 11%) but fall short of that for judges and prosecutors (passing rate: 1~2%). For LJP, while models demonstrate reasonable verdict type accuracy and sentence prediction capability, they struggle to cite exact legal articles. These findings highlight that reliable legal text generation remains challenging for LLMs, even though their performance on qualification examinations approaches human level.

08.
arXiv (CS.AI) 2026-06-19

AutoPass: Evidence-Guided LLM Agents for Compiler Performance Tuning

arXiv:2606.20373v1 Announce Type: cross Abstract: Large Language Models (LLMs) show promise for code compilation tasks, but applying them to runtime performance tuning is difficult due to complex microarchitectural effects and noisy runtime measurements. We present AutoPass, a multi-agent framework for compiler performance tuning that uses compiler and runtime evidence to guide LLM-generated optimization decisions. Rather than treating the compiler as a black box like prior auto-tuning schemes, AutoPass opens up the compiler to the LLM, enabling it to query compiler-internal optimization states and analyze the intermediate representation to orchestrate compiler options. The search process iteratively refines optimization configurations using measured runtime feedback to diagnose regressions and guide latency-improving edits. AutoPass operates in an inference-only, training-free setting and requires no offline training or task-specific fine-tuning, making it readily applicable to new benchmarks and platforms. We implement AutoPass on the LLVM compiler and evaluate it on server-grade x86-64 and embedded ARM64 systems. AutoPass outperforms expert-tuned heuristics and classical autotuning methods, achieving geometric-mean speedups of 1.043x and 1.117x over LLVM -O3 on x86-64 and ARM64, respectively.

09.
arXiv (CS.LG) 2026-06-12

Optical Implementation of Equilibrium Propagation Using Spatial Photonic Ising Machines

arXiv:2606.13454v1 Announce Type: cross Abstract: Equilibrium Propagation offers a compelling alternative to traditional machine learning for training energy-based networks. Here we demonstrate a hybrid optical-digital implementation of EP using a Spatial Photonic Ising Machine (SPIM). The SPIM exploits the gauge transformation method to optically encode both continuous neuron states and rank-1 binary trainable patterns as phase modulations via a spatial light modulator, with inference realized using a finite difference scheme. The experimental system is evaluated on the Wine classification dataset. The potential of this approach, including the use of continuous couplings and structured coupling matrices, is evaluated numerically on the more complex MNIST dataset. Our work provides a concrete pathway toward energy-efficient physical implementations of Equilibrium Propagation.

10.
arXiv (quant-ph) 2026-06-11

Fundamental Limitations of QAOA on Constrained Problems and a Route to Exponential Enhancement

arXiv:2511.17259v4 Announce Type: replace Abstract: We study fundamental limitations of the generic Quantum Approximate Optimization Algorithm (QAOA) on constrained problems where valid solutions form a low dimensional manifold inside the Boolean hypercube, and we present a provable route to exponential improvements via constraint embedding. Focusing on permutation constrained objectives, we show that the standard generic QAOA ansatz, with a transverse field mixer and diagonal r local cost, faces an intrinsic feasibility bottleneck: even after angle optimization, circuits whose depth grows at most sublinearly with n cannot raise the total probability mass on the feasible manifold much above the uniform baseline suppressed by the size of the full Hilber space. Against this envelope we introduce a minimal constraint enhanced kernel (CE QAOA) that operates directly inside a product one hot subspace and mixes with a block local XY Hamiltonian. For permutation constrained problems, we prove an angle robust, depth matched exponential enhancement where the ratio between the feasible mass from CE QAOA and generic QAOA grows exponentially in $n^2$ for all depths up to a linear fraction of n, under a mild polynomial growth condition on the interaction hypergraph. Thanks to the problem algorithm co design in the kernel construction, the techniques and guarantees extend beyond permutations to a broad class of NP-Hard constrained optimization problems.

11.
arXiv (CS.LG) 2026-06-19

Judging to Improve: A De-biased VLM-as-3D-Judge Protocol for Single-Image 3D Generation

arXiv:2606.20364v1 Announce Type: new Abstract: A companion study established a de-biased, cross-model VLM-as-3D-judge that reliably ranks single-image-to-3D mesh quality where cheap geometry and CLIP proxies fall short. This paper asks: can that judge's preferences specialize a strong open generator, TRELLIS, on one asset class (furniture), cheaply and without human labels? Taking the judge from ranking to optimization is where the work lives. Pushing a VLM judge into the training and evaluation loop exposes failure modes ranking never triggered, so our contribution is an optimization-grade hardening of the judge: a training judge (Qwen2.5-VL-7B) held distinct from an evaluation judge (InternVL3-8B) to break circularity; position-bias correction; and fixes for three failure modes (image overload, geometry-hiding splat renders, and reference-free judging that rewards clean-but-wrong outputs), with calibration evidence (clear-gap win-rate 0.83-1.0; base-vs-base ~0.5). Using this protocol as an independent evaluator, and working only from public models and data with lightweight parameter-efficient adaptation, we find our methods match the strong base rather than exceed it. Independent base samples carry essentially no learnable preference (0.94 order-flip rate), so signal must be engineered by quality-contrastive construction. Across six adaptation methods, two input regimes, and a severity sweep, the most targeted - conditioner repair under severe degradation - reaches parity (0.50) with the base, while no method clears the >=65% win-rate target. The result is mechanistic: clean inputs saturate the judge, flow-DIT fine-tuning washes out through the sampler, and conditioning repair is the locus that moves geometry. Win-rates are directional at n=8 objects. Matching a strong public-data base with cheap adaptation is itself informative: exceeding it needs more than lightweight PEFT on public data, and the judge protocol is reusable.

12.
arXiv (CS.AI) 2026-06-18

UBP2: Uncertainty-Balanced Preference Planning for Efficient Preference-based Reinforcement Learning

arXiv:2606.19328v1 Announce Type: cross Abstract: Preference-based RL provides an approach to learning reward models from pairwise comparisons of behaviors, bypassing the need for explicit reward design. However, existing methods typically rely on passive data collection and suffer from poor sample efficiency, especially during the early stages of learning. We introduce a model-based approach that actively directs exploration by jointly reasoning over uncertainties in the reward, dynamics, and value functions. Our method, Uncertainty-Balanced Preference Planning (UBP2), uses ensembles of reward, dynamics, and value function models to evaluate candidate trajectories according to a unified score that combines expected reward, terminal value, and epistemic uncertainty. Planning under this objective yields an explicit tradeoff between exploitation and information acquisition without requiring ad hoc exploration heuristics. Under standard regularity assumptions, we establish sublinear regret guarantees for both finite-horizon and infinite-horizon settings. Empirically, experiments on the Meta-World benchmark show UBP2 achieves substantially higher sample efficiency than model-free preference-based methods and non-optimistic model-based baselines.

13.
arXiv (quant-ph) 2026-06-16

Temporal modulation as a resource: enhanced frequency estimation in continuous variable systems

arXiv:2606.15108v1 Announce Type: new Abstract: Frequency estimation, a cornerstone of quantum metrology, has been significantly enhanced by advanced quantum sensing strategies. However, most protocols rely either on static or time-independent encoding mechanisms, inherently limiting their achievable precision scaling, or on control strategies requiring changing the Hamiltonian and/or implementing feedback mechanisms. To overcome this, we investigate a simpler dynamical encoding protocol where the quantum oscillator is driven by a general continuous temporal frequency modulation $\Omega(t) = \omega_0 f(t)$. We analytically demonstrate that for a given modulation profile $f(t)$ and its corresponding time-integral $F(t)$, the quantum Fisher information (QFI) scales as $\mathcal{O}(F(t)^2)$. This enhancement stems from the fact that temporal encoding fundamentally alters the mechanism of dynamical phase accumulation. Crucially, when evaluated under the energy and evolution-time constraints, this framework reveals a genuine precision enhancement over the conventional time-independent baseline. By analyzing explicit polynomial and exponential modulations, we establish that arbitrary precision scaling can be deterministically engineered, with ultimate bounds that are asymptotically saturable via optimal homodyne detection. Our framework provides a universal paradigm for exploiting time-dependent quantum control in next-generation sensors.

14.
arXiv (CS.CV) 2026-06-18

URDF Synthesis from RGB-D Sequences via Differentiable Joint Inference and Energy-Consistent Verification

作者:

Reconstructing simulation-ready digital twins of articulated objects from sensor observations remains constrained by two persistent gaps: (i) part-level geometric reconstruction is decoupled from kinematic-parameter estimation, and (ii) the recovered models often violate basic dynamic invariants such as energy conservation, leading to drift when the URDF is replayed in physics simulators. We present KinemaForge, a constraint-driven pipeline that jointly infers part-level shape, joint topology, and joint parameters from short RGB-D sequences and validates the result against an energy-consistent verifier built on differentiable rigid-body dynamics. The pipeline introduces three components: a kinematic constraint graph that encodes joint-part incidences as soft edges; a differentiable screw-axis solver that backpropagates from rendered observations through Featherstone's articulated-body algorithm to joint parameters; and an energy residual loss that penalises non-physical free responses of the reconstructed model. Across five PartNet-Mobility categories and an internal RGB-D benchmark, KinemaForge reduces the average joint-axis error from 4.52 degrees to 2.83 degrees (-37.4%) over the strongest geometric baseline (PARIS) and from 5.30 degrees to 2.83 degrees (-46.6%) over the interaction-based Ditto baseline, lowers long-horizon simulation drift by 64% (vs. PARIS) over 50 s rollouts, and yields URDFs whose closed-loop manipulation success rate improves by 14.6 percentage points over Ditto in our preliminary evaluation. Code and reconstruction data will be released upon acceptance.

15.
arXiv (CS.CV) 2026-06-16

JoyAI-VL-Interaction: Real-Time Vision-Language Interaction Intelligence

Many moments in the real world do not wait for a user to ask. A fire starts on a security monitor, an expression flickers across a video call, or a product a viewer wants flashes by in a livestream. Yet today's large models remain mostly turn-based by design: they answer only when addressed, and even video-call apps that appear interactive still operate as question-answer systems, reacting only when polled or prompted. We argue for a different paradigm: a model that is present in the world like a person. It continuously watches what is happening now, decides on its own whether to speak or stay silent, interacts in real time, and delegates to a background model when the problem is hard. To advance interaction models and their adoption across domains, we make two fully open-sourced contributions. First, we release JoyAI-VL-Interaction, an 8B-scale, vision-first VL-interaction model. The model makes the response decision internally, choosing each second to stay silent, respond, or delegate to a background model, and it excels at vision-triggered responsiveness and time awareness. We pair it with a transferable training recipe, from which capabilities we never trained for emerge, such as guiding a shopper through changing app screens or improvising a lecture from a slide deck. Second, we release a complete, deployable system built around that model. The system streams any ongoing video into the model, making it genuinely present in the world. All other components are pluggable, including ASR/TTS modules, memory, visualization UI, and a background brain that can connect to any API or agent. Across six real-world scenarios, human raters prefer JoyAI-VL-Interaction over the in-app video-call assistants of Doubao and Gemini by a wide margin. To our knowledge, this is the first open, vision-driven interaction model released together with its training recipe, data, and complete deployable system.

16.
arXiv (CS.CV) 2026-06-12

CD-RCM: Generalizable Continuous-Depth Novel View Synthesis for Reflectance Confocal Microscopy

Reflectance confocal microscopy (RCM) provides noninvasive, cellular-resolution "optical biopsies" of human skin in vivo by acquiring en-face images at successive depths, forming a sparse z-stack. Due to optical limitations, these stacks are anisotropic 3D volumes with lateral resolution (0.5 $\mu$m) $\sim$6 times higher compared to axial resolution, which is defined by the optical sectioning (3 $\mu$m), limiting the interpretation of tissue. Our goal is to provide continuous-depth visualization by interpolating intermediate sections and making the 3D volume isotropic. Such a representation permits arbitrary-direction sectioning, including histopathology-like cross-sectional examination, without requiring per-patient optimization. To that end, we introduce the first RCM-specific novel-view synthesis (NVS) approach, CD-RCM, a feedforward model that predicts realistic, unseen depths from sparsely sampled RCM stacks. Classical neural rendering methods focus on reconstruction from surface-level multi-view observations. In contrast to surface-level camera views, RCM can acquire optically sectioned en-face images of tissue beyond the surface up to 200 $\mu$m. However, during visualization of the RCM stacks, observations of the shallower sections (towards the surface) obscure the deeper ones. This unique axial imaging geometry and layer-dependent anatomical organization motivated our development of a tailored architectural and training framework that explicitly accounts for RCM's depth-resolved, occlusive imaging physics. Experiments demonstrate that CD-RCM achieves high-fidelity novel-view synthesis with sub-second inference time.

17.
arXiv (CS.CL) 2026-06-18

TurnGuide: Enhancing Meaningful Full Duplex Spoken Interactions via Dynamic Turn-Level Text-Speech Interleaving

Full-Duplex Speech Language Models (FD-SLMs) are specialized foundation models designed to enable natural, real-time spoken interactions by modeling complex conversational turn-taking such as interruptions, backchannels, and overlapping speech. End-to-end (e2e) FD-SLMs leverage real-world double-channel conversational data to capture nuanced two-speaker dialogue patterns for human-like interactions, but their conversational abilities often degrade compared to pure-text conversation due to prolonged speech sequences and limited high-quality spoken dialogue data. Although interleaved text-speech generation could mitigate this degradation, integrating discrete text tokens into continuous double-channel audio streams could disrupt the precise time alignment required for fluid interaction. To address this, we propose TurnGuide, a novel text-speech interleaved generation approach for e2e FD-SLMs that dynamically segments assistant speech into dialogue turns and interleaves turn-level text and speech generation. This approach allows FD-SLMs to integrate the semantic intelligence of LLMs without compromising the natural acoustic flow. Extensive experiments show that TurnGuide not only significantly improves e2e FD-SLMs to produce semantically meaningful, coherent speech but also achieves state-of-the-art performance on various turn-taking events. Demos are available at https://dreamtheater123.github.io/TurnGuide-Demo/. Code is available at https://github.com/dreamtheater123/TurnGuide.

18.
arXiv (CS.LG) 2026-06-16

CREST: Deployment-Realistic Hardware-in-the-Loop NAS for Embedded Sensing Systems

arXiv:2606.15004v1 Announce Type: cross Abstract: Deploying neural networks on low-power microcontrollers (MCUs) requires selecting model architectures under tight memory, latency, and energy constraints. Existing workflows often simplify this process along one or more axes: static proxy costs such as FLOPs or parameters, treating one MCU as representative, and continuous-inference tests instead of deployed sensing schedules. These assumptions can mis-rank Pareto-front candidates, miss infeasible deployments, and obscure schedule-dependent energy. We present CREST (Cross-platform Runtime Evaluation and Search Tool), a deployment-realistic hardware-in-the-loop (HIL) neural architecture search (NAS) framework for MCU sensing systems. CREST keeps the optimizer, HIL measurement boundary, logging, and replay workflow fixed while exposing workload, model family, target backend, schedule, quantization, and scoring policy as configurable axes. This makes deployment effects experimentally separable within one reusable workflow. We evaluate CREST on inertial odometry and audio classification across three Arm Cortex-M targets. For inertial odometry, measured-energy HIL search reduces median per-inference energy by 41.7% versus FLOPs-based selection and 40.8% versus memory-traffic-based selection at similar error. FLOPs-based selection also chooses infeasible deployments on memory-constrained targets. On the STM32 N657 target, continuous-inference and duty-cycled searches produce different Pareto frontiers. For audio classification, the same application-level policy selects different DS-CNN architectures on different boards, and cross-board replay changes deployment cost substantially. Overall, CREST shows that deployment-realistic MCU NAS must jointly optimize model architecture, target platform, runtime schedule, and deployment policy rather than relying only on static proxy costs or continuous-inference measurements.

19.
arXiv (CS.CV) 2026-06-16

Position: The Systemic Lack of Agency in Visual Reasoning

This paper argues that a systemic lack of Agency constrains the implicit reasoning capabilities of current Vision-Language Models (VLMs). Implicit reasoning refers to the ability to autonomously discover and utilize hidden visual evidence to bridge information gaps, rather than merely relying on explicitly specified targets. This capacity underlies human visual understanding and everyday reasoning. We argue that this limitation arises from a tendency to approach visual reasoning primarily as passive semantic retrieval, rather than as active, situated reasoning that depends on autonomous visual exploration. As a result, most existing benchmarks primarily assess Passive Capacity, leaving this aspect of reasoning largely unmeasured. To address this gap, we introduce the Visual Implicit Reasoning Diagnosing Benchmark (V-IRD), which targets this missing quadrant by requiring models to derive answers strictly through autonomous visual analysis. Our results show that, despite strong retrieval abilities, prominent VLMs struggle to utilize reference objects and to attend to visual evidence that requires self-directed inquiry. Simply put, strong semantic recognition does not equate to active visual exploration, revealing a critical gap in current VLMs. More information can be found at https://haoychen.github.io/Implicit-Reasoning/

20.
arXiv (CS.AI) 2026-06-16

Emergent Strategic Reasoning Risks in AI: A Taxonomy-Driven Evaluation Framework

arXiv:2604.22119v2 Announce Type: replace Abstract: As reasoning capacity and deployment scope grow in tandem, large language models (LLMs) gain the capacity to engage in behaviors that serve their own objectives, a class of risks we term Emergent Strategic Reasoning Risks (ESRRs). These include, but are not limited to, deception (intentionally misleading users or evaluators), evaluation gaming (strategically manipulating performance during safety testing), and reward hacking (exploiting misspecified objectives). Systematically understanding and benchmarking these risks remains an open challenge. To address this gap, we introduce ESRRSim, a taxonomy-driven agentic framework for automated behavioral risk evaluation. We construct an extensible risk taxonomy of 7 categories, which is decomposed into 20 subcategories. ESRRSim generates evaluation scenarios designed to elicit faithful reasoning, paired with dual rubrics assessing both model responses and reasoning traces, in a judge-agnostic and scalable architecture. Evaluation across 11 reasoning LLMs reveals substantial variation in risk profiles (detection rates ranging 14.45%-72.72%), with dramatic generational improvements suggesting models may increasingly recognize and adapt to evaluation contexts.

21.
arXiv (CS.LG) 2026-06-17

RadSEM: A Finding-by-Finding Metric for Clinical Consistency in Radiology Reports

arXiv:2606.17062v1 Announce Type: cross Abstract: Radiology report evaluation must distinguish clinical compatibility from surface similarity, because negation, laterality, or normal-abnormal polarity can reverse a finding. We propose RadSEM (Radiology Sentence-Level Evaluation Metric), a constrained LLM-assisted metric for reference-based evaluation of radiology Findings. RadSEM rewrites reference and generated reports into ordered atomic finding sentences, each expressing one site-finding proposition. It then performs contradiction-constrained many-to-many matching: incompatible pairs such as "effusion" and "no effusion" receive no credit, while compatible granularity differences can receive partial credit. A deterministic stage weights pairs by part-whole and abnormal-detail relationships, counts unmatched findings, and produces an abnormal-focused weighted F1 score. Thus, the LLM supports structured rewriting and local alignment rather than acting as an opaque judge. We evaluate RadSEM with SSREE, a controlled monotonicity stress test built from 2,448 de-identified reports expanded into five graded corruption levels. RadSEM achieves Kendall tau_b of 0.957, all-pairs concordance of 97.8%, adjacent concordance of 95.0%, and strict five-level ordering for 81.9% of reports, outperforming radiology-specific and general text metrics while avoiding the failure in which polarity-inverted reports regain lexical overlap. On the same SSREE set, RadSEM outperforms the Ref-anchored RadSEM-Alt policy, improving adjacent concordance from 90.7% to 95.0% and strict ordering from 67.2% to 81.9%. On a 599-triplet synonym/antonym subset, RadSEM prefers synonyms in 597 cases (99.67%). These results suggest that explicit finding units, contradiction-aware matching, and abnormal-focused deterministic scoring make report scoring more interpretable and sensitive to clinically meaningful errors. Code is available at https://github.com/jdh-algo/RadSEM.

22.
arXiv (CS.AI) 2026-06-19

How Do Instructions Shape Speech? Cross-Attention Attribution for Style-Captioned Text-to-Speech

arXiv:2606.20532v1 Announce Type: new Abstract: Style-captioned text-to-speech systems use natural language to control voice characteristics, but how individual words influence acoustic output remains unclear. Understanding this is critical for diagnosing failure modes and improving controllability in expressive TTS. We propose cross-attention attribution for speech diffusion models, adapting the DAAM framework to the speech domain for the first time, and apply it to CapSpeech-TTS. Our method extracts per-token heatmaps across 25 layers and 24 ODE steps. We analyze 3,600 (style caption, text transcript) combinations comprising 120 style captions conditioning the generation of 30 text transcripts each, revealing how caption tokens shape waveforms. Results show: (1) style tokens have lower temporal variance than content/function tokens, confirming global conditioning; (2) style attention correlates with F0 and energy; (3) style conditioning peaks in early steps and deep layers; (4) attention entropy reaches its minimum at layer 17, co-occurring with the style importance peak, indicating maximal network selectivity at the most style-critical stage. This is the first study of how natural language influences cross-attention in speech diffusion models

23.
arXiv (CS.AI) 2026-06-15

CoRe-MoE: Contrastive Reweighted Mixture of Experts for Multi-Terrain Humanoid Locomotion with Gait Adaptation

arXiv:2606.04718v3 Announce Type: replace-cross Abstract: Humans primarily rely on walking and running to traverse complex terrains. Similarly, humanoid robots should be able to smoothly transition between walking and running while maintaining natural and stable locomotion. However, unifying gait transition and multi-terrain adaptation within a single policy remains challenging due to gradient interference between tasks and the distribution shift caused by terrain variations. Although Mixture-of-Experts (MoE) architectures can mitigate multi-skill interference, direct joint training often fails to achieve clear expert specialization. To address these challenges, we propose CoRe-MoE, a two-stage reinforcement learning framework that decouples gait generation from terrain adaptation. In the first stage, a stable locomotion policy is learned to produce natural walking and running behaviors with smooth transitions. In the second stage, a terrain-aware MoE branch is introduced, and the gating network is trained with a contrastive objective to learn structured terrain representations and promote expert specialization. The final action is obtained through weighted fusion of the base gait policy and the terrain-aware branch, enabling the policy to preserve stable locomotion while adapting to complex terrains. Extensive simulation results demonstrate that the proposed method outperforms baseline approaches in terms of success rate, locomotion stability, and multi-terrain adaptability. Furthermore, zero-shot deployment on a Unitree G1 humanoid robot validates the effectiveness of our framework, achieving robust walking and running across stairs, slopes, steps, obstacles, and unstructured outdoor terrains while maintaining accurate foothold control and dynamic stability.

24.
arXiv (CS.AI) 2026-06-12

Reducing the Complexity of Deep Learning Models for EEG Analysis on Wearable Devices

arXiv:2606.12742v1 Announce Type: new Abstract: Wearable healthcare devices are the fastest-growing Internet of Things (IoT) sector. Many automated healthcare services rely on two crucial biological signals, namely ECG and EEG, which reflect the activity of the heart and brain, respectively. Although deep neural networks are considered the primary way to process and analyze these signals, the very tight energy and computational power constraints in wearable devices are far below the computational, energy, and memory bandwidth demands of DNN models, thereby impeding the deployment of deep learning in many practical wearable services. This paper investigates the feasibility of deploying state-of-the-art DNN models in resource-constrained wearable devices. Notably, we explore the trade-off between accuracy and computational complexity of DNNs when parameter quantization and electrode reduction methods are used. Our investigation centers on several state-of-the-art DNN models designed for EEG signal analysis, specifically for detecting epileptic seizures. Our findings demonstrate that, when applied judiciously, these techniques can significantly reduce the complexity of the DNNs under consideration with minimal adverse effects on accuracy. These results reveal the explicit trade-offs between accuracy and complexity reduction encountered when adapting DNN-based online EEG analysis for wearable devices.

25.
arXiv (CS.LG) 2026-06-11

SPADE: Split-and-Delay Embeddings for Autoregressive High-Granularity Calorimeter Simulation

arXiv:2606.11304v1 Announce Type: cross Abstract: We introduce SPADE (SPlit And Delay Embeddings), an autoregressive transformer for sequences whose tokens carry multiple features. Rather than embedding these features jointly, SPADE embeds them independently. Delaying each feature stream relative to the previous one allows intra-token correlations to be learned by the standard self-attention mechanism. Applied to point-cloud calorimeter shower generation in the highly granular ILD detector, SPADE is competitive with the state of the art AllShowers model on photon showers, and substantially outperforms its VQ-VAE-based predecessor OmniJet-$\alpha_C$. The mechanism is applicable to any generative task with multi-feature tokens, enabling LLM-style pretraining workflows for higher-dimensional data.