Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CV) 2026-06-11

DrivingAgent: Design and Scheduling Agents for Autonomous Driving Systems

Many autonomous driving systems are increasingly incorporating foundation models to improve generalization and handle long-tail scenarios. However, this trend introduces two key challenges: (i) the manual and labor-intensive process of designing and integrating new models, and (ii) the lack of intelligent, dynamic scheduling mechanisms to meet strict real-time constraints. While Large Language Model (LLM)-based agents offer a promising avenue for automation, existing frameworks are ill-suited for autonomous driving. Specifically, they fail to distinguish between the fundamentally different requirements of system design and real-time scheduling, treat modules as opaque black boxes, and are not designed for continuous operation. To address these limitations, we propose DrivingAgent, a novel agent framework tailored to the dual challenges of autonomous driving system design and scheduling. In the design phase, DrivingAgent automates module development by interpreting system architecture, generating code, and validating modules via super-network training. In the scheduling phase, it employs a lightweight LLM trained with reinforcement learning to dynamically orchestrate system modules in real time, supported by a structured memory that integrates long-term storage with timestamped short-term context. Experimental results demonstrate that DrivingAgent achieves a superior speed–accuracy trade-off on both the nuScenes and Bench2Drive benchmarks.

02.
arXiv (CS.LG) 2026-06-17

Diagnosing and Repairing Shape-Prior Shortcuts in Long-Range Single-Shot Fringe Projection Profilometry

arXiv:2606.17093v1 Announce Type: new Abstract: Learning-based single-shot fringe projection profilometry (FPP) has been studied mostly at close range. The long-range regime (standoff beyond 1 m) remains largely unaddressed: inverse-square intensity falloff lowers fringe signal-to-noise ratio and degrades physical ground truth, the single-shot problem is ill-posed because fringe-order information is absent from one image, and these architectures have not been studied mechanistically. We present a diagnose-repair-verify study using mechanistic interpretability (MI) and conformal uncertainty quantification (UQ) as convergent diagnostics: they agree on one physical failure locus, driving and verifying an architectural repair. On a photorealistic synthetic benchmark (15,600 fringe images, 50 objects at 1.5-2.1 m), a best UNet baseline reaches 14.54 mm object mean absolute error (MAE). Three probes (linear probing, Grad-CAM, flat-plane out-of-distribution test) converge: the baseline solves the task via object-boundary shape priors rather than fringe-phase decoding. We repair this with PhiCalNet, which outputs wrapped phase rather than depth and applies a fixed differentiable calibration layer mapping phase to depth, removing the shape-prior solution from the hypothesis space architecturally rather than by a loss penalty. A physics-informed loss that enforces the same physics as a soft penalty on a depth-regressing network yields no measurable gain, isolating the architecture as the operative factor. PhiCalNet reduces object MAE 3.3x to 4.46 mm; the residual is carried by 0.103% of pixels at the +/-pi wrap discontinuity. Pixel-wise conformal UQ confirms the diagnosis: rejecting the top 5% of object pixels by snapshot disagreement cuts PhiCalNet RMSE by 64% (20.6->7.4 mm) versus 3.5% for the baseline. MI and UQ converge on the same failure locus.

03.
arXiv (CS.LG) 2026-06-19

The Hidden Cost of Approximation in Online Mirror Descent

arXiv:2511.22283v2 Announce Type: replace Abstract: Online mirror descent (OMD) is a fundamental algorithmic paradigm that underlies many algorithms in optimization, machine learning and sequential decision-making. The OMD iterates are defined as solutions to optimization subproblems which, oftentimes, can be solved only approximately, leading to an inexact version of the algorithm. Nonetheless, existing OMD analyses typically assume an idealized error free setting, thereby limiting our understanding of performance guarantees that should be expected in practice. In this work we initiate a systematic study into inexact OMD, and uncover an intricate relation between regularizer smoothness and robustness to approximation errors. When the regularizer is uniformly smooth, we establish a tight bound on the excess regret due to errors. Then, for barrier regularizers over the simplex and its subsets, we identify a sharp separation: negative entropy requires exponentially small errors to avoid linear regret, whereas log-barrier and Tsallis regularizers remain robust even when the errors are only polynomial. Finally, we show that when the losses are stochastic and the domain is the simplex, negative entropy regains robustness-but this property does not extend to all subsets, where exponentially small errors are again necessary to avoid suboptimal regret.

04.
arXiv (math.PR) 2026-06-16

Transposition Approach to Optimal Control of McKean-Vlasov SPDEs

arXiv:2603.06245v2 Announce Type: replace Abstract: In this paper, we investigate an optimal control problem for McKean-Vlasov stochastic partial differential equations, in which the coefficients depend on the law of the state process. For systems with nonconvex control sets, we establish a Pontryagin-type stochastic maximum principle that provides necessary optimality conditions for admissible controls. The analysis is based on the classical spike variation method together with the introduction of an adjoint backward stochastic partial differential equation involving Lions derivatives with respect to probability measures. Our results extend the stochastic maximum principle for McKean-Vlasov controlled stochastic differential equations to the infinite-dimensional SPDE setting.

05.
arXiv (CS.CV) 2026-06-16

DenseControl: Instance-Level Controllable Synthesis of Dense Crowd Image

In this paper, we introduce DenseControl, a novel pipeline for generating dense crowd images. Specifically, DenseControl meticulously positions and sizes each generated instance to align precisely with the predefined coordinates and scales. Based on this, we further allow for control over the background, style, and attributes of instances. The motivation behind DenseControl stems from the observation of two main challenges in synthesizing crowd images: controlling signal embedding and maintaining topological integrity when imparting instance scale guidance. To address these, we first introduce the Isolated Object Embedding (IOE) map, a novel representation that facilitates spatial location control while mitigating the difficulties associated with learning projections for model. Secondly, we propose an Implicit Scale Embedding (ISE) strategy that seamlessly integrates with the IOE map to encode precise scale information. To further enhance the efficacy of combining ISE with the IOE map, we incorporate a Position Shortcut mechanism that enhances cross-attention to alleviate projection challenges. We evaluate DenseControl through two lenses: synthesis quality and applicability in latent applications. Experiments across different control conditions demonstrate DenseControl achieves state-of-the-art results in dense crowd image synthesis. Furthermore, we showcase applications in augmenting crowd analysis under data scarcity, transfer learning, and weather generalization scenes, to highlight the practical utility of DenseControl. The codebase will be released.

06.
arXiv (CS.LG) 2026-06-19

SSH-Net: A Deep Neural Network for Predicting Failure Time Distribution Functions under Competing Risks with Application to GPU Data

arXiv:2606.20451v1 Announce Type: cross Abstract: Competing risks are commonly observed in engineering fields and can bring challenges to time-to-event data modeling when the application scenarios are complicated. Recently, deep neural networks have received great attention for prediction with competing risks, due to their flexibility and high learning capability. However, the complexity of neural network structure brings extra difficulty in hyperparameter tuning based on different data inputs. Additionally, when an engineered system has complex physical structures with multiple hierarchical levels, treating all structural levels as a single group of inputs may fail to capture critical information. To address the issues, we propose a Structured Segmented Hazard Deep Neural Network (SSH-Net) for failure time prediction under cause-specific competing risks framework. Our approach associates neural network structure with data structures, and allows different covariate groups to impact the failure prediction through separate sub-networks. The neural network is constructed based on a cause-specific competing risks model. The SSH-Net outputs cause-specific hazard functions, and utilizes the penalized log-likelihood as the loss function. The prediction accuracy of SSH-Net is validated through simulation studies by evaluating the Brier score, the area under receiver operating characteristic curves (AUC), and the root mean square error (RMSE) of the predicted cause-specific cumulative incident function. We further demonstrate the model's ability to predict failure time distribution functions using the Titan GPU failure time data.

07.
arXiv (quant-ph) 2026-06-16

Finite-Dimensional Type I von Neumann Algebras in PyTorch: A GPU-Accelerated Framework for Random Block-Diagonal Operators

arXiv:2606.15882v1 Announce Type: cross Abstract: We present \texttt{torch\_vn\_algebra}, an open-source Python library built on PyTorch for numerical experiments with finite-dimensional Type I von Neumann algebras (direct sums of matrix algebras). The library provides: $\bullet$ a compact batched tensor representation $(B,C,k_{\max},k_{\max})$ that handles both Monte Carlo samples and multiple direct summands; $\bullet$ lazy evaluation of operators to avoid unnecessary memory allocation; $\bullet$ generation of random operators with arbitrary eigenvalue distributions (user-provided samplers) and various unitary ensembles (Haar, $\mathrm{SU}(n)$, COE, CSE, diagonal phases); $\bullet$ functional calculus via SVD (absolute value, square root, inverse, entropy) and a hybrid method for extreme eigenvalues (exact diagonalisation for $k_{\max}\le256$, otherwise power iteration); $\bullet$ three trace functionals (blunt, normalised subspace trace, and the von Neumann tracial state); $\bullet$ GPU-accelerated batched linear algebra for moderate-scale Monte Carlo studies (e.g., $2\times10^4$ samples of $100\times100$ operators). The library is validated against analytical expectations (Haar moments, trace properties). Performance benchmarks on a Tesla P100 GPU are presented and discussed. Limitations and future work are outlined. The code is open-source.

08.
arXiv (CS.LG) 2026-06-19

Flow Map Denoisers: Traversing the Distortion-Perception Plane for Inverse Problems

arXiv:2606.19802v1 Announce Type: new Abstract: Image restoration faces a fundamental tradeoff: methods that minimize error produce blurry reconstructions, while those that maximize perceptual quality yield sharp but less faithful images. Existing approaches either commit to a single operating point on this distortion perception (DP) frontier or require paired-data supervision, auxiliary models, or hyperparameter tuning of the sampler to access different points. We show that flow map models, a recent extension of flow matching for few-step sampling that learns an average field, implicitly define a one-parameter family of denoisers that continuously spans the DP frontier. The lookahead parameter t acts as a control knob between the MMSE and perceptual regimes. For Gaussian targets, we prove that varying t exactly recovers the optimal DP frontier; for natural images, we observe similar behavior empirically. Within a Plug-and-Play solver, the same mechanism extends to general inverse problems, where it controls a tradeoff between perceptual alignment and data consistency. Despite the lack of exact optimality guarantees in this setting, a single trained flow map spans the DP tradeoff, matching or exceeding specialized baselines at both extremes. Extensive experiments on CelebA ($128\times 128$) and AFHQ ($256\times 256$) across several linear and nonlinear inverse tasks validate our findings.

09.
arXiv (CS.CV) 2026-06-18

HandwritingAgent: Language-Driven Handwriting Synthesis in Scalable Vector Space

Teaching machines to emulate natural handwriting styles remains an open challenge, as it requires synthesizing stroke sequences that dynamically vary in shape, texture, pressure and script - not only across individuals, but also within a single person's handwriting. Attempts at this challenge have largely explored deep learning methods in both online and offline settings. However, these approaches are often constrained by style-specific architectural choices, heavy reliance on large datasets, high compute costs, and a lack of flexible control over writing styles through natural language. To this end, we introduce HandwritingAgent, a language-driven agent that can synthesize natural handwriting sequences directly in Scalable Vector Graphics (SVG) format with no need for style-specific training. The agent leverages a large reasoning model to geometrically analyse and autoregressively generate target handwritten glyphs as stroke sequences in a discrete grid canvas environment. Generation is conditioned on texts provided in either conversational or non-conversational mode, along with a reference handwriting-style image. Experiments on diverse handwriting tasks spanning imitation, recognition, multi-lingual handwriting synthesis, and generation of complex handwritten maths and science expressions indicate substantial improvement in performance, with HandwritingAgent matching or surpassing state-of-the-art generative handwriting models, while providing a more efficient, controllable, and generalizable synthesis method.

10.
arXiv (CS.CL) 2026-06-16

Weaving Multi-Source Evidence for Biomedical Reasoning: The BioMedHop Benchmark and BioWeave Framework

Biomedical question answering (QA) increasingly requires reasoning over interacting entities, where supporting evidence is scattered across biomedical knowledge graphs, literature documents, and web-accessible resources. However, existing biomedical QA benchmarks mainly focus on exam-style knowledge, literature comprehension, or short-range multi-hop inference, leaving source-conditioned graph reasoning and evidence topology construction underexplored. To fill this gap, we introduce BioMedHop, a multi-source graph-grounded benchmark for evaluating biomedical reasoning over structured evidence topologies. BioMedHop contains 10,045 instances across KG, document, web, and hybrid evidence settings, covering shared-neighbor matching, intersection reasoning, path-based reasoning, and counting, with option-based, open-ended, and numeric count renderings. To support this benchmark, we further propose BioWeave, a source-aware reasoning framework that retrieves biomedical KG paths, gathers supporting clues from documents and web sources, assembles them into a unified evidence graph, and verifies answers through entity-level evidence support. Comprehensive experiments show that BioWeave achieves the best overall performance among compared methods on BioMedHop, outperforming the strong hybrid baseline ToG-2 by 10.5% in the overall average. Moreover, BioWeave consistently improves different LLM backbones and enables smaller models, such as Qwen3-4B, to achieve reasoning performance comparable to GPT-4-Turbo.

11.
arXiv (CS.CV) 2026-06-18

Aerial-ground LiDAR place recognition with patch-level self-supervised learning and expanded reciprocal re-ranking

LiDAR place recognition determines one's position on a prior point cloud map. The most studied ground-level LiDAR place recognition suffers from pre-visit requirements, incomplete coverage, and limited perspectives. Using pre-acquired, full-coverage Airborne Laser Scanning (ALS) data as an aerial prior map overcomes these drawbacks, making cross-view place recognition necessary and advantageous. However, aerial-ground LiDAR place recognition faces significant challenges, including the domain gap between aerial and ground point clouds, and false positives during initial retrieval. To address these challenges, we present a novel retrieval and re-ranking framework for aerial-ground LiDAR place recognition. Based on the priors that neighboring point cloud patches share similar semantics with anchor patch, our retrieval network introduces patch-level self-supervised learning modules at multiple scales and integrates with scene-level learning to improve global feature discriminativeness between aerial and ground point clouds. Furthermore, leveraging the structured spatial distribution of ALS point clouds, we introduce an Expanded Reciprocal (ER) re-ranking algorithm to exploit neighborhood information maximally and refine each feature based on neighbor features, which are then used to update the similarity matrix for final ranking. Extensive experiments demonstrate that our retrieval network outperforms existing state-of-the-art (SOTA) methods, achieving a 9.8\% improvement in average Recall@1 and a 3.2\% improvement in average Recall@1\% on the CS-Urban-Scenes, while also showing the best performance on the CS-Campus3D dataset. Additionally, our ER re-ranking algorithm further boosts the average Recall@1 by 4.9\% on CS-Campus3D and 10.2\% on CS-Urban-Scenes without additional training.

12.
arXiv (quant-ph) 2026-06-11

PHASE: Pauli Hierarchical Assembly on Subdivided Elements for Quantum-Compatible Operator Synthesis

arXiv:2606.11478v1 Announce Type: new Abstract: Efficiently decomposing finite element stiffness matrices into the Pauli basis is challenging due to the exponential growth of Pauli strings with problem size. A naive Pauli expansion requires $\Theta(8^{\lceil \log_2 N \rceil})$ operations, where $N$ denotes the number of degrees of freedom, rendering direct decomposition infeasible for large systems. Existing approaches exploit algebraic sparsity or operator structure but do not incorporate the geometric organization intrinsic to finite element discretizations, and consequently exhibit poor scaling for stiffness matrices. To address this problem, we introduce PHASE, a hierarchical, geometry-aware Pauli decomposition algorithm that leverages recursive mesh partitioning to organize element contributions across multiple spatial scales. PHASE employs a hybrid strategy that combines full- and reduced-space Tensorized Pauli Decomposition with Fast Walsh-Hadamard Transform-based aggregation to assemble global Pauli coefficients efficiently. We show that this approach yields a dimension-dependent reduction in the exponential scaling exponent of Pauli assembly asymptotic complexity relative to existing methods, reducing the cost from $2^{2{\lceil \log_2 N \rceil}}$ to $2^{\gamma_d{\lceil \log_2 N \rceil}}$ with $\gamma_d < 2$ under standard mesh regularity and balanced partition assumptions. These results substantially improve the feasibility of quantum-compatible operator synthesis for large-scale finite element models.

13.
arXiv (quant-ph) 2026-06-15

Real-time pseudo entropy and modular-Hamiltonian correlations

arXiv:2606.14208v1 Announce Type: cross Abstract: Pseudo entropy is a complex-valued generalization of entanglement entropy defined from a reduced transition matrix. We study the pseudo entropy associated with a real-time transition matrix between an initial pure state and its unitary time evolution. For a subsystem $A$, we show that the short-time behavior of real-time pseudo entropy is governed by the correlation between the physical Hamiltonian $H$ and the modular Hamiltonian $K_A=-\log\rho_A$ of the initial reduced state, $ S_A(t,0)=S_A(0)-it \langle K_A(H-\langle H\rangle)\rangle + \mathcal{O}(t^2)$. For Hermitian dynamics, the initial imaginary response is controlled by the symmetrized covariance of $H$ and $K_A$ with an overall minus sign, while the initial real response is governed by their commutator. Thus the imaginary part of real-time pseudo entropy is not merely a branch artifact: it is a time-oriented modular response generated by the correlation between microscopic time evolution and subsystem coarse graining. We clarify the relation of this result to the known first law of pseudo entropy, derive an all-order expression in a Schmidt-diagonal model, recover thermal pseudo entropy as a special case, illustrate the covariance/commutator decomposition in a two-qubit model, and confirm the covariance response in transverse-field Ising-chain quenches, including a finite-size study of a modular susceptibility near the Ising critical region. We discuss how this amplitude-level oriented response can be related to ordinary entropy production, and also give a concrete $\mathcal{PT}$-symmetric toy-model illustration of the non-Hermitian extension.

14.
arXiv (CS.CV) 2026-06-12

Budget-Constrained Step-Level Diffusion Caching

Step-level caching accelerates diffusion models by exploiting temporal redundancy across denoising steps. Existing methods make per-step cache decisions using threshold-based heuristics, without directly optimizing for final output quality. As a result, their inference latency varies across inputs and is difficult to control at deployment. In this work, we propose BudCache, which inverts this formulation: rather than letting per-step error thresholds dictate the runtime cost, we fix the compute budget in advance and search for the cache policy that best preserves the final output. To tackle the combinatorial complexity of step selection, we combine Simulated Annealing with deterministic Hill Climbing. This offline search identifies high-quality cache policies within minutes and introduces no online search or thresholding overhead during inference. When the compute budget is very tight, we further introduce cache-aware schedule alignment, which adapts the time discretization to the selected cache policy to reduce cache-induced trajectory mismatch. Experiments on FLUX.1-dev and Wan2.1 show that BudCache achieves better generation quality than heuristic caching baselines under the same inference budgets. Code is available at https://github.com/Westlake-AGI-Lab/BudCache

15.
bioRxiv (Bioinfo) 2026-06-12

Systematic functional annotation of thousands of BAHD acyltransferases in plant genomes using Protein Language Model and phylogenomic tools

The functional annotation of plant genes lags significantly behind their genomic annotation. Closing this gap requires thorough cataloging of reported protein activities alongside predictive methods that scale beyond sequence-similarity inference. Focusing on the BAHD acyltransferase enzyme family as a model, we assembled FuncZymeDB-BAHD, a large database of 2,705 LLM-retrieved and curated enzyme-acceptor-donor activities covering 336 BAHDs from 156 plant species, a 2-to-6-fold expansion over Swiss-Prot and prior compilations. We further developed FuncPred-OG, which maps queries to orthologous groups and previously characterized enzymes in FuncZymeDB-BAHD, returning hits with high evidence provenance. FuncPred-OG enabled functional prediction of over half of BAHDs across 85 plant proteomes, of which five novel predictions were validated via in vitro assays and recent studies. For the remaining BAHDs without FuncPred-OG annotation, we developed FuncPred-AI, where logistic-regression classifiers trained on protein language model embeddings achieved high Area-Under-the-Precision-Recall-curve (AUPR) scores and correct-hit rates up to 93%. FuncPred-AI yielded >1 probable donor/acceptor annotation for 99.9% (8894/8897) of BAHDs in our pan-plant dataset. Finally, the FuncPred workflow and datasets were deployed on a web portal for broader utilization, potentially reducing experimentalist efforts for selecting candidates from days to minutes. Overall, this framework provides a generalizable template for functional annotation of entire enzyme families.

16.
arXiv (CS.CL) 2026-06-12

On Sequence-to-Sequence Models for Automated Log Parsing

Context: Log parsing is a critical standard operating procedure in software systems, enabling monitoring, anomaly detection, and failure diagnosis. However, automated log parsing remains challenging due to heterogeneous log formats, distribution shifts between training and deployment data, and the brittleness of rule-based approaches. Objectives: This study aims to systematically evaluate how sequence modelling architecture, representation choice, sequence length, and training data availability influence automated log parsing performance and computational cost. Methods: We conduct a controlled empirical study comparing four sequence modelling architectures: Transformer, Mamba state-space, monodirectional LSTM, and bidirectional LSTM models. In total, 396 models are trained across multiple dataset configurations and evaluated using relative Levenshtein edit distance with statistical significance testing. Results: Transformer achieves the lowest mean relative edit distance (0.111), followed by Mamba (0.145), mono-LSTM (0.186), and bi-LSTM (0.265), where lower values are better. Mamba provides competitive accuracy with substantially lower computational cost. Character-level tokenization generally improves performance, sequence length has negligible practical impact on Transformer accuracy, and both Mamba and Transformer demonstrate stronger sample efficiency than recurrent models. Conclusion: Overall, Transformers reduce parsing error by 23.4%, while Mamba is a strong alternative under data or compute constraints. These results also clarify the roles of representation choice, sequence length, and sample efficiency, providing practical guidance for researchers and practitioners.

17.
arXiv (CS.LG) 2026-06-12

Quantizing Time-Series Models As Dynamical Systems: Trajectory-Based Quantization Sensitivity Score

arXiv:2606.13300v1 Announce Type: new Abstract: We introduce the Trajectory-based Quantization Sensitivity Score (TQS), a metric that reframes post-training quantization (PTQ) through the lens of dynamical-systems stability. By modeling the network's rollout as a discrete-time dynamical system, TQS characterizes how quantization-induced errors propagate and amplify over the rollout horizon. Unlike conventional PTQ methods, where sensitivity analysis is often coupled to the quantization procedure, TQS enables a priori sensitivity estimation decoupled from quantizer selection and bit-width assignment. This separation allows for quantization budget planning even for black-box or compiled networks with fused operators. Building on this, we present TQS-PTQ, a flexible mixed-precision framework that requires no calibration data or costly second-order approximations. Our experiments show that a dynamical-systems perspective provides a robust, high-performing pathway for low-precision deployment in resource-constrained settings.

18.
arXiv (CS.CL) 2026-06-19

Think Again or Think Longer? Selective Verification for Budget-Aware Reasoning

Test-time reasoning is increasingly used as a serving-time control knob, but extra reasoning is not uniformly valuable: it can repair failed attempts, waste compute on already-correct answers, or introduce harmful answer changes. We study this as a deployment allocation problem rather than a new-verifier problem. We introduce \sevra, Selective Verification for Reasoning Allocation, a serving-layer controller that decides whether to preserve a frozen solver's initial answer or invoke active verification. Using a frozen Qwen3-4B solver, we log intervention outcomes and train recoverability-aware gates from serving-visible attempt state. On \mathfive, selective verification reaches 76.3\% accuracy, compared with 75.5\% for always verifying, while reducing post-generation tokens by 26.8\% and harmful flips from 2.2\% to 1.0\%. However, an 8,192-token initial solve reaches 76.0\% accuracy with 28\% fewer total model tokens, showing that selective recovery is useful but not the best tested cost frontier. In frozen transfer to \gsm, the selective policy verifies only 3.0\% of examples, improves accuracy from 93.4\% to 94.5\%, and reduces verification tokens by 91.2\% relative to always verifying; again, a longer initial solve matches its accuracy with fewer realized tokens. On CommonsenseQA, always-on verification hurts, while Self-Consistency@5 improves accuracy at about five times the realized token cost. The resulting deployment rule is: tune the initial budget first, then use selective recovery when explicit checks, bounded retries, auditability, or regression-risk control matter.

19.
arXiv (math.PR) 2026-06-16

Uniform integrability of the distance to the nearest leaf in random trees

arXiv:2606.15339v1 Announce Type: new Abstract: We study the distance from the root to the nearest leaf, the analogous quantity for a uniformly chosen vertex, and its protection number, in size-conditioned simply generated trees. We prove a uniform exponential tail bound for each of these quantities, valid for arbitrary offspring distributions. As a consequence, these random variables are uniformly integrable of every order. This yields convergence of all moments to those of the corresponding local limit. The argument is probabilistic and unified across the three quantities.

20.
arXiv (CS.CL) 2026-06-18

UniECG: Understanding and Generating ECG in One Unified Model

Electrocardiogram (ECG) interpretation is a fundamental skill in medical education, yet students often need more than static examples to connect waveform evidence with diagnostic reasoning. This paper presents UniECG as a step toward interactive ECG education. UniECG supports two complementary learning interactions: given an ECG signal or image, it generates an evidence-based explanation; given a textual learning objective, it generates a corresponding ECG signal example for case-based learning. The model follows a two-stage design. First, it learns grounded ECG explanation from ECG signal–image–text data. Second, it introduces special ECG generation tokens and aligns their hidden representations with a pretrained text-conditioned ECG diffusion model, enabling controllable signal-level ECG generation. We evaluate UniECG through grounded ECG explanation and generation-oriented qualitative analysis, examining its potential to support explanation and case-based learning. UniECG is intended as an educational aid and a research step toward interactive AI-assisted ECG learning, rather than a clinically validated diagnostic system.

21.
arXiv (CS.CV) 2026-06-15

S$^2$COPE: Self-Supervised Concept Discovery via Preference Learning

Current representation learning paradigms force a fundamental compromise: self-supervised methods scale to massive datasets but yield opaque features, whereas interpretable models remain bottlenecked by the need for dense human annotation. We introduce Self-Supervised Concept discOvery via Preference lEarning (\model), a label-free framework that resolves this dilemma. Instead of treating Vision-Large-Language Models (VLLMs) as static feature extractors, \model leverages them as active participants in a self-supervised preference optimization loop. By autonomously hypothesizing, validating, and reinforcing candidate visual attributes directly from raw imagery, our framework discovers novel, structured concepts without a single label. Extensive experiments across natural, medical, and physics domains demonstrate that \model successfully extracts domain-specific concepts where standard VLLMs often fail to generate. By amortizing concept discovery directly into the VLLM backbone through our self-supervised preference objective – rather than relying on static generation and disjoint filtering – we achieve up to a 24-point absolute improvement in downstream top-1 classification accuracy on unseen data. Our work suggest that interpretability can emerge through a model's autonomous interaction with incidental visual structures, without any human supervision.

22.
arXiv (CS.CV) 2026-06-17

Blended Chart Surfaces: A Seamless Explicit Representation for Smooth Surface Fitting

A surface representation suitable for geometry processing should be compact and explicit, provide global smoothness guarantees, support a wide range of surface topologies, and offer reliable access to differential quantities such as normals and surface energies, while remaining compatible with modern differentiable optimization. Existing neural representations typically sacrifice one or more of these properties: implicit fields typically require iso-surfacing for downstream use, while explicit neural maps are constrained by canonical-domain parametrizations or exhibit seam artifacts between local charts. We introduce Blended Chart Surfaces, a compact, network-free, explicit representation that is smooth by construction and anchored to user-provided topology. Given a coarse proxy mesh encoding the intended surface topology and approximate geometry, Blended Chart Surfaces jointly optimize for a polynomial map at each proxy vertex using an off-the-shelf optimizer to fit to an implicit target shape, avoiding the need for an input parametrization. Neighboring maps are fused using a smooth 'one-ring coordinate' blending scheme, decoupling topology and coarse geometry (carried by the proxy) from geometric details (carried by the local patches). The surface is globally smooth, fully differentiable, and enables stable evaluation of derivatives, making differential quantities and surface energies directly accessible. Additionally, our construction is equivariant to rigid motions and scaling of the proxy mesh. We evaluate Blended Chart Surfaces on various topologies and geometric complexity, and compare against explicit alternatives including interpolating-function baselines and mesh-displacement MLPs. Across these, Blended Chart Surfaces achieve a favorable trade-off among compactness, simplicity, access to differential quantities, and expressivity while remaining smooth across patch boundaries.

23.
arXiv (CS.CL) 2026-06-19

Connect the Dots: Training LLMs for Long-Lifecycle Agents with Cross-Domain Generalization Via Reinforcement Learning

This work presents a general framework for training large language models (LLMs) to "Connect the Dots" (CoD), a meta-capability required by long-lifecycle agents: as an LLM-based AI agent gets deployed in an environment, it solves a long sequence of tasks while continuously exploring the environment, learning from its own experiences, and iteratively self-updating its context about the environment, thereby achieving progressively better performance on future tasks conditioned on the updated context. Major components of the CoD framework include: (1) algorithm design and infrastructure for end-to-end reinforcement learning (RL) with long rollout sequences interleaving solve-task and update-context episodes; (2) tasks and environments for incentivizing and eliciting the targeted meta-capability in LLMs during training, as well as for faithfully measuring progress during evaluation. We present proof-of-concept implementations of the CoD framework, including a GRPO-style RL algorithm with fine-grained credit assignment, as well as tasks and environments tailored to the targeted meta-capability (rather than domain-specific LLM capabilities or standard task-by-task RL). Empirical results validate the efficacy of end-to-end RL training in the CoD setting, and demonstrate the potential for out-of-distribution generalization – within the training domains, across different domains, and from CoD to Ralph-loop settings – of the elicited meta-capability. Our investigation of CoD connects several lines of prior works, and opens up new opportunities for advancing LLMs and AI agents. To facilitate further research and applications, we release our implementations at \url{https://github.com/agentscope-ai/Trinity-RFT/tree/research/cod/examples/research_cod}.

25.
arXiv (quant-ph) 2026-06-15

Quantum sensing through bosonic-fermionic Bell-state transitions in two-photon interference

arXiv:2606.14408v1 Announce Type: new Abstract: Hong-Ou-Mandel (HOM) interference has become a central resource for quantum sensing and metrology owing to its sensitivity to temporal delay and photon indistinguishability. However, existing HOM-based sensing schemes generally rely on inserting a sample into one arm of the interferometer, making the measurement vulnerable to optical loss, alignment instability, and bandwidth-dependent distortion of the interference profile. Here, we demonstrate a symmetry-controlled quantum sensing scheme based on continuous transitions between symmetric (bosonic-like) and antisymmetric (fermionic-like) Bell states in two-photon interference. By imprinting a geometric phase onto the classical pump beam and transferring it to polarization-entangled photons generated via spontaneous parametric down-conversion, we coherently tune the exchange symmetry of the entangled state without altering the temporal or spectral indistinguishability of the photons. The HOM response evolves continuously from bunching to antibunching with a sine square phase dependence, producing a coincidence modulation of approximately 10 * 10^4 counts s^-1 counts/s. In contrast to conventional HOM sensing, the phase-modulation linewidth remains fixed at pi/2, independent of photon bandwidth. Using a birefringent crystal placed directly in the pump beam, we measure thermo-dispersive birefringence with a resolution of the order of 10^{-6} over a broad temperature range. Our results establish exchange symmetry as a controllable resource for robust quantum sensing and symmetry-engineered photonic quantum information processing.