Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-11

Measurement-Free Toric-Code Memory in Array Globally Controlled Rydberg Array

arXiv:2606.12030v1 Announce Type: new Abstract: The central prerequisite of any fault-tolerant quantum architecture is a quantum memory: a block of encoded physical qubits whose logical state is actively preserved against noise across many rounds of error correction. In neutral-atom Rydberg arrays, realizing such a memory is obstructed not by the entangling gates themselves, which are already fast and high-fidelity, but by the auxiliary operations that a conventional error-correction cycle requires: mid-circuit fluorescence measurement, inter-zone atom transport, and locally focused single-qubit addressing. Each of these introduces latency, atom loss, or optical crosstalk that exceeds the cost of the underlying gates by orders of magnitude. These costs accumulate cycle after cycle, progressively degrading the very logical information the code is meant to protect. Here we propose a protocol that stabilizes a toric-code quantum memory without moving, measuring or local addressing atoms. The key is to use a three-species Rydberg atom array for the complete stabilizer cycle, including syndrome extraction, coherent correction, and ancilla reset, under global, species-selective laser pulses. Numerical simulation of a $4 \times 4$ rotated toric code shows a longer qubit lifetime when the physical error rate is below a pseudo-threshold $p^\star \approx 0.034$. The scheme offers a concrete, hardware-efficient route to topological quantum memory in neutral-atom platforms.

02.
arXiv (CS.LG) 2026-06-18

KEPLA: A Knowledge-Enhanced Deep Learning Framework for Accurate Protein-Ligand Binding Affinity Prediction

arXiv:2506.13196v5 Announce Type: replace Abstract: Accurate prediction of protein-ligand binding affinity is critical for drug discovery. While recent deep learning approaches have demonstrated promising results, they often rely solely on structural features of proteins and ligands, overlooking their valuable biochemical knowledge associated with binding affinity. To address this limitation, we propose KEPLA, a novel deep learning framework that explicitly integrates prior knowledge from Gene Ontology and ligand properties to enhance prediction performance. KEPLA takes protein sequences and ligand molecular graphs as input and optimizes two complementary objectives: (1) aligning global representations with knowledge graph relations to capture domain-specific biochemical insights, and (2) leveraging cross attention between local representations to construct fine-grained joint embeddings for prediction. Experiments on two benchmark datasets across both in-domain and cross-domain scenarios demonstrate that KEPLA consistently outperforms state-of-the-art baselines. Furthermore, interpretability analyses based on knowledge graph relations and cross attention maps provide valuable insights into the underlying predictive mechanisms.

03.
medRxiv (Medicine) 2026-06-23

Post Hoc Localization of Beam F3 Stimulation Targets: An MRI-Derived Geodesic Approach for Refined TMS E-Field Simulations

Background: Transcranial magnetic stimulation (TMS) targeting the left dorsolateral prefrontal cortex (dlPFC) is an established treatment option in major depressive disorder. One of the most common approaches for targeting the dlPFC is the Beam F3 method, which determines the stimulation site (F3Beam) as a function of external cranial measurements. Precise knowledge of the individual stimulation site is essential for imaging-based analyses of TMS effects. However, due to the method's reliance on individual anatomy, retrospective identification of F3Beam targets across cohorts is challenging, limiting the analysis of existing datasets. We developed a scalable method to reconstruct subject-specific F3Beam target locations for e-field simulations based on structural imaging. Methods: High-resolution three-dimensional (3D) T1-weighted MRI was used to generate individual scalp meshes via the ''Simulation of Non-Invasive Brain Stimulation'' (SimNIBS) software. Subject-specific anatomical distances and coordinates of interest were measured geodesically using a Python-based script to reconstruct the individual F3Beam targets. Validation included a retrospective comparison between digital geodesic measurements and manual cranial measurements in 20 patients and a prospective comparison with MR-visible scalp markers in 2 healthy controls. To assess the impact of our targeting algorithm on e-field simulations, volumetric e-field maps based on three potential targets (F3Beam, F3MNI, F3Geo) were generated in SimNIBS and compared using voxel-wise statistics in SPM12. Results: Retrospective analysis revealed a systematic bias towards higher in vivo measurements compared to digital geodesic measurements, though deviations in the final distances determining F3Beam (xBeam and yBeam) were minimal ({Delta}xBeam: 0.11 {+/-} 0.08 cm; {Delta}yBeam: 0.14 {+/-} 0.21 cm). Prospective validation demonstrated that F3Beam coordinates better matched in vivo coil positions than group-template-derived targets (F3MNI). Group-level analysis showed method-dependent clustering of coil positions with corresponding voxel-wise e-field differences. Conclusions: Individualized geodesic measurements may enable accurate, scalable and retrospective identification of Beam F3 targets and coil orientations. This approach may yield more accurate e-field simulations than group-template based targeting and provides a practical method for retrospective analysis of existing TMS treatment cohorts. This could be leveraged to identify response predictors or imaging-based biomarkers of treatment response.

04.
arXiv (CS.CL) 2026-06-15

Trusted Uncertainty in Large Language Models: A Unified Framework for Confidence Calibration and Risk-Controlled Refusal

Deployed language models must decide not only what to answer but also when not to answer. We present UniCR, a unified framework that turns heterogeneous uncertainty evidence including sequence likelihoods, self-consistency dispersion, retrieval compatibility, and tool or verifier feedback into a calibrated probability of correctness and then enforces a user-specified error budget via principled refusal. UniCR learns a lightweight calibration head with temperature scaling and proper scoring, supports API-only models through black-box features, and offers distribution-free guarantees using conformal risk control. For long-form generation, we align confidence with semantic fidelity by supervising on atomic factuality scores derived from retrieved evidence, reducing confident hallucinations while preserving coverage. Experiments on short-form QA, code generation with execution tests, and retrieval-augmented long-form QA show consistent improvements in calibration metrics, lower area under the risk-coverage curve, and higher coverage at fixed risk compared to entropy or logit thresholds, post-hoc calibrators, and end-to-end selective baselines. Analyses reveal that evidence contradiction, semantic dispersion, and tool inconsistency are the dominant drivers of abstention, yielding informative user-facing refusal messages. The result is a portable recipe of evidence fusion to calibrated probability to risk-controlled decision that improves trustworthiness without fine-tuning the base model and remains valid under distribution shift.

05.
arXiv (CS.AI) 2026-06-17

LATTEArena: An Evaluation Framework for LLM-powered Tabular Feature Engineering (Extended Version)

arXiv:2606.09004v2 Announce Type: replace Abstract: Feature engineering remains a cornerstone of tabular data analysis, and Large Language Models (LLMs) have emerged as a promising paradigm for its automation, giving rise to LLM-powered Automated Tabular Feature Engineering (LATTE). However, the field lacks standardized, cost-aware evaluation platforms, and the combinatorial explosion of design choices obscures true algorithmic progress. To bridge these gaps, we systematically deconstruct 15 representative LATTE methods into a unified 6-dimensional taxonomy. Based on this abstraction, we introduce LATTEArena, a standardized, modular, and extensible benchmarking framework that decouples monolithic pipelines into reusable execution blocks. By distilling the massive combinatorial space, we evaluate 24 core LATTE configurations across 7 research questions. Our head-to-head benchmarking goes beyond predictive accuracy to quantify token efficiency and execution robustness, yielding 17 empirical findings on cost-effectiveness trade-offs. Furthermore, we provide 3 concrete recommendations for optimal real-world deployment. By enabling controlled component-level comparisons, LATTEArena shifts the paradigm from ad-hoc prompt engineering to systematic context management. All code, datasets, and over 4,000 execution logs are publicly available to foster a dynamic, community-driven benchmark. Our framework, leaderboard, and all artifacts are hosted on the LATTEArena project website at https://goodenhak.github.io/LATTEArena.

06.
arXiv (quant-ph) 2026-06-12

Trading symmetry for Hilbert-space dimension in Bell-inequality violation

arXiv:2601.02893v3 Announce Type: replace Abstract: In quantum information, asymmetry, i.e., the lack of symmetry, is a resource allowing one to accomplish certain tasks that are otherwise impossible. Similarly, in a Bell test using any given Bell inequality, the maximum violation achievable using quantum strategies respecting or disregarding a certain symmetry can be different. In this work, we focus on the symmetry involved in the exchange of parties and explore when we have to trade this symmetry for a lower-dimensional quantum strategy in achieving the maximal violation of given Bell inequalities. For the family of symmetric Collins-Gisin-Linden-Massar-Popescu inequalities, we provide evidence showing that there is no such trade-off. However, for several other Bell inequalities with a small number of dichotomic measurement settings, we show that symmetric quantum strategies in the minimal Hilbert space dimension can only lead to a suboptimal Bell violation. In other words, there exist symmetric Bell inequalities that can only be maximally violated by asymmetric quantum strategies of minimal dimension. In contrast, one can also find examples of asymmetric Bell inequalities that are maximally violated by symmetric correlations. The implications of these findings on the geometry of the set of quantum correlations and the possibility of performing self-testing therefrom are briefly discussed.

07.
arXiv (CS.AI) 2026-06-15

UltraSketchLLM: Sub-1-Bit LLM Compression via Sketch and Hardware-Friendly Operators

arXiv:2506.17255v2 Announce Type: replace-cross Abstract: Large language models (LLMs) require larger GPU memory size these days, necessitating efficient and extreme weight compression methods. Existing compression methods are either theoretically limited by 1 bit per weight or face severe performance degradation and inefficiency. To deploy LLMs in resource-constrained scenarios, we introduce UltraSketchLLM, compressing LLMs with data sketch. It reduces peak GPU memory footprint with a high compression rate down to 0.5 bit per weight. Combined with hardware-friendly implementation, UltraSketchLLM keeps tolerable performance degradation and extremely low latency overhead with 14.9x speedup compared to naive sketch solution.

08.
arXiv (quant-ph) 2026-06-19

Recursive perturbation approach to time-convolutionless master equations: Explicit construction of generalized Lindblad generators for arbitrary open systems

arXiv:2506.04095v2 Announce Type: replace Abstract: We develop a recursive perturbative expansion for the time-convolutionless (TCL) generator of an open quantum system in a generalized Lindblad form. This formulation provides a systematic approach to derive the generator at arbitrary order while preserving a Lindblad-like structure, without imposing assumptions on the system or environment beyond an initially uncorrelated state. The generator is written, at all orders, in a canonical form, which also corresponds to the minimal dissipation condition, which uniquely specifies the decomposition of the generator into Hamiltonian and dissipative contributions. To validate the method and show its effectiveness in addressing non-Markovian dynamics and strong-coupling effects, we compute the generator explicitly up to fourth order.

09.
arXiv (CS.AI) 2026-06-18

RankGraph-2: Lifecycle Co-Design for Billion-Node Graph Learning in Recommendation

arXiv:2606.18379v1 Announce Type: cross Abstract: Graph-based retrieval at billion-node scale requires jointly solving three tightly coupled problems – graph construction, representation learning, and real-time serving – yet existing work addresses each in isolation. We present RankGraph-2, a framework deployed at Meta that co-designs all three lifecycle stages for similarity-based retrieval (U2U2I and U2I2I), where each stage's requirements shape the others. Serving requires a co-learned cluster index to avoid expensive online KNN – this pushes index co-training into the training objective. Training benefits from the observation that similarity-based retrieval tolerates pre-computed neighborhoods, eliminating online graph infrastructure – this requires construction to produce self-contained data. Construction must also support hour-level refresh for item coverage. Acting on these cascading requirements, RankGraph-2 reduces hundreds of trillions of edges to hundreds of billions via subsampling with popularity bias correction, pre-computes multi-hop neighborhoods via personalized PageRank, and co-learns a residual-quantization cluster index that reduces serving computational cost by 83%. This lifecycle co-design enables a simple architecture to achieve 3.8 x higher recall than a GAT + Deep Graph Infomax model on a bipartite graph and 2.1 x higher than PyTorch-BigGraph on item retrieval. RankGraph-2 delivers up to +0.96% CTR and +2.75% CVR, and has powered 20+ retrieval launches across major surfaces.

10.
arXiv (CS.CV) 2026-06-19

JanusMesh: Fast and Zero-Shot 3D Visual Illusion Generation via Cross-Space Denoising

Creating 3D visual illusions, a single 3D mesh that reveals entirely different semantics from various viewing angles, is a fascinating but tough challenge. Existing optimization-based methods are slow and can produce oversaturated colors. In contrast, naive stitching approaches fail to produce geometrically coherent objects. This results in visible unnatural seams and semantic leaks. In this paper, we present a fast and training-free framework for generating text-driven 3D visual illusions. Our approach decouples the generation into two stages. First, we propose a cross-space dual-branch denoising process. This process dynamically decodes 3D latents into voxel space for CLIP-guided orientation alignment and Signed Distance Field (SDF) blending, which ensures seamless geometric fusion. Second, we introduce a view-conditioned texture synthesis module that projects and aggregates view-specific 2D diffusion priors onto the fused geometry. Extensive experiments demonstrate that our method generates highly realistic, dual-semantic 3D illusions in just 3-5 minutes. It significantly outperforms existing methods in geometric integrity, semantic recognizability, and efficiency. Project page: https://siang1105.github.io/JanusMesh.github.io/

11.
arXiv (CS.AI) 2026-06-11

Diffusing to Coordinate: Efficient Online Multi-Agent Diffusion Policies

arXiv:2602.18291v2 Announce Type: replace Abstract: Online Multi-Agent Reinforcement Learning (MARL) is a prominent framework for efficient agent coordination. Crucially, enhancing policy expressiveness is pivotal for achieving superior performance. Diffusion-based generative models are well-positioned to meet this demand, having demonstrated remarkable expressiveness and multimodal representation in image generation and offline settings. Yet, their potential in online MARL remains largely under-explored. A major obstacle is that the intractable likelihoods of diffusion models impede entropy-based exploration and coordination. To tackle this challenge, we propose among the first \underline{O}nline off-policy \underline{MA}RL framework using \underline{D}iffusion policies (OMAD) to orchestrate coordination. Our key innovation is a relaxed policy objective that maximizes scaled joint entropy, facilitating effective exploration without relying on tractable likelihood. Complementing this, within the centralized training with decentralized execution (CTDE) paradigm, we employ a joint distributional value function to optimize decentralized diffusion policies. It leverages tractable entropy-augmented targets to guide the simultaneous updates of diffusion policies, thereby ensuring stable coordination. Extensive evaluations on MPE and MAMuJoCo establish our method as the new state-of-the-art across $10$ diverse tasks, demonstrating a remarkable $2.5\times$ to $5\times$ improvement in sample efficiency.

12.
PLOS Computational Biology 2026-06-05

A multiscale, Bayesian inference approach to augment mechanistic models of cell signaling with machine-learning predictions of binding affinity

by Holly A. Huber, Stacey D. Finley Computational models in systems biology are often underdetermined—that is, there is little data relative to the complexity and size of the model. This lack of data is primarily due to limits in our ability to observe specific biological systems and restricts the utility of computational models. To reduce this uncertainty, recent methods have explored augmenting parameter inference of systems biology models with predictions from machine learning models. Such approaches expand the pool of data that is applicable for the inference problem. Here, we explore augmenting the parameter inference of intracellular signaling models. We choose to investigate signaling because experimental measurements of the variables of interest, protein dynamics, are still quite limited. To investigate, we propose a novel, multiscale, Bayesian inference approach that augments traditional signaling data with predictions of binding affinity. These predictions are generated using a machine learning pipeline with measurements of amino acid sequence, from the Universal Protein Resource, or protein structure, from the Protein Data Bank, as inputs. We find that we can successfully integrate these measurements into the inference problem using our novel framework. Excitingly, this integration significantly improves the parameter estimates of signaling models. We demonstrate that how much this improvement impacts predictions of signaling depends on the sensitivity of the prediction to perturbations in the parameter values. Overall, the framework we establish here improves the parameter inference of intracellular signaling models by successfully bridging data on protein sequence and structure with systems-level signaling.

13.
arXiv (CS.LG) 2026-06-16

Bayesian Tensor Decomposition with Diffusion Model Prior

arXiv:2606.03212v2 Announce Type: replace Abstract: Low-rank tensor decomposition (TD) is usually effective on clean, fully observed data, but it often degrades under severe missingness or noise. Low-rankness is itself a useful but limited structural prior, and additional handcrafted priors (e.g., sparsity or smoothness) still fall short of capturing the rich statistics of real-world data. To compensate for this weak inductive bias under heavy corruption, one would like to inject a learned, data-driven prior; however, the state-of-the-art diffusion models are not readily compatible with current TD and tractable posterior inference. To address these challenges, we introduce DiffBCP, a hybrid-prior Bayesian CP decomposition framework that couples a cumulative shrinkage process prior over the CP factors for automatic rank selection with an off-the-shelf pre-trained diffusion model as an implicit data prior on the reconstructed tensor. To make posterior inference tractable despite the coupling among the likelihood, low-rank constraint, and diffusion prior, we develop a split Gibbs sampler: CP factors admit conjugate updates, while the diffusion block is sampled via low-rank-guided denoising. A noise-adaptive coupling schedule further reduces sensitivity to hand-tuned annealing. Experiments on image inpainting and denoising, including high-resolution out-of-distribution images, show consistent gains over Bayesian, nonlinear, and plug-and-play TD baselines.

14.
arXiv (CS.CV) 2026-06-18

Structured Spectral Graph Representation Learning for Multi-label Abnormality Analysis from 3D CT Scans

With the growing volume of CT examinations, there is an increasing demand for automated tools such as organ segmentation, abnormality detection, and report generation to support radiologists in managing their clinical workload. Multi-label classification of 3D Chest CT scans remains a critical yet challenging problem due to the complex spatial relationships inherent in volumetric data and the wide variability of abnormalities. Existing methods based on 3D convolutional neural networks struggle to capture long-range dependencies, while Vision Transformers often require extensive pre-training on large-scale, domain-specific datasets to perform competitively. In this work, we propose a 2.5D alternative by introducing a new graph-based framework that represents 3D CT volumes as structured graphs, where axial slice triplets serve as nodes processed through spectral graph convolution, enabling the model to reason over inter-slice dependencies while maintaining complexity compatible with clinical deployment. Our method, trained and evaluated on 3 datasets from independent institutions, achieves strong cross-dataset generalization, and shows competitive performance compared to state-of-the-art visual encoders. We further conduct comprehensive ablation studies to evaluate the impact of various aggregation strategies, edge-weighting schemes, and graph connectivity patterns. Additionally, we demonstrate the broader applicability of our approach through transfer experiments on automated radiology report generation and abdominal CT data.

15.
arXiv (CS.CL) 2026-06-11

Food4All: An Agentic Framework and Benchmark for Food Resource Navigation with Adaptive User Understanding

Food assistance referral requires conversational agents to translate underspecified, often noisy help-seeking dialogues into locally valid resource recommendations. We present Food4All, an agentic food-resource referral framework and benchmark grounded in 686 structured Indiana food resources. Food4All couples a food-specific search tool with 300 multi-turn evaluation tasks spanning single food needs, composite cases with access or document constraints, and five non-ideal user interaction traits: unreasonable demands, rambling responses, impatience, incomplete answers, and inconsistent information. We evaluate six Large Language Models (LLMs) on requirement grounding, resource retrieval, final referral correctness, and interaction efficiency. Although the strongest model achieves 96.33% referral accuracy, our diagnostics reveal persistent failures in grounding schedule, eligibility, intake, and document constraints, as well as failures to preserve valid retrieved resources in the final recommendation. Trait-level analysis further shows that different non-ideal behaviors stress different parts of the referral pipeline. Food4All provides a controlled testbed for studying tool-calling agents in constraint-sensitive food assistance referral under realistic user interaction challenges.

16.
arXiv (CS.CV) 2026-06-17

High-Fidelity 3D Geometric Reconstruction of Pelvic Organs from MRI: A Hybrid Deep Learning and Iterative Optimization Approach

Patient-specific 3D reconstruction of pelvic organ geometry from MRI is important for pelvic floor modeling and downstream patient-specific analysis. However, while previous studies have focused primarily on either image segmentation or downstream use of 3D models, the reconstruction of high-fidelity, high-quality geometries remains labor-intensive and poorly standardized. The study introduced a hybrid deformable shape modeling framework that integrates deep learning prediction with iterative optimization for the reconstruction of the bladder, uterus, and rectum. The framework consists of three core components: a geometry-aware multi-level deep learning architecture that preserves topological consistency of pelvic organs; a two-stage amortized optimization training strategy that balances global shape capture and local surface refinement; and a holistic synergy mechanism–where iterative optimization provides supervision for deep learning during the training phase, and during inference, deep learning rapidly predicts the global organ morphology, followed by iterative optimization to refine local surfaces and mesh quality. This framework demonstrated marked superiority in geometric fidelity than current mainstream deep learning-based organ reconstruction models. For individual anatomical structures, the reconstructed 3D geometries for the bladder, rectum, and uterus achieved significantly lower Chamfer Distance values and higher Dice Similarity Coefficient scores. In addition, while maintaining high computational efficiency, the proposed architecture yielded superior overall volumetric mesh quality. At the patient level, the framework achieved higher mean values for the 10 worst elements for both minSICN and minSIGE compared to traditional geometric post-processing algorithms.

17.
arXiv (CS.AI) 2026-06-11

The Unreasonable Effectiveness of Discrete-Time Gaussian Process Mixtures for Robot Policy Learning

arXiv:2505.03296v2 Announce Type: replace-cross Abstract: We present Mixture of Discrete-time Gaussian Processes (MiDiGap), a novel approach for flexible policy representation and imitation learning in robot manipulation. MiDiGap enables learning from as few as five demonstrations using only camera observations and generalizes across a wide range of challenging tasks. It excels at long-horizon behaviors such as making coffee, highly constrained motions such as opening doors, dynamic actions such as scooping with a spatula, and multimodal tasks such as hanging a mug. MiDiGap learns these tasks on a CPU in less than a minute and scales linearly to large datasets. We also develop a rich suite of tools for inference-time steering using evidence such as collision signals and robot kinematic constraints. This steering enables novel generalization capabilities, including obstacle avoidance and cross-embodiment policy transfer. MiDiGap achieves state-of-the-art performance on diverse few-shot manipulation benchmarks. On constrained RLBench tasks, it improves policy success by 76 percentage points and reduces trajectory cost by 67%. On multimodal tasks, it improves policy success by 48 percentage points and increases sample efficiency by a factor of 20. In cross-embodiment transfer, it more than doubles policy success. We make the code publicly available at https://midigap.cs.uni-freiburg.de.

18.
arXiv (CS.CV) 2026-06-16

Understanding Cross-Modal Contributions in Continual Vision-Language Models: A Theoretical Perspective

Continual vision-language models are commonly addressed through sequential fine-tuning; however, although this paradigm enables adaptation to new environments (tasks), it inherently emphasizes the contribution of previously learned environments (tasks) at the expense of the stability required to preserve previously acquired knowledge. While existing approaches have adequately studied continual learning and catastrophic forgetting in vision-language models (VLMs), the theoretical understanding of modality-specific contributions across a sequence of environments remains largely unexplored. In this paper, we present a new theoretical perspective to understand the cross-modal (vision-language) contributions to consecutive environments. We empirically evaluate our theoretical findings on large VLMs and demonstrate their effectiveness in capturing environment-level cross-modal contributions. Our analysis provides deeper insights into continual VLMs, highlighting their contribution robustness to varying task orders and inter-task similarities, and their improved generalization performance.

19.
arXiv (CS.CV) 2026-06-12

Fully Distributed Multi-View 3D Tracking in Real-Time

Multi-camera tracking with overlapping fields of view typically relies on centralized fusion, which creates computational bottlenecks that prevent deployment at scale. We present MV3DT, a fully distributed framework for real-time multi-view 3D tracking that achieves accurate identity propagation and occlusion recovery through peer-to-peer coordination, eliminating the need for central aggregation. Each camera node executes a lightweight modular pipeline comprising monocular 3D perception, distributed multi-view association, and collaborative fusion via lightweight messaging. MV3DT achieves 94.3% IDF1 and 93.3% MOTA on WILDTRACK, competitive with state-of-the-art centralized methods, while demonstrating superior scalability by sustaining 30 FPS on 100 cameras with less than 10 ms inter-camera latency and only 2.2% communication overhead. MV3DT operates in a zero-shot regime given camera calibrations, requiring no scene-specific learning and making it directly deployable in new environments. These results establish MV3DT as a practical solution for real-time multi-view tracking in large-scale overlapping camera networks.

20.
arXiv (quant-ph) 2026-06-16

Quantum Algorithm for Open-System Battery Cathodes by Modeling Multiple Strongly Coupled Holstein Polarons with Chain-Mapped Caldeira-Leggett Dynamics

arXiv:2606.16017v1 Announce Type: new Abstract: Cathode lithiation occupies a chemical regime of tightly localized orbitals, narrow bandwidths, and strong electron-lattice coupling. The defining electrochemical observables (open-circuit voltage and differential capacity) are open-system, reservoir-equilibration quantities that closed-Hamiltonian quantum simulation cannot produce, set by exchange with electron, Li$^+$, and phonon baths. We present a fault-tolerant quantum algorithm that recovers them through a unitary chain-mapped Caldeira-Leggett embedding, rendering the baths Trotterizable. The resulting fourth-order Trotter step has a T-gate count polynomial in system size, validating its open-system dynamics against hierarchical equations of motion (HEOM) at strong coupling and the Lindblad limit at weak coupling. For single-carrier olivine LiFePO$_4$, a single voltage anchor on an otherwise DFT-fixed Hamiltonian places the differential-capacity peak within the $\pm5$ mV reproducibility of the experimental plateau. For multi-carrier spinel LiMn$_2$O$_4$, whose $1{:}1$ Mn$^{3+}$/Mn$^{4+}$ filling makes the inter-site Coulomb repulsion dynamically active, the same kernel yields a two-plateau voltage curve with a $125$ mV split, within $17\%$ of the observed $150$ mV. We deliver an end-to-end fault-tolerant resource estimate for such a multi-carrier, three-reservoir observable: $368$ logical qubits and $\sim3\times10^5$ T-gates per step, or $\sim1.7\times10^{12}$ T-gates for a full voltage curve (parallelizable over $\sim10^3$ trajectories), leaving the production-scale dynamical run as a milestone for future hardware. The same kernel reproduces macroscopic quantum coherence, two-band superconductivity, and the Mikheyev-Smirnov-Wolfenstein resonance without modification, placing dynamical battery chemistry and similar Hamiltonians within scope for fault-tolerant quantum simulation.

21.
arXiv (CS.AI) 2026-06-16

Optimising Temporary Accommodation Placement Across London with AI-Powered SaaS in E-Governance Systems

arXiv:2606.16652v1 Announce Type: cross Abstract: Temporary accommodation has become a major fiscal and administrative pressure for English local authorities, particularly in London, where demand and costs have risen sharply. This paper documents the creation and use of DOMUS, a cloud-based, AI-enabled decision-support system built from scratch at the University of East London and customised for the needs of London Borough of Newham to support statutory Temporary accommodation placement. DOMUS integrates household case records, policy-constrained affordability and suitability rules, and live private-rental listings within a single governance-aligned workflow. The system combines transparent, rule-based filtering with large language model-assisted search to standardise the application of bedroom need, affordability thresholds, geographic preferences, and accessibility requirements, while preserving officer discretion and audibility. Household and property attributes are encoded into policy-consistent representations prior to AI-assisted ranking and explanation. A pilot deployment in Newham's secure environment evaluated operational performance relative to manual workflows. Results indicate substantial reductions in search time, improved adherence to key placement constraints, and high staff satisfaction, while maintaining statutory compliance and role-based accountability. Beyond TA, the paper frames DOMUS as replicable digital public infrastructure: a modular, cloud-native Software-as-a-Service architecture that can be deployed across other UK boroughs and adapted to other public administration tasks characterised by scarcity, rule-bound eligibility, and high stakes. The findings demonstrate the feasibility of scalable, ethically governed AI deployment in local government and contribute to debates on AI-enabled public value creation in e-governance.

22.
arXiv (quant-ph) 2026-06-16

Systematic Construction of Time-Dependent Hamiltonians for Microwave-Driven Josephson Circuits

arXiv:2512.20743v4 Announce Type: replace Abstract: Time-dependent electromagnetic drives are fundamental for controlling complex quantum systems, including superconducting Josephson circuits. In these devices, accurate time-dependent Hamiltonian models are imperative for predicting their dynamics and designing high-fidelity quantum operations. Existing numerical methods, such as black-box quantization (BBQ) and energy-participation ratio (EPR), excel at modeling the static Hamiltonians of Josephson circuits. However, these techniques do not fully capture the behavior of driven circuits stimulated by external microwave drives, nor do they include a generalized approach to account for the inevitable noise and dissipation that enter through microwave ports. Here, we introduce numerical techniques that leverage classical microwave simulations, efficiently executable in finite-element solvers, to obtain the time-dependent Hamiltonian of microwave-driven superconducting circuits with arbitrary geometries under charge, flux, or mixed electromagnetic modulation. Importantly, our techniques do not rely on a lumped-element description of the superconducting circuit, in contrast to previous approaches to tackling this problem. We demonstrate the versatility of our approach by characterizing the driven properties of realistic circuit devices in complex electromagnetic environments, including coherent dynamics due to charge and flux modulation, as well as drive-induced relaxation and dephasing. Our techniques offer a powerful toolbox for optimizing circuit designs and advancing practical applications in superconducting quantum computing.

23.
arXiv (CS.CL) 2026-06-15

CacheRL:Multi-Turn Tool-Calling Agents via Cached Rollouts and Hybrid Reward

We present CacheRL, a system for training small agent foundation models that achieves 92 percent process accuracy on multi-step tool-calling tasks, approaching GPT-5's 94 percent while requiring 100 times less compute. Our approach addresses three challenges in practical agent training: transferring tool-calling knowledge from large models at scale, enabling reinforcement learning without costly live tool execution, and learning robustly from noisy cached environments. CacheRL introduces three key innovations. First, a hybrid thinking trajectory pipeline augments agent trajectories with LLM-generated reasoning traces, producing training examples that teach models not only what tools to call but also why. Second, the CacheAgentLoop eliminates live execution costs through a three-tier fuzzy cache while preserving trajectory fidelity using token-level masking. Third, a cache-tier-aware reward dynamically adjusts answer-quality weights to avoid penalizing models for cache-induced limitations. Through iterative supervised fine-tuning (SFT) and Group Relative Policy Optimization (GRPO), CacheRL improves Qwen3-4B-Thinking's validation reward from 0.43 to 0.78. On public agentic tool-calling benchmarks, our model achieves competitive performance against frontier models such as GPT-5. Ablation studies show that removing knowledge transfer reduces performance by 41 percent, while cache-aware rewards contribute a 17 percent improvement. Interestingly, reinforcement learning improves training stability but yields limited gains beyond strong supervised fine-tuning, suggesting that data quality and reward design play a more important role than complex optimization methods in building practical small agent models.

24.
arXiv (quant-ph) 2026-06-17

Engineering entanglement and transport in interacting quantum walks with tailored potentials

arXiv:2606.17825v1 Announce Type: new Abstract: Controlling the interplay between particle propagation and quantum correlation generation is a central challenge in quantum transport. Here, we investigate two distinguishable continuous-time quantum walkers evolving on parallel one-dimensional lattices, interacting via distance-dependent potentials. While on-site interactions reproduce the typical bosonic behaviour, extending the interaction to a linear potential over multiple neighbors introduces controlled Bloch-like oscillations and shifts the bound-pair regime to stronger couplings. More generally, we explore a Coulomb-like interaction parameterized by strength, spatial scaling, and decay rate. This reveals a rich phase diagram including four distinct dynamical regimes: (i) a high-entropy, oscillatory regime akin to a linear potential; (ii) a strongly localized, bound-pair regime; (iii) a novel intermediate regime combining near-ballistic spreading with strong correlations; and (iv) a weakly interacting, free-propagation regime. Notably, regime (iii) achieves concurrent optimization of transport efficiency and entanglement, offering a sweet spot for correlated quantum dynamics. Our results provide a tool for designing interaction-engineered quantum walks with potential applications in quantum information processing and simulations.

25.
arXiv (CS.CV) 2026-06-16

Variational Test-time Optimization for Diffusion Synchronization

Collaborative generation, which coordinates multiple diffusion trajectories to extend the capabilities of pretrained priors, has emerged as a powerful paradigm for extending the applicability of diffusion models. Among existing approaches, diffusion synchronization provides a scenario-agnostic solution by introducing general guidance mechanisms. However, current synchronization approaches rely heavily on heuristics and still require task-specific tailoring, which limits their generalizability and performance. In this work, we mathematically derive a synchronization framework based on optimal control, providing a principled explanation of diffusion synchronization. During sampling, we optimize control variables to guide multiple trajectories toward coherent solutions while remaining close to the underlying diffusion prior. Our method operates entirely at test-time without additional training, thereby enabling broad applicability across diverse generation scenarios when combined with strong pretrained priors. We demonstrate consistent improvements over baselines on three representative collaborative generation tasks, covering a wide range of modalities and applications. Beyond performance gains, our work establishes a novel foundation for collaborative generation, opening a principled path toward extending pretrained generative models to new collaborative generation settings.