Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-24

THEIA: Learning Complete Kleene Three-Valued Logic in a Pure-Neural Modular Architecture

arXiv:2604.11284v5 Announce Type: replace-cross Abstract: We present THEIA, a 2.75M-parameter modular neural architecture that learns the complete Kleene three-valued logic (K3) truth table from task data without external symbolic inference or hand-encoded K3 gate primitives. Across 5 seeds it passes all 39 K3 rules at >99% per-rule accuracy. K3 learnability is not the central finding: Transformer baselines also pass all 39 rules, and flat MLPs match THEIA on Phase-1 accuracy within 0.04pp. The contributions are two properties of the learned system. (1) Uncertainty-verdict asymmetric propagation. THEIA preserves Has-Unknown at every upstream boundary (80.0/91.1/90.8/99.7% across Arith/Order/Set/Logic vs. ~52% majority) while final-verdict decodability stays at or below a 73.4% U-vs-non-U oracle reference under linear and nonlinear probes. Activation patching on non-absorbent T->U cases flips 4,898/4,898 OR and 4,719/4,719 AND pairs across 5 seeds, ruling out residual shortcuts. (2) Reliability spectrum under discretized end-to-end training, on tasks decomposable along the engine boundaries. A mod-3 sequential composition task generalizes from 5- to 500-step evaluation at 99.96+-0.04% (5 seeds). Under identical Gumbel-softmax training, flat MLPs collapse to chance by 50 steps; a 2x2 ResMLP grid reaches >=99% on only 3/20 (config, seed) trials; a pre-LN Transformer reaches 99.24+-0.34%. Straight-through discretization prevents 0.999^500 compounding; the architectural separator is sustaining Phase-1 accuracy under Phase-3 training, where flat MLPs fail. Auxiliary: under per-architecture development defaults (not optimizer-controlled), THEIA reaches 12/12 Kleene coverage 6.5x faster than a parameter-comparable 8L Transformer; this narrows to ~3.6x with Transformer-standard tuning and 4.93x with the same recipe on both. Ratios are config-specific, not asymptotic.

02.
arXiv (CS.CL) 2026-06-11

Short Chains, Deep Thoughts: Balancing Reasoning Efficiency and Intra-Segment Capability via Split-Merge Optimization

While Large Reasoning Models (LRMs) have demonstrated impressive capabilities in solving complex tasks through the generation of long reasoning chains, this reliance on verbose generation results in significant latency and computational overhead. To address these challenges, we propose CoSMo (Consistency-Guided Split-Merge Optimization), a framework designed to eliminate structural redundancy rather than indiscriminately restricting token volume. Specifically, CoSMo utilizes a split-merge algorithm that dynamically refines reasoning chains by merging redundant segments and splitting logical gaps to ensure coherence. We then employ structure-aligned reinforcement learning with a novel segment-level budget to supervise the model in maintaining efficient reasoning structures throughout training. Extensive experiments across multiple benchmarks and backbones demonstrate that CoSMo achieves superior performance, improving accuracy by 3.3 points while reducing segment usage by 28.7\% on average compared to reasoning efficiency baselines.

03.
arXiv (CS.AI) 2026-06-17

FllumaOne: A Code-Native Multimodal CAD Dataset with Executable Programs and Kernel-Validated Feature Histories

作者:

arXiv:2606.17696v1 Announce Type: new Abstract: Parametric computer-aided design records both final geometry and the ordered construction history that determines how a part can be edited. Datasets for editable CAD research should therefore expose modeling operations, parameters, and feature dependencies together with validated geometry. We introduce FllumaOne, a code-native multimodal CAD dataset whose models are generated by executable Python programs in Flluma, a Qt/C++ OpenCASCADE-based CAD system. Each sample aligns its program with a structured feature tree, a training-oriented intermediate representation, STEP geometry, a surface point cloud, natural-language descriptions, metadata, and eight canonical visible-edge renderings. The primary release, FllumaOne-100K, contains 100,000 accepted samples across four template-level complexity regimes. Programs are executed and retained only after kernel geometry, solid validity, and export checks; release reports also record modality completeness and split-level duplicate tests. A Qwen2.5-Coder-1.5B LoRA baseline trained on 80,000 samples achieves 99.98% Python syntax validity, 99.97% Flluma build success, and 99.14% STEP-export validity on the held-out 10,000-sample test split. For the 9,909 predictions converted to surface point clouds, the mean normalized Chamfer Distance is 0.002124. The dataset supports conditioned CAD reconstruction, executable program synthesis, feature-tree prediction, B-Rep analysis, retrieval, design completion, and editable reverse engineering.

04.
arXiv (CS.LG) 2026-06-17

Amortizing Maximum Inner Product Search with Learned Support Functions

arXiv:2603.08001v2 Announce Type: replace Abstract: Maximum inner product search (MIPS) is a crucial subroutine in machine learning, requiring the identification of a vector taken within a database (the keys) that best aligns with a given query. We propose amortized MIPS: a regression-based approach that trains neural networks to directly predict MIPS solutions, amortizing the cost of repeatedly solving MIPS for queries drawn from a known distribution over a fixed key database. Our key insight is that the MIPS value function is the support function of the set of keys, a well-studied convex function whose gradient yields the optimal key. This motivates two complementary amortized models: SupportNet, an input-convex neural network trained to regress the support function, and KeyNet, a vector-valued network that directly regresses the optimal key. SupportNet can serve as a cluster router, steering queries toward relevant database partitions, while KeyNet can be used as a drop-in replacement for the original query, fed directly to off-the-shelf indexing pipelines. Our experiments on the BEIR benchmark show that, for document embeddings, learned \SupportNet{}s and \KeyNet{}s significantly improve IVF match rates when accounting for compute effort, whether measured in FLOPs, number of probes, or wall-clock time. Our code is available at: https://github.com/apple/ml-amips.

05.
arXiv (CS.AI) 2026-06-16

Your Agent Has a Genome: Sequence-Level Behavioral Analysis and Runtime Governance of LLM-Powered Autonomous Agents

作者:

arXiv:2606.15579v1 Announce Type: new Abstract: We propose Base Sequence Analysis, a framework that encodes the runtime behavior of LLM-powered autonomous agents into compact symbolic sequences using a four-letter alphabet: X (Explore), E (Execute), P (Plan), and V (Verify). Drawing an analogy to genomic sequence analysis, we apply n-gram pattern mining, Markov transition matrices, and point-biserial correlation to 347 real-world execution traces collected from a production ReAct agent system over 8 days. Our analysis reveals that (1) the trigram P-X-P is the only statistically significant high-risk pattern, lowering success rate by 10.4%; (2) P-ratio is the strongest negative predictor of success (r=-0.256, pV transition probability is only 2.1%, indicating a systemic verification deficit. Based on these findings, we design Governor, a three-layer runtime intervention system comprising a rule engine, a statistical accumulator, and a chi-square-based threshold adaptor. In a natural before/after deployment evaluation (N=101 vs. N=246), Governor achieves a +6.2% absolute increase in task success rate while simultaneously reducing average token consumption by 44%. To validate cross-system generality, we apply the XEPV encoding to 2,000 public SWE-agent trajectories on SWE-bench, confirming that exploration spirals and the E->V verification deficit replicate in an independent system. We outline six research directions including base sequence language models, cross-agent behavioral fingerprinting, and reward shaping, and release an open-source toolkit for reproducibility.

06.
arXiv (CS.CL) 2026-06-17

SpeechDx: A Multi-Task Benchmark for Clinical Speech AI

Speech offers a uniquely informative window into health by simultaneously engaging neurological, motor, respiratory, and vocal systems. Current clinical speech AI methods have largely progressed through isolated condition-specific studies, making results difficult to compare and generalization difficult to assess. We introduce SpeechDx, a large-scale benchmark for clinical speech AI spanning 12 datasets and 27 tasks across diverse health conditions. To enable evaluation across shared clinical mechanisms, SpeechDx structures tasks by the stage of speech production they disrupt: conceptualization, formulation, and articulation. The benchmark tests generalization by including tasks with limited labeled data and evaluating the same health condition across multiple datasets, distinguishing clinically meaningful patterns from dataset artefacts. We systematically evaluate 12 state-of-the-art audio encoders across all tasks and under zero-shot cross-condition transfer. Results show that large-scale speech models represent the strongest overall baselines, domain-specific models improve performance only on closely matched tasks, and no current representation generalizes reliably across the clinical speech landscape. SpeechDx establishes a shared evaluation framework for tracking progress toward general-purpose clinical speech representations

07.
arXiv (CS.CV) 2026-06-15

Improving Lunar Topography with Deep Learning Schrödinger Bridges

Increasing the resolution of planetary topography models can enable a better understanding of surface processes and geomorphology; however, existing analytical super-resolution methods are expensive and difficult to apply at large scales. Generative models provide the tools to learn complex relationships within data and can be applied at scale due to hardware accelerators and parallelization. We present a diffusion-based Schrödinger Bridge (SB) generative modeling approach for lunar topography super-resolution, connecting the distribution of low-resolution topography to that of high-resolution topography, incorporating physically-constraining optical imagery. Our approach is inspired by existing Shape-from-Shading methods, which improve a priori low-resolution topography by using optical images at the target resolution. We train SBs on a novel dataset of rendered lunar topography, emulating optical imagery from the Lunar Reconnaissance Orbiter Narrow Angle Camera. The result is a flexible approach for topography super-resolution which can provide pixel-level uncertainties in the reconstruction.

08.
medRxiv (Medicine) 2026-06-15

Genome-wide colocalization of body fat distribution GWAS and subcutaneous adipose eQTLs identifies SNX10, DGKQ, and CBX3 as candidate causal genes for cardiometabolic disease

作者:

Background: Genome-wide association studies (GWAS) have identified hundreds of loci associated with body fat distribution, yet the causal genes and regulatory mechanisms through which these variants exert their effects remain largely unknown. Expression quantitative trait locus (eQTL) colocalization provides a powerful framework for identifying genes whose expression is genetically coregulated with complex traits. Methods: We performed a genome-wide colocalization analysis integrating waist-hip ratio adjusted for body mass index (WHRadjBMI) GWAS summary statistics from 694,649 individuals (Pulit et al., 2019) with subcutaneous adipose tissue eQTLs from the Genotype-Tissue Expression (GTEx) Project v8 (N = 581 donors). GWAS coordinates were lifted from GRCh37 to GRCh38 to enable direct alignment with GTEx data. We incorporated CAVIAR fine-mapping results to overcome the limitation of FDR-significant eQTL filtering. Colocalization was assessed using the approximate Bayes factor framework (coloc.abf) across 335 independent genome-wide significant loci. Results: Of 2,897 locus-gene pairs tested, 489 (16.9%) showed strong colocalization (PP.H4 > 0.8) and 618 (21.3%) showed moderate evidence (PP.H4 > 0.5). The strongest colocalization was observed for SNX10 (sorting nexin 10; PP.H4 = 1.000), a recently characterized regulator of adipocyte differentiation and female-specific diet-induced obesity. Other top hits included DGKQ (diacylglycerol kinase theta; PP.H4 = 0.9999999), an emerging pharmacological target for insulin resistance, and CBX3 (chromobox 3; PP.H4 = 0.9999974), an epigenetic regulator linked to cardiovascular disease. Established adiposity genes including GRB14 (PP.H4 = 0.681) and KLF14 (PP.H4 = 0.590) were recovered, validating our approach. Several loci exhibited extensive allelic heterogeneity, with 50 genes colocalizing at a single chromosome 3 locus. Conclusions: Our analysis provides a comprehensive map of adipose tissue gene regulatory mechanisms underlying genetic risk for body fat distribution. The identification of SNX10, DGKQ, and CBX3 as high-confidence candidate causal genes advances the translation of GWAS associations into mechanistic understanding and therapeutic targets for obesity-related cardiometabolic disease.

09.
arXiv (CS.LG) 2026-06-16

When Does q-error Predict Plan Regret? Three Regimes of Cardinality-Estimation Error

arXiv:2606.15600v1 Announce Type: cross Abstract: Cardinality-estimation (CE) research ranks estimators by q-error, yet it is well known that q-error is an imperfect proxy for query-plan quality. We give a measurement-driven account of when it is a good proxy and when it is not, and why. Modeling plan selection as an argmin over a piecewise-linear cost landscape, we find that plan regret (the cost of the chosen plan relative to the optimal, under true cardinalities) is governed by plan-cost geometry in a regime-dependent way. (i) For small errors, a true-point condition number kappa predicts regret and out-predicts q-error; its predictive power decays to zero as error grows, as a local linearization must. (ii) For large errors – where deployed learned estimators operate – an estimator-independent average-case sub-optimality measure ACS-infinity predicts which queries are regret-prone (Spearman rho ~ 0.54 on STATS-CEB), while q-error is nearly uninformative at the query level (rho ~ 0.05). (iii) The worst case is Haritsa's maximum sub-optimality (MSO). The three are one cost-ratio spectrum under three weightings. We prove a limit law ACS-infinity = sum_k r_k pi_k with cardinality-independent combinatorial weights, and validate every claim on STATS-CEB and JOB-light with four released estimators under pre-registered decision rules, and confirm on real PostgreSQL runtime that ACS-infinity predicts regret where q-error does not. The contribution is conceptual and empirical – an average-case companion to worst-case robust query optimization, and a characterization of when an accuracy metric tracks plan quality – rather than a new estimator. Code and the full pre-registration are public.

10.
arXiv (quant-ph) 2026-06-19

Applications of quantum annealing to magnetic dipole hyperfine structure constants: First results beyond energies for atoms

arXiv:2606.20166v1 Announce Type: new Abstract: We report the first results of the magnetic dipole hyperfine structure (HFS) constants of neutral $\mathrm{Li}$, Li-like $\mathrm{Be}$, neutral $\mathrm{Na}$, and Na-like $\mathrm{Mg}$ using a modified version of the Quantum Annealer Eigensolver (QAE) algorithm on D-Wave's quantum hardware. The results are benchmarked against relativistic configuration interaction with multiconfiguration Dirac Hartree-Fock (MCDHF) calculations using the General-purpose Relativistic Atomic Structure Package (GRASP), and simulated annealing. In our modified QAE, a zooming-and-sigma-annealing approach with a floating-point encoding scheme is adopted to estimate the ground-state eigenvalue and eigenvector of the relativistic Dirac-Coulomb Hamiltonian matrices ($H_{\mathrm{DC}}$) constructed from 11 or fewer configuration state functions (CSFs). For calculations with extended correlation orbital sets, we applied a CSF truncation scheme, retaining only CSFs (up to 12) that make significant contributions to the ground-state wavefunction. Our modified QAE precision is kept limited to three decimal places (up to 10 qubits). Hardware demonstrations on the D-Wave quantum processing unit (QPU) yielded results that were completely consistent with GRASP (at the chosen precision) in determining the magnetic dipole HFS constants, with accuracy varying across systems and $H_{\mathrm{DC}}$ matrix dimensions.

11.
arXiv (CS.CL) 2026-06-17

PARSE: Provenance-Aware Retrieval Sanitization for Professional Domain LLM Agents

作者:

Prompt injection defenses evaluated on synthetic benchmarks do not generalize to real enterprise documents, which are longer, denser, and interleave legitimate authority language with factual content. We demonstrate this gap with a real-document benchmark of 122 tasks across five professional domains (financial, legal, medical, scientific, DevOps) using actual SEC filings, Federal Register rules, PubMed abstracts, arXiv papers, and GitHub postmortems. Paraphrasing, the strongest defense on synthetic benchmarks, shows no statistically significant attack success rate reduction on real documents (p=0.500) while degrading utility from 91.8% to 82.8%. We introduce PARSE (Provenance-Aware Retrieval Sanitization), a domain-aware, fact-preserving sanitization pipeline that classifies each sentence by injection likelihood, extracts structured facts before rewriting, and verifies fact preservation via a consistency-checking loop. A directiveness gate routes 59% of real enterprise documents to a lightweight path, concentrating computational cost on high-risk documents. PARSE achieves 15.6% attack success rate – a 38% reduction versus the 25.4% baseline – at 86.9% utility, the only condition that is both statistically significant (p=0.014, adequately powered) and maintains near-baseline utility. Practitioners should evaluate defenses on domain-matched real documents, not synthetic proxies.

12.
arXiv (math.PR) 2026-06-16

Small moments of the sensitivity of polynomial threshold functions

arXiv:2606.16004v1 Announce Type: new Abstract: In the first version of Chang, Slote, Volberg, and Zhang's paper [BSA_of_PTF], the authors modify a nice recursive approach due to Kane in [Correct_exponent_for_AS] where he bounded the average sensitivity of polynomial threshold functions. In [BSA_of_PTF] Kane's argument was adopted to estimate the boolean surface area of polynomial threshold function. The bridge is a combinatorial averaging lemma considering all balanced partitions. The lemma serves as a substitute for an additive property of average sensitivity. With the lemma, one can apply a Kane-type algorithm to derive a recurrence. Solving the recurrence then gives an upper bound of $e^{C_d \sqrt{\log n}}$ for the boolean surface area. In the second version of the same paper, the authors derive a polylog upper bound for BSA of PTFs. The difference is that they use a tail estimate for the sensitivity function. With the help of a polynomial restriction lemma in [poly_restriction] they sharpen the upper bound. It is noteworthy that when applying the polynomial restriction, each coordinate is put into each part independently with equal probability. As a result, a partition does not necessarily have equal-size blocks. In other words, it may not be balanced. In this note, we first investigate the effect of different partitioning. Second, we use the recursive method in the first version to derive a polylog upper bound for $\mathbb E[s(x)^{\eta}]$ where $\eta < 1/2$. It is interesting to note the phase transition that happens at $\eta=1/2$ in both versions of the proof (but in a completely different form). Section [PhaseTr-s] treats that.

13.
arXiv (CS.LG) 2026-06-16

pFedUL: Layer-Aware Federated Unlearning for Personalized Federated Learning

arXiv:2606.16304v1 Announce Type: new Abstract: Federated unlearning (FU) enables the removal of specific data contributions from federated learning (FL) models to comply with regulations such as the General Data Protection Regulation (GDPR). However, most existing FU methods are designed for the FedAvg paradigm, where all clients share a single global model. In practice, personalized federated learning (pFL) methods such as FedPer, FedRep, Ditto, and FedBN have become widely adopted due to their superior handling of non-IID data. These methods decompose the model into shared global layers and client-specific personalized layers, fundamentally altering the semantics of unlearning, yet this setting has received little attention. We formalize FU under the pFL paradigm, identifying a tension between unlearning completeness on shared layers and personalization preservation for remaining clients. We then propose pFedUL, a layer-aware selective unlearning framework comprising three components: (1) gradient-based layer-wise contribution attribution that separately quantifies the target client's influence on shared and personalized parameters, (2) adaptive selective unlearning that applies differentiated forgetting strategies across layer types, and (3) a lightweight recalibration protocol enabling remaining clients to restore personalization with minimal overhead. We further introduce two new metrics, Personalization Preservation Score (PPS) and Cross-client Fairness Index (CFI), to evaluate pFL-specific unlearning quality. Experiments on CIFAR-10, CIFAR-100, and FEMNIST under varying non-IID settings indicate that pFedUL achieves unlearning effectiveness comparable to full retraining while maintaining an average of 97.3\% personalized accuracy for remaining clients. Compared with six state-of-the-art FU methods adapted to the pFL setting, pFedUL consistently achieves superior personalization preservation.

14.
medRxiv (Medicine) 2026-06-22

Integration of lung tissue proteomics and genome-wide association data to identify lung cancer susceptibility proteins and potential drug targets

Background: Proteins directly impact disease development and act as drug targets. Therefore, we integrated genomic and lung tissue proteomics data to identify lung cancer susceptibility proteins, elucidating genetic mechanisms and candidate drug targets. Method: We profiled the proteome and genome in non-neoplastic lung tissue from 200 lung cancer patients. Using this data, we constructed genetic models to predict abundance across the proteome in lung tissue. We applied these models to genome-wide association study (GWAS) data from 55,174 lung cancer cases and 1,294,174 controls to evaluate their associations with the risk of lung cancer, overall and by major histological subtypes. Bayesian colocalization and Mendelian randomization (MR) analyses were used to prioritize putative causal proteins, which were cross-referenced with three main drug-protein databases to identify potential therapeutic targets. Results: We identified 29 proteins associated with lung cancer risk at a false discovery rate < 5%, including 25 for overall lung cancer, two (AQP3 and IL18) specifically for adenocarcinoma, and another two (HMGN2 and HLA-DMB) for squamous cell carcinoma. Of them, genes encoding 17 proteins reside at least 2Mb away from any known GWAS risk loci, including 14 for overall lung cancer (HYI, GPX1, GMPPB, DSP, HDDC2, MTCH2, SUOX, JMJD7, PDIA3, IL16, IQGAP1, SULT1A2, ARHGAP27, and TYMP) and three for subtypes (AQP3, IL18, and HMGN2). Among the 12 proteins located within the known risk loci, EPHX2, CLDN18, PSMD5, and CYP2S1 proteins showed an association independent of the proximal GWAS-identified lead variant. Colocalization and/or MR analysis suggested 11 potential causal proteins. Five of these candidate causal proteins (DSP, CLDN18, IQGAP1, IL18 and TYMP) are targeted by nine drugs already approved by the FDA or in phase III trials. Conclusion: Our study identified novel lung cancer susceptibility proteins and potential drug targets, offering valuable insights into lung cancer biology and future translational utilities.

15.
arXiv (CS.CV) 2026-06-24

Trustworthy Image Authentication using Forensic Knowledge Graphs

Advances in generative AI have made image falsification highly realistic, demanding trustworthy authentication systems. Existing forensic detectors can target certain forgery types but lack interpretability, while vision-language models (VLMs) provide explanations but cannot exploit forensic traces for reliable detection. We propose Forensic Knowledge Graphs (FKGs), a unified framework that integrates forensic evidence extraction, structured reasoning, and human-interpretable explanation. Our FKG structure encodes forensic traces along with their causal dependencies and links to scene content. To generate accurate FKGs, we introduce a novel forensic authentication network and an Iterative Context Refinement strategy that guides VLMs to produce faithful, grounded explanations. We also present FKG-50K, a dataset of 50,000 realistic forgeries with ground-truth FKGs. Experiments demonstrate that FKG outperforms both forensic detectors and VLMs in detection, forgery identification and localization, and forensic justification.

16.
arXiv (CS.CL) 2026-06-17

Smarter edits? Post-editing with error highlights and translation suggestions

As MT quality increases, interest in enhanced post-editing features such as QE-derived error highlights is growing, yet evidence for their usefulness remains limited. In this work, we explore the usefulness of LLM-derived error highlights and correction suggestions based on automatic post-editing (APE). We conduct a study where professional translators (En-Nl) post-edit translations using APE error highlights and correction suggestions and compare productivity, quality and user experience to regular PE and PE with QE-derived highlights. While no condition yielded productivity or quality gains compared to regular PE, APE highlights were better received than QE-derived highlights, and correction suggestions improved overall user experience.

17.
arXiv (CS.CV) 2026-06-16

Learning a Sampling-Free Variational DNN Plugin from Tiny Training Sets to Refine OOD Segmentation With Uncertainty Estimation

Deep neural networks (DNNs) frequently fail to generalize to out-of-distribution (OOD) medical images because of variations in scanners and acquisition protocols. Retraining DNN models to address these distribution shifts is often impractical due to the high cost of acquiring and annotating new medical datasets. To address this, we introduce VarDeepPCA, a novel lightweight variational DNN framework designed to restore/refine degraded segmentation maps by leveraging intrinsic geometric priors. Unlike existing approaches that require target-domain data or extensive pre-training, our VarDeepPCA explicitly learns a distribution of valid anatomical geometries using only small in-distribution (ID) datasets. Theoretically, our novel variational learning framework leverages a reinterpretation of the softmax mapping to implicitly perform exact distribution modeling, thereby enabling computationally efficient, sampling-free learning and inference. This also enables VarDeepPCA to provide uncertainty estimates associated with its restored segmentation maps. We empirically validate our framework across 4 distinct clinical applications, using 14 publicly available datasets, involving segmentation of the myocardium, neuroretinal rim, prostate, and fetal head. Comparisons against 15 existing methods demonstrate that VarDeepPCA consistently restores segmentation maps produced by the existing methods on OOD data to (i) significantly improve anatomical plausibility of geometries and clinical utility of the segmentations, and (ii) significantly reduce errors, without needing any more training data than that used by existing methods.

18.
arXiv (CS.LG) 2026-06-19

Optimal Deterministic Multicalibration and Omniprediction

arXiv:2606.20557v1 Announce Type: new Abstract: A model is multicalibrated on a collection of group weights $G$ if it is calibrated – i.e. unbiased even conditional on its prediction – not just overall, but also after reweighting contexts by each $g \in G$. It is a useful property for many downstream applications and is a basic desideratum of trustworthy machine learning. Before this work, all predictors known to attain the minimax-optimal $\widetilde O(\varepsilon^{-3})$ sample complexity rate for $\varepsilon$-multicalibration were randomized, while deterministic predictors were known only with substantially worse sample complexity. Whether randomization is necessary for optimal sample complexity in multicalibration was explicitly asked by [CLNR26] and implicitly in several prior works. We resolve this open problem by giving a minimax-optimal multicalibration algorithm that outputs a deterministic predictor. We then generalize the algorithm to produce optimal deterministic predictors that satisfy outcome indistinguishability (OI) with respect to finite or finitely covered collections of tests. As an application, this also gives deterministic omnipredictors and panpredictors with optimal sample complexity, resolving open problems posed by [OKK25] and [BHHLZ25].

19.
arXiv (CS.AI) 2026-06-17

Rethinking Multimodal Fusion for Time Series: Text Modalities Need Constrained Fusion

arXiv:2603.22372v2 Announce Type: replace-cross Abstract: Recent advances in multimodal learning have motivated the integration of auxiliary modalities such as text or vision into time series (TS) forecasting. However, most existing methods provide limited gains, often improving performance only in specific datasets or relying on architecture-specific designs that limit generalization. In this paper, we show that multimodal models with naive fusion strategies (e.g., simple addition or concatenation) often underperform unimodal TS models, which we attribute to the uncontrolled integration of auxiliary modalities which may introduce irrelevant information. Motivated by this observation, we explore various constrained fusion methods designed to control such integration and find that they consistently outperform naive fusion methods. Furthermore, we propose Controlled Fusion Adapter (CFA), a simple plug-in method that enables controlled cross-modal interactions without modifying the TS backbone, integrating only relevant textual information aligned with TS dynamics. CFA employs low rank adapters to filter irrelevant textual information before fusing it into temporal representations. We conduct over 20K experiments across various datasets and TS/text models, demonstrating the effectiveness of the constrained fusion methods. Code is available at: https://github.com/seunghan96/cfa.

20.
arXiv (CS.CL) 2026-06-25

An Empirical Study of Many-Shot In-Context Learning for Machine Translation of Low-Resource Languages

In-context learning (ICL) allows large language models (LLMs) to adapt to new tasks from a few examples, making it promising for languages underrepresented in pre-training. Recent work on many-shot ICL suggests that modern LLMs can further benefit from larger ICL examples enabled by their long context windows. However, such gains depend on careful example selection, and the inference cost can be prohibitive for low-resource language communities. In this paper, we present an empirical study of many-shot ICL for machine translation from English into ten truly low-resource languages recently added to FLORES+. We analyze the effects of retrieving more informative examples, using out-of-domain data, and ordering examples by length. Our findings show that many-shot ICL becomes more effective as the number of examples increases. More importantly, we show that BM25-based retrieval substantially improves data efficiency: 50 retrieved examples roughly match 250 many-shot examples, while 250 retrieved examples perform similarly to 1,000 many-shot examples. We further show that ICL provides additional gains on top of fine-tuning.

21.
arXiv (CS.AI) 2026-06-16

AgentFairBench: Do LLM Agents Discriminate When They Act?

arXiv:2606.16723v1 Announce Type: new Abstract: Large language model (LLM) agents increasingly take actions (screening applicants, recommending credit, triaging patients), yet fairness for LLMs is still measured by grading answers. We introduce AgentFairBench, a cheap, reproducible, multi-domain benchmark for demographic disparity in the actions of LLM agents. Grounded in a companion framework, the Bias Conduction Framework (BCF, restated here), it spans three regulator-anchored domains: hiring, lending, and medical triage. Synthetic, demographic-neutral profiles are evaluated in counterfactual matched sets that vary only a name-coded race x gender signal (in the Bertrand Mullainathan tradition), under four agent scaffolds of increasing agency (direct, chain-of-thought, multi-agent deliberation, tool-augmented). A NumPy-only harness computes counterfactual flip rate, mean absolute score difference (MASD), action-rate disparity, and tool-invocation disparity, with bootstrap confidence intervals, paired tests, and false-discovery-rate control, for single-digit dollars per model. A live leaderboard with a held-out private split and a contamination canary admits external models by submission. Our pilot (864 decisions plus a test-retest replication) carries a methodological lesson: comparing a six-group score spread against a two-run noise difference overstates disparity by ~ 2.4X through statistic arity alone. Against an arity matched noise floor and an omnibus group test, claude haiku 4 5 shows no demographic effect above sampling noise (0 of 120 pairwise and 0 of 9 omnibus contrasts survive correction); a planted-bias test confirms the instrument detects disparity when present. The contribution is a sound, sensitive, adoption-ready instrument, the arity matched null methodology, and open artifacts to scale it. Code, data, and harness are released under open licenses, with an anonymized review artifact.

22.
arXiv (CS.AI) 2026-06-16

LabOSBench: Benchmarking Computer Use Agents for Scientific Instrument Control

arXiv:2606.16802v1 Announce Type: new Abstract: Current computer-use benchmarks primarily focus on software operation tasks in virtualized systems, whereas scientific instrumentation scenarios require coordinated control over complex interfaces, and feedback-driven parameter adjustment. However, directly evaluating agents on physical high-precision instruments is impractical due to high cost, safety risks, limited accessibility, and difficulty in ensuring reproducible evaluation. This motivates the need for a simulated yet realistic testbed that preserves the operational challenges of scientific instruments while enabling scalable and safe benchmarking. To this end, we introduce LabOSBench, a challenging benchmark for multimodal GUI agents built on a suite of web-based scientific-instrument simulators. Operating directly via a browser, LabOSBench avoids resource-heavy OS virtualization while supporting flexible task configuration and execution-based evaluation. Specifically, LabOSBench constructs 96 subtasks across eight instrument simulators, covering workflows from sample loading, alignment, parameter tuning, and data acquisition to result inspection. We evaluate general-purpose vision-language models, specialized GUI agent models, and advanced agentic frameworks at both subtask and end-to-end levels. Our experiments reveal that while existing agents can complete many structured GUI subtasks, they still struggle with feedback-driven operations and long-horizon workflow execution. Overall, LabOSBench provides a reproducible, low-cost testbed for advancing computer-using agents toward scientific-instrument control.

23.
arXiv (CS.CL) 2026-06-25

A Red Teaming Framework for Large Language Models: A Case Study on Faithfulness Evaluation

Large language models (LLMs) have demonstrated remarkable performance across natural language processing tasks, yet their deployment in high-stakes applications raises critical concerns regarding reliability, safety, and trustworthiness. In this paper, we present a red teaming framework that systematically uncovers vulnerabilities in LLM outputs. Our approach employs a novel multi-role architecture comprising target, attacker, and jury models. The attackers generate increasingly effective adversarial prompts while the jury rigorously evaluates response accuracy and consistency across tasks. In a case study, our strategy proved particularly effective at exposing unfaithfulness in LLM responses. Exploitative adversarial prompts increased the attack success rate by up to 7.9% in question-answering tasks, revealing weaknesses in reliability. The approach identifies how structural constraints in summarization can shape vulnerability patterns, with format limitations yielding measurable gains in faithfulness, and shows that architectural design choices typically outweigh parameter scaling in determining model safety. The framework's key strength is its adaptability across evaluation tasks, from English question-answering to Arabic summarization, enabling comprehensive comparison of model vulnerabilities. While it excels at comparing cross-model and cross-linguistic vulnerabilities, it faces challenges in fully automating adversarial prompt generation across languages. Our experiments also reveal limitations in detecting subtle forms of unfaithfulness that do not manifest as explicit factual contradictions, particularly across linguistic contexts. Overall, this architecture provides both actionable insights into current LLM vulnerabilities and a scalable methodology for ongoing safety evaluation as models evolve.

24.
arXiv (CS.CL) 2026-06-24

CORE-Bench: Fostering the Credibility of Published Research Through a Computational Reproducibility Agent Benchmark

AI agents have the potential to aid users on a variety of consequential tasks, including conducting scientific research. To spur the development of useful agents, we need benchmarks that are challenging, but more crucially, directly correspond to real-world tasks of interest. This paper introduces such a benchmark, designed to measure the accuracy of AI agents in tackling a crucial yet surprisingly challenging aspect of scientific research: computational reproducibility. This task, fundamental to the scientific process, involves reproducing the results of a study using the provided code and data. We introduce CORE-Bench (Computational Reproducibility Agent Benchmark), a benchmark consisting of 270 tasks based on 90 scientific papers across three disciplines (computer science, social science, and medicine). Tasks in CORE-Bench consist of three difficulty levels and include both language-only and vision-language tasks. We provide an evaluation system to measure the accuracy of agents in a fast and parallelizable way, saving days of evaluation time for each run compared to a sequential implementation. We evaluated two baseline agents: the general-purpose AutoGPT and a task-specific agent called CORE-Agent. We tested both variants using two underlying language models: GPT-4o and GPT-4o-mini. The best agent achieved an accuracy of 21% on the hardest task, showing the vast scope for improvement in automating routine scientific tasks. Having agents that can reproduce existing work is a necessary step towards building agents that can conduct novel research and could verify and improve the performance of other research agents. We hope that CORE-Bench can improve the state of reproducibility and spur the development of future research agents.

25.
arXiv (CS.AI) 2026-06-11

Synthetic Homes: A Multimodal Generative AI Pipeline for Residential Building Data Generation under Data Scarcity

arXiv:2509.09794v5 Announce Type: replace Abstract: Computational models have emerged as powerful tools for multi-scale energy modeling research at the building and urban scale, supporting data-driven analysis across building and urban energy systems. However, these models require large amounts of building parameter data that is often inaccessible, expensive to collect, or subject to privacy constraints. We introduce a modular, multimodal generative Artificial Intelligence (AI) framework that integrates image, tabular, and simulation-based components and produces synthetic residential building datasets from publicly available county records and images, and present an end-to-end pipeline instantiating this framework. To reduce typical Large Language Model (LLM) challenges, we evaluate our model's components using occlusion-based visual focus analysis. Our analysis demonstrates that our selected vision-language model achieves greater visual focus than a GPT-based alternative for building image processing. We also assess realism of our results against a national reference dataset, finding that our synthetic data overlaps more than 95% for three of the four selected variables. This work reduces dependence on costly or restricted data sources, lowering barriers to building-scale energy research and Machine Learning (ML)-driven urban energy modeling, and therefore enabling scalable downstream tasks such as energy modeling, retrofit analysis, and urban-scale simulation under data scarcity.