Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-18

As You Wish: Mission Planning with Formal Verification using LLMs in Precision Agriculture

arXiv:2606.18519v1 Announce Type: cross Abstract: Though robotic systems are now being commercialized and deployed in various industries, many of these systems are highly specialized and often require an advanced skill set to operate and ensure they perform as instructed. To mitigate this problem, we recently introduced a mission planner leveraging LLMs to synthesize mission plans in precision agriculture based on mission descriptions provided in natural language. While the system demonstrates impressive performance, it also suffers from the inherent ambiguities of natural language. In this paper, we extend our system to address this issue by introducing multiple feedback loops in the planning architecture that leverage linear temporal logic (LTL) to ensure the mission planning system meets the specifications formulated by the user while still using natural language. To mitigate potential bias, this is achieved by using two different commercial LLMs in charge of the specification and verification subtasks. Through extensive experiments, we highlight the strengths and limitations of integrating mission verification into a fully autonomous pipeline, particularly regarding an LLM's ability to generate valuable LTL formulas, and show how our proposed implementation addresses and solves these challenges.

02.
arXiv (CS.LG) 2026-06-16

Tight Bounds for Logistic Regression with Large Stepsize Gradient Descent in Low Dimension

arXiv:2602.12471v2 Announce Type: replace Abstract: We consider the optimization problem of minimizing the logistic loss with gradient descent to train a linear model for binary classification with separable data. With a budget of $T$ iterations, it was recently shown that an accelerated $1/T^2$ rate is possible by choosing a large stepsize $\eta = \Theta(\gamma^2 T)$ (where $\gamma$ is the dataset's margin) despite the resulting non-monotonicity of the loss. In this paper, we provide a tighter analysis of gradient descent for this problem when the data is two-dimensional: we show that GD with a sufficiently large learning rate $\eta$ finds a point with loss smaller than $\mathcal{O}(1/(\eta \gamma^2 T))$, as long as $T \geq \Omega(n/\gamma + 1/\gamma^2)$, where $n$ is the dataset size. Our improved rate comes from a tighter bound on the time $\tau$ that it takes for GD to transition from unstable (non-monotonic loss) to stable (monotonic loss), via a fine-grained analysis of the oscillatory dynamics of GD in the subspace orthogonal to the max-margin classifier. We also provide a lower bound of $\tau$ matching our upper bound up to logarithmic factors, showing that our analysis is tight.

03.
arXiv (CS.CV) 2026-06-16

MamBOA: State-Space Architecture for Video Recognition

Fine-grained action recognition demands temporal reasoning that general-purpose architectures address through different cost-accuracy tradeoffs: 3D dense operators couple computation to the input volume, while difference-based methods approximate motion through rigid, hand-crafted subtraction of uncontextualized features - each reflecting a deliberate design choice with corresponding limitations in expressiveness or flexibility. We present MamBOA, a backbone-agnostic temporal framework built upon a novel interleaved scan structure that recasts the selective state-space recurrence (S6) as a native motion synthesizer. By interleaving consecutive feature representations extracted from a pretrained backbone into a single alternating sequence, the proposed scan structurally drives the recurrence to encode both temporal observations of each position within a shared hidden state, separated by only a single decay step - rendering the inter-frame transition an intrinsic component of the state dynamics rather than an externally computed quantity. A cascade of dedicated alignment and decoding operations then distills this joint encoding into an explicit motion representation, which a dual-path pooling mechanism adaptively aggregates by balancing attention-driven selection with uniform temporal coverage. The framework interfaces seamlessly with CNN, Transformer, and Mamba backbone families, adding only ~2.1 GFLOPs per feature pair. On Diving48, MamBOA achieves 85.02% Top-1 accuracy with an image-pretrained backbone and 86.24% with a video-pretrained backbone processing the entire video in a single forward pass - demonstrating that structurally induced state-space dynamics constitute a principled and general foundation for motion modeling.

04.
arXiv (CS.CV) 2026-06-17

Heterogeneous SAR-optical fusion for near-real-time land use and land cover mapping under cloud contamination: A novel framework and global benchmark dataset

Optical remote sensing imagery is frequently degraded by cloud and cloud-shadow contamination, which limits its reliability for near-real-time land use and land cover (LULC) mapping. Although synthetic aperture radar (SAR) can provide cloud-penetrating structural information, existing SAR-optical fusion methods often assume reliable optical observations and insufficiently address the semantic uncertainty introduced by cloud contamination. To address this issue, we propose CloudLULC-Net, an end-to-end heterogeneous SAR-optical fusion framework that directly predicts LULC maps from cloud-contaminated Sentinel-2 imagery and temporally adjacent Sentinel-1 SAR observations. The proposed network incorporates optical reliability modulation to suppress unreliable optical responses, heterogeneous information adaptive aggregation to model high-order spatial-channel interactions between optical and SAR representations, and a unified semantic mapping transformer to organize fused features in a LULC-oriented latent space. A semantic anchor-guided optimization strategy is further introduced to improve the consistency of intermediate semantic representations. To support this task, we construct CloudLULC-Set, a large-scale benchmark dataset containing 40,223 curated SAR-optical-label triplets with pixel-level LULC annotations across diverse geographic regions and cloud conditions. Experimental results show that CloudLULC-Net achieves an OA of 86.60%, an F1-score of 83.29%, and an mIoU of 73.51%, outperforming representative heterogeneous reconstruction-first and end-to-end SAR-optical mapping methods. Comparisons with existing global LULC products and analyses under different cloud-cover levels further demonstrate the robustness and practical value of CloudLULC-Net for target-date LULC mapping in cloud-prone regions.The project is publicly available at: https://github.com/RSIIPAC/CloudLULC

05.
arXiv (quant-ph) 2026-06-19

All-valid-state HOBO encoding for constrained combinatorial optimization on NISQ devices

arXiv:2606.20017v1 Announce Type: new Abstract: Continued advancements in quantum computing have stimulated growing interest in translating quantum technologies into real-world applications. Consequently, the investigation of practically motivated NP-hard problems is of significant value. This study investigates the performance of a variational quantum eigensolver (VQE) in addressing the traveling salesperson problem (TSP) through noiseless simulations representative of noisy intermediate-scale quantum (NISQ) devices using higher-order binary optimization (HOBO) encodings. We construct a HOBO Hamiltonian with an efficient binary representation and propose an all-valid-state HOBO (AVS-HOBO) scheme based on cyclic mapping that eliminates one penalty term and reuses states that would otherwise be invalid. Using TSP instances of up to 20 cities, we compare the original HOBO and AVS-HOBO encodings from multiple perspectives, including the energy convergence behavior and the approximation, tour-length, and feasibility ratios. In addition to simulations, we perform computations on real quantum hardware with different device architectures, where we not only compare the performances of different chips but also investigate the effects of different error-mitigation methods on actual quantum machines. The results indicate that AVS-HOBO encoding enhances the practical reliability of VQE on NISQ devices and improves scalability for larger TSP instances, with broader applicability to constrained quantum optimization problems.

06.
arXiv (CS.CL) 2026-06-15

Beyond Rubrics: Exploration-Guided Evaluation Skills for Reward Modeling

Open-ended reward modeling requires judges that can follow subtle, domain-specific preferences when verifiable answers are unavailable. Existing rubric-based methods often address this by generating criteria online for each query, but the extra generation step can add inference overhead and produce rigid or misaligned guidance. We introduce Eval-Skill, an exploration-guided method that synthesizes reusable evaluation skills for reward modeling and reframes reward guidance as context evolution rather than parameter training or per-query rubric generation. Using only 100 cases per domain for skill evolution, Eval-Skill synthesizes reusable domain-level evaluation skills through two progressive stages, workflow generation followed by principle generation, with exploration and selection interleaved across both stages. Once generated, a skill is directly injected into the judge context. Across multiple RM benchmarks, Eval-Skill consistently improves diverse judge backbones; on RewardBench 2, it yields significant gains over vanilla judging for each main backbone (+13.44% for Qwen3-8B, and 18.51% for DeepSeek-V4-Flash). Further analyses of evolution-time scaling, generalizability, and transferability show that compact evaluation skills offer an efficient new paradigm for LLM-based evaluation. Code is available at https://github.com/xing-stellus-yue/Eval-Skill.

07.
arXiv (CS.LG) 2026-06-16

Characterizing Admissible Objective Functions for Hierarchical Clustering

arXiv:2604.23628v2 Announce Type: replace-cross Abstract: Hierarchical clustering is a fundamental task in data analysis, but classical methods have long lacked a principled objective function. Dasgupta [STOC~2016] took an important step toward addressing this gap by proposing a well-motivated objective function for cluster trees. Cohen-Addad et al. [J. ACM 2019] subsequently introduced the notion of admissibility: an objective function is admissible if, whenever the input similarity matrix admits generating trees, its minimizers are precisely those generating trees.They also gave a necessary and sufficient condition for admissibility within a family of objective functions based on aggregate intercluster similarity. We refer to this family as sum-type objective functions. However, apart from Dasgupta's original objective function, no explicit admissible objective functions in this family were provided. In this paper, we study admissible objective functions for hierarchical clustering in two directions. For sum-type objective functions, we give a complete characterization when the scaling function is a symmetric polynomial of degree at most two, and we derive sufficient conditions for degree-three polynomials. We also show that the recursive sparsest cut algorithm achieves an O$(\phi)$-approximation ratio for the admissible objective functions covered by our characterization, where $\phi$ is the approximation factor of the sparsest cut subroutine. We then introduce max-type objective functions, where cluster interaction is measured by maximum, rather than aggregate, intercluster similarity. For this class, we characterize which objective functions are admissible for arbitrary symmetric scaling functions and give a complete characterization when the scaling function is a symmetric polynomial of degree at most two.

08.
arXiv (CS.AI) 2026-06-11

Position: Stop Anthropomorphizing Intermediate Tokens as Reasoning/Thinking Traces!

arXiv:2504.09762v4 Announce Type: replace Abstract: Intermediate token generation (ITG), where a model produces output before the solution, has become a standard method to improve the performance of language models on reasoning tasks. These intermediate tokens have been called \say{reasoning traces} or even \say{thinking traces} – implicitly anthropomorphizing the traces, and implying that these traces resemble steps a human might take when solving a challenging problem, and as such can provide an interpretable window into the operation of the model's thinking process to the end user. In this position paper, we present evidence that this anthropomorphization isn't a harmless metaphor, and instead is quite dangerous – it confuses the nature of these models and how to use them effectively, and leads to questionable research. We call on the community to avoid such anthropomorphization of intermediate tokens.

10.
arXiv (CS.AI) 2026-06-15

Crypto x AI, AI x Crypto: A Survey

arXiv:2606.13892v1 Announce Type: cross Abstract: The intersection of crypto x AI is spawning papers, products, online posts, and companies. All the surrounding buzz, though, obscures what exactly has been done, what the opportunities and challenges are, and what open questions deserve attention. This survey paper asks what AI can do for blockchain-based technologies (broadly construed as "crypto") (crypto x AI), and vice versa (AI x crypto). We systematize existing work, summarize key takeaways, highlight open research questions, and offer a perspective on pervasive industry misconceptions, concluding that AI and crypto are still in the very early stages of meaningful integration.

11.
arXiv (CS.AI) 2026-06-24

Exploring the relationship between human-centric AI and firm idiosyncratic risks

arXiv:2606.24224v1 Announce Type: new Abstract: Despite the extensive discussions of human-centric AI (HCAI) in Industry 5.0, its effects on firms' idiosyncratic risks (IR) remains underexplored. This is an imperative issue for firms navigate financial risks during the current technological revolution, as IR reflects investor reactions to corporate heterogeneous AI strategies and implementations by isolating firm-level stock volatility from systematic factors. Integrating situated AI theory with social-technical systems theory, we conceptualise HCAI as a situated AI strategy that reduces AI-related ethical risks and fosters AI-Human synergies in firms' business operations, ultimately reducing IR by aligning with stakeholders' diverse expectations. Moreover, socio-technical factors, namely digitalisation, operational efficiency, executive shareholding, and CEOs with IT background, may moderate the HCAI-IR relationship. Using a multi-source panel dataset of Chinese listed firms from 2015 to 2023, we find that HCAI is associated with lower firm IR. Furthermore, digitalisation and executive shareholding strengthen this risk-reducing effect, whereas operational efficiency and CEOs with IT background surprisingly attenuate it. Our findings offer theoretical contributions and practical insights for both ethical AI governance and firm financial risk management in the AI era.

12.
arXiv (CS.LG) 2026-06-24

Prediction of Viscoelastic Droplet Impact Dynamics Using a Vision Transformer-Based Approach

arXiv:2606.23940v1 Announce Type: cross Abstract: Droplet impact on solid surfaces is a complex fluid dynamics problem with applications in spray cooling, inkjet printing, and pharmaceutical processing. Although numerical simulations are widely used to investigate these dynamics, their computational cost becomes significant when multiple parametric variations are considered. In this work, we investigate the use of a Video Vision Transformer (ViViT) architecture to predict the temporal evolution of viscoelastic droplets impacting solid surfaces using volume fraction fields obtained from the Volume of Fluid (VOF) method. In Newtonian fluids, impact dynamics are mainly characterized by the Reynolds number $Re$, representing the ratio of inertial to viscous forces, and the Weber number $We$, representing the ratio of inertial to surface tension forces. For viscoelastic fluids, additional parameters are required to account for elastic effects, namely the solvent viscosity ratio $\beta$ and the Weissenberg number $Wi$, increasing simulation complexity and cost. Instead of simulating the entire droplet dynamics, the proposed approach uses only the initial 10% to 20% of the simulation to predict the remaining evolution. Depending on the prediction configuration, this strategy reduces computational cost by approximately 80% to 90% compared to full numerical simulations. The ViViT produces physically consistent predictions across different parameters and prediction horizons, successfully capturing both spreading and bouncing regimes while preserving geometric features and structural similarity. Since volume fraction fields can also be extracted from experimental videos, the proposed framework could be extended to incorporate experimental data during training, potentially improving the physical fidelity of the predicted dynamics.

13.
arXiv (CS.CL) 2026-06-17

Security and Privacy Prompts in the Wild: What Users Ask LLMs and How LLMs Respond

Large language models (LLMs) are widely used to fulfill users' information needs; users ask LLMs about the weather, pose educational questions, and consult them for legal assistance. One particularly understudied area is digital security and privacy (S&P), where users may seek LLMs' help on how to secure their online accounts or protect their computers from cyber attacks. To the best of our knowledge, no prior study has collected or analyzed the S&P questions users ask LLMs; prior research on LLM response quality relied on expert-authored S&P misconceptions or FAQs rather than user queries. Drawing from WildChat, a dataset of 3.2M user-LLM conversations collected in the wild, our study identifies 14,727 S&P prompts and categorizes them into nine categories covering a wide range of S&P topics. From the S&P prompts, we sampled 450 and performed a thematic analysis to characterize the S&P questions users ask LLMs. Separate from the thematic analysis, we curated 270 advice-seeking S&P prompts, where users ask for recommendations, guidance, or specific S&P information. We measured LLM response quality and consistency when posing the prompt to LLMs 10 times. We found that commercial LLMs outperform open-weight models (GPT 5.5 provided "good enough" responses on 98% of prompts; Llama 4 on 47%). However, among prompts that received high-quality responses on average, commercial models sometimes produce contradictory responses across runs, risking confusing or misleading users.

14.
arXiv (quant-ph) 2026-06-19

Single-Step Phase-Engineered Pulse for Active Readout Cavity Reset in Superconducting Circuits

arXiv:2512.08393v2 Announce Type: replace Abstract: In a circuit QED architecture, we experimentally demonstrate a hardware-efficient and qubit-state-dependent Single-Step Phase-Engineered (SSPE) pulse scheme for actively depopulating a readout cavity. The protocol appends a reset segment with tailored amplitude and phase to a standard square readout pulse. Within the linear-response regime, the optimal reset amplitude scales proportionally with the readout amplitude, while the optimal reset phase remains invariant, significantly simplifying the experimental calibration procedure. Time-resolved measurements of the cavity photon number dynamics demonstrate that the SSPE scheme significantly outperforms the CLEAR protocol in terms of reset speed. Crucially, this approach enables arbitrarily fast, overshoot-free depletion of the cavity photon population, with the ultimate reset rate constrained by the finite analog bandwidth of the measurement chain. Furthermore, a comprehensive evaluation of the QND nature demonstrates that the SSPE scheme introduces no additional non-QND measurement errors. It exhibits non-QNDness comparable to both the free-decay and CLEAR protocols, with residual errors predominantly governed by state switching induced by qubit relaxation during the readout process. Thses results establish the SSPE scheme as a practical and scalable approach for achieving rapid and smooth cavity reset in superconducting quantum circuits.

15.
arXiv (quant-ph) 2026-06-12

SAT, MaxSAT, and SMT for QLDPC Distance Computation: A Large-Scale Empirical Study

arXiv:2606.12445v1 Announce Type: new Abstract: Exact distance computation for quantum LDPC (QLDPC) codes plays a central role in validating candidate fault-tolerant quantum-code constructions, yet the computational structure of this problem remains poorly understood. Despite substantial recent progress in QLDPC design, it remains unclear which algorithmic principles govern the practical scalability of exact distance computation and which classes of exact solvers are best suited to this task. To address these questions, we conduct a systematic study of SAT- and MaxSAT-based formulations for exact QLDPC distance computation across representative codes. We further compare these formulations against several established exact-distance approaches in order to better understand the algorithmic landscape of exact QLDPC distance computation. Our study challenges and refines several prevailing intuitions about exact QLDPC distance computation. First, despite the XOR-rich structure of QLDPC parity checks, practical scalability appears to be governed more by the handling of cardinality constraints and optimization bounds than by parity reasoning alone. Accordingly, XOR-aware reasoning does not provide a systematic advantage across our benchmark suite. Second, Brouwer-Zimmermann-style search, long regarded as the benchmark paradigm for exact distance computation in sparse classical codes, no longer maintains its traditional scalability advantage in the QLDPC setting. This finding challenges the expectation that techniques successful for sparse classical codes remain dominant for QLDPC codes. Third, substantial qualitative differences arise even among MaxSAT solvers themselves. Branch-and-bound MaxSAT significantly outperforms unsat-core-based MaxSAT on challenging benchmarks, demonstrating that solver architecture and optimization strategy play a decisive role in practical scalability.

17.
Nature (Science) 2026-06-10

Lignin to adipic acid in a high-yield chemical and biological redox process

Viable manufacturing pathways to produce bio-based chemicals from renewable feedstocks, such as lignin derived from plant biomass, are needed to decarbonize the chemicals manufacturing sector. Converting the recalcitrant lignin polymer to valuable bioproducts remains a longstanding challenge in biorefining, with the highest reported single-product yield from lignin currently around 20 wt% (refs. 1–4). Most existing lignin depolymerization strategies target aryl–ether bond cleavage, which can produce aromatic monomers in yields of only about 30 wt%, and still as complex mixtures with C–C-linked dimers and oligomers5,6. The recalcitrance of these C–C linkages between aromatic moieties fundamentally limits single-product yields from lignin, prompting the development of strategies to efficiently cleave these C–C bonds3,7–9. Here we show how reductive processing of lignin from poplar accesses a hydrocarbon mixture of alkyl-aromatic monomers and oligomers that is privileged for oxidative conversion to monomeric aromatic carboxylic acids, comprising mostly benzoic acid and phthalic acid isomers in up to 73 wt% monomer yields, using a Co/Mn/Br catalyst. The soil bacterium Pseudomonas putida KT2440 was engineered to convert this mixture of aromatic carboxylic acids to muconolactone, a precursor to bio-based nylons, enabling final adipic acid yields up to 26 wt% (gram adipic acid per gram lignin) with a maximum theoretical yield of 57 wt%. This pairing of reductive and oxidative steps with lignin resembles processes in petrochemical refining and shows how lignin may be converted into a single, valuable bioproduct in high yields. A chemical and biological redox process that resembles processes in petrochemical refining is used to convert lignin from poplar into a single, valuable bioproduct, adipic acid, in high yields.

18.
arXiv (CS.CV) 2026-06-15

CottonLeafVision: An Explainable and Robust Deep Learning Framework for Cotton Leaf Disease Classification

Globally, cotton is a highly economically beneficial crop, as the textile industry heavily depends on it. So, the precise identification and detection of cotton leaf disease is crucial for economic stability. The development goal of "CottonLeafVision" is to accurately classify and detect cotton leaf disease. With this goal, we have evaluated multiple pretrained Deep Convolutional Neural Networks, including DenseNet201, InceptionV3, and VGG19 on a publicly available cotton leaf disease image dataset. This image dataset includes seven classes, six disease classes, and one healthy class, collected under various field conditions reflecting real-world challenges. Among these pretrained models, with DenseNet201, we have achieved the highest classification accuracy of 98%. To enhance the model reliability and interpretability, we have implemented different techniques and methods such as Gradient-weighted Class Activation Mapping (Grad-CAM), occlusion sensitivity analysis and adversarial training to increase the noise resistance of the model. Finally, we have developed a prototype in order to utilize the model's capabilities on real life agriculture. This paper shows the deep learning model's capabilities to classify the disease in real-life cotton disease management situations.

19.
arXiv (CS.LG) 2026-06-11

A Judge-Aware Ranking Framework for Evaluating Large Language Models without Ground Truth

arXiv:2601.21817v3 Announce Type: replace-cross Abstract: Evaluating large language models (LLMs) on open-ended tasks without ground-truth labels is increasingly done via the LLM-as-a-judge paradigm. A critical but under-modeled issue is that judge LLMs differ substantially in reliability; treating all judges equally can yield biased leaderboards and misleading uncertainty estimates. More data can make evaluation more confidently wrong under misspecified aggregation. We propose a judge-aware ranking framework that extends the Bradley-Terry-Luce model by introducing judge-specific discrimination parameters, jointly estimating latent model quality and judge reliability from pairwise comparisons without reference labels. We establish identifiability up to natural normalizations and prove consistency and asymptotic normality of the maximum likelihood estimator, enabling confidence intervals for score differences and rank comparisons. Across multiple public benchmarks and a newly collected dataset, our method improves agreement with human preferences, achieves higher data efficiency than unweighted baselines, and produces calibrated uncertainty quantification for LLM rankings.

20.
arXiv (quant-ph) 2026-06-15

Dose-efficient Quantum Phase Estimation in Lossy Optical Interferometry

arXiv:2606.14254v1 Announce Type: new Abstract: Optical interferometry is a cornerstone technique for precise phase measurements across various fields. In many applications, for example, biological imaging, it often necessitates stringent limits on light intensity to prevent adverse effects on light-sensitive samples, a condition known as dose-limited regimes. Maximizing the precision per dose is therefore crucial. In quantum metrology, quantum correlations enable high precision in phase estimation while adhering to dose constraints. Nevertheless, photon loss, including absorption by a sample, substantially diminishes the benefits of quantum enhancement in interferometry. In this work, we experimentally investigate a dose-efficient approach to quantum phase estimation using sequential strategies in the presence of loss. Performance of sequential strategies with and without control is evaluated through quantum Fisher information (QFI) per dose. Experimental results show that both sequential strategies exceed the classical limit and outperform the parallel strategy using unbalanced N00N states. Notably, the control-enhanced sequential strategy attains superior QFI per dose, approaching the quantum limit. These results highlight the promise of sequential strategy for imaging and sensing in resource-constrained scenarios, marking a significant step toward practical and efficient quantum metrology in lossy environments.

21.
arXiv (CS.LG) 2026-06-19

An Information Theoretic Framework for Graph Novelty Generation via Latent Mixture Modeling

arXiv:2606.19770v1 Announce Type: new Abstract: We propose an information-theoretic framework for graph novelty generation, which aims to generate data that are distinct from existing patterns while preserving global structural consistency. Our approach embeds data into a latent space, models the latent distribution using finite mixture models, and generates novel samples by imposing explicit novelty and reliability conditions formulated in terms of description length. Specifically, novelty is enforced by requiring generated samples to be poorly explained by all existing mixture components, while reliability constrains their impact on the overall mixture structure under the Minimum Description Length (MDL) principle. We provide a theoretical analysis showing that, with appropriate threshold choices, the probabilities of misclassifying non-novel or unreliable samples converge to zero with explicit rates. Experiments on synthetic and benchmark graph datasets demonstrate that the proposed method enables principled novelty generation with quantifiable risk.

22.
arXiv (math.PR) 2026-06-18

Probabilistic representation and classical solutions of wave equations with complex polynomial nonlinearities

arXiv:2606.18919v1 Announce Type: cross Abstract: We review the probabilistic representation of solutions of wave equations with polynomial nonlinearities in spatial dimensions d=1,2,3 using stochastic branching processes. Under regularity assumptions on the initial data, we derive conditions ensuring the integrability of the corresponding Monte Carlo estimator, and the existence and smoothness of mild and classical solutions. We also present numerical results and comparisons with grid-based algorithms for the solution of nonlinear wave equations.

23.
arXiv (CS.AI) 2026-06-15

HierSVA: A Data Synthesis Pipeline, Dataset, and Benchmark for LLM-Driven Hierarchical Hardware Formal Verification

arXiv:2606.13706v1 Announce Type: cross Abstract: We present HierSVA, an integrated suite that combines a pipeline, dataset, and benchmark for LLM-driven hierarchical hardware formal verification. HierSVA-SP pairs an RTL preprocessing toolchain with an LLM-in-the-loop formal verification flow to produce reference SystemVerilog Assertions (SVA) on hierarchical RTL. Applying it to BaseJump STL yields HierSVA-DS, a dataset of 342 modules, with hierarchy metadata and depths 0–9, accompanied by a deep subset of 28 module-bug pairs with natural-language specifications and bug variants. HierSVA-B decomposes assertion quality into six metric axes: syntax correctness, assertion proof success rate, vacuity, specification faithfulness, mutation coverage, and formal core coverage. Applying HierSVA-B to twelve recent LLMs reveals three findings. First, the module-level compile rate is 67.1\%; among generated assertions in evaluable runs, 82.1\% prove non-vacuously, but the corresponding assertion sets detect only 70.2\% of eligible injected faults and cover 36.2\% of the formal core. Second, on 211 evaluable model–module entries in the deep subset, assertion sets flag buggy RTL with 0.87 recall, but 40\% of predicted-buggy outcomes are false positives on correct RTL, limiting precision to 0.60. Third, agentic mode improves S1-style provability and strength metrics, but gains plateau and oscillate. Codes and artifacts are available at \href{https://github.com/HierSVAAnon/HierSVACodeAndArtifacts}{https://github.com/HierSVAAnon/HierSVACodeAndArtifacts}. Dataset is available at \href{https://huggingface.co/datasets/AnonymousHierSVA/HierSVA}{https://huggingface.co/datasets/AnonymousHierSVA/HierSVA}.

24.
arXiv (CS.AI) 2026-06-15

Shift-Invariant Attribute Scoring for Kolmogorov-Arnold Networks via Shapley Value

arXiv:2510.01663v2 Announce Type: replace-cross Abstract: For many real-world applications, understanding feature-outcome relationships is as crucial as achieving high predictive accuracy. While traditional neural networks excel at prediction, their black-box nature obscures underlying functional relationships. Kolmogorov–Arnold Networks (KANs) address this by employing learnable spline-based activation functions on edges, enabling recovery of symbolic representations while maintaining competitive performance. However, KAN's architecture presents unique challenges for network pruning. Conventional magnitude-based methods become unreliable due to sensitivity to input coordinate shifts. We propose ShapKAN, a pruning framework using Shapley value attribution to assess node importance in a shift-invariant manner. Unlike magnitude-based approaches, ShapKAN quantifies each node's actual contribution, ensuring consistent importance rankings regardless of input parameterization. Extensive experiments on synthetic and real-world datasets demonstrate that ShapKAN preserves true node importance while enabling effective network compression. Our approach improves KAN's interpretability advantages, facilitating deployment in resource-constrained environments.

25.
arXiv (quant-ph) 2026-06-16

Preparation of Fractional Quantum Hall States on Quantum Computers

arXiv:2606.16548v1 Announce Type: new Abstract: The realization of fractional quantum Hall (FQH) states, characterized by fractional charge and intrinsic topological order, on quantum computers represents a central challenge at the interface of condensed matter physics and quantum information science. Current methods are grouped into two types: methods based on (quasi-)adiabatic evolution of complex parent Hamiltonians to yield target states, and circuit-based approaches for direct state preparation, which are confined to effectively one-dimensional systems near the thin cylinder or torus limit. We introduce a complementary scheme relying on direct quantum circuit construction, which works for arbitrary geometries. Specifically, we present a method to precisely prepare the $\nu=1/3$ Laughlin state on the sphere geometry and demonstrate that it significantly reduces the required number of two-qubit gates and circuit depth, compared to variational quantum circuit approaches. In addition, we employ optimal control techniques to design control pulses for both superconducting and Rydberg atom platforms, identifying experimentally feasible protocols for state preparation. Our results provide an efficient and hardware-relevant pathway for realizing generic FQH states on both noisy intermediate-scale and fault-tolerant quantum devices.