Academic Intelligence · Curated Daily
探索全球前沿学术脉络
AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。
Multi-entropy in heavy local quenches
arXiv:2606.12526v1 Announce Type: cross Abstract: We study the time evolution of tripartite entanglement in heavy local quenches in two-dimensional holographic conformal field theories. Our diagnostic is the genuine multi-entropy of adjacent intervals, computed from both bulk and boundary perspectives. A perturbative bulk analysis shows that the first-order small-mass perturbation around the vacuum geodesic network cancels identically at any time after the quench. In the fully back-reacted geometry, a vacuum-subtracted genuine multi-entropy arises from a mismatch between the winding selected by the trivalent geodesic network and the windings selected independently by the pairwise geodesics. In the sharp quench limit, the time dependence of genuine multi-entropy is kinematically fixed to logarithms of rational functions of time and is independent of the heavy operator dimension. The CFT calculation reproduces the same formula within the heavy-light vacuum block approximation, where the branch choice in the heavy-background uniformization map corresponds to the winding selection in the bulk. These results indicate that, in this setup, the genuine multi-entropy is controlled by global saddle selection, rather than by a local energy response or quasiparticle propagation.
Comparing Linear Probes with Mahalanobis Cosine Similarity
arXiv:2606.19603v1 Announce Type: new Abstract: Linear probes are widely used in interpretability research and often compared by cosine similarity. The Mahalanobis cosine similarity (MCS) between two directions, which reweights the inner product by test data covariance, is a natural task-aware refinement. Ying et al. (2026) report that a probe's MCS to a reference probe trained on the out-of-distribution (OOD) data near-perfectly linearly predicts the probe's OOD AUROC (R^2 = 0.98). Here, we extend this empirical finding across models, layers, and concept domains, and prove this general phenomenon in closed form: For balanced classes whose projections are Gaussian, OOD AUROC and MCS to the reference probe are linear because both are sigmoid-shaped functions of the probe's signal-to-noise ratio (SNR) on the test data. The theory also predicts when this linearity fails, which we verify empirically. MCS offers a theoretically grounded and empirically effective alternative to Euclidean cosine similarity for comparing linear probes.
Arbor: Tree Search as a Cognition Layer for Autonomous Agents
arXiv:2606.12563v1 Announce Type: new Abstract: Arbor is a multi-agent framework that introduces structured tree search as a cognition layer for autonomous agents operating in large, stateful action spaces. Prior autonomous optimization systems operate on isolated targets with stateless evaluation. Arbor instead maintains an explicit search tree of scored hypotheses that serves as the shared working memory across agents, evolving with every measurement, treating failures as diagnostic signal that reshapes subsequent exploration, and expanding as prior successes shift the bottleneck distribution. We validate Arbor on full-stack LLM inference optimization, a domain where achieving peak performance has historically required coordinated effort from engineering teams across the application, framework, compiler, kernel, and hardware stack. Arbor pairs an Orchestrator agent, which drives optimization by delegating to Domain Specialists across the inference stack, with a Critic agent that safeguards stability through root-cause analysis, introspection, and measurement validation – a checks-and-balances architecture where neither agent can unilaterally drive the system. Agent capabilities are decomposed into hard skills (domain expertise) and soft skills (coordination protocols that determine how contributions compose), enabling fully autonomous multi-day campaigns. Arbor achieves up to 193% inference throughput-latency Pareto improvement over vendor-optimized baselines, while a single agent without the harness plateaus at +33% throughput improvement and crashes irrecoverably within hours. Arbor generalizes to multiple generations of hardware platform, and run-to-run variance is within 2 percentage points demonstrating that the method is hardware-agnostic and reproducible.
Fast Adiabatic Quantum Gates via Hyperfine Intermediate States
arXiv:2606.11655v1 Announce Type: new Abstract: The appeal of adiabatic quantum computing lies in its intrinsic robustness against various technical imperfections, making it attractive for many quantum information applications. However, it faces a fundamental challenge: accelerating the adiabatic operations while preserving adiabaticity within the qubit coherence time. In this article, we propose an electromagnetically induced transparency-based adiabatic CNOT gate protocol which harnesses atomic hyperfine intermediate states (HISs) to speed up the adiabatic evolution. The HISs, naturally-existed in two-photon transitions, often need to be suppressed due to their significant decay errors. In contrast, this paper introduces a novel method that utilizes appropriately chosen HISs not only to enhance the adiabaticity in STAY pathway but also to accelerate the population transfer in TRANSFER pathway. Through pulse optimization, we achieve adiabatic gate fidelities exceeding 0.9991 within 0.3903 {\mu}s in realistic Cs atomic setups. To demonstrate the generality of protocol we further assess the impact of decays from multiple HIS and extend our model to arbitrary number of states, providing a practical route toward fast and robust adiabatic quantum gates in Rydberg-atom platforms.
TriFlow: Generating Artist-Like 3D Mesh Topology via Nearest-Vertex Vector Fields
We present TriFlow, a new generative approach for producing compact 3D meshes with artist-like triangle topology directly from input geometry conditions such as signed distance fields. Our key insight is to represent mesh topology as a nearest-vertex vector field (NVF) defined over the surface, where each point encodes its association to the nearest triangle vertex in the local barycentric frame. We train a latent flow-matching model to synthesize this field, enabling topology generation conditioned on the input geometry. To extract a coherent mesh, we cluster surface regions using the generated NVF and guide a constrained quadric error metric (QEM) mesh simplification with topology-aware optimization. This yields output meshes that closely match the input geometry while exhibiting structured, artist-like connectivity. Experiments demonstrate that TriFlow achieves stronger generalization and significantly improved topology quality compared to state-of-the-art learning-based approaches, alongside 90% lower Chamfer Distance and an 8x speedup.
Blind Recovery of Latent Domains via Unsupervised Symmetry Discovery
arXiv:2606.17782v1 Announce Type: new Abstract: Primary motivation in blind inverse problems is to recover signals of interest from corrupted observations without knowing the obfuscating mechanism. Blind deconvolution is a prominent approach when the corruption is convolutional, but it is not applicable when general linear transformations obfuscate the domain structure. In this work, we propose an unsupervised framework for recovering latent domains and signals by discovering symmetries of the data distribution. Our framework models observations as linear measurements of signals sampled from a latent random field, and optimizes a shallow group-convolutional network by imposing stationarity and locality regularization at the model output. The model learns a latent symmetry action and an appropriate filter, thereby mapping unstructured observations to a symmetry-based representation that reveals latent signals. Experiments on stochastic processes, Ising models, shuffled and bit-scrambled images, and neural recordings show that the method recovers latent domains and signals from unstructured observations, suggesting symmetry discovery as a new direction for unsupervised structure learning and blind inverse problems.
Learning universal approximations for partial differential equations with Physics-Informed Broad Learning System
arXiv:2606.19754v1 Announce Type: new Abstract: Partial differential equations (PDEs) play a central role in modeling complex physical, biological, and engineering systems. While traditional numerical solvers are robust, they often incur prohibitive computational costs due to mesh dependencies, whereas recent Physics-Informed Neural Networks (PINNs) offer a mesh-free alternative but frequently suffer from slow convergence and optimization instability. To bridge this gap, this article proposes the Physics-Informed Broad Learning System (PIBLS), a novel backpropagation-free framework that reformulates PDE solving as a direct least-squares optimization. We improved an algorithm within this framework to handle nonlinear PDEs efficiently and provide a rigorous mathematical proof establishing the universal approximation property of PIBLS for these equations. Experiments on linear and nonlinear PDEs demonstrate that PIBLS is one to three orders of magnitude faster than conventional PINNs while achieving significantly higher solution accuracy. This framework provides a computationally efficient paradigm for scientific machine learning, offering a practical, high-speed alternative for real-time simulation and design optimization tasks.
ReRAM-aware Model Finetuning addressing I-V Non-linearity and Retention Errors
arXiv:2606.17471v1 Announce Type: new Abstract: Traditional CPU, GPU, and NPU architectures are increasingly limited by the von Neumann bottleneck. While In-Memory Computing (IMC) using ReRAM crossbar arrays offers a high-density, energy-efficient alternative, its practical deployment is constrained through their non-idealities. Existing hardware-aware training frameworks often require training from scratch, which is computationally prohibitive for modern large-scale models. In this work, we propose a finetuning-based hardware-aware training algorithm that enables robust DNN deployment on ReRAM with minimal training overhead. Our approach mitigates I-V non-linearity by applying a range-shrunk sinh transformation and incorporates retention errors directly into a regularization loss during the finetuning process. We evaluate our framework across models and tasks such as image classification and question-answering (QA). Experimental results demonstrate that our method achieves similar accuracy on large-scale models like ResNet18 and DeiT-Tiny as the base model. In-case of ImageNet for MobileNetV3 families the technique has only less than 2% accuracy degradation. Further, applying the technique on the SQuAD v2 dataset results in only 1 point degradation of F-1 score.
Auditing Machine Unlearning: A Systematic Research on Whether Models Truly Forget
arXiv:2606.16110v1 Announce Type: new Abstract: Machine unlearning has been extensively studied in response to growing privacy concerns and regulatory requirements. However, auditing whether unlearning algorithms have truly erased the influence of specific data remains an open challenge. The lack of reliable and practical auditing mechanisms can lead to critical privacy risks, such as residual information leakage. This paper initiates a systematic investigation into whether existing unlearning algorithms can truly forget the designated data. We propose the first practical and general-purpose auditing framework for machine unlearning, inspired by the concept of proof of ignorance. Our framework addresses the key practicality limitations of existing methods by eliminating the need for retraining-from-scratch baselines, avoiding the training of large numbers of shadow models, and requiring no intrusive intervention in the original training process. To evaluate the effectiveness of our framework, we first conduct validation experiments to verify its soundness and completeness. We then perform comprehensive experiments across six datasets and ten representative unlearning methods. The results demonstrate that our framework reliably distinguishes between successful and failed unlearning. In particular, we observe that retraining-based and fine-tuning-based methods can achieve effective unlearning, even when the target data remain in the original dataset. In contrast, de-optimization-based methods fail to achieve true unlearning and instead degrade the model's performance. Fisher/Hessian-based methods also fail to unlearn requested data, even formal certification is provided. Moreover, we show that our framework is robust against fake unlearning attempts and generalizes well to large language models.
Confirmation that bryozoan animals were present during the Cambrian explosion
Bryozoans are marine invertebrates that live in colonies and have long been considered absent from the Cambrian explosion — a rapid evolutionary event that began around 538 million years ago. Newly discovered fossils from the Cambrian period reveal that the bryozoan phylum had already diversified by this time. Fossils of two forms of bryozoans show evidence of soft tissue still preserved inside their mineralized skeletons.
AgentRivet: an automated system for producing Rivet routines from journal publications
arXiv:2606.13535v1 Announce Type: cross Abstract: Particle physics collider experiments provide Rivet routines as part of the analysis preservation strategy for model-independent measurements. Rivet is a C++ toolkit that allow new theoretical models to be compared to the measurements, thus aiding the development and tuning of Monte Carlo event generators as well as searches for physics beyond the Standard Model. However, analysis coverage is known to be incomplete, with only 39% of measurements having documented and publicly available Rivet routines. In this article, we design and implement an automated workflow based on Large Language Models with the goal of providing the missing routines. This multi-step workflow, referred to as AgentRivet, extracts the physics analysis information from published papers and writes the missing Rivet routines, with intermediate code- and physics- reviews as part of an autonomous quality control. We report the results obtained using commercial Large Language Models, provided by OpenAI, Anthropic, and Google, for two recent measurements from the ATLAS and CMS experiments. We find that AgentRivet produces competent Rivet routines with few syntax errors. The physics fidelity of the routines is reasonable and follows the explanations given in the relevant publications. Nevertheless, physics-implementation issues do arise and are investigated using the artefacts produced by AgentRivet. The majority of physics implementation issues arise from subtle-but-ambiguous definitions in the given publication, although some models struggle to implement complex observables even when clear definitions are given.
Scribby: A Multi-Level LLM Framework for Semantic Video Analysis
As video content continues to expand across educational platforms, recorded lectures, and live-streamed entertainment, the need for efficient and structured analysis of long-form footage has increased [1]. Although many existing AI programs provide high-level video summaries based on AI-generated transcripts [2,3,4,5], these approaches are often limited to coarse overviews and lack detailed analysis of a video's structure, thematic progression, and semantic relationships, all of which are required for comprehensive video analysis. This paper proposes an LLM-based video summarization framework that balances macro-level comprehension with micro-level semantic analysis [6,12,13]. The first stage of the process indexes the video at a micro level by (1) analyzing the full transcript, (2) analyzing individual transcript sentences, and (3) grouping these sentences by semantic similarity using an LLM as a judge [6,13]. Contextual continuity is retained during sentence-level processing by incorporating both the global transcript analysis and adjacent sentence information into each evaluation prompt. This framework establishes a foundation for video analysis tools that visualize semantic chunking and semantic matching through relevance-based heatmaps. Limitations and future expansions of the framework are also discussed.
Biophysical EPR Using Superconducting Resonators
arXiv:2606.23952v1 Announce Type: new Abstract: We present innovations that enable the use of superconducting resonators for high sensitivity, high bandwidth pulsed electron paramagnetic resonance (EPR) measurements on biologically relevant samples with enhanced stability and throughput. A custom-built X-band pulsed EPR spectrometer with AWG and digital IF capability generated by an FPGA was used to control a novel patterned thin film planar superconducting microstrip resonator capable of generating Rabi fields sufficient to achieve 6 ns pi/2 Gaussian pulses using a 100 W solid-state HPA. The system allows automated sequential calibration, measurement, and analysis of five 3.5 uL samples contained in a sample cartridge. Performance was validated through measurements of double electron-electron resonance (DEER) distances in a variety of spin-labeled protein samples with biologically relevant concentrations, including measurements below 10 uM. The results enable broadening the scope of applications for both superconducting resonators and the use of EPR in biotechnology.
A Robust Strontium Tweezer Apparatus for Quantum Computing
arXiv:2601.16564v2 Announce Type: replace-cross Abstract: Neutral atoms for quantum computing applications show promise in terms of scalability and connectivity. We demonstrate the realization of a versatile apparatus capable of stochastically loading a 5x5 array of optical tweezers with single $^{88}$Sr atoms featuring flexible magnetic field control and excellent optical access. A custom-designed oven, spin-flip Zeeman slower, and deflection stage produce a controlled flux of Sr directed to the science chamber. In the science chamber, featuring a vacuum pressure of $3 \times 10^{-11}$ mbar, the Sr is cooled using two laser cooling stages, resulting in $\sim 3 \times 10^5$ atoms at a temperature of 5(1) $\mu$K. The optical tweezers feature a $1/e^2$ waist of 0.81(2) $\mu$m, and loaded atoms can be imaged with a fidelity of $\sim 0.997$ and a survival probability of $0.99^{+0.01}_{-0.02}$. The atomic array presented here forms the core of a full-stack quantum computing processor targeted for quantum chemistry computational problems.
Learning Credal Ensembles via Distributionally Robust Optimization
arXiv:2602.08470v3 Announce Type: replace Abstract: Credal predictors are models that are aware of epistemic uncertainty and produce a convex set of probabilistic predictions. They offer a principled way to quantify predictive epistemic uncertainty (EU) and have been shown to improve model robustness in various settings. However, most state-of-the-art methods mainly define EU as disagreement caused by random training initializations, which mostly reflects sensitivity to optimization randomness rather than uncertainty from deeper sources. To address this, we define EU as disagreement among models trained with varying relaxations of the i.i.d. assumption between training and test data. Based on this idea, we propose CreDRO, which learns an ensemble of plausible models through distributionally robust optimization. As a result, CreDRO captures EU not only from training randomness but also from meaningful disagreement due to potential distribution shifts between training and test data. Empirical results show that CreDRO consistently outperforms existing credal methods on tasks such as out-of-distribution detection across multiple benchmarks and selective classification in medical applications.
Cross-Layer Discrete Concept Discovery for Interpreting Language Models
Interpreting language models remains challenging due to the existence of residual stream, which linearly mixes and duplicates features across adjacent layers, causing single-layer analyses to miss this cross-layer structure. Cross-layer sparse autoencoders (SAEs) address layer mixing but operate in continuous space, where concepts split across many neurons without clear boundaries. We introduce Cross-Layer Vector Quantized-Variational Autoencoder (CLVQ-VAE), a novel framework which maps representations from a lower layer to a higher layer through a discrete vector-quantization bottleneck, collapsing duplicated residual-stream features into compact, interpretable concept vectors. Our approach combines top-k temperature-based sampling with exponential moving average (EMA) codebook updates, providing controlled exploration of the discrete latent space while maintaining codebook diversity. Across both encoder- and decoder-based models on ERASER-Movie, Jigsaw, and AGNews, CLVQ-VAE outperforms clustering, single-layer vector quantized-variational autoencoder (VQ-VAE), and sparse autoencoder (SAE) baselines across three evaluation axes: removing identified concepts drops model accuracy by up to 93%, LLM judges rank our concepts first in 66.7% of comparisons, and human annotators recover model predictions from our visualizations with 78% accuracy versus 54% for clustering.
The Algorithmic-Human Manager: AI, Apps, and Workers in the Indian Gig Economy
arXiv:2606.19975v1 Announce Type: cross Abstract: This paper examines the impact of artificial intelligence and digital technologies on the blue-collar gig economy in India, focusing on algorithmic management. This paper examines the impact of artificial intelligence and digital technologies on the blue collar gig economy in India, focusing on algorithmic management he use of automated systems to allocate, monitor, and evaluate work in location-based services such as ride sharing and delivery. Using a social justice framework and a mixed-methods approach comprising interviews with 16 gig workers and 21 key stakeholders, the study uncovers a dual reality: while AI-powered systems expand access to work and generate operational efficiencies, they simultaneously introduce significant challenges related to fairness, transparency, and worker dignity. Key findings reveal that algorithmic systems are opaque by design, produce inequitable outcomes, and are not structured to reward additional labour with proportionate pay. The study advocates for a pragmatic hybrid governance model an Algorithmic Human Manager framework in which technological efficiency and human accountability operate together rather than in opposition. The findings carry implications for policymakers, platform companies, and civil society organizations working to design equitable AI governance frameworks for the gig economy in India and across the Global South.
Code-Augur: Agentic Vulnerability Detection via Specification Inference
arXiv:2606.18619v1 Announce Type: cross Abstract: The advent of agentic vulnerability detection is already becoming a watershed moment for software security. Audits conducted entirely by autonomous LLM agents are uncovering critical vulnerabilities in fundamental software underpinning digital society. Many of these vulnerabilities remained masked for years, surfacing only now with AI agents. Yet the reasoning behind these discoveries remains alarmingly opaque and unvalidated. What assumptions did the agent make about a function's inputs when it deemed that function to be secure? Failures in reasoning and incorrect assumptions can lead to missed vulnerabilities and reduce trust in agentic analysis. We propose a security-specification-first paradigm that (1) exposes the agent's tacit assumptions explicitly as security specifications and (2) continuously refines those specifications via runtime falsification. We realize our approach in Code-Augur, a novel harness for agentic vulnerability detection. Given a codebase, Code-Augur analyzes each component of the system for vulnerable code. When it deems a component to be secure, it commits the local invariants behind that judgment as in-source assertions. In parallel, Code-Augur leverages a guided fuzzer to attempt to falsify those assumptions. When the fuzzer triggers an assertion, this either reveals a genuine vulnerability or a flawed specification to refine. In both cases, this process grounds the agent's understanding, aligning its view of code intent with how the code actually behaves. On real-world subjects, Code-Augur effectively leverages security specifications to detect more vulnerabilities than other state-of-the-art agents. Additionally, Code-Augur found 22 new vulnerabilities in key open-source projects. Compared to curated specialized models like Claude Mythos, Code-Augur offers effective agentic vulnerability detection built on widely available LLMs like Sonnet and DeepSeek.
Auditing Demographic Bias in Facial Landmark Detection for Fair Human-Robot Interaction
Fairness in human-robot interaction critically depends on the reliability of the perceptual models that enable robots to interpret human behavior. While demographic biases have been widely studied in high-level facial analysis tasks, their presence in facial landmark detection remains unexplored. In this paper, we conduct a systematic audit of demographic bias in this task, analyzing the age, gender, and race biases. To this end, we introduce a controlled statistical methodology to disentangle demographic effects from confounding visual factors. Our analysis demonstrates that visual confounders, particularly head pose and face resolution, heavily outweigh the impact of demographic attributes. Notably, after accounting for these confounders, performance disparities across gender and race vanish. However, we identify a statistically significant age-related bias, with higher localization errors for older individuals. This shows that fairness issues can emerge even in low-level vision components and can propagate through the HRI pipeline. We argue that auditing and correcting such biases is a necessary step toward trustworthy and equitable robot perception systems.
BATTLE-AMP: Benchmarking Antimicrobial Peptide Predictors
As antimicrobial resistance outpaces antibiotic development, antimicrobial peptides (AMPs) have emerged as a promising class of alternative antibacterials, and computational predictors are increasingly used to prioritize AMP candidates. Such predictors are typically evaluated on binary AMP/non-AMP classification, which does not test whether they can identify peptides with clinically relevant potency against specific pathogens. We present BATTLE-AMP, a benchmarking framework that evaluates AMP predictors against experimentally measured minimum inhibitory concentrations (MICs) across clinically relevant bacterial species and strains. We surveyed 48 published methods, finding fewer than 25% reproducible, and benchmarked 10 model families (21 variants) using experimental MIC data, synthetic sequence perturbations, activity cliff analyses, and all-atom molecular dynamics (MD) simulations. Four findings emerge: (i) models trained on MIC data outperform binary classifiers regardless of architecture; (ii) the best model depends on the target pathogen, so model selection must be guided by the biological question; (iii) most models cannot distinguish active peptides from inactive sequences with identical amino acid composition; and (iv) activity cliffs remain unresolved by both machine learning and MD, marking a limit of current computational methods. BATTLE-AMP is released as an open Snakemake framework at https://github.com/szczurek-lab/battleamp-snakemake for benchmarking new models and scoring novel candidate libraries.
DragMesh-2: Physically Plausible Dexterous Hand-Object Interaction with Articulated Objects
Dexterous interaction with articulated objects is important for household, assistive, and humanoid manipulation, where multi-finger hands can provide compliant contact patterns beyond parallel-jaw grasping. However, articulated-object manipulation differs from static-object manipulation: the target part cannot be directly actuated, and its motion must emerge through sustained physical hand–handle contact. This makes the transition from object-centric articulated generation to hand-driven dexterous hand–object interaction non-trivial, since geometric trajectory replay or open-loop execution does not model the contact dynamics required to move the articulated part. Moreover, policies trained only for task completion under fixed dynamics can overfit nominal contact loads, especially without tactile or force feedback, and may degrade when the contact load changes. To address these challenges, we present DragMesh-2, a contact-driven framework for dexterous interaction with articulated objects that extends articulated interaction from object-centric generation to hand-driven dexterous hand–object interaction, where articulated motion must arise through physical contact. We further propose PICA, a physically informed contact-aware training mechanism that injects physical signals into policy learning without tactile or force feedback, improving robustness and task success under changing contact loads. Finally, we conduct systematic evaluation across multiple damping conditions and articulated-object categories to study robustness under contact-load variation, and provide a pure-geometry dexterous interaction resource to support future loco-manipulation and humanoid hand–object interaction research. Across seven GAPartNet objects, DragMesh-2 achieves stronger robustness under contact-load variation than the compared methods while maintaining high task success across damping conditions.
A Finite-Volume Scheme for the Continuum Extrapolation of Lattice Step-Scaling in (2+1)D Hamiltonian U(1) Gauge Theory
arXiv:2606.20029v1 Announce Type: cross Abstract: We propose a finite-volume scheme to perform controlled continuum extrapolations of the lattice step-scaling function, a key ingredient for determining the running coupling in a Hamiltonian lattice gauge theory in small volumes. As a testbed, we employ a dual Hamiltonian formulation of pure U(1) gauge theory in (2+1) dimensions and an operator basis that remains efficient toward weak coupling. We describe the implementation of static external charges on the spatial lattice and study, using matrix product states, the resulting confining string, from which we extract the static potential and a force-based renormalized coupling. Using the proposed finite-volume scheme, we demonstrate a stable continuum limit of the step-scaling function on the lattice sizes accessible to present Hamiltonian simulations. The method is readily extendable to other gauge groups and dimensions, providing a pathway toward Hamiltonian step-scaling studies in other theories.
DynaWM: Dynamics-Aware Distillation with World Model and Momentum Targets for Smooth Locomotion over Continuous Stairs
arXiv:2606.24089v1 Announce Type: cross Abstract: Recent advances in control have enabled bipedal-wheeled robots to traverse slopes and single-step obstacles, yet long staircase traversal remains challenging as current teacher-student frameworks suffer from weakened dynamics-aware representations and incomplete terrain geometry encoding. To bridge this gap, we propose DynaWM, a dynamics-aware representation learning framework. To enhance terrain encoding capability and enable transparent assessment, we introduce a world model as a regularizer to enforce forward-dynamics awareness, preserving comprehensive terrain geometry while facilitating hierarchical encoding visualization. To stabilize knowledge transfer, we employ a momentum target encoder to provide consistent distillation targets, preventing dimensional collapse from non-stationary teacher updates. Evaluation of the learned representations through Principal Component Analysis (PCA) visualization and quantitative metrics reveals that our encoder hierarchically captures terrain geometry with higher terrain encoding capability, leading to enhanced terrain adaptability and motion smoothness. Experimental results in simulation and real hardware demonstrate that our method achieves superior terrain adaptability and motion smoothness, enabling bipedal-wheeled robots to overcome diverse continuous stairs, as shown in Fig. 1.
Interpretation as Linear Transformation: A Cognitive-Geometric Model of Concepts and Meaning
arXiv:2512.09831v2 Announce Type: replace Abstract: This paper develops a geometric framework for modeling concepts, motivation, and influence across cognitively heterogeneous agents. Each agent is represented by a personalized value space, a vector space encoding the internal dimensions through which the agent interprets and evaluates meaning. Evaluative concepts are formalized as structured vectors, abstract beings, whose transmission is mediated by linear interpretation maps. An abstract being survives communication only if it avoids the null spaces of these maps, yielding a structural criterion for intelligibility, miscommunication, and concept death. Within this framework, I show how conceptual distortion, motivational drift, and the limits of mutual understanding arise from purely algebraic constraints. A central result, the No-Null-Space Leadership Condition, characterizes leadership as a property of representational reachability rather than persuasion or authority. More broadly, the model explains how abstract beings can propagate, mutate, or disappear as they traverse diverse cognitive geometries. The account unifies insights from conceptual spaces, social epistemology, and AI value alignment by grounding meaning preservation in structural compatibility rather than shared information or rationality. I argue that this cognitive-geometric perspective clarifies the epistemic boundaries of influence in both human and artificial systems, and offers a general foundation for analyzing conceptual dynamics across heterogeneous agents.