Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-19

Closing the Social-Semantic Gap: SPSD for Edge-Based Prompt Compression in Cloud LLM Inference

arXiv:2606.19364v1 Announce Type: new Abstract: The prefill stage of Large Language Model (LLM) inference is a growing contributor to cloud-scale energy cost. Many consumer-support and conversational prompts contain social scaffolding: politeness markers, apologetic preamble, repetition, and rapport-building language that is important for human communication but carries low marginal information for machine reasoning. We call this discrepancy the Social-Semantic Gap. We present SPSD (Sentiment Preserving Semantic Distillation), an edge-based pipeline that compresses user prompts using a 4-bit quantised Small Language Model before transmission to a cloud-deployed LLM. Evaluation on a 248-prompt corpus using Gemma-2-2B-Instruct (Q4_K_M) as the SLM and Llama-3.1-8B-Instruct as the cloud evaluation model yields a mean input token saving of 99.9 tokens per distilled call, with all 146 distilled calls yielding positive savings. Response quality, assessed by blind LLM-as-judge scoring across 121 pairs, is non-inferior to the raw path within a pre-specified 1-point margin on a 15-point rubric; the judge awarded 43 percent ties, 28 percent distilled wins, and 29 percent raw wins. Cosine similarity is mixed: mean 0.682, median 0.712, with 54.1 percent of pairs above the 0.70 reference threshold. Safety-critical domains are conservatively routed to passthrough via rule-based gates. Per-call net energy saving is estimated at 70-270 uWh under stated assumptions. SPSD shows that on-device prompt distillation can reduce cloud LLM input-token cost while preserving response quality within a practical non-inferiority margin.

02.
arXiv (CS.AI) 2026-06-12

Definitional alignment before capability alignment: a Design-Science framework for adjudicating claims about AGI

arXiv:2606.12713v1 Announce Type: new Abstract: Claims that artificial general intelligence has already arrived and claims that it remains decades away are often defended from overlapping evidence. "AGI" lacks a single shared and stable referent and competing operationalizations can return different verdicts on the same system. This article treats that under-specification as a design and governance problem. Following Design Science Research Methodology, it develops DAF-AGI, a second-order conceptual artifact with two coupled components: five ordinal criteria for assessing the adjudicative fitness of candidate definitions and a structured governance audit of authorship, interest, certification, external verification and revision authority. The artifact is demonstrated on five prominent measurement families and one deflationary boundary position in a documented corpus and then stress-tested against a stylized strong arrival claim: that current generative systems constitute AGI because they outperform a well-educated adult on many cognitive tasks. On evidence from the cited 2024-2025 sources, the claim was certifiable only under a performance-based operationalization; capability-ontology, psychometric and skill-acquisition approaches did not certify it, the economic family remains indeterminate and the deflationary position refuses binary adjudication. The contribution is a novel integration and operationalization, not an empirical validation: independent application, inter-rater testing and author-external cases remain necessary. The paper further proposes definitional sovereignty as an enabling component of algorithmic sovereignty: the institutional capacity to contest, certify and revise imported technological categories under public accountability.

03.
arXiv (CS.CV) 2026-06-16

HadBalance: A Plug-and-Play Unified Global Geometric Prior Framework for Generalizable Biomedical Segmentation

Precise biomedical image segmentation is crucial for clinical diagnosis. Geometric cues (e.g., boundary, shape, and topology) can improve structural consistency, yet most are task-specific and lack a unified geometric foundation that generalizes across organs and modalities. We are motivated by the observation that several medical segmentation targets can be approximated as globally near-convex shapes. A convex region is one in which any two interior points can be connected by a line segment entirely contained within the region. In practice, medical targets may exhibit small local concavities or boundary irregularities; we refer to such globally convex-like shapes as near-convex. Motivated by this, we derive Hadwiger Shape Priors from Hadwiger's theorem as an interpretable global regularizer using three 2D measures: area A, perimeter P, and Euler characteristic chi, enabling transfer across organs and modalities. However, because medical datasets are shape-heterogeneous, enforcing near-convex priors uniformly can over-regularize non-convex anatomy with significant concavities, washing out concavities and fine details and degrading segmentation accuracy. To address this challenge, we propose Conflict-Aware Objective Balancing (CAOB), which integrates shape priors with segmentation in a gradient-aware manner. For each prior, CAOB removes only the gradient component that conflicts with segmentation while preserving the remaining aligned component, and adaptively regulates objective influences to prevent prior dominance. This enables stable use of shape priors on shape-heterogeneous data without erasing genuine concavities or fine structural details. We call this plug-and-play framework HadBalance.

04.
arXiv (CS.CL) 2026-06-15

Did You Forget What I Asked? Prospective Memory Failures in Large Language Models

作者:

Large language models often fail to satisfy formatting instructions when they must simultaneously perform demanding tasks. We study this behaviour through a prospective memory inspired lens from cognitive psychology, using a controlled paradigm that combines verifiable formatting constraints with benchmark tasks of increasing complexity. Across three model families and over 8,000 prompts, compliance drops by 2-21% under concurrent task load. Vulnerability is highly type-dependent: terminal constraints (requiring action at the response boundary) degrade most, with drops up to 50%, while avoidance constraints remain comparatively robust. A salience-enhanced format (explicit instruction framing plus a trailing reminder) recovers much of the lost compliance, restoring performance to 90-100% in many settings. Interference is bidirectional: formatting constraints can also reduce task accuracy, with one model's GSM8K accuracy dropping from 93% to 27%. In additional stacking experiments, joint compliance declines sharply as constraints accumulate. All results use deterministic programmatic checkers without an LLM-as-judge component on publicly available datasets.

05.
arXiv (CS.AI) 2026-06-18

UPLOTS: A Unified Pretrained Language Model for Constrained Time-series Generation

arXiv:2606.10466v2 Announce Type: replace-cross Abstract: In time-series generation, existing approaches typically handcraft ortrain a separate model for each dataset, which hinders their scalability and fails to leverage shared temporal structures across domains. To address this fragmentation, we propose UPLOTS, a Unified, Prompt-guided Language model framework fOr constrained Time-Series Generation across diverse domains. Instead of building task-specific models, UPLOTS leverages a single pre-trained transformer backbone guided by learned constraint prompts, enabling on-demand generation with precise pattern control. One key innovation is our dynamic multi-dataset loss re-weighting and prompt-to-pattern mapping, which allows UPLOTS to internalize diverse temporal structures during training and conditionally generate them at inference. We evaluate UPLOTS on four real-world benchmarks and multiple constraint settings, including peak-period, calendar, load-level, and volatility patterns. Additional held-out constraint-combination and downstream forecasting experiments further demonstrate that UPLOTS generalizes beyond the original peak-pattern setting and improves data augmentation under scarce real-data regimes. Our code and baselines are available at anonymous github repo: https://anonymous.4open.science/r/UPLOTS-6C36.

06.
arXiv (CS.CV) 2026-06-16

Analyzing Visual Aircraft Representations with Sparse Autoencoders

Vision models can achieve strong performance on classification tasks, but the internal representations supporting their predictions are often difficult to interpret. This work investigates whether sparse autoencoders can decompose intermediate representations of a vision model into interpretable features. We train a ConvNeXt classifier on the FGVC-Aircraft dataset, extract spatial activations from its final feature stage, and train a sparse autoencoder on these activations. The learned sparse features are analyzed using top-activating image patches, activation strength, and class selectivity. Qualitative visual inspection reveals that several features correspond to recognizable aircraft structures and visual patterns. We evaluate a subset of selected features using input-space and feature-space ablations, measuring how blurring image patches and suppressing sparse features affect class logits, classification margins, and prediction confidence. The results suggest that sparse autoencoders can reveal partially interpretable, class-relevant visual features associated with aircraft recognition, while also exposing limitations such as polysemanticity and coarse spatial localization.

07.
arXiv (CS.LG) 2026-06-11

Tensor Methods: A Unified and Interpretable Approach for Material Design

arXiv:2602.10392v2 Announce Type: replace Abstract: When designing new materials, it is often necessary to tailor the material design to have some desired properties. As the set of design parameters grow, the search space grows exponentially, making the actual synthesis and evaluation of all material combinations virtually impossible. Even using traditional computational methods such as Finite Element Analysis becomes too computationally heavy to search the design space. Recent methods use machine learning (ML) surrogate models to more efficiently determine optimal material designs; unfortunately, these methods often (i) are notoriously difficult to interpret and (ii) under perform when the training data comes from a non-uniform sampling of the design space. We suggest the use of tensor completion methods as an all-in-one approach for interpretability and predictions. We observe classical tensor methods are able to compete with traditional ML in predictions, with the added benefit of their interpretable tensor factors (which are given completely for free, as a result of the prediction). In our experiments, we are able to rediscover physical phenomena via the tensor factors, indicating that our predictions are aligned with the true underlying physics of the problem. This also means these tensor factors could be used by experimentalists to identify potentially novel patterns, given we are able to rediscover existing ones. We also study the effects of both types of surrogate models when we encounter training data from a non-uniform sampling of the design space. We observe more specialized tensor methods that can give better generalization in these non-uniforms sampling scenarios. We find the best generalization comes from a tensor model, which is able to improve upon the baseline ML methods by up to 5% on aggregate $R^2$, and halve the error in some out of distribution regions.

08.
arXiv (CS.AI) 2026-06-19

Residual-Space Evolutionary Optimization via Flow-based Generative Models

arXiv:2606.20084v1 Announce Type: new Abstract: Data editing with generative methods typically requires differentiable objectives and gradient-based search. However, these assumptions break down in flow-based settings, where edits are performed through forward and backward integration and often involve non-differentiable or black-box objectives. We introduce residual-space evolutionary optimization, a model-agnostic framework that addresses this gap by combining flow-based generative editing with evolutionary algorithms. Building on the observation that conditional flow matching (CFM) can disentangle condition-controlled factors from instance-specific residuals, our framework directly operates in residual space and separates two complementary search regimes: self-pollination performs local exploitation through feature-preserving residual refinement, and cross-pollination promotes broader exploration by recombining residuals across heterogeneous samples. As a proof of concept, we validate on MorphoMNIST, a benchmark dataset for counterfactual generation, and on crystal data, demonstrating that this exploration–exploitation decomposition provides a useful mechanism for balancing target alignment, instance preservation, and diversity, and extends beyond images to real-world scientific domains.

09.
medRxiv (Medicine) 2026-06-22

Image-based deep learning for emergency electrocardiogram classification

Automated electrocardiogram analysis has advanced largely through digital waveforms, yet many emergency-care workflows rely on ECGs available only as printed tracings, scanned reports, PDFs or mobile photographs. We developed an image-based deep learning system for emergency ECG classification and evaluated it in InCor-EMG, an expert-adjudicated dataset of 18,519 emergency ECGs spanning 12 ECG categories, with labels from 19 cardiologists. On the held-out test set, the final ConvNeXt ensemble achieved a macro F1-score of 0.807 (95% CI, 0.788-0.825), compared with 0.820 (95% CI, 0.805-0.832) for annotating cardiologists, and higher F1-scores than Mortara Veritas in most evaluated categories. Performance was associated more strongly with inter-reader agreement than with training sample size and remained informative across scanned and photographed ECGs, with supportive performance in model-enriched temporal and heterogeneous public-image evaluations. These findings support ECG image classification when digital waveforms are unavailable.

10.
arXiv (CS.CV) 2026-06-16

Latent Space Reinforcement Learning for Inverse Material Estimation in Food Fracture Simulation

Realistic visual simulation of food manipulation requires accurate material parameters, yet these are difficult to measure directly and vary across the heterogeneous regions of a single food item. We address the inverse problem of estimating material parameters from a target description of fracture behavior in a non-differentiable continuum damage mechanics simulator. Using orange peeling as a test case, we train a neural surrogate on 2,000 forward simulations and compare Covariance Matrix Adaptation Evolution Strategy (CMA-ES, a gradient-free evolutionary optimizer) with Proximal Policy Optimization (PPO, a reinforcement learning algorithm) across the original 9-dimensional parameter space and two learned 4-dimensional latent representations. Since different oranges have different material properties, a practical inverse system must handle arbitrary targets without retraining. We train a goal-conditioned PPO policy that learns a general inverse mapping: given any target description of peeling behavior, the policy produces a material parameter estimate in a single forward pass (8 surrogate evaluations, approximately 10ms). Operating in a normalizing flow latent space with a shared surrogate evaluator, the goal-conditioned policy achieves 0.642 actual recovery when validated through the simulator, outperforming the original parameter space by 23%. A warm-start extension that initializes CMA-ES refinement from the policy's output further improves recovery to 0.828 with 540 evaluations. These findings provide a practical framework for inverse food physics and lay groundwork for vision-driven material identification from video observations of food manipulation.

11.
arXiv (CS.AI) 2026-06-12

Improving Crash Frequency Prediction from Simulated Traffic Conflicts Using Machine Learning Based Microsimulation

arXiv:2606.12500v1 Announce Type: cross Abstract: Traffic microsimulation combined with surrogate safety measures has increasingly been used as a proactive alternative to historical crash data for predicting crash frequency for current or planned road infrastructure designs. However, existing microsimulation-based safety studies have adopted simplified rule-based behaviour models, which reproduce traffic flow reasonably well but often fail to generate realistic conflict dynamics, limiting crash prediction accuracy. Recent advances in machine learning (ML)-based behaviour models offer a promising opportunity to potentially improve microsimulation realism and crash frequency predictions by learning human driving behaviour directly from large-scale trajectory datasets. To investigate this possibility, traffic microsimulation was conducted for five real-world signalised intersections in Leeds, UK, using both a standard rule-based model and a state-of-the-art ML model. Simulated vehicle trajectories were analysed using a two-dimensional Time-to-Collision metric to identify simulated conflicts, which were then modelled using Extreme Value Theory to predict crash frequency. Results show that conflicts from the ML model yielded crash predictions in line with the real-world crash data, whereas the rule-based model did not permit meaningful predictions, presumably due to a lack of model calibration to the specific simulated intersections. Directly using ML-generated simulated crashes to predict real-world crash frequency also yielded poor results, suggesting that while current ML models can realistically reproduce conflicts, they are not yet able to generate realistic crashes. Overall, the findings demonstrate that ML-based behaviour models are promising for improving crash prediction from simulated conflicts, without a need for location-specific model calibration, and suggest clear future directions for ML-based traffic microsimulation.

12.
arXiv (CS.CV) 2026-06-16

OneFocus: Enabling Real-World X-ray Security Screening with a Unified Vision-Language Model

X-ray contraband detection is critical for security in large-scale logistics and transportation, yet conventional detectors struggle to adapt to emerging contraband types and lack fundamental visual understanding. Vision-language models (VLMs) offer strong generalization but are hindered by the scarcity of high-quality X-ray image-caption data. To bridge this critical gap, we present MMXray, a meticulously curated benchmark of 52,124 image-caption pairs spanning 28 fine-grained classes of X-ray contraband. To enrich MMXray with realistic occlusion patterns, we further introduce CleanDET, a dedicated synthesis dataset containing clean foreground contraband images from 28 categories and background images with diverse density levels, together with AnyContraSyn, a controllable synthesis method designed to operate on CleanDET. We also develop OnePipe, an extensible pipeline for systematic data curation. Built on MMXray, we propose OneFocus, a unified VLM that supports four core tasks: visual question answering, contraband localization, classification, and image understanding. OneFocus achieves state-of-the-art performance in X-ray contraband understanding and demonstrates robust cross-domain generalization, establishing a strong vision-language baseline for security screening.

13.
arXiv (quant-ph) 2026-06-24

Faster algorithm for achieving minimal-size quantum decision diagrams

arXiv:2606.24789v1 Announce Type: new Abstract: The decision diagram (DD) data structure enables fast linear-algebra calculations by bringing vectors into a normal form and subsequently merging equivalent ones, yielding a minimally-sized DD modulo the equivalence relation. A fruitful application area is quantum-circuit simulation, where the vectors represent quantum states. The Local Invertible Map Decision Diagram (LIMDD) type, merges LIM-equivalent (typically Pauli-gate equivalent) vectors, can efficiently simulate Clifford circuits as well as some high-T-count circuits, and has theoretically been proven exponentially faster for simulation than other well-developed data structures, including other common DD variants. However, these exponential advantages have not fully materialized yet in existing implementations, for which the normal-form procedure, which is a highly complex algorithm, is either absent or only partially implemented. We here present a novel normal-form algorithm for Pauli-LIMDDs, achieving a worst-case speedup from $O(n^3)$ to $O(n^2)$ for an $n$-qubit DD node with a single child node while keeping the $O(n^3)$ run time in case of two distinct children nodes. We implement the algorithm as part of QolDDer, our Pauli-LIMDD simulator for quantum circuits, written from scratch in C/C++. The implementation realizes the theoretically-proven advantages of Pauli-LIMDDs on Clifford circuits, is significantly faster than the existing LIMDD simulators on such circuits, and on a public quantum-circuit data set often outperforms them by an order of magnitude. In the future, we envision that our work will enable further application and development of LIMDD variants, not only for quantum design tasks, but also for analysis of linear-algebra-based systems in general.

14.
arXiv (CS.LG) 2026-06-15

Beyond a Single Explanation of the Adam–SGD Gap

arXiv:2606.14259v1 Announce Type: new Abstract: Prior work has identified several factors that can contribute to the performance gap between Adam and SGD, spanning data aspects, architecture design, and optimization properties. Yet these explanations are often studied in isolation, leaving their relative importance unclear. In this work, we revisit these hypotheses through a controlled empirical study across vision, language, genomics, and graph tasks, spanning modern and classical architectures, and carefully designed training setups. Our results suggest that no single factor consistently explains the Adam–SGD gap. For instance, the Adam advantage can (1) persist under a uniform vocabulary distribution yet nearly disappear under a heavy-tailed one; (2) reverse in favor of SGD in softmax-attention models; and (3) become larger under soft architectural modifications, e.g., when ReLU is replaced by a GeLU nonlinearity. This suggests that the gap arises from nontrivial data and architecture interactions, rather than from a single common factor. Yet, we observe a pattern across our settings: a crossover batch size at which the relative advantage shifts from SGD to Adam as the batch size scales. These empirical results are captured by our theoretical gap model, which predicts this batch-size-dependent crossover. Our perspective helps reconcile several existing hypotheses while offering practical insights across domains.

15.
arXiv (CS.LG) 2026-06-16

Finite Resources False Discovery Rate Control in Structured Hypothesis Spaces

arXiv:2606.15393v1 Announce Type: cross Abstract: Scientific discovery relies on large-scale hypothesis testing. However, the capacity to identify true discoveries while controlling false discovery faces major challenges: obtaining relevant reference data (the null distribution) is resource-intensive, leaving finite-data uncertainty, and the procedure should account for the inherent structure in the hypothesis space, when such structure exists. Here, we present a framework for controlling the false discovery rate both when each hypothesis is evidenced only by a finite count of null draws, leaving its p-value uncertain, and when the hypothesis space carries arbitrary structure, requiring only that the structure be represented through a suitable reproducing kernel. We present two decision rules that are both robust to structural mis-specification, yet offer a distinct trade-off between exact FDR control and statistical power. The first rule guarantees exact FDR control; the second maximizes power by adapting mirror-statistic control into count space, utilizing an analytical framework to assess FDR control when exact mirror symmetry is relaxed. Furthermore, the tractability gained by the RKHS framework allows us to directly investigate finite-data uncertainties, which we leverage to suggest a policy for the efficient allocation of null distribution samples.

16.
arXiv (CS.CL) 2026-06-15

Succeeding at Scale: Enterprise Retrieval Benchmark Construction and Index-Preserving Query Adaptation for Multi-Tenant Search

Large-scale multi-tenant retrieval systems generate extensive query logs but lack curated relevance labels for effective domain adaptation, resulting in substantial underutilized "dark data." This challenge is compounded by the high cost of model updates, as jointly fine-tuning query and document encoders requires full corpus re-indexing, which is impractical in multi-tenant settings with thousands of isolated indices. We introduce DevRev-Search, a passage retrieval benchmark for technical customer support built via a fully automated pipeline. Candidate generation uses fusion across diverse sparse and dense retrievers, followed by an LLM-as-a-Judge for consistency filtering and relevance labeling. We further study and systematically evaluate index-preserving query-only adaptation strategies that fine-tune only the query-encoder while keeping the document indices fixed. Experiments on DevRev-Search, SciFact, and FiQA-2018 show that parameter-efficient fine-tuning of the query encoder delivers a remarkable quality-efficiency trade-off, enabling scalable and practical enterprise multi-tenant retrieval.

17.
arXiv (CS.AI) 2026-06-17

Brick-DICL: Dynamic In-Context Learning for Automated Brick Schema Classification

arXiv:2606.17637v1 Announce Type: new Abstract: Building Management Systems (BMS) are essential for optimizing energy efficiency and operational performance in modern buildings. However, the lack of standardization across BMS points from different manufacturers creates significant barriers to integration and data utilization. While the Brick schema offers a standardized ontology for building systems, mapping BMS points to appropriate Brick classes presents three critical challenges: (i) the extensive number of Brick classes (936 in the latest version), (ii) limited domain-specific knowledge in large language models (LLMs), and (iii) substantial manual effort required for verification. To address these challenges, we propose Brick-DICL, a two-stage dynamic in-context learning framework for automated Brick schema classification. Brick-DICL consists of two primary components: metadata-RAG, which retrieves relevant examples to enhance LLMs' domain knowledge, and class-RAG, which narrows down potential Brick classes to address the large classification space. Additionally, we implement a multi-LLM filtering mechanism that compares predictions across multiple models, flagging low-confidence classifications for human review. As a result: (i) General: Brick-DICL is applicable to any building management system regardless of manufacturer or metadata format; (ii) Novel and Powerful: as the first dynamic in-context learning approach for Brick schema classification, Brick-DICL achieves significant classification accuracy improvements on building datasets, outperforming existing methods; (iii) Efficient: our multi-LLM filtering strategy reduces manual verification effort, enabling rapid digital building onboarding. Extensive experiments demonstrate Brick-DICL's effectiveness across diverse building datasets, accelerating the path toward standardized, interoperable building management systems.

18.
arXiv (CS.CV) 2026-06-11

MSUE: Multi-Modal Soccer Understanding Expert

This paper presents our solution to the 2026 SoccerNet VQA Challenge. We first develop a cost-effective data synthesis pipeline driven by a Vision-Language Model (VLM), which systematically restructures raw domain data into diverse VQA samples, including concise answers and long-form responses. Second, we propose MSUE, a multi-expert question answering architecture that employs a Large Language Model (LLM) to dynamically dispatch questions to text, image, and video experts. These experts are instantiated as a strong text baseline Gemini3-Flash, a fine-tuned Qwen3-VL, and an external knowledge base, respectively, working collaboratively to enhance VQA performance. MSUE achieves an accuracy of 0.95 on the challenge benchmark, securing third place in the leaderboard.

19.
arXiv (CS.AI) 2026-06-15

FPGA-Based Neural Network Accelerators for Space Applications: A Survey

arXiv:2504.16173v3 Announce Type: replace-cross Abstract: Space missions are becoming increasingly ambitious, necessitating high-performance onboard spacecraft computing systems. In response, field-programmable gate arrays (FPGAs) have garnered significant interest due to their flexibility, cost-effectiveness, and radiation tolerance potential. Concurrently, neural networks (NNs) are being recognized for their capability to execute space mission tasks such as autonomous operations, sensor data analysis, and data compression. This survey serves as a valuable resource for researchers aiming to implement FPGA-based NN accelerators in space applications. By analyzing existing literature, identifying trends and gaps, and proposing future research directions, this work highlights the potential of these accelerators to enhance onboard computing systems.

20.
arXiv (CS.LG) 2026-06-11

Online Learning for Supervisory Switching Control

arXiv:2603.14762v4 Announce Type: replace-cross Abstract: We study supervisory switching control for partially-observed linear dynamical systems. The objective is to identify and deploy a suitable controller for the unknown system by periodically selecting among a collection of $N$ candidate controllers, some of which may destabilize the underlying system. While classical estimator-based supervisory control guarantees asymptotic stability, it lacks quantitative finite-time performance bounds. Conversely, current non-asymptotic methods in both online learning and system identification require restrictive assumptions that are incompatible in a control setting, such as system stability, which preclude testing potentially unstable controllers. To bridge this gap, we propose a novel, non-asymptotic analysis of supervisory control that adapts multi-armed bandit algorithms to a control-theoretic setting. The proposed data-driven algorithm evaluates candidate controllers via scoring criteria that leverage system observability to isolate the effects of state history, enabling both detection of destabilizing controllers and accurate system identification. We present two algorithmic variants with dimension-free, finite-time guarantees, where each identifies the matching controller in $O(N \log^2 N)$ steps, while simultaneously achieving finite $L_2$-gain with respect to system disturbances.

21.
medRxiv (Medicine) 2026-06-22

Modelling the decadal expansion of West Nile virus in Italy: the role of climatic, anthropogenic, and macroecological drivers

Abstract BACKGROUND West Nile virus (WNV) is a growing health burden in Italy. Anticipating human infection risk is hampered by the pathogen's complex ecology, highlighting the need for comprehensive early-warning tools. AIM We aimed to model municipal-level WNV risk in Italy and characterize its decadal expansion in Italy, providing a comprehensive ecological understanding of viral emergence. METHODS We applied a machine learning framework to annual human WNV case data from 2014 to 2024. The model integrated a suite of environmental, socio-economic, and macroecological predictors to generate risk projections. We evaluated the model's performance through multiple validation settings. We also performed an anticipation test for the 2025 epidemic season, using 2024 environmental data to assess the model's predictive accuracy against observed 2025 human cases. RESULTS Our model achieved robust performance (True Skill Statistic > 0.4) and captured WNV progressive expansion from 184 predicted positive municipalities in 2014 to 2,012 in 2024 (an 11-fold increase in 11 years). Seasonal minimum temperature was the primary risk driver, followed by monitoring year and population density, indicating active spatial spread. Environmental suitability consistently preceded clinical detection. Municipalities with cases in 2023-2024 exhibited significantly higher predicted suitability during 2018-2022 than those without cases (average risk 0.58 vs 0.20). Our model successfully identified emerging risk hotspots along the Adriatic coast and southern Italy before the official human spillover of 2025. CONCLUSION Embedding macroecological drivers into WNV risk modelling provides an improved understanding of drivers of rapid WNV expansion. Our model enables proactive risk mapping, surveillance efforts, and targeted public health measures.

22.
arXiv (CS.AI) 2026-06-19

SARLO-80: Worldwide Slant SAR Language Optic Dataset 80cm

arXiv:2606.20523v1 Announce Type: cross Abstract: Multimodal foundation models have advanced rapidly thanks to large optical benchmarks, but comparable resources for synthetic aperture radar (SAR) remain limited. Existing SAR–optical datasets largely rely on low-resolution, intensity-only Ground Range Detected~(GRD) products and do not preserve complex-valued SAR measurements or native acquisition geometry, which restricts physically grounded multimodal learning. In particular, large-scale public datasets combining very-high-resolution (VHR) SAR SLC, aligned optical imagery, and natural-language descriptions are still lacking. We present a VHR SAR–optical–text dataset built from open-access Umbra spotlight acquisitions distributed as Sensor Independent Complex Data (SICD). From around 2,500 worldwide scenes (VV/HH, 20cm–2m native resolution), we standardize all SAR data to an 80cm slant-range grid via band-limited FFT resampling and tile the imagery into 1024 by 1024 patches. For each SAR patch, we retrieve a high-resolution optical tile and warp it into the SAR grid using local coordinate correspondences for local pixel-level alignment. We further generate three caption variants (SHORT/MID/LONG) per sample to support vision–language training and evaluation. Our dataset contains 119,566 triplets (complex and amplitude slant-range SAR patch, aligned optical patch, natural-language description) covering 257 locations across 72 countries and a broad range of land types and infrastructures. We release fixed train/validation/test splits and the full preprocessing and baseline code to enable reproducible benchmarks for multimodal alignment on cross-modal retrieval and conditional generation in native SAR geometry. The dataset is publicly available on the Hugging Face Hub at https://huggingface.co/datasets/ONERA/SARLO-80.

23.
arXiv (CS.CL) 2026-06-16

Can LLM Agents Infer World Models? Evidence from Agentic Automata Learning

We propose agentic automata learning to evaluate the extent to which tool-calling LLM agents can uncover hidden environments through interaction. In our setup, an agent should uncover a hidden deterministic finite automaton (DFA) by interacting with an oracle through (1) membership queries ("Does this string belong to the target language?") and (2) equivalence queries ("Is this the target DFA?"). This yields a scalable testbed with controlled task complexity, measurable interaction efficiency, and strong baselines (classic automata-learning algorithms). Evaluating state-of-the-art LLMs, we find that performance drops sharply as DFA size increases. Reasoning models are markedly stronger than non-reasoning models, yet trajectory analyses reveal recurring failures in query planning, evidence integration, and hypothesis construction. Overall, our results show that current LLM agents can sometimes perform non-trivial interactive discovery, but remain far less robust and efficient than classic algorithms for the task.

24.
arXiv (CS.CL) 2026-06-18

Learning Robust Pair Confidence for Multimodal Emotion-Cause Pair Extraction

Multimodal emotion-cause pair extraction (MECPE) requires reliable pair confidence over candidate pairs. Existing pair scorers commonly use pair-level cross entropy over valid candidates, which treats links mostly independently. This leaves the relative confidence geometry among competing causes under-constrained, allowing gold pairs to stay close to hard negatives or rely on incidental non-gold context. We study this vulnerability as pair-confidence brittleness and propose RPCL (Robust Pair Confidence Learning), a training-only framework for pair-confidence learning. RPCL encourages pair confidence to be both discriminative and stable: gold pairs are separated from row-wise hard negatives through a confidence-difference margin constraint, and clean pair predictions are aligned with predictions from a corrupted view where non-gold contextual utterance representations are partially corrupted. The original clean pair scorer and decoding pipeline are used unchanged at inference time. On ECF, MECAD, and MEC4, RPCL improves the three-seed mean Pair F1 over a matched base model by 2.58 to 2.83 percentage points in the full text-audio-video setting, and improves mean Pair AUPRC on all three datasets. Diagnostic analysis further shows larger gold-negative confidence gaps and lower margin-violation severity. These results suggest that explicitly shaping pair confidence is an effective training strategy for MECPE.

25.
arXiv (CS.CV) 2026-06-12

CPAM: Context-Preserving Adaptive Manipulation for Zero-Shot Real Image Editing

Editing natural images using textual descriptions in text-to-image diffusion models remains a significant challenge, particularly in achieving consistent generation and handling complex, non-rigid objects. Existing methods often struggle to preserve textures and identity, require extensive fine-tuning, and exhibit limitations in editing specific spatial regions or objects while retaining background details. This paper proposes Context-Preserving Adaptive Manipulation (CPAM), a novel zero-shot framework for complicated, non-rigid real image editing. Specifically, we propose a preservation adaptation module that adjusts self-attention mechanisms to preserve and independently control the object and background effectively. This ensures that the objects' shapes, textures, and identities are maintained while keeping the background undistorted during the editing process using the mask guidance technique. Additionally, we develop a localized extraction module to mitigate the interference with the non-desired modified regions during conditioning in cross-attention mechanisms. We also introduce various mask-guidance strategies to facilitate diverse image manipulation tasks in a simple manner. CPAM can be seamlessly integrated with multiple diffusion backbones, including SD1.5, SD2.1, and SDXL, demonstrating strong generalization across different model architectures. Extensive experiments on our newly constructed Image Manipulation BenchmArk (IMBA), a robust benchmark dataset specifically designed for real image editing, demonstrate that our proposed method is the preferred choice among human raters, outperforming existing state-of-the-art editing techniques. The source code and data will be publicly released at the project page: https://vdkhoi20.github.io/CPAM