Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-11

FACTR 2: Learning External Force Sensing for Commodity Robot Arms Improves Policy Learning

arXiv:2606.12406v1 Announce Type: cross Abstract: Contact-rich manipulation requires force sensitivity, but many robot arms lack dedicated force sensors due to their high cost. We present Neural External Torque Estimation (NEXT), a data-driven method that estimates external joint torques without needing any dedicated force sensors. NEXT trains in 1 minute from only 10 minutes of free-motion data, yet achieves estimates comparable to dedicated joint-torque sensors. NEXT enables force-feedback teleoperation on low-cost arms and improves policy learning through Force-Informed Re-Sampling Training (FIRST), which up-samples pre-contact and contact segments during behavior cloning. Across five long-horizon tasks, FIRST outperforms prior force-aware policies by over 17% in task progress. Together, NEXT and FIRST bring force-aware teleoperation and policy learning to off-the-shelf robots without additional sensing hardware. Video results and code are available at https://jasonjzliu.com/factr2

02.
arXiv (CS.AI) 2026-06-11

AI Researchers Must Help Lead Arms Control to Mitigate Military AI Risks

arXiv:2606.11533v1 Announce Type: cross Abstract: The advancement of AI capabilities compels researchers and the public to be more aware of its potential worldwide impact. A pressing near-term concern is the regulation of military AI applications. Armament manufacturers and defense contractors are increasingly investing in AI capabilities and forging partnerships with AI companies, creating a burgeoning coalition that demands military leaders, arms control diplomacy experts, and AI researchers collaborate to ensure a safer future. While AI researchers often focus on the long-term implications of superintelligent AI, this approach may not adequately address the immediate challenges posed by AI in military applications. Success requires acknowledging and mitigating the emerging risks of frontier AI models that plan to be integrated into defense applications, like military AI systems. Arms control has reduced past catastrophic risks, so lessons learned from nuclear deterrence can guide AI safety and security research towards innovations in verification and diplomacy. AI researchers, however, must assist in leading the technical research that clearly defines and alleviates instability in military settings. Given these new responsibilities and the lack of sufficiently reliable solutions, we argue that AI researchers must take a leading role in advancing arms control research to minimize risk in military AI applications.

03.
arXiv (CS.LG) 2026-06-11

Renewable Lasso without Batch-Number Constraints: A Gradient-Enhanced Approach

arXiv:2606.11738v1 Announce Type: cross Abstract: We study online estimation for high-dimensional generalized linear models with streaming data. First, for the non-distributed setting, we propose a gradient-enhanced surrogate loss that approximates the cumulative loss using only historical summaries, which modifies and improves upon the existing renewable estimation approach for the same model in the high-dimensional setting, and removes the batch-number constraint in previous studies. We then extend the method to distributed streaming data under the master-client architecture, where batches are partitioned across sites and only summaries (gradient vectors) are exchanged. Instead of directing applying the popular method of Jordan et al. (2019) to the surrogate quadratic loss, our adjusted approach does not require the clients to compute the full surrogate loss. We derive non-asymptotic error bounds under the high-dimensional scaling, without the stringent constraint on the number of batches in the previous studies. Simulation results under linear and logistic models, together with a real-data application, show improved accuracy over existing renewable estimators.

04.
medRxiv (Medicine) 2026-06-11

Foundation model-based tool for automated ulcerative colitis histology scoring demonstrates non-inferiority to pathologists across multiple scoring indices

In clinical trials for ulcerative colitis (UC), pathologists assess disease severity through standardized histological indices, including the Geboes Score, Robarts Histopathology Index (RHI), and Nancy Histologic Index (NHI). Despite strong associations with clinical outcomes, histologic scoring suffers from inter- and intra-reader variability, and consensus criteria for histologic remission remain uncertain. Through a consortium approach, we developed an artificial intelligence-based measurement (AIM) tool for scoring histology in UC mucosal biopsies (AIM-HI UC). This model, trained on a large dataset of UC biopsies (N=10,230), utilizes additive multiple instance learning models leveraging PLUTO, a pathology foundation model, that predict each of the Geboes subgrades, from which the Geboes grade-level score, RHI, and NHI can be calculated. Evaluation of this model on a standalone verification set including clinical trial specimens established algorithm non-inferiority and/or superiority relative to standard qualified pathologists through comparison of algorithm-consensus and pathologist-consensus agreement metrics (non-inferior if difference >-0.1, superior if difference >0, inclusive of confidence intervals). AIM-HI UC was determined to be non-inferior to pathologists (N=3) for the prediction of all seven Geboes subgrades, grade-level Geboes, RHI, NHI, histologic improvement (GS

05.
arXiv (CS.CV) 2026-06-25

Uncertainty Quantification for Computer-Use Agents: A Benchmark across Vision-Language Models and GUI Grounding Datasets

Computer-use agents turn vision-language model (VLM) predictions into executable GUI clicks, so reliable uncertainty estimates are essential for rejection, calibration, miss-severity ranking, and spatial safety regions. Yet evidence on post-hoc uncertainty quantification (UQ) for these agents is fragmented across isolated model and dataset pairs, leaving it unclear whether UQ rankings stay stable when the agent, benchmark, or observable interface changes. We present Argus, a cross-regime benchmark for post-hoc UQ in single-step executable GUI grounding: a 27-method open-weight matrix over 4 VLM agents and 4 datasets, plus an 8-method closed-source matrix across 3 frontier vendors where logits, hidden states, and attention maps are unavailable. Evaluated methods span logit-based scores, sampling and consistency measures, hidden-state and density estimators (Mahalanobis, SAPLMA), attention-based scores, P(True) and verbalised-confidence prompting, and split-conformal prediction. The main finding is selective transfer: UQ rankings are stable across datasets for a fixed model, but degrade across model classes and observable interfaces. Hidden-state and density methods are the most stable open-weight family, while CoCoA-1MCA, Focus, sampling-based scores, and verbalised self-assessment win in specific regimes. Within-model ranking transfer is strong (Spearman rho up to 0.969), but cross-tier transfer to closed-source vendors averages only +0.08, so closed-source UQ should be reranked on the target rather than extrapolated. Conformal click regions show score-level discrimination is not enough for deployment: locally weighted disks shrink radii by 40-60% when the plug-in UQ is calibrated, but coverage degrades under calibration-test or interface mismatch. We release per-item records, calibration/test splits, UQ scores, and analysis scripts for regime-aware UQ selection in GUI agents.

06.
medRxiv (Medicine) 2026-06-24

Pembrolizumab, Temozolomide and HSPPC-96 Vaccine in Newly Diagnosed Glioblastoma Post-Chemoradiation: Results from a Multi-institutional, Phase 2, Randomized, Placebo-Controlled Trial

Background: GBM is one of the most common and most aggressive brain tumors in adults, and upfront standard of care treatment has limited efficacy. Immune checkpoint inhibitor strategies have significantly improved outcomes in various solid tumors but have not proven effective in GBM, suggesting other strategies may be needed to realize their full potential. Methods: GBM patients were treated with upfront standard of care chemoradiation with temozolomide and pembrolizumab, followed by adjuvant temozolomide and pembrolizumab for six nine-week cycles. Depending on production of sufficient vaccine, patients were randomized into HSPPC-96 vaccine or placebo group (q4 weeks) while those with failed vaccine production continued on study unblinded as an ancillary group. The primary objective was overall survival at one year, and secondary endpoints were progression-free survival at six months, overall and progression-free survival, radiographic response, and tolerability by patient-reported outcomes and adverse event documentation. Results: 90 patients were screened, 32 were treated (8 vaccine, 9 placebo, 15 ancillary), and 26 were evaluable for radiographic responses prior to accrual termination. The study did not meet its primary endpoint of overall survival at one year (65.5% in vaccine group, 75% in placebo). Progression-free endpoints were mildly improved in the vaccine group but were not significant, and response rates were not significantly different. The regimen was well-tolerated and safe. Conclusions: Though limited by early discontinuation, these findings do not support the combination of pembrolizumab and HSPPC-96 vaccine with standard of care therapy. Trials Registration: ClinicalTrials.gov identifier: NCT03018288

07.
medRxiv (Medicine) 2026-06-23

Intellectual Property Literacy, Innovation Readiness and Innovation Practice in Syria's Pharmaceutical Sector: A Cross-Sectional Study

Background Innovation in pharmaceutical sectors operating under resource and institutional constraints may depend not only on knowledge and attitudes but also on the conditions that enable innovation-related activities to occur. This study examined the relationships among intellectual property (IP) literacy, innovation attitudes, innovation readiness, and reported innovation practice among pharmaceutical professionals in Syria. Methods A cross-sectional survey was conducted among 303 pharmaceutical professionals between March and April 2026. Four composite indices were constructed to assess IP literacy, innovation attitudes, innovation readiness, and innovation practice. Descriptive statistics, correlation analyses, group comparisons, and multivariable regression models were used to characterize patterns of association among study domains. The analysis was designed to identify empirical patterns rather than infer causal relationships. Results Innovation attitudes were comparatively high (73.56/100), whereas innovation readiness (17.00/100) and innovation practice (12.65/100) were substantially lower. IP literacy was positively associated with innovation readiness (r = 0.384, p < 0.001) and innovation practice (r = 0.205, p < 0.001). In contrast, innovation attitudes were not significantly associated with reported innovation practice (p = 0.332). Regression analyses indicated that the inclusion of innovation readiness improved model fit beyond specifications based on knowledge and attitudes alone ({Delta}R{superscript 2} = 0.058, p = 0.028). Significant differences in readiness and practice were observed across professional groups (p < 0.001), whereas knowledge and attitudes showed limited variation. Conclusions High levels of innovation-related knowledge and positive attitudes did not correspond to high levels of reported innovation practice in this setting. The findings suggest that innovation readiness may capture enabling conditions that are not reflected by knowledge or attitudinal measures alone. These results support the value of examining contextual and institutional factors when assessing innovation capacity in resource-constrained pharmaceutical systems. Given the substantial gap observed between innovation attitudes and innovation practice, educational strategies may represent one avenue for strengthening innovation readiness. In the Syrian context, strengthening innovation-oriented education and university-industry engagement may help cultivate innovation competencies and support the translation of research into practical applications.

08.
arXiv (quant-ph) 2026-06-19

Near-Optimal Learning of Local Lindbladians

arXiv:2606.20535v1 Announce Type: new Abstract: We study the problem of learning local Lindbladians from black-box access to the physical evolution, and the goal is to estimate all Hamiltonian and dissipative coefficients. We give an algorithm built directly from finite-time channel probes, which runs the unknown evolution for short times, estimates the corresponding Pauli transfer matrices from classical shadows, and converts these estimates into Lindbladian coefficients by stable local Fourier inversions. For fixed locality and bounded dissipative site degree, the uses of the dynamical evolution and total evolution time scale as $\widetilde{O}(\Lambda^2/\varepsilon^2)$ and $\widetilde{O}(\Lambda/\varepsilon^2)$ respectively, in the local dynamical strength bound $\Lambda$ and target accuracy $\varepsilon$, with only logarithmic dependence on the number of qubits. The algorithm is non-adaptive, uses no ancillas, and uses only random product states as inputs followed by random Pauli measurements. The method does not require knowing the support of the Lindbladian in advance. We complement the algorithm with matching lower bounds, showing that the learning algorithm is near-optimal both in physical dynamics accesses and in total evolution time. We construct a single-qubit dephasing Lindbladian family that already requires $\Omega(\Lambda^2/\varepsilon^2)$ channel uses and $\Omega(\Lambda/\varepsilon^2)$ total evolution time, even for adaptive algorithms with arbitrary ancillas and measurements. In particular, the lower bounds imply that the Heisenberg-limited scaling achievable for Hamiltonian learning is information-theoretically impossible once dissipative coefficients must be estimated.

09.
arXiv (CS.CV) 2026-06-15

IndustryBench-MIPU: Benchmarking Multi-Image Attribute Value Extraction for Industrial Products

Industrial products such as valves and circuit breakers are defined by dense technical specifications that govern procurement, compatibility, and safety across supply chains. These specifications are scattered across multiple heterogeneous product images, including specification tables, nameplates, and technical drawings, yet whether Multimodal Large Language Models (MLLMs) can reliably recover them remains underexplored. To fill this gap, we introduce IndustryBench-MIPU, the first large-scale benchmark for multi-image industrial product understanding, built around structured attribute extraction – recovering property-value pairs from product images. This task jointly probes text recognition on specification tables and nameplates, visual reasoning over technical drawings, domain knowledge to decode industrial terminology, and cross-image evidence integration to assemble scattered specifications. Concretely, the benchmark comprises 4,559 products across 27,652 images with 103,703 annotations spanning 18 industrial categories, constructed through multi-model consensus and three-tier quality assurance. Evaluating nine MLLMs under both single-image and product-level multi-image settings reveals a stark completeness gap: models achieve high precision (86–94%) but the best recovers only 49.9% of product-level attributes; moving from single-image to multi-image extraction costs 15–34 percentage points of recall. Multi-image completeness, not single-image accuracy, is the core bottleneck. Dataset and code are publicly available.

10.
arXiv (CS.AI) 2026-06-11

Geometric Erasure by Contrastive Velocity Matching in Rectified Flows

arXiv:2606.00140v2 Announce Type: replace-cross Abstract: While the rapid adoption of multimodal generative models offers immense potential, it has also increased the risks of harmful content synthesis, deepfakes, and copyright infringements. To address these challenges, concept erasure has emerged as a prospective safeguard. However, as the field gradually transitions from U-Net-based diffusion models to Rectified Flow Transformers, erasure research has struggled to keep pace. In this work, we introduce GEM, a simple but highly effective erasure framework for Rectified Flow models. As part of our contribution, we establish a principled bridge between trajectory-based unlearning grounded in Generative Flow Networks and classic teacher-guided erasure: we translate trajectory-based signals into a teacher-guided flow-matching setup that unifies the strengths of both paradigms. Concretely, a teacher provides complementary attraction and repulsion signals that we combine into a single geometric guidance objective, yielding targeted suppression of unwanted concepts while preserving benign generation.

11.
arXiv (CS.CV) 2026-06-16

EmoZone-Talker: Regional Semantic Control of Audio-Driven 3DGS Talking Heads via Facial Action Units

3D Gaussian Splatting (3DGS) has shown strong potential for high-fidelity talking head synthesis. However, enabling fine-grained, interpretable, and editable facial expression control remains fundamentally challenging due to intrinsic conflicts between speech-driven facial dynamics and explicit expression signals. Existing methods rely on implicit multimodal fusion, leading to spatial entanglement and temporal instability. We present EmoZone-Talker, a novel framework that reformulates audio-driven facial animation as a structured spatial-temporal coordination problem under cross-modal conflicts. Our approach introduces an explicit spatial disentanglement and temporal dynamics modeling of facial motion. Specifically, we propose Synergy Zones with Prioritized Attention Bias (SZ-PAB) to explicitly decouple modality contributions via region-wise constraints guided by anatomical priors, and a Channel-Independent Temporal AU Encoder (CIT-AE) to model temporally coherent AU dynamics. By integrating these representations into 3D Gaussian deformation, EmoZone-Talker enables precise and interpretable control over facial expressions. Extensive experiments demonstrate that our method improves expression controllability and realism, with notable gains in upper-face accuracy and temporal coherence, while preserving high rendering quality and accurate lip synchronization. Code will be publicly released to facilitate reproducibility and further research.

12.
arXiv (CS.AI) 2026-06-16

Snyk VulnBench JS 1.0: Can LLMs Find the Same Bugs Twice?

arXiv:2606.15762v1 Announce Type: cross Abstract: We ran 300 repeated vulnerability-finding scans to measure how repeatable agentic large language model (LLM) security review is on the same JavaScript code, prompt, and benchmark harness. The headline result is that LLM security findings were unevenly repeatable: reference-matched findings were stable, but extra model reports varied heavily from run to run. Across 250 model runs, 80 of 161 unique unmatched findings appeared in only one of five identical repetitions, while only 22 appeared in all five. By contrast, when Claude matched a Snyk Code reference finding, the behavior was much more stable: 134 of 158 unique reference-matched findings appeared in all five repetitions. The benchmark also shows complementarity. Models consistently found familiar, high-signal exploit shapes, and in one case surfaced a likely Snyk Code product gap. Snyk Code static application security testing (SAST) was deterministic and better at systematically enumerating repeated data-flow sinks. The results support combining agentic LLM review with deterministic SAST rather than treating either technique as a replacement for the other.

13.
arXiv (CS.CV) 2026-06-25

Entropy-Controlled Flow Matching

Modern vision generators transport a base distribution to data through time-indexed measures, implemented as deterministic flows (ODEs) or stochastic diffusions (SDEs). Despite strong empirical performance, standard flow-matching objectives do not directly control the information geometry of the trajectory, allowing low-entropy bottlenecks that can transiently deplete semantic modes. We propose Entropy-Controlled Flow Matching (ECFM): a constrained variational principle over continuity-equation paths enforcing a global entropy-rate budget d/dt H(mu_t) >= -lambda. ECFM is a convex optimization in Wasserstein space with a KKT/Pontryagin system, and admits a stochastic-control representation equivalent to a Schrodinger bridge with an explicit entropy multiplier. In the pure transport regime, ECFM recovers entropic OT geodesics and Gamma-converges to classical OT as lambda -> 0. We further obtain certificate-style mode-coverage and density-floor guarantees with Lipschitz stability, and construct near-optimal collapse counterexamples for unconstrained flow matching.

14.
arXiv (CS.AI) 2026-06-24

RIFT-Bench: Dynamic Red-teaming For Agentic AI Systems

arXiv:2606.23927v1 Announce Type: new Abstract: Agentic AI systems powered by large language models (LLMs) are rapidly evolving into autonomous decision-making systems, exposing attack vectors beyond those of traditional LLM vulnerabilities. Existing security evaluations are often tied to specific implementations or domains, limiting unified comparison across heterogeneous systems. To address this gap, we introduce RIFT-Bench, a graph representation-driven methodology for dynamic red-teaming that enables unified evaluations across diverse agentic architectures. Building on a novel hierarchical representation, RIFT-Bench operates in two automated phases: Discovery, which extracts system structure, and Scanning, which deploys adaptive adversarial attacks and produces a comprehensive evaluation report. It evaluates the examined system itself, leveraging a broad set of dynamically adaptable adversarial probes across diverse attack vectors and objectives. We demonstrate the effectiveness of the proposed evaluation pipeline across 45 agentic systems spanning a diverse range of implementations, showing that the approach generalizes effectively to heterogeneous agentic architectures. Beyond systems and attacks, RIFT-Bench also supports direct evaluation of mitigation strategies. These key capabilities make RIFT-Bench a scalable foundation for security evaluation of agentic AI systems.

15.
arXiv (CS.CV) 2026-06-19

Cinematic Compositing Using Character-Environment-Harmonized Video Generation Models

Cinematic compositing aims to integrate green-screen characters into novel environments while maintaining physical and photometric realism. Previous methods often fail to capture the complex bidirectional interactions between characters and their surroundings, which we characterize as Character-to-Environment (C2E) physical interaction and Environment-to-Character (E2C) lighting harmonization. To address this, we propose an end-to-end video diffusion framework that jointly models C2E and E2C interactions, specifically handling the challenges of interactive props. Our approach introduces a tri-mask-guided architecture with RGB-D joint denoising to ensure physically consistent interactions among the character, props, and environment. We further develop an efficient prior-driven data curation pipeline to construct high-quality relighting pairs without expensive rendering. Finally, a reference-conditioned mechanism enables controllable environment synthesis and precise prop replacement. Extensive experiments demonstrate that our framework significantly outperforms existing methods in cinematic-quality dynamic video compositing.

16.
arXiv (CS.AI) 2026-06-11

Physics-informed generative AI for semiconductor manufacturing: Enforcing hard physical constraints in generative models by construction

arXiv:2606.11247v1 Announce Type: cross Abstract: Generative models are increasingly used to propose designs, data, and control actions for physical systems, yet many such systems are governed by hard physical constraints rather than by perceptual plausibility. Semiconductor manufacturing provides a demanding test case: generated masks, layouts, synthetic defect data, and process recipes must obey lithography, transport, reaction, and device-physics constraints, because physically invalid samples are not merely low quality but unusable. This Perspective argues that semiconductor manufacturing exposes a broader computational-science challenge, namely that generative AI for constrained physical domains must be physics-informed by construction, not corrected only through post-hoc filtering. We survey the emerging architectural toolkit, including physics-informed diffusion, PDE-constrained variational models, neural-operator priors, and conservation-law-respecting generative networks, and show how it connects to differentiable lithography, TCAD, process simulation, and autonomous experimentation. We identify four integration patterns between generative models and physics-based simulators, and we propose a research agenda centered on physics-fidelity benchmarks, differentiable simulator infrastructure, and multimodal foundation models for physical design and manufacturing. The central claim is analytical rather than rhetorical: where physical validity is the binding criterion of success, architectures that enforce it by construction should be expected to outperform those that filter for it after the fact, and the fab is the setting where this distinction is sharpest.

17.
arXiv (CS.CV) 2026-06-25

ScalingAR: Scaling Confidence for Autoregressive Image Generation

Test-time strategies have shown remarkable success in improving large language models, but their application to next-token prediction (NTP) autoregressive (AR) image generation remains largely underexplored. Existing test-time scaling (TTS) methods for visual autoregressive models (VAR) rely on frequent partial decoding and external reward models, which are inefficient and often ineffective for NTP-based image generation due to the inherent instability of intermediate decoding results. To address these limitations, we propose ScalingAR, a novel test-time scaling framework tailored for NTP-based AR image generation. ScalingAR introduces token entropy as a confidence signal and operates at two complementary levels: (i) Profile Level, integrates intrinsic uncertainty and conditional utilization into a unified confidence state, and (ii) Policy Level, leverages this state for adaptive trajectory pruning and dynamic guidance scheduling. Without requiring early decoding or auxiliary rewards, ScalingAR achieves significant improvements across diverse benchmarks. Experiments show that ScalingAR (I) improves base models by $12.5\%$ on GenEval and $15.2\%$ on TIIF-Bench, (II) reduces visual token consumption by $62.0\%$ while outperforming baselines, and (III) enhances robustness, mitigating performance degradation by $26.0\%$ in challenging scenarios. These results establish ScalingAR as a robust and efficient test-time scaling solution for autoregressive image generation.

18.
arXiv (CS.LG) 2026-06-24

Machine Learning and Deep Learning for Exoplanet Detection and Atmospheric Characterization with JWST and the Upcoming Ariel Mission

arXiv:2606.23766v1 Announce Type: cross Abstract: The detection and atmospheric characterization of exoplanets have entered a new data-intensive era driven by the James Webb Space Telescope and the upcoming Ariel mission. Modern surveys produce millions of light curves and high-resolution spectra that overwhelm traditional pipelines, motivating the rapid integration of Machine Learning and Deep Learning methods into the exoplanet workflow. This review synthesizes the latest progress in applying ML/DL techniques to exoplanet detection (transit identification, candidate vetting, false-positive rejection) and atmospheric characterization (retrieval, detrending, cross-correlation, surrogate modelling) in the context of JWST and Ariel. We start with classical algorithms such as Random Forests and Convolutional Neural Networks, move through Transformers and Recurrent architectures, then survey modern simulation-based inference using Neural Posterior Estimation and Flow Matching Posterior Estimation with normalizing or continuous normalizing flows. We discuss benchmark efforts, including the Ariel Machine Learning Data Challenges (2019 to 2025) hosted with NeurIPS, and key JWST case studies such as the WASP-39b Early Release Science programme. Results indicate that DL approaches consistently match or exceed traditional pipelines in both speed and accuracy, while ML-driven retrievals reduce inference time from CPU-hours to seconds and can accelerate nested-sampling retrievals by factors of 3-8 without compromising Bayesian evidence. We identify outstanding challenges interpretability, calibration of uncertainties under noisy data, hybrid modelling, and the generalization of models across instruments and planet populations and outline a research roadmap spanning the JWST era and beyond into Ariel's launch in 2029.

19.
arXiv (CS.AI) 2026-06-19

RIVET: Robust Idempotent Voice Attribute Editing

arXiv:2606.19629v1 Announce Type: cross Abstract: Voice attribute editing models modify characteristics such as age and gender while preserving speaker identity. In large-scale speech datasets, however, attribute annotations are often noisy or inconsistent, which can cause conditional generative models to produce unstable edits. In this work, we show that idempotency provides an effective mechanism for improving robustness to noisy labels. An idempotent operator is one for which repeated application does not change the result, i.e., f(f(x)) = f(x). Enforcing this property acts as an implicit regularizer that reduces sensitivity to mislabeled examples. We introduce RIVET, a training framework that incorporates an idempotency objective to improve robustness to label noise. We evaluate RIVET under controlled label noise and on the GLOBE dataset with naturally noisy annotations. RIVET improves editing success and better preserves speaker identity than standard training, showing that idempotency improves robustness in voice editing models.

20.
arXiv (CS.CV) 2026-06-15

Overhead Wildlife Locator (OWL): Benchmarking Weakly Supervised Learning for Aerial Wildlife Surveys

Automated aerial wildlife surveys increasingly rely on deep learning, yet standard object detectors require bounding-box annotations, reported to be up to seven times slower and three times more expensive to produce than point-level labels. To address this bottleneck, we introduce the Overhead Wildlife Locator (OWL), a weakly supervised density-estimation framework with three variants: OWL-C, a fully convolutional model for high-throughput screening; OWL-T, a Swin-augmented hybrid for heterogeneous, cluttered scenes; and OWL-D, built on a frozen DINOv3 ViT-H+/16 encoder with a DPT-style fusion decoder. We benchmark all three against POLO, YOLOv11n, and YOLOv11l across five public aerial datasets, from sparse fixed-wing savanna surveys to dense UAV paddock imagery, and against the published HerdNet baseline on its native Delplanque split. OWL-D sets a new state of the art on Delplanque (0.934 AP vs. HerdNet's 0.840) and records the highest AP on four of the five datasets. Performance is regime-dependent: on the extreme-density SheepCounter UAV dataset the hybrid OWL-T leads (0.978 AP) and the convolutional variants attain the lowest counting error, whereas the foundation-based OWL-D degrades, indicating which variant suits which survey type. We further validate operational readiness on the Alaska Department of Fish and Game's 2022 Central Arctic Caribou census: under cross-herd and cross-temporal transfer, OWL-C fine-tuned on the 2017 Porcupine Caribou Herd split attains F1 = 0.965 on a held-out patch test set, with a signed count error of +3.1% aggregated across the released test patches. We release the OWL code, model weights, and the annotated Porcupine Caribou Herd 2017 (PCH) and Central Arctic Herd 2022 (CAH) patches, the first open patch-level datasets for large-scale caribou aerial surveys, at https://github.com/microsoft/MegaDetector-Overhead.

21.
arXiv (CS.AI) 2026-06-24

Low-power analogue neural networks with trainable nonlinear connections for continuous control

arXiv:2606.23742v1 Announce Type: cross Abstract: Physical neural networks promise low-power machine learning by computing directly with analogue device physics, but most architectures force nonlinear device responses to act as scalar weights. Inspired by Kolmogorov-Arnold networks, we place trainable nonlinear functions on the connections, making each physical connection a learnable computational element. Realising these functions as analogue band-pass filters on field-programmable analogue arrays, we find that the benefit is task-dependent and follows from the smoothness of the physical basis: the networks represent smooth, continuously valued targets, including robotic kinematics, continuous control, and photovoltaic maximum-power-point tracking, with far fewer nodes and connections than multilayer perceptrons, but offer no parameter-efficiency advantage on classification-like decision boundaries. Trained networks transfer to hardware across approximately 35,000 connections with quantified fidelity, and a dedicated CMOS implementation is projected to operate at approximately 30 microwatts. A memristive realisation reproduces the same behaviour in simulation, indicating that the advantage comes from placing trainable nonlinearity on connections, rather than from a particular device.

22.
arXiv (CS.CV) 2026-06-19

Through the PRISM: Preference Representation in Intermediate States of Video Diffusion Models

Evaluating video generation with clean, pixel-based reward models disconnects evaluation from the noisy diffusion process and incurs massive VAE decoding costs. In this paper, we challenge this paradigm by asking a fundamental question: Can a powerful video generator inherently discriminate preferences directly from noisy latents? To answer this, we introduce PRISM (Preference Representation in Intermediate States of Diffusion Models). PRISM employs a lightweight Query-based Aggregation head with a frozen video diffusion backbone to decode preference signals from noisy latents. Surprisingly, PRISM not only achieves SOTA preference accuracy but also unlocks strong noise-robustness, which enables early-stage Best-of-$N$ sampling. This allows for filtering suboptimal candidates at the very beginning of denoising, drastically reducing computation while boosting video quality. We also reveal a strong positive correlation between a backbone's generative performance and its inherent evaluative power, enabling self-improving video backbones.

23.
arXiv (CS.AI) 2026-06-25

SycoEval-EM: Sycophancy Evaluation of Large Language Models in Simulated Clinical Encounters for Emergency Care

arXiv:2601.16529v3 Announce Type: replace Abstract: Large language models (LLMs) deployed in clinical decision support may acquiesce to patient requests for care that conflicts with evidence-based guidelines. We developed SycoEval-EM, a multi-agent simulation framework to evaluate LLM robustness to adversarial patient persuasion in emergency medicine. Across 19 contemporary LLMs and 1,425 simulated clinical encounters spanning three Choosing Wisely scenarios, acquiescence rates ranged from 0% to 100%, revealing a bimodal distribution. Seven models maintained near-perfect guideline adherence, while six acquiesced in the majority of encounters. Vulnerability varied substantially across clinical scenarios. Acquiescence was highest for CT imaging requests, intermediate for antibiotic prescriptions for sinusitis, and lowest for opioid prescriptions for acute back pain. Model scale, recency, and performance on static medical benchmarks did not consistently predict robustness. All five persuasion tactics produced similar acquiescence rates, with no statistically significant differences after correction for multiple comparisons, suggesting a generalized susceptibility rather than tactic-specific weaknesses. LLM-as-judge evaluation was validated against two independent physician raters across 95 matched conversations and demonstrated near-perfect agreement for the primary outcome of acquiescence (Cohens kappa = 0.957). These findings indicate that static medical benchmarks are insufficient to predict safety performance under sustained social pressure and support incorporating multi-turn adversarial testing into clinical AI evaluation. Notably, two models achieved perfect guideline adherence across all encounters, demonstrating that robustness to patient pressure is attainable without sacrificing effective clinical communication.

24.
arXiv (quant-ph) 2026-06-16

Experimental Observation of Dynamical Phase Transitions in a Dephased Photonic Quantum Walk

arXiv:2606.15935v1 Announce Type: new Abstract: Dynamical phase transitions in open quantum systems govern how non-equilibrium states relax toward a stationary state. We study these transitions experimentally using a discrete-time photonic quantum walk on a three-node graph. A tunable synthetic gauge flux and calibrated dephasing allow us to control time-reversal symmetry and the detailed balance properties of the effective Markovian dynamics. With detailed balance, we observe a first-order dynamical phase transition marked by a crossing of real Liouvillian eigenvalues. When detailed balance is broken, we observe a second-order dynamical phase transition at an exceptional point where eigenvalues and eigenvectors coalesce. By progressively reducing the dephasing strength, we track the crossover toward the quantum-coherent regime and determine that the transitions persist down to a finite threshold. Our results link Liouvillian spectral topology to relaxation criticality and demonstrate a controllable platform for engineered dissipative dynamics.

25.
arXiv (CS.CL) 2026-06-18

TopBench: A Benchmark for Implicit Predictive Reasoning in Tabular Question Answering

Large Language Models (LLMs) have advanced Table Question Answering, where most queries can be answered by extracting information or simple aggregation. However, a common class of real-world queries is implicitly predictive, requiring the inference of unobserved answers from historical patterns rather than mere retrieval. These queries introduce two challenges: recognizing latent intent and reliable predictive reasoning over massive tables. To assess LLMs in such Tabular questiOn answering with implicit Prediction tasks, we introduce TopBench, a benchmark consisting of 779 samples across four sub-tasks, ranging from single-point prediction to decision making, treatment effect analysis, and complex filtering, requiring models to generate outputs spanning reasoning text and structured tables. We evaluate diverse models under both text-based and agentic workflows. Experiments reveal that current models often struggle with intent recognition, defaulting to just lookups. Deeper analysis identifies that accurate intent disambiguation serves as the prerequisite for leading these predictive behaviors. Furthermore, elevating the upper bound of prediction precision requires the integration of more sophisticated modeling or reasoning capabilities.