Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CL) 2026-06-19

Manifold Bandits: Bayesian Curriculum Learning over the Latent Geometry of Large Language Models

Reinforcement learning (RL) is a central approach for improving reasoning capabilities in large language models (LLMs), where training efficiency depends critically on how problems are sampled during optimization. Existing adaptive curriculum learning methods typically prioritize prompts of intermediate difficulty, treating problem selection as a standard bandit problem with independent arms and overlooking the structured, heterogeneous nature of the task space. In this work, we frame problem sampling as a manifold-structured bandit problem with endogenous non-stationarity: problems are related through the model's latent representation space, and sampling decisions can steer how learning signals evolve across that space. To operationalize this perspective, we introduce Bayesian Manifold Curriculum (BMC), a structure-aware framework that organizes problems into a hierarchical task tree and applies Bayesian learning to guide sampling. Empirically, we find that different sampling strategies induce non-trivial tradeoffs between productivity (learning signal), diversity (coverage of the task manifold), and utility (evaluation relevance). These results show that prioritizing difficulty alone is insufficient for strong downstream performance, highlighting the importance of incorporating structure and type-awareness into problem sampling.

02.
arXiv (CS.CL) 2026-06-12

Demystifying Hidden-State Recurrence: Switchable Latent Reasoning with On-Policy Reinforcement Learning

Latent chain-of-thought compresses reasoning by replacing visible reasoning traces with continuous hidden-state recurrence, but existing formulations are difficult to optimize with standard on-policy reinforcement learning (RL) and hard to interpret causally. Our key insight is that a single pair of explicit boundary tokens can address both issues at once: discrete entry and exit anchors make the latent block compatible with standard on-policy RL, and the same anchors offer a natural foothold for mechanistic analysis. Motivated by this, we propose SWITCH, a switchable latent reasoning framework. The model emits to enter latent mode and to exit. Because the boundaries are ordinary discrete tokens, the GRPO policy ratio is well-defined at every decision point. The same anchors also expose the latent steps to direct probing and causal intervention. We train the model with a visible-to-latent curriculum and a Switch-GRPO objective that propagates gradients through recurrent latent computation. SWITCH consistently outperforms prior hidden-state-recurrence latent reasoning approaches at similar scale. Mechanistic analysis through the boundary tokens further reveals three findings: (i) is a sharply localised, learned switching policy rather than a stylistic artefact; (ii) the latent step it opens performs problem-specific, causally important computation rather than acting as an inert placeholder; and (iii) that computation is concentrated at a single hidden-state transition on entry. Together, these results show that hidden-state-recurrence latent reasoning is both RL-trainable and open to direct mechanistic analysis, including of how on-policy RL itself improves the model from the inside.

03.
arXiv (CS.CV) 2026-06-15

Scratched Lenses, Shifted Depth: Passive Camera-Side Optical Attacks

Physical adversarial attacks on vision systems are typically studied through scene manipulation, such as adversarial patches or projections, where the adversary controls what the camera observes. Camera-side attacks using stickers or auxiliary optics have also been explored, but they treat attacks as image-space perturbations from designed patterns. This misses how physical imperfections interact with scene-dependent lighting and optics. We identify a threat: passive lens-side damage that is persistent yet trigger-conditioned, producing optical artifacts that bias geometric inference under particular visual conditions. We instantiate this threat through Scratch-induced Lens Adversarial Streak Hijacking SLASH, a physical-world attack caused by small scratches on a camera lens or protective cover. Scratches interact with bright light sources and specular reflections to create structured streak artifacts that distort depth cues. Since the perturbation is fixed in the optical path but triggered by the scene, it is both persistent and selective. We formulate the attack in optical space, model the scratch pattern as a trigger-conditioned optical channel, and optimize one fixed configuration across diverse viewing conditions. We evaluate SLASH on monocular depth estimation and monocular 3D object detection in digital and real-world settings. Under the fixed-scratch constraint, directional depth shifts reach up to 32% relative error for monocular depth estimation, with consistent effects on monocular 3D object detection. Physical experiments confirm transfer to real camera recordings, inducing depth shifts above the model's natural prediction baseline. These findings reveal an attack surface where benign-looking hardware imperfections act as latent, scene-triggered adversarial mechanisms, challenging assumptions about physical robustness and motivating defenses for secure vision systems.

04.
arXiv (CS.CV) 2026-06-17

Adaptive Volumetric Mechanical Property Fields Invariant to Resolution

Accurate mechanical properties (or materials) Young's modulus ($E$), Poisson's ratio ($\nu$) and density ($\rho$) are essential for reliable physics simulation of digital worlds, but most 3D assets lack this information. We propose AdaVoMP, a method for predicting accurate dense spatially-varying ($E$, $\nu$, $\rho$) for input 3D objects across representations, improving the resolution, accuracy, and memory efficiency over the state-of-the-art. The foundation of our technique is a sparse and adaptive voxel structure SAV that efficiently represents both the input 3D shape and the material field output. We replace the fixed-voxel model of the most accurate prior method, VoMP, with a novel sparse transformer encoder-decoder model that learns to generate a unique SAV autoregressively for every input shape to represent its materials, achieving a resolution $16^3\times$ higher than prior art. Experiments show that AdaVoMP estimates more accurate volumetric properties, even with lesser test-time compute than all prior art. This allows us to convert high-resolution complex 3D objects into simulation-ready assets, resulting in realistic deformable simulations.

05.
arXiv (CS.CV) 2026-06-17

Test-Time Training for Robust Text-Guided Open-Vocabulary Object Counting

Text-guided Open-vocabulary Object Counting (TOOC) enables counting arbitrary object categories specified by text prompts, offering substantially greater flexibility than conventional closed-set counting. However, existing TOOC methods are developed and evaluated primarily on ideal images, while real-world scenes often suffer from adverse conditions such as rain, fog, darkness, and sensor noise, which severely degrade visual quality and impair vision-language alignment. To bridge this gap, we introduce Robust-TOOC, the first benchmark for evaluating TOOC under diverse corruption conditions, which covers six representative degradation types: rain, fog, darkness, Gaussian noise, salt-and-pepper noise, and mixed corruption. To improve robustness while preserving the original counting architecture, we propose Dual-TTT, a dual-architecture test-time training framework for TOOC. Specifically, during test-time training, Dual-TTT updates only the Text-guided Lightweight Denoising module (TL-Denoiser), while keeping the original counting network frozen. Inspired by diffusion models, the TL-Denoiser is optimized to remove corruption-aware noise from image representations under degraded conditions. Since only the TL-Denoiser is trained at test time, Dual-TTT is annotation-free and can be seamlessly integrated into existing TOOC models without modifying their original architecture. Extensive experiments on multiple recent TOOC baselines demonstrate the effectiveness of our method.

06.
arXiv (CS.AI) 2026-06-19

Co-policy: Responsive Human-Robot Co-Creation for Musical Performances

arXiv:2606.19914v1 Announce Type: cross Abstract: Art has long stood as a pivotal expression of human creativity. Embodied artificial intelligence offers a route for generative models to participate in that creativity through physical action rather than disembodied digital content. In robotic music co-creation, it is challenging to connect semantic musical understanding with real-time and physically executable performance. We present Co-policy, a framework for human-robot musical co-creation that separates semantic intent grounding, constrained musical variation, and visuomotor execution. To ground musical semantics, Co-policy uses pre-inference semantic anchors and a fine-tuned Qwen-vl planner (F-Qwen) to transform speech, live musical seeds, and visual observations into structured co-creation plans. To support low-latency execution, Co-policy introduces a Gaussian-Mixture Visuomotor Policy (GMP), implemented as a conditional mixture-density policy that maps target notes and visual context to multimodal robot actions in a single forward pass. Unlike robotic playback systems that merely reproduce user-specified notes, Co-policy generates complementary musical responses under both musical and physical constraints. Real-robot chime experiments, ablations, and expert evaluation show improved intent alignment, execution accuracy, and response frequency over diffusion-policy and ablated baselines, supporting physically grounded action generation as a key requirement for embodied human-AI co-creation.

07.
arXiv (quant-ph) 2026-06-12

Explicit Quantum Circuit Simulation of Nonlinear 1-Dimensional Fluid with Carleman-linearized Boltzmann Method

arXiv:2606.12770v1 Announce Type: new Abstract: Quantum computation of fluid dynamics has attracted growing attention as a key application of fault-tolerant quantum computers anticipated in the coming decade, with lattice Boltzmann methods emerging as a particularly promising approach. Explicit and efficient elementary-gate-level circuit simulations, however, have so far been demonstrated only in the linear case. Here we include the leading nonlinearity through second-order Carleman linearization of the one-dimensional Boltzmann equation, and demonstrate, via explicit quantum-circuit simulation, the preparation of the final-time state using a Taylor-expansion-based ODE solver based on the quantum singular value transformation. With this construction, we analyze the gate and qubit complexities, which scale logarithmically with the grid size, the nonlinearity captured by the higher-order Carleman linearization, and the practical utility of higher-order expansions in the Taylor ODE solver. The construction provides a concrete baseline for computational cost reduction and further developments such as extensions to higher dimensions, complex geometries, and the extraction of physical quantities, towards industrially useful quantum CFD.

08.
arXiv (CS.CV) 2026-06-16

All Eyes on the Workflow: Automated and Efficient Event Discovery from Video Streams

Disciplines such as business process management and process mining aid organizations by discovering insights about processes on the basis of recorded event data. However, an obstacle to process analysis is data multi-modality: for instance, data in video form are not directly interpretable as events. Existing approaches rely on a dictionary of activity label as input, cannot provide frame-by-frame labeling explanations, or rely on superseded computer vision techniques. In this work, we present SnapLog, an approach to extract event data from videos by converting frames to feature vectors using image embeddings and performing temporal segmentation through frame-wise similarity matrices. A generalized few-shot classification is then used to assign labels to the video segments, yielding labeled, timestamped sub-sequences of frames that are interpretable as events. Conventional process mining techniques can be used to analyze the resulting data. We show that our approach produces logs that accurately reflect the process in the videos.

09.
arXiv (CS.CV) 2026-06-16

Uncertainty Quality of VGGT: An Analysis on the DTU Benchmark Dataset

Visual Geometry Grounded Transformer (VGGT) has already attracted a great deal of attention in a short period of time, not least due to the Best Paper Award at CVPR-2025. Similar to DUSt3R and MASt3R, VGGT aims to bring about a paradigm shift by replacing established methods like bundle adjustment and feature matching with a simple, unified, feed-forward neural network that predicts camera poses, depth maps, and dense 3D structure directly from multiple images of a scene in a few seconds. A key aspect is its ability to process an arbitrary number of views consistently in a single forward pass without any post-processing or iterative optimization. For photogrammetry, this opens new possibilities for real-time, scalable, and accessible 3D reconstruction. In this context, not only high reconstruction accuracy but also high-quality uncertainty estimates are crucial, as they foster trust and enable robust quality assurance. This paper therefore investigates the quality of VGGT's uncertainty predictions. The analysis identifies an effective confidence threshold for filtering VGGT's raw output and demonstrates that enhancing uncertainty quality holds strong potential for improving the accuracy of its 3D reconstructions.

10.
arXiv (quant-ph) 2026-06-16

The Quantum Transition State

arXiv:2606.10266v2 Announce Type: replace Abstract: The transition state – the critical configuration separating reactants from products – is the central organizing concept of chemical reaction rate theory, yet for nearly a century it has been thought to have no exact quantum counterpart: the recrossing-free, one-way flux through a transition state appears to demand simultaneous knowledge of position and momentum, in conflict with the uncertainty principle. We show this obstruction is illusory and construct the quantum transition state directly from the exact quantum flow. Its stable and unstable invariant manifolds intersect in a unique bounded trajectory – the quantum transition-state trajectory – anchoring a moving dividing surface that each reactive characteristic crosses exactly once, yielding a one-way flux of the standard quantum probability current. The geometric framework underlying classical transition-state theory thus survives intact in exact quantum mechanics, in a fundamentally quantum form.

11.
arXiv (CS.CL) 2026-06-17

Variable-Width Transformers

Scaling model size, specifically depth and width, has driven significant progress in transformer-based language models. However, most architectures maintain a constant width across all layers, allocating a fixed parameter and computation budget evenly despite different layers potentially playing distinct computational roles. In this work, we empirically investigate nonuniform capacity allocation across network depth by proposing a $\times$-shaped >

12.
arXiv (quant-ph) 2026-06-19

Operator Learning for efficient Quantum Computation

arXiv:2606.20184v1 Announce Type: new Abstract: An efficient implementation of quantum algorithms is often hindered by the lack of efficient primitives for operators and state preparation. This limits both the ability of near-term quantum hardware to simulate complex problems and the potential of fault-tolerant algorithms to achieve practical quantum advantage. To address this, we propose a full-stack variational framework that transforms arbitrary operators to compact quantum circuits. The resulting variational circuits can be tailored to the connectivity and long-range interaction of the target hardware. The learning process employs backpropagation together with a cost function that efficiently optimizes unitary operators and non-unitary – dense or sparse – operators using only a single ancilla qubit for block encoding. Additionally, we introduce a regularization term that reduces the approximation error. The approach is validated for both quantum mechanical and engineering applications. In the former case, we learn propagators that arise in native quantum problems – such as quantum simulation and quantum chemistry – and achieve improved resource scaling in comparison to standard Suzuki-Trotter expansions. In the latter case, we demonstrate the approach's ability to implement the second-order central finite difference approximation of the Laplace operator – relevant for solving partial differential equations – while improving upon current error metrics. The final example deals with learning a dense, non-unitary operator that arises in the analysis of inviscid potential flow around an airfoil. This universality of the framework opens the door for solving general problems beyond prototypical engineering and quantum applications.

13.
arXiv (CS.LG) 2026-06-12

Smarter Saboteurs, Better Fixers: Scaling & Security in Linear Multi-Agent Workflows

arXiv:2606.12709v1 Announce Type: cross Abstract: As LLM-based multi-agent systems (MAS) are deployed in the wild, the resilience of their collaboration structures against adversarial compromise becomes a critical safety concern. Attackers may leverage prompt-injection or jailbreaking to sabotage individual agents within MAS workflows, but the interaction between model scaling and system-level resilience remains poorly understood. This paper investigates how model scale affects the security of linear multi-agent workflows. Our experiments across scales of two open-weight model families on the HumanEval benchmark reveal a compliance-correction symmetry: larger models are far more likely to faithfully execute malicious instructions, with the control-to-malicious performance drop reaching 53.7pp at 27B in uncorrected pipelines. However, appending a lightweight terminal Fixer stage collapses this to 0.6pp and restores statistical parity with control-level performance, demonstrating that strictly linear collaboration structures can be viable and resilient to adversaries at this scale, and suggesting that the brittleness previously attributed to linear topology may stem from a lack of correction.

14.
arXiv (quant-ph) 2026-06-11

Fast Adiabatic Quantum Gates via Hyperfine Intermediate States

arXiv:2606.11655v1 Announce Type: new Abstract: The appeal of adiabatic quantum computing lies in its intrinsic robustness against various technical imperfections, making it attractive for many quantum information applications. However, it faces a fundamental challenge: accelerating the adiabatic operations while preserving adiabaticity within the qubit coherence time. In this article, we propose an electromagnetically induced transparency-based adiabatic CNOT gate protocol which harnesses atomic hyperfine intermediate states (HISs) to speed up the adiabatic evolution. The HISs, naturally-existed in two-photon transitions, often need to be suppressed due to their significant decay errors. In contrast, this paper introduces a novel method that utilizes appropriately chosen HISs not only to enhance the adiabaticity in STAY pathway but also to accelerate the population transfer in TRANSFER pathway. Through pulse optimization, we achieve adiabatic gate fidelities exceeding 0.9991 within 0.3903 {\mu}s in realistic Cs atomic setups. To demonstrate the generality of protocol we further assess the impact of decays from multiple HIS and extend our model to arbitrary number of states, providing a practical route toward fast and robust adiabatic quantum gates in Rydberg-atom platforms.

15.
arXiv (CS.CL) 2026-06-16

HyDRA: Hybrid Dynamic Routing Architecture for Heterogeneous LLM Pools

Production LLM deployments increasingly maintain heterogeneous model pools spanning order-of-magnitude cost differences. Existing routers make binary strong-vs-weak decisions and couple learned parameters to specific model identities, requiring retraining whenever the catalog changes. We present HyDRA (Hybrid Dynamic Routing Architecture), a framework that predicts fine-grained, multi-dimensional capability requirements per query and matches them against configuration-defined model profiles via shortfall matching. A ModernBERT encoder with K=4 independent sigmoid heads scores each query along reasoning, code generation, debugging, and tool use; a shortfall-matching algorithm then selects the cheapest model whose capabilities meet the predicted requirements. The deployed predictor runs at 86 ms median CPU inference latency in production, and is fully decoupled from the model catalog – adding or removing models requires only a configuration change, with zero retraining. On SWE-Bench Verified (5-model pool: GPT-5.4-mini, Claude Haiku 4.5, GPT-5.3 Codex, Claude Sonnet 4.6, GPT-5.4), HyDRA's tunable shortfall threshold spans three regimes: peak-quality exceeds the always-strong Claude Sonnet 4.6 baseline (75.4% vs. 74.2% resolution) at 12.9% cost savings; iso-quality matches Sonnet at 54.1% cost savings, a 6x improvement over our prior in-house binary router at 9.1%; aggressive pushes savings to 72.5% for a 3.2-point quality trade. Results generalize across LiveCodeBench, BigCodeBench, and tau-bench. HyDRA is deployed to all users in GitHub Copilot's VS Code Chat auto-mode and – to our knowledge for the first time in the LLM routing literature – demonstrates language-invariant routing across CJK, European, and other script families.

16.
arXiv (CS.CV) 2026-06-16

Clinically Aware Synthetic Image Generation for Concept Coverage in Chest X-ray Models

Deep learning models for chest X-ray diagnosis are constrained by limited coverage of clinically meaningful concept combinations in publicly available training datasets. While synthetic image generation has been explored to increase data diversity, existing methods rarely enforce clinical or anatomical constraints, limiting utility for improving model reliability. We propose CARPA, a clinically aware and anatomically grounded framework for synthetic chest X-ray generation that applies targeted perturbations to clinical concept vectors while preserving anatomical structure. By producing anatomically faithful synthetic images with controlled concept insertions and deletions, CARPA expands clinically relevant concept coverage. We evaluate CARPA across seven backbone architectures by fine-tuning models on synthetic subsets and testing on a held-out MIMIC-CXR benchmark. Compared to prior concept perturbation approaches, fine-tuning on CARPA-generated images consistently improves precision-recall performance, reduces predictive uncertainty, and improves model calibration. Structural and semantic analyses demonstrate high anatomical fidelity, strong concept alignment, and low semantic uncertainty. Evaluation by two expert radiologists further confirms realism and clinical agreement. Together, these results show that anatomically grounded concept perturbations enable more effective use of synthetic data, improving both performance and reliability of chest X-ray classification models and supporting safer clinical deployment.

17.
arXiv (CS.AI) 2026-06-16

APEX: Adaptive Principle EXtraction A Three-Layer Self-Evolution Framework for Production AI Agents

arXiv:2606.15363v1 Announce Type: new Abstract: Self-improvement in AI agents has emerged as a key research frontier: systems that modify their own prompts, workflows, and decision rules based on accumulated operational experience. The state-of-the-art Self-Harness framework [1] achieves 14–21% improvement on Terminal-Bench-2.0 by mining failure clusters and patching the agent harness. However, Self-Harness optimises only one dimension – the prompt harness – leaving behavioural principles and workflow topology unchanged. We propose APEX (Adaptive Principle EXtraction), a three-layer co-evolution framework that simultaneously evolves: (L1) the harness via failure-mode patching, (L2) behavioural principles via success-trace distillation [2], and (L3) the agent workflow topology via structural fitness-based selection [6]. We implement APEX on Joe [13], a production-grade super AI Agent built on NVIDIA Nemotron and designed as an Edge AI Agent Factory for the NVIDIA Agent Challenge 2026, managing a 15-node compute fleet using 114 real task traces collected over 18 days. APEX achieves an APEX Health Score of 0.570 (+90% vs. baseline 0.300) in a single evolutionary run, distilling 6 novel reusable principles and selecting a research-first workflow topology scoring 0.900 (+20%). Our results demonstrate that multi-dimensional co-evolution substantially outperforms single-axis harness optimisation, at a cost of only 4 LLM calls (~270 s) on a local qwen2.5-coder:32b instance.

18.
arXiv (CS.CV) 2026-06-12

Surflo: Consistent 3D Surface Flow Model with Global State

Geometry is invariant to viewpoint, which makes any collection of images a redundant encoding of a single 3D state. Existing feed-forward reconstruction models fail to exploit this: per-view methods emit overlapping, unaligned pointmaps that grow linearly with input count, while global-latent methods commit to a fixed, low-resolution output. We introduce Surflo, which compresses a variable number of unposed RGB views into K latent tokens-one global state-and decodes oriented 3D surface points by independently transporting them from noise onto the surface via flow matching. This frees the output from any fixed grid or token budget: the same latent yields from a few thousand to a million points in a single forward pass. To suppress the local inconsistencies inherent to independent per-point decoding, an inference-time guidance term correlates nearby points by injecting a photometric gradient during ODE integration. Surflo matches or surpasses feed-forward baselines on surface metrics, runs an order of magnitude faster than optimization-based methods that require hundreds of views, and is the only feed-forward approach to combine a global latent with arbitrary-resolution decoding.

19.
arXiv (CS.AI) 2026-06-16

Fine-Tuning a 7B Advisor on Free-Tier GPUs: An Adapter-Handoff Recipe and a Synthetic-Data Reliability Caution

arXiv:2504.15610v4 Announce Type: replace Abstract: Fine-tuning a 7B language model for specialized advising is attractive in resource-constrained settings, but multi-epoch runs routinely exceed the wall-clock limits of the free-tier GPUs (Kaggle, Colab) such users rely on. We report two things. First, a practical recipe: a three-epoch QLoRA fine-tune of Mistral-7B-Instruct-v0.3 (4-bit NF4, LoRA rank 16, via Unsloth) completed across two free-tier 16 GB GPUs (Tesla P100 then T4) by checkpointing only the small LoRA adapter (41.9M parameters) and resuming on the second machine. Adapter-only handoff is sufficient – optimizer and scheduler state need not be transferred – so the binding constraint is per-step VRAM and per-session wall-clock, not aggregate compute. Second, and more importantly, an honest evaluation that returns a cautionary result. On a blind held-out comparison against the un-fine-tuned base model, the fine-tuned model scored higher on similarity to the synthetic training distribution (BERTScore F1 +0.063, a fidelity not quality signal) but lower on advising quality: a blind LLM-as-judge preferred the base model on 46% of prompts versus 18%, and a source-verified factuality audit found four confident errors from the fine-tuned model on policy-sensitive topics against zero for the base. Auditing the training data with the same method, we find this is not a fine-tuning artifact: each audited error is already present in the Gemini-generated training answers, and a random-sample audit finds verifiable errors in a sizable fraction of responses (28-40%; single-judge, n=40). The data is therefore sufficient to account for the errors, which we attribute to the synthetic-data pipeline rather than the adapter-handoff method. We release the dataset, adapter, cross-GPU notebooks, and full evaluation harness so every result reproduces on a single 16 GB GPU.

20.
arXiv (CS.CV) 2026-06-11

SG2Loc: Sequential Visual Localization on 3D Scene Graphs

Visual localization in complex indoor environments remains a critical challenge for robotics and AR applications. Sequential localization, where pose estimates are refined over time, is important for autonomous agents. However, traditional methods often require storing extensive image databases or point clouds, leading to significant overhead. This paper introduces a novel, lightweight approach to sequential visual localization using 3D scene graphs. Our method represents the environment with a compact scene graph, where nodes represent objects (with coarse meshes) and edges encode spatial relationships. For each image in the localization phase, we extract per-patch semantic features, predicting object identities. Localization is performed within a particle filter framework. Each particle, representing a camera pose, projects the coarse object meshes from the scene graph into the image, assigning object identities to patches based on visibility. The similarity of the per-patch features, in the input image, and object features from the scene graph determines the weight of a particle. Subsequent images are incorporated sequentially, refining the pose estimate. By leveraging a compact scene graph and efficient semantic matching, our method significantly reduces storage while maintaining performance on real-world datasets. The code will be available at https://github.com/DmblnNicole/sg2loc.

21.
arXiv (quant-ph) 2026-06-15

On-site interactions in quantum thermal machines: efficiency, rectification and entanglement beyond local and global master equations

arXiv:2606.14593v1 Announce Type: new Abstract: Advances in experimental techniques have opened new routes for harnessing non-equilibrium dynamics in mesoscopic quantum systems. In this context, we study the impact of on-site interactions on the transport properties of a continuous quantum thermal machine composed of two coupled oscillators connected to two thermal reservoirs. In the weak system-reservoir coupling regime, where a long-standing debate concerns which reduced description should be preferred, we first show that the Redfield master equation (RME) provides an accurate and unifying framework that interpolates between two well-known limits: the local and global master equations. By relying on the Hierarchy of Pure States (HOPS), a numerically exact stochastic method, we then explore the full parameter space and show that interactions can be leveraged to tune the efficiency of the thermal machine at high temperatures (while leaving it essentially unchanged at low temperatures), induce non-reciprocal transport under asymmetric reservoir couplings, and generate steady-state entanglement within the junction. We derive expressions for system-bath correlators, such as heat and particle currents, consistently across different frameworks. Our work features on-site interactions to enhance the versatility of quantum thermodynamic junctions and clarifies the role of non-Markovianity and non-linearities in quantum transport.

22.
arXiv (CS.CV) 2026-06-17

TextMesh4D: Zero-shot Text-to-4D Mesh Generation

Large-scale, high-quality dynamic 3D (4D) assets are essential for learning physically grounded representations, but remain costly to capture and annotate at scale. This limits the viability of supervised 4D learning and motivates zero-shot text-to-4D generation leveraging pretrained diffusion priors. To model complex dynamics, prior methods typically adopt implicit 3D representations (e.g., NeRFs or 3DGS) for their deformation capacity. However, their implicit nature provides limited control over surface topology, which hinders high-fidelity geometry and makes temporally coherent surface reconstruction challenging. To address these limitations, we explore zero-shot text-to-4D mesh generation. However, a structural mismatch arises when combining diffusion-based guidance with topology-constrained meshes: the guidance is noisy and spatially inconsistent, while meshes impose severe topological constraints, making direct vertex-level deformation unstable. In this paper, we introduce TextMesh4D, the first zero-shot framework for text-to-4D that directly generates dynamic meshes by addressing the above challenge at two complementary levels. Geometrically, we shift deformation modeling from vertices to faces via a Jacobian Deformation Field (JDF), enabling topology-aware surface reconstruction through an integrability-enforcing integration formulation. Semantically, we propose a Local-Global Semantic Regularizer (LGSR) that preserves identity over time by jointly constraining local deformation plausibility and global shape consistency. Extensive experiments demonstrate state-of-the-art temporal consistency, structural fidelity, and visual quality, while remaining efficient on a single 24GB GPU.

23.
arXiv (CS.AI) 2026-06-16

Sensory Restoration via Brain-Computer Interfaces: A Unified 2 x 2 Framework and Convergence Roadmap

arXiv:2606.15091v1 Announce Type: cross Abstract: Millions of individuals worldwide suffer from sensory and communication deficits caused by neurodegenerative diseases, stroke, or trauma. Brain-computer interfaces (BCIs) offer a promising avenue for sensory and motor restoration. However, the scientific literature remains highly fragmented between invasive neuroprosthetics and non-invasive electrophysiological decoders, with a lack of consistent terminology and comparison metrics. This chapter proposes a unified 2 x 2 framework categorizing BCIs along two axes: degree of invasiveness (invasive vs. non-invasive) and signal direction (afferent sensory-IN vs. efferent sensory-OUT). We define and distinguish the paradigms of restoration, substitution, and augmentation. Furthermore, we outline a structural roadmap for the convergence of these modalities over near-, medium-, and long-term horizons, focusing on physical limits and the integrative role of machine learning foundation models.

24.
arXiv (CS.CV) 2026-06-19

DeepForestVisionV2: Ecology-Driven Taxonomy Expansion for Camera-Trap Monitoring in African Tropical Forests

Camera-trap monitoring in African tropical forests increasingly extends beyond closed-canopy interiors to riverbanks, clearings, and park edges. Among available open tools for African forest camera-trap classification, DeepForestVision is the only one providing a matched offline workflow for both photographs and videos, and previous work showed that it outperformed other available baselines on a comparable benchmark. However, it was designed for closed-canopy, ground-level forest interiors and uses a 35-class prediction space that becomes too coarse when deployments encounter arboreal primates, birds, semi-aquatic taxa, or human-associated confounders such as livestock. We present DeepForestVisionV2, an ecology-driven expansion from 35 to 64 prediction classes (61 animal classes plus human, vehicle, and blank) designed to address three recurrent deployment gradients: vertical stratification, scene openness, and anthropogenic interfaces. DeepForestVisionV2 retains the same offline workflow and is trained on 1,535,010 photographs and 243,354 videos from multi-country African tropical-forest projects. Evaluation combines a cross-country cropped-photo validation set, used to assess robustness across sites and camera-trap settings, with three held-out Uganda video benchmarks spanning the targeted gradients. On the validation set, DeepForestVisionV2 reaches 0.86 accuracy, 0.82 macro-F1, and 0.81 balanced accuracy. On the deployment benchmarks, it preserves or improves baseline accuracy despite its harder classification task, while increasing the number of identified taxa from 22 to 29 in forest-interior videos and from 4 to 9 at riverbanks. In the park-edge use case, it raises accuracy from 0.62 to 0.86 and reduces false alarms from 11 to 0. These results show that DeepForestVisionV2 materially improves field utility while preserving robustness across sites, habitats, and camera-trap settings.

25.
arXiv (CS.LG) 2026-06-15

Arbitrary control over multimode wave propagation for machine learning

arXiv:2402.17750v2 Announce Type: replace-cross Abstract: Controlled multimode wave propagation can enable more space-efficient photonic processors than architectures based on discrete components connected by single-mode waveguides. Instead of defining discrete elements, one can sculpt the continuous substrate of a photonic processor to perform computations through multimode interference in two dimensions. Here we designed and demonstrated a device with a refractive index that can be rapidly reprogrammed across space, allowing arbitrary control of wave propagation. The device, a two-dimensional programmable waveguide, uses parallel electro-optic modulation of the refractive index of a slab waveguide with about $10^4$ programmable spatial degrees of freedom. We implemented neural network inference on benchmark tasks with up to $49$-dimensional vectors in a single pass, without digital pre-processing or post-processing. Theoretical and numerical analyses further indicated that two-dimensional programmable waveguides may offer not only a constant-factor reduction in device area but also a scaling benefit, with the area required growing as $N^{1.5}$ rather than $N^2$.