Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-17

Decidable By Construction: Design-Time Verification for Trustworthy AI

arXiv:2603.25414v4 Announce Type: replace-cross Abstract: A prevailing assumption in machine learning is that model correctness must be enforced after the fact. We observe that the properties determining whether an AI model is numerically stable, computationally correct, or consistent with a physical domain do not necessarily demand post hoc enforcement. They can be verified at design time, before training begins, at marginal computational cost, with particular relevance to models deployed in high-leverage decision support and scientifically constrained settings. These properties share a specific algebraic structure: they are expressible as constraints over finitely generated abelian groups $\mathbb{Z}^n$, where inference is decidable in polynomial time and the principal type is unique. A framework built on this observation composes three prior results (arXiv:2603.16437, arXiv:2603.17627, arXiv:2603.18104): a dimensional type system carrying arbitrary annotations as persistent codata through model elaboration; a program hypergraph that infers Clifford algebra grade and derives geometric product sparsity from type signatures alone; and an adaptive domain model architecture preserving both invariants through training via forward-mode coeffect analysis and exact posit accumulation. We believe this composition yields a novel information-theoretic result: Hindley-Milner unification over abelian groups computes the maximum a posteriori hypothesis under a computable restriction of Solomonoff's universal prior, placing the framework's type inference on the same formal ground as universal induction. We compare four contemporary approaches to AI reliability and show that each imposes overhead that can compound across deployments, layers, and inference requests. This framework eliminates that overhead by construction.

02.
arXiv (CS.CL) 2026-06-16

JE-IRT: A Geometric Lens on LLM Abilities through Joint Embedding Item Response Theory

Standard LLM evaluation practices compress diverse abilities into single scores, obscuring their inherently multidimensional nature. We present JE-IRT, a geometric item-response framework that embeds both LLMs and questions in a shared space. For question embeddings, the direction encodes semantics and the norm encodes difficulty, while correctness on each question is determined by the geometric interaction between the model and question embeddings. This geometry replaces a global ranking of LLMs with topical specialization and enables smooth variation across related questions. Building on this framework, our experimental results reveal that out-of-distribution behavior can be explained through directional alignment, and that larger norms consistently indicate harder questions. Moreover, JE-IRT naturally supports generalization: once the space is learned, new LLMs are added by fitting a single embedding. The learned space further reveals an LLM-internal taxonomy that only partially aligns with human-defined subject categories. We also show that simple linear probes of the embedding space recover cross-subject ability directions, such as an arithmetic axis that highlights quantitatively demanding questions in seemingly distant subjects like virology and global facts. JE-IRT thus establishes a unified and interpretable geometric lens that connects LLM abilities with the structure of questions, offering a distinctive perspective on model evaluation and generalization.

03.
arXiv (CS.AI) 2026-06-11

RoboNaldo: Accurate, Stable and Powerful Humanoid Soccer Shooting via Motion-Guided Curriculum Reinforcement Learning

arXiv:2606.11092v2 Announce Type: replace-cross Abstract: Elite humanoid soccer shooting requires whole-body stability, high-impulse whole-body interactions, and accuracy to targets. Motion tracking-driven reinforcement learning (RL) provides stability in whole-body movement coordination, but a fixed reference makes it hard to adapt to varied ball positions and strike timings; in contrast, task reward-driven RL struggles to explore and discover valid kicks from scratch. We therefore introduce RoboNaldo, a three-stage motion-guided curriculum RL framework for high-impulse humanoid interaction. A single human-kick reference is used as a scaffold and progressively shifts optimization towards shooting performance. The curriculum first learns a stable whole-body kicking prior, then adapts the kick to free-kick settings where the ball is stationary at random positions, and finally extends it to moving-ball shooting through a locomotion-command and kick-trigger interface. A high-level heuristic planner controls this interface during training, while alternative high-level controllers can drive the same low-level policy at inference. In simulation, RoboNaldo demonstrates free-kick shot error 48.6% lower and shoot velocity 2.96x than prior work baselines. In real world on a Unitree G1 with onboard perception, RoboNaldo attains 0.73 m and 0.86 m average target shooting error from 3 m away in free-kick and moving-ball cases, accordingly. And the post-contact ball velocity reaches 13.10 m/s, which is 59-71% of reported professional open-play shot speed. Project page: https://opendrivelab.com/RoboNaldo.

04.
arXiv (quant-ph) 2026-06-17

Stochastic signal sensing with finite energy and dead time at the fundamental quantum limit

arXiv:2606.18133v1 Announce Type: new Abstract: State preparation, measurement, and reset operations take finite time and use finite energy in realistic experiments, yet the impact of this on optimal quantum metrological protocols is not properly understood. We study the effect on sensing a stochastic signal, relevant for the detection of ultralight dark matter and other searches for fundamental physics. We prove that two-mode squeezed vacuum is the optimal probe state given a finite mean-energy constraint for a family of incoherent sensing problems, including noise sensing and quantum illumination. For estimating a gain independent of a loss, we show that entanglement is a required resource to achieve the fundamental quantum limit and observe a non-Gaussian to Gaussian transition in the optimal unentangled state as the dead time increases. We apply our results to bulk acoustic wave resonators.

05.
arXiv (CS.AI) 2026-06-15

Securing the Future of IoMT in the Post-Quantum Era: An Edge-Native Federated Learning Approach

arXiv:2606.14515v1 Announce Type: cross Abstract: Internet of Medical Things (IoMT) devices operate under strict resource constraints while handling highly sensitive health data, making security and privacy critical concerns. Federated learning (FL) further complicates this landscape, as model updates exchanged during training may unintentionally expose private medical information. Emerging quantum computing capabilities threaten the long-term viability of conventional lightweight cryptographic mechanisms, motivating the integration of Post-Quantum Cryptography (PQC) into IoMT systems. This article discusses key enabling technologies for quantum-resilient IoMT, including post-quantum key establishment, lightweight encryption, and edge-native orchestration. We propose a scalable Kubernetes-based framework that integrates PQC into FL-enabled IoMT environments and validate it on a Raspberry Pi testbed. Results demonstrate that distributed cryptographic processing significantly reduces latency compared to sequential designs while maintaining feasible resource overhead. The primary contribution of this work lies in the design and validation of a secure orchestration and communication framework for FL-enabled IoMT systems. We conclude by outlining future directions toward energy-aware architectures, intelligent security optimization, and resilient next-generation Intelligent Internet of Medical Things (IIoMT) ecosystems.

06.
arXiv (CS.CV) 2026-06-12

Modality-Aware Feature Matching in Visual and Vision-Language Applications: A Comprehensive Survey

Feature matching is a cornerstone task in computer vision, essential for applications such as image retrieval, stereo matching, 3D reconstruction, and SLAM. This survey comprehensively reviews modality-based feature matching, exploring traditional handcrafted methods and emphasizing contemporary deep learning approaches across various modalities, including RGB images, depth images, 3D point clouds, LiDAR scans, medical images, and vision-language interactions. Traditional methods, leveraging detectors like Harris corners and descriptors such as SIFT and ORB, demonstrate robustness under moderate intra-modality variations but struggle with significant modality gaps. Contemporary deep learning-based methods, exemplified by detector-free strategies like CNN-based SuperPoint and transformer-based LoFTR, substantially improve robustness and adaptability across modalities. We highlight modality-aware advancements, such as geometric and depth-specific descriptors for depth images, sparse and dense learning methods for 3D point clouds, attention-enhanced neural networks for LiDAR scans, and specialized solutions like the MIND descriptor for complex medical image matching. Cross-modal applications, particularly in medical image registration and vision-language tasks, underscore the evolution of feature matching to handle increasingly diverse data interactions.

07.
medRxiv (Medicine) 2026-06-22

Spatial Analysis and Multilevel Determinants of Hypertension in Zambia: Analysis of the 2017 WHO STEPS Survey

Background: Hypertension is the leading modifiable cardiovascular risk factor globally, with the fastest-growing burden in low- and middle-income countries. This study aimed to estimate national hypertension prevalence, map provincial patterns, assess spatial clustering, and identify individual and community-level determinants among Zambian adults using the 2017 WHO STEPS survey. Methods: This cross-sectional study used data from the 2017 WHO STEPS survey, a nationally representative sample of 4,301 adults aged 18-69 years. Hypertension was defined as systolic BP [&ge;]140 mmHg, diastolic BP [&ge;]90 mmHg, or current antihypertensive use. Spatial autocorrelation was assessed via Moran's I and LISA. Four nested generalised linear mixed models with PSU-level random intercepts identified individual and community-level determinants. Results: Overall weighted hypertension prevalence was 24.0%. Lusaka recorded the highest prevalence (30.2%), followed by Southern (29.9%) and Muchinga (28.3%) provinces; Western Province had the lowest (12.4%). Spatial clustering was statistically significant but modest (Moran's I = 0.0247, p < 0.001). Between-cluster variation reduced from ICC = 5.9% to 1.8% in the full model, indicating geographic differences were largely explained by individual characteristics. Age was the strongest predictor; adults aged 60-69 had nearly sevenfold higher odds than those aged 18-29 (AOR 6.92, 95% CI: 4.95-9.66). Women had lower odds than men (AOR 0.64, 95% CI: 0.52-0.79). Obesity (AOR 2.34), overweight (AOR 1.65), high cholesterol (AOR 1.40), diabetes (AOR 1.35), and single marital status (AOR 1.34) were independently significant. Western Province showed consistently lower odds than Central Province (AOR 0.48). Conclusion: Hypertension affects one in four Zambian adults, driven primarily by age, sex, obesity, dyslipidaemia, and diabetes. Geographically prioritised interventions, including community health worker-led screening programmes in Lusaka and Southern Province, would maximise population-level impact. Population-level salt reduction and alcohol policies represent cost-effective complementary strategies. Longitudinal studies with finer spatial resolution are needed to clarify causal pathways underlying observed geographic clustering and inform SDG Target 3.4 progress.

08.
arXiv (CS.CV) 2026-06-19

TriFlow: Generating Artist-Like 3D Mesh Topology via Nearest-Vertex Vector Fields

We present TriFlow, a new generative approach for producing compact 3D meshes with artist-like triangle topology directly from input geometry conditions such as signed distance fields. Our key insight is to represent mesh topology as a nearest-vertex vector field (NVF) defined over the surface, where each point encodes its association to the nearest triangle vertex in the local barycentric frame. We train a latent flow-matching model to synthesize this field, enabling topology generation conditioned on the input geometry. To extract a coherent mesh, we cluster surface regions using the generated NVF and guide a constrained quadric error metric (QEM) mesh simplification with topology-aware optimization. This yields output meshes that closely match the input geometry while exhibiting structured, artist-like connectivity. Experiments demonstrate that TriFlow achieves stronger generalization and significantly improved topology quality compared to state-of-the-art learning-based approaches, alongside 90% lower Chamfer Distance and an 8x speedup.

09.
arXiv (CS.CL) 2026-06-16

GePBench: Evaluating Fundamental Geometric Perception for Multimodal Large Language Models

Geometric shapes play important roles in both physical world and human cognition. While multimodal large language models (MLLMs) have made significant advancements in visual understanding, their abilities to recognize geometric shapes and their spatial relationships, which we term geometric perception, are not explicitly and systematically explored. To address this gap, we introduce GePBench, a novel benchmark specifically designed to assess the geometric perception capabilities of MLLMs. Our extensive evaluations reveal that even the current state-of-the-art MLLMs exhibit significant deficiencies in geometric perception tasks. Furthermore, we show that models trained with GePBench data demonstrate considerable improvements on a wide range of downstream tasks, highlighting the critical role of geometric perception in enabling advanced multimodal applications. Our code and datasets are available at \href{https://github.com/Changhao-Xiang/GePBench}{https://github.com/Changhao-Xiang/GePBench}.

10.
arXiv (CS.CV) 2026-06-19

CoMo: Learning Continuous Latent Motion from Internet Videos for Scalable Robot Learning

Unsupervised learning of latent motion from Internet videos is crucial for robot learning. Existing discrete methods generally mitigate the shortcut learning caused by extracting excessive static backgrounds through vector quantization with a small codebook size. However, they suffer from information loss and struggle to capture more complex and fine-grained dynamics. Moreover, there is an inherent gap between the distribution of discrete latent motion and continuous robot action, which hinders the joint learning of a unified policy. We propose CoMo, which aims to learn more precise continuous latent motion from internet-scale videos. CoMo employs an early temporal difference (Td) mechanism to increase the shortcut learning difficulty and explicitly enhance motion cues. Additionally, to ensure latent motion better captures meaningful foregrounds, we further propose a temporal contrastive learning (Tcl) scheme. Specifically, positive pairs are constructed with a small future frame temporal offset, while negative pairs are formed by directly reversing the temporal direction. The proposed Td and Tcl work synergistically and effectively ensure that the latent motion focuses better on the foreground and reinforces motion cues. Critically, CoMo exhibits strong zeroshot generalization, enabling it to generate effective pseudo action labels for unseen videos. Extensive simulated and real-world experiments show that policies co-trained with CoMo pseudo action labels achieve superior performance with both diffusion and auto-regressive architectures.

11.
medRxiv (Medicine) 2026-06-12

Sociodemographic and health correlates of reimbursement authorizations for cannabis for medical purposes in Canadian veterans: A cross-sectional study linking the Life After Services Studies 2019 and Health Administrative Databases

Background Evidence on factors associated with cannabis for medical purposes (CMP) authorizations among Veterans Affairs Canada (VAC) clients remains limited and inconsistent, particularly concerning mental health and posttraumatic stress disorder (PTSD), a leading indication for use. We investigated demographic, clinical and service characteristics associated with VAC authorizations for CMP reimbursement. Method We linked VAC administrative CMP program data with responses from the 2019 Life After Services Studies cross-sectional survey of Regular Force veterans released between 1998 and 2018. Multivariable logistic regressions examined associations between CMP reimbursement (yes/no) and demographic, clinical and well-being factors, with analyses stratified by PTSD status. Results Among 1,289 respondents (weighted n=33,131), 18.4% were authorized for CMP reimbursement. Younger age (

12.
arXiv (CS.AI) 2026-06-15

Causal Object-Centric Models for Planning with Monte Carlo Tree Search

arXiv:2606.14418v1 Announce Type: new Abstract: We introduce COMET (Causal Object-centric Model for Efficient Tree search), a model-based reinforcement learning algorithm that performs Monte Carlo Tree Search in a slot-structured latent space. COMET pairs a frozen unsupervised object-centric encoder with a transformer-based world model, in which actions are bound to objects through a novel action-slot fusion mechanism that is used in slot transition prediction. Policy and value heads use object-causal attention, modulating token interactions by learned per-slot relevance scores so that decision-making concentrates on task-relevant entities. COMET adds an explicit object-level inductive bias to MuZero-style latent planning. Across eight visually and dynamically diverse tasks from the Object-Centric Visual RL benchmark, ManiSkill, Robosuite, and VizDoom, COMET achieves a higher mean normalized score during the early stages of training compared to object-centric and monolithic baselines.

13.
arXiv (CS.CL) 2026-06-17

ConSA: Controllable Sparsity in Hybrid Attention via Learnable Allocation

Hybrid architectures combining full attention (FA) and sliding-window attention (SWA) are a promising paradigm for efficient LLM inference. However, existing methods typically rely on hand-crafted rules or simple post-hoc heuristics for FA/SWA allocation and offer limited analysis of the attention behaviors underlying these designs. We propose Controllable Sparsity in Hybrid Attention (ConSA), a framework that learns optimal FA/SWA assignment under a user-specified sparsity target. ConSA employs L0 regularization to learn binary masks selecting between FA and SWA for each attention unit, while an augmented Lagrangian constraint enforces the target sparsity at either layer or KV-head granularity. We evaluate ConSA on two LLMs at the 0.6B and 1.7B scales. Learned allocations consistently outperform rule-based baselines, with KV-head-wise allocation yielding clear gains over layer-wise allocation. The learned patterns place SWA in the bottom layers and concentrate FA into contiguous middle-layer blocks, diverging from evenly interleaved patterns in rule-based methods. This structure persists across model scales, sparsity levels, and allocation granularities, revealing a fine-grained spectrum of intrinsic attention behaviors that underlies the learned allocation.

14.
arXiv (CS.LG) 2026-06-16

CacheMuon: Using Temporal Preconditioning To Approximate Polar Factor

arXiv:2606.16371v1 Announce Type: new Abstract: Muon is an optimizer that computes updates using the polar factor of the momentum matrix and has shown strong empirical performance across a range of training settings. A key component of Muon is the Newton-Schulz iteration used to compute this polar factor. Although this avoids the cost of an exact singular value decomposition, it remains expensive in practice because it is applied at every optimization step. At the same time, the momentum matrix changes smoothly over training, suggesting strong temporal correlation in the corresponding polar factors. In this paper, we exploit this structure and propose CacheMuon, a temporal preconditioning method that reuses information from previous optimization steps to approximate the polar factor at the current step. This reduces redundant orthogonalization computation across iterations. We analyze CacheMuon as an inexact Muon update, with error controlled by fresh-solver error and cache staleness. Empirically, CacheMuon provides a controllable quality-efficiency frontier: conservative thresholds closely match fresh Muon on language-model and vision training while reducing orthogonalization FLOPs, whereas more aggressive thresholds yield larger arithmetic savings at the cost of modest validation-quality degradation.

15.
arXiv (quant-ph) 2026-06-19

String dynamics of a (2+1)D U(1) quantum link model on a digital quantum computer

arXiv:2606.19601v1 Announce Type: new Abstract: The (2+1)D U(1) pure gauge theory always exists in the confining phase, with strings of non-zero string tension giving a characteristic linear potential between static charges. This makes it a useful testing ground for quantum computing methods designed to study string dynamics of confining gauge theories. Here we implement a minimal U(1) quantum link model on a quantum computer with qubit degrees of freedom representing the dual height variables of the model. This facilitates an efficient realization of plaquette interactions and enables effective calculations of real-time dynamics that are inaccessible to traditional quantum Monte Carlo. A specifically tailored lattice geometry is chosen to match the heavy-hexagonal geometry of the IBM quantum hardware used here, minimizing non-adjacent qubit interactions. By performing quantum quenches from a simple initial string state, we probe the transverse quantum fluctuations of the string before it thermalizes. Our experimental results from digital quantum simulations, with up to 112 qubits, show good agreement with reference tensor-network calculations at short times and with thermal averages at long times. Near the phase transition, the quench dynamics exhibit large fluctuations of the initial string that extend across both spatial dimensions of the lattice. Nonetheless, our error-mitigated estimators from the quantum hardware also give accurate predictions in that regime, with noise-induced violations of local gauge symmetries comparable to finite-bond-dimension tensor-network results.

16.
arXiv (quant-ph) 2026-06-15

Certifying Macroscopic Quantum Mechanics via Hypothesis Testing with Finite Data

arXiv:2506.22092v2 Announce Type: replace Abstract: We address the challenge of certifying quantum behavior with single macroscopic massive particles, subject to decoherence and finite data. We propose a hypothesis testing framework that distinguishes between classical and quantum mechanics based on position measurements. While interference pattern visibility in single-particle quantum superposition experiments has been commonly used as a sufficient criterion to falsify classical mechanics, we show that, from a hypothesis testing perspective, it is neither necessary nor efficient. Focusing on recent proposals to prepare macroscopic superposition states of levitated nanoparticles, we show that the likelihood ratio test – which leverages differences across the entire probability distribution – provides an exponential reduction in measurements needed to reach a given confidence level. These results generalize to a broad class of quantum states, and offer a principled, efficient method to falsify classical mechanics in interference experiments, relaxing the experimental constraints faced by current efforts to test quantum mechanics at the macroscopic scale.

17.
arXiv (CS.CV) 2026-06-16

MVM-IOD: An Industrial Object-Centric Benchmark Dataset for the Evaluation of 3D Reconstruction Methods

3D object reconstruction, and camera pose estimation in industrial applications are challenging tasks, as errors are costly while the computation time is often limited. The complexity of typical industrial objects further complicates these tasks. Most of the existing datasets in this context do not depict realistic industrial scenarios. Therefore, we introduce the Machine Vision Metrology Industrial Object Dataset (MVM-IOD). Images of typical industrial objects are captured systematically, by moving a camera, mounted at the end effector of an industrial robot arm, on a hemisphere around the objects. MVM-IOD contains reference camera poses and reference 3D point clouds, the acquired RGB images of 9 objects and 2 background choices resulting in 18 scenes, which allows evaluation of all image based methods that compute a 3D reconstruction, camera poses, or novel views of a scene. Based on MVM-IOD, we extensively evaluate current SOTA 3D reconstruction and camera pose estimation methods, such as Structure from Motion, Multi-View Stereo, recent feed forward methods (Visual Geometry Grounded Transformer, {\pi}3), and 2D Gaussian Splatting and report our findings as a baseline for future research. The experiments show that capture setups like ours generate out-of distribution images for feed forward methods, leading to suboptimal point clouds and camera poses. However, these out-of-distribution images can be shifted closer to the training distribution by applying simple preprocessing steps. Consequently, in certain industrial applications, feed forward methods should be used with caution.

18.
arXiv (CS.LG) 2026-06-19

A Differentiable Composite Approximation Framework for Autonomous Underwater Vehicle Maneuvering Modeling from Sea-Trial Data

arXiv:2606.19711v1 Announce Type: cross Abstract: Field-based modeling from onboard measurements can produce autonomous underwater vehicle (AUV) maneuvering models that reflect real operating characteristics. From an approximation perspective, conventional maneuvering models use predefined constraint polynomial bases, whereas data-driven models use data-adaptive bases. Motivated by this basis-function view, this paper presents a differentiable composite-approximation formulation, in which the polynomial-basis component and the data-adaptive basis component are treated as differentiable parts of a single predictor and calibrated jointly. A gradient-based co-calibration method is developed for full-scale AUV maneuvering prediction, where a sensitivity-aware mechanism regulates bounded polynomial updates while the neural residual captures remaining nonlinear discrepancies under a shared prediction objective. To account for ocean-current effects in field data, a turning-motion-based current estimation and compensation procedure is incorporated to construct current-compensated learning targets for training and rollout. The framework is evaluated using sea-trial data collected from a 7-meter AUV under multiple maneuvering conditions. Results show that the proposed method improves recursive trajectory and velocity prediction compared with polynomial-only, neural-only, and frozen-prior hybrid baselines, demonstrating its applicability to field-data-based AUV maneuvering modeling.

19.
arXiv (CS.LG) 2026-06-16

OptEMA: Adaptive Exponential Moving Average for Stochastic Optimization with Zero-Noise Optimality

作者:

arXiv:2603.09923v4 Announce Type: replace Abstract: Exponential moving averages (EMAs) are a central component of widely used adaptive optimizers such as Adam. However, existing analyses of Adam-style methods often yield suboptimal guarantees in the zero-noise regime, rely on open-loop parameter schedules, or require prior knowledge of smoothness constants. Motivated by these limitations, we introduce OptEMA and analyze two complementary variants: OptEMA-M, which applies an adaptive, decreasing EMA coefficient to the first moment with a fixed second-moment decay, and OptEMA-V, which swaps these roles. At the heart of these variants is a Corrected AdaGrad-Norm coefficient schedule. This formulation renders OptEMA algorithmically closed-loop and Lipschitz-free, meaning its effective stepsizes are trajectory-dependent and require no parameterization via the Lipschitz constant. Under lower-boundedness, unbiasedness, bounded variance, average smoothness, and a bounded stochastic-gradient condition used to control the adaptive normalizers, we prove that both variants achieve the unified noise-adaptive rate $\tilde{\mathcal{O}} \left(T^{-1/2}+\sigma^{1/2}T^{-1/4}\right)$ for the averaged gradient norm. In the zero-noise regime, these bounds automatically reduce to the nearly optimal deterministic rate $\widetilde{\mathcal{O}}(T^{-1/2})$ without manual hyperparameter retuning.

20.
arXiv (CS.CV) 2026-06-16

Mask Proposal Voting Based on Geodesic Framework for Robust Image Segmentation

Despite great advances, finding accurate segmentation remains a challenging task, especially in scenarios with cluttered backgrounds, complex intensity variations and topology appearance. Minimal path models have exhibited their strong ability in addressing image segmentation tasks. However, the performance of minimal paths-based segmentation approaches is heavily influenced by model initialization, hence limiting their application scope in practice. In this work, we propose a novel mask proposal voting framework that overcomes the major drawback of classical approaches, allowing robust segmentation even in complicated scenarios. Firstly, we introduce an efficient method for constructing adaptive domain cuts as a constraint for initializing the region-based min-cut evolution, by which diverse and reliable mask proposal candidates can be generated, substantially increasing the possibility of accurately covering the objective region by these proposals. Secondly, we propose a new mask voting scheme to build a voting score map encoding the final segmentation information. In contrast to classical path voting methods, our model allows incorporating priors to assign different importance to each individual mask. As a consequence, the proposed segmentation model is capable of accurately delineating object boundaries under complex scenarios, and is insensitive to initialization. Experiments demonstrate that our method consistently outperforms state-of-the-art minimal path-based approaches in both accuracy and robustness.

21.
arXiv (CS.CV) 2026-06-18

URDF Synthesis from RGB-D Sequences via Differentiable Joint Inference and Energy-Consistent Verification

作者:

Reconstructing simulation-ready digital twins of articulated objects from sensor observations remains constrained by two persistent gaps: (i) part-level geometric reconstruction is decoupled from kinematic-parameter estimation, and (ii) the recovered models often violate basic dynamic invariants such as energy conservation, leading to drift when the URDF is replayed in physics simulators. We present KinemaForge, a constraint-driven pipeline that jointly infers part-level shape, joint topology, and joint parameters from short RGB-D sequences and validates the result against an energy-consistent verifier built on differentiable rigid-body dynamics. The pipeline introduces three components: a kinematic constraint graph that encodes joint-part incidences as soft edges; a differentiable screw-axis solver that backpropagates from rendered observations through Featherstone's articulated-body algorithm to joint parameters; and an energy residual loss that penalises non-physical free responses of the reconstructed model. Across five PartNet-Mobility categories and an internal RGB-D benchmark, KinemaForge reduces the average joint-axis error from 4.52 degrees to 2.83 degrees (-37.4%) over the strongest geometric baseline (PARIS) and from 5.30 degrees to 2.83 degrees (-46.6%) over the interaction-based Ditto baseline, lowers long-horizon simulation drift by 64% (vs. PARIS) over 50 s rollouts, and yields URDFs whose closed-loop manipulation success rate improves by 14.6 percentage points over Ditto in our preliminary evaluation. Code and reconstruction data will be released upon acceptance.

22.
arXiv (CS.CL) 2026-06-16

DYNA : Dynamic Episodic Memory Networks for Augmenting Large Language Models with Temporal Knowledge Graphs in Continuous Learning

Large Language Models (LLMs) struggle to incorporate new knowledge without forgetting or costly retraining. We propose DYNA, a lightweight framework that augments a frozen LLM with a temporal knowledge graph where events are nodes and temporal relations are directed, timestamped edges. The graph serves as an external, updatable memory. At query time, DYNA retrieves relevant nodes via random walks and centrality measures, then augments the LLM's response. Evaluated on three temporal recall tasks, DYNA reduces catastrophic forgetting by ~7% compared to fine-tuning and improves temporal ordering by ~5% over standard RAG. Higher graph clustering coefficients correlate with better retrieval, showing that graph structure matters. Contributions: (1) episodic memory as temporal KG, (2) retraining-free LLM augmentation, (3) graph properties as predictors of retrieval performance.

23.
arXiv (CS.LG) 2026-06-12

Prediction-Powered Causal Inference by Automatic Debiased Machine Learning and Semi-Supervised Riesz Regression

arXiv:2606.12892v1 Announce Type: cross Abstract: This study investigates semiparametric efficient estimation of causal and structural parameters in a semi-supervised setting. In our setting, unlabeled auxiliary regressors are available in addition to labeled observations consisting of outcomes and regressors. Our goal is to construct estimators of causal and structural parameters whose asymptotic variances are smaller than those of estimators constructed using only labeled data. We refer to this framework as prediction-powered causal inference (PPCI). We first derive the efficient influence function and the efficiency bound, which imply that the use of auxiliary regressors can attain a smaller asymptotic variance than the efficiency bound attainable from labeled observations alone. Then, by combining the efficient influence function with the debiased machine learning (DML) framework, we propose methods that we call DML-PPCI. If we construct an estimating-equation estimator, we refer to the method as EE-DML-PPCI; if we construct a targeted-learning estimator, we refer to the method as TMLE-DML-PPCI. The asymptotic variances of both estimators match our derived efficiency bound. In the construction of the estimators, estimation of the efficient influence function plays an important role. In our study, the efficient influence function is also a Neyman orthogonal score, which depends on the Riesz representer and the regression function. For Riesz representer estimation, we develop semi-supervised generalized Riesz regression with convergence rate guarantees.

24.
arXiv (quant-ph) 2026-06-16

Quantum enhancement and Doppler suppression of Kasevich-Chu atom interferometer with motional squeezing states

arXiv:2606.16632v1 Announce Type: new Abstract: Hybridization of internal and external atomic degrees of freedom in a Kasevich-Chu interferometer enables the possibility to enhance the sensitivity significantly even under quantum-standard limit. By introducing motional squeezing state as an input, we systematically derive the computational framework of quantum and classical Fisher information of two measurement protocols for arbitrary strength of Doppler effects. Through maximizing the corresponding classical Fisher information, we obtain the optimal control parameters and the corresponding quantum Fisher information. For population measurement, the largest sensitivity can be as large as four times than the semi-classical limit through enlarging the atom coherence length. For joint measurement of population and position, the competition between quantum enhancement and Doppler suppression induces two three behaviors, in one regime, the quantum enhancement dominates even in presence of strong Doppler broadening effects where the sensitivity is significantly enhanced; while in another regime, an optimal squeezing parameter is observed where the classical Fisher information reaches the maximum. Our results clearly demonstrate the robustness of external quantum enhancement against Doppler suppression. Our proposal can be readily applied to gravimeter of mobile platform where decoherence from noise will damage the many-body entanglement of internal spin squeezing.

25.
arXiv (CS.CL) 2026-06-11

Where Do Backdoors Live? A Component-Level Analysis of Backdoor Propagation in Speech Language Models

Speech language models (SLMs) are systems of systems: independent components that unite to achieve a common goal. Despite their heterogeneous nature, SLMs are often studied end-to-end; how information flows through the pipeline remains obscure. We investigate this question through the lens of backdoor attacks. We first establish that backdoors can propagate through the SLM, leaving all tasks highly vulnerable. From this, we design a component analysis to discover the role each component takes in backdoor learning. We find that backdoor persistence or erasure is highly dependent on the targeted component. Beyond propagation, we examine how backdoors are encoded in shared multitask embeddings, showing that poisoned samples are not directly separable from benign ones, challenging a common separability assumption used in filtering defenses. Our findings emphasize the need to treat multimodal pipelines as intricate systems with unique vulnerabilities, not solely extensions of unimodal ones.