Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
medRxiv (Medicine) 2026-06-24

Five-Year Breast Cancer Risk Prediction From Screening Breast Ultrasound Using Deep Learning

Objective: To develop and evaluate a deep learning model for five-year breast cancer risk prediction from screening breast ultrasound (BUS) examinations. Methods: This retrospective study included 295,298 breast ultrasound examinations from 122,072 women imaged between 2012 and 2020. Patients were split into training, validation, and test sets; the test set included screening examinations only. BUS-Risk-Net aggregated image features using attention-based multiple instance learning and combined them with age and ultrasound-estimated breast density to predict 2- to 5-year risk. Performance was compared with the full Tyrer-Cuzick model in a matched case-control cohort and with a reduced Tyrer-Cuzick model in the held-out test set. Risk stratification was evaluated within BI-RADS density categories. Results: In the matched case-control cohort (n = 240 women), BUS-Risk-Net achieved a 5-year AUC of 0.632 (95% CI, 0.562-0.702), versus 0.514 for the full Tyrer-Cuzick model (95% CI, 0.440-0.588; p = 0.04). Among 19,548 examinations from 9,015 women eligible for 5-year evaluation in the test set, BUS-Risk-Net achieved an AUC of 0.679 (95% CI, 0.653-0.706), versus 0.594 for the reduced Tyrer-Cuzick model (95% CI, 0.564-0.623; P < .001). Observed 5-year cancer incidence increased across AI-defined risk tiers within each BI-RADS density category, ranging from 0.0% to 5.8% after AI stratification, compared with 2.1% to 3.6% across density categories alone. Discussion: Deep learning models applied to screening breast ultrasound could enable long-term breast cancer risk prediction and stratify risk beyond breast density alone. External and prospective validation is needed before clinical use.

02.
arXiv (CS.CV) 2026-06-17

Revisiting LLM Adaptation for 3D CT Report Generation: A Study of Scaling and Diagnostic Priors

Recent advances in multimodal learning, including large language models (LLMs) and vision-language models (VLMs), have demonstrated strong adaptability to natural images. However, extending their use to the medical domain, particularly for volumetric (3D) images, is challenging due to high computational complexity, volumetric dependencies and the semantic gap between visual features and clinical terminology. Naively fine-tuning LLMs on limited medical data often leads to overfitting and clinical hallucination, where linguistic fluency is prioritized over clinical factuality. In this study, we investigate parameter-efficient adaptation strategies for volumetric CT report generation and introduce RAD3D-Prefix, a lightweight diagnostic-prior conditioning framework that minimizes the need for extensive parameter training. This module integrates image embeddings with multi-label diagnostic classification logits, preserving critical clinical details while bridging the semantic gap. By keeping the LLM frozen, our method requires minimal trainable parameters and mitigates the risk of overfitting on small, domain-specific datasets. Through a systematic study spanning LLMs from 96.1M to 1.6B parameters, we find that fine-tuning is most beneficial for smaller LLMs, whereas freezing larger (~1B+ LLMs and training only lightweight projection layers provides a superior trade-off between performance, generalization, and computational efficiency. Across multiple automatic metrics and a clinical reader study, RAD3D-Prefix outperforms comparable parameter-efficient baselines and demonstrates strong out-of-domain generalization while using substantially fewer trainable parameters than fully fine-tuned alternatives.

03.
arXiv (CS.LG) 2026-06-16

OptEMA: Adaptive Exponential Moving Average for Stochastic Optimization with Zero-Noise Optimality

Authors:

arXiv:2603.09923v4 Announce Type: replace Abstract: Exponential moving averages (EMAs) are a central component of widely used adaptive optimizers such as Adam. However, existing analyses of Adam-style methods often yield suboptimal guarantees in the zero-noise regime, rely on open-loop parameter schedules, or require prior knowledge of smoothness constants. Motivated by these limitations, we introduce OptEMA and analyze two complementary variants: OptEMA-M, which applies an adaptive, decreasing EMA coefficient to the first moment with a fixed second-moment decay, and OptEMA-V, which swaps these roles. At the heart of these variants is a Corrected AdaGrad-Norm coefficient schedule. This formulation renders OptEMA algorithmically closed-loop and Lipschitz-free, meaning its effective stepsizes are trajectory-dependent and require no parameterization via the Lipschitz constant. Under lower-boundedness, unbiasedness, bounded variance, average smoothness, and a bounded stochastic-gradient condition used to control the adaptive normalizers, we prove that both variants achieve the unified noise-adaptive rate $\tilde{\mathcal{O}} \left(T^{-1/2}+\sigma^{1/2}T^{-1/4}\right)$ for the averaged gradient norm. In the zero-noise regime, these bounds automatically reduce to the nearly optimal deterministic rate $\widetilde{\mathcal{O}}(T^{-1/2})$ without manual hyperparameter retuning.

04.
arXiv (CS.CV) 2026-06-17

FUSER: Feed-Forward MUltiview 3D Registration Transformer and SE(3)$^N$ Diffusion Refinement

Registration of multiview point clouds conventionally relies on extensive pairwise matching to build a pose graph for global synchronization, which is computationally expensive and inherently ill-posed without holistic geometric constraints. This paper proposes FUSER, the first feed-forward multiview registration transformer that jointly processes all scans in a unified, compact latent space to directly predict global poses without any pairwise estimation. To maintain tractability, FUSER encodes each scan into low-resolution superpoint features via a sparse 3D CNN that preserves absolute translation cues, and performs efficient intra- and inter-scan reasoning through a Geometric Alternating Attention module. Particularly, we transfer 2D attention priors from off-the-shelf foundation models to enhance 3D feature interaction and geometric consistency. Building upon FUSER, we further introduce FUSER-DF, an SE(3)$^N$ diffusion refinement framework to correct FUSER's estimates via denoising in the joint SE(3)$^N$ space. FUSER acts as a surrogate multiview registration model to construct the denoiser, and a prior-conditioned SE(3)$^N$ variational lower bound is derived for denoising supervision. Extensive experiments on 3DMatch, ScanNet and ArkitScenes demonstrate that our approach achieves the superior registration accuracy and outstanding computational efficiency.

05.
arXiv (CS.CV) 2026-06-18

Physics in 2-Steps: Locking Motion Priors Before Visual Refinement Erases Them

Image-to-Video diffusion models leverage input images to generate visually stunning content, yet frequently produce motion that violates physical laws. We reveal a surprising finding: a 2-step generation often exhibits better physical consistency than a 50-step output from the same model. Through spectral analysis, we trace this to phase erosion during denoising; the phase degrades significantly (dropping by $\approx 18\%$ from step 2 to step 50), whereas the magnitude remains relatively stable. Building on this insight, we propose PhaseLock, a training-free framework that preserves the valid motion priors from few-step inference throughout the denoising trajectory. Rather than relying on full-step inference for physical consistency, PhaseLock extracts a motion prior from just 2 steps and enforces it onto high-fidelity generation via Latent Delta Guidance. Our approach effectively mitigates phase degradation, improving physical consistency by an average of 6.2 points across diverse models while largely maintaining visual fidelity, with negligible overhead ($1.06\times$ time, $1.02\times$ memory) and reduced reliance on expensive external guidance methods ($\sim5\times$ time). Project Page: https://dnwjddl.github.io/phaselock

06.
medRxiv (Medicine) 2026-06-11

Corticospinal tract risk modifies motor recovery after minimally invasive surgery for intracerebral hemorrhage: a secondary analysis of MISTIE-III

Objective: Outcome after surgical hematoma evacuation for intracerebral hemorrhage (ICH) depends on hematoma location. As corticospinal tract (CST) integrity affects motor recovery after stroke, we hypothesized that CST integrity drives heterogeneity in surgical outcomes and investigated this in a secondary analysis of MISTIE-III participants. Methods: Risk of CST injury was categorized into four levels, based on the interaction between the CST, the hematoma, and perihematomal edema (PHE) on automatically segmented stability CT: no risk, PHE infiltration, hematoma infiltration, and complete interruption of the CST. Associations with outcome were tested using multivariable linear regression for motor National Institutes of Health Stroke Scale (NIHSS) at day 180 and ordinal regression for modified Rankin Scale (mRS) at day 365, introducing an interaction term between CST risk and treatment group. Results: Day 180 motor NIHSS was significantly lower for 'no risk' ({beta}:-3.77, [95% confidence interval [CI]: -5.8 to -1.70], p=0.0003) and 'PHE infiltration' ({beta}:-2.3, [95%CI: -3.5 to -1.1]; p=0.0002) vs. 'complete interruption'. Surgery was associated with lower Day 180 motor NIHSS in participants with hematoma infiltration ({beta}:-2.07, [95%CI: -3.8 to -0.4], p=0.016). Compared to complete interruption, 'no risk' (adjusted odds ratio [aOR]:0.27, [95%CI: 0.10 to 0.74], p=0.01) and 'PHE infiltration' (aOR:0.41, [95%CI: 0.23 to 0.74]; p=0.003) were associated with lower odds of unfavorable day 365 mRS. Surgery was associated with lower mRS in participants with no risk (aOR:0.23, [95%CI: 0.05 to 0.97, p=0.045). Interpretation: Increasing CST risk is associated with worse motor recovery (day 180) and disability (day 365). CST risk modifies the effect of the MISTIE-III procedure on motor recovery and disability.

07.
arXiv (CS.CV) 2026-06-24

REALM: A Unified Red-Teaming Benchmark for Physical-World VLMs

Vision-language models (VLMs) are increasingly used as perception-reasoning backbones for embodied intelligence in safety-critical physical systems, where perception or reasoning errors can lead to unsafe decisions or actions. Although many red-teaming methods have been developed to probe VLM vulnerabilities, their evaluation remains fragmented across datasets, metrics, and threat models, making direct comparison difficult and obscuring whether observed differences arise from stronger attacks, more vulnerable models, or incompatible evaluation settings. Existing chatbot-centric red-teaming benchmarks mainly standardize jailbreak and content-safety evaluation, but they do not systematically capture physically grounded functional failures or cover red-teaming methods that target physical-world VLMs. This raises the key challenge of comparing diverse attack methods under a unified protocol while targeting the same scenario-specific failures. We introduce REALM, to our knowledge the first unified red-teaming benchmark for physical-world VLMs. REALM integrates 12 red-teaming methods, 3 model-agnostic defenses, and 13 VLMs under a practical black-box threat model with shared datasets and metrics. To align adversarial objectives across attack families, REALM introduces an agentic target-generation pipeline that constructs shared, scenario-specific, and physically grounded attack objectives for each scene, enabling fair comparison of diverse red-teaming methods under aligned adversarial goals. Our evaluation shows that text and typographic injection attacks induce the most failures, multimodal co-optimization yields the strongest visual-perturbation transfer, single-pass attacks approach iterative methods at much lower cost, and model scale alone does not confer adversarial robustness. Code is available at https://github.com/UCF-ML-Research/REALM.

08.
arXiv (CS.CL) 2026-06-18

TurnGuide: Enhancing Meaningful Full Duplex Spoken Interactions via Dynamic Turn-Level Text-Speech Interleaving

Full-Duplex Speech Language Models (FD-SLMs) are specialized foundation models designed to enable natural, real-time spoken interactions by modeling complex conversational turn-taking such as interruptions, backchannels, and overlapping speech. End-to-end (e2e) FD-SLMs leverage real-world double-channel conversational data to capture nuanced two-speaker dialogue patterns for human-like interactions, but their conversational abilities often degrade compared to pure-text conversation due to prolonged speech sequences and limited high-quality spoken dialogue data. Although interleaved text-speech generation could mitigate this degradation, integrating discrete text tokens into continuous double-channel audio streams could disrupt the precise time alignment required for fluid interaction. To address this, we propose TurnGuide, a novel text-speech interleaved generation approach for e2e FD-SLMs that dynamically segments assistant speech into dialogue turns and interleaves turn-level text and speech generation. This approach allows FD-SLMs to integrate the semantic intelligence of LLMs without compromising the natural acoustic flow. Extensive experiments show that TurnGuide not only significantly improves e2e FD-SLMs to produce semantically meaningful, coherent speech but also achieves state-of-the-art performance on various turn-taking events. Demos are available at https://dreamtheater123.github.io/TurnGuide-Demo/. Code is available at https://github.com/dreamtheater123/TurnGuide.

09.
arXiv (CS.AI) 2026-06-16

Co-Scraper: query-aware DOM Pruning and Reusable Scraper Synthesis for Lightweight Web Data Extraction

arXiv:2606.14821v1 Announce Type: cross Abstract: The abundant and heterogeneous nature of web content necessitates automated information extraction, and generating scrapers that can be reused across similar web pages offers an effective solution for scalable data extraction. In this work, we propose Co-Scraper, a two-stage framework capable of handling the hierarchical complexity of long HTML documents. By integrating a query-aware DOM pruning mechanism with stable extraction strategy induction, Co-Scraper can effectively transforms web content into executable programmatic wrappers using a fine-tuned Qwen3-8B model. On the test set of SWDE, Co-Scraper achieves state-of-the-art performance with an F1 score of 94.78% and a reuse success rate of 90.39%. This framework significantly enhances the accuracy and resilience of data extraction, providing a highly efficient approach for web data acquisition tasks.

10.
arXiv (CS.AI) 2026-06-15

Tackling GNARLy Problems: Graph Neural Algorithmic Reasoning Reimagined through Reinforcement Learning

arXiv:2509.18930v3 Announce Type: replace-cross Abstract: Neural algorithmic reasoning (NAR) is a paradigm that trains neural networks to execute classic algorithms by supervised learning. Despite its successes, important limitations remain: inability to construct valid solutions without post-processing and to reason about multiple correct ones, poor performance on combinatorial NP-hard problems, and inapplicability to problems for which strong algorithms are not yet known. To address these limitations, we reframe the problem of learning algorithm trajectories as a Markov decision process, which imposes structure on the solution construction procedure and unlocks the powerful tools of imitation and reinforcement learning (RL). We propose the GNARL framework, encompassing the methodology to translate problem formulations from NAR to RL and a learning architecture suitable for a wide range of graph-based problems. We achieve very high graph accuracy results on several CLRS-30 problems, performance matching or exceeding much narrower NAR approaches for NP-hard problems and, remarkably, applicability even when lacking an expert algorithm.

11.
arXiv (CS.AI) 2026-06-19

eCNNTO: A Highly Generalizable ConvNet for Accelerating Topology Optimization

arXiv:2606.19921v1 Announce Type: new Abstract: This work proposes an element-based Convolutional Neural Network (CNN) to accelerate density-based Topology Optimization (TO), termed eCNNTO. TO generally undergoes a large number of iterations, where finite element analysis is performed in every iteration, leading to the efficiency bottleneck especially when dense meshes are used to achieve high-resolution designs. To address this limitation, eCNNTO is proposed to build upon Kallioras et al. (2020), where a Deep Belief Network (DBN) was trained for every element to predict its near-optimal density from its early history, thereby skipping the great majority of iterations and significantly accelerating the TO procedure. However, the method lacks spatial correlations among neighboring elements and may lead to disconnected features in the final structure. The proposed method employs CNN with residual connections to address this issue. On top of it, a novel training strategy is introduced to further enhance the optimization efficiency, where the training dataset consists of the final stage density histories rather than early ones. This change can also help reduce the required training data size. eCNNTO requires only a small dataset to train and yet it can be generalized to problems with largely different boundary conditions, loading cases, design domain geometries, mesh resolutions, as well as non-design domains. In the end, the generalization capabilities and efficiency of eCNNTO are demonstrated through a variety of examples in two and three dimensions, achieving up to 90% and 97% reduction of iterations, respectively.

12.
arXiv (CS.LG) 2026-06-16

Generative Molecular Design with Steerable and Granular Synthesizability Control

arXiv:2505.08774v2 Announce Type: replace-cross Abstract: Designing molecules that are both property-optimal and readily synthesizable is a central challenge in drug discovery. Existing works that do consider synthesizability can jointly output predicted synthesis routes for generated molecules. However, there has been minimal attention in addressing the ease of synthesis and with flexibility to incorporate desired reaction constraints. On the other hand, virtual screening searches for commercially available compounds, but imposes challenges when scaling to ultra-large (billion-size and beyond) chemical spaces. Here, we propose a generative design framework that unifies synthesis-constrained molecular design and ultra-large-scale virtual screening through steerable and granular synthesizability control. Generated molecules satisfy arbitrary multi-parameter optimization objectives with predicted synthesis routes satisfying mix-and-match constraints: including or avoiding certain reactions, incorporating specific building blocks, and minimizing synthesis route length. In an end-to-end in-house campaign targeting BRD4, we designed molecules synthesizable with specific selected reactions and building blocks, synthesized all six selected compounds, and identified two micromolar binders. We further demonstrate that reaction control enables efficient navigation of ultra-large make-on-demand chemical spaces to identify property-optimal candidates. By applying our framework to Chemspace's Freedom 4.0 make-on-demand space (142 billion molecules), we generated ~320k molecules (0.00023% of the library) on a single consumer-grade GPU (with only 8 GB GPU memory) and identified a micromolar Wee1 binder amongst 60 synthesized candidates. The single unified framework thus enables generating novel synthesizable molecules and retrieving catalogue-ready candidates, offering a flexible solution to mitigating the synthesizability bottleneck.

13.
medRxiv (Medicine) 2026-06-16

Validation of a Smartphone-Image-Based Computer-Vision Model for Lean Mass and Body Fat Estimation Against Dual-Energy X-ray Absorptiometry

Introduction Body composition, rather than body weight alone, is an increasingly important health metric, and preservation of lean mass has become a central concern in obesity treatment, aging, and chronic disease management. Dual-energy X-ray absorptiometry (DXA) provides accurate assessment of fat and lean tissue, but its cost and logistical requirements limit repeated measurement. Computer-vision approaches show promise for estimating adiposity from smartphone images, but lean-mass estimation remains less established. Methods We evaluated a computer-vision body composition model, applied to consumer-grade smartphone photographs, against DXA in a held-out validation sample of 195 adults from an ongoing cross-sectional study. Body fat percentage and total lean mass percentage were co-primary outcomes; for total lean mass percentage, an image-only configuration (no added covariates) was pre-specified as primary. Agreement was quantified using Lin's concordance correlation coefficient (CCC) as the lead statistic, with Pearson correlation, mean absolute error, root mean square error, mean bias, and Bland-Altman limits of agreement. In secondary analyses, appendicular lean mass and total lean mass percentage were each estimated with and without routine anthropometric and demographic inputs (body weight, height, age, and sex). Results Total lean mass percentage agreed with DXA from image features alone (CCC 0.916). Body fat percentage, estimated with routine inputs added, agreed at least as closely (CCC 0.930). Adding routine inputs barely changed agreement for total lean mass percentage but markedly improved it for appendicular lean mass, an absolute quantity that scales with body size. Conclusions A smartphone-image-based model estimated both body fat and lean mass with strong agreement to DXA, with lean mass percentage from image features alone. The approach needs no fixed equipment or ionizing radiation. Whether it can track change over time, including in incretin-based weight loss where lean mass preservation is a concern, was not assessed in this cross-sectional study.

14.
arXiv (CS.AI) 2026-06-16

AC-ODM: Actor–Critic Online Data Mixing for Sample-Efficient LLM Pretraining

arXiv:2505.23878v2 Announce Type: replace-cross Abstract: Optimizing pretraining data composition is pivotal for LLM generalization. While dynamic mixing outperforms static strategies by capturing evolving training dynamics, current methods fail to reconcile computational efficiency with sample efficiency and structural flexibility for diverse pipelines.We introduce Actor–Critic Online Data Mixing (AC-ODM), which approaches data mixing from a reinforcement learning perspective with a parameterized policy that we theoretically prove to act as a dynamic linear surrogate maximizing the constructive interference of gradients. To enhance practical flexibility, AC-ODM supports two operational modes: (i) a proxy mode for fixed, pre-prepared corpora, where a policy learned on a small model is transferred to a larger target; and (ii) a non-proxy mode for direct end-to-end training from scratch without priors. Empirically, AC-ODM significantly outperforms prior methods in convergence speed and downstream accuracy across various architectures. On Pythia-1B, it reaches optimal validation perplexity using up to 66% fewer training steps than competitive baselines, delivering a 27.5% relative improvement in MMLU accuracy and a 2.23 x higher pass@1 on HumanEval, all while incurring a virtually negligible (0.4%) per-step wall-clock increase and only 2% additional memory overhead. Code is available at https://github.com/DANG-ai/AC-ODM.

15.
arXiv (CS.CV) 2026-06-19

LaTtE-Flow: Layerwise Timestep-Expert Flow-based Transformer

Recent advances in multimodal foundation models unifying image understanding and generation have opened exciting avenues for tackling a wide range of vision-language tasks within a single framework. Despite progress, existing unified models typically require extensive pretraining and struggle to achieve the same level of performance compared to models dedicated to each task. Additionally, many of these models suffer from slow image generation speeds, limiting their practical deployment in real-time or resource-constrained settings. In this work, we propose Layerwise Timestep-Expert Flow-based Transformer (LaTtE-Flow), a novel and efficient architecture that unifies image understanding and generation within a single multimodal model. LaTtE-Flow builds upon powerful pretrained Vision-Language Models (VLMs) to inherit strong multimodal understanding capabilities, and extends them with a novel Layerwise Timestep Experts flow-based architecture for efficient image generation. LaTtE-Flow distributes the flow-matching process across specialized groups of Transformer layers, each responsible for a distinct subset of timesteps. This design significantly improves sampling efficiency by activating only a small subset of layers at each sampling timestep. To further enhance performance, we propose a Timestep-Conditioned Residual Attention mechanism for efficient information reuse across layers. Experiments demonstrate that LaTtE-Flow achieves strong performance on multimodal understanding tasks, while achieving competitive image generation quality with around 6x faster inference speed compared to recent unified multimodal models.

16.
arXiv (CS.AI) 2026-06-17

How Inference Compute Shapes Frontier LLM Evaluation

arXiv:2606.17930v1 Announce Type: new Abstract: AI evaluations are shifting toward harder tasks that benefit from longer trajectories involving tool use and iterative problem solving. As a result, performance is increasingly sensitive to the amount and allocation of compute available at test time ("inference compute"). Yet many evaluations still report performance at a single restrictive budget, meaning that low scores may reflect the evaluation setup rather than the model's underlying capability. To test this, we evaluate up to 12 frontier language models on seven challenging benchmarks spanning software engineering, mathematics, medicine, and cybersecurity. We use a controlled setup combining three simple inference-scaling interventions: larger token budgets, context compaction, and repeated submission attempts, guided either by the model itself or by minimal correctness feedback. We find three main results. First, larger token budgets substantially improve performance on benchmarks across multiple domains, including cybersecurity, FrontierMath, Humanity's Last Exam, and TerminalBench. Second, fixed-budget evaluations can increasingly understate frontier capability as models advance. Newer models reach higher performance at large budgets, where they unlock harder tasks and solve them more reliably. Third, benchmarks differ in which inference-scaling methods help most: repeated submission broadly improves performance, but the value of larger token budgets, external feedback, and parallel attempts varies by benchmark. Overall, our results show that benchmark scores are protocol-dependent. We therefore argue that evaluations should report capability as a function of inference-time compute, specify protocol choices explicitly, and compare model generations over a large shared compute range at matched budgets, especially in safety- or policy-relevant settings.

17.
medRxiv (Medicine) 2026-06-12

Disentangling Confounders from Pathology in Long-COVID Trajectory Prediction for Women: An Interpretable Large-Language-Model Approach

Objective. Post-acute sequelae of SARS-CoV-2 infection (PASC, "Long COVID") dispropor- tionately affects women, in whom hallmark symptoms–insomnia, fatigue, palpitations, cogni- tive difficulty–overlap with comorbidities and hormonal transitions such as menopause. This diagnostic overlap is a confounding problem: models that forecast future symptom severity risk attributing baseline physiological noise to viral pathology. We ask whether an interpretable, causally disentangled language model can separate true pathological signal from such con- founders while remaining competitive with strong predictors of future PASC severity

18.
arXiv (CS.CL) 2026-06-12

Two Wrongs, No Right: Auditing Social-Desirability Bias in LLM Annotators for Computational Social Science

Authors:

LLM annotators are increasingly used in computational social science (CSS), but it is unclear whether their alignment-shaped errors preserve the empirical conclusions a researcher would report. We audit three open-source 7B instruction-tuned models (Zephyr, Mistral-Instruct, Qwen2.5-Instruct) across six TweetEval tasks under four prompt conditions (72 cells) and find that social-desirability failures do not run in a single direction. Zephyr exhibits leniency bias, systematically under-applying harmful labels (offensive language: false benign rate 0.729, false alarm rate 0.031). Mistral and Qwen exhibit overcorrection, over-applying the same labels (Mistral hate-speech FAR = 0.604). All three models exhibit neutrality bias on abortion stance, underestimating opposition prevalence by 24 to 40 percentage points and inflating the neutral label. None of the four prompting interventions we test (neutral, safety framing, depersonalized, chain-of-thought) corrects these failures across models; safety framing can worsen stance distortion. Strikingly, Zephyr's hate-speech prevalence estimate matches the gold rate exactly while its class-conditional errors are large in both directions, an accidental cancellation that misleads aggregate validation. We translate these patterns into a three-part taxonomy with diagnostic FBR/FAR signatures and a lightweight gold-sample validation protocol. The headline for trustworthy CSS: a model that looks calibrated on aggregate metrics can still flip the substantive empirical conclusion a researcher would report.

19.
arXiv (CS.CV) 2026-06-16

FrameOracle: Learning What to See and How Much to See in Videos

Vision-language models (VLMs) advance video understanding but operate under tight computational budgets, making performance dependent on selecting a small, high-quality subset of frames. Existing frame sampling strategies, such as uniform or fixed-budget selection, fail to adapt to variations in content density or task complexity. To address this, we present FrameOracle, a lightweight, plug-and-play module that predicts both (1) which frames are most relevant to a given query and (2) how many frames are needed. FrameOracle is trained via a curriculum that progresses from weak proxy signals, such as cross-modal similarity, to stronger supervision with FrameOracle-41K, the first large-scale VideoQA dataset with validated keyframe annotations specifying minimal sufficient frames per question. Extensive experiments across five VLMs and six benchmarks show that FrameOracle reduces 16-frame inputs to an average of 10.4 frames without accuracy loss. When starting from 64-frame candidates, it reduces inputs to 13.9 frames on average while improving accuracy by 1.5%, achieving state-of-the-art efficiency-accuracy trade-offs for scalable video understanding.

20.
arXiv (CS.LG) 2026-06-12

Aerial Wildfire Suppression Planning with a Hybrid CNN-Cellular Automata Fire Model

arXiv:2606.13633v1 Announce Type: cross Abstract: Aerial wildfire suppression requires not only predicting fire spread, but also designing effective intervention strategies under operational and environmental uncertainty. We present a modeling and optimization framework for aerial wildfire suppression that combines a hybrid neural-cellular automaton wildfire model with gradient-based design of targeted aerial drops. The wildfire model predicts spatially varying spread behavior from terrain, fuel, and wind data, while the intervention module determines binary drop actions with continuous-valued location and orientation parameters mapped to the simulation grid. Water and retardant are represented with distinct suppression effects, corresponding to immediate reduction of active burning and persistent reduction of future spread. To evaluate the robustness of the resulting suppression plans, we quantify both aleatoric uncertainty through Monte Carlo sampling of daily fire-state realizations and epistemic uncertainty through spatially correlated prediction-error perturbations. A case study based on the 2020 Bear Fire shows that the framework can generate coherent aerial suppression schedules for reducing total fire-affected area and can support uncertainty-aware analysis of wildfire intervention strategies.

21.
arXiv (CS.AI) 2026-06-19

Toward Calibrated Mixture-of-Experts Under Distribution Shift

arXiv:2606.20544v1 Announce Type: new Abstract: Calibration aligns a model's predictive uncertainty with the frequencies of its empirical outcomes and is important for understanding and trusting reported probabilities. Recent work shows that enforcing calibration at the level of individual predictors can improve ensemble accuracy and calibration, with mixture-of-experts (MoE) models showing strong empirical improvements in particular; however, the conditions under which calibration helps MoE are not well understood. In this work, we study how MoE models behave under distribution shift, focusing on how routing mechanisms interact with expert-level calibration. We show that expert calibration is sufficient to ensure calibration of the overall model under a broad class of distribution shifts in hard-routed models, but is insufficient for calibrating soft-routed models. To address this, we propose an adversarial reweighting that penalizes calibration errors of the routed aggregate under distribution shift, and we demonstrate that it improves the accuracy-calibration tradeoff both on average and on difficult subsets of the data, across model classes, prediction tasks, and distribution shifts.

22.
arXiv (CS.AI) 2026-06-16

HAMON: Passive Optical Sequence Mixing for Long-Horizon Forecasting

arXiv:2606.17028v1 Announce Type: cross Abstract: Simple linear and frequency-domain models remain surprisingly competitive in long-horizon time-series forecasting, and recent mechanistic evidence suggests that standard forecasting benchmarks may not require the dense superposed representations that make transformers powerful in other domains. This raises a substrate-level question: if the core forecasting operator is often low-complexity and approximately linear, does it need to be implemented as learned digital temporal mixing? We introduce HAMON, a passive diffractive optical forecasting core in which historical values are encoded onto an optical aperture, future positions are left dark, and cascaded trainable phase masks with free-space diffraction shape the forecast directly in the output field. At inference, prediction is performed by a single passive optical propagation pass with no trainable digital sequence-mixing layer. Across standard benchmarks, HAMON outperforms the strongest digital baselines considered on ETTm2 at all horizons and on ETTh2 at all but the longest horizon, improving MSE by up to 14\% and doing so consistently across horizons rather than at isolated points. It is competitive on Weather and trails the strongest baselines on the remaining ETT settings and on the high-channel-count Traffic and Electricity datasets. Phase encoding, intensity-compatible readout, and phase-scrambling ablations, together with a TorchOptics cross-simulator check, indicate that the forecasts arise from the data-bearing optical field rather than from a digital forecasting head. Because the passive core uses standard Fourier optics, HAMON defines a concrete target for optical hardware and for passive physical sequence mixing.

23.
arXiv (CS.LG) 2026-06-12

Generalized Schrödinger Bridge on Graphs

arXiv:2602.04675v2 Announce Type: replace Abstract: Transportation on graphs is a fundamental challenge across many domains, where decisions must respect topological and operational constraints. Despite the need for actionable policies, existing graph-transport methods lack this expressivity. They rely on restrictive assumptions, fail to generalize across sparse topologies, and scale poorly with graph size and time horizon. To address these issues, we introduce Generalized Schrödinger Bridge on Graphs (GSBoG), a novel scalable data-driven framework for learning executable controlled continuous-time Markov chain (CTMC) policies on arbitrary graphs under state cost augmented dynamics. Notably, GSBoG learns trajectory-level policies, avoiding dense global solvers and thereby enhancing scalability. This is achieved via a likelihood optimization approach, satisfying the endpoint marginals, while simultaneously optimizing intermediate behavior under state-dependent running costs. Extensive experimentation on challenging real-world graph topologies shows that GSBoG reliably learns accurate, topology-respecting policies while optimizing application-specific intermediate state costs, highlighting its broad applicability and paving new avenues for cost-aware dynamical transport on general graphs.

24.
arXiv (CS.LG) 2026-06-15

EM-NeSy: Expectation Maximization for Neurosymbolic Learning

arXiv:2606.14463v1 Announce Type: new Abstract: Neurosymbolic (NeSy) models integrate neural networks and symbolic reasoning for robust and interpretable AI. State-of-the-art NeSy models require that the symbolic component is expressed in a differentiable way, often complicating the use of approximate inference. We propose EM-NeSy which casts probabilistic NeSy learning as an instance of the Expectation-Maximization (EM) algorithm. In the expectation step, we compute the posterior over the neurally predicted symbols conditioned on the label via probabilistic inference. In the maximization step, we update the neural parameters based on this posterior using gradient descent only through the neural component. This formulation unlocks the full potential of the EM algorithm for NeSy learning. It allows NeSy to extend naturally to approximate reasoning without any additional modifications or differentiability requirements of the symbolic component. Furthermore, it recovers the standard end-to-end gradient-based NeSy setting under exact inference. Our experimental results demonstrate the scalability and computational efficiency of EM-NeSy.

25.
arXiv (CS.CV) 2026-06-17

Edit3DGS: Unified Framework for Dynamic Head Editing via 2D Instruction-Guided Diffusion and 3D Gaussian Splatting

We present Edit3DGS, a unified framework for dynamic 3D head editing that integrates 2D instruction-guided diffusion with 3D Gaussian splatting. Unlike prior approaches that separately address frame-based edits or static 3D reconstruction, our method couples semantic controllability in the image domain with photorealistic, temporally consistent 3D representations. Given an input video, editable facial regions are masked and modified using a text-conditioned diffusion model to support fine-grained operations such as expression transformation, attribute modification, and appearance refinement. The edited frames are then aggregated through 3D Gaussian splatting to produce a coherent, high-fidelity avatar that preserves both identity and motion dynamics. To enforce consistency, Edit3DGS incorporates multi-view batch editing and lightweight inpainting strategies that recover lost expressions across timesteps. Experimental results demonstrate that our framework enables controllable, artifact-free head editing with smooth temporal transitions, offering practical applications in virtual avatars, immersive communication, film production, and interactive media.