Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.CV) 2026-06-16

RLPR: Radar-to-LiDAR Place Recognition via Two-Stage Asymmetric Cross-Modal Alignment for Autonomous Driving

All-weather autonomy is critical for autonomous driving, which necessitates reliable localization across diverse scenarios. While LiDAR place recognition is widely deployed for this task, its performance degrades in adverse weather. Conversely, radar-based methods, though weather-resilient, are hindered by the general unavailability of radar maps. To bridge this gap, radar-to-LiDAR place recognition, which localizes radar scans within existing LiDAR maps, has garnered increasing interest. However, extracting discriminative and generalizable features shared between modalities remains challenging, compounded by the scarcity of large-scale paired training data and the signal heterogeneity across radar types. In this work, we propose RLPR, a robust radar-to-LiDAR place recognition framework compatible with single-chip, scanning, and 4D radars. We first design a dual-stream network to extract structural features that abstract away from sensor-specific signal properties (e.g., Doppler or RCS). Subsequently, motivated by our task-specific asymmetry observation between radar and LiDAR, we introduce a two-stage asymmetric cross-modal alignment (TACMA) strategy, which leverages the pre-trained radar branch as a discriminative anchor to guide the alignment process. Experiments on four datasets demonstrate that RLPR achieves state-of-the-art recognition accuracy with strong zero-shot generalization capabilities.

02.
arXiv (quant-ph) 2026-06-19

On chip, multifunctional quantum sensing using single spins in a van der Waals crystal

arXiv:2606.19978v1 Announce Type: new Abstract: Nanoscale thermometry and magnetometry are in high demand across a wide range of scientific and technological applications. In this context, optically addressable spins in solids have emerged at the forefront of on-chip quantum sensing. However, simultaneous quantum sensing of multiple parameters (e.g., temperature and magnetic field) using the same spin sensor remains challenging due to cross-sensitivity to multiple physical quantities. Here, we demonstrate independent dual sensing of temperature and magnetic field using single quantum emitters in hexagonal boron nitride (hBN). We experimentally verify the independent response of the zero-phonon line (ZPL) position to temperature and of optically detected magnetic resonance (ODMR) to magnetic fields. Furthermore, we demonstrate local temperature sensing of a microcircuit while simultaneously measuring an external magnetic field. Our results establish quantum emitters in hBN as a robust platform for multifunctional quantum sensing under realistic operating conditions.

03.
arXiv (CS.CV) 2026-06-11

TopoHR: Hierarchical Centerline Representation for Cyclic Topology Reasoning in Driving Scenes with Point-to-Instance Relations

Topology reasoning is crucial for autonomous driving. Current methods primarily focus on instance-level learning for centerline detection, followed by a sequential module for topology reasoning that relies on simplified MLP layers. Moreover, they often neglect the importance of point-to-instance (P2I) relationships in topology reasoning. To address these limitations, we present TopoHR (Topological Hierarchical Representation), a novel end-to-end framework that establishes cyclic interaction between centerline detection and topology reasoning, allowing them to iteratively enhance each other. Specifically, we introduce a hierarchical centerline representation including point queries, instance queries, and semantic representations. These multi-level features are seamlessly integrated and fused within a hierarchical centerline decoder. Furthermore, we design a hierarchical topology reasoning module that captures both fine-grained P2I relationships and global instance-to-instance (I2I) connections within a unified architecture. With these novel components, TopoHR ensures accurate and robust topology reasoning. On the OpenLane-V2 benchmark, TopoHR refreshes state-of-the-art performance with significant improvements. Notably, compared with previous best results, TopoHR achieves +3.8 in $\mathrm{DET}_{l}$, +5.4 in $\mathrm{TOP}_{ll}$ on $subset_A$ and +11.0 in $\mathrm{DET}_{l}$, +7.9 in $\mathrm{TOP}_{ll}$ on $subset_B$, validating the effectiveness of the proposed components. The code will be shared publicly at https://github.com/Yifeng-Bai/TopoHR.git.

04.
arXiv (CS.CV) 2026-06-11

Frozen Foundation-Model Embeddings Discard Small-Lesion Signal in Chest Radiography: Implications for Pre-Deployment Evaluation

Frozen vision-transformer (ViT) foundation-model embeddings increasingly serve as the substrate for downstream chest-radiography (CXR) pipelines, yet where small-scale, low-contrast signal is retained or lost in the frozen forward pass has not been systematically quantified across architectures, pretraining domains, and objectives. We probed five frozen ViTs (RAD-DINO, DINOv2-B/14, DINOv3 ViT-7B, BiomedCLIP, MedSigLIP) and a frozen DINO-pretrained ResNet-50 architectural control across three large CXR cohorts (NIH-CXR14, MIMIC-CXR, Emory-CXR; aggregate pool n=492,724) and ChestX-Det10 (n=3,543; 1,462 small-lesion bounding boxes across Calcification, Nodule, Mass). Each model was evaluated with a small-scale-perturbation panel and a region-aware bounding-box-stratified probe on real lesions, comparing three pooling modes from the same forward pass: classification token (CLS), patch-mean (mean over all final-layer patch tokens), and bounding-box-restricted patch-local. On the perturbation panel, CLS embeddings sat at the chance floor (area under the ROC curve [AUC] 0.500-0.524); patch-mean was indistinguishable from CLS on iso-blur and reticular-fine cells but rose with CLS on larger directional-blur footprints, while disease AUC on globally decided tasks ranged 0.642-0.913. Patch-local probes recovered AUC ~1.0 from the same forward pass (per-model mean improvement +0.412 to +0.488); the ResNet-50 control reproduced the chance floor. On ChestX-Det10, image-level CLS classification showed within-class small-versus-large stratum gaps up to +0.243 AUC; bounding-box-level patch-local pooling on the same forward pass recovered AUC >= 0.899 on every (model x class) cell. Frozen ViT embeddings silently suppress small-scale signal at the global-aggregation step; the signal is recoverable from patch tokens conditional on a region of interest.

05.
Nature (Science) 2026-06-17

Optical fibre gripper for high-performance 3D micromanipulation

Authors:

Optical tweezers offer precise, non-contact control, but operate in a limited force regime and impose strict requirements on the characteristics of the targets as well as the environmental conditions1–4. Millimetre-scale mechanical tweezers can offer higher gripping force but are not suitable for precise manipulations5–11. Integrating microgrippers directly at the optical fibres provides a new approach for precise micromanipulation. However, existing fibre-integrated tweezers still face challenges in achieving high-performance manipulation of micro-objects (for example, single cells) within narrow spaces, mainly due to simplified architectures, constrained designs and millimetre-scale footprints12–14. Here we report a three-dimensional (3D) optical fibre gripper (OFG), which is fabricated by two-step, two-photon polymerization. The OFG consists of rigid photoresist microclaws and soft thermoresponsive hydrogel muscle doped with silver nanoparticles, and its size is only 38 × 38 × 61 μm3. The OFG exhibits a force-to-mass ratio of about 340 μN mg−1, outperforming previously reported fibre-integrated tweezers by one to two orders of magnitude. The OFG can manipulate opaque particles, irregular micromechanical components and diverse single-cell types. We further demonstrated its potential in 3D microassembly of complex microdevices (bearings, shafts and gearboxes) and biomimetic sampling in the narrow environment (<300 μm). These results position the OFG as a compact fibre-tip manipulator for 3D micromanipulation, offering reversible and tunable gripping in an intermediate force regime between optical field trapping and millimetre-scale mechanical tweezers. A miniature three-dimensional optical fibre gripper enables powerful, precise micromanipulation of particles and single cells in confined spaces, bridging the gap between optical and mechanical tweezers.

06.
arXiv (CS.AI) 2026-06-17

Probing, Fusion, and Trustworthiness: A Systematic Evaluation of Foundation Model Representations for Multimodal Cancer Analysis

arXiv:2606.17115v1 Announce Type: cross Abstract: Foundation models (FMs) have emerged as powerful representation extractors for medical data, yet their generalizability to datasets under distribution shift remains underexplored. This work systematically evaluates FM-based representations on a suite of computational pathology tasks across two real-world commercial cohorts, IH-BC and IH-NSCLC, drawn from the licensed in-house (IH) oncology dataset. The analysis focuses on two modalities, whole-slide images and transcriptomic profiles, drawn from the IH multimodal data. We first benchmark unimodal probing performance across five FMs on eight downstream classification tasks, and find that image and omics representations carry complementary predictive signals. Then we investigate whether multimodal fusion can yield additional gains over unimodal baselines by comparing three image-omics fusion strategies built on paired representations. The trustworthiness of selected unimodal and multimodal pipelines is further assessed through conformal prediction. Our results show that FM representations achieve competitive performance on out-of-distribution data and that multimodal fusion helps mainly when no single modality dominates the signal. Conformal prediction reveals that in the majority of cases where a point prediction fails, the true diagnosis remains recoverable within the prediction set, reinforcing the value of uncertainty-aware inference for clinical support.

07.
medRxiv (Medicine) 2026-06-19

Fine-Tuning SAM2 for Coronary Artery Segmentation in X-Ray Fluoroscopy

Authors:

SAM2 (Meta, 2024) provides a strong starting point for segmentation, but given the unique challenges in medical imaging (noise from patient movement, the projection-based nature of X-ray fluoroscopy, and low contrast between vessels and background), direct application is difficult. We fine-tune MedSAM2 on annotated coronary angiograms and apply it to video data for point-of-care use. On the ARCADE validation set (200 images), the fine-tuned model achieves Dice 0.767 compared to 0.033 zero-shot. On 10 fluoroscopic video studies from CoronaryDominance, it tracks vessels coherently and avoids falsely segmenting ribs, stents, and bypass grafts in 9 of 10 studies. Code is available at https://github.com/elakiyasivakumar/SAM2-Coronary-Angiography-VA and the fine-tuned checkpoint at https://huggingface.co/Elakiya17/CA-SAM2.

08.
arXiv (CS.AI) 2026-06-19

ZeSTA: Zero-Shot TTS Augmentation with Domain-Conditioned Training for Data-Efficient Personalized Speech Synthesis

arXiv:2603.04219v2 Announce Type: replace-cross Abstract: We investigate the use of zero-shot text-to-speech (ZS-TTS) as a data augmentation source for low-resource personalized speech synthesis. While synthetic augmentation can provide linguistically rich and phonetically diverse speech, naively mixing large amounts of synthetic speech with limited real recordings often leads to speaker similarity degradation during fine-tuning. To address this issue, we propose ZeSTA, a simple domain-conditioned training framework that distinguishes real and synthetic speech via a lightweight domain embedding, combined with real-data oversampling to stabilize adaptation under extremely limited target data, without modifying the base architecture. Experiments on LibriTTS and an in-house dataset with two ZS-TTS sources demonstrate that our approach improves speaker similarity over naive synthetic augmentation while preserving intelligibility and perceptual quality. Audio samples are available on our web page.

09.
medRxiv (Medicine) 2026-06-15

Genome-wide colocalization of body fat distribution GWAS and subcutaneous adipose eQTLs identifies SNX10, DGKQ, and CBX3 as candidate causal genes for cardiometabolic disease

Authors:

Background: Genome-wide association studies (GWAS) have identified hundreds of loci associated with body fat distribution, yet the causal genes and regulatory mechanisms through which these variants exert their effects remain largely unknown. Expression quantitative trait locus (eQTL) colocalization provides a powerful framework for identifying genes whose expression is genetically coregulated with complex traits. Methods: We performed a genome-wide colocalization analysis integrating waist-hip ratio adjusted for body mass index (WHRadjBMI) GWAS summary statistics from 694,649 individuals (Pulit et al., 2019) with subcutaneous adipose tissue eQTLs from the Genotype-Tissue Expression (GTEx) Project v8 (N = 581 donors). GWAS coordinates were lifted from GRCh37 to GRCh38 to enable direct alignment with GTEx data. We incorporated CAVIAR fine-mapping results to overcome the limitation of FDR-significant eQTL filtering. Colocalization was assessed using the approximate Bayes factor framework (coloc.abf) across 335 independent genome-wide significant loci. Results: Of 2,897 locus-gene pairs tested, 489 (16.9%) showed strong colocalization (PP.H4 > 0.8) and 618 (21.3%) showed moderate evidence (PP.H4 > 0.5). The strongest colocalization was observed for SNX10 (sorting nexin 10; PP.H4 = 1.000), a recently characterized regulator of adipocyte differentiation and female-specific diet-induced obesity. Other top hits included DGKQ (diacylglycerol kinase theta; PP.H4 = 0.9999999), an emerging pharmacological target for insulin resistance, and CBX3 (chromobox 3; PP.H4 = 0.9999974), an epigenetic regulator linked to cardiovascular disease. Established adiposity genes including GRB14 (PP.H4 = 0.681) and KLF14 (PP.H4 = 0.590) were recovered, validating our approach. Several loci exhibited extensive allelic heterogeneity, with 50 genes colocalizing at a single chromosome 3 locus. Conclusions: Our analysis provides a comprehensive map of adipose tissue gene regulatory mechanisms underlying genetic risk for body fat distribution. The identification of SNX10, DGKQ, and CBX3 as high-confidence candidate causal genes advances the translation of GWAS associations into mechanistic understanding and therapeutic targets for obesity-related cardiometabolic disease.

10.
arXiv (math.PR) 2026-06-15

Trivariate Hypergeometric Series Formulas for Pure Partition Functions of Multiple $3$-SLE$_\kappa$

Authors:

arXiv:2606.14038v1 Announce Type: new Abstract: Pure partition functions of multiple SLE are characterized by null-state partial differential equations, Möbius covariance, and boundary asymptotics. After quotienting by Möbius covariance, the case of three curves is the first genuinely multivariable one: the moduli space has three independent variables, naturally represented by the three unoriented cross-ratios of the three pairs of links. We solve this Möbius-normalized three-variable problem for the two basic link-pattern types of multiple \(3\)-SLE\(_\kappa\), namely the rainbow and neighbor patterns. Writing \(\beta=4/\kappa\), we construct explicit trivariate hypergeometric-series normal forms and identify them with the corresponding pure partition functions for all \(\beta>1/2\) in the rainbow case and all \(\beta\ge2/3\) in the neighbor case. Equivalently, these ranges are \(\kappa\in(0,8)\) and \(\kappa\in(0,6]\), respectively. The proof is analytic. The null-state PDEs and Möbius covariance yield recursion relations for the trivariate coefficient arrays. In the rainbow case, coefficient estimates give convergence and boundary regularity on the closed cube. In the neighbor case, Pfaff systems continue the local power series to a neighborhood of \([0,1)^3\), while side-face equations, regular normal estimates, and corner propagation give continuity on \([0,1]^3\) for \(\beta\ge2/3\). The endpoint \(\beta=2/3\), corresponding to \(\kappa=6\), requires a logarithmic normal term. The two-dimensional boundary degenerations are classical Appell \(F_1\) and Horn \(G_2\) functions. The probabilistic identification uses SLE martingale arguments and Itô calculus, together with positivity and boundary regularity. We also discuss boundary degenerations, including heuristic connections with boundary Green's functions.

11.
arXiv (CS.CL) 2026-06-16

ACCORD: Action-Conditioned Contextual Grounding for Language Agents

User instructions are often underspecified because humans rely on implicit assumptions about the surrounding environment. For large language model (LLM) agents operating in information-rich digital and physical environments, these assumptions cannot be inferred from the instruction alone; they must be recovered from the current state of tools, data, interfaces, and observations. Effective execution therefore requires agents to identify missing context, ground it in observed evidence, and carry it forward into subsequent actions. We show that current agents often fail to do so. They act from assumed rather than observed specifics, overlook information they could have gathered, and fail to incorporate evidence that has already been returned. Building on this insight, we propose ACCORD (Action-Conditioned Contextual Grounding), a simple and effective agent framework for adaptive grounding. Before each action, ACCORD actively probes the environment for missing information and integrates relevant context from the agent's trajectory that would otherwise be overlooked. Requiring no additional training or task-success signals, ACCORD improves task-goal completion on AppWorld by up to +20.6 points with GPT-5-mini, from 42.0% to 62.6%, compared to strong baselines. These gains persist with a substantially stronger base model (+10.8 with Claude-4.5-sonnet), an open-weight model (+10.1 with Qwen3.5-27B-FP8), and on the embodied AlfWorld benchmark (+7.4 success rate with GPT-5-mini).

12.
arXiv (CS.CV) 2026-06-16

MVM-IOD: An Industrial Object-Centric Benchmark Dataset for the Evaluation of 3D Reconstruction Methods

3D object reconstruction, and camera pose estimation in industrial applications are challenging tasks, as errors are costly while the computation time is often limited. The complexity of typical industrial objects further complicates these tasks. Most of the existing datasets in this context do not depict realistic industrial scenarios. Therefore, we introduce the Machine Vision Metrology Industrial Object Dataset (MVM-IOD). Images of typical industrial objects are captured systematically, by moving a camera, mounted at the end effector of an industrial robot arm, on a hemisphere around the objects. MVM-IOD contains reference camera poses and reference 3D point clouds, the acquired RGB images of 9 objects and 2 background choices resulting in 18 scenes, which allows evaluation of all image based methods that compute a 3D reconstruction, camera poses, or novel views of a scene. Based on MVM-IOD, we extensively evaluate current SOTA 3D reconstruction and camera pose estimation methods, such as Structure from Motion, Multi-View Stereo, recent feed forward methods (Visual Geometry Grounded Transformer, {\pi}3), and 2D Gaussian Splatting and report our findings as a baseline for future research. The experiments show that capture setups like ours generate out-of distribution images for feed forward methods, leading to suboptimal point clouds and camera poses. However, these out-of-distribution images can be shifted closer to the training distribution by applying simple preprocessing steps. Consequently, in certain industrial applications, feed forward methods should be used with caution.

13.
arXiv (CS.AI) 2026-06-16

QPILOTS: Efficient Test-Time Q-Steering for Flow Policies

arXiv:2606.14801v1 Announce Type: cross Abstract: Flow-matching and diffusion policies are expressive action generators, but optimizing them with temporal-difference reinforcement learning (RL) remains difficult. Effective policy extraction requires exploiting the critic's action gradient, yet directly backpropagating this signal through a multi-step denoising process can be numerically unstable. Existing methods work around this either by discarding gradient information, distilling the policy into a simpler one-step actor, or repeatedly fine-tuning the denoising policy as the critic improves. We propose QPILOTS, a method that leaves the original policy unmodified and steers the denoising process at inference time. At each denoising step, instead of evaluating the critic on the noisy intermediate action where critic predictions are unreliable, we first project that intermediate state to an estimate of the final clean action and compute the critic gradient there. We introduce two variants: QPILOTS-U uses a fast single-point approximation, while QPILOTS-M draws differentiable posterior samples via a learned auxiliary network. On a standard offline-to-online RL benchmark, QPILOTS achieves the best aggregate performance, reaching an average success rate of 90% across 50 tasks. We also apply QPILOTS to steer a large, frozen, pretrained Vision-Language Action (VLA) foundation model, outperforming or matching prior inference-time approaches across six manipulation tasks in simulation.

14.
arXiv (CS.LG) 2026-06-19

Execution-State Capsules: Graph-Bound Execution-State Checkpoint and Restore for Low-Latency, Small-Batch, On-Device Physical-AI Serving

Authors:

arXiv:2606.20537v1 Announce Type: new Abstract: Mainstream LLM serving systems reuse prefix work mainly through paged or radix key-value (KV) caches. This is highly effective for high-throughput, high-concurrency serving, but it manages only one positional fragment of execution state: the KV cache. We study the opposite regime: low-latency, small-batch, on-device physical-AI serving, where interactive LLM agents, speech systems, and robot policies repeatedly branch, reset, interrupt, and re-enter under tight responsiveness budgets. We introduce execution-state capsules, a graph-bound checkpoint and restore mechanism for the complete restorable state at a committed boundary. FlashRT is a white-box, backend-facing kernel runtime whose evaluated NVIDIA CUDA backend runs captured graph plans over contiguous static buffers with no block-table indirection. Because the live state is a closed set of named buffers, a capsule can snapshot, restore, fork, or roll back the whole execution boundary, including KV, recurrent state, convolution state, MTP state, and metadata. This moves reuse from token-addressed KV fragments to graph-bound execution-state boundaries. On an RTX 5090, capsule restore is byte-exact at the stored-state level and token-identical under greedy decode. A KV-only ablation diverges, showing that recurrent state is load-bearing. GPU-resident snapshot and restore are sub-millisecond, and TTFT speedup over cold prefill grows from 3.9x at 2k tokens to 27x at 16k tokens. On Jetson AGX Thor and DGX Spark, the same correctness and structural properties hold. Capsules are not a replacement for high-throughput KV-cache serving; they define a complementary latency-first serving point for explicit execution-state reuse.

15.
arXiv (CS.CV) 2026-06-11

Right Regions, Wrong Labels: Semantic Label Flips in Segmentation under Correlation Shift

The robustness of machine learning models can be compromised by spurious correlations between non-causal features in the input data and target labels. A common way to test for such correlations is to train on data where the label is strongly tied to some non-causal cue, then evaluate on examples where that tie no longer holds. This idea is well established for classification tasks, but for semantic segmentation the specific failure modes are not well understood. We show that a model may achieve reasonable overlap while assigning the wrong semantic label, swapping one plausible foreground class for another, even when object boundaries are largely correct. We focus on this semantic label-flip behaviour and quantify it with a simple diagnostic (Flip) that counts how often ground truth foreground pixels are assigned the wrong foreground identity while remaining predicted as foreground. In a setting where category and scene are correlated during training, increasing the correlation consistently widens the gap between common and rare test conditions and increases these within-object label swaps on counterfactual groups. Overall, our results motivate assessing segmentation robustness under distribution shift beyond overlap by decomposing foreground errors into correct pixels, flipped-identity pixels, and missed-to-background pixels. We also propose an entropy-based, ground truth label-free `flip-risk' score, which is computed from foreground identity uncertainty, and show that it can flag flip-prone cases at inference time. Code is available at https://github.com/acharaakshit/label-flips.

16.
arXiv (quant-ph) 2026-06-19

Propagating Collective Spin-valley Modes in Twisted WSe2

arXiv:2507.18770v2 Announce Type: replace-cross Abstract: The emergence of neutral collective modes is a hallmark of correlated quantum phases but is often challenging to probe experimentally. In two-dimensional flatband systems, charge responses have been intensively investigated yet neutral excitations remain largely unexplored. In particular, intervalley coherent state (IVC) features a neutral Goldstone mode due to spontaneously broken valley U(1) symmetry. While IVC state has been proposed as a unifying theme across graphene and semiconductor based systems, its defining feature, the neutral Goldstone mode, remains elusive in experiment. Here we investigate space and time resolved transport of neutral modes in twisted WSe2 moire superlattices through a novel ultrafast imaging technique. We uncover two new propagating collective modes with very different velocities, which emerge near the van Hove singularity (VHS) in both intermediate (3.5 to 4 degree) and large (around 5 degree) angle twisted WSe2. The fast-propagating mode has a large speed of about 3 km/s and is consistent with a Goldstone mode for an IVC state, while the slow-moving mode is likely a gapped amplitude mode. They can be understood as the spin-valley analogues of collective modes of a superfluid, whose propagation is imaged for the first time in a condensed matter system. Our study demonstrates a powerful new approach for probing charge-neutral modes in quantum materials and offers key insights into the interplay between charge and spin-valley physics in moire superlattices.

17.
arXiv (CS.AI) 2026-06-11

SPEAR: A System for Post-Quantization Error-Adaptive Recovery Enabling Efficient Low-Bit LLM Serving

arXiv:2606.11244v1 Announce Type: cross Abstract: Efficient large language model (LLM) serving is increasingly constrained by deployment cost. Quantization is a key technique for reducing serving cost, yet even state-of-the-art 4-bit quantizers exhibit a noticeable quality gap from FP16, particularly for smaller models where low-bit serving is most beneficial. We identify a fundamental cause of this gap: quantization error is highly input-dependent and varies substantially across tokens, while existing post-quantization compensation methods are static and apply identical corrections to all inputs. As a result, easy tokens are over-corrected while hard tokens remain under-corrected. We present SPEAR, a system for post-quantization error-adaptive recovery that improves low-bit LLM serving. SPEAR introduces lightweight Error Compensators (ECs) modulated by per-token gates and places them only at the most error-sensitive layers identified through a CKA-guided entropy-aware diagnostic. This focuses a small parameter budget where it is most effective. Efficient deployment of ECs presents several systems challenges, including additional computation, tensor-parallel synchronization caused by input-dependent gating, and latency instability across configurations. SPEAR addresses these issues through adaptive kernel-fusion dispatch, combining an epilogue-integrated peer-reduction kernel with P2P dual-write to fuse the post-EC computation into low-bit GEMMs, and an SLO-constrained EC-aware scheduler for predictable serving performance. Across challenging per-channel quantization settings, SPEAR recovers 56-75% of the perplexity gap between W4 and FP16 while adding less than 1% model memory overhead and maintaining latency comparable to a widely used 4-bit serving deployment.

18.
arXiv (CS.CL) 2026-06-15

Chronological Thinking in Full-Duplex Spoken Dialogue Language Models

Recent advances in spoken dialogue language models (SDLMs) reflect growing interest in shifting from turn-based to full-duplex systems, where the models continuously perceive user speech streams while generating responses. This simultaneous listening and speaking design enables real-time interaction and the agent can handle dynamic conversational behaviors like user barge-in. However, during the listening phase, existing systems keep the agent idle by repeatedly predicting the silence token, which departs from human behavior: we usually engage in lightweight thinking during conversation rather than remaining absent-minded. Inspired by this, we propose Chronological Thinking, an on-the-fly conversational thinking mechanism that aims to improve response quality in full-duplex SDLMs. Specifically, chronological thinking presents a paradigm shift from conventional LLM thinking approaches, such as Chain-of-Thought, purpose-built for streaming acoustic input. (1) Strictly causal: the agent reasons incrementally while listening, updating internal hypotheses only from past audio with no lookahead. (2) No additional latency: reasoning is amortized during the listening window; once the user stops speaking, the agent halts thinking and begins speaking without further delay. Experiments demonstrate the effectiveness of chronological thinking through both objective metrics and human evaluations show consistent improvements in response quality. Furthermore, chronological thinking robustly handles conversational dynamics and attains competitive performance on full-duplex interaction metrics.

19.
arXiv (CS.LG) 2026-06-19

AgentArmor: A Framework, Evaluation, \& Mitigation of Coding Agent Failures

arXiv:2606.19380v1 Announce Type: cross Abstract: Software engineering and deployment are increasingly being delegated to AI coding agents. The scale of their adoption is surfacing rare, but highly destructive, failure modes. In this paper, we study these failure modes as stemming from three distinct mechanisms: underspecification, where default model behavior is unsafe; capability errors, where the safe action is available but the model does not adhere to it due to bias or capability limitations; and agent harness errors, where the model fails to execute the safe action through the harness. We evaluate these across 8 different evaluations, each inspired by real-life deployment failures, totaling 20 coding environments and 59 synthetic transcript templates. Based on this evaluation, we propose AgentArmor, an agent harness modification, to mitigate these errors. By adding an extended system prompt, a separate command classifier, a ``3 strikes'' policy, deterministic guardrails, and tools for the agent to edit its own context, we show that AgentArmor is safer across a statistically significant number of samples. Thus, we suggest concrete mitigations for current coding agents and a design philosophy for future agent harness features.

20.
arXiv (CS.CV) 2026-06-11

From Nominal Intensity to Equivalent Rainfall: A Path-Based Credibility Evaluation Framework for Simulated Rainfall in Autonomous-Driving Perception Tests

Credible simulated-rainfall conditions are essential for identifying perception-system boundaries and supporting SOTIF-oriented risk assessment in automated driving. However, closed-field tests are often described only by nominal rainfall intensity or single-point measurements, making it difficult to align simulated rain fields with real rainfall and map test results to real-world scenarios. This paper proposes a path-based credibility evaluation method for simulated rainfall in autonomous-driving perception tests. Using the drop size and velocity joint distribution of real rainfall as the reference, each candidate path is represented by path-equivalent rainfall intensity, an uncertainty band, and a path-averaged Realism of Raindrop Distribution (RRD) score. Lidar target point-cloud count and mean reflectivity are further used for perception-consistency correction, quantifying the proxy capability of each simulated-rainfall path for real-rainfall perception effects. Experiments are conducted using about 10,000 real-rainfall raindrop-spectrum samples, 728 RainSense perception samples, and 45 spatial sampling points in a 2.4 m x 7.2 m simulated-rainfall area. Results show that spatial non-uniformity remains under the same nominal condition, confirming the need for path-based evaluation. The method identifies Path IV and Path VI as preferable candidates, with results of 11.54 +/- 0.31 mm/h, RRD = 0.43, and 8.28 +/- 0.34 mm/h, RRD = 0.46, respectively. These paths show more balanced performance in rainfall-intensity stability, raindrop-spectrum realism, and perception consistency. The proposed method supports path selection, condition description, and credible interpretation of autonomous-driving perception tests under rainfall.

21.
arXiv (CS.LG) 2026-06-19

Matching Markets meet Cumulative Prospect Theory: Towards Optimal and Adversarially Robust Learning

arXiv:2606.19883v1 Announce Type: new Abstract: We study a multi-agent multi-armed bandit problem in the competitive setup with two-sided matching markets under a human centric decision making model. To capture human preferences, we use cumulative prospect theory (CPT) that weighs the actions of the agent in a nonlinear fashion using a ($\alpha$-Hölder continuous) weight function. CPT has been widely used in behavioral economics and risk sensitive machine learning to emulate human preferences. We analyze the state-of-the-art learning algorithm with CPT weight distorted rewards and obtain a player optimal regret of $\mathcal{O}(K\log T \left(\frac{1}{\Delta}\right)^{2/\alpha})$, where $K$ denotes the number of arms, $T$ is the learning horizon, and $\Delta$ represents (suitably defined) players' minimum preference gap. Noticing the dependence on $\Delta$ to be sub-optimal, we further improve this regret by judiciously selecting the active set of arms during exploration, which removes the dependence on $K$ in the dominant term and achieves an improved (optimal) regret guarantees in the setting where the number of arms $K$ is significantly larger than the number of players $N$. In addition, we consider adversarial markets where the observed rewards of the agents may be corrupted. We propose and analyze algorithms for robust markets with CPT as risk sensitive measure in both settings where the total corruption budget is known and where it is unknown, and establish logarithmic player-optimal regret guarantees in both cases.

22.
arXiv (CS.AI) 2026-06-18

Controllable Quantum Memory Capacity in Quantum Reservoir Networks with Tunable partial-SWAPs

arXiv:2605.12713v3 Announce Type: replace-cross Abstract: In the field of quantum reservoir computing (QRC), many different computational models and architectures have been proposed. From these models, we identify feedback-based models – which use a feedback mechanism to re-embed classical measurements from the QRC – and recurrent models – which use a multi-register approach with memory and readout qubits – as the two major competing architectures that have been discussed and validated on hardware. In this paper, we advance upon the recurrent architectures, which employ a two register approach to endow the QRC with a fading memory. While these approaches have been validated on hardware and have demonstrated great real-world performance on noisy-intermediate-scale-quantum (NISQ) quantum processing units (QPUs), the exact mechanism through which the memory capacity arises is not completely understood or fully controllable. With this, we augment the recurrent approaches and present a hardware-realizable mechanism, which we call a tunable partial-SWAP, that allows for the direct control of the rate of memory dissipation from a QRN implemented on a gate-based QPU. The theory behind this mechanism is discussed in terms of a controlled amplitude-damping channel and validation experiments using a randomized short-term memory capacity (STMC) recall benchmark and the NARMA-5 dataset are conducted using simulation and IBM QPUs, respectively.

23.
arXiv (CS.LG) 2026-06-11

SPADE: Split-and-Delay Embeddings for Autoregressive High-Granularity Calorimeter Simulation

arXiv:2606.11304v1 Announce Type: cross Abstract: We introduce SPADE (SPlit And Delay Embeddings), an autoregressive transformer for sequences whose tokens carry multiple features. Rather than embedding these features jointly, SPADE embeds them independently. Delaying each feature stream relative to the previous one allows intra-token correlations to be learned by the standard self-attention mechanism. Applied to point-cloud calorimeter shower generation in the highly granular ILD detector, SPADE is competitive with the state of the art AllShowers model on photon showers, and substantially outperforms its VQ-VAE-based predecessor OmniJet-$\alpha_C$. The mechanism is applicable to any generative task with multi-feature tokens, enabling LLM-style pretraining workflows for higher-dimensional data.

24.
medRxiv (Medicine) 2026-06-16

Optimal Clinical Trials Platform for Progressive Multiple Sclerosis (OCTOPUS): protocol for an international, multi-arm, multi-stage, platform, randomized controlled, double-blind, phase 3 clinical trial.

Introduction Current treatments for multiple sclerosis (MS) do not address the pathological processes of neurodegeneration and chronic demyelination. This, coupled with the significant challenges of translating promising phase 2 results to phase 3 trial success, highlights the need for more efficient trial designs, such as platform multi-arm multi-stage (MAMS) trial approaches. MAMS trials have demonstrated success in areas such as oncology and infectious diseases. They are typified by a statistically robust core trial design that allows the addition of further treatment arms and utilisation of interim outcome analyses at pre-defined timepoints, to determine whether to terminate a treatment arm early or proceed to the final outcome analysis. To address the challenges in progressive multiple sclerosis (PMS) treatment discovery, the Optimal Clinical Trials Platform for PMS (OCTOPUS) trial was developed. It currently utilises MRI whole-brain atrophy as its interim outcome measure and the clinically relevant composite Expanded Disability Status Scale Plus (EDSS-Plus) as its final outcome measure. A rigorous and systematic drug selection process that assessed preclinical in vitro and animal model evidence, along with additional human data, led to the prioritisation of R/S-alpha lipoic acid (R/S-ALA) and metformin for testing against placebo, targeting pathobiological mechanisms relevant to PMS. All participants will be eligible to receive the current standard of care, including disease-modifying treatments (DMTs). Method and analysis OCTOPUS will be a multi-centre, randomised, placebo-controlled, double-blind, phase 3, MAMS trial of participants aged 25 to 70 years (inclusive) with PMS and an EDSS score of 4.0 to 8.0 (inclusive). Steady progression must be the major cause of increasing disability rather than relapse in the preceding 2 years. In the trial s first candidate drug cycle, participants will be allocated to R/S-ALA, metformin, or placebo in a 1:1:1 ratio. Cycle 1 active treatments will start as R/S-ALA 600 mg once daily, increased after 4 weeks to 600 mg twice daily, or metformin 1 g once daily, increased after 4 weeks to 1 g twice daily. The trial will be multinational, with participation from 28 hospitals across the UK and 10 hospitals in Australia. Clinician-reported measures will include: the EDSS-Plus and the individual components: EDSS, Timed 25 Foot Walk (T25FW); 9 Hole Peg Test (9HPT); Symbol Digit Modalities Test (SDMT); Sloan Low Contrast Visual Acuity (SLCVA); and Relapse assessment. Patient-reported outcomes include MS specific walking, fatigue, pain, and impact scales. We will include a health economic analysis. Analysis stage 1 will require randomisation of 125 participants per arm and utilise MRI percentage brain volume change (PBVC) with the Structural Image Evaluation using Normalisation of Atrophy (SIENA) technique from baseline to 78 weeks. A positive outcome in analysis stage 1 will detect a 0.15% per year whole brain atrophy difference with a one-sided alpha of 0.35 and power of 95%, ensuring a low probability of erroneously rejecting a treatment arm at this stage. Any arms that show a positive effect will proceed to final analysis stage 2. Analysis stage 2 will require 600 participants per arm. Participants included in stage 1 will also be included in the stage 2. Analysis stage 2 will evaluate time to 6-month confirmed disability progression in the EDSS-Plus, in order to detect a 25% hazard ratio reduction with 90% power and an alpha of 0.05. Assuming one treatment arm proceeds to analysis stage 2, the trial will recruit approximately 1,200 participants and last about 6 years. This is approximately two-thirds the size and half the duration of separately conducted two-arm phase 2 and 3 trials. Ethics and dissemination The protocol was approved by the London Hampstead REC (22/LO/0622). This manuscript is based on protocol version 8.0, 28th August 2025. The findings of this trial will be disseminated through peer-reviewed publications and conference presentations. There will be a close communication strategy developed with the UK MS Society (MSS) and full patient and public involvement and engagement (PPIE). Trial registration ISRCTN: 14048364 EudraCT number: 2021-003034-37 CTA 20363/0445 IRAS number: 1003943 Secondary identifying numbers: ND001, CPMS 54274 Strengths and limitations - The OCTOPUS trial will be the first platform multi-arm multi-stage phase 3 trial in PMS, offering the potential to significantly expedite clinical trial processes with advantages in cost- and time-efficiency, focusing specifically on the poorly treated pathobiological processes of chronic neurodegeneration and demyelination - It will begin by assessing two promising drug candidates, immediate-release metformin and R/S-ALA, and will expand over the duration of the trial to include more drug arms under the same trial master protocol - The flexible and statistically robust trial design means that several components of the design (such as the early analysis stage 1 interim outcome) can be updated in line with evolving scientific knowledge - It will ultimately be the largest ever investigator-initiated phase 3 trial in PMS - It will include a range of national and international trial sites, including neuroscience centres and district general hospitals - It will have a high inclusion limit for age (up to 70 years) and disability (up to EDSS 8.0) - Several components (the telephone EDSS and virtual patient-reported outcome measures) will be amenable to remote collection increasing inclusivity and thus addressing public and participant suggestions, while minimising the risk of missing data - The main challenges in this trial design are the statistical and methodological complexity involved in design and implementation, and interpretation of interim trial results. Conclusion The trial launched cycle 1 in January 2023. Analysis stage 1 recruitment of 375 participants was achieved in November 2024, enabling planned interim analysis stage 1 to be conducted by late 2026 (Figure 1). On the 1st of June 2026, in the UK, 24 sites are active with a further 4 in set-up as part of stage 2, and in the Australian extension, Platform Adaptive Trial for Remyelination and Neuroprotection in Multiple Sclerosis (PLATYPUS), 1 site is active, with 9 additional sites in set-up.

25.
arXiv (CS.LG) 2026-06-17

On the Memorization Behavior of LLMs in Generative Recommendation: Observations, Implications, and Training Strategies

arXiv:2606.17276v1 Announce Type: cross Abstract: Generative recommendation (GR) has emerged as a promising direction for recommender systems. Recently, large language models (LLMs) have been increasingly adopted for GR, as their rich pretrained knowledge is expected to help them generalize beyond common user behavior patterns that traditional memorization-oriented baselines can capture. However, existing LLM-based GR works largely ignore LLMs' well-known tendency to memorize, which, if present in LLMs fine-tuned for GR, would restrict their utilization of pretrained knowledge. In this work, we investigate this concern by examining one-hop memorization, where a model recommends items that are direct successors of items in the training data. We show that LLMs do this more than non-LLM-based GR models-in fact, the vast majority of their gains over GR baselines are actually on users whose target items can be predicted through one-hop memorization. We intuit that improving performance on the remaining users requires LLMs to learn richer item-item relations beyond one-hop transitions. To achieve this, we propose IIRG, a novel training strategy that teaches LLMs to capture: (1) collaborative relations derived from item co-occurrences across multiple hops in user sequences, and (2) semantic relations among items with similar themes, both of which can serve as useful recommendation signals. We show that IIRG significantly improves over LLMs trained solely with standard next-item prediction, with especially large gains for users whose test items are not covered by train-time one-hop transitions.