Explore the Frontier of Global Academia

01.

medRxiv (Medicine) 2026-06-23 DOI: HASH:c153a6e2c0280c4459975882fb552a20

Post Hoc Localization of Beam F3 Stimulation Targets: An MRI-Derived Geodesic Approach for Refined TMS E-Field Simulations

Authors:

Schramm↗Ten Pas↗Calabro↗Jakubetz↗Szillat↗Koti↗Huang↗Kim↗S. H↗Woletz↗Kirschke↗Hedderich↗…

Background: Transcranial magnetic stimulation (TMS) targeting the left dorsolateral prefrontal cortex (dlPFC) is an established treatment option in major depressive disorder. One of the most common approaches for targeting the dlPFC is the Beam F3 method, which determines the stimulation site (F3Beam) as a function of external cranial measurements. Precise knowledge of the individual stimulation site is essential for imaging-based analyses of TMS effects. However, due to the method's reliance on individual anatomy, retrospective identification of F3Beam targets across cohorts is challenging, limiting the analysis of existing datasets. We developed a scalable method to reconstruct subject-specific F3Beam target locations for e-field simulations based on structural imaging. Methods: High-resolution three-dimensional (3D) T1-weighted MRI was used to generate individual scalp meshes via the ''Simulation of Non-Invasive Brain Stimulation'' (SimNIBS) software. Subject-specific anatomical distances and coordinates of interest were measured geodesically using a Python-based script to reconstruct the individual F3Beam targets. Validation included a retrospective comparison between digital geodesic measurements and manual cranial measurements in 20 patients and a prospective comparison with MR-visible scalp markers in 2 healthy controls. To assess the impact of our targeting algorithm on e-field simulations, volumetric e-field maps based on three potential targets (F3Beam, F3MNI, F3Geo) were generated in SimNIBS and compared using voxel-wise statistics in SPM12. Results: Retrospective analysis revealed a systematic bias towards higher in vivo measurements compared to digital geodesic measurements, though deviations in the final distances determining F3Beam (xBeam and yBeam) were minimal ({Delta}xBeam: 0.11 {+/-} 0.08 cm; {Delta}yBeam: 0.14 {+/-} 0.21 cm). Prospective validation demonstrated that F3Beam coordinates better matched in vivo coil positions than group-template-derived targets (F3MNI). Group-level analysis showed method-dependent clustering of coil positions with corresponding voxel-wise e-field differences. Conclusions: Individualized geodesic measurements may enable accurate, scalable and retrospective identification of Beam F3 targets and coil orientations. This approach may yield more accurate e-field simulations than group-template based targeting and provides a practical method for retrospective analysis of existing TMS treatment cohorts. This could be leveraged to identify response predictors or imaging-based biomarkers of treatment response.

Read & Discuss → View Source →

02.

medRxiv (Medicine) 2026-06-22 DOI: HASH:3b3a7311e1efc0bdb07a21c978ab0bea

A blinded, counterbalanced rater design for evaluating AI-assisted summarisation of tertiary clinical genomics reports: methodology of the QNOMX-VHIR-CPSP-001 Phase 1 study

Authors:

Creeden↗Olivecrona↗Soriano↗

Background. Tertiary clinical genomics reports condense layered molecular findings into documents that treating oncologists must read, translate, and act upon; manual summarisation of these reports is time-consuming and variable. Tools that assist summarisation and translation into local languages are emerging, yet the field lacks an agreed methodology for evaluating such tools before any downstream clinical use. The appropriate first endpoint is fidelity of the generated summary to its source report, assessed by qualified human raters under blinded scoring, not downstream variant classification. Methods. QNOMX-VHIR-CPSP-001 Phase 1 is a single-site, non-interventional clinical performance study conducted at Vall d'Hebron Institut de Recerca (VHIR) under ISO 20916:2019 as a Clinical Performance Study Protocol. De-identified tertiary cancer genomics reports from pediatric oncology cases are summarised by the AI-assisted summarisation system under evaluation and, in parallel, by the standard manual workflow. Qualified raters score both summary types against the source genomics report using the Quality Summary Index (QSI), a six-dimension, five-point rubric adapted from the Provider Documentation Summarization Quality Instrument, under a blinded, counterbalanced, two-period crossover with a minimum fourteen-day washout. Two co-primary composite endpoints, content and presentation, are analysed for non-inferiority under a Bayesian hierarchical model, with a frequentist linear mixed model as the convergence check. Inter-rater reliability is reported as Krippendorff's ; a Monte-Carlo power analysis of the fixed clustered design is pre-specified. Discussion. The design isolates summarisation quality from clinical decision-making by scoring both summary types against the same source report under blinding, counterbalancing, and a fourteen-day washout. Conclusion. The QSI rubric, the counterbalanced crossover, and the pre-specified Bayesian primary with frequentist convergence check define a replicable protocol for early-stage evaluation of AI-assisted summarisation in tertiary genomics reporting; observed variance components will inform sample-size determination for Phase 2.

Read & Discuss → View Source →

03.

arXiv (CS.AI) 2026-06-16 DOI: arXiv:2606.15831

An Integrated System for Real-Time Student Assessment and Career Guidance Using Neural Networks in Computing Disciplines

Authors:

Sakir Hossain Faruque↗Md. Jubair Hossain↗Sharun Akter Khushbu↗

arXiv:2606.15831v1 Announce Type: new Abstract: Many undergraduate students in Computer Science (CS) and Software Engineering (SWE) struggle to identify suitable career paths, particularly when their academic performance, abilities, and interests do not fully align. To address this issue, this study proposes an AI-driven Student Assessment and Career Prediction System that integrates a Career Guidance Expert (CGE) system with a Web-Based Student Assessment (WBSA) platform. Within the integrated framework, CGE enhances personalized career recommendations using AI while also assisting students after graduation in identifying suitable jobs, research domains, and higher study opportunities aligned with their skills and interests. The WBSA platform further strengthens interaction between students and faculty through assessments, personalized tasks, mentorship activities, and a secure real-time chat application. The CGE system employs a Multilayer Perceptron (MLP) model trained on real-world academic and extracurricular data collected using the snowball sampling method from the students of universities, achieving a validation accuracy of 94.71% in predicting personalized career paths. A pre-survey was conducted across universities to evaluate the proposed model before deployment. The WBSA system was developed as a modern web application using technologies such as Node.js, Next.js, and PostgreSQL to ensure scalability, responsiveness, and secure data management. The overall system is supported by a secure cloud-based infrastructure, the platform provides reliable performance while assisting graduates to select suitable career path in IT sector. In addition, a post-survey involving both students and faculty was conducted to gather feedback and further improve the overall effectiveness and usability of the system.

Read & Discuss → View Source →

04.

medRxiv (Medicine) 2026-06-23 DOI: HASH:b5f7a037a31b4cf9728c19c5d0d42190

Comparative Evaluation of Machine Learning and Deep Learning Models for Early Prediction of Severe Acute Pancreatitis: A Multi-Model Study Using the 2012 Revised Atlanta Classification

Authors:

stern↗

**Background:** Acute pancreatitis (AP) is a common gastrointestinal emergency with a subset of patients progressing to severe acute pancreatitis (SAP), which carries substantial morbidity and mortality. Current clinical severity scores such as BISAP, APACHE II, Ranson, and the Modified CT Severity Index require upon 48 hours of observation before reliable assessment is possible, limiting early triage. Machine learning (ML) approaches using routine admission laboratory values may enable earlier, more accurate prediction. **Methods:** We evaluated 11 models spanning three architectural families classical ML (Logistic Regression, Random Forest, Gradient Boosting), feedforward deep learning (MLP, Residual MLP, Attention MLP), and recurrent deep learning (LSTM, Stacked LSTM, Bidirectional LSTM, LSTM+Attention, CNN-LSTM) on a Chinese AP cohort of 722 patients (585 severe, 137 mild) labelled according to the 2012 Revised Atlanta Classification. Performance was assessed via 5-fold stratified cross-validation using AUC-ROC, F1 score, sensitivity, specificity, and PPV, with decision thresholds optimised for maximal F1. **Results:** Random Forest achieved the highest AUC of 0.877 (F1=0.917, sensitivity=96.8%, PPV=87.1%), followed closely by Gradient Boosting (AUC=0.874, F1=0.918). Classical ML models consistently outperformed deep learning counterparts. CNN-LSTM was the best recurrent model (AUC=0.777) but remained inferior to all classical approaches. LSTM-family models produced AUC values of 0.684-0.777, reflecting the cross-sectional tabular nature of the data. **Conclusions:** Random Forest provides robust, high-sensitivity early prediction of SAP severity using routine admission data. External prospective validation is required before clinical deployment. **Keywords:** acute pancreatitis; severity prediction; machine learning; random forest; deep learning; LSTM; Revised Atlanta Classification; early triage

Read & Discuss → View Source →

05.

arXiv (CS.LG) 2026-06-19 DOI: arXiv:2602.09689

Model soups need only one ingredient

Authors:

Alireza Abdollahpoorrostam↗Nikolaos Dimitriadis↗Adam Hazimeh↗Pascal Frossard↗

arXiv:2602.09689v2 Announce Type: replace Abstract: Fine-tuning large pre-trained models on a target distribution often improves in-distribution (ID) accuracy, but at the cost of out-of-distribution (OOD) robustness as representations specialize to the fine-tuning data. Weight-space ensembling methods, such as Model Soups, mitigate this effect by averaging multiple checkpoints, but they are computationally prohibitive, requiring the training and storage of dozens of fine-tuned models. In this paper, we introduce MonoSoup, a simple, data-free, hyperparameter-free, post-hoc method that achieves a strong ID-OOD balance using only a single checkpoint. Our method applies Singular Value Decomposition (SVD) to each layer's update and decomposes it into high-energy directions that capture task-specific adaptation and low-energy directions that introduce noise but may still encode residual signals useful for robustness. MonoSoup then uses entropy-based effective rank to automatically re-weigh these components with layer-wise coefficients that account for the spectral and geometric structure of the model. Experiments on CLIP models fine-tuned on ImageNet and evaluated under natural distribution shifts, as well as on Qwen language models tested on mathematical reasoning and multiple-choice benchmarks, show that this plug-and-play approach is a practical and effective alternative to multi-checkpoint methods, retaining much of their benefits without their computational overhead.

Read & Discuss → View Source →

06.

arXiv (CS.AI) 2026-06-16 DOI: arXiv:2606.15709

AI-Driven Framework for Adaptive Water Network Management with Proof-of-Concept Implementation: Addressing Non-Revenue Water in Jordan

Authors:

Mohammed Fasha↗Nahel Al-Maayta↗Bilal Sowan↗Mohammad Athamneh↗Husam Barham↗

arXiv:2606.15709v1 Announce Type: new Abstract: Jordan faces severe water scarcity with 50\% of water produced is lost to leakage, theft and metering issues also known as non-revenue water (NRW). Traditional reactive approaches have proven insufficient for sustained NRW reduction. This paper proposes an intelligent framework integrating EPANET hydraulic modeling, digital twin technology, SCADA systems, and large language model (LLM)-based AI agents for continuous network monitoring and adaptive decision-making. The system combines real-time data streams with physics-based simulation to detect anomalies, employing retrieval-augmented generation (RAG) for policy interpretation and function calling for network control. A proof-of-concept implementation validates technical feasibility using EPYT with offline LLMs (llama3.1:8b via Ollama) on a 1,164-junction Amman district network. The system demonstrates automated hydraulic simulation, flow-based anomaly detection aligned with water distribution zone (DZ) practice, and AI-generated health reports with response times under 2 minutes and zero API costs. Burst detection relies on local flow anomaly analysis: a 30.1~L/s simulated leak produces measurable flow redistribution in 15 pipes, flagging a 15-junction cluster that localises the burst – confirming alignment with water distribution zone (DZ) monitoring practice. The framework accommodates Jordan's intermittent supply patterns and limited automation through phased implementation, offering a scalable pathway for water-scarce regions to leverage intelligent automation for NRW reduction and operational efficiency.

Read & Discuss → View Source →

07.

PLOS Computational Biology 2026-06-17 DOI: HASH:040b0a8363b4c3bddeb4710d94840fa9

Machine learning-driven identification of virulence determinants in <i>Borrelia burgdorferi</i> associated with human dissemination

Authors:

Hoa Thanh Nguyen↗

by Hoa Thanh Nguyen, Catherine A. Brissette Lyme disease, the most common tick-borne infectious disease in the United States, presents with highly variable clinical outcomes, ranging from localized erythema migrans to severe disseminated complications affecting the heart, joints, and nervous system. The bacterial determinants underlying this phenotypic variation remain largely unknown, limiting our ability to predict disease progression and optimize treatment strategies. Here, we applied machine learning (ML) approaches to identify specific amino acid residues within surface-exposed virulence factors that predict human dissemination phenotypes. Utilizing the published whole genome sequences from 299 clinical Borrelia burgdorferi isolates collected from the United States and Slovenia over a 30-year period (1992–2021), we extracted and characterized translated amino acid sequences (variants) of seven known virulence factors (BB_0406, BBK32, DbpA, OspA, OspC, P66, and RevA). Protein variants were classified based on their association with disseminated versus localized infections using clinical metadata. Cramér’s V analysis revealed possible strong associations between dissemination phenotypes and five adhesins: BBK32, DbpA, OspC, P66, and RevA. We developed ML models using five algorithms with multiple feature selection strategies, achieving robust predictive performance for DbpA, OspC, and RevA variants (all performance metrics > 0.7). Feature importance analysis identified 57, 29, and 42 key predictive residues for DbpA, OspC, and RevA, respectively. Notably, B-cell epitope prediction revealed significant enrichment of ML-identified residues within predicted epitope regions for OspC (11 overlapping residues, OR = 3.57, p = 0.006) and RevA (12 overlapping residues, OR = 2.37, p = 0.048), suggesting these residues may influence immune recognition and bacterial persistence. This study establishes the first computational framework linking Borrelia protein sequence variants to clinical dissemination phenotypes, providing molecular insights into Lyme disease pathogenesis that may inform the development of improved diagnostics and therapeutic targets.

Read & Discuss → View Source →

08.

arXiv (CS.LG) 2026-06-12 DOI: arXiv:2606.12930

Is Spurious Correlation Removal Always Learnable?

Authors:

Yibo Zhou↗Bo Li↗Hai-Miao Hu↗Hanzi Wang↗Xiaokang Zhang↗Ruifan Zhang↗

arXiv:2606.12930v1 Announce Type: new Abstract: Invariant learning can fail even when the invariant structure is statistically identifiable. We show a conditional computational barrier: under a black-box samplable supervised sparse recovery primitive motivated by average-case sparse-recovery reductions, there exist samplable multi-environment instances with a one-dimensional predictive invariant subspace ($k=1$) that are learnable with polynomial samples by exhaustive search, while any polynomial-time constant-accuracy recovery algorithm would contradict the primitive. We further quantify environment diversity by a separation parameter $\gamma$, which controls identifiability and the curvature of invariance objectives. Under sufficient diversity and local Gaussian regularity, the minimax risk is $\mathbb{E}[\dist(\hat{V},V_{\mathrm{inv}})^2]=\Theta(k(d-k)/(n|\mathcal{E}|))$, and under label-induced shifts a phase transition occurs at $n^*\propto k(d-k)/(|\mathcal{E}|\gamma^2)$ with refined estimation error scaling proportional to $1/\gamma^2$. Synthetic and real datasets illustrate the predicted gaps and transitions and motivate simple diversity diagnostics.

Read & Discuss → View Source →

09.

arXiv (CS.CV) 2026-06-17 DOI: arXiv:2606.17188

Not Truly Multilingual: Script Consistency as a Missing Dimension in VLM Evaluation

Authors:

Prabhjot Singh↗Bhushan Pawar↗Madhu Reddiboina↗Rajvee Sheth↗

Current multilingual evaluations for Vision-Language Models (VLMs) assume a one-to-one mapping between language and orthography, overlooking billions of users of multi-script languages. We introduce PuMVR (Punjabi Multimodal Visual Reasoning), a benchmark of 1,000 strictly parallel image-text instances across Punjabi's three active scripts: Gurmukhi, Shahmukhi, and Roman. Evaluating 10 state-of-the-art VLMs, we expose a substantial and systematic Script Gap. Models frequently solve visual tasks in one script while failing identical tasks in another, with accuracy deltas reaching 16%. Crucially, visual input boosts absolute performance uniformly yet does not close the orthographic gap. Furthermore, cross-script in-context transfer is highly brittle, exposing script-locked knowledge representation. Supported by McNemar tests across all script pairs, our findings demonstrate that current "multilingual" VLMs are not truly multi-script. We propose the Script Consistency Rate (SCR), which falls as low as 24.8% on our benchmark, as a mandatory metric for script-agnostic evaluation to ensure equitable AI access. Data and code are available at: https://github.com/prabhjotschugh/Not-Truly-Multilingual-PuMVR.

Read & Discuss → View Source →

10.

arXiv (CS.AI) 2026-06-15 DOI: arXiv:2510.02695

RAMAC: Multimodal Risk-Aware Offline Reinforcement Learning and the Role of Behavior Regularization

Authors:

Kai Fukazawa↗Kunal Mundada↗Iman Soltani↗

arXiv:2510.02695v3 Announce Type: replace-cross Abstract: In safety-critical domains where online data collection is infeasible, offline reinforcement learning (RL) is attractive only if policies achieve high returns without catastrophic lower-tail risk. Prior work on risk-averse offline RL achieves safety at the cost of either (i) value/model-based pessimism or (ii) restricted policy classes that limit expressiveness, whereas diffusion/flow-based expressive generative policies have largely been used in risk-neutral settings. We introduce Risk-Aware Multimodal Actor-Critic (RAMAC), a simple, modular, model-free framework that couples an expressive generative actor (e.g., diffusion/flow) with a distributional critic and optimizes a composite objective that combines Conditional Value-at-Risk (CVaR) with behavioral cloning (BC), enabling risk-sensitive learning in complex multimodal scenarios. Since out-of-distribution (OOD) actions are a major driver of catastrophic failures in offline RL, we further provide an objective-level analysis showing that controlling behavior divergence via BC suppresses OOD actions and stabilizes CVaR. Instantiating RAMAC with a diffusion actor, we illustrate these insights on a 2-D risky bandit and evaluate on Stochastic-D4RL, observing consistent gains in $\mathrm{CVaR}_{0.1}$ while maintaining strong returns. The code and experimental results are available on the \href{https://kaifukazawa.github.io/ramac-project/} {project website}

Read & Discuss → View Source →

11.

arXiv (CS.LG) 2026-06-18 DOI: arXiv:2606.18774

RouteJudge: An Open Platform for Reproducible and Preference-Aware LLM Routing

Authors:

Guannan Lai↗Haoran Hu↗Han-Jia Ye↗

arXiv:2606.18774v1 Announce Type: new Abstract: We present RouteJudge, an online pairwise preference evaluation framework for LLM routing systems, with a public platform available at https://routejudge.cn. Different from model-level response evaluation, RouteJudge focuses on router-level decision quality. For each user query, multiple routing strategies independently recommend candidate models under the same model pool and budget constraints. The selected model responses are then presented to users through anonymous pairwise comparisons, and the resulting user preferences are attributed back to the routing strategies behind the compared responses. Each evaluation record stores the query, routing decisions, model responses, preference labels, cost, latency, and task metadata, enabling preference-aware, cost-aware, and task-conditioned analysis of LLM routers. To support the continuous expansion of routing methods in RouteJudge, we further release ORBIT (Optimal Routing and Budgeted Inference Toolbox), a modular and extensible toolbox that standardizes the end-to-end workflow of LLM routing. ORBIT provides unified interfaces for benchmark loading, query representation, router implementation, budget-aware evaluation, and method comparison, allowing researchers to develop and evaluate routing algorithms under consistent protocols. It also serves as the submission and integration layer for RouteJudge: researchers can implement routing methods within ORBIT, validate them on existing routing benchmarks, and submit compatible routers for online preference-based evaluation. The code of ORBIT is available at https://github.com/AIGNLAI/LAMDA-ORBIT.

Read & Discuss → View Source →

12.

arXiv (CS.CV) 2026-06-11 DOI: arXiv:2605.02849

Active Sampling for Ultra-Low-Bit-Rate Video Compression via Conditional Controlled Diffusion

Authors:

Amirhosein Javadi↗Shirin Saeedi Bidokhti↗Tara Javidi↗

Diffusion models provide a powerful generative prior for perceptual reconstruction at ultra-low bitrates, but effective video compression requires controlling the generative process using highly compact conditioning signals. In this work, we present ActDiff-VC, a diffusion-based video compression framework for the ultra-low-bitrate regime. Our method partitions videos into variable-length segments, transmits keyframes only when needed, and summarizes temporal dynamics using a compact set of tracked point trajectories. Conditioned on these sparse signals, a conditional diffusion decoder synthesizes the remaining frames, enabling perceptually realistic reconstruction under severe rate constraints. To support this design, we introduce two mechanisms: content-adaptive keyframe selection and budget-aware sparse trajectory selection, which together enable compact yet effective conditioning for generative reconstruction. Experiments on the UVG and MCL-JCV benchmarks show that ActDiff-VC achieves up to 64.6\% bitrate reduction at matched NIQE, improves KID by up to 64.6\% and FID by up to 37.7\% at comparable bitrates against strong learned codecs, and delivers favorable perceptual rate–distortion trade-offs relative to learned and diffusion-based baselines in the ultra-low-bitrate regime.

Read & Discuss → View Source →

13.

medRxiv (Medicine) 2026-06-13 DOI: HASH:06b4c248f30250cdded45c1a9bb0b039

Projected population level impact and cost-effectiveness of clinic and community-based tuberculosis screening approaches

Authors:

McCreesh↗Khan↗P. Y↗Yoon↗Govender↗Sithole↗Houben↗R. M↗White↗R. G↗Grant↗A. D↗…

The South Africa National Department of Health have set ambitious targets to scale up TB testing, focusing primarily on clinic attendees. In the context of declining funding for TB care and prevention, the most cost-effective approaches for targeting testing should be identified. We developed a mathematical model of TB in South Africa, explicitly incorporating clinic attendance by sex and HIV/ART status. We simulated six screening approaches over 2026-2035 (individually and in combination): three clinic-based (symptom screening, intensified targeted universal TB testing [TUTT, symptom-agnostic sputum testing of clinic attendees in key risk groups], and intensified TUTT allowing saliva samples) and three targeted community-based (community radiographic screening, symptom screening, and universal Xpert Ultra testing), each implemented at a range of coverage levels. Model outputs were combined with a mechanistic cost function to estimate potential impact and cost-effectiveness from a societal perspective. The most cost-effective standalone approach was community radiographic screening at 10% annual population coverage, with an incremental cost-effectiveness ratio (ICER) of $421 per disability-adjusted life year (DALY) averted. 10/11 scenarios along the expansion path included community radiographic screening at progressively higher coverage, combined with a clinic-based approach. Combining complementary approaches to reach both groups at increased risk of TB (e.g. clinic-based screening) and groups with lower screening coverage (e.g. community-based screening) may increase cost-effectiveness of TB screening, compared to standalone approaches. When designing TB screening strategies, both population risk and existing screening coverage should be considered.

Read & Discuss → View Source →

14.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2606.16868

Federated Medical Image Segmentation under Real-World Label Noise: A Benchmark Suite for Noisy Label Learning Method Selection

Authors:

Markus Bujotzek↗Dimitrios Bounias↗Stefan Denner↗Ralf Floca↗Maximilian Fischer↗Peter Neher↗Klaus Maier-Hein↗

While federated learning (FL) enables collaborative medical image segmentation without centralizing sensitive data, real-world deployment is frequently complicated by cross-site label imperfections such as contour disagreement, missing or additional structures, and confused labels. Federated noisy label learning (FNLL) aims to mitigate these effects, yet remains underused in practice as existing evidence is largely based on synthetic noise, simplified settings, and limited real-world noisy evaluation. We address this gap by introducing a benchmark suite that combines diverse real-world noisy datasets, deployment-relevant client-noise scenarios, and label-noise-targeted evaluation to support systematic FNLL assessment and informed method selection. The suite combines curated real-world noisy medical image segmentation datasets from diverse sources with a comprehensive federated segmentation framework including various client-noise scenarios and noise-targeted evaluation. The presented suite provides a realistic and discriminative basis for FNLL evaluation in medical image segmentation and establishes a reusable foundation for fair benchmarking, dataset-specific label-noise characterization, and future method development under realistic federated settings. Code is available at https://github.com/MIC-DKFZ/FedSegNoiseBench.

Read & Discuss → View Source →

15.

arXiv (CS.AI) 2026-06-12 DOI: arXiv:2606.12603

From Imitation to Alignment: Human-Preference Flow Policies for Long-Horizon Sidewalk Navigation

Authors:

Honglin He↗Zhizheng Liu↗Yukai Ma↗Bolei Zhou↗

arXiv:2606.12603v1 Announce Type: cross Abstract: Autonomous long-horizon sidewalk navigation is essential for micro-mobility applications such as robotic food delivery and assistive electronic wheelchairs. Unlike autonomous driving on the road, long-horizon sidewalk navigation requires precise maneuvering through unpredictable sidewalk terrains and pedestrians, with a lightweight perception stack as minimal as a single monocular RGB camera. While imitation learning (IL) from demonstrations offers a practical solution, the resulting autopilot policy often suffers from compounding errors, a lack of social compliance on sidewalks, and deficiencies in counterfactual reasoning to handle complex situations. To address these challenges, we introduce FlowPilot, a mapless navigation policy that achieves robust and efficient long-horizon navigation performance using only a monocular RGB camera. We first propose to use anchored flow matching as an action representation for policy pre-training on large-scale robot fleet data and to capture the diverse, complex, multimodal distribution of sidewalk navigation behaviors. To bridge the gap between imitation and alignment, we further design a human-in-the-loop preference learning scheme to tune the policy on a small amount of human intervention data. It strengthens the model's counterfactual reasoning and social compliance on sidewalks. We evaluate FlowPilot through extensive simulation and real-world experiments in diverse sidewalk environments. FlowPilot achieves 42% success rate and 66% route completion in simulation, while FlowPilot-HP further improves real-world robustness and social compliance, reducing IR by 40.0% and NIR by 52.1% relative to the base model.

Read & Discuss → View Source →

16.

arXiv (quant-ph) 2026-06-12 DOI: arXiv:2606.13010

QuBE/Qubex: an integrated hardware-software system for superconducting qubit experiments with broadband control

Authors:

Akinori Machino↗Kazuhisa Ogawa↗Takefumi Miyoshi↗Hidehisa Shiomi↗Shinichi Morisaka↗Ryo Matsuda↗Nilton F. G. Filho↗Koichiro Ban↗Takafumi Miyanaga↗Keisuke Koike↗Ryutaro Ohira↗Toshi Sumida↗…

arXiv:2606.13010v1 Announce Type: new Abstract: Achieving high-fidelity operation in large-scale superconducting qubit systems requires not only control hardware with broad frequency coverage, low crosstalk, and tight synchronization but also software that coordinates system configuration, experiment execution, and data analysis. Here we present an integrated qubit-control system that combines broadband microwave hardware with a pulse-level software stack for scalable superconducting qubit experiments. The hardware provides broadband microwave coverage, including an instantaneous span of up to 1.6 GHz from a control output, while the software reduces setup and calibration overhead through automated configuration and built-in experiment workflows. We validate the system on a 64-qubit fixed-frequency transmon chip through full-chip frequency identification and representative demonstrations, including multi-unit far-detuned cross-resonance calibration and benchmarking that yields a measured two-qubit gate fidelity of 98.34%, and multilevel readout beyond the computational subspace. By disclosing the hardware architecture and releasing the software stack as open source, this work provides an inspectable hardware-software foundation for scalable superconducting qubit control experiments.

Read & Discuss → View Source →

17.

arXiv (CS.CV) 2026-06-18 DOI: arXiv:2606.18658

On-Manifold Variational Learning with Heat-Kernel Priors

Authors:

Jiarui Xing↗Tal Zeevi↗Nian Wu↗Jian Wang↗

Learning unsupervised representations of medical imaging cohorts can reveal clinically meaningful prototypes without expert labels, which are often noisy and fail to capture true pathological heterogeneity. However, existing deep latent-variable models estimate Gaussian mixture priors via Euclidean averaging, producing prototypes that drift off the curved data manifold and degenerate as the number of sub-populations grows. We propose a manifold-anchored variational framework built on a geometry-aware Expectation-Maximization (EM) algorithm, whose M-step selects each sub-population prototype as the graph medoid with the highest diffusion centrality on a heat-kernel-weighted latent graph, ensuring that every prototype remains on-manifold. A Dirichlet energy regularizer enforces geometric smoothness of the latent space, and a per-sub-population uncertainty score enables label-free quality assessment. \rev{The manifold-anchored EM is a general-purpose geometric tool that extends standard EM and applies readily to other latent-variable models beyond this setting.} On cardiac scar and brain MRI benchmarks, our framework attains the highest accuracy among all compared methods, produces the sharpest prototypes reported to date, and remains stable at large sub-population counts where all baselines degenerate.

Read & Discuss → View Source →

18.

arXiv (CS.CL) 2026-06-24 DOI: arXiv:2606.24825

L3Cube-MahaPOS: A Marathi Part-of-Speech Tagging Dataset and BERT Models

Authors:

Hariom Ingle↗Ronit Ghode↗Ishwari Gondkar↗Jidnyasa Harad↗Raviraj Joshi↗

Part-of-Speech (POS) tagging is a foundational NLP task underpinning machine translation, information extraction, and syntactic parsing. Despite Marathi being spoken by over 83 million people and ranking among the top twenty most spoken languages worldwide, it remains severely under-resourced in annotated corpora and standardised evaluation benchmarks. Marathi presents unique challenges for computational modelling owing to its rich morphology, relatively free word order, lack of capitalisation conventions, and pervasive code-mixing with Hindi and English. We introduce L3Cube-MahaPOS, a gold-standard POS tagging dataset for Marathi comprising 32,354 manually annotated sentences drawn from news text. Annotation was performed entirely manually by a team of Marathi-proficient annotators following a 16-tag Universal Dependencies-aligned scheme. A structured preprocessing pipeline covering Unicode normalisation, Devanagari-aware tokenisation, and noise filtering ensures label consistency across all splits. We benchmark the dataset across six model families spanning HMM, CRF, BiLSTM, BiLSTM+CharCNN, MuRIL, and the Marathi-specific transformer MahaBERT-v2. The best system achieves 88.67\% token-level accuracy and a macro-F1 of 81.67% over 15 evaluated tag classes. We release the dataset, annotation guidelines, and trained model checkpoints to foster further research in Marathi NLP.

Read & Discuss → View Source →

19.

arXiv (CS.LG) 2026-06-16 DOI: arXiv:2511.05963

Next-Latent Prediction Transformers Learn Compact World Models

Authors:

Jayden Teoh↗Manan Tomar↗Kwangjun Ahn↗Edward S. Hu↗Tim Pearce↗Pratyusha Sharma↗Akshay Krishnamurthy↗Riashat Islam↗Alex Lamb↗John Langford↗

arXiv:2511.05963v4 Announce Type: replace Abstract: Transformers replace recurrence with a memory that grows with sequence length and self-attention that enables ad-hoc lookups over past tokens. Consequently, they lack an inherent incentive to compress history into compact latent states with consistent transition rules. This often leads to learning solutions that generalize poorly. We introduce Next-Latent Prediction (NextLat), which extends standard next-token training with self-supervised predictions in the latent space. Specifically, NextLat trains a transformer to learn latent representations that are predictive of its next latent state given the next token. Theoretically, we show that these latents provably converge towards belief states, compressed information about the history necessary to predict the future. This simple auxiliary objective injects a recurrent inductive bias into transformers while leaving their architecture, parallel training efficiency, and inference unchanged. NextLat effectively encourages transformers to form compact internal world models with coherent belief states and transition dynamics – crucial properties not guaranteed by standard next-token prediction alone. Empirically, across benchmarks in world modeling, reasoning, planning, and language modeling, NextLat demonstrates significant gains over standard next-token prediction and other baselines in downstream accuracy, representation compression, and lookahead planning. Furthermore, NextLat enables variable-length self-speculative decoding, accelerating inference by up to 3.3x in language modeling. NextLat offers a simple yet effective paradigm for learning compact, predictive representations in transformers that generalize better. Our code is available at https://github.com/JaydenTeoh/NextLat.

Read & Discuss → View Source →

20.

arXiv (CS.LG) 2026-06-19 DOI: arXiv:2606.20015

Adaptive Distance-Aware Trunk Deep Operator Learning for Long-Span Roadway Bridges

Authors:

Bilal Ahmed↗Diab W. Abueidda↗Waleed El-Sekelly↗Tarek Abdoun↗Mostafa E. Mobasher↗

arXiv:2606.20015v1 Announce Type: new Abstract: Long-span roadway bridges exhibit highly localized structural responses under vehicular loading, making repeated FE analysis computationally expensive for applications such as influence surface generation and structural digital twins. Existing SciML approaches struggle to accurately capture these localized responses. To address this challenge, this study proposes an adaptive-trunk DeepONet for localized structural response prediction in large-scale bridge systems. The framework dynamically constructs a load-dependent learning domain using a KNN strategy, allowing the network to focus on structural influence zones. The trunk network is further enhanced using distance-aware features that encode the geometric relationship between the load and structural nodes. A physics-based full-field reconstruction is incorporated through a stiffness-informed Schur complement formulation, enabling predictions at adaptive nodes to be extended to the entire structural domain. To enable scalable training, response data are generated using a reduced-order equivalent shell model that preserves the dominant global behavior while significantly reducing computational cost. The proposed framework is validated on both a benchmark bridge model and the real-world Mussafah Bridge. Results show that the method achieves FEM-level accuracy with relative errors below 5%, while reducing the total response evaluation time (including full-field reconstruction) by approximately 60x; excluding the post-processing reconstruction step, the AD-DeepONet inference is up to four orders of magnitude faster than FEM. In addition, the framework enables rapid generation of full-field responses, influence lines, and influence surfaces under arbitrary vehicular loading configurations, demonstrating strong potential for large-scale bridge analysis and digital twin applications.

Read & Discuss → View Source →

21.

arXiv (CS.LG) 2026-06-16 DOI: arXiv:2502.07209

Enhancing Physics-Informed Neural Networks Through Feature Engineering

Authors:

Shaghayegh Fazliani↗Zachary Frangella↗Madeleine Udell↗

arXiv:2502.07209v4 Announce Type: replace Abstract: Physics-Informed Neural Networks (PINNs) seek to solve partial differential equations (PDEs) with deep learning. Mainstream approaches that deploy fully-connected multi-layer deep learning architectures require prolonged training to achieve even moderate accuracy, while recent work on feature engineering allows higher accuracy and faster convergence. This paper introduces SAFE-NET, a Single-layered Adaptive Feature Engineering NETwork that achieves orders-of-magnitude lower errors with far fewer parameters than baseline feature engineering methods. SAFE-NET returns to basic ideas in machine learning, using Fourier features, a simplified single hidden layer network architecture, and an effective optimizer that improves the conditioning of the PINN optimization problem. Numerical results show that SAFE-NET converges faster and typically outperforms deeper networks and more complex architectures. It consistently uses fewer parameters – on average, 65% fewer than the competing feature engineering methods – while achieving comparable accuracy in less than 30% of the training epochs. Moreover, each SAFE-NET epoch is 95% faster than those of competing feature engineering approaches. These findings challenge the prevailing belief that modern PINNs effectively learn features in these scientific applications and highlight the efficiency gains possible through feature engineering.

Read & Discuss → View Source →

22.

arXiv (quant-ph) 2026-06-24 DOI: arXiv:2602.03834

Temperature driven false vacuum decay in coherently coupled Bose superfluids

Authors:

Paniyanchatha Moolayil Sivasankar↗Franco Dalfovo↗Alessio Recati↗Arko Roy↗

arXiv:2602.03834v2 Announce Type: replace-cross Abstract: The relaxation of a quantum field from a metastable state (false vacuum) to a stable one (true vacuum), also known as false vacuum decay, is a fundamental problem in quantum field theory and cosmology. We study this phenomenon using a two-dimensional interacting and coherently coupled Bose-Bose mixture, a platform that has already been employed experimentally to investigate false vacuum decay in one dimension. In such a mixture, it is possible to define an effective magnetization that acts as a quantum field variable. Using the Stochastic Gross-Pitaevskii equation (SGPE), we prepare thermal equilibrium states in the false vacuum and extract decay rates from the magnetization dynamics. The decay rates show an exponential dependence on temperature, in line with the thermal theory of instantons. Since the SGPE is based on complex scalar fields, it also allows us to explore the behavior of the phase, which turns out to become dynamic during decay. Our results confirm the SGPE as an effective tool for studying coupled magnetization and phase dynamics and the associated instanton physics in ultracold quantum gases.

Read & Discuss → View Source →

23.

medRxiv (Medicine) 2026-06-15 DOI: HASH:aabf6f4011b7f07849c3f928f42b5901

Quality Improvement Based Implementation and Evaluation of a Decision Aid for Patients with Nephrolithiasis

Authors:

Lee↗Kazemi↗Wilson↗Thaker↗Kwan↗Cabri↗Li↗Dunn↗Yaghoubian↗Elkhoury↗Scotland↗Saigal↗…

Introduction Patients with nephrolithiasis face challenges in making a high-quality, preference sensitive decision. Our prior work established feasibility and patient acceptance of a software-based decision aid (DA). The objectives for this study were to identify implementation strategies for the DA in routine care and determine whether DA implementation enhances decisional quality for patients. Methods New nephrolithiasis patients were recruited from the institution Medical Center from June 2018 to April 2024 to receive a software-based pre-visit DA that measured care preferences and used decision analysis to rank treatments. The RE-AIM framework and Plan-Do-Study-Act (PDSA) cycles were used to improve implementation outcomes. Patients completed survey instruments evaluating decisional conflict, shared decision-making, care satisfaction, and treatment choice following their provider visit. These metrics were compared in the DA cohort (n=81) to those in a usual care cohort (n=78) with Wilcoxon rank-sum and Chi-square (or Fishers exact) tests. Results Implementation data revealed sustained reach and progressive improvement in fidelity. The DA cohort reported higher decisional quality relative to controls (p=0.003) and reported greater support/advice to make a choice (p=0.005). The DA cohort more often discussed options with their doctor (87.5% vs 69.2%, p=0.005) and were more likely to be promoters of their provider (p

Read & Discuss → View Source →

24.

arXiv (CS.AI) 2026-06-11 DOI: arXiv:2602.20958

EKF-Based Depth Camera and Deep Learning Fusion for UAV-Person Distance Estimation and Following in SAR Operations

Authors:

Luka \v{S}iktar↗Branimir \'Caran↗Bojan \v{S}ekoranja↗Marko \v{S}vaco↗

arXiv:2602.20958v2 Announce Type: replace-cross Abstract: Vision-based Unmanned Aerial Vehicles (UAVs) frameworks aid human search tasks by detecting and recognizing specific individuals, then tracking and following them while maintaining a safe distance. A key safety requirement for UAV following is the accurate estimation of the distance between camera and target object under real-world conditions, achieved by fusing multiple image modalities. As part of the system for automatic people detection and face recognition using deep learning, in this paper we present the fusion of depth camera measurements and monocular camera-to-body distance estimation for robust tracking and following. Deep learning based filtering of depth camera data and estimation of camera-to-body distance from a monocular camera are achieved with YOLO-pose, enabling real-time fusion of depth information using the Extended Kalman Filter (EKF) algorithm. The proposed subsystem, designed for use in drones, estimates and measures the distance between the depth camera and the human body keypoints, to maintain the safe distance between the drone and the human target. Our system provides an accurate estimated distance, which has been validated against motion capture ground truth data. The system has been tested in real time indoors, where it reduces the average errors, RMSE and standard deviations of distance estimation up to 15,3% in three tested scenarios. Based on the test results, the EKF fusion-based approach increases the depth detection range by reducing the errors outside the optimal depth camera working range. It also shows improved robustness and precision in challenging conditions, such as reflections and poor visibility, making it suitable for SAR.

Read & Discuss → View Source →

25.

arXiv (CS.CL) 2026-06-16 DOI: arXiv:2606.16806

LLM-based Visual Code Completion for Aerospace Geometric Design

Authors:

Hau Kit Yong↗Robert Marsh↗Edmar A. Silva↗Andr\'as S\'obester↗Stuart E. Middleton↗

Recent advances in both Large Language Models (LLMs) and Vision Language Models (VLMs) have seen a step change in their ability to perform visual code completion, but the aerospace industry, which prioritizes safety and explainabilty over rapid LLM adoption, currently has no publicly announced LLM-based geometric design copilot systems in commercial use by aerospace Original Equipment Manufacturers (OEMs). This paper presents a LLM-based visual programming copilot application for aerospace engineering design tasks, using a visual programming variant of the ReAct methodology and GPT 5.4. In addition to the copilot, we describe Wingbuilder, a new Grasshopper plugin library with custom components for aerospace-specific geometry abstraction, and an associated Aerospace Visual Programming Dataset (AVPD) with 18 aerospace expert designed tasks at different levels of difficulty alongside ground truth solutions. We evaluate our copilot application with a user trial involving two experienced aerospace engineers from a large aircraft manufacturing company. We find our copilot visual programming ReAct methodology was successful in generating suggestions that participants found helpful, but slow ReAct inference times limit its usefulness to more complex time-consuming tasks where waiting for good copilot solution suggestion was worthwhile. Participants reported they liked the tool and would be willing to use it in the future.

Read & Discuss → View Source →