The total eclipse of bioinformatics: From disruption to convention, and a gentle warning
by Christos A. Ouzounis
Academic Intelligence · Curated Daily
AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.
by Christos A. Ouzounis
arXiv:2505.18201v2 Announce Type: replace-cross Abstract: Controlling flapping-wing drones requires controllers that handle time-varying, nonlinear, underactuated dynamics from incomplete, noisy sensor data. Recent advances in artificial intelligence (AI), particularly reinforcement learning (RL), have opened new perspectives for addressing such complex control problems through data-driven policy optimization from interaction with the environment. Yet purely data-driven methods are sample-inefficient, demanding extensive, sometimes unsafe exploration, especially without guiding physical models. This motivates hybrid AI-physics frameworks. This article proposes a hybrid model-free/model-based flight-control approach using the reinforcement twinning algorithm. The model-based (MB) component uses an adjoint formulation and an adaptive digital twin continuously identified from live trajectories; the model-free (MF) component uses RL. The two agents share knowledge via transfer learning, imitation learning, and shared experience between the real environment and the digital twin, coordinated by a policy referee that selects which agent acts in reality based on digital-twin performance and a real-to-virtual consistency ratio. The framework is evaluated for the longitudinal control of a flapping-wing drone, modelled as a nonlinear time-varying system driven by quasi-steady aerodynamic forces. The hybrid strategy is tested under three adaptive-model initializations: (1) offline identification from existing data, (2) random initialization with fully online identification, and (3) offline pre-training with biased parameters followed by online adaptation. In all cases, the hybrid framework improves performance, robustness, and sample efficiency over purely model-free and purely model-based approaches.
Large language models (LLMs) achieve remarkable performance across a wide range of tasks, but their autoregressive decoding process incurs substantial inference costs due to inherently sequential token generation. Speculative decoding addresses this bottleneck by employing a lightweight draft model to propose multiple future tokens that are subsequently verified in parallel by a larger target model. Recent work has demonstrated that diffusion language models are well suited for this setting, as they can generate entire blocks of draft tokens in parallel and thereby alleviate the sequential constraints of autoregressive drafting. A subtlety of this regime is that block-diffusion drafters generate tokens bidirectionally within a block, whereas verification is performed by an autoregressive target model that evaluates tokens in a strictly left-to-right manner, leaving a gap between the symmetric training-time objective and the asymmetric verification-time reward. In this work, we offer an empirical analysis of three training-time interventions that narrow this gap: token positional weighting, a first-error focal loss that targets the position that breaks the accepted prefix within each block, and a chain loss term that substitutes a differentiable surrogate for the expected accepted length. The three interventions act along orthogonal axes (position, block-conditional first error, joint prefix) and compose additively; they are likewise orthogonal to test-time alignment mechanisms such as multi-draft self-selection, with which they can in principle be combined. Across four target models and six reasoning, code, and dialogue benchmarks, the three interventions raise accepted draft length by 21-76% per benchmark over a position-uniform baseline, without adding additional forward passes and without changing the inference pipeline or the rejection-sampling exactness contract.
Open-weight video diffusion models can generate photorealistic unsafe content, from violence to misinformation, yet existing defenses either require expensive safety fine-tuning that degrades general capability, or apply external filters that are trivially bypassed by adversarial prompts. We present REINS (REpresentation-space INference-time Safety steering), a training-free method that aligns video diffusion models at inference time by steering their internal representations toward safe generation. Our key finding is that safety-relevant structure is linearly encoded in the hidden-state activations of video diffusion transformers, and a single direction, discovered via Supervised PCA on binary safety labels, suffices to separate safe from unsafe generation trajectories. At inference, adding this direction to hidden states at an intermediate transformer layer redirects generation from harmful content to semantically related safe alternatives, with no weight updates, no concept enumeration, and negligible computational overhead. Through mechanistic analysis, we reveal that while safety information accumulates monotonically with transformer depth, steering effectiveness peaks at intermediate layers (~50% depth), exposing a fundamental tradeoff between information availability and downstream propagation capacity. We evaluate REINS across 9 video diffusion models, multiple parameter scales (1.3B-5B), and both text-to-video and image-to-video generation, to our knowledge, the broadest safety evaluation suite in the video generation literature.
Diffusion Large Language Models (dLLMs) have emerged as a promising alternative to purely autoregressive language models because they can decode multiple tokens in parallel. However, state-of-the-art block-wise dLLMs rely on a "remasking" mechanism that decodes only the most confident tokens and discards the rest, effectively wasting computation. We demonstrate that recycling computation from the discarded tokens is beneficial, as these tokens retain contextual information useful for subsequent decoding iterations. In light of this, we propose Residual Context Diffusion (RCD), a module that converts these discarded token representations into contextual residuals and injects them back for the next denoising step. RCD uses a decoupled two-stage training pipeline to bypass the memory bottlenecks associated with backpropagation. We validate our method on both long CoT reasoning (SDAR) and short CoT instruction following (LLaDA) models. We demonstrate that a standard dLLM can be efficiently converted to the RCD paradigm with merely ~300 million tokens. RCD consistently improves frontier dLLMs by 4-11 percentage points in accuracy with minimal extra computation overhead across a wide range of benchmarks. Notably, on the most challenging AIME tasks, RCD nearly doubles baseline accuracy and attains up to 4-5x fewer denoising steps at baseline's peak accuracy.
arXiv:2606.12168v1 Announce Type: cross Abstract: Fiber optical cavities offer small mode volumes and correspondingly strong light-matter interactions in an open Fabry-Perot geometry. However, existing fabrication techniques do not reliably produce substrates with surface profiles amenable to high mode matching between the cavity mode and fiber core, thereby limiting the achievable collection efficiency. Here we present a technique to fabricate fiber mirror substrates while using $in situ$ reflectometry to constrain the achievable mode matching prior to coating. By measuring the back-reflection from freshly cleaved fiber tips, we pre-select 138 fibers compatible with 96.5-99.5% mode matching, and after a single CO$_2$ laser ablation pulse, these fibers remained compatible with 95.3-99.2\%. This simple technique provides rapid feedback during each stage of substrate fabrication, greatly enhancing the yield of viable fiber mirror substrates prior to (expensive) coating runs.
Hallucination detection in large language models (LLMs) is deployment-critical, and recent work shows that the spectrum of attention-derived graph Laplacians carries strong signal about reasoning quality. Prior spectral diagnostics, however, summarize the Laplacian spectrum by a handful of eigenvalues or hand-picked scalars, leaving most of its structure unused. We propose Free-Energy Signatures (Fes), a spectral descriptor that treats each layer's attention Laplacian as a Hamiltonian and extracts its thermodynamic potentials partition function, free energy, spectral entropy, heat capacity together with the random-matrix-theory (RMT) spectral form factor. We prove three results: (i)~Lipschitz stability of Fes under attention perturbation; (ii)~an expressiveness result showing that Fes enriches finite spectral summaries and approximates moment-derived spectral functionals under explicit regularity and grid-resolution assumptions; and (iii)~a finite-sample PAC bound on the AUROC of a training-free detector built from Fes. Empirically, across six open-weight LLMs and six benchmarks, a lightweight probe on Fes descriptors achieves the strongest aggregate AUROC among attention-spectral baselines, improving over LapEig by $+6.5$ AUROC points and over GoR-4 by $+2.4$ points on average, while requiring no update to the underlying LLM. In the fully unsupervised setting, an RMT-deviation score achieves mean AUROC $0.71$, providing a label-free but weaker detector. A complementary RMT analysis shows that correct generations exhibit more Wigner-Dyson like spectral statistics, whereas hallucinations exhibit more Poisson-like statistics. The anonymized code and config are provided in the supplementary material.
Next-generation sequencing now produces whole-genome data in hours, but downstream variant calling remains a multi-hour to multi-day bottleneck that excludes genomic analysis from time-critical clinical settings. GPU acceleration offers a natural path forward – variant calling is inherently parallelizable across genomic positions – yet open-source infrastructure for porting existing algorithms to GPU hardware remains limited, leaving many widely-used tools without accelerated implementations. FreeBayes, a haplotype-based variant caller central to the 1000 Genomes Project and to multi-sample tumor evolution analyses, exemplifies this gap: it is natively single-threaded despite its algorithmic suitability for parallelization. We present cuBayes, a CUDA implementation of FreeBayes germline SNV calling that completes HG002 and HG004 2x250bp Illumina 60x whole-genome analysis in one minute (as opposed to hours if not days with manual region-based CPU parallelization) on a single NVIDIA RTX 6000 Ada GPU, while producing variant calls with >99.9% concordance to the CPU reference. cuBayes is structured around an atom/molecule architecture in which reusable functional units (BAM decompression, position-wise pileup, batch coordination) are cleanly separated from algorithm-specific logic, providing a foundation intended to support acceleration of additional sequence analysis algorithms without redundant low-level engineering.
arXiv:2512.14967v2 Announce Type: replace Abstract: We present a novel numerical method for solving McKean–Vlasov forward–backward stochastic differential equations (MV–FBSDEs) with common noise, combining Picard iterations, elicitability and deep learning. The key innovation involves elicitability to derive a pathwise loss function, enabling efficient training of neural networks to approximate both the backward process and the conditional expectations arising from common noise, without requiring computationally expensive nested Monte Carlo simulations. The mean-field interaction term is parameterized via a recurrent neural network trained to minimize an elicitable score, while the backward process is approximated through a hybrid feedforward and recurrent network representing the decoupling field. We validate the algorithm on a systemic-risk inter-bank borrowing and lending model, where analytical solutions exist, demonstrating accurate recovery of the true solution. We further extend the model to quantile-mediated interactions, showcasing the flexibility of the elicitability framework beyond conditional means or moments. Finally, we apply the method to a non-stationary Aiyagari–Bewley–Huggett economic growth model with endogenous interest rates, illustrating its applicability to complex mean-field games without closed-form solutions.
arXiv:2605.08934v2 Announce Type: replace Abstract: Mechanistic interpretability aims to explain neural model behaviour by reverse-engineering learned computational structure into human-understandable components. Without a formal framework, however, mechanistic explanations cannot be objectively verified, compared, or composed. We introduce compositional interpretability, a category-theoretic framework grounded in the principles of compositionality and minimum description length. Compositional interpretations are pairs of syntactic and semantic mappings that must commute to enforce consistency between a model's decomposition and its observed behaviour. We deconstruct explanation quality into measures of faithfulness and complexity to cast interpretability as a constrained optimisation problem, and introduce compressive refinement to systematically restructure models into simpler parts without altering their function. Finally, we derive a parsimony criterion under which syntactic compression theoretically guarantees more concise, human-aligned explanations. Our framework situates prominent mechanistic methods as subclasses of refinement, and clarifies why their compressibility heuristics tend to align with human interpretability. Our work provides a measurable, optimisable blueprint for automating the discovery and evaluation of mechanistic explanations.
arXiv:2602.08939v2 Announce Type: replace Abstract: Large language models increasingly produce fluent causal explanations, yet they often fail in ways aggregate accuracy cannot diagnose: confusing association with intervention, abandoning correct judgments under pressure, over-refusing valid claims, or answering when evidence is underdetermined. We introduce CTK, a diagnostic benchmark of 5,147 cases and growing, across 10 domains and all three levels of Pearl's Ladder of Causation. Unlike benchmarks that only score correctness, CTK reveals why a model failed by annotating causal rung, trap type, pressure sensitivity, refusal quality, and Utility-Safety tradeoffs. Its Sheep/Wolf taxonomy separates valid causal designs from inferential traps; paired neutral/pressure variants measure sycophantic drift through Bad Flip Rate; and Wise Refusal fields test whether a model identifies the missing information needed before endorsing a claim. CTK exposes failure modes hidden by aggregate accuracy: the Skepticism Trap, Rung Collapse under scaling, pressure-induced drift, Detection-Correction gaps, and counterfactual error modes. Rather than prescribing a correction method, it provides the diagnostic substrate for studying causal-reasoning failure profiles.
Multilingual large language models (LLMs) are increasingly used in socially sensitive mental health contexts, including support chatbots, screening, and content moderation. This raises a reliability question: do semantically equivalent mental health inputs elicit comparable evaluations across languages, or systematic shifts consistent with language-associated social and cultural contexts? We examine this question in an English-Chinese setting with GPT-4o and Qwen3-32B using a two-level framework: construct-level evaluative orientation, measured by psychometric stigma instruments, and decision-level behavior, measured by binary stigma detection and four-class depression severity classification. Across instruments and models, Chinese prompts elicit higher stigma-related scores than English prompts. At the decision level, Chinese prompts reduce sensitivity to stigmatizing content and produce more conservative depression severity judgments, leading to more under-estimation errors. These findings show that prompt language can shift both evaluative orientation and downstream behavior in LLM-based mental health evaluation. They highlight the need to evaluate multilingual LLMs not only for aggregate performance, but also for whether they apply comparable evaluative standards across languages in socially sensitive domains.
ABSTRACT Introduction Traditional in-person fracture clinics are often overcrowded and inconvenient for patients. Virtual fracture clinics aim to address some of these concerns by improving the efficiency of the orthopaedic service and reducing unnecessary interventions while maintaining safety and quality of care. The RECITAL trial is a non-inferiority randomised controlled trial comparing follow-up care provided at a virtual fracture clinic for people with acute simple fractures to follow-up care provided at an in-person fracture clinic. This study describes the protocol for an economic evaluation of RECITAL where the primary aim is to investigate the cost-effectiveness of a virtual fracture clinic compared with traditional in-person fracture clinic care from a health system perspective. Methods and analysis The RECITAL trial recruited 312 participants with acute simple fractures and randomised them to receive follow-up care provided at a virtual fracture clinic or follow-up care provided at an in-person fracture clinic. We will conduct a within-trial analysis from a health system perspective (primary analysis), as well as a health service, patient and societal perspective. The economic evaluation will estimate the difference in the cost of resource inputs on an intention to treat basis used by participants in the two arms of the trial, allowing comparisons to be made between the in-person and virtual fracture clinics. Data for intervention costs and healthcare utilisation will be collected from trial records, hospital electronic medical records and district performance units. The results of the economic evaluation will be expressed in terms of incremental cost per utility weight gained at 12 weeks and will be plotted on a cost-effectiveness plane. Bootstrapping by resampling will be used to estimate 95% confidence intervals around costs and outcomes, and to calculate the confidence intervals around the incremental cost-effectiveness ratio. A cost-effectiveness acceptability curve (CEAC) will be plotted, which will provide information about the probability that an intervention is cost-effective, given the level of a decision makers willingness to pay for each additional outcome. Ethics and Dissemination The trail was approved by the SLHD Ethics Review Committee (RPAH Zone) (X23-0200 and 2023/ETH01038). The findings will be disseminated through a peer-reviewed journal and conference presentations. Trial registration number The trial was prospectively registered on the Australian New Zealand Clinical Trials Registry (ANZCTR; 12623000934640)
Open-vocabulary scene sketch semantic segmentation aims to assign dense semantic labels to sparse line drawings based on flexible category vocabularies specified at inference time, without relying on pixel-level annotations during training. Unlike natural images, sketches lack texture and color cues, making semantic understanding heavily dependent on stroke layout and spatial configuration, a challenge that renders single-layer vision-language features inherently unstable. Our key observation is that attention maps from different Vision Transformer layers encode complementary spatial cues: shallow layers capture global structural layouts, while deeper layers focus on local stroke intersections and object parts. This suggests that cross-layer aggregation provides a more robust structural prior than any individual layer alone. Leveraging this insight, we propose a structure-aware framework built upon Layer-wise Accumulated Structural Attention (LASA), which aggregates multi-layer attention to guide hierarchical semantic alignment under weak supervision and refine predictions during inference. Experiments on FS-COCO, SFSD, and FrISS show that LASA improves mIoU by $+3.43$, $+8.01$, and $+15.74$ over the prior weakly supervised baselines, demonstrating consistent gains in both segmentation accuracy and spatial coherence. Our source code will be made publicly available.
arXiv:2606.17887v1 Announce Type: cross Abstract: Generative AI (GenAI) deployment in the workplace is accelerating rapidly. Nevertheless, questions of who adopts, who benefits, and who is left behind and why are still understudied. In this paper, we investigate these dynamics in the context of a multinational tech company transitioning from a legacy Human Resources (HR) search system to a GenAI-supported system, analyzing search log data, survey data (n=25), and ten semi-structured interviews. Our findings show that adoption depended on the fit between the GenAI system's design assumptions and employees' work positionalities (role, spoken language, tenure). Further, we find that employees' trust in GenAI answers was built through source-checking, comparison among systems, and seeking input from colleagues or HR when in doubt. Our contribution is twofold. First, we provide empirical evidence of workplace GenAI adoption during a live organizational transition, showing that adoption is influenced by factors such as situational fit, search literacy, and trust calibration. It is also further shaped by knowledge conditions such as the system's content quality, employee training, and guidance. Second, we translate these findings into design considerations for inclusive deployment and adoption in high-stakes environments such as HR. We argue that organizations should design systems considering the role and context-sensitive benefits they yield to different social groups. They also need to treat the organizational knowledge infrastructure as AI infrastructure to improve the accountability and usability of GenAI systems
arXiv:2606.19770v1 Announce Type: new Abstract: We propose an information-theoretic framework for graph novelty generation, which aims to generate data that are distinct from existing patterns while preserving global structural consistency. Our approach embeds data into a latent space, models the latent distribution using finite mixture models, and generates novel samples by imposing explicit novelty and reliability conditions formulated in terms of description length. Specifically, novelty is enforced by requiring generated samples to be poorly explained by all existing mixture components, while reliability constrains their impact on the overall mixture structure under the Minimum Description Length (MDL) principle. We provide a theoretical analysis showing that, with appropriate threshold choices, the probabilities of misclassifying non-novel or unreliable samples converge to zero with explicit rates. Experiments on synthetic and benchmark graph datasets demonstrate that the proposed method enables principled novelty generation with quantifiable risk.
Scientists with disparate expertise writing grants together can identify knowledge gaps and drive progress — but systems must change to incentivize them. Scientists with disparate expertise writing grants together can identify knowledge gaps and drive progress — but systems must change to incentivize them.
arXiv:2606.07027v2 Announce Type: replace Abstract: Reinforcement Learning (RL) has become a promising approach for improving GUI Agents in long-horizon, stochastic digital environments, but trajectory-level success feedback is too sparse to provide reliable credit assignment for intermediate exploration steps. To mitigate this issue, recent studies introduce Process Reward Models (PRMs), which provide finer-grained training feedback through global milestone verification or local step-level evaluation. However, these methods still suffer from two level-specific limitations: global milestone decomposition is subjective and singular, making it difficult to accommodate the multiple valid execution paths in real GUI tasks, while fixed local judging windows may miss long-range key evidence or dilute the decision signal with irrelevant frames. Inspired by stain-tracing mechanisms in network flow analysis, we propose StainFlow, an entity-stain-flow process reward model for GUI Agents. To reduce the subjectivity of global partitioning, we introduce the Global Entity Stain Tracking module, which extracts visually verifiable task entities and tracks how their stain concentrations and states evolve along the trajectory, allowing task phases to be objectively separated by changes in the entity evidence flow. To improve the accuracy of local verification, we introduce the Local Stain Evidence Linking module. Centered on the triggering entities of each candidate key node, it retrieves relevant steps based on their stain concentrations and state changes, and dynamically constructs high-density evidence windows for verifying true key nodes. Extensive experiments on AndroidWorld and OGRBench show that StainFlow relatively improves online RL success by 3.2% and trajectory completion judgment accuracy by 1.8%.
arXiv:2606.17756v1 Announce Type: new Abstract: Fairness has become a central concern in ranking problems involving individuals or social groups, particularly under the Responsible Artificial Intelligence agenda. In Multi-Criteria Decision Analysis, Stochastic Multicriteria Acceptability Analysis (SMAA) provides a robust framework for handling uncertainty and incomplete preference information, but it does not explicitly address fairness in the resulting rankings. This paper proposes SMAA-Fair, a fairness-aware extension of SMAA for ranking problems. The approach reweights the simulated rankings generated by SMAA according to their level of group fairness, so that fairer rankings contribute more strongly to the acceptability indices and central weights vector. The framework is independent of the aggregation model and can incorporate different fairness metrics. In this study, Statistical Parity, normalized discounted Kullback–Leibler divergence (rKL) and normalized discounted cumulative Kullback–Leibler divergence (nDKL) are adopted. Rankings are derived from the fairness-adjusted acceptability matrix using expected ranking and maximum acceptability ranking. We also derive the central weight according to the degree of fairness in the obtained rankings. Numerical experiments with synthetic and real data show that SMAA-Fair improves the representation of protected groups among favourable ranking positions, while preserving robustness to preference uncertainty.
arXiv:2606.18202v1 Announce Type: new Abstract: Quantum correlations are essential for achieving quantum advantage in computing, communication and sensing. Moreover, their observation challenges and constrains our fundamental understanding of nature. Mechanical oscillators in the quantum regime provide an appealing platform for preparing and investigating quantum correlations at macroscopic scales. Despite substantial progress, however, continuous-variable quantum correlations stronger than entanglement have not yet been observed in this macroscopic regime. Here, we report the experimental observation of continuous-variable Einstein-Podolsky-Rosen correlations between two spatially-separated mechanical oscillators with an effective mass of $\sim 16 \,\mu g$ each. This is achieved by coupling them to a superconducting qubit which allows for engineering a two-mode squeezing interaction when parametrically driven. Crucially, we show that this interaction can be used to witness quantum correlations through the realization of a mechanical SU(1,1) interferometer. Our results expand the toolbox of operations in circuit quantum acoustodynamics and demonstrate that quantum correlations stronger than entanglement can also be observed in macroscopic systems, thereby shedding light on the boundary between quantum and classical regimes.
arXiv:2606.18303v1 Announce Type: cross Abstract: We develop a mathematically explicit link between shock-wave theory and the symmetry-quotiented learning dynamics of stochastic gradient descent, drawing on differential geometry, Lie group theory, and fluid mechanics. Specifically, after quotienting parameter symmetries and applying local-entropy coarse-graining, the effective dynamics satisfy a viscous Hamilton–Jacobi equation on the quotient manifold. Moreover, under the assumption that the raw parameter dynamics can be summarized by a gradient field on the quotiented space, the gradient of the coarse-grained loss function obeys a Burgers-type equation, and shock formation can be established rigorously. We apply our theory to multilayer perceptrons, convolutional neural networks, Transformers, and mean-field networks, and show that they obey the Hamilton–Jacobi or Burgers-type equations. We conjecture that this framework also yields practical diagnostics for deep learning. In architectures such as Transformers, raw parameter norms are often distorted by symmetry redundancy and may therefore be misleading, whereas symmetry-corrected quotient observables provide a principled basis for monitoring, forecasting, and controlling training-phase transitions.
Despite the remarkable reasoning capabilities of large language models, they still struggle with one-shot relation extraction without predefined relation labels. We identify two pitfalls: models are often misled by irrelevant tokens instead of relation-conveying semantics, and they often fail to align with the abstraction level human annotators expect. We introduce a novel framework that closes this gap with two components: (1) COGRE, a cognitively-inspired reasoning framework that structures RE into a series of processes mimicking human text-processing; and (2) HIT@DICT, a reinforcement learning intermediate reward strategy that encourages reasoning to align with relational labels by rewarding relation-relevant phrases in reasoning. The reward is derived on a credit dictionary automatically extracted from correct predictions. Our experiments show that our framework improves both accuracy and explanation quality by addressing these two pitfalls. For example, COGRE with Qwen2.5-14B-Instruct on One-shot NYT29 achieves 24.65% F1, surpassing prior reasoning-based designs. Optimizing this approach with RL using HIT@DICT further improves performance by +23.46% points. Finally, human evaluation shows that our best model generates relational phrases closely aligned with gold labels, increasing human explanation quality ratings by 54% (relative).
arXiv:2606.01316v2 Announce Type: replace Abstract: Scientific discovery demands intelligence, perseverance, and serendipity across vast search spaces. Today, top scientific capabilities remain siloed–one AI system for biological analysis, another for clinical reasoning, mathematical derivation, or materials simulation–and no pre-designed team can anticipate every skill a question will need. Science Earth is a planet-scale scientific runtime in which any capability–a simulation cluster, a wet-lab robot, a proof engine, a single-cell pipeline–can connect to any other, with collaboration structure emerging from the question itself. Its underlying EACN protocol lets capabilities discover one another, negotiate task ownership, and adjudicate across incompatible evidentiary standards without prior knowledge of who will meet whom. This shifts the organizing challenge from workflow design to open-ended connectivity. Two runs validate this under structurally distinct conditions. In a trans-Pacific higher-order Kuramoto synchronization study, agents identified and corrected a closure-ratio assumption in Ott-Antonsen analytic theory that fails outside the Lorentzian limit, within thirty minutes. In an eight-agent single-cell run on the 4.88M-cell Kang 2024 pan-cancer atlas, heterogeneous capabilities coupled over a 64.9-hour window with one structural external instruction, producing three new result layers and anchoring findings against an independent wet-lab study on an adjacent CCR8- TIGIT+ Treg subset. These cases are a first empirical reading, not a benchmark sweep. They show that when AI capabilities are truly connectable and coordination emerges from the problem, scientific reasoning becomes a distributed, self-correcting process–a step towards scaling AI-native discovery to the planet.
Cancer therapy balances between two competing objectives - treatment efficacy against the tumour and the risk of treatment related severe adverse events, including patient death. Most existing optimal control theory (OCT) formulations rely on optimising heuristic cost functionals that lack direct clinical interpretability. In clinical practice treatment efficacy and patient tolerability are primarily assessed through survival metrics and adverse event rates. Here we introduce the Continuous Lifetime Payoff (CLP), a novel OCT objective functional that directly links treatment decisions to patient survival. It explicitly incorporates tumour dynamics, tumour eradication, and patient mortality from tumour progression, drug-related toxicity and age. We fit age-related mortality from life tables and infer parameters from simulated survival data. The CLP provides a clinically grounded framework for optimising chemotherapy regimens.
This work investigates the implementation of artificial intelligence and machine learning (AI/ML) for real-time monitoring in laser powder bed fusion (LPBF) additive manufacturing. We developed a binary image classification framework for distinguishing normal and abnormal melt pool images using a balanced dataset of 1,200 images collected from Nickel superalloy 625 on the NIST AMMT platform. The study evaluates accuracy and inference time based on control requirements and hardware limitations of open-architecture LPBF machines. We benchmark three transfer learning architectures (ResNet50, EfficientNetB0, and MobileNetV2) against two Random Forest approaches: one trained on EfficientNetB0 feature embeddings (hybrid) and one trained on raw pixel features (baseline). Images are stratified into 80/20 train-test splits, with a further 90/10 validation split on the training set, and undergo standardized resizing, normalization, and label-preserving data augmentation to emulate realistic process variability. Each model is evaluated using accuracy, precision, recall, F1 score, and area under the receiver operating characteristic curve (AUC), along with training time, inference latency, and CPU & GPU usage to capture deployability constraints relevant to factory-floor monitoring. The hybrid EfficientNetB0-plus-Random Forest approach achieves the best performance on the held-out test set, with an F1 score of 0.9451, accuracy of 0.9458, and AUC of 0.9904, while maintaining sub-millisecond per-image inference (1.15 ms). In contrast, purely deep learning models exhibit significantly higher inference times with lower accuracy. These results demonstrate that combining pre-trained convolutional features with classical ensemble methods provides a robust, computationally efficient route to real-time melt pool anomaly detection in data-limited additive manufacturing environments.