Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.AI) 2026-06-18

Something from Nothing: Data Augmentation for Robust Severity Level Estimation of Dysarthric Speech

arXiv:2603.15988v3 Announce Type: replace-cross Abstract: Dysarthric speech quality assessment (DSQA) is critical for clinical diagnostics and inclusive speech technologies. However, subjective evaluation is costly and difficult to scale, and the scarcity of labeled data limits robust objective modeling. To address this, we propose a three-stage framework that leverages unlabeled dysarthric speech and large-scale typical speech datasets to scale training. A teacher model first generates pseudo-labels for unlabeled samples, followed by weakly supervised pretraining using a label-aware contrastive learning strategy that exposes the model to diverse speakers and acoustic conditions. The pretrained model is then fine-tuned for the downstream DSQA task. Experiments on five unseen datasets spanning multiple etiologies and languages demonstrate the robustness of our approach. Our Whisper-based baseline significantly outperforms SOTA DSQA predictors such as SpICE, and the full framework achieves an average SRCC of 0.761 across unseen test datasets.

02.
arXiv (CS.CV) 2026-06-19

FrozenDrive: Zero-Shot Text-Guided Driving Scene Generation and Data Augmentation with Parameter-Free Frozen Diffusion Model

Synthetic data for autonomous driving is surging, powered by diffusion models that promise scalable scene generation. Yet key obstacles remain, as enforcing multi-view and temporal consistency often relies on backbone fine-tuning or added layers, which erodes pre-trained knowledge and weakens text alignment. Models also stay close to the training distribution, struggling under adverse weather and unseen configurations, and fidelity favors frequent over rare classes. We address these gaps with FrozenDrive, a controllable generative framework that preserves a pretrained diffusion models knowledge while achieving strong consistency. FrozenDrive conditions on rich driving-stack signals and text prompts, and introduces knowledge-preserving spatio-temporal attention to impose cross-view alignment and temporal coherence in a single pass within a parameter-free frozen diffusion backbone. An additional object-focused constraint improves per-object fidelity for rare categories. Without any weather- or scene-specific fine-tuning, our model synthesizes globally coherent multi-view driving scenes from text, particularly under adverse and rare conditions, and surpasses prior baselines. On nuScenes, FrozenDrive augmented data significantly improves AD models performance, especially at night and in rain, demonstrating stronger robustness when trained with our scenario-targeted data.

03.
arXiv (CS.CV) 2026-06-12

Camera and LiDAR BEV Fusion for Cooperative 3D Object Detection on TUMTraf V2X

We describe a Camera and LiDAR fusion detector developed for the TUMTraf V2X cooperative 3D object detection track of the DriveX 2026 challenge. The detector fuses three roadside cameras with a fused infrastructure-plus-vehicle point cloud in a shared bird's-eye-view space and predicts boxes through a CenterPoint-style head with a generalized IoU regression loss and an IoU quality re-ranking head. Trained on the provided train and validation splits, the model reaches a 3D mAP of 0.85 on the public Codabench test split. While iterating on the system, we observed that 44 of the 50 test frames are also present in the released train (40) and validation (4) splits with their labels. We therefore conducted two additional studies to quantify how this overlap affects the final score: (1) a finetuning run that oversamples the 44 overlapping frames, reaching 0.89 mAP, and (2) a post-processing run that replaces predictions on those frames with the released ground truth, reaching 0.99 mAP (uploaded to our Codabench account for testing but not published on the leaderboard). All three configurations and their per-class results are reported.

04.
arXiv (CS.LG) 2026-06-11

Mechanisms of Introspective Awareness

arXiv:2603.21396v5 Announce Type: replace Abstract: Recent work has shown that LLMs can sometimes detect when steering vectors are injected into their residual stream and identify the injected concept – a phenomenon termed "introspective awareness." We investigate the mechanisms underlying this capability in open-weights models. First, we find that it is behaviorally robust: models detect injected steering vectors at moderate rates with 0% false positives across diverse prompts and dialogue formats. Notably, this capability emerges specifically from post-training; we show that preference optimization algorithms like DPO can elicit it, but standard supervised finetuning does not. We provide evidence that detection cannot be explained by simple linear association between certain steering vectors and directions promoting affirmative responses. We trace the detection mechanism to a two-stage circuit in which "evidence carrier" features in early post-injection layers detect perturbations monotonically along diverse directions, suppressing downstream "gate" features that implement a default negative response. This circuit is absent in base models and robust to refusal ablation. Identification of injected concepts relies on largely distinct later-layer mechanisms that only weakly overlap with those involved in detection. Finally, we show that introspective capability is substantially underelicited: ablating refusal directions improves detection by +53%, and a trained bias vector improves it by +75% on held-out concepts, both without meaningfully increasing false positives. Our results suggest that this introspective awareness of injected concepts is robust and mechanistically nontrivial, and could be substantially amplified in future models. Code: https://github.com/safety-research/introspection-mechanisms.

05.
medRxiv (Medicine) 2026-06-11

Assessment of occupational aerosol exposure for laboratory technicians: A quantitative study using {Phi}X174 phage as a substitute virus

Authors:

This study aimed to clarify aerosol exposure risks throughout the workflow of a Biosafety Level 2 (BSL-2) polymerase chain reaction (PCR) laboratory, validate the suitability of the {Phi}X174 bacteriophage as an indicator virus, and provide evidence for biosafety control measures. The {Phi}X174 bacteriophage was used to simulate viral samples, and a concentration-bacteriophage plaque standard curve was constructed (R2=0.998). Five operational steps in a simulated PCR laboratory were quantitatively monitored for aerosol concentration using double-layer agar plates, with blank controls used to eliminate interference. Statistical analysis was employed to identify risk differences. Sample homogenization ((5.67 {+/-} 1.23) x 104 plaque-forming units (PFU)/m3) and nucleic acid extraction ((3.45 {+/-} 0.89) x 104 PFU/m3) were identified as high-/very high-risk steps. The viral load in the samples was strongly positively correlated with the aerosol concentration (r = 0.926, P

06.
arXiv (CS.AI) 2026-06-19

Variable-Length Tokenization via Learnable Global Merging for Diffusion Transformers

arXiv:2606.20076v1 Announce Type: cross Abstract: Latent Diffusion Models (LDMs) have become dominant in visual synthesis, but their quality-compute trade-off is largely constrained by the tokenizer's fixed compression ratio. Variable-length tokenizers (VLTs) promise adaptive compression by varying token counts, allowing diffusion models to flexibly balance quality and compute. However, conventional VLTs modulate length by truncating ordered token sequences, which makes token semantics depend on token position and breaks representational alignment across lengths. This leads to a cross-length shift in the latent distribution that hinders a single variable-length diffusion model from operating effectively. To address this, we propose a novel variable-length tokenizer that modulates length by merging tokens. We show that encouraging similar tokens to merge enables direct cross-length representation alignment when the diffusion transformer operates according to the merging pattern. Since conventional merging methods are data-dependent, making the merging pattern inaccessible during generation, we introduce learnable global merging, which is data-independent, to ensure compatibility with diffusion transformers. On ImageNet 256$\times$256 generation, our merging-based variable-length tokenizer integrated with a diffusion transformer achieves a superior gFID-compute trade-off compared to prior VLT methods. Code is available at [this https URL](https://github.com/movinghoon/lgm)

07.
arXiv (CS.AI) 2026-06-16

EChO-Agent: Evidence Chain Orchestration Agent for Audio Reasoning

arXiv:2606.15141v1 Announce Type: cross Abstract: While LALMs show promise on audio question answering, they fail to focus on question-relevant segments of audio and provide a clear, checkable reasoning process when dealing with complex audio reasoning. Reinforcement learning and tool-augmented prompting can help models better relate questions to audio but lack a reliable way to understand, integrate, and self-verify audio segments. To address this gap, we present EChO-Agent, a modular agent framework that reformulates complex audio QA as a planning, tool execution, evidence integration, and answer verification workflow. Experiments on MMAR benchmark show EChO-Agent improves both accuracy and rubric scores over baseline and ablation studies show evidence integration is the key factor.

08.
arXiv (CS.LG) 2026-06-11

Online Learning for Supervisory Switching Control

arXiv:2603.14762v4 Announce Type: replace-cross Abstract: We study supervisory switching control for partially-observed linear dynamical systems. The objective is to identify and deploy a suitable controller for the unknown system by periodically selecting among a collection of $N$ candidate controllers, some of which may destabilize the underlying system. While classical estimator-based supervisory control guarantees asymptotic stability, it lacks quantitative finite-time performance bounds. Conversely, current non-asymptotic methods in both online learning and system identification require restrictive assumptions that are incompatible in a control setting, such as system stability, which preclude testing potentially unstable controllers. To bridge this gap, we propose a novel, non-asymptotic analysis of supervisory control that adapts multi-armed bandit algorithms to a control-theoretic setting. The proposed data-driven algorithm evaluates candidate controllers via scoring criteria that leverage system observability to isolate the effects of state history, enabling both detection of destabilizing controllers and accurate system identification. We present two algorithmic variants with dimension-free, finite-time guarantees, where each identifies the matching controller in $O(N \log^2 N)$ steps, while simultaneously achieving finite $L_2$-gain with respect to system disturbances.

09.
arXiv (CS.AI) 2026-06-19

CTS-MoE: Implicit Terrain Adaptation via Mixture-of-Experts for Perceptive Locomotion

arXiv:2606.19633v1 Announce Type: cross Abstract: Perceptive legged locomotion over discontinuous terrain (e.g., stairs, gaps, and obstacles) requires adaptive behavior, as a single conservative gait cannot produce the anticipatory maneuvers needed for abrupt topology changes. Cast as multi-task reinforcement learning, this problem introduces a tension between sharing and separation. Tasks use a common locomotion base but have conflicting rewards, so a policy must share behavior while avoiding value interference. Prior work addresses only one side, with monolithic policies sacrificing specialization and hierarchical sub-policies sacrificing generalization across transitions and unseen terrain. We propose CTS-MoE, which combines a dense mixture-of-experts actor with perception-based gating to compose shared behaviors and a multi-critic with task-specific value heads to prevent interference. The model is trained end-to-end in a single-stage concurrent teacher-student setup that handles partial observability and avoids sequential distillation, with task labels used only during training. At deployment, routing depends solely on perception, allowing terrain adaptation without a high-level selector or terrain classifier. Experiments on a Unitree Go1 in simulation and on hardware across seen and unseen terrains show task-aware specialization, with lower tracking error and higher success rates than monolithic baselines. Project Website: https://cts-moe.github.io/ .

10.
arXiv (CS.CV) 2026-06-15

NEST3D: A High-Resolution Multimodal Dataset of Sociable Weaver Tree Nests

Sociable weaver nests function as complex ecological structures offering thermoregulatory microhabitats and sustaining diverse species; however, datasets used in prior studies lack fine-grained 3D structural detail. Producing usable and accurate 3D weaver nest data is challenging due to their irregular geometry and integration with complex host vegetation. We bridge this gap with an open-access, 1.4 TB multimodal drone dataset of 104 nest-bearing trees, comprising 27,945 RGB images, 111,780 multispectral images, approximately 781 million 3D points, and expert-annotated semantic segmentation labels. We benchmark semantic segmentation using KPConv, RandLA-Net, and Point Transformer V3, with PT-v3 achieving an mIoU of 86.35% on the test set. While the results demonstrate strong performance for transformer-based and point-wise methods, they also highlight architecture-dependent challenges, particularly for convolution-based approaches such as KPConv. By uniquely combining spectral, spatial, and structural information, the presented dataset advances 3D reconstruction, segmentation, and classification algorithms, enabling ecological applications from nest volume estimation to species conservation, and serves as a demanding benchmark that exposes architecture-dependent performance under extreme class imbalance.

11.
arXiv (CS.CV) 2026-06-15

Pix2Pix-Hybrid: Structure-Guided Conditional Synthesis of Hajj Crowd Images with Multi-Channel Conditioning and Weak Attribute Supervision

Developing accurate crowd-counting models for Hajj pilgrimage scenes remains challenging because domain-specific annotated images are scarce and data collection during large gatherings raises privacy concerns. To address these limitations, this paper proposes Pix2Pix-Hybrid (P2P-H), a hybrid conditional GAN for structure-guided Hajj crowd-image synthesis and data augmentation. P2P-H builds on Pix2Pix and employs a U-Net generator conditioned on eight input channels that jointly encode structural cues (edges and grayscale) and contextual attributes (crowd density and time of day). To capture detailed textures in dense scenes, the framework integrates two multi-scale PatchGAN discriminators operating at different resolutions. The training procedure combines adversarial, perceptual, and feature-matching objectives with adaptive data augmentation and stabilization strategies. The model was trained on 993 real Hajj frames collected from 60 publicly available video sources, with conditioning attributes derived automatically to reduce manual labeling effort. Using this framework, we constructed CrowdH, a synthetic dataset of 10,000 high-resolution Hajj crowd images. Experimental results show that P2P-H improves structure-preserving conditional synthesis quality compared with Pix2Pix and StyleGAN2-ADA baselines and shows favorable transfer to other crowd datasets. To assess downstream utility, we further constructed CrowdH-Mix-469, an annotated mixed real-synthetic dataset comprising 384 real Hajj images and 85 selected synthetic images,and evaluated five crowd-counting models under real-only and real-plus-synthetic training. The selected synthetic data reduced MAE across all five models, with the strongest gain observed for CSRNet.

12.
arXiv (CS.AI) 2026-06-11

Mind the Perspective: Let's Reason Recursively for Theory of Mind

arXiv:2606.11724v1 Announce Type: new Abstract: Theory of Mind (ToM) reasoning requires inferring agents' beliefs from partial and asymmetric observations, which remains an open challenge for LLMs. Existing prompting-based approaches improve ToM reasoning through observable-event filtering or temporal belief chains, without explicitly modeling nested beliefs. We introduce RecToM, an inference-time framework for ToM reasoning that models nested beliefs via recursive perspective construction. RecToM constructs each character perspective from the preceding character perspective along the character chain specified by the question, reducing higher-order belief questions to actual-world questions within the final constructed perspective. We further provide a KD45 analysis showing that RecToM's perspective construction induces a well-formed belief modality beyond simple event filtering. Experiments on ToM benchmarks, including Hi-ToM, Big-ToM, and FanToM, across multiple LLM backbones show that RecToM consistently outperforms recent advanced approaches, achieving state-of-the-art performance. Notably, RecToM reaches 100\% accuracy on Hi-ToM with GPT-5.4 and Qwen3.5, a benchmark requiring higher-order ToM reasoning.

13.
arXiv (CS.CV) 2026-06-17

SceneCompleter: Dense 3D Scene Completion for Generative Novel View Synthesis

Generative models have shown great promise for novel view synthesis (NVS) by leveraging strong image generation priors. However, existing approaches typically follow a 2D inpainting paradigm, first completing missing image regions and then performing 3D reconstruction. This strategy often causes geometry distortion and appearance drift, as 2D inpainting models cannot reliably infer the underlying 3D structure required for cross-view consistent generation. In this paper, we propose SceneCompleter, a geometry-aware framework that reformulates generative NVS as dense 3D scene completion. Instead of hallucinating isolated 2D views, SceneCompleter jointly completes geometry and appearance through a geometry-appearance dual-stream diffusion model in a spatially aligned RGBD latent space. To provide holistic scene context, we further introduce a Scene Embedder that conditions generation on global semantic and stylistic information from reference images. The completed RGBD predictions are then aligned and integrated into an expandable 3D scene representation, enabling iterative and coherent scene completion. Extensive experiments on in-domain and out-of-distribution datasets demonstrate that SceneCompleter produces visually plausible and geometrically consistent novel views across diverse scenarios. Project Page: https://chen-wl20.github.io/SceneCompleter

14.
arXiv (CS.CV) 2026-06-18

Physics in 2-Steps: Locking Motion Priors Before Visual Refinement Erases Them

Image-to-Video diffusion models leverage input images to generate visually stunning content, yet frequently produce motion that violates physical laws. We reveal a surprising finding: a 2-step generation often exhibits better physical consistency than a 50-step output from the same model. Through spectral analysis, we trace this to phase erosion during denoising; the phase degrades significantly (dropping by $\approx 18\%$ from step 2 to step 50), whereas the magnitude remains relatively stable. Building on this insight, we propose PhaseLock, a training-free framework that preserves the valid motion priors from few-step inference throughout the denoising trajectory. Rather than relying on full-step inference for physical consistency, PhaseLock extracts a motion prior from just 2 steps and enforces it onto high-fidelity generation via Latent Delta Guidance. Our approach effectively mitigates phase degradation, improving physical consistency by an average of 6.2 points across diverse models while largely maintaining visual fidelity, with negligible overhead ($1.06\times$ time, $1.02\times$ memory) and reduced reliance on expensive external guidance methods ($\sim5\times$ time). Project Page: https://dnwjddl.github.io/phaselock

15.
arXiv (CS.CL) 2026-06-16

Retrievable Gradients: Continual Post-Training Without Cumulative Weight Drift

Continual post-training enables models to absorb emerging knowledge after deployment, but repeatedly updating shared parameters can accumulate weight drift, potentially causing catastrophic forgetting and degrading general capabilities. Retrieval-augmented generation avoids such parameter drift, yet often lacks the depth of parametric knowledge integration. In this paper, we propose ReGrad (Retrievable Gradients), a new paradigm that treats gradients as retrievable units of knowledge. ReGrad pre-computes document-specific gradients offline, stores them in an indexed Gradient Bank, and retrieves only query-relevant gradients at inference time for temporary weight adaptation. However, raw language-modeling gradients are optimized for token-level document reconstruction rather than for query-driven knowledge use. We therefore introduce a bi-level meta-learning objective that reshapes document-derived gradients into generalizable adaptation signals for downstream tasks. Experiments across general and domain-specific settings show that \textsc{ReGrad} outperforms CPT and RAG baselines, enabling scalable and reversible parametric knowledge injection without accumulating weight drift.

16.
arXiv (CS.LG) 2026-06-11

Range-Aware Bayesian Optimization for Discovering Diverse Designs within Target Property Windows

arXiv:2606.11574v1 Announce Type: new Abstract: In many materials and product design problems, desirable candidates exhibit properties that fall within an acceptable range rather than achieve a single optimum. Recovering multiple, distinct solutions that satisfy such specifications is also practically valuable, as some candidates may be preferred for reasons of cost, processability, or robustness that are difficult to encode directly in an objective function. Here, we develop a range-aware Bayesian optimization (BO) framework in which the acquisition function directly scores the posterior probability that a candidate satisfies a target range. The framework naturally extends to parallel pursuit of multiple distinct specifications over a shared candidate space. Across benchmark tasks, range-aware acquisition consistently recovers larger and more diverse sets of valid designs than standard BO baselines and recent goal-seeking methods. Its utility is further demonstrated in two practically motivated design case studies involving optimizing reaction conditions for polymer synthesis and sequence-defined oligomer discovery for prescribed optical absorption bands, supported by quantum chemical calculations. These results suggest that range-aware BO can provide a practical and sample-efficient foundation for specification-driven design, particularly when design flexibility and solution diversity are important considerations.

17.
arXiv (CS.CV) 2026-06-16

Tool-IQA: Augmenting Image Quality Assessment with Simple Tools

Vision-Language Models (VLMs) have been increasingly adopted for Image Quality Assessment (IQA). However, current methods typically employ a static one-shot scoring paradigm, despite the fact that humans assess image quality through dynamic visual inspection, e.g., selectively adjusting views to verify details and subtle artifacts. Specifically, relying solely on a single-pass observation introduces two primary limitations: first, perceiving the image only at a global scale restricts the assessment of finer local details; second, the original intensity distribution of the image may overwhelm the visibility, leading to insufficient inspection of image quality. To address these issues, we propose Tool-IQA, shifting the assessment mechanism from passive scoring to a tool-augmented workflow. In particular, we equip VLMs with simple yet effective view tools: a Magnifier to inspect local details, and a Gamma Corrector to uncover visibility and hidden artifacts. The assessment follows a structured pipeline that consists of an initial observation with rubric notes, a tool-augmented in-depth inspection, and a final quantification for calibrated quality score. Furthermore, to ensure efficient and purposeful tool callings, we introduce a batch-aware training strategy to reward tool interactions that can yield positive contributions rather than simply encouraging usage. Experiments on a variety of IQA benchmarks demonstrate that, with effective tool calling and calibrated assessment, our proposed Tool-IQA significantly outperforms existing state-of-the-art models, e.g., it achieves a PLCC of 0.854 on the challenging CLIVE dataset.

18.
arXiv (CS.CL) 2026-06-15

MedLatentDx: Latent Multi-Agent Communication for Cross-Hospital Rare-Disease Diagnosis

Rare diseases affect over $300$ million patients across more than $7{,}000$ conditions, yet no single hospital encounters enough cases of any one condition for reliable diagnosis. Cross-hospital collaboration could help by allowing a diagnosing institution to use distributed, case-specific diagnostic evidence, but privacy regulations restrict the transmission of identifiable clinical text across institutional boundaries. This setting raises two challenges: existing medical agent systems often rely on textual evidence exchange, while raw latent states such as hidden states and KV caches may still reveal prompt-derived clinical content. We introduce MedLatentDx, a latent multi-agent communication framework in which hospital agents keep private clinical records and retrieved cases local, and send compact latent KV blocks to a host agent for rare-disease diagnosis. MedLatentDx supports two deployment settings: same-backbone hospital agents use latent KV distillation, while hospitals with different LLM backbones use cross-family latent alignment. On CrossRare-Bench, a self-built large-scale rare-disease benchmark with hospital-level partitions, MedLatentDx improves cross-hospital diagnostic performance while reducing reconstructable clinical content relative to raw-latent communication baselines.

19.
arXiv (CS.CL) 2026-06-18

Compact Geometric Representations of Hierarchies

Computing geometric representations of data is a cornerstone of modern machine learning, typically achieved by training dual encoders which map queries and documents into a shared embedding space. Recent work of You et al. [NeurIPS '25] has extended this approach to hierarchical retrieval, where relevance is determined by the ancestor-descendant relationships in a Directed Acyclic Graph (DAG). While previous work has shown that valid embeddings exist when the number of descendants is small, these bounds degrade significantly for deep hierarchies, requiring dimensions as large as the total number of nodes. In this paper, we investigate compact reachability embeddings for more general graph classes and provide theoretical guarantees for representing hierarchies using embeddings whose dimension depends on structural graph parameters. We prove that for any directed tree, there exists a reachability embedding in constant dimension 3, independent of the tree's size or depth. We generalize this result to graphs characterized by treewidth $t$, constructing embeddings of dimension $O(t \log n)$, where $n$ is the number of nodes. Complementing these upper bounds, we provide matching or near-matching lower bounds, showing that dimension $\Omega(n)$ is necessary for general DAGs and $\Omega(t/\log(n/t))$ is required for graphs of treewidth $t$. We also obtain upper and lower bounds parameterized by the number of cross-edges in the DAG. We additionally show that our embeddings can be constructed on real world datasets, and that they give much smaller dimensions in high recall regimes compared to prior embeddings with theoretical guarantees.

20.
medRxiv (Medicine) 2026-06-18

Cost-effectiveness of a virtual fracture clinic versus traditional in-person fracture clinic care for adults with acute simple fractures: a protocol for a health economic evaluation within the RECITAL trial

ABSTRACT Introduction Traditional in-person fracture clinics are often overcrowded and inconvenient for patients. Virtual fracture clinics aim to address some of these concerns by improving the efficiency of the orthopaedic service and reducing unnecessary interventions while maintaining safety and quality of care. The RECITAL trial is a non-inferiority randomised controlled trial comparing follow-up care provided at a virtual fracture clinic for people with acute simple fractures to follow-up care provided at an in-person fracture clinic. This study describes the protocol for an economic evaluation of RECITAL where the primary aim is to investigate the cost-effectiveness of a virtual fracture clinic compared with traditional in-person fracture clinic care from a health system perspective. Methods and analysis The RECITAL trial recruited 312 participants with acute simple fractures and randomised them to receive follow-up care provided at a virtual fracture clinic or follow-up care provided at an in-person fracture clinic. We will conduct a within-trial analysis from a health system perspective (primary analysis), as well as a health service, patient and societal perspective. The economic evaluation will estimate the difference in the cost of resource inputs on an intention to treat basis used by participants in the two arms of the trial, allowing comparisons to be made between the in-person and virtual fracture clinics. Data for intervention costs and healthcare utilisation will be collected from trial records, hospital electronic medical records and district performance units. The results of the economic evaluation will be expressed in terms of incremental cost per utility weight gained at 12 weeks and will be plotted on a cost-effectiveness plane. Bootstrapping by resampling will be used to estimate 95% confidence intervals around costs and outcomes, and to calculate the confidence intervals around the incremental cost-effectiveness ratio. A cost-effectiveness acceptability curve (CEAC) will be plotted, which will provide information about the probability that an intervention is cost-effective, given the level of a decision makers willingness to pay for each additional outcome. Ethics and Dissemination The trail was approved by the SLHD Ethics Review Committee (RPAH Zone) (X23-0200 and 2023/ETH01038). The findings will be disseminated through a peer-reviewed journal and conference presentations. Trial registration number The trial was prospectively registered on the Australian New Zealand Clinical Trials Registry (ANZCTR; 12623000934640)

21.
arXiv (CS.LG) 2026-06-19

Meta Flow Maps enable scalable reward alignment

arXiv:2601.14430v2 Announce Type: replace-cross Abstract: Controlling generative models is computationally expensive. This is because optimal alignment with a reward function–whether via inference-time steering or fine-tuning–requires estimating the value function. This task demands access to the conditional posterior $p_{1|t}(x_1|x_t)$, the distribution of clean data $x_1$ consistent with an intermediate state $x_t$, a requirement that typically compels methods to resort to costly trajectory simulations. To address this bottleneck, we introduce Meta Flow Maps (MFMs), a framework extending consistency models and flow maps into the stochastic regime. MFMs are trained to perform stochastic one-step posterior sampling, generating arbitrarily many i.i.d. draws of clean data $x_1$ from any intermediate state. Crucially, these samples provide a differentiable reparametrization that unlocks efficient value function estimation. We leverage this capability to solve bottlenecks in both paradigms: enabling inference-time steering without inner rollouts, and facilitating unbiased, off-policy fine-tuning to general rewards. Empirically, our single-particle steered-MFM sampler outperforms a Best-of-1000 baseline on ImageNet across multiple rewards at a fraction of the compute.

22.
arXiv (CS.CL) 2026-06-17

NarrativeWorldBench: A Frontier-Saturated Benchmark and a Latent World Model for Long-Horizon Co-Creative Audio Drama

Long-form serialized audio drama, with arcs that run for 200 to 800 episodes, is a major creative medium and a setting where frontier large language models (LLMs) fail. We benchmark 21 models, spanning classical, fine-tuned, open-frontier, closed-frontier, and reasoning tiers, on a uniform set of structural narrative metrics. All closed-frontier systems saturate at a plot-beat F1 in the band [0.78, 0.81] and collapse by about -0.20 F1 at horizon h=200. We introduce NarrativeWorldBench, an open benchmark of nine narrative-structure metrics evaluated across horizons h in {10, 20, 50, 100, 200}, with cross-lingual evaluation across four Indic languages (Hindi, Tamil, Telugu, Marathi). We introduce N-VSSM, a Narrative Variational State-Space Model that maintains a structured 256-dimensional latent world state over more than 200 episodes via a Mamba-2 backbone with an event-conditioned posterior and an 8B decoder. N-VSSM holds plot-beat F1 >= 0.84 across all horizons at 4x lower compute than the closed-frontier band. A learned Cultural Transfer Function lifts cross-language fidelity by +0.20 to +0.23 Likert points. In a within-subjects writer study (n = 12 professional authors, 240 trials), N-VSSM is preferred over Claude Opus 4.5 on long-arc consistency 71% of the time and rated +1.3 Likert points higher on controllability.

23.
arXiv (CS.CL) 2026-06-11

ClawEnvKit: Automatic Environment Generation for Claw-Like Agents

Constructing environments for training and evaluating claw-like agents remains a manual, human-intensive process that does not scale. We argue that what is needed is not just a dataset, but an automated pipeline capable of generating diverse, verified environments on demand. To this end, we introduce ClawEnvKit, an autonomous generation pipeline that instantiates this formalism from natural language descriptions. The pipeline comprises three modules: (1) a parser that extracts structured generation parameters from natural language input; (2) a generator that produces the task specification, tool interface, and scoring configuration; and (3) a validator that enforces feasibility, diversity, structural validity, and internal consistency across the generated environments. Using ClawEnvKit, we construct Auto-ClawEval, the first large-scale benchmark for claw-like agents, comprising 1,040 environments across 24 categories. Empirically, Auto-ClawEval matches or exceeds human-curated environments on coherence and clarity at 13,800x lower cost. Evaluated across 4 model families and 8 agent harness frameworks, we find that harness engineering boosts performance by up to 15.7 percentage points over a bare ReAct baseline, completion remains the primary axis of variation with no model saturating the benchmark, and automated generation enables evaluation at a scale previously infeasible. Beyond static benchmarking, ClawEnvKit enables live evaluation: users describe a desired capability in natural language and obtain a verified environment on demand, turning evaluation into a continuous, user-driven process. The same mechanism serves as an on-demand training environment generator, producing task distributions that adapt to an agent's current weaknesses rather than being bounded by existing user logs.

24.
arXiv (CS.CL) 2026-06-11

Mapping Scientific Literature with Large Language Models and Topic Modeling

Scientific literature is increasingly fragmented by disciplinary boundaries, specialized terminology, and potentially sparse keyword systems, making it difficult to capture the evolving structure of modern science. This study introduces a large language model (LLM)-driven framework for mapping scientific literature from a topic modeling perspective. The approach is demonstrated on a 20-year corpus of more than 1,500 engineering-related articles published in the Proceedings of the National Academy of Sciences (PNAS). A two-stage classification pipeline first assigns a primary thematic category to each article based on its abstract, followed by full-text analysis to identify secondary classifications that reveal latent cross-topic connections within the corpus. Unlike conventional topic models, the LLM-based framework produces semantically interpretable topics while maintaining strong quantitative performance. Comparative evaluation against established topic modeling methods shows higher topic diversity and lower overlap with competitive coherence metrics. Manual validation on a randomly sampled subset of abstracts yields an accuracy of 75.9%. Additional traditional natural language processing analyses confirm that the generated topics correspond to meaningful linguistic patterns in the corpus. A bipartite network linking primary and secondary classifications further reveals implicit thematic relationships that are not readily observable through abstracts or keyword systems alone. The findings indicate that the framework independently recovers much of the journal's editorial dual-classification structure without prior knowledge of its schema. Overall, the proposed approach offers a powerful tool for mapping science and identifying emerging cross-topic connections in research.

25.
arXiv (CS.CL) 2026-06-11

UR-BERT: Scaling Text Encoders for Massively Multilingual TTS Through Universal Romanization and Speech Token Prediction

We propose UR-BERT, a Romanized transcription-based text-to-speech (TTS) encoder for massively multilingual TTS systems. Conventional grapheme-to-phoneme (G2P)-based approaches are limited to around 100 languages due to the availability of reliable G2P resources. In contrast, UR-BERT scales to 495 languages by unifying diverse writing systems into a shared Romanization representation. To further enhance phonetic fidelity and text-speech alignment, we introduce a speech token prediction objective during training, which encourages the encoder to learn speech-aware phonetic representations in a data-efficient manner. Experiments show that TTS systems built on UR-BERT consistently outperform recent text encoder baselines across a wide range of languages and resource conditions, and demonstrate strong generalization to unseen languages.