Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.CL) 2026-06-11

To Intervene or Not: Guiding Inference-time Alignment with Probabilistic Model Blending

The wide deployment of LLMs has made model alignment necessary to make newly trained models safely and effectively respond to user instructions. Among different methods, inference-time alignment is often cheaper as it intervenes (i.e., offers guidances) only during output generation. Existing proposals apply guidances extracted from certain aligned models without properly assessing their reliability. Nonetheless, our systematic evaluation reveals that guidance effectiveness varies drastically across models; since ineffective guidances lead to further confusion and thus further interventions, the resulting excessive interventions typically indicate poor performance. To make interventions more effective and thus more efficient, we introduce BlendIn, an inference-time alignment framework that shifts from binary decisions to creating hybrid distributions integrating both models' knowledge. BlendIn stabilizes inference-time alignment by performing quality-aware alignment and proportionally weighting each model's contribution based on reliability. Compared with existing works, it preserves beneficial guidance while downweighting unreliable suggestions. BlendIn provides both diagnostic signals and mitigation strategies for misaligned guidance, achieving consistent and up to 50% performance improvement on challenging model pairs. Our code is available at: https://github.com/DecayingSeart/BlendIn.

02.
arXiv (quant-ph) 2026-06-17

Coherent Control of an Embedded Bound State Without a Spectral Gap

Authors:

arXiv:2606.17685v1 Announce Type: new Abstract: Bound states in the continuum (BICs) can confine photonic excitations in open systems without conventional cavities or band gaps, making them natural candidates for long-lived quantum storage and single-photon control. Their use is limited, however, by two obstacles: they are dark to incident photons, and they lack spectral-gap protection from the surrounding continuum. We overcome both limitations in a giant atom coupled to a one-dimensional waveguide using two temporal control knobs. Atomic-frequency modulation breaks and restores the destructive-interference condition, enabling deterministic capture and release of mode-matched single photons. Coupling modulation instead preserves the BIC condition while tuning the atomic and photonic weights of the stored state. A key result is that this embedded state can nevertheless be controlled adiabatically despite the absence of a spectral gap, with an intrinsic leakage probability linear in the ramp rate. By separating radiative access from BIC-preserving deformation, the protocol turns a dark BIC into a single-photon memory whose fidelity is set by the intrinsic continuum-induced leakage law, providing a route to embedded-state control in open photonic platforms.

03.
arXiv (CS.AI) 2026-06-15

Mood-Aware Music Recommendation: Integrating User Affective Signals into Ranking Systems

arXiv:2606.13858v1 Announce Type: cross Abstract: Recommendation systems are essential in modern music streaming platforms due to the vast amount of available content. While collaborative filtering is widely used to suggest items based on the preferences of others with similar patterns, it performs poorly in domains where user-item interactions are sparse, such as music. Content-based filtering is an alternative approach that examines the qualities of the items themselves. Genre, instrumentation, and lyrics have been explored; however, relatively little attention has been given to emotion recognition. Since a user's emotional state strongly influences their music choice, incorporating mood signals offers a promising direction for personalization. In this work, we propose a mood-conditioned ranking framework that integrates user affective signals into the recommendation process via softmax-based sampling in the energy-valence space. We evaluate the approach via single-blind experiments in which participants compare recommendations from the proposed system against a baseline. The results indicate improved perceived recommendation quality, providing preliminary evidence for the effectiveness of incorporating mood-based inputs into music recommendations.

04.
arXiv (math.PR) 2026-06-16

A small noise approximation for Muller's Ratchet

arXiv:2606.15842v1 Announce Type: new Abstract: We consider an infinite system of SDEs with Fleming-Viot noise indexed by $k=0,1,2,\dots$, whose parameters $\alpha,\lambda$, and $\nu$ are the (deleterious) selection coefficient, the (uni-directional) mutation rate, and a quantity which determines the size of the system's fluctuations. The SDE's unique weak solution $X(t) = (X_k(t))_{k=0,1,2,...}$ models what is known in population genetics as Muller's ratchet. Here, $X_k(t)$ stands for the frequency of individuals carrying $k$ deleterious mutations. Since the mutation process is uni-directional, $t\mapsto \inf\{k: X_k(t)> 0\}$ is non-decreasing for almost every path of $X$, and we refer to an increase as a click of Muller's ratchet. A long standing question concerns the clicking rate of Muller's ratchet. Using Duhamel's principle for semigroups, we give a partial answer by approximating $E(\sum_{k=1}^\infty kX_k(t) )$ and $E\big(X_0(t)\big)$ up to $O(1/\nu^2)$ for fixed $\alpha$, $\lambda$ and $t>0$. Our results suggest that $\psi:=\nu \alpha e^{-\lambda/\alpha}$ is a crucial quantity also when the mutation/selection ratio $\theta = \lambda/\alpha$ is moderately large: for large $\nu \alpha$, clicking of the ratchet on the time scale $\frac 1\alpha \log \theta$ becomes rare as soon as $\psi$ becomes large.

05.
arXiv (CS.AI) 2026-06-12

WOMBET: World Model-Based Experience Transfer for Robust and Sample-efficient Reinforcement Learning

arXiv:2604.08958v3 Announce Type: replace-cross Abstract: Reinforcement learning (RL) in robotics is often limited by the cost and risk of data collection, motivating experience transfer from a source task to a target task. Offline-to-online RL leverages prior data but typically assumes a given fixed dataset and does not address how to generate reliable data for transfer. We propose World Model-Based Experience Transfer (WOMBET), a framework that jointly generates and utilizes prior data. WOMBET learns a world model in the source task and generates offline data via uncertainty-penalized planning, followed by filtering trajectories with high return and low epistemic uncertainty. It then performs online fine-tuning in the target task using adaptive sampling between offline and online data, enabling a stable transition from prior-driven initialization to task-specific adaptation. We show that the uncertainty-penalized objective provides a lower bound on the true return and derive a finite-sample error decomposition capturing distribution mismatch and approximation error. Empirically, WOMBET improves sample efficiency and final performance over strong baselines on continuous control benchmarks, demonstrating the benefit of jointly optimizing data generation and transfer.

06.
arXiv (CS.CV) 2026-06-18

Spatially Stratified Distillation for Heterogeneous Radar Place Recognition

Scalable, all-weather place recognition increasingly relies on heterogeneous radar place recognition to bridge diverse hardware platforms. A notable application is matching queries from cost-effective 4D automotive radars against high-fidelity reference maps built by dense spinning radars. This process is fundamentally limited by the extreme sparsity (and narrow field-of-view) of the 4D sensor, which captures only a fraction of the structural density present in the spinning radar database. Prior efforts address this issue by unifying different radar signals. That is, projecting both signals into a common representational space. Yet, they suffer performance degradation in multi-session environments. In this paper, we propose spatially-stratified distillation (SSD); a strategy that replaces standard uniform distillation with an asymmetric spatial alignment derived directly from physical radar returns. In regions where both radars exhibit overlapping returns, SSD enforces strong feature alignment. Crucially, in sparse regions where the 4D student lacks returns but the teacher contains valid structure within the shared field of view, SSD applies heavily discounted distillation weights. Extensive evaluations of the recent HeRCULES dataset demonstrate that SSD significantly outperforms prior place recognition methods, achieving state-of-the-art results on its challenging dynamic sequences.

07.
arXiv (CS.CV) 2026-06-18

SP-TransientBench: A Real-Captured Single Photon Perception Benchmark

Single-photon LiDAR (SPL) based on single-photon avalanche diode (SPAD) sensing enables time-resolved photon measurements with extreme sensitivity, offering unique potential for active 3D perception in photon-starved scenarios.However, real-world single photon perception remains fundamentally challenging due to unique measurement noise and complex multi-return transient phenomena, which jointly complicate geometric reconstruction and semantic scene understanding. Despite growing interest in SPAD-based sensing, existing studies are largely limited to simulated data or small-scale controlled captures. As a result, systematic evaluation of real-world single photon perception across depth estimation, multi-view reconstruction, and 3D semantic understanding remains underexplored. To bridge this gap, we introduce SP-TransientBench (STB), a real-captured multi-task benchmark for single photon perception. SP-TransientBenc comprises 10 diverse scenes and 10,297 views captured using a solid-state single-photon LiDAR at $256\times192$ resolution. Each view provides full time-of-flight histograms with multi-return behavior,standardized metadata, and calibrated camera poses for multi-view evaluation. We further provide 13-class 3D semantic annotations for selected scenes. By providing dedicated data splits and evaluation protocols for each task, STB enables consistent and reproducible benchmarking of real-world single photon perception across multiple 3D vision problems. The dataset and code will be released upon acceptance.

08.
arXiv (CS.AI) 2026-06-16

PH-KAN: Port-Hamiltonian Kolmogorov-Arnold Network

arXiv:2606.14708v1 Announce Type: cross Abstract: Data-driven machine learning approaches have become increasingly attractive for nonlinear system identification, but standard models often fail to preserve the underlying physical structure and remain difficult to interpret, especially when no analytical model is available. In this context, port-Hamiltonian (pH) models provide a natural physics-informed representation. However, when these models are parameterized with standard multilayer perceptrons (MLPs), the learned constitutive components often remain poorly interpretable. In this paper, we propose a structure-preserving identification framework for nonlinear port-Hamiltonian systems based on Kolmogorov-Arnold Networks (KANs). The proposed PH-KAN model parameterizes the interconnection matrix, dissipation matrix, Hamiltonian, and input mapping using dedicated KAN blocks, while enforcing the port-Hamiltonian constraints by construction. This yields constitutive representations in which the nonlinear functions defining the identified pH components can be explicitly inspected, leading to a more interpretable model than with standard MLP-based parameterizations.

09.
arXiv (CS.CL) 2026-06-15

When Plausible Is Not Realistic: Evaluating Human Mobility in LLM-Based Urban Simulation

LLM-based generative agents are increasingly used in urban simulators, yet it remains unclear whether they reproduce empirically realistic human mobility patterns or merely generate plausible mobility narratives. We introduce a validation framework for evaluating the mobility of generative agents of LLM-based urban simulators against real-world mobility data. For this, we use mobility laws, temporal rhythms, network motifs, semantic activity transitions, and behavioral mobility profiles. Using datasets from the Greater Paris region and Shanghai, we evaluate AgentSociety and CitySim across multiple dimensions of mobility realism. Our analysis reveals a substantial gap between narrative plausibility and empirical mobility realism. Although the simulators capture some high-level semantic activity distributions, they struggle to reproduce core spatial and temporal constraints, including realistic trip-length distributions, origin-destination flows, dwell times, and transition dynamics. We further observe that realistic mobility diversity is unstable across default prompting configurations and may require explicit profile-aware initialization. To support reproducible evaluation, we also contribute scalable and open LLM-driven infrastructure for regional-scale map generation, observability-enhanced simulation, mobility-metric computation, and traffic simulation. Our findings highlight the need for rigorous empirical validation of LLM-based urban simulators and provide practical tools for building more realistic and reproducible urban simulation systems.

10.
arXiv (CS.LG) 2026-06-18

Concept Modulation Models: A Unified Framework for Identifiability and Extrapolation

arXiv:2606.18509v1 Announce Type: new Abstract: Reliable generalization in conditional latent variable models requires understanding both identifiability and extrapolation: how observed variation across attributes determines latent structure, and how that structure determines distributions at unseen attributes. However, existing identifiability and extrapolation guarantees are largely model-specific, with separate analyses in nonlinear ICA, causal representation learning, perturbation modeling, and related conditional latent variable models. We introduce concept modulation models (CMMs), an attribute-indexed class of conditional generative models with structure $A\to \Lambda \to C\to X$, where attributes select modulators, modulators induce latent concept laws, and concepts generate observed features. CMMs lift transition-based identifiability to conditional settings by showing that feature agreement on observed attributes induces a latent concept transition constrained by the CMM class. We express these constraints through attribute potentials, log-density ratios between attribute-conditioned concept laws, separating the generic lifting step from model-specific rigidity arguments. The same potentials control extrapolation: agreement at unseen attributes holds exactly when the transported attribute-potential identities extend to those attributes. This yields algebraic extrapolation criteria, identifies the common potential-based proof objects behind several existing identifiability and extrapolation results, and, when combined with the model-specific rigidity arguments in those works, recovers their stated conclusions.

11.
bioRxiv (Bioinfo) 2026-06-08

DipSkmer: Reference-free population genomics with diploid genome skims

Ecologists and conservation biologists rely on genetic diversity as a key essential biodiversity variable (EBV) used to track population health and dynamics, and utilize the population parameter {theta} (estimated by the average pairwise genomic distance) as a key metric of diversity. While whole-genome-sequencing (wgs) is increasingly affordable, it will be considerable time before the full diversity of life is represented by high-quality assembled genomes; even then, constant monitoring will still require repeated sampling of populations. In contrast, genome skimming (low-coverage, short-read wgs) is highly cost-effective but challenging to analyze because the coverage is too low for assembly and reliable error correction. Mature methods, such as Mash, exist for estimating pairwise genomic distances based on the Jaccard similarity of k-mer sets computed using sketching techniques. Some, such as Skmer, additionally model the impacts of low coverage. These methods have been successfully applied to assembly-free species identification and phylogenetics; however, their use in population genetics has been limited. This is because these methods implicitly treat genomes as haploid and heterozygosity confounds true estimates of genomic distance for diploid organisms. In this paper, we address this problem through a number of technical advances. First, we use coalescent theory to mathematically derive how the Jaccard index between two diploid samples changes with the scaled population size parameter ({theta}). Next, we derive an estimator that computes {theta} from the Jaccard index, in addition to several auxiliary variables, which we also estimate from the genome skims. The resulting method, DipSkmer, enables more accurate estimates of coverage, sequencing error, and pairwise nucleotide distance for diploid samples. Analyses of both simulated and empirical datasets show that for diploids and low distances (e.g.,

12.
arXiv (CS.AI) 2026-06-15

YeasierAgent: Agentic Social Sandbox as a Canvas for Intent-Driven Creation of Platform-Agnostic Symbiotic Agent-Native Applications

Authors:

arXiv:2606.13722v1 Announce Type: new Abstract: This paper introduces YeasierAgent, an application-building paradigm based on symbiotic agents, narrative worlds, and scene-aware interaction. It challenges the conventional device-coupled model of software by redefining applications as collaborative spaces among users, agents, and worlds. We present a system architecture that achieves two primary contributions: (1) enabling the rapid, cross-platform construction of agent-native applications by utilizing platform-agnostic interactive units (agents, scenes, dialogue) rather than fixed graphical layouts; and (2) unifying the emotional companionship and practical tool execution attributes of intelligent agents within a single experiential sandbox. By integrating automated generation, user-created worlds, and spatial multi-agent collaboration, YeasierAgent formalizes the category of Symbiotic Agent-Native Applications, demonstrating a shift from isolated, tool-specific chatbots toward cohesive, socially embedded computational environments.

13.
medRxiv (Medicine) 2026-06-16

Development of an automated, imaging-based preoperative screening model for early identification of malnutrition in an abdominal surgery cohort

Background: Clinical malnutrition affects one in five abdominal surgery patients and increases postoperative complications and mortality. Current screening occurs after admission, closing the window for preoperative nutritional intervention. No objective, scalable preoperative screening tool exists. Objective: To determine whether automated volumetric CT-based body composition analysis improves preoperative identification of surgical patients at risk for clinical malnutrition compared to clinical variables or single slice imaging alone. Methods: Retrospective cohort study of adults undergoing elective abdominal surgery at a quaternary academic medical center (2018 to 2021) with a preoperative CT scan within 90 days and complete nutrition assessment. Clinical malnutrition was diagnosed by a registered dietitian using ASPEN/AND criteria. Three sex stratified Elastic Net models were compared: (1) base clinical variables; (2) base plus L3 single slice skeletal muscle index and attenuation; and (3) base plus comprehensive 3D volumetric quantification of five muscle groups and two fat depots. Discrimination (AUROC), calibration (Brier score), and clinical utility (decision curve analysis) were assessed via 10-fold cross-validation. Results: Among 1,143 patients (52.4% female; mean age 60.5 years), 231 (20.2%) were diagnosed with malnutrition. Malnourished patients had significantly higher complication rates (36.4% vs. 15.4%, p

14.
arXiv (CS.CV) 2026-06-17

Do We Really Need Diffusion? A Fast U-Net for Paired Medical Image Translation

Magnetic resonance imaging-signal fat fraction (MRI-SFF) quantifies tissue fat and serves as an established biomarker for metabolic and musculoskeletal disorders. The acquisition requires, however, specialized MRI sequences, which are not available routinely. We investigate whether SFF can be estimated from widely available T2-weighted (T2w) MRI via image-to-image translation (I2I). We further compare a lightweight 4-level U-Net to a state-of-the-art Denoising Diffusion Probabilistic Model (DDPM) using a dataset of 230 048 paired 2D images (183 517 train, 23 621 val, 22 910 test) from the German National Cohort (NAKO). Both models clearly outperform the identity baseline (Pearson correlation r = 0.769, mean absolute error MAE = 0.070 +/- 0.054), which confirms that the models learn a non-trivial cross-modal mapping. Interestingly, the lightweight U-Net outperforms the DDPM in both correlation (r = 0.975 vs. 0.962) and error (MAE = 0.014 +/- 0.015 vs. 0.019 +/- 0.019), while reducing inference time by a factor of 208 (25.2 ms vs. 5 227.2 ms per image using 50 Denoising Diffusion Implicit Model (DDIM) steps). The strong clinical performance at substantially reduced computational cost enables real-time clinical use.

15.
arXiv (CS.CV) 2026-06-16

Metis: A Generalizable and Efficient World-Action Model for Autonomous Driving and Urban Navigation

World action models~(WAMs) have shown great promise for autonomous driving and urban navigation. Built upon Vision-Language-Action models or video generation models, existing approaches suffer key limitations: (1) High inference latency due to future observation prediction at test time, and (2) tightly coupled video and action modeling leading to representational mismatch and degraded generalization. To address both issues, we propose Metis, an end-to-end WAM framework that decouples video generation and action prediction. Specifically, Metis employs a Mixture-of-Transformers architecture with dedicated experts for video generation and action prediction, preserving the intrinsic distributional properties of each task. To enhance efficiency, we introduce an asymmetric attention mask that enables joint training of both experts while allowing the action model to bypass explicit video generation during inference. This design ensures training-inference consistency and significantly reduces computational costs without compromising planning performance. Extensive experiments demonstrate state-of-the-art performance on the NAVSIM navhard and navtest benchmarks and the CityWalker navigation benchmark, validating both the generalizability and efficiency across diverse tasks. Real-robot deployments further confirm the practical feasibility of our approach.

16.
arXiv (CS.CV) 2026-06-15

Representation Forcing for Bottleneck-Free Unified Multimodal Models

Unified multimodal models (UMMs) aim to handle perception and generation in a single model. Yet existing UMMs still rely on a frozen, separately pretrained VAE for image generation, imposing a structural bottleneck. Naively removing it introduces a quality gap, as the model must learn both high-level structure and low-level details from raw pixels. In this paper, we propose Representation Forcing (RF), a technique that closes this gap by making representation prediction a native capability of the model. Concretely, RF forces the decoder to autoregressively predict visual representations as intermediate tokens before pixels; these tokens then stay in context to guide pixel diffusion within the same backbone. By turning representations from perception outputs into generation targets, RF eliminates the need for any external generative latent space. We find that RF benefits both understanding and generation. On image generation, our pixel-space model with RF matches state-of-the-art VAE-based unified models. On image understanding, pixel-space RF generally outperforms its VAE-based variant. Together, these results offer an effective step toward end-to-end, bottleneck-free UMMs.

17.
arXiv (quant-ph) 2026-06-16

Optimizing resource bounds in direct fidelity estimation

arXiv:2606.16336v1 Announce Type: new Abstract: Direct fidelity estimation provides a way to estimate the fidelity between an experimentally prepared state and a desired pure target state without performing full tomography. Two influential formulations were introduced in 2011 by Flammia and Liu and by da Silva, Landon-Cardinal, and Poulin. In these protocols, the total estimation error is controlled through two distinct probabilistic steps: first, the fidelity is approximated using randomly sampled Pauli observables; second, each sampled expectation value is estimated from finitely many measurement outcomes. In this work we show that additional structural information about the noise can substantially sharpen the corresponding resource bounds. In particular, for some canonical channels the effective number of sampled Pauli settings can be reduced, leading to lower measurement cost both in the general pure-state setting and in the case of a stabilizer state. These results illustrate a broader point: worst-case confidence bounds in direct fidelity estimation can be significantly conservative when experimentally relevant structure is ignored. As a technical ingredient, we also revisit the allocation of the total accuracy and confidence budgets between the two probabilistic steps. Reformulating the analysis in terms of separate error parameters yields a constrained optimization problem whose solution lowers the average number of measurements in the general pure-state setting. Numerical simulations based on quantum circuits implemented in Qiskit illustrate both the improvement obtained under structured-noise assumptions and the conservativeness of the original worst-case bounds.

18.
arXiv (CS.LG) 2026-06-18

Clustering and Pruning in Causal Data Fusion

arXiv:2505.15215v3 Announce Type: replace-cross Abstract: Data fusion, the process of combining observational and experimental data, can enable the identification of causal effects that would otherwise remain non-identifiable. Although identification algorithms have been developed for specific scenarios, do-calculus remains the only general-purpose tool for causal data fusion, particularly when variables are present in some data sources but not others. However, approaches based on do-calculus may encounter computational challenges as the number of variables increases and the causal graph grows in complexity. Consequently, there exists a need to reduce the size of such models while preserving the essential features. For this purpose, we propose pruning (removing unnecessary variables) and clustering (combining variables) as preprocessing operations for causal data fusion. We generalize earlier results on a single data source and derive conditions for applying pruning and clustering in the case of multiple data sources. We give sufficient conditions for inferring the identifiability or non-identifiability of a causal effect in a larger graph based on a smaller graph and show how to obtain the corresponding identifying functional for identifiable causal effects. Examples from epidemiology and social science demonstrate the use of the results.

19.
arXiv (CS.LG) 2026-06-12

Learning with Simulators: No Regret in a Computationally Bounded World

arXiv:2606.13576v1 Announce Type: new Abstract: Understanding the minimal assumptions necessary for generalization is the fundamental question in learning theory. Unfortunately, most results rely heavily on independence (or some proxy thereof) of the data-generating process, while results for strongly dependent data are far more limited. Towards addressing this gap, we introduce the framework of simulatable processes, where the learner has access to a simulator that approximates the distribution generating the data (which may be an arbitrarily complex and dependent process). Surprisingly, given access to such a simulator, we show that we can recover the same learning guarantees as in the classical setting with independent data, namely, error bounds that depend on the VC dimension. Further, we use this framework to study the power of conditional sampling and show strict statistical and computational advantages in this setting. As a highlight of our framework, we exhibit a single algorithm that simultaneously learns any given VC class under all processes samplable in bounded polynomial time, with regret controlled by the time-bounded Kolmogorov complexity of the process. This provides a significant conceptual broadening of the classical PAC model.

20.
arXiv (CS.LG) 2026-06-18

The Chandra-Gaia Catalog of Counterparts: Resolving ambiguous Gaia matches to X-ray sources in the Chandra Source Catalog using Machine Learning

arXiv:2606.19329v1 Announce Type: cross Abstract: We present a framework to cross-match sources from the Chandra Source Catalog (CSC v2.1) with optical sources from Gaia Data Release 3. Unlike purely spatial approaches, we use source properties such as magnitudes, colors, and distances to identify true counterparts, detect chance coincidences, and resolve ambiguities when multiple plausible candidates exist. We define a training set of high-confidence matches using NWAY, a Bayesian cross-matching framework that accounts for positional errors and source densities. We train a gradient-boosted classifier (LightGBM) on a variety of features from both catalogs. Of the ~$254$k unique X-ray sources, we find counterparts for ~$113$k sources, of which plausible multiple counterparts are found for ~$7$k. We find no counterparts for ~$20$k sources for which separation-based cross-matching does find a match, and attribute half of these to chance coincidences. We validate the pipeline on the Chandra Orion Ultradeep Project (COUP), where the machine-learning matches reproduce 95% of NWAY cross-matches without using any positional information. We release a catalog of the ~$113$k Chandra-Gaia counterparts, together with ~$7$k alternative matches and ~$20$k ambiguous NWAY associations, supporting future population studies of sources detectable by both Chandra and Gaia. We discuss limitations and provide a generalization of the framework that is applicable in other cross-matching scenarios.

21.
arXiv (CS.LG) 2026-06-16

Distilling latent electrostatics from foundation machine learning interatomic potentials

arXiv:2606.15001v1 Announce Type: cross Abstract: Foundation machine learning interatomic potentials (MLIPs) have enabled atomistic simulations across broad regions of chemical and materials space, but many remain computationally expensive and lack explicit electrostatics, limiting their use for systems governed by long-range interactions and electrical response. Previously, we introduced Latent Ewald Summation (LES), which learns latent atomic charges and long-range electrostatics from density functional theory (DFT) energy and force labels alone. Here, we use LES to extract electrostatics that are latent in foundation models: energies and forces predicted by a teacher model are used to train a lightweight LES-augmented student MLIP, with optional fine-tuning on additional DFT data. The resulting models reduce computational cost while providing access to Born effective charge tensors, and infrared spectra. We benchmark student models distilled from a broad set of foundation MLIPs, including UMA, MACE, Orb, eSEN, GemNet-OC, PET, and EquiformerV2-based models, against experimental infrared spectra for liquid water, concentrated hydrochloric acid, and the anatase TiO2(101)-water interface. Across these systems, electrostatic response can be extracted from most foundation MLIPs. The benchmark further shows that the underlying DFT level and dataset used to train the teacher model play a larger role than architecture in determining electrostatic and spectroscopic accuracy. For the TiO2-water interface, fine-tuning with a modest amount of higher-level DFT data improves structural and infrared predictions. LES-based distillation therefore provides a practical route for converting foundation MLIPs into efficient, electrically responsive models, while also testing the physical fidelity encoded in foundation models.

22.
arXiv (CS.AI) 2026-06-17

FacProcessTwin: An LLM-Based System for Process Twin Development

arXiv:2606.17666v1 Announce Type: cross Abstract: Process twins provide real-time representations of entire production processes. By capturing how process steps interact, rather than monitoring a single machine in isolation as an asset-based digital twin does, they have the potential to drive efficiency gains across the whole process. However, developing a process twin is costly. It requires accurately modelling the entire production process: its process steps, the equipment and product-specific settings each step uses, and its process variations. The resulting model must then be bound to live operational data. We present FacProcessTwin, a system that leverages a large language model (LLM) to reduce this development time, building a process twin from a plant's process documentation and natural-language input from an operator. FacProcessTwin generates this complete process model and then automatically binds its process steps to live operational data. The generated model and its data bindings are rendered as an interactive process diagram through which manufacturing personnel can monitor and correct the system's autonomous decisions, such as resolving uncertainty at safety-critical binding steps. We evaluate FacProcessTwin through a real-world case study of an Australian food manufacturer, covering 16 production process flows that span chilled, frozen, and aseptic shelf-stable product categories and include process variations within the same product. The results show that FacProcessTwin generates these process models accurately (a mean F1 of 95.2% against ground truth) and builds each twin in roughly a sixth of the manual time. Its human-in-the-loop governance then keeps the safety-critical bindings correct: at ambiguous tags where a single-pass baseline silently mis-binds 75.0% of the time, FacProcessTwin defers to the operator and mis-binds none.

23.
arXiv (CS.AI) 2026-06-11

LSTM-Based Detection of Structural Breaks in Property Insurance Loss Reserving: A Climate-Informed Approach

arXiv:2606.11463v1 Announce Type: cross Abstract: Accurate loss reserving is foundational to insurer solvency, yet accelerating climate driven catastrophes systematically violate the stability assumptions on which traditional actuarial methods depend. This white paper presents a research program testing whether Long Short Term Memory (LSTM) neural networks can detect and adapt to these structural breaks faster and more accurately than Chain Ladder, Bornhuetter Ferguson, and Cape Cod methods. Using 15 plus years of regulatory development triangle data from Florida and Louisiana, enriched with NOAA hurricane intensity indices and sea surface temperatures, we hypothesize a targeted improvement of 15, 20% in reserve accuracy for catastrophe exposed years, a threshold grounded both in the prior neural network reserving literature and in the formal convergence results developed here. Beyond empirical validation, we develop a theoretical framework grounding LSTM structural break detection in probabilistic terms, providing formal performance guarantees that compensate for the limited number of catastrophe events in the test period. We document the research design, methodology, expected contributions, and a candid assessment of limitations.

24.
arXiv (CS.AI) 2026-06-19

Computational Identifiability

arXiv:2606.19361v1 Announce Type: cross Abstract: Identification conditions describe the computability of a target query or parameter of interest as a function of the type and amount of information available. In causal identification, this information is often expressed in the form of a causal graph, and data are observed or collected for some subset of variables in the graph. Target queries may be for a single effect alone or for a class of effects in a given model. The derivation of an identification algorithm then defines mathematically the process by which the desired causal effect(s) can be uniquely determined, theoretically, in expectation. Identifiability in expectation, or 'theoretical identifiability,' generally assumes asymptotic properties, infinite data, or other mathematically idealized conditions. In this paper, we explore a fundamental distinction between this theoretical, idealized notion of identifiability and a proposed alternative that is computation-bound. The framework we propose - 'computational identifiability' - is to instead define a finite computational search procedure for an empirical estimator. If this process finds an estimator empirically, within a desired error tolerance, then identifiability is satisfied, conditional on the specified assumptions of the search (i.e., a prior distribution over the parameters) and conditional on the search procedure itself. Through several experiments, we demonstrate how this framework allows us to answer fine-grained, practical identification questions, such as identification with small finite samples, with ambiguous graphical criteria, with mixed observational-interventional data, and across counterfactual data and estimands. Code is available at https://github.com/lbynum/metadentify.

25.
arXiv (CS.LG) 2026-06-16

Dynestyx: A Probabilistic Programming Library for Dynamical Systems

arXiv:2606.16985v1 Announce Type: cross Abstract: State-space models (SSMs) are the standard formalism for Bayesian treatment of dynamical systems, with natural applications in statistics, signal processing, and machine learning. Despite their importance in both theory and application, dynamical systems have proven difficult to incorporate in modern probabilistic programming languages (PPLs), making state-of-the-art methods less accessible to practitioners and introducing friction in following the "Bayesian workflow." We introduce dynestyx, a probabilistic programming library with first-class support for SSMs, including state-of-the-art methods in the estimation of both states and parameters. Through a single, unified interface, users may specify arbitrary priors for discrete-time or continuous-time dynamical systems, perform inference over mixed-effect data, and make state and parameter estimates with principled uncertainty quantification.