Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.CL) 2026-06-16

Re-feeding Is Not Replaying: Measuring Replay Noise in Counterfactual Token-Credit Estimation

Authors:

Per-token counterfactual credit estimation asks which token in a language-model rollout caused the final answer to be right or wrong: cut the transcript at a pivot, substitute an alternative token, replay continuations, and compare outcomes. Published methods re-feed the transcript prefix as a fresh prompt, assuming this reproduces the state the model passed through during generation. We measure what that assumption costs on a stock inference engine, with a three-pass design: continuations resumed from the verified decode-time KV state, an identical second exact pass (a replica noise floor), and a re-feed pass. Across six configurations and three models (including a GRPO-trained checkpoint), at low-margin decision tokens, re-feeding changes the credit estimate at rates 14-28 percentage points above the replica floor (7-21pp under a treatment-independent conditioning; problem-clustered t = 2.9-6.4). Most changes are zero-boundary crossings of the quantized estimator rather than polarity reversals, and the perturbation is consistent with mean-zero, so averaged quantities are largely safe; but selection is not: a critical-token set chosen by thresholding $|\hat{A}_t|$ under re-feed overlaps the exact-resume selection at Jaccard 0.34-0.90, versus a 0.63-0.96 replica ceiling. A causal confirmation closes the loop: under vLLM's batch-invariant kernels all three passes are identical on every measured channel, with both disagreement rates exactly zero. Replica passes themselves disagree on 9-23% of eligible estimates: single-sample credit measurements at decision tokens are unreliable under any replay. Settings were fixed in advance; exact-pass cache hits in the second campaign are instrumented (100% hit rate, 3,434 pivots); total compute was under 10 USD. We recommend that counterfactual credit studies resume decoder state or use batch-invariant kernels, and report a replica floor.

02.
arXiv (CS.CV) 2026-06-18

Bidirectional Cross-Attention Fusion of High-Resolution RGB and Low-Resolution Hyperspectral Inputs for Multimodal Semantic Segmentation

Multimodal semantic segmentation with heterogeneous sensors must reconcile complementary information across modalities that differ in spatial resolution and channel dimensionality. In particular, high-resolution RGB imaging provides detailed spatial structure but often fails to distinguish visually similar materials, whereas hyperspectral imaging (HSI) provides discriminative spectral signatures but at lower spatial resolution. We present Bidirectional Cross-Attention Fusion (BCAF), which aligns high-resolution RGB with low-resolution HSI at their native grids via localized, bidirectional cross-attention, avoiding pre-upsampling or early spectral collapse. BCAF uses two independent backbones: a standard Swin Transformer for RGB and an HSI-adapted Swin backbone that preserves spectral structure through 3D tokenization with spectral self-attention. Although our evaluation targets RGB-HSI fusion, BCAF is modality-agnostic and applies to co-registered RGB with lower-resolution, high-channel auxiliary sensors. On the benchmark SpectralWaste dataset, BCAF delivers strong performance, achieving 75.4% at 55 images/s. We further evaluate a novel industrial dataset: K3I-Cycling (first RGB subset already released on Fordatis). On this dataset, BCAF reaches 62.3% mIoU for material segmentation (paper, metal, plastic, etc.) and 66.2% mIoU for plastic-type segmentation (PET, PP, HDPE, LDPE, PS, etc.). These results show that preserving native-grid spatial detail and spectral structure improves multimodal segmentation under real-time constraints. Code and model checkpoints are publicly available at https://github.com/jonasvilhofunk/BCAF_2026.

03.
arXiv (CS.LG) 2026-06-19

Meta Flow Maps enable scalable reward alignment

arXiv:2601.14430v2 Announce Type: replace-cross Abstract: Controlling generative models is computationally expensive. This is because optimal alignment with a reward function–whether via inference-time steering or fine-tuning–requires estimating the value function. This task demands access to the conditional posterior $p_{1|t}(x_1|x_t)$, the distribution of clean data $x_1$ consistent with an intermediate state $x_t$, a requirement that typically compels methods to resort to costly trajectory simulations. To address this bottleneck, we introduce Meta Flow Maps (MFMs), a framework extending consistency models and flow maps into the stochastic regime. MFMs are trained to perform stochastic one-step posterior sampling, generating arbitrarily many i.i.d. draws of clean data $x_1$ from any intermediate state. Crucially, these samples provide a differentiable reparametrization that unlocks efficient value function estimation. We leverage this capability to solve bottlenecks in both paradigms: enabling inference-time steering without inner rollouts, and facilitating unbiased, off-policy fine-tuning to general rewards. Empirically, our single-particle steered-MFM sampler outperforms a Best-of-1000 baseline on ImageNet across multiple rewards at a fraction of the compute.

04.
bioRxiv (Bioinfo) 2026-06-20

Seed variation impacts clustering stability in Single-Cell RNA-Seq and can be mitigated by StAbility-BasEd-Reassignment (SABER)

Single-cell RNA-seq clustering is commonly treated as reproducible once a random seed is fixed, yet the choice of seed itself may alter cell assignments and downstream interpretation. We systematically quantified seed-induced clustering variability by running Louvain and Leiden clustering across 100 seeds in Seurat and Scanpy on 28 single-cell RNA-seq datasets from the Human Cell Atlas and IMMUcan. Using Element-Centric Consistency, we found that seed choice affected a substantial fraction of cells, with Scanpy showing more unstable assignments than Seurat on average, 40.46% versus 26.78% unstable cells, respectively. This increased stability came at a marked computational cost: Seurat required approximately 19-fold higher median memory than Scanpy. Seed-dependent clustering variability also propagated to cell-type annotation, particularly among transcriptionally related populations including macrophage/monocyte, endothelial/epithelial and T/NK cell states. To mitigate this instability, we developed StAbility-BasEd Reassignment (SABER), a Scanpy-based framework that identifies seed-sensitive cells across repeated clusterings and reassigns them to stable cluster cores using cosine similarity. SABER improved clustering quality while preserving annotation concordance and reduced median memory usage 3.5-fold compared with Seurat-Louvain. Our results identify seed choice as an underappreciated source of variability in single-cell analysis and provide a scalable strategy to improve clustering robustness.

05.
arXiv (CS.AI) 2026-06-19

PrototypeNAS: Rapid Design of Deep Neural Networks for Microcontroller Units

arXiv:2603.15106v2 Announce Type: replace Abstract: Enabling efficient deep neural network (DNN) inference on edge devices with different hardware constraints is a challenging task that typically requires DNN architectures to be specialized for each device separately. To avoid the huge manual effort, one can use neural architecture search (NAS). However, many existing NAS methods are resource-intensive and time-consuming because they require the training of many different DNNs from scratch. Furthermore, they do not take the resource constraints of the target system into account. To address these shortcomings, we propose PrototypeNAS, a zero-shot NAS method to accelerate and automate the selection, compression, and specialization of DNNs to different target microcontroller units (MCUs). We propose a novel three-step search method that decouples DNN design and specialization from DNN training for a given target platform. First, we present a novel search space that not only cuts out smaller DNNs from a single large architecture, but instead combines the structural optimization of multiple architecture types, as well as optimization of their pruning and quantization configurations. Second, we explore the use of an ensemble of zero-shot proxies during optimization instead of a single one. Third, we propose the use of Hypervolume subset selection to distill DNN architectures from the Pareto front of the multi-objective optimization that represent the most meaningful tradeoffs between accuracy and FLOPs. We evaluate the effectiveness of PrototypeNAS on 12 different datasets in three different tasks: image classification, time series classification, and object detection. Our results demonstrate that PrototypeNAS is able to identify DNN models within minutes that are small enough to be deployed on off-the-shelf MCUs and still achieve accuracies comparable to the performance of large DNN models.

06.
arXiv (CS.CL) 2026-06-16

Emergent retokenization symmetry in large language models: phenomenology and applications

Tokenization introduces representational redundancy: under a fixed token vocabulary, every byte string admits many valid token encodings, or segmentations, that decode to the same surface string. However, given a prompt, most language model tokenizers break this representational symmetry by returning a canonical segmentation. Training only on canonical segmentations should influence inference behavior, and there is little reason to expect models to respect segmentation symmetry on downstream tasks. We find that this symmetry partially emerges during training. Here, we probe this emergent symmetry through experiments testing token compositional understanding, representation diversity, and task focused benchmark performance. We primarily use retokenization – replacing a prompt's canonical tokenization with an alternative segmentation while preserving its bytes exactly. Relative to other prompt perturbations, retokenization is unusually clean because it isolates segmentation effects without changing syntax, semantics or surface form. We use retokenization to study sensitivity and robustness to semantically identical input representations across pretraining and post-training. Moreover, this partial retokenization symmetry suggests a distinct inference-time sampling axis. While temperature sampling generates diverse outputs from the model using its next-token probability distribution, retokenization generates diversity from the model's internal computations through semantically equivalent input representations. We find that while this retokenization sampling strategy can hurt performance on easy problems, it can also recover solutions that conventional sampling does not find. Overall, our work presents retokenization as a simple yet powerful probe of large language models, shedding light on compositional understanding and prompt sensitivity, and offering a novel sampling strategy.

07.
arXiv (quant-ph) 2026-06-15

Quasilinear Equivalence Checking for Detector Error Models

arXiv:2606.14677v1 Announce Type: new Abstract: A Detector Error Model (DEM) is a structured representation of error mechanisms in quantum circuits, which has gained popularity in quantum compilation pipelines for its ability to capture fault-tolerance at a circuit level. It lists error mechanisms as instructions targeting detectors and observables, specifying for each physical fault channel the probability that the fault fires, the detectors it triggers, and the observables it flips. In this paper, we develop an equational theory for DEMs, with its associated categorical semantics. We present a sound, terminating, confluent rewriting system for DEM terms, formulating it as a symmetric monoidal theory (a PROP) over the Giry monad. We prove that every DEM term has a unique normal form, which can be computed efficiently in quasilinear time $O(k|E|\log|E|)$, where $|E|$ is the number of instructions and $k$ bounds the size of a target set. This provides a complete set of invariants (via Tanner graphs) for structural DEM equivalence. We provide the first static decision procedure for DEM equivalence, with rigorous correctness guarantees. It is complete (decides full decoder-equivalence exactly) for non-adaptive quantum error correction (QEC) pipelines, and scales to a sound and applicable decision procedure for partially-adaptive circuits (lattice surgery, distributed QEC, ...) without suffering exponential overhead. We discuss its application to the verification and optimisation of quantum compilers.

08.
arXiv (CS.AI) 2026-06-18

InfoPO: Information-Driven Policy Optimization for User-Centric Agents

arXiv:2603.00656v2 Announce Type: replace Abstract: Real-world user requests to LLM agents are often underspecified. Agents must interact to acquire missing information and make correct downstream decisions. However, current multi-turn GRPO-based methods often rely on trajectory-level reward computation, which leads to credit assignment problems and insufficient advantage signals within rollout groups. A feasible approach is to identify valuable interaction turns at a fine granularity to drive more targeted learning. To address this, we introduce InfoPO (Information-Driven Policy Optimization), which frames multi-turn interaction as a process of active uncertainty reduction and computes an information-gain reward that credits turns whose feedback measurably changes the agent's subsequent action distribution compared to a masked-feedback counterfactual. It then combines this signal with task outcomes via an adaptive variance-gated fusion to identify information importance while maintaining task-oriented goal direction. Across diverse tasks, including intent clarification, collaborative coding, and tool-augmented decision making, InfoPO consistently outperforms prompting and multi-turn RL baselines. It also demonstrates robustness under user simulator shifts and generalizes effectively to environment-interactive tasks. Overall, InfoPO provides a principled and scalable mechanism for optimizing complex agent-user collaboration. Code is available at https://github.com/kfq20/InfoPO.

09.
arXiv (CS.CV) 2026-06-16

DCP-Prune: Ultra-Low Token Pruning with Distribution Consistency Preservation

Recent vision token pruning methods effectively preserve model performance under moderate token budgets but become unstable under ultra-low token budget. Our analysis shows that as the pruning budget decreases, accuracy degradation is often accompanied by larger feature distribution shifts. Critically, the degree of this distribution shift strongly correlates with performance degradation. To better characterize this phenomenon, we introduce a lightweight distribution consistency metric to estimate the distribution shift between retained and full tokens. Motivated by these observations, we propose a two-stage pruning framework consisting of Anchor-Context Graph Recovery (ACGR) and Text-Aware Token Cluster Selection (TATCS). Specifically, ACGR transfers contextual information before token removal, while TATCS dynamically re-selects representative tokens when severe distribution shift is detected. Extensive experiments demonstrate that our method achieves superior and more stable performance under ultra-low token budget. Notably, it retains 92.1% of the upper-bound average performance on LLaVA-1.5-7B with only 16 visual tokens.

10.
arXiv (CS.LG) 2026-06-12

COSMOS: Model-Agnostic Personalized Federated Learning with Clustered Server Models and Pseudo-Label-Only Communication

arXiv:2605.11165v2 Announce Type: replace Abstract: Federated learning (FL) in heterogeneous environments remains challenging because client models often differ in both architecture and data distribution. While recent approaches attempt to address this challenge through client clustering and knowledge distillation, simultaneously handling architectural and statistical heterogeneity remains difficult. We introduce COSMOS, a model-agnostic framework that enables server-side personalization using only pseudo-label communication. Clients train local models and predict on the public data; the server clusters clients by prediction similarity, trains a cluster-specific model for each group using its own compute, and distills the resulting models back to clients. We provide the first theoretical analysis showing that distillation from the learned cluster models can yield exponential personalization risk contraction, going beyond the convergence-to-stationarity guarantees typically provided in model-agnostic FL. Experiments across benchmarks demonstrate that COSMOS consistently outperforms all model-agnostic FL baselines while remaining competitive with state-of-the-art personalized FL methods. More broadly, our results highlight personalized server-side learning with pseudo-labels as a promising paradigm for scalable and model-agnostic federated learning in highly heterogeneous environments.

11.
arXiv (math.PR) 2026-06-15

Laws of Large Numbers for Non-Independent Random Variables on Hyperspaces with respect to the Hausdorff Metric

arXiv:2011.07199v5 Announce Type: replace Abstract: This paper investigates the limit behavior of the Minkowski sums for sequences of set-valued random variables. When the underlying space is finite dimensional, by using the support function, we establish the weak and strong laws of large numbers for non-independent random variables in the hyperspace with respect to the Hausdorff metric $d_H$.

12.
Nature (Science) 2026-06-17

A distant brown dwarf coplanar to a warm Jupiter and a hot super-Earth

In transiting planetary systems, in which planetary sizes are accurately determined from transit observations, the presence of transit-timing variations1 (TTVs), especially when combined with radial velocity (RV) data, provides powerful constraints on masses and orbital eccentricities. Together, these measurements offer crucial insights into system architecture, formation mechanisms and dynamical evolution. We present long-term RV and transit/TTV monitoring of the relatively young star (age approximately 1 Gyr) TOI-201, revealing an exceptional multi-planet system composed of a hot super-Earth (SE) size planet transiting every 5.8 days, a warm Jupiter (WJ) on a 53-day orbit and an eccentric (e = 0.62) low-mass brown dwarf (BD) on an approximately 8-year orbit, with an estimated mass MBD of about 16 Jupiter masses. The BD is the longest-period transiting substellar object ever characterized by means of RVs and the only one known to be coplanar with inner planets. The architecture of this system suggests that the SE was formed isolated and in the innermost region of the gaseous disk. On the other hand, the orbital configuration of the outer companions suggests a nearly in situ formation of both objects, with the WJ forming in a dense inner disk. Alternatively, the BD might have formed farther out and migrated inward, while increasing its eccentricity owing to interactions with the disk. Analysis of long-term radial velocity data and transit time variations, induced by a super-Earth, a warm Jupiter and a brown dwarf in a coplanar orbit around the relatively young star TOI201.

13.
arXiv (CS.LG) 2026-06-19

A graph neural network surrogate model for mesh-based crashworthiness prediction of vehicle panel components

arXiv:2503.17386v2 Announce Type: replace-cross Abstract: Crashworthiness is a key performance measure in the design of safety-critical vehicle panel components such as B-pillars. Finite element (FE) simulations are widely used to evaluate crash responses but remain computationally expensive for large-scale, nonlinear impact scenarios, particularly when integrated into iterative design and optimisation processes. Although machine learning-based surrogate models have been developed for rapid crashworthiness analysis, they exhibit limitations in detailed representation of complex 3-dimensional components. Graph Neural Networks (GNNs) have emerged as a promising solution for processing data with complex structures. However, existing GNN models often lack sufficient accuracy and computational efficiency to meet industrial demands. This paper proposes Recurrent Graph U-Net (ReGUNet), a graph-based surrogate model for crashworthiness analysis of vehicle panel components. By representing FE meshes in graph form, the model naturally accommodates complex irregular structural geometries. Its hierarchical architecture improves computational efficiency and accuracy, while the introduction of recurrence enhances stability of temporal predictions over multiple time steps. A side-impact case study of hot-stamped steel B-pillars with varying geometries is used to generate training dataset. The trained model demonstrates high accuracy in predicting the dynamic deformation behaviour and crashworthiness indicators of previously unseen component designs. ReGUNet achieves over a 52% reduction in the average deformation prediction error relative to baseline methods, together with markedly improved computational efficiency. ReGUNet provides rapid and reliable crashworthiness assessments, which in turn accelerates the design cycle of vehicle panel components.

14.
arXiv (CS.AI) 2026-06-19

Bi-Anchor Interpolation Solver for Accelerating Generative Modeling

arXiv:2601.21542v3 Announce Type: replace-cross Abstract: Flow Matching (FM) models have emerged as a leading paradigm for high-fidelity synthesis. However, their reliance on iterative Ordinary Differential Equation (ODE) solving creates a significant latency bottleneck. Existing solutions face a dichotomy: training-free solvers suffer from significant performance degradation at low Neural Function Evaluations (NFEs), while training-based one- or few-steps generation methods incur prohibitive training costs and lack plug-and-play versatility. To bridge this gap, we propose the Bi-Anchor Interpolation Solver (BA-solver). BA-solver retains the versatility of standard training-free solvers while achieving significant acceleration by introducing a lightweight SideNet (1-2% backbone size) alongside the frozen backbone. Specifically, our method is founded on two synergistic components: 1) Bidirectional Temporal Perception, where the SideNet learns to approximate both future and historical velocities without retraining the heavy backbone; and 2) Bi-Anchor Velocity Integration, which utilizes the SideNet with two anchor velocities to efficiently approximate intermediate velocities for batched high-order integration. By utilizing the backbone to establish high-precision ``anchors'' and the SideNet to densify the trajectory, BA-solver enables large interval sizes with minimized error. Empirical results on ImageNet-256^2 demonstrate that BA-solver achieves generation quality comparable to 100+ NFEs Euler solver in just 10 NFEs and maintains high fidelity in as few as 5 NFEs, incurring negligible training costs. Furthermore, BA-solver ensures seamless integration with existing generative pipelines, facilitating downstream tasks such as image editing.

15.
arXiv (CS.LG) 2026-06-19

TetriServe: Efficiently Serving Mixed DiT Workloads

arXiv:2510.01565v4 Announce Type: replace Abstract: Diffusion Transformer (DiT) models excel at generating high-quality images through iterative denoising steps, but serving them under strict Service Level Objectives (SLOs) is challenging due to their high computational cost, particularly at larger resolutions. Existing serving systems use fixed-degree sequence parallelism, which is inefficient for heterogeneous workloads with mixed resolutions and deadlines, leading to poor GPU utilization and low SLO attainment. In this paper, we propose step-level sequence parallelism to dynamically adjust the degree of parallelism of individual requests according to their deadlines. We present TetriServe, a DiT serving system that implements this strategy for highly efficient image generation. Specifically, TetriServe introduces a novel round-based scheduling mechanism that improves SLO attainment by (1) discretizing time into fixed rounds to make deadline-aware scheduling tractable, (2) adapting parallelism at the step level and minimizing GPU hour consumption, and (3) jointly packing requests to minimize late completions. Extensive evaluation on state-of-the-art DiT models shows that TetriServe achieves up to 32% higher SLO attainment compared to existing solutions without degrading image quality.

16.
arXiv (quant-ph) 2026-06-16

Quantum-classical hybrid models based on error correction for time series forecasting

arXiv:2606.15213v1 Announce Type: new Abstract: Time series forecasting largely benefits from combining the strengths of different models, especially using a scheme where a model corrects another model by capturing supplementary patterns from forecasting errors. Concurrently, quantum models are providing a means to augment the classical capacity, including in time series forecasting, by acting alongside classical models in hybrid architectures. In this work, we propose the first forecasting system based on error correction that jointly uses quantum and classical models. Here, quantum models first extract patterns by exploring quantum phenomena, and classical models capture the remaining patterns from the quantum errors. Compared to classical single models and classical-classical hybrid models based on error correction, the complementary capacity that emerges from this quantum-classical system provided the best results in most of the addressed problems. Therefore, this work paves the way to introduce quantum models in established hybridization schemes for time series forecasting.

17.
arXiv (CS.LG) 2026-06-15

LoMC: Localized Multidirectional Correction for Refusal Suppression in Routed Foundation Models

arXiv:2606.13709v1 Announce Type: cross Abstract: We study controlled post-training refusal suppression in routed MoE and hybrid-MoE foundation models, aiming to increase non-refusal target-response behavior while preserving general capability under a compact intervention footprint. Existing broad direction-based edits can perturb general-purpose computation, whereas support-only expert edits often lack sufficient capacity to correct heterogeneous refusal representations. To address this limitation, we introduce Localized Multidirectional Correction (LoMC), a support-gated intervention framework that follows a support-then-correction execution order: it first identifies a compact edit support, then aggregates prototype correction directions into layer-wise correction directions, and finally applies rank-one layer-wise correction only within the selected support. By using the edit support as a structural gating constraint, LoMC increases correction capacity without expanding the intervention scope. Experiments on text-only and multimodal safety benchmarks across four routed backbones show that LoMC substantially improves non-refusal target-response behavior while maintaining general capability under a compact intervention footprint.

18.
arXiv (CS.CV) 2026-06-16

ToaSt: Token Channel Selection and Structured Pruning for Efficient ViT

Vision Transformers (ViTs) have achieved remarkable success across various vision tasks, yet their deployment is often hindered by prohibitive computational costs. While structured weight pruning and token compression have emerged as promising solutions, they suffer from prolonged retraining and inter-layer dependencies that complicate optimization, respectively. We propose ToaSt, a decoupled framework applying specialized strategies to distinct ViT components. We apply coupled head-wise structured pruning to Multi-Head Self-Attention modules, leveraging attention operation characteristics to enhance robustness. For Feed-Forward Networks (over 60% of FLOPs), we introduce Token Channel Selection (TCS), a training-free method that filters redundant noise channels at inference time. Extensive evaluations across nine diverse models, including DeiT, ViT-MAE, and Swin Transformer, demonstrate that ToaSt achieves superior trade-offs between accuracy and efficiency, consistently outperforming existing baselines. On ViT-MAE-Huge, ToaSt achieves 88.52% accuracy (+1.64%p) with 39.4% FLOPs reduction. ToaSt also transfers effectively to diverse downstream tasks (COCO detection, ADE20K segmentation, CIFAR-100 classification), achieving 52.2 versus 51.9 mAP on COCO. Code: github.com/SHANNonLab-HUFS/ToaSt

19.
arXiv (CS.CV) 2026-06-16

GeoRoPE: Ground-Aware Rotary Adaptation for Remote Sensing Foundation Models

Remote-sensing foundation models (RSFMs) benefit from pretraining on imagery from multiple sensors and ground sampling distances (GSDs), but such exposure alone does not resolve scale mismatch during downstream adaptation. A fixed token-grid offset can correspond to different ground distances across sensors, making grid-based positional priors physically inconsistent. Meanwhile, heterogeneous spatial granularity means that compact urban regions and homogeneous landscapes may require different positional sensitivities even under the same GSD. Therefore, we propose {GeoRoPE}, a ground-aware, RoPE-compatible, and parameter-efficient spatial adaptation method for RSFMs. GeoRoPE recalibrates token-level positional interactions from two complementary aspects. First, Geo-Coordinate Calibration (GCC) rescales raw token-grid offsets according to the ground distance represented by one token-grid step, producing geo-calibrated relative coordinates across GSDs. Second, Geo-Frequency Calibration (GFC) adjusts the native RoPE frequency with a relation-specific factor, enabling position sensitive adaptation to scene-dependent spatial granularity. GeoRoPE is injected into pretrained RSFMs through a lightweight adapter, preserving the frozen spatial prior while adding geo-aware positional corrections. Experiments across multiple RSFMs, sensors, resolutions, and downstream tasks demonstrate that GeoRoPE improves cross-resolution robustness and scale-sensitive representation learning.

20.
arXiv (CS.CV) 2026-06-15

Prompt2Effect: Training-Free Image-to-Video Model Specialization via LoRA Generation

Personalizing Image-to-Video (I2V) diffusion models with specific visual effects is increasingly demanded for high-end video generation. Current practice requires training a separate Low-Rank Adaptation (LoRA) module for each effect, incurring substantial data curation and iterative optimization costs that hinder interactive control. We present Prompt2Effect, a weight-driven hypernetwork that amortizes per-effect training by directly synthesizing effect-specific LoRA weights in a single forward pass. Unlike prior hypernetworks that regress adapter weights purely from semantics, Prompt2Effect is explicitly conditioned on the frozen base model weights, grounding weight prediction in the structural geometry of each layer. Furthermore, instead of predicting raw LoRA matrices, we introduce an SVD-canonicalized parameterization that resolves factorization ambiguity and stabilizes large-scale weight synthesis. Together, these design principles enable accurate and scalable LoRA prediction for high-dimensional I2V diffusion models. Extensive experiments demonstrate that Prompt2Effect achieves on-par or superior video quality and effect alignment compared to conventional LoRA fine-tuning, while reducing the computational cost from 56 GPU training hours to 3.3 seconds of hypernetwork inference. When used as initialization for subsequent fine-tuning, our predicted weights further improve final performance and accelerate optimization by approximately 10x.

21.
medRxiv (Medicine) 2026-06-17

The interaction between chronic hepatitis B (CHB) and Metabolic dysfunction-associated steatotic liver disease (MASLD) in a diverse central London population

Introduction: The overlap between chronic hepatitis B (CHB) and metabolic dysfunction-associated steatotic liver disease (MASLD) is an emerging global health challenge. We investigated the impact of MASLD and metabolic comorbidity in a diverse London viral hepatitis clinic. Methods: This retrospective cross-sectional study (May 2018-Feb 2024) included adults with CHB having controlled attenuation parameter (CAP) measurements. MASLD was defined as CAP >264 dB/m plus [≥]1 cardiometabolic factor (CMF). We used univariable and multivariable models to examine MASLD's relationship with liver stiffness and hepatitis B viral load (HBV VL). Results: Among 323 individuals (67% male, median age 36), most were from Black (35%) or non-white British/Irish (29%) backgrounds. Overall, 64% had [≥]1 CMF, and 20% had MASLD. The CHB/MASLD group was significantly older (median 43 vs 35 years, p

22.
arXiv (CS.LG) 2026-06-11

NetBurst: Event-Centric Forecasting of Bursty, Intermittent Time Series

arXiv:2510.22397v2 Announce Type: replace-cross Abstract: Network operators monitor their infrastructure by collecting telemetry data such as packet counts, byte rates, or flow volumes, yet answering the questions that effective operations demand – forecasting future load, diagnosing and characterizing anomalies, and searching for and retrieving historical precedents – requires more than raw measurements. Bridging this gap calls for learned representations: compact per-entity summaries that capture temporal dynamics from each entity's univariate time series. Time-series foundation models are the natural starting point, but they are designed for dense, periodic benchmark datasets – the mild statistical regime. However, network telemetry data inhabits the wild regime: operationally relevant events are rare, separated by variable-length stretches of low or no activity (``ebbs''), with intermittent bursts of heavy-tailed extremes (``tides''). We present NetBurst, an event-centric pipeline that collapses ebbs, separates each time series into a stream of burst timings and a stream of burst magnitudes, and learns a single representation serving all three operational tasks. Compared to the strongest competitors among eight baselines – including Amazon's Chronos-2 and Datadog's Toto – and across nine production telemetry configurations, NetBurst reduces median forecasting error by $1.3$–$116\times$ on wild-regime data with a $1.0$–$7.5\times$ better match to the true burst distribution, and matches baselines on mild-regime benchmarks. For characterizing anomalies, NetBurst produces balanced, well-spread clusters that are $16\times$ more describable in operator-familiar terms under a novel interpretability score, and cluster-filtered search delivers $7.5\times$ faster end-to-end retrieval.

23.
arXiv (CS.AI) 2026-06-16

WorkflowPerturb: Calibrated Stress Tests for Evaluating Multi-Agent Workflow Metrics

arXiv:2602.17990v2 Announce Type: replace Abstract: Multi-agent LLM systems that generate structured workflows from natural-language requests are now deployed in production across cloud automation, DevOps, and enterprise process orchestration. Operating such systems exposes a recurring change-management problem. Routine updates, such as re-running the same input, swapping the underlying LLM, or refactoring an agent's prompt or orchestration code, frequently produce workflows that differ substantially from previously validated references. Engineers are then left without a principled way to decide whether a change is safe to ship. Automatic workflow evaluation is the natural tool for answering this question. In practice, however, metric scores are poorly calibrated, and a numeric change rarely communicates the severity of the underlying degradation. We introduce WorkflowPerturb, a controlled benchmark for studying workflow evaluation metrics by applying realistic, graded perturbations to golden workflows. WorkflowPerturb contains 4,973 golden workflows and 44,757 perturbed variants across three perturbation types (Missing Steps, Compressed Steps, and Description Changes), each applied at severity levels of 10%, 30%, and 50%. We benchmark multiple metric families and analyze their sensitivity and calibration using expected score trajectories and residuals. Our results characterize systematic differences across metric families and support severity-aware interpretation of workflow evaluation scores in change-management settings. Our dataset will be released upon acceptance.

24.
arXiv (CS.CV) 2026-06-16

Multi-Modal Attention for Automated Disaster Damage Assessment Using Remote Sensing Imagery and Deep Learning

Timely and accurate disaster damage assessment is crucial for effective emergency response, resource allocation, and recovery. Traditional methods, which often rely on manual inspections or sparse data, are typically slow and error-prone. This paper introduces a novel framework leveraging remote sensing imagery and deep learning to automate building damage classification. Using pre- and post-disaster satellite imagery, our model categorizes buildings into four damage levels: no damage, minor damage, major damage, and destroyed. The core innovation is a multi-modal attention mechanism that fuses bi-temporal features to explicitly detect and assess structural changes. We employ a lightweight ConvNeXT-Tiny backbone to ensure efficient processing without compromising performance. Key contributions include: (1) a cross-attention module for multi-modal data fusion, (2) an optimized preprocessing pipeline for large-scale datasets, and (3) robust data augmentation techniques. Experiments on a large-scale disaster dataset demonstrate an overall classification accuracy of 94.90%. The model effectively discriminates between damage categories and remains resilient to incomplete data. This system significantly improves assessment speed and accuracy, aiding emergency responders in prioritizing interventions. This work advances automated disaster damage detection by integrating multi-temporal imagery with deep learning, offering a scalable solution for real-time response.

25.
arXiv (CS.AI) 2026-06-19

cAPM: Continual AI-Assisted Pace-Mapping with Active Learning

arXiv:2606.19373v1 Announce Type: cross Abstract: Ventricular tachycardia is a life-threatening rhythm disorder and a major cause of sudden cardiac death. Pace-mapping is a clinical procedure for identifying the intervention target during catheter ablation of VT. It requires clinicians to pace different sites in the ventricles and rapidly interpret the resulting electrocardiograms to determine where to pace next or whether a target site has been identified. Active learning AI models have been proposed to guide clinicians to the next pacing site, showing promise in reducing the number of pacing sites and improving the efficiency of pace-mapping. Existing methods require retraining each target without the ability to transfer knowledge across multiple VTs within the same patient or across patients. We introduce cAPM for continuous AI-assisted pace-mapping to capture and transfer knowledge accumulated from past pace-mapping data to reduce the number of pace-mapping data needed for future target VTs. This is made possible by a task-agnostic surrogate neural network that learns the mapping from pacing sites to 12-lead ECG morphology, an active-learning strategy that refines this surrogate model by selecting the most informative pacing site for each target, and a continual learning strategy to do so sequentially while retaining knowledge from prior targets. Evaluated on an in-silico testbed consisting of sequentially-presented localization tasks across different physiological conditions and ventricular geometries, cAPM with and without replay of past data samples achieved an 81% probability of localizing within clinical tolerance (5 mm accuracy) using 4.5 pace-mapping sites, compared to the state-of-the-art active-learning method achieving 38% probability using 13.7 pacing sites. These results provide a strong basis for preparing cAPM towards in-vivo preclinical and clinical studies where it can be used to guide pace-mapping.