Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.LG) 2026-06-16

ShipNet: A Geometric Deep Learning Surrogate for Real-Time Ship Hydrodynamics

arXiv:2606.15356v1 Announce Type: cross Abstract: Accurate prediction of hydrodynamic performance is central to ship design, yet high-fidelity computational fluid dynamics remains prohibitively expensive for large-scale parametric exploration. This motivates the development of data-driven surrogate models that provide rapid approximations to hydrodynamic predictions at substantially reduced cost. We present ShipNet, a geometric deep-learning surrogate that predicts both hull-surface pressure distributions and far-field free-surface wave patterns directly from hull geometry and speed. The network employs a regularized dynamic graph convolutional backbone on hull point clouds, with a multi-head decoder for simultaneous near-body pressure and free-surface elevation outputs. Training data consist of 420 inviscid free-surface simulations generated using a potential-flow panel method for two parent yacht hulls, each parameterized into 70 variants and evaluated at three speeds. ShipNet predicts per-point pressure coefficient and two-dimensional wave elevation map using a composite loss that combines point-wise regression and image-structure terms. On a geometry-held-out test set, ShipNet achieves R^2=0.98 for hull pressure and R^2=0.91 for wave fields. Inference requires approximately 0.15s per case, yielding over a 550x speedup relative to the potential-flow solver on conventional hardware. Limitations include the restricted geometry and speed ranges and the inviscid training data, while future work will extend the model to high-fidelity viscous simulations with physics-informed regularization.

02.
arXiv (CS.LG) 2026-06-11

A Riemannian Approach to Low-Rank Optimal Transport

arXiv:2606.12120v1 Announce Type: new Abstract: Low-rank optimal transport (OT) mitigates the quadratic scaling of classical solvers, yet existing approaches rely heavily on first-order mirror-descent updates that require careful hyperparameter tuning and ignore the optimization landscape's curvature. To address these limitations, we propose a unified Riemannian geometric framework for low-rank OT, modeling balanced and unbalanced rank-$r$ positive factored couplings as novel smooth embedded submanifolds of the positive orthant. By equipping these manifolds with the Fisher-Rao product metric, we derive tractable formulations for Riemannian projectors, retractions, and Hessian-vector products. Our cost-agnostic framework seamlessly extends to linear OT, Gromov-Wasserstein (GW), fused GW, and their unbalanced counterparts. For balanced OT, our geometric ingredients are computed via efficient conjugate-gradient and iterative Bregman updates. For the unbalanced OT, our operations elegantly reduce to closed-form scalings, completely eliminating inner iterative loops. In both regimes, per-iteration complexity scales linearly with dataset size, and we provide a rank-sufficiency certificate for global optimality verification. Extensive experiments across a range of problem sizes demonstrate that our regularization-free first- and second-order solvers achieve faster convergence and superior performance over existing state-of-the-art low-rank OT solvers.

03.
arXiv (CS.CL) 2026-06-11

To Intervene or Not: Guiding Inference-time Alignment with Probabilistic Model Blending

The wide deployment of LLMs has made model alignment necessary to make newly trained models safely and effectively respond to user instructions. Among different methods, inference-time alignment is often cheaper as it intervenes (i.e., offers guidances) only during output generation. Existing proposals apply guidances extracted from certain aligned models without properly assessing their reliability. Nonetheless, our systematic evaluation reveals that guidance effectiveness varies drastically across models; since ineffective guidances lead to further confusion and thus further interventions, the resulting excessive interventions typically indicate poor performance. To make interventions more effective and thus more efficient, we introduce BlendIn, an inference-time alignment framework that shifts from binary decisions to creating hybrid distributions integrating both models' knowledge. BlendIn stabilizes inference-time alignment by performing quality-aware alignment and proportionally weighting each model's contribution based on reliability. Compared with existing works, it preserves beneficial guidance while downweighting unreliable suggestions. BlendIn provides both diagnostic signals and mitigation strategies for misaligned guidance, achieving consistent and up to 50% performance improvement on challenging model pairs. Our code is available at: https://github.com/DecayingSeart/BlendIn.

04.
arXiv (CS.CV) 2026-06-25

SparseGS: Sparse View Synthesis using 3D Gaussian Splatting

3D Gaussian Splatting (3DGS) has recently enabled real-time rendering of unbounded 3D scenes for novel view synthesis. However, this technique requires dense training views to accurately reconstruct 3D geometry. A limited number of input views will significantly degrade reconstruction quality, resulting in artifacts such as "floaters" and "background collapse" at unseen viewpoints. In this work, we introduce SparseGS, an efficient training pipeline designed to address the limitations of 3DGS in scenarios with sparse training views. SparseGS incorporates depth priors, novel depth rendering techniques, and a pruning heuristic to mitigate floater artifacts, alongside an Unseen Viewpoint Regularization module to alleviate background collapses. Our extensive evaluations on the Mip-NeRF360, LLFF, and DTU datasets demonstrate that SparseGS achieves high-quality reconstruction in both unbounded and forward-facing scenarios, with as few as 12 and 3 input images, respectively, while maintaining fast training and real-time rendering capabilities.

05.
arXiv (quant-ph) 2026-06-25

Quantum-inspired Topographic Stereovision

arXiv:2606.02197v2 Announce Type: replace Abstract: We revisit the conventional triangulation in distant stereovision, when shape rather than distance is the relevant observable. We show through the information-regret analysis that the optimal measurements for absolute distance and relative topography are unexpectedly different and incompatible, exposing an observable-measurement mismatch. To resolve this, we introduce stereo regularization to address stereo anisotropies that violate prevailing emitter-number conservation. Accordingly, we propose a topographic interferometer, which exploits cross-detector correlations to probe topography without measuring the distance profile. Our Fizeau-imaging interferometer turns parallax paths into Mach-Zehnder arms and employs a central path as the local oscillator for balanced homodyne detection, saturating the quantum Fisher information with improved topographic error scaling. This enables topographic stereovision of thermal sources beyond the Rayleigh limit, with feasible experimental demonstrations within existing techniques for remote sensing and astronomy.

06.
arXiv (CS.LG) 2026-06-12

Toward General Digraph Contrastive Learning: A Dual Spatial Perspective

arXiv:2510.16311v2 Announce Type: replace Abstract: Graph Contrastive Learning (GCL) has emerged as a powerful tool for extracting consistent representations from graphs, independent of labeled information. However, existing methods predominantly focus on undirected graphs, disregarding the pivotal directional information that is fundamental and indispensable in real-world networks (e.g., social networks and recommendations).In this paper, we introduce S2-DiGCL, a novel framework that emphasizes spatial insights from complex and real domain perspectives for directed graph (digraph) contrastive learning. From the complex-domain perspective, S2-DiGCL introduces personalized perturbations into the magnetic Laplacian to adaptively modulate edge phases and directional semantics. From the real-domain perspective, it employs a path-based subgraph augmentation strategy to capture fine-grained local asymmetries and topological dependencies. By jointly leveraging these two complementary spatial views, S2-DiGCL constructs high-quality positive and negative samples, leading to more general and robust digraph contrastive learning. Extensive experiments on 7 real-world digraph datasets demonstrate the superiority of our approach, achieving SOTA performance with 4.41% improvement in node classification and 4.34% in link prediction under both supervised and unsupervised settings.

07.
arXiv (CS.LG) 2026-06-19

Evaluating Universal Machine Learning Force Fields Against Experimental Measurements

arXiv:2508.05762v2 Announce Type: replace-cross Abstract: Universal machine learning force fields (UMLFFs) promise to revolutionize materials science by enabling rapid atomistic simulations across the periodic table. However, their evaluation has been limited to computational benchmarks that may not reflect real-world performance. We introduce UniFFBench, a comprehensive evaluation framework featuring the MinX dataset – a diverse collection of 1,500+ mineral systems spanning 85 elements, extreme thermodynamic conditions (0–5000 K, 0–1000 GPa), and structural complexity, including partial occupancy and disorder. This diversity, combined with experimental reference values for validation, enables assessment of UMLFF generalization across chemical space and conditions substantially beyond typical training scenarios. Our systematic evaluation of six state-of-the-art UMLFFs reveals a substantial ``reality gap'': models achieving impressive performance on computational benchmarks often fail when confronted with experimental complexity. Even the best-performing models exhibit higher density prediction error than the threshold required for practical applications. We observe disconnects between simulation stability and mechanical property accuracy, with prediction errors correlating with training data representation rather than the modeling method.

08.
medRxiv (Medicine) 2026-06-24

Development and Validation of Machine Learning Models for Predicting Initiation of Emergency Dialysis in Advanced Chronic Kidney Disease

Background: Initiation of emergency dialysis, often requiring temporary catheter owing to unprepared definitive vascular access, is associated with infectious and vascular complications and suggests advanced chronic kidney disease (CKD) care gaps. Previous studies focused on kidney failure or dialysis timing. This study aimed to predict initiation of emergency dialysis using machine learning and baseline data. Methods: This retrospective cohort study used the Japan Medical Data Center claims data (2014-2022). Adults with an estimated glomerular filtration rate (eGFR)

09.
arXiv (quant-ph) 2026-06-17

Quantum Routers: A Switching-Fabric Framework for Quantum-Native Forwarding

arXiv:2606.17773v1 Announce Type: new Abstract: Forwarding in quantum networks cannot be realized by directly transposing classical switching fabrics, since the no-cloning theorem and the quantum measurement postulate constrain the direct relay of quantum information while ruling out copy-based buffering and inspection. In this paper, we propose a switching-fabric framework for quantum routers based on multipartite entanglement. Specifically, we formalize the notion of an entanglement-based switching fabric, in which a graph state acts as the forwarding resource and entanglement forwarding is realized through local Pauli measurements. We translate the classical notions of blocking and non-blocking operation into structural conditions for entanglement-based fabrics, by deriving the edge-controlled (EC) design principle for non-blocking operation. We instantiate this principle through a monolithic EC crossbar and a modular Clos-type EC fabric, for which we characterize resource scaling and identify the regime where the modular design becomes more resource-efficient than the monolithic one. Finally, a forwarding-latency analysis establishes a fundamental distinction between matching-oblivious and matching-driven forwarding: the proposed EC fabrics realize all requested input-output entanglement links with constant forwarding depth under sufficient measurement parallelism, whereas matching-driven EPR-based fabrics exhibit latency that scales with the number of requested connections. The proposed framework provides a hardware-agnostic foundation for quantum-router switching fabrics.

10.
arXiv (CS.CV) 2026-06-24

Boosting Text-Driven Video Segmentation via Geometry-Aware Distillation

Text-driven Referring Video Object Segmentation (RVOS) aims to locate and segment target objects in videos given natural language. However, existing models are typically trained on 2D image or video datasets with naive segmentation losses, which overlooks the geometric consistency across frames and leads to weak spatial understanding. In this paper, we propose Geometry-enhanced Language-guided Video segmentation (GeoLaV), a two-stage framework that distills 3D geometric knowledge from images to enhance text-driven video segmentation. In the first stage, we perform monocular geometry pretraining with monocular novel-view synthesis, enabling the model to acquire geometry-consistent visual representations via spatial alignment on large-scale single-image datasets. In the second stage, we introduce geometry-aware distillation and fine-tune the model on video segmentation datasets, transferring 3D structural knowledge from a general 3D prior model. This process reinforces 3D awareness and improves both spatiotemporal coherence and language grounding in segmentation. Extensive experiments show that our method using only image segmentation data already provides notable zero-shot generalization in RVOS. When combined with geometry-aware distillation for fine-tuning on videos, our method achieves state-of-the-art performance across multiple RVOS benchmarks. The code is available at https://github.com/Tony1882880/GeoLaV.

11.
arXiv (CS.CV) 2026-06-17

Colab NAS: Obtaining lightweight task-specific convolutional neural networks following Occam's razor

The current trend of applying transfer learning from convolutional neural networks (CNNs) trained on large datasets can be an overkill when the target application is a custom and delimited problem, with enough data to train a network from scratch. On the other hand, the training of custom and lighter CNNs requires expertise, in the from-scratch case, and or high-end resources, as in the case of hardware-aware neural architecture search (HW NAS), limiting access to the technology by non-habitual NN developers. For this reason, we present ColabNAS, an affordable HW NAS technique for producing lightweight task-specific CNNs. Its novel derivative-free search strategy, inspired by Occam's razor, allows to obtain state-of-the-art results on the Visual Wake Word dataset, a standard TinyML benchmark, in just 3.1 GPU hours using free online GPU services such as Google Colaboratory and Kaggle Kernel.

12.
arXiv (CS.CV) 2026-06-18

Automatic ply-specific analyses of CFRP micrographs using shortest-path-based ply distinction

We present an automated approach to distinguish between ply instances in semantic segmentation masks of high-resolution carbon-fiber reinforced polymer micrographs. Interpreting the segmentation mask as a graph with pixels as vertices, enables us to use a shortest-path algorithm yielding the ply-separating paths. Thereby, we bridge the gap between semantic segmentation and ply instance segmentation using global information. We successfully apply our approach on high-resolution micrographs featuring a broad range of characteristics like artificially added gaps in single or multiple plies, different stacking sequences and ply traversing cracks. Assigning each fiber pixel to a ply based on the calculated paths, allows for a comprehensive, quantitative ply analysis with respect to its microstructural properties like the local fiber volume fraction as well as locally resolved ply and interleaf layer thickness. These insights help to reveal manufacturing-induced inhomogeneities, draw conclusions on manufacturing parameters and link mechanical properties to underlying microstructural imperfections.

13.
arXiv (CS.CL) 2026-06-15

Efficiency-Performance Trade-offs in Neural Speaker Diarization via Structured Pruning and Low-Bit Quantization

Streaming speaker diarization is crucial for time-critical medical dispatch, but deploying it on resource-constrained hardware requires smaller, faster models. Using SIMSAMU, a dataset of simulated medical-dispatch conversations, we evaluate streaming behavior before compressing the segmentation model with pruning and low-bit quantization. We characterize performance across a range of streaming latency budgets and find that additional buffering is not consistently beneficial, while very low-latency operating points can substantially degrade performance. Our study shows that model compression trades performance for memory footprint, and we highlight an operating point where FP16 reduces model size by half with essentially unchanged real-time factor, at a cost of a 40\% relative DER increase against the baseline. This work characterizes the trade-offs for real-time deployment and contributes to speech technology that can enable reliable human communication in time-critical contexts.

14.
arXiv (CS.AI) 2026-06-19

PrefSQA: Pairwise Preference Prediction for Speech Quality Assessment and the Critical Role of High Quality Datasets

arXiv:2606.19597v1 Announce Type: cross Abstract: Mean opinion scores (MOS) are widely used for speech quality assessment, yet scalar labels are sensitive to rater variability and listening test differences. This introduces labeling noise, which limits the reliability of MOS prediction. Preference prediction reduces this variability as listeners compare signals directly, producing cleaner labels. We study MOS-free preference prediction and propose PrefSQA, which incorporates uncertainty-aware logits, an impairment attention head, and a module based on non-matching-reference comparisons. We use and refine five datasets, including MOS-derived and low-noise simulated sets with matching and non-matching content, experiment with human preference sets, and test on unseen data. Experiments show small improvements on MOS-derived data, while other sets reveal clear improvement over the baselines, highlighting the value of high-quality preference data and demonstrating the effectiveness of the proposed method.

16.
arXiv (CS.AI) 2026-06-25

What Actually Works for Spacecraft Fault-Tolerant Control: An Honest Settled-Gate Benchmark of Learned and Classical Methods

arXiv:2606.25374v1 Announce Type: new Abstract: Recent learned fault-tolerant-control (FTC) work reports high success on spacecraft actuator faults, but often in simulation, on narrow fault sets, and with transient metrics that a trajectory need only touch once. We ask what recovers spacecraft pointing when success means holding it on faults never seen in training. We answer with a benchmark built around a settled gate, pointing held within 0.2 deg over a dwell window and scored on the true state, train/test splits disjoint in inertia, gain, sign pattern, and bias, Wilson intervals over n=500 episodes per cell, and one-command reproduction on a 6-DOF Basilisk testbed. Across classical, adaptive, learned end-to-end, and structured controllers, three findings stand out. Fault-unaware PD/PID and from-scratch end-to-end RL score 0%, so learning capacity alone is not the lever. Classical adaptive laws resolve sign faults but handle gain poorly at 55.2%, and a literature-faithful Nussbaum-gain law reaches 45.2% and 3.2%. A structured estimate-then-control design, with a learned recurrent module that infers actuator gain online and feeds an analytic law, wins on sign and gain faults at 97.8% and 94.4%, approaching the privileged oracle while unstructured methods remain at zero. The hard wall is constant additive bias, which is 0% for every controller including the privileged gain oracle, because an integral-free law cannot null a constant disturbance. We close it with a disturbance observer that recovers bias from the dynamics and is self-correcting for gain-estimate error. Composed with the gain estimate, it recovers 59.4% of held-out bias faults with no sign/gain regression, moving that class off zero. We classify sensor-fault regimes similarly, show that sensor bias is unobservable from the corrupted measurement alone and therefore requires fusion rather than an observer, and release the benchmark so the gate is shared.

17.
medRxiv (Medicine) 2026-06-18

AlphaGenome identifies a deep intronic variant in a family with PLA2G6-associated neurodegeneration: Closing the diagnostic gap in rare genetic diseases

A molecular diagnosis remains out of reach for a substantial subset of patients with clinically recognizable Mendelian disorders, even after comprehensive next-generation sequencing. Causal variants in non-coding regions are difficult to detect and interpret using standard pipelines. Deep intronic variants that disrupt splicing are a known but underexplored source of pathogenic alleles, and systematic tools to evaluate them at scale have only recently emerged. We aimed to resolve an incomplete genetic diagnosis in two siblings with early-onset parkinsonism, prominent neuropsychiatric features, and autonomic dysfunction consistent with PLA2G6-associated neurodegeneration (PLAN), an autosomal recessive condition. Prior clinical exome sequencing, genome sequencing, Multiplex Ligation-dependent Probe Amplification (MLPA), and long-read sequencing had identified only a single heterozygous PLA2G6 missense variant, c.2132C>G (p.Pro711Arg). We used AlphaGenome to score 91 non-coding variants shared among the affected siblings and their father within 1 megabase of the PLA2G6 locus. The deep-learning model identified an intronic variant (c.2034+355G>A) that was predicted to create a cryptic splice acceptor site that could result in inclusion of a 160-bp cryptic exon. Tissue-specific predictions indicated the aberrant splicing would be detectable in blood, confirmed by junction-spanning RNA-seq reads from an unrelated carrier. This analysis completed a compound heterozygous PLAN diagnosis nearly two decades after symptom onset and demonstrates the utility of sequence-to-function models. Systematic integration of tools like AlphaGenome into rare disease workflows offers a practical, low-barrier route to closing the diagnostic gap for patients with compelling Mendelian phenotypes and incomplete genetic diagnoses.

18.
arXiv (CS.CV) 2026-06-11

Task-Aware Structured Memory for Dynamic Multi-modal In-Context Learning

Multi-modal large language models (MLLMs) depend on in-context learning (ICL) for rapid task adaptation, but their scalability is severely limited by finite context windows and the growing cost of key-value (KV) caches in long multi-modal sequences. Existing memory compression approaches typically rely on rigid token removal or sample-dependent importance estimation, which introduces bias, disrupts semantic structure, particularly for visual representations, and yields static memories that cannot adapt to new queries. We introduce TASM (Task-Aware Structured Memory), a training-free framework that addresses these limitations through task-aware, structure-preserving, and dynamically accessible memory construction. TASM employs task-vector guided compression to replace sample-specific signals with a task-level direction that captures shared relevance across demonstrations. To preserve the underlying manifold, it applies semantics-aware token merging via bipartite graph matching, aggregating tokens without destructive pruning. Finally, TASM structures memory into a hierarchy comprising a compact Core Memory and a Latent Bank, facilitating query-adaptive dynamic retrieval. Evaluations confirm TASM maintains high performance under heavy compression, effectively balancing efficiency with adaptability.

19.
arXiv (CS.CL) 2026-06-25

Aligning Human-AI-Interaction Trust for Mental Health Support: Survey and Position for Multi-Stakeholders

Building trustworthy AI systems for mental health support is a shared priority across stakeholders from multiple disciplines. However, "trustworthy" remains loosely defined and inconsistently operationalized. AI research often focuses on technical criteria (e.g., robustness, explainability, and safety), while therapeutic practitioners emphasize therapeutic fidelity (e.g., appropriateness, empathy, and long-term user outcomes). To bridge the fragmented landscape, we propose a three-layer trust framework, covering human-oriented, AI-oriented, and interaction-oriented trust, integrating the viewpoints of key stakeholders (e.g., practitioners, researchers, regulators). Using this framework, we systematically review existing AI-driven research in mental health domain and examine evaluation practices for ``trustworthy'' ranging from automatic metrics to clinically validated approaches. We highlight critical gaps between what NLP currently measures and what real-world mental health contexts require, and outline a research agenda for building socio-technically aligned and genuinely trustworthy AI for mental health support.

20.
arXiv (CS.CL) 2026-06-25

Digital Twin-Driven Adaptive Sim-to-Real Alignment via Reinforcement Learning for Vibration-Based Bearing Health Monitoring Under Data Scarcity

Vibration-based health monitoring of rotating machinery requires reliable fault diagnosis under operational data constraints, yet condition assessment remains challenged by structural scarcity of fault events and heterogeneous sim-to-real gaps in digital twin-generated signals. Each fault type generates impulses with distinct periodicity, amplitude modulation, and spectral character, making feature-space discrepancies fundamentally heterogeneous across fault classes. Existing domain adaptation methods apply a class-agnostic global transformation that cannot close all fault-specific gaps without distorting inter-class separability, while uniform source-target mixing introduces distributional noise into the data-abundant Normal class. These limitations stem from treating a sequential, state-dependent alignment problem as a one-shot optimization. Each corrective transformation simultaneously reshapes all class distributions, creating state dependencies that static gradient descent cannot resolve. We formulate feature alignment as a continuous-action Markov decision process solved via Proximal Policy Optimization, where the learned policy issues fault-type-specific affine corrections responsive to the current feature-space configuration, with a dual-objective reward balancing gap minimization against separability preservation. An asymmetry-aware strategy reserves real data for the Normal class while augmenting fault classes with policy-aligned simulated samples. Validation across XJTU-SY, CWRU, and a self-built slewing bearing testbed confirms the dominant gain from reinforcement learning-driven alignment, and cross-equipment linear probing achieves 92.8% without encoder retraining, demonstrating transferable monitoring capability.

21.
arXiv (CS.LG) 2026-06-18

Quantifying and Auditing LLM Evaluation via Positive–Unlabeled Learning

arXiv:2606.19057v1 Announce Type: cross Abstract: Large Language Models (LLMs) are increasingly used as judges for scalable evaluation, yet such LLM–as–a–Judge systems exhibit systematic biases that are decoupled from semantic quality, most notably verbosity bias. Meanwhile, human supervision is costly and typically selective, yielding reliable positive judgments but leaving most outputs unlabelled and potentially mixed in quality. We formulate LLM evaluation under selective human supervision as a positive–unlabelled learning problem and propose a geometric auditing framework based on Partial Optimal Transport. By aligning a small set of human–verified positives with a reliable subset of unlabelled outputs in a fixed embedding space, our method identifies human–consistent preferences and corrects biased judges without retraining. Experiments demonstrate improved alignment with human preferences, increased robustness to presentation biases, and interpretable confidence estimates, offering a scalable and statistically grounded alternative to existing LLM–as–a–judge pipelines.

22.
arXiv (CS.AI) 2026-06-16

Multiple Descents in Deep Learning as a Sequence of Order-Chaos Transitions in LSTM Networks

arXiv:2505.20030v2 Announce Type: replace-cross Abstract: We observe a novel `multiple-descent' phenomenon during the learning process of a recurrent neural network called long-short-term memory (LSTM) networks during its training on real-world task, in which the performance goes through long cycles of up and down trends multiple times after the model is overtrained. By carrying out asymptotic stability analysis of the models, we found that the cycles in performance – indicated by loss function in test data – are closely associated with the phase transition process between order and chaos of the model, and the local optimal training step are consistently at the critical transition point between the two phases. More importantly, the most optimal point of the model usually occurs at the first transition from order to chaos, where the `width' of the `edge of chaos' is often the widest, allowing the best exploration of weight configurations for learning.

23.
arXiv (CS.CV) 2026-06-17

PhaseWin: An Efficient Search Algorithm for Faithful Visual Attribution

Visual attribution is a fundamental tool for interpreting modern vision and vision-language models, particularly when their decisions must be inspected, diagnosed, or audited. Its goal is to explain how a model's decision depends on local regions of the visual input, typically by assigning an importance ordering over candidate image regions. Given an image partitioned into $n$ regions, faithful attribution can be cast as an ordered subset-search problem, in which progressively inserting the selected regions should recover the target model response as early as possible. Exhaustive search over region subsets incurs exponential cost, while the widely used greedy search still requires a quadratic number of model evaluations, because every selection step rescores all remaining candidates. We propose PhaseWin, an efficient subset-search algorithm for faithful visual attribution. PhaseWin reorganizes greedy region selection into a phased window-search procedure: rather than re-evaluating the full candidate set at every step, it alternates between global candidate screening, adaptive pruning, and localized window refinement, while preserving the essential region-ranking behavior of greedy search. We analyze PhaseWin under monotone evidence-accumulation conditions and show that, under feature-level structural assumptions, it attains controllable linear evaluation complexity together with near-greedy faithfulness guarantees. Extensive experiments on image classification, object detection, visual grounding, and image captioning show that, among all compared attribution methods, PhaseWin reaches high faithfulness with the fewest forward passes, empirically realizing the predicted reduction from $O(n^2)$ to $O(n)$. The code is available at https://github.com/Qihuai27/phasewin-va.

24.
arXiv (CS.LG) 2026-06-25

Randomized Kriging Believer for Parallel Bayesian Optimization with Regret Bounds

arXiv:2603.01470v3 Announce Type: replace Abstract: We consider the optimization problem of an expensive-to-evaluate black-box function, in which we can obtain noisy function values in parallel. For this problem, parallel Bayesian optimization (PBO) is a promising approach, which aims to optimize with fewer function evaluations by selecting a diverse input set for parallel evaluation. However, existing PBO methods suffer from poor practical performance or lack theoretical guarantees. In this study, we propose a PBO method, called randomized kriging believer (KB), based on a well-known KB heuristic and inheriting the advantages of the original KB: low computational complexity, a simple implementation, versatility across various BO methods, and applicability to asynchronous parallelization. Furthermore, we show that our randomized KB achieves Bayesian expected regret guarantees. We demonstrate the effectiveness of the proposed method through experiments, including those on real-data emulators.

25.
arXiv (CS.AI) 2026-06-16

AC-ODM: Actor–Critic Online Data Mixing for Sample-Efficient LLM Pretraining

arXiv:2505.23878v2 Announce Type: replace-cross Abstract: Optimizing pretraining data composition is pivotal for LLM generalization. While dynamic mixing outperforms static strategies by capturing evolving training dynamics, current methods fail to reconcile computational efficiency with sample efficiency and structural flexibility for diverse pipelines.We introduce Actor–Critic Online Data Mixing (AC-ODM), which approaches data mixing from a reinforcement learning perspective with a parameterized policy that we theoretically prove to act as a dynamic linear surrogate maximizing the constructive interference of gradients. To enhance practical flexibility, AC-ODM supports two operational modes: (i) a proxy mode for fixed, pre-prepared corpora, where a policy learned on a small model is transferred to a larger target; and (ii) a non-proxy mode for direct end-to-end training from scratch without priors. Empirically, AC-ODM significantly outperforms prior methods in convergence speed and downstream accuracy across various architectures. On Pythia-1B, it reaches optimal validation perplexity using up to 66% fewer training steps than competitive baselines, delivering a 27.5% relative improvement in MMLU accuracy and a 2.23 x higher pass@1 on HumanEval, all while incurring a virtually negligible (0.4%) per-step wall-clock increase and only 2% additional memory overhead. Code is available at https://github.com/DANG-ai/AC-ODM.