Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.LG) 2026-06-11

Mahalanobis-Guided Latent OOD Detection for Hybrid ES-DRL Control in Time-Varying Systems

arXiv:2606.11474v1 Announce Type: new Abstract: In this paper, we study Mahalanobis-guided latent out-of-distribution (OOD) detection for test-time RL controller switching in nonlinear time-varying systems. RL controllers can quickly control high-dimensional systems within the training distribution, but their performance can degrade when time-varying dynamics produce unseen observations. We consider a combined ES–DRL controller, where RL provides fast in-distribution actions and bounded extremum seeking (ES) provides robust model-independent control under OOD operation. The key challenge is deciding when to switch. We train a variational autoencoder (VAE) on in-distribution beam-profile observations and use Mahalanobis distance in the VAE latent space to detect OOD beam profiles at test time. This OOD decision sets a binary switch that selects either the RL controller or the ES controller. We evaluate the approach in safety-critical particle accelerator control. In this setting, spatial magnet motion creates OOD beam profiles that were not seen during RL training. Visualization of the VAE latent space shows that the proposed method identifies this OOD scenario and provides an interpretable signal for switching between RL and ES in the combined controller.

02.
arXiv (CS.LG) 2026-06-16

Anomaly Detection via Mean Shift Density Enhancement

arXiv:2602.03293v2 Announce Type: replace Abstract: Unsupervised anomaly detection stands as an important problem in machine learning. Existing unsupervised anomaly detection algorithms rarely perform well across different anomaly types, often excelling only under specific structural assumptions. This lack of robustness also becomes particularly evident under noisy settings. We propose Mean Shift Density Enhancement (MSDE), a fully unsupervised framework that detects anomalies through their geometric response to density-driven manifold evolution. MSDE is designed as a general purpose anomaly detection framework, based on the principle that normal samples, being well supported by local density, remain stable under iterative density enhancement, whereas anomalous samples undergo large cumulative displacements as they are attracted toward nearby density modes. To operationalize this idea, MSDE employs a weighted mean-shift procedure with adaptive, sample-specific density weights derived from a manifold learning-based fuzzy neighborhood graph. We evaluate MSDE on an anomaly detection benchmark comprising 46 real-world tabular datasets, four realistic anomaly generation mechanisms, and six noise levels. Compared to 13 established unsupervised baselines, MSDE achieves consistently strong, balanced and robust performance for several standard classification metrics, at several noise levels and on average over several types of anomalies. These results demonstrate that displacement-based scoring provides a robust alternative to the existing state-of-the-art for unsupervised anomaly detection.

03.
bioRxiv (Bioinfo) 2026-06-11

VFUSE: Virulent Feature Understanding with Sparse autoEncoders

Generative models have shown remarkable progress in a variety of domains such as protein design, but such power enables the opaque generation of hazardous proteins. In this work, we introduce VFUSE (Virulent Feature Understanding with Sparse autoEncoders), a mechanistic interpretability approach that trains SAEs on diffusion-transformer activations to audit protein models for hazard-aware features. We apply VFUSE to RoseTTAFold3 and RFDiffusion3, popular open-weight models for protein folding and synthesis. We find that for certain blocks, linear probes detect hazardous designs significantly better when fit in the SAE latent space over the original model's representations: improving interpretability without sacrificing model performance. Furthermore, we identify monosemantic features from the SAE that fire only on hazardous designs at up to AUROC 0.84 (q < 10-13).

04.
arXiv (CS.CV) 2026-06-16

SP$^3$: Spherical Priors for Plug-and-Play Restoration

In this paper, we introduce SP$^3$, a novel Plug-and-Play algorithm that accelerates maximum a posteriori image restoration by replacing denoisers with Spherical Encoders (SE) as generative priors. SP$^3$ approximates the intractable proximal prior step by utilizing the SE tightly structured latent space as a robust projection onto the natural image manifold. Alternating this projection with a closed-form data-consistency step, via Half-Quadratic Splitting, achieves stable convergence without requiring gradient computation during inference. This unique formulation unlocks "anytime" restoration capabilities, producing sharp, plausible images from the first iteration. Evaluations across a variety of image restoration tasks demonstrate that SP$^3$ achieves perceptual quality comparable to state-of-the-art zero-shot diffusion and flow methods while being $3$-$630\times$ faster.

05.
arXiv (CS.CV) 2026-06-11

TRON: Tracing Rays to Orchestrate a Neural Renderer for 3D Gaussian Reconstructions

We introduce TRON, a rendering framework that combines 3D Gaussian ray tracing with neural rendering to enable realistic and controllable rendering of real-world 3D scenes under novel lighting, dynamic object motion, object insertion, and material editing. Prior approaches that rely solely on physically based rendering (PBR) of Gaussian representations struggle to achieve realistic relighting due to imperfections in reconstructed geometry, material estimates, and light transport estimation. At the same time, neural rendering methods often lack an explicit scene representation, limiting their ability to support interactive editing with fine-grained manipulation. TRON bridges these two paradigms. We use intrinsic decomposition priors from a learned inverse rendering model to regularize the material properties of a Gaussian field, and repurpose a ray tracer to provide radiometric guidance rather than final pixels. By treating this output as a structured 3D scaffold, we empower a lightweight neural renderer to bridge the domain gap between shading-model constrained estimates and photorealistic output. Our key insight is that the combination of explicit 3D knowledge with robust material priors provides speed and controllability, while neural rendering enables the synthesis of photorealistic images. To support real-world scenarios, we train our neural renderer with a multi-stage strategy consisting of large-scale pretraining and targeted fine-tuning on a newly constructed dataset of 2.1M rendered synthetic and real-world frames from 3D reconstructions. TRON outperforms Gaussian-based relighting methods in realism, and prior neural renderers in editability and speed. To the best of our knowledge, TRON is the first method to enable practical interactive applications in captured 3D environments, offering realistic appearance under dynamic geometric, lighting and material conditions.

06.
arXiv (quant-ph) 2026-06-12

Kerr-induced nonreciprocal transparency and group delay in a hybrid cavity magnomechanical system

arXiv:2606.13412v1 Announce Type: new Abstract: We propose a scheme for realizing nonreciprocal transparency, Fano resonances, and slow/fast light in a hybrid cavity magnomechanical system containing two YIG spheres and a mechanical resonator. The nonreciprocal behavior originates from the magnon Kerr nonlinearity, which induces direction-dependent frequency shifts and modifies the interference pathways among cavity photons, magnons, and phonons. We show that the hybrid system supports multiple transparency windows arising from magnon- and magnomechanical-induced interference processes. The Kerr interaction strongly reshapes these transparency features, producing asymmetric Fano line shapes and enabling controllable nonreciprocal transmission. Furthermore, the associated dispersion exhibits pronounced directional asymmetry, leading to giant differences in the group delay for opposite propagation directions and allowing reversible switching between slow- and fast-light regimes. We investigate the roles of hybrid coupling strengths and dissipation channels and identify parameter regimes where the nonreciprocal response is maximized. These findings establish Kerr-engineered magnomechanical systems as promising platforms for integrated nonreciprocal microwave photonics and quantum information technologies.

07.
arXiv (quant-ph) 2026-06-19

Applications of quantum annealing to magnetic dipole hyperfine structure constants: First results beyond energies for atoms

arXiv:2606.20166v1 Announce Type: new Abstract: We report the first results of the magnetic dipole hyperfine structure (HFS) constants of neutral $\mathrm{Li}$, Li-like $\mathrm{Be}$, neutral $\mathrm{Na}$, and Na-like $\mathrm{Mg}$ using a modified version of the Quantum Annealer Eigensolver (QAE) algorithm on D-Wave's quantum hardware. The results are benchmarked against relativistic configuration interaction with multiconfiguration Dirac Hartree-Fock (MCDHF) calculations using the General-purpose Relativistic Atomic Structure Package (GRASP), and simulated annealing. In our modified QAE, a zooming-and-sigma-annealing approach with a floating-point encoding scheme is adopted to estimate the ground-state eigenvalue and eigenvector of the relativistic Dirac-Coulomb Hamiltonian matrices ($H_{\mathrm{DC}}$) constructed from 11 or fewer configuration state functions (CSFs). For calculations with extended correlation orbital sets, we applied a CSF truncation scheme, retaining only CSFs (up to 12) that make significant contributions to the ground-state wavefunction. Our modified QAE precision is kept limited to three decimal places (up to 10 qubits). Hardware demonstrations on the D-Wave quantum processing unit (QPU) yielded results that were completely consistent with GRASP (at the chosen precision) in determining the magnetic dipole HFS constants, with accuracy varying across systems and $H_{\mathrm{DC}}$ matrix dimensions.

08.
arXiv (CS.LG) 2026-06-16

Latent space mapping of interpretable structural coordinates from stochastic single-molecule signals

arXiv:2606.16950v1 Announce Type: cross Abstract: Nanopores are versatile single-molecular sensors, but their utility is fundamentally constrained by stochastic translocation dynamics warping any encoded information. We resolve it by shifting from time-domain analysis to a learned latent-space mapping via a contrastive encoder trained exclusively on simulated signals from a physics-informed model. This encoder maps solid-state nanopore signals of engineered DNA barcodes into an interpretable molecular coordinate system. The learned representation is responsive to structural barcode parameters while remaining invariant to acquisition conditions and translocation conformation, allowing data pooling across devices. Molecule identification requires a single pass through the encoder, reducing computational cost by three orders of magnitude relative to alignment-based methods. We experimentally validate through mixture quantification, rare-variant detection, consensus barcode reconstruction, and real-time signal acquisition. This shift from temporal analysis to mapping structural coordinates into a latent space changes the paradigm behind analyzing stochastic sensor signals by linking classification to interpretable encoded molecular information.

09.
arXiv (CS.CV) 2026-06-15

HARBOR: Heading Analysis and Reconstruction from Behavioral Observation and Radar

Maritime situational awareness often relies on Automatic Identification System (AIS) transmissions to track vessel movements. However, in operational or conflict scenarios, these data may be unavailable due to signal loss, deliberate deactivation, or intentional spoofing. In such conditions, synthetic aperture radar (SAR) imagery becomes a critical sensing alternative for wide-area maritime monitoring, despite providing only static scene snapshots. This work introduces HARBOR (Heading Analysis and Reconstruction from Behavioral Observation and Radar), a complete pipeline for transforming a single SAR image into predictive motion information without requiring any auxiliary data source at inference time. The method begins with SAR image preprocessing to enhance and segment vessel candidates, followed by automatic detection, size-based classification, and heading estimation using skeleton geometry and local intensity patterns. AIS data are used exclusively during an offline calibration phase to derive vessel-type-dependent motion parameters, which are then applied to generate probabilistic heatmaps of candidate future vessel positions. A case study using real COSMO-SkyMed SAR imagery demonstrates the pipeline on a maritime scene in southern Brazil, showing its ability to extract motion tendencies and generate probabilistic projections of vessel positions in data-denied environments.

10.
arXiv (CS.AI) 2026-06-12

AI-Automation Tooling in Computer Engineering Education: Mixed-Methods TAM/UTAUT Evidence for a General Acceptance Attitude

Authors:

arXiv:2606.12424v1 Announce Type: cross Abstract: As generative AI and low-code workflow platforms become routine in software practice, a key educational question is whether the next generation of computer engineers will accept these tools as useful, usable, and worthy of sustained engagement. This paper reports a mixed-methods, cross-sectional study of undergraduate computer engineering students' acceptance of AI automation tooling, instantiated through the open-source platform n8n across three identically scripted workshops in Thailand (n = 103). A 12-item, five-point Likert instrument mapped to six TAM/UTAUT constructs - Performance Expectancy (PE), Effort Expectancy (EE), Behavioral Intention (BI), Self-Efficacy (SE), Hedonic Motivation (HM), and Output Quality (OQ) - was complemented by inductive thematic analysis of open-ended feedback. Analyses combined ordinal reliability estimation, bootstrap confidence intervals, non-parametric tests, multiple-comparison-controlled correlations, polychoric dimensionality diagnostics, a common-method-bias check, and between-session comparisons. Acceptance was favorable across all six constructs with large effect sizes, with PE emerging as the strongest construct and HM as the weakest. Dimensionality diagnostics further revealed that canonical TAM/UTAUT sub-facets collapsed into a single general acceptance factor in this short-form post-workshop context, a finding with important methodological and theoretical implications. Qualitative themes converged with the quantitative profile regarding usefulness and enthusiasm but diverged on output quality, revealing a small yet articulate reliability-skeptical minority. The findings support the curricular adoption of AI automation tooling in undergraduate computing education and identify three theory-grounded instructional levers: instruction-sequencing scaffolds, self-efficacy supports, and trust-calibration interventions.

11.
arXiv (CS.LG) 2026-06-15

Neither Parallel Nor Sequential: How DiffusionGemma Actually Commits Tokens

arXiv:2606.14620v1 Announce Type: new Abstract: Open diffusion language models are marketed as parallel, non-autoregressive decoders, yet the order in which a shipped checkpoint actually commits its tokens is almost never measured. We instrument DiffusionGemma 26B, a masked discrete-diffusion mixture-of-experts model built on Gemma 4, hooking its sampler's accept step to record which canvas positions commit, when, and at what confidence. Across a 686-prompt, six-regime probe suite we find that its decoding is neither parallel nor block-autoregressive: it follows a partial left-to-right commit bias whose apparent strength depends almost entirely on the granularity at which you look. Order is weak token by token and strengthens smoothly as the analysis is coarsened, so the model's "block size" turns out to be an artifact of the measuring ruler rather than the architecture. The model commits in large simultaneous batches, leaving much of the within-batch order genuinely undefined rather than merely unobserved. The behaviour is regime-dependent: structured JSON is committed in essentially arbitrary order, and a position's commit confidence tracks correctness on mathematical reasoning but carries no signal on factual recall. Commitment is aggressive, finishing in a short late burst well inside the step budget, while task accuracy matches the model's autoregressive Gemma-4 sibling. Beyond these findings, our central contribution is methodological: measuring decoding order honestly demands handling trailing-EOS padding, within-regime confounding, commit non-monotonicity, block-size sensitivity, and large commit-batch ties, each of which can otherwise manufacture a decoding-order result that is not really there.

12.
arXiv (CS.AI) 2026-06-11

A Physics-Inspired Optimizer: Velocity Regularized Adam

arXiv:2505.13196v3 Announce Type: replace-cross Abstract: We introduce Velocity-Regularized Adam (VRAdam), a physics-inspired optimizer for training deep neural networks that draws on ideas from quartic terms for kinetic energy with its stabilizing effects on various system dynamics. Previous algorithms, including the ubiquitous Adam, operate at the so-called adaptive edge of stability regime during training, leading to rapid oscillations and slowed convergence of loss. However, VRAdam adds a higher order penalty on the learning rate based on the velocity such that the algorithm automatically slows down whenever weight updates become large. In practice, we observe that the effective dynamic learning rate shrinks in high-velocity regimes, and damping oscillations. By combining this velocity-based regularizer for global damping with per-parameter scaling of Adam, we create a powerful hybrid optimizer. For this optimizer, we provide rigorous theoretical analysis of operation at the edge of stability from a physical and control perspective for the momentum. Furthermore, we derive convergence bounds with the rate $\mathcal{O}(\ln(N)/\sqrt{N})$ for a stochastic non convex objective under mild assumptions. We demonstrate that VRAdam exceeds the performance against standard optimizers including AdamW. We benchmark various tasks such as image classification, language modeling, and generative modeling using diverse architectures and training methodologies including Convolutional Neural Networks (CNNs), Transformers, and GFlowNets.

13.
arXiv (CS.CV) 2026-06-18

Fuzzy-Geometric Branch-Point Modeling for Structure-Aware Augmentation of Handwritten Chinese Characters

Data scarcity and structural distortion significantly limit handwriting recognition in high-security authentication. Existing augmentation methods often cause topological and morphological damage, particularly when processing complex Chinese characters where stroke intersections, ligatures, and sharp turns render traditional branch-point detection unreliable. To address this, this paper proposes a fuzzy geometry-driven structure-aware (FGSA) augmentation framework. We model branch points as fuzzy sets within the skeleton space, constructing a continuous branch-point membership field by integrating topological neighborhood evidence with direction field divergence. This membership field is adaptively optimized via an unsupervised surrogate objective, enabling robust stroke decoupling without manual annotation. Finally, kinematically-aligned samples are synthesized through parameterized cubic Bézier reconstruction and multi-strategy perturbations, ensuring a balance between structural fidelity and sample diversity. Moreover, we establish LZUSig, a large-scale, highly challenging dataset specifically dedicated to fine-grained structural degradation in Chinese handwritten signatures. Extensive experiments on CASIA-HWDB1.1, ChiSig, and LZUSig demonstrate that FGSA significantly reduces the word-level error rate ($\Delta$WER), achieving optimal recognition gains over the compared baselines. More importantly, it strikes a robust trade-off among task gain, structural fidelity, and discriminative feature preservation, offering a highly controllable solution for handwriting augmentation.

14.
arXiv (math.PR) 2026-06-15

Stationary measures for higher spin vertex models on a strip

Authors:

arXiv:2309.04897v2 Announce Type: replace-cross Abstract: We introduce a higher spin vertex model on a strip with fused vertex weights. This model can be regarded as a generalization of both the unfused six-vertex model on a strip arXiv:2212.09111 and an 'integrable two-step Floquet dynamics' model introduced in arXiv:1711.08884. We solve for the stationary measure using a fused version of the matrix product ansatz and then characterize it in terms of the Askey-Wilson process. Using this characterization, we obtain the limits of the mean density along an arbitrary down-right path. It turns out that all these models share a common phase diagram, which, after an appropriate mapping, matches the phase diagram of open ASEP. This provides evidence for the universality of this phase diagram.

15.
arXiv (CS.CV) 2026-06-11

Contactless 3D Human Body Measurement Using Depth Cameras for Smart Health Monitoring

Contactless body measurement technologies are becoming increasingly significant for smart health monitoring, digital health applications, and remote patient assessment. Traditional anthropometric measurements typically necessitate physical contact and trained personnel, which may constrain scalability in remote healthcare settings. In this study, we introduce a depth camera-based framework for estimating human body measurements utilizing 3D point cloud data. An Orbbec Astra 2 depth camera was employed to capture RGB images, depth maps, and 3D point clouds of participants. The captured point cloud was processed using Python-based tools, including Open3D, NumPy, and OpenCV, to segment the human body from the background. Key anthropometric measurements, such as height and arm span, were computed. The measurements were obtained through a combination of spatial filtering and landmark selection on the 3D point cloud, followed by the projection of the computed measurements onto the corresponding RGB image using camera intrinsic parameters. In addition to linear measurements, the approximate body volume and visible surface area were estimated using voxel-based occupancy analysis and mesh-based surface reconstruction methods. The experimental results from a single depth capture demonstrated that accurate body measurements and geometric estimates could be obtained from depth camera data without physical contact. This study provides a foundation for future real-time systems that integrate depth sensing with intelligent health monitoring and generative AI models for smart healthcare applications.

16.
arXiv (CS.CV) 2026-06-19

MMD-SLAM: Structure-Enhanced Multi-Meta Gaussian Distribution-Guided Visual SLAM

3D Gaussian Splatting (3DGS) has significantly boosted novel view synthesis and high-fidelity scene reconstruction, expanding the potential of 3DGS-based Visual Simultaneous Localization and Mapping (SLAM) methods. However, most existing systems fail to fully exploit the underlying structural information, which limits rendering quality and often leads to inconsistent maps. To address these limitations, we propose MMD-SLAM, a structure-enhanced Visual SLAM framework that leverages the Atlanta World (AW) assumption to guide a Multi-Meta Gaussian representation for photorealistic mapping. First, we introduce a point-line fusion strategy for pose optimization, where 3D line segments are incorporated to improve tracking robustness and provide additional constraints for mapping. Second, we design a Multi-Meta Gaussian representation with dominant directions, explicitly encoding structural priors from the AW hypothesis. Finally, we propose a Gaussian evolution strategy that adapts to scene geometry and incorporates structural cues into global optimization. Extensive experiments demonstrate that these innovations enable MMD-SLAM to achieve state-of-the-art performance in both tracking accuracy and mapping quality. e.g., our method achieves a 48.56% reduction in ATE RMSE on ScanNet and a 5.71% improvement in PSNR on Replica, compared with MonoGS.

17.
arXiv (CS.AI) 2026-06-16

MuVAP: Multimodal Multiparty Voice Activity Projection for Turn-taking Prediction in the Wild

arXiv:2606.16731v1 Announce Type: cross Abstract: Current multiparty turn-taking models often rely on complex microphone arrays or multi-camera setups, limiting their applicability in human-robot interaction scenarios. We introduce MuVAP, a causal multimodal framework that extends Voice Activity Projection by grounding acoustic predictions in face tracks, enabling speaker-aware turn-taking predictions from a monaural audio stream and a single camera view. To address the combinatorial complexity of modeling multiple speakers, we propose Role-Relative Projection, which maps any N-speaker interaction onto a fixed current versus next floor-holder state. Because existing audiovisual datasets contain disruptive editing cuts that break causal tracking, we introduce the Audio-Visual Conversation Corpus, a 31-hour dataset of unedited, single-camera multiparty conversations. Evaluations demonstrate that MuVAP outperforms strong baselines on Shift-Hold and next-speaker prediction tasks across two- and three-speaker settings.

18.
arXiv (CS.LG) 2026-06-12

When to Align, When to Predict: A Phase Diagram for Multimodal Learning

arXiv:2606.11190v2 Announce Type: replace Abstract: Cross-modal alignment (CA) and cross-modal prediction (CP) are the dominant paradigms for multimodal representation learning, yet there is no systematic understanding of when each succeeds, when each fails, and when cross-modal training helps at all – a gap that leaves practitioners, especially in scientific domains like biomedicine or astrophysics, with heterogeneous instruments and multiple levels of organization and measurement, unable to diagnose why standard methods underperform the best single modality. We develop a unified linear framework that addresses both questions. Under a spiked signal-plus-noise model with structured cross-modal nuisance correlation, we derive separation ratios for both objectives that expose complementary failure modes: alignment whitens each modality and fails when nuisance is strongly correlated across views; prediction encodes whatever is cross-predictable through a one-sided whitening, with recovery governed by source-modality quality. The resulting phase diagram partitions multimodal problems into four regimes: Both, CA only, CP only, and Neither. We present a data-driven procedure to locate real-world datasets in this diagram using a small labeled subsample, identifying the preferred objective and prediction direction before any cross-modal training. Experiments on synthetic data, stereo-vision benchmarks, image-caption pairs, and real astrophysical data validate the predictions in the nonlinear regime, including the Neither regime where cross-modal training is actively harmful. Our framework lets practitioners diagnose their multimodal problem and choose the right objective before committing to training. Code to reproduce the results is available at https://github.com/IlayMalinyak/mm_align_vs_pred.

19.
arXiv (CS.CV) 2026-06-16

RAMS: Resource-Adaptive and Detection-Conditioned Model Switching for Embedded Edge Perception

Edge object detection on embedded hardware requires balancing inference latency and detection quality under changing resource pressure. We present RAMS, a lightweight runtime controller that monitors device pressure, calibrates switching thresholds from idle behavior, and dynamically selects among three resident YOLOv8 tiers (NANO/SMALL/MEDIUM at 320/416/640 px) without model-reload latency. RAMS defines five switching policies, including two detection-conditioned variants that prevent aggressive downgrades after recent vulnerable-road-user (VRU) detections. We further introduce the VRU-Weighted Accuracy Score (SWAS), a scalar metric for offline policy comparison without ground-truth annotations, together with an oracle-bounded variant that separates detector circularity from genuine tier-retention benefit. Across Raspberry Pi 5, x86 laptops, and Jetson Orin ONNX/TensorRT deployments, the same controller equations operate over a 37x latency range. On Jetson Orin TensorRT under heavy load, the safety2 policy achieves 3.41 ms mean latency, 5.6x faster than fixed-MEDIUM inference, while retaining 74% of its proxy accuracy through near-NANO operation with selective SMALL and MEDIUM locks during VRU-positive windows. Detection-conditioned switching improves SWAS by 25.4% under oracle scoring and 47.3% under detector-derived scoring relative to threshold-only policies under heavy load. Live KITTI evaluation reports per-tier VRU recall of 24.2%, 41.2%, and 59.0%, showing that reactive overrides are fundamentally limited by baseline detector recall.

20.
bioRxiv (Bioinfo) 2026-06-11

HalluDesign-NA: Extending HalluDesign for De Novo Nucleic Acid Design

AlphaFold3 has revolutionized the prediction of biomolecular structures and interactions, including atomic-level modeling of nucleic acids. However, the de novo design of structured and functional nucleic acids remains a significant challenge. Here, we extend our HalluDesign framework to nucleic acid design by integrating NA-MPNN for nucleic acid sequence optimization and design. This new framework, HalluDesign-NA, enables iterative sequence-structure co-optimization, facilitating the de novo design of nucleic acids. Computational benchmarking across ssDNA, ssRNA, and aptamer design tasks demonstrates consistent improvements in confidence scores (pLDDT, ipTM), supporting the feasibility of de novo nucleic acid design under various constraints, such as sequence length, symmetry, and protein structure context. We anticipate that HalluDesign-NA will accelerate the de novo design of functional nucleic acids for applications in biotechnology and medicine. The source code for HalluDesign-NA is available at https://github.com/MinchaoFang/HalluDesign_NA.

21.
arXiv (CS.LG) 2026-06-18

A Guide to Estimating Conditional Average Treatment Effects in Competing Risks Settings

arXiv:2606.18281v1 Announce Type: cross Abstract: Conditional average treatment effects (CATEs) are central to treatment decision-making in personalized medicine. In competing risks settings, estimating CATEs from survival data allows for patient-specific assessments of treatment effectiveness for a specific event of interest while properly accounting for alternative event types. This distinction is essential in the presence of comorbidities, where competing causes of death may otherwise confound the therapeutic benefit. Focusing on right-censored survival times with binary treatment, we examine CATEs defined as covariate-conditional differences in the absolute risk for the event of interest at a fixed time. To this end, we study meta-learners which adapt machine learning algorithms for CATE estimation in competing risks scenarios. We systematically compare six meta-learners, combining Cox regression or random survival forests for risk modeling with elastic net regression or random forests for direct CATE modeling. To provide practical guidance on model selection, we evaluate their performance in multiple simulation settings, that differ in hazard complexity, treatment heterogeneity, treatment assignment, event type distribution and censoring. To facilitate applied use, we provide the R package, crsurvlearners, which implements all considered approaches.

22.
arXiv (CS.CV) 2026-06-17

RAVA: Retrieval-Augmented Viewpoint Alignment for Subject-Driven Image Generation

Reference-driven image generation has made rapid progress on identity preservation, but reliable viewpoint control across different subjects remains poorly understood. The difficulty is not merely generating a new image of the target subject: the model must infer the implicit viewpoint of one subject and transfer it to another subject using only image-level evidence, without camera poses, depth, or ray-based conditions. In this setting, existing generators conditioned on multiple image references often rely on spurious semantic correlations, which lead to viewpoint drift, part-level structural mismatches, and missing or unsupported target-specific content. We formulate this challenge as cross-subject viewpoint alignment and propose RAVA, a retrieval-augmented framework that supplies explicit geometric evidence before generation. RAVA first learns a cross-instance viewpoint embedding that retrieves target-subject images aligned with the anchor viewpoint, then applies a LogDet-based subset selection strategy to retain a compact reference set that is both view-consistent and structurally complementary. The selected references are finally consumed by a fine-tuned multi-reference image generator. Experiments show that generic semantic embeddings are nearly random for this task, while the proposed retriever substantially improves viewpoint retrieval quality. On cross-subject generation, RAVA consistently outperforms zero-shot baselines and stronger retrieval alternatives under the same generation backbone. These results indicate that cross-subject viewpoint alignment benefits from retrieval-augmented geometric grounding rather than relying on end-to-end generation alone.

23.
arXiv (CS.CL) 2026-06-18

DSB: Dynamic Sliding Block Scheduling for Diffusion LLMs

Diffusion large language models (dLLMs) have emerged as a promising alternative for text generation, distinguished by their native support for parallel decoding. In practice, block inference is crucial for avoiding order misalignment in global bidirectional decoding and improving output quality. However, the widely-used fixed, predefined block (naive) schedule is agnostic to semantic difficulty, making it a suboptimal strategy for both quality and efficiency: it can force premature commitments to uncertain positions while delaying easy positions near block boundaries. In this work, we analyze the limitations of naive block scheduling and disclose the importance of dynamically adapting the schedule to semantic difficulty for reliable and efficient inference. Motivated by this, we propose Dynamic Sliding Block (DSB), a training-free block scheduling method that uses a sliding block with a dynamic size to overcome the rigidity of the naive block. To further improve efficiency, we introduce DSB Cache, a training-free KV-cache mechanism tailored to DSB. Extensive experiments across multiple models and benchmarks demonstrate that DSB, together with DSB Cache, consistently improves both generation quality and inference efficiency for dLLMs. Code is released at https://github.com/lizhuo-luo/DSB.

24.
arXiv (CS.CV) 2026-06-16

PoseGAM: Robust Unseen Object Pose Estimation via Geometry-Aware Multi-View Reasoning

6D object pose estimation, which predicts the transformation of an object relative to the camera, remains challenging for unseen objects. Existing approaches typically rely on explicitly constructing feature correspondences between the query image and either the object model or template images. In this work, we propose PoseGAM, a geometry-aware multi-view framework that directly predicts object pose from a query image and multiple template images, eliminating the need for explicit matching. Built upon recent multi-view-based foundation model architectures, the method integrates object geometry information through two complementary mechanisms: explicit point-based geometry and learned features from geometry representation networks. In addition, we construct a large-scale synthetic dataset containing more than 190k objects under diverse environmental conditions to enhance robustness and generalization. Extensive evaluations across multiple benchmarks demonstrate our state-of-the-art performance, yielding an average AR improvement of 5.1% over prior methods and achieving up to 17.6% gains on individual datasets, indicating strong generalization to unseen objects. Project page: https://windvchen.github.io/PoseGAM/ .

25.
arXiv (math.PR) 2026-06-11

Micro-macro population dynamics models of benthic algae with long-memory decay and generic growth

arXiv:2505.04289v4 Announce Type: replace Abstract: Benthic algae as a primary producer in riverine ecosystems develop biofilms on the riverbed. Their population dynamics involve growth and decay processes, the former owing to the balance between biological proliferation and mortality, while the latter to mechanical abrasion because of the transport of sediment particles. Contrary to the assumptions of previous studies, the decay has experimentally been found to exhibit long-memory behavior, where the population decreases at an algebraic rate. However, the origin and mathematical theory of this phenomenon remain unresolved. The objective of this study is to introduce a novel mathematical model employing spin processes to describe microscopic biofilm dynamics. A spin process is a continuous-time jump process transitioning between states 0 and 1, and the continuum limit of these processes captures the long-memory decay and generates generic growth. The proposed framework leverages heterogeneous spin rates, achieved by appropriately superposing spin processes with distinct rates, to reproduce the long-memory decay. Computational simulations demonstrate the behavior of the model, particularly emphasizing rate-induced tipping phenomena. This mathematical model provides a computationally tractable interpretation of benthic algae dynamics and their long-term prediction, relevant to river-engineering applications.