Explore the Frontier of Global Academia

01.

arXiv (CS.AI) 2026-06-12 DOI: arXiv:2606.12424

AI-Automation Tooling in Computer Engineering Education: Mixed-Methods TAM/UTAUT Evidence for a General Acceptance Attitude

Authors:

Aung Pyae↗

arXiv:2606.12424v1 Announce Type: cross Abstract: As generative AI and low-code workflow platforms become routine in software practice, a key educational question is whether the next generation of computer engineers will accept these tools as useful, usable, and worthy of sustained engagement. This paper reports a mixed-methods, cross-sectional study of undergraduate computer engineering students' acceptance of AI automation tooling, instantiated through the open-source platform n8n across three identically scripted workshops in Thailand (n = 103). A 12-item, five-point Likert instrument mapped to six TAM/UTAUT constructs - Performance Expectancy (PE), Effort Expectancy (EE), Behavioral Intention (BI), Self-Efficacy (SE), Hedonic Motivation (HM), and Output Quality (OQ) - was complemented by inductive thematic analysis of open-ended feedback. Analyses combined ordinal reliability estimation, bootstrap confidence intervals, non-parametric tests, multiple-comparison-controlled correlations, polychoric dimensionality diagnostics, a common-method-bias check, and between-session comparisons. Acceptance was favorable across all six constructs with large effect sizes, with PE emerging as the strongest construct and HM as the weakest. Dimensionality diagnostics further revealed that canonical TAM/UTAUT sub-facets collapsed into a single general acceptance factor in this short-form post-workshop context, a finding with important methodological and theoretical implications. Qualitative themes converged with the quantitative profile regarding usefulness and enthusiasm but diverged on output quality, revealing a small yet articulate reliability-skeptical minority. The findings support the curricular adoption of AI automation tooling in undergraduate computing education and identify three theory-grounded instructional levers: instruction-sequencing scaffolds, self-efficacy supports, and trust-calibration interventions.

Read & Discuss → View Source →

02.

arXiv (CS.AI) 2026-06-19 DOI: arXiv:2606.20227

QMFOL: Benchmarking Large Language Model Reasoning via Quantifiable Monadic First-Order Logic Test Case Generation

Authors:

Xinyi Zheng↗Ling Shi↗Tianlong Yu↗Yongxin Zhao↗Lorenz Goette↗Kailong Wang↗

arXiv:2606.20227v1 Announce Type: new Abstract: Large Language Models (LLMs) have made significant progress in reasoning, particularly in deductive reasoning, which is crucial for high-stakes decision-making. As models improve, evaluation benchmarks should evolve to keep pace. However, existing benchmarks lack fine-grained control over logical complexity and struggle to balance semantic diversity with logical consistency. To address these issues, we propose QMFOL, an automated framework for generating monadic first-order logic reasoning tasks with quantifiable and controllable complexity. It constructs formal logical structures using conjunction and disjunction patterns, enabling precise control over reasoning depth, width, label types, and distractors. These structures are then translated into natural language via LLMs, with logical consistency ensured through round-trip verification using an external prover. Based on our framework, we build QMFOLBench, a benchmark comprising 2880 instances with 960 configurations across diverse logical and semantic dimensions. Evaluations on six large reasoning models (LRMs) and two LLMs show that performance degrades and computational overhead increases with rising logical complexity. Models perform better on True-labeled tasks than on False or Unknown ones, and exhibit sensitivity to semantic variation. Overall, QMFOL offers a scalable and reliable approach for constructing deductive reasoning benchmarks with controllable complexity, enabling more precise evaluation of reasoning capabilities in modern language models.

Read & Discuss → View Source →

03.

arXiv (CS.CV) 2026-06-24 DOI: arXiv:2606.24564

PatternGSL: A Structured Specification Language for Template-Free and Simulation-Ready 3D Garments

Authors:

Zhenyang Li↗Lutao Jiang↗Yizhou Zhao↗Ying-Cong Chen↗Xin Wang↗Weikai Chen↗Yifan Peng↗

Reconstructing realistic, physically plausible garments from a single image remains a fundamental challenge. Template-free methods capture surface geometry but lack explicit sewing structure for simulation; while programmatic systems are simulation-ready but constrained by predefined templates. This reveals a fundamental representation gap between geometric reconstruction and structured garment construction. We present PatternGSL, a structured garment representation in the form of a template-free and learnable specification language that encodes complete sewing patterns, including panel boundaries, parameterized seams, and explicit stitch topology, in a compact and standardized form. PatternGSL preserves the physical rigor of pattern-based models while removing template dependence, elevating sewing structure as a first-class target for generative modeling. We further propose a vision-language framework that predicts PatternGSL specifications directly from a single image and decodes them into garments using lightweight deterministic validity handling, without optimization-based refinement or manual cleanup. In addition, we introduce PatternGSLData, the first large-scale image-to-GSL paired dataset comprising 300K samples with complete sewing pattern annotations, enabling supervised VLM training for structured garment reconstruction. Experiments demonstrate improved pattern accuracy over prior baselines, explicit sewing-structure recovery, reliable cloth simulation, and pattern-level editing through the same deterministic decoding pipeline. Code and data-processing scripts will be released at https://github.com/PatternGSL/PatternGSL.

Read & Discuss → View Source →

04.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2606.16261

Wavelength-Multiplexed 2D Beam Steering via a Passive Diffractive Network

Authors:

Che-Yung Shen↗Yuhang Li↗Cagatay Isil↗Tianyi Gan↗Mona Jarrahi↗Aydogan Ozcan↗

We introduce a wavelength-addressable diffractive optical network that transforms illumination wavelength into a high-dimensional control parameter for arbitrarily programmable 2D beam steering. The proposed passive architecture comprises cascaded spatially optimized diffractive layers, jointly designed using deep learning, to rapidly map distinct wavelengths to predefined/desired output angles. Unlike conventional single-layer dispersive optical elements, which are physically restricted to 1D linear mapping, this framework harnesses complex wavefront transformations to utilize the illumination wavelength as an intrinsic addressing key for arbitrary 2D beam steering, eliminating the need for mechanical scanning or electronic phase control. We numerically demonstrate wavelength-controlled beam steering across 625 wavelength channels spanning 400-750 nm, realizing a 25 x 25 array of independently addressable beam positions with subwavelength positioning accuracy and high channel fidelity. Unlike conventional gratings, which constrain wavelength routing to a linear trajectory, the proposed diffractive network performs nonlocal wavefront transformations, enabling arbitrary wavelength-to-angle mappings across a 2D field of view. We further validate the proposed framework experimentally in both the terahertz and visible spectral regimes, demonstrating wavelength-multiplexed beam steering using 3D fabricated passive diffractive layers at terahertz frequencies and phase-only spatial light modulators in the visible spectrum. This wavelength-addressable diffractive architecture establishes a compact and scalable paradigm for high-speed programmable beam steering, with potential applications in optical communications, routing, imaging, sensing, and emerging photonic information-processing systems.

Read & Discuss → View Source →

05.

arXiv (CS.LG) 2026-06-18 DOI: arXiv:2605.21115

Automated Byzantine-Resilient Clustered Decentralized Federated Learning for Battery Intelligence in Connected EVs

Authors:

Mouhamed Amine Bouchiha↗Abdelaziz Amara Korba↗Yacine Ghamri-Doudane↗

arXiv:2605.21115v2 Announce Type: replace-cross Abstract: Federated learning (FL) has emerged as a promising paradigm for managing electric vehicle (EV) battery data in intelligent transportation systems (ITS), enabling privacy-preserving tasks such as anomaly detection and capacity estimation. However, most existing frameworks rely on centralized aggregation schemes, which pose critical limitations in terms of security and trust. To address these challenges, we propose ABC-DFL, an automated Byzantine-resilient clustered decentralized federated learning (C-DFL) framework for connected EVs. The proposed incentive-driven C-DFL system replaces the central server with an open-permissioned blockchain, featuring a new dynamic Quorum Byzantine Fault Tolerance (QBFT) protocol and an oracle-based aggregation layer, to enhance trust, security, and automation. At the core of ABC-DFL lies FLECA (Filtered Layered Enhanced Clustering Aggregation), a robust hierarchical aggregation protocol that mitigates Byzantine attacks by having each EV filter malicious updates using an adaptive threshold based on deviations from its reference model update. Oracle nodes, responsible for inter-group aggregation, employ robust clustering to isolate and aggregate model updates from trustworthy EV groups. Comprehensive experimental evaluations demonstrate that FLECA matches FedProx convergence under benign conditions and significantly outperforms existing defenses with attack impact scores below 0.10 in adaptive adversarial scenarios. Furthermore, several learning experiments with multitask models confirm the effectiveness and fairness of the incentive mechanism. Finally, on-chain and off-chain benchmarks validate the practicality of ABC-DFL.

Read & Discuss → View Source →

06.

arXiv (CS.AI) 2026-06-11 DOI: arXiv:2606.12362

Latent World Recovery for Multimodal Learning with Missing Modalities

Authors:

Hui Wang↗Tianyu Ren↗Joseph Butler↗Christopher Baker↗Karen Rafferty↗Simon McDade↗

arXiv:2606.12362v1 Announce Type: cross Abstract: We study multimodal learning under missing modalities, with particular motivation from bioscience applications in which heterogeneous modalities are often only partially available when decisions need to be made. We propose Latent World Recovery (LWR), a framework built on two key ideas: (i) modality-specific embeddings from different modalities are aligned in a shared latent space, and (ii) a unified representation is constructed by fusing only the embeddings of the modalities that are actually available at both training and inference time. Rather than imputing missing modalities or requiring a fixed modality set, LWR treats each modality as a partial perception of an underlying latent state and performs availability-aware representation learning directly from the observed modalities. This combination of neighbor-based latent alignment and availability-aware modality fusion enables robust multimodal prediction under partial observation, while avoiding error propagation from explicit reconstruction of missing modalities. We evaluate the proposed framework on real-world incomplete multi-omics benchmarks and demonstrate that it provides an effective approach to downstream tasks such as cancer phenotype classification and survival prediction.

Read & Discuss → View Source →

07.

arXiv (CS.AI) 2026-06-11 DOI: arXiv:2606.11262

PermDoRA – Understanding Adapter Interference in Language Models: Limits of Parameter-Space Geometry

Authors:

Gowtham Sivaramakrishnan↗Sarvesha Kumar Kombaiah Seetha↗Kishan Gupta Balaji↗Santhosh Baradwaj Vaduvur Ranganathan↗

arXiv:2606.11262v1 Announce Type: cross Abstract: Access control in large language models (LLMs) requires modular mechanisms to enable domain-specific behavior without retraining or cross-domain interference. A common hypothesis is that interference during adapter composition arises from overlap in linear parameter updates, suggesting that enforcing orthogonality or directional independence should improve multi-domain performance. We test this hypothesis using DoRA-RBAC, a hierarchical adapter composition framework based on weight-decomposed low-rank adaptation. We compare conventional Euclidean merging with a geometry-aware Riemannian-inspired merging strategy that approximates the Frechet mean via normalized directional averaging across multiple QA benchmarks (GPQA, PubMedQA, SimpleQA, WMDP) on LLaMA-3.1-8B and Mistral-7B. Our results show that while single-domain performance matches LoRA, geometry-aware merging provides no consistent advantage over standard averaging in multi-domain settings.Diagnostic analysis further reveals that angular alignment and orthogonality of adapter updates are weak predictors of composition performance. These findings suggest that adapter interference is not governed primarily by parameter-space geometry, but is instead consistent with interactions in shared nonlinear representations.

Read & Discuss → View Source →

08.

arXiv (CS.AI) 2026-06-16 DOI: arXiv:2606.16501

Post-Hoc Merging is Not Enough: Many-Shot Model Merging with Loss-Gap Balancing

Authors:

Kyungjin Im↗Miru Kim↗Chanin Eom↗Minhae Kwon↗

arXiv:2606.16501v1 Announce Type: new Abstract: Model merging has become a practical post-training strategy for building a single multi-task large language model (LLM) by combining multiple task-specialized models. However, most existing approaches rely on post-hoc merging, in which task-specific models are merged only once after training. This one-shot aggregation often suffers from task interference, leading to information erasure across individual tasks. In this work, we show that replacing post-hoc merging with an iterative many-shot merging protocol is effective in improving multi-task performance. Building on this insight, we propose METIS, Mitigating Erasure from Task Interference for Stable many-shot merging. METIS is a loss-aware many-shot merging method that addresses information erasure in post-hoc merging through task-wise loss-gap weighting and consensus-based masking. Notably, METIS exhibits significant performance improvement on the worst-performing task, effectively mitigating information erasure. (Project page: https://imkyungjin.github.io/METIS/)

Read & Discuss → View Source →

09.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2606.16274

GraphWorld: Long-Horizon Planning with World Models for End-to-End Autonomous Driving

Authors:

Ziying Song↗Caiyan Jia↗Lin Liu↗Lei Yang↗Shengkai Zhang↗Feiyang Jia↗Fengda Zhao↗Peiliang Wu↗Shaoqing Xu↗Chen Lv↗Yadan Luo↗

End-to-end autonomous driving has made significant progress by unifying perception, prediction, and planning within a single learning framework, achieving strong performance in short-horizon decision making. However, most existing E2E-AD methods remain confined to short-horizon planning and lack the ability to model long-term temporal dependencies, which severely limits their generalization and security in complex and highly interactive driving scenarios. In this work, we propose GraphWorld, an E2E-AD framework that explicitly enhances long-horizon planning through latent world modeling. We introduce an Ego-Centric Interaction Graph, which adaptively models critical neighboring agents based on spatial proximity, and propagates relational context to planning queries via cross-node cross-attention. We present a World-State-Conditioned Planning that learns ego-centric latent world representations by modeling interactions between an ego vehicle and surrounding agents. This latent world state captures key interaction dynamics and safety-relevant semantics, and serves as a conditioning signal to guide long-horizon, safety-aware trajectory planning. Extensive experiments on Bench2Drive, NAVSIMv1/2, and nuScenes demonstrate that GraphWorld significantly reduces collision rates and improves long-horizon planning performance, validating its effectiveness in complex driving environments.

Read & Discuss → View Source →

10.

arXiv (CS.LG) 2026-06-12 DOI: arXiv:2401.08301

QoS Improvement in Multi User Cellular-Symbiotic Radio Network Assisted by Active-STAR-RIS

Authors:

Rahman Saadat Yeganeh↗Mohammad Javad Omidi↗Farshad Zeinali↗Mohammad Robat Mili↗Mohammad Ghavami↗

arXiv:2401.08301v2 Announce Type: replace-cross Abstract: In this article, we employ active simultaneously transmitting and reflecting reconfigurable intelligent surfaces (ASRIS) to enhance the quality of 6G cellular network services. The network integrates commensal symbiotic radio (CSR) subsystems to facilitate communication between passive Internet of Things (IoT) users and active users, referred to as symbiotic backscatter devices (SBDs) and symbiotic user equipments (SUEs), respectively. Since the SBDs are passive, transmitting information to the SUEs poses significant challenges. To overcome this challenge, we harness the capabilities of massive multiple input multiple output (MIMO) antennas within the base station (BS) to relay the information transmitted by SBDs with greater power. This scheme uses the non-orthogonal multiple access (NOMA) technique for multiple access among all users, and potential interferences are eliminated using successive interference cancellation (SIC). The primary objective is to maximize the throughput between SBDs and SUEs. To achieve this, we formulate an optimization problem involving variables such as active beamforming coefficients at the BS and ASRIS, phase adjustments of ASRIS, and scheduling parameters between CSR and cellular networks. To solve this optimization problem, we used three deep reinforcement learning (DRL) methods: proximal policy optimization (PPO), twin delayed deep deterministic policy gradient (TD3), and asynchronous advantage actor critic (A3C). These methods were simulated, and the results demonstrate that A3C, TD3, and PPO have the best convergence speeds and achieve the highest increases in network throughput, respectively. Finally, the proposed scheme was evaluated using passive simultaneously transmitting and reflecting RIS (STAR-RIS), which demonstrated poorer performance compared to ASRIS.

Read & Discuss → View Source →

11.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2606.14753

Beyond Self-Attention: Sub-Quadratic Vision Transformers for Fast Image Captioning

Authors:

Chiradeep Ghosh↗Dakshina Ranjan Kisku↗

Image captioning is a challenging and significant task that aims to generate coherent and semantically meaningful textual descriptions for given images. To accomplish this task, it requires a deep understanding of visual content along with the ability to express that understanding in natural language. Despite remarkable progress with transformer-based architectures, existing approaches often suffer from limitations, such as a lack of rich local feature representations and the high computational cost of quadratic self-attention. The proposed model focuses on improving computational efficiency by restructuring the vision transformer architecture. In designing this approach, the standard self-attention mechanism in Vision Transformers is replaced with a probabilistic transformer approach based on a Gaussian Mixture Model (GMM), a soft-clustering technique. Instead of computing pairwise attention among all image patches, the model groups similar patches into a fixed number of clusters using an Expectation-Maximization (EM) algorithm. This clustering-based mechanism reduces the computational complexity from quadratic O(n^2) to linear O(nK), where K

Read & Discuss → View Source →

12.

arXiv (CS.CL) 2026-06-19 DOI: arXiv:2606.19697

Efficiently Representing Algorithms With Chain-of-Thought Transformers

Authors:

Yanhong Li↗Anej Svete↗Ashish Sabharwal↗William Merrill↗

The increasing popularity of reasoning models – language models that output a series of reasoning or thought tokens before producing an answer – is justified, in part, by theoretical results showing that chain-of-thought (CoT) transformers can simulate Turing machines, and thus perform arbitrary computation. However, the Turing machine, while suitable for complexity-theoretic analysis, is not convenient, intuitive, or efficient for discussing algorithms. Algorithms are typically designed and analyzed at a higher level of abstraction, captured by the Word RAM model with random-access memory and unit-cost operations on $\bigO(\log n)$-bit words. As a result, Word RAM algorithms can be substantially more efficient than their Turing machine counterparts, raising the question: Can CoT transformers efficiently simulate Word RAM algorithms? For instance, can they sort $n$ items in $\bigO(n \log n)$ steps or run Dijkstra's algorithm in $\bigO(E + V \log V)$ steps? We answer affirmatively, up to poly-logarithmic overhead. We first establish this for finite-precision transformers with poly-logarithmic width and rightmost unique hard attention, then strengthen the result to two more practical settings with finite width and log-precision: continuous CoT, where reasoning takes the form of vectors rather than tokens, and a hybrid architecture in which transformer layers sit atop a recurrent (linear RNN) layer. In all three cases, we find that CoT can efficiently simulate any Word RAM algorithm with only a poly-logarithmic overhead in $n$. This overhead reduces to log-square when the Word RAM has a ``flat'' instruction set, and only logarithmic for multiplication-free flat instructions – in stark contrast to known CoT simulations of Turing machines, which require quadratic overhead over Word RAM.

Read & Discuss → View Source →

13.

arXiv (CS.CL) 2026-06-24 DOI: arXiv:2606.23915

Do LLM Attribution Metrics Transfer? Auditing Retrieval-Augmented Generation Evaluation Across Datasets and Constructs

Authors:

Tianyu Ding↗Aditya Nannapaneni↗Juan Pablo De la Cruz Weinstein↗

Practice often treats automatic metrics for attribution in LLM retrieval-augmented generation as interchangeable. We audit eight automatic scorers – lexical, embedding, and BERTScore baselines alongside entailment/grounding-trained models (clean and FEVER NLI, the checker MiniCheck) – across three evaluation constructs (provenance/topicality, generated-answer attribution, and fact-check entailment), asking whether any scorer transfers: stays within the 95% confidence interval of the best audited scorer on every dataset of a multi-dataset construct. In the construct with the most multi-dataset human-labeled coverage – generated-answer attribution (AttributionBench's four source datasets, n = 1,610, with independent HAGRID, n = 2,150) – none does: the per-dataset metric rankings invert (Kendall tau = -0.64, p = 0.031 on AttributedQA vs. LFQA), and an off-the-shelf NLI scorer that is best on short-claim AttributedQA (AUROC 0.90) collapses to AUROC 0.53 (chance) on long-form LFQA, where BERTScore wins (0.91); the flip is not a length or truncation artifact. This instability has a concrete decision cost: a naive "best-on-average" rule for choosing an evaluator fails leave-one-dataset-out (mean held-out regret 0.172 AUROC, worse than fixing one scorer), so metric choice must be validated on the target dataset rather than learned from others. A prompt-based LLM judge avoids the chance-level collapses the automatic scorers suffer (no LFQA collapse) but is not uniformly best, ~100x costlier, and non-deterministic – relocating, not removing, the validation burden.

Read & Discuss → View Source →

14.

arXiv (CS.AI) 2026-06-24 DOI: arXiv:2606.24046

Rapid FinFET Modelling Using an Autoencoder

Authors:

Amit Sarkar Suman Sau↗Swagata Mandal↗

arXiv:2606.24046v1 Announce Type: cross Abstract: This work presents a machine learning framework that leverages an autoencoder (AE) for the efficient modeling of FinFET. We first calibrated a BSIM-CMG model to generate a dataset of current-voltage (ID-VG) characteristics. This data was used to train an autoencoder that compresses full I-V curves into a low-dimensional latent space, which intrinsically encodes key device physics. A key innovation is the explicit incorporation of parameter such as drain to source voltage (VDS) as an input feature, enhancing the model ability to capture bias dependent variation. The trained model successfully reconstructs full I-V curves and directly extracts critical device metrics including threshold voltage (VTH), subthreshold slope (SS), and peak transconductance (gm). This approach demonstrates that data driven compact models, built from actual characterization data, can achieve high accuracy with minimal training data, providing a powerful tool for rapid device characterization, modelling and circuit level simulation.

Read & Discuss → View Source →

15.

arXiv (CS.CL) 2026-06-17 DOI: arXiv:2606.17168

RepSelect: Robust LLM Unlearning via Representation Selectivity

Authors:

Filip Sondej↗Yushi Yang↗Adam Mahdi↗

Making large language models (LLMs) deeply forget specific knowledge and values without sacrificing general capabilities remains a central challenge in unlearning. However, current methods are easily reversed by fine-tuning or few-shot prompting, suggesting their forgetting is only shallow. We identify the root cause. Existing methods target representations shared with both the retain set and the subspace recovered by a fine-tuning attacker, making unlearning both disruptive to general capabilities and easy to reverse. We propose RepSelect (Representation Selectivity), isolates forget-set-specific representations by collapsing top principal components of weight gradients before each update, leaving general capabilities intact while limiting what fine-tuning can recover. We evaluate across two forget categories, biohazardous knowledge and abusive tendencies, and four model families spanning dense and Mixture-of-Experts architectures (Llama 3, Qwen 3.5, Gemma 4 E4B, DeepSeek V2 Lite). Compared to five popular baselines (GradDiff, NPO, SimNPO, RMU, UNDIAL), RepSelect achieves a 4-50x larger reduction in post-relearning answer accuracy than the strongest baseline, and is near-perfectly robust to few-shot prompting attacks. Targeting selective representations is thus an important step towards deep and robust LLM forgetting.

Read & Discuss → View Source →

16.

arXiv (CS.LG) 2026-06-15 DOI: arXiv:2606.14116

DTVEM-RE: A Hierarchical Random-Effects Extension of the Differential Time-Varying Effect Model for Person-Specific Multi-Lag Estimation in Intensive Longitudinal Data

Authors:

Amartya Bhattacharya↗

arXiv:2606.14116v1 Announce Type: new Abstract: The Differential Time-Varying Effect Model (DTVEM) of Jacobson et al. (2019) is a popular tool for finding the best time lag in intensive longitudinal data, but it assumes everyone shares the same lag structure. The original authors named fixing this as future work, and it clashes with the premise of modern clinical research, which is that people differ. We present DTVEM-RE, an extension that lets each person have their own lag coefficients, with two versions of the confirmatory step: a discrete-time hierarchical Bayesian VAR in Stan, which pools across people and gives calibrated uncertainty, and a continuous-time per-person Ornstein-Uhlenbeck model in ctsem, which handles unevenly spaced beeps directly. We report four results. A simulation shows the Bayesian version recovers the between-person spread tau_a with bias below 0.01 and coverage of 90 to 93 percent. On the Fisher et al. (2017) EMA dataset (N=40), person-specific lag-1 effects vary by an order of magnitude across three mood items, the Bayesian and GAMM estimates agree closely (r=0.87 to 0.92), and DTVEM-RE gives the best one-step-ahead prediction among four discrete-time methods. A multi-lag version shows all nine tau_k values have credible intervals excluding zero, and the lag where people differ most changes across items, something lag-1-only methods like mlVAR cannot detect. Finally, the two versions agree almost exactly on person-specific lag-1 estimates (r >= 0.995), differing only as shrinkage predicts. DTVEM-RE is, to our knowledge, the first person-specific implementation of DTVEM-style lag detection, and it contains standard DTVEM as a special case.

Read & Discuss → View Source →

17.

arXiv (CS.CL) 2026-06-11 DOI: arXiv:2510.16152

Mapping Scientific Literature with Large Language Models and Topic Modeling

Authors:

Mason Smetana↗Lev Khazanovich↗

Scientific literature is increasingly fragmented by disciplinary boundaries, specialized terminology, and potentially sparse keyword systems, making it difficult to capture the evolving structure of modern science. This study introduces a large language model (LLM)-driven framework for mapping scientific literature from a topic modeling perspective. The approach is demonstrated on a 20-year corpus of more than 1,500 engineering-related articles published in the Proceedings of the National Academy of Sciences (PNAS). A two-stage classification pipeline first assigns a primary thematic category to each article based on its abstract, followed by full-text analysis to identify secondary classifications that reveal latent cross-topic connections within the corpus. Unlike conventional topic models, the LLM-based framework produces semantically interpretable topics while maintaining strong quantitative performance. Comparative evaluation against established topic modeling methods shows higher topic diversity and lower overlap with competitive coherence metrics. Manual validation on a randomly sampled subset of abstracts yields an accuracy of 75.9%. Additional traditional natural language processing analyses confirm that the generated topics correspond to meaningful linguistic patterns in the corpus. A bipartite network linking primary and secondary classifications further reveals implicit thematic relationships that are not readily observable through abstracts or keyword systems alone. The findings indicate that the framework independently recovers much of the journal's editorial dual-classification structure without prior knowledge of its schema. Overall, the proposed approach offers a powerful tool for mapping science and identifying emerging cross-topic connections in research.

Read & Discuss → View Source →

18.

arXiv (CS.CV) 2026-06-17 DOI: arXiv:2510.19255

Advances in 4D Representation: Geometry, Motion, and Interaction

Authors:

Mingrui Zhao↗Sauradip Nag↗Kai Wang↗Aditya Vora↗Guangda Ji↗Peter Chun↗Ali Mahdavi-Amiri↗Hao Zhang↗

We present a survey on 4D generation and reconstruction, a fast-evolving subfield of computer graphics whose developments have been propelled by recent advances in neural fields, geometric and motion deep learning, as well as 3D generative artificial intelligence (GenAI). While our survey is not the first of its kind, we build our coverage of the domain from a unique and distinctive perspective of 4D representations, to model 3D geometry evolving over time while exhibiting motion and interaction. Specifically, instead of offering an exhaustive enumeration of many works, we take a more selective approach by focusing on representative works to highlight both the desirable properties and ensuing challenges of each representation under different computation, application, and data scenarios. The main take-away message we aim to convey to the readers is on how to select and then customize the appropriate 4D representations for their tasks. Organizationally, we separate the 4D representations based on three key pillars: geometry, motion, and interaction. Our discourse will not only encompass the most popular representations of today, such as neural radiance fields (NeRFs) and 3D Gaussian Splatting (3DGS), but also bring attention to relatively under-explored representations in the 4D context, such as structured models and long-range motions. Throughout our survey, we will reprise the role of large language models (LLMs) and video foundational models (VFMs) in a variety of 4D applications, while steering our discussion towards their current limitations and how they can be addressed. We also provide a dedicated coverage on what 4D datasets are currently available, as well as what is lacking, in driving the subfield forward. Project page:https://mingrui-zhao.github.io/4DRep-GMI/

Read & Discuss → View Source →

19.

arXiv (CS.CL) 2026-06-24 DOI: arXiv:2605.30852

Speculative Pipeline Decoding: Higher-Accruacy and Zero-Bubble Speculation via Pipeline Parallelism

Authors:

Yijiong Yu↗Huazheng Wang↗Shuai Yuan↗Ruilong Ren↗Ji Pei↗

Speculative Decoding (SD) accelerates low-concurrency LLM inference by employing a draft-then-verify paradigm. However, mainstream methods typically rely on multi-token prediction, which introduces escalating prediction difficulty and serial drafting latency. To address these, we propose Speculative Pipeline Decoding (SPD), a groundbreaking framework that unlocks the true potential of pipeline parallelism. By partitioning the target LLM into $n$ pipeline stages, SPD allows LLM to process $n$ tokens within single sequence in parallel to accelerate decoding. To continuous fill the pipeline in single sequence decoding, a speculation module aggregates intermediate features across different pipeline depths to predict the next token, executing strictly in parallel with the target model's pipeline step, to realize bounded difficulty, higher acceptance rates, and zero latency bubbles. Our experiments demonstrate that SPD achieves significantly higher theoretical and wall-clock speedup compared to mainstream baselines at moderate pipeline depth, though more aggressive settings require further improvement. Our code is available at https://github.com/yuyijiong/speculative_pipeline_decoding

Read & Discuss → View Source →

20.

arXiv (CS.LG) 2026-06-15 DOI: arXiv:2601.11626

Concatenated Matrix SVD: Compression Bounds, Incremental Approximation, and Error-Constrained Clustering

Authors:

Maksym Shamrai↗

arXiv:2601.11626v2 Announce Type: replace-cross Abstract: Large collections of matrices arise throughout modern machine learning, signal processing, and scientific computing, where they are commonly compressed by concatenation followed by truncated singular value decomposition (SVD). This strategy enables parameter sharing and efficient reconstruction and has been widely adopted across domains ranging from multi-view learning and signal processing to neural network compression. However, it leaves a fundamental question unanswered: which matrices can be safely concatenated and compressed together under explicit reconstruction error constraints? Existing approaches rely on heuristic or architecture-specific grouping and provide no principled guarantees on the resulting SVD approximation error. In the present work, we introduce a theory-driven framework for compression-aware clustering of matrices under SVD compression constraints. Our analysis establishes new spectral bounds for horizontally concatenated matrices, deriving global upper bounds on the optimal rank-$r$ SVD reconstruction error from lower bounds on singular value growth. The first bound follows from Weyl-type monotonicity under blockwise extensions, while the second leverages singular values of incremental residuals to yield tighter, per-block guarantees. We further develop an efficient approximate estimator based on incremental truncated SVD that tracks dominant singular values without forming the full concatenated matrix. Therefore, we propose three clustering algorithms that merge matrices only when their predicted joint SVD compression error remains below a user-specified threshold. The algorithms span a trade-off between speed, provable accuracy, and scalability, enabling compression-aware clustering with explicit error control.

Read & Discuss → View Source →

21.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2605.00591

Intrinsic Gradient Suppression for Label-Noise Prompt Tuning in Vision-Language Models

Authors:

Jiayu Li↗Jiaxin Qi↗Sheng Zhou↗Jiaqiang Huang↗Xiansheng Hua↗

Contrastive vision-language models like CLIP exhibit remarkable zero-shot generalization. However, prompt tuning remains highly sensitive to label noise, as mislabeled samples generate disproportionately large gradients that can overwhelm pre-trained priors. We argue that because CLIP already provides a near-optimal initialization, adaptation should be inherently conservative, particularly against the extreme gradient updates common in noisy settings. To this end, we propose Double-Softmax Prompt Tuning (DSPT), a hyperparameter-free method for intrinsic gradient suppression. By applying a sequential probabilistic normalization, DSPT induces a self-adaptive saturation zone that suppresses gradients from high-error noisy samples while maintaining informative updates. We also provide both theoretical analysis and empirical evidence about how this mechanism achieves adaptive suppression. This design transforms ``gradient vanishing'', traditionally a training bottleneck, into a principled noise-filtering shield for label-noise prompt tuning. Extensive experiments confirm that this simple, drop-in design achieves state-of-the-art robustness across various noisy benchmarks, outperforming methods with complex architectures and handcrafted hyperparameters.

Read & Discuss → View Source →

22.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2606.16601

DifferAD-R1: A Difference-Guided IndustrialAnomaly Localization with Multimodal LargeLanguage Models

Authors:

Dingrong Wang↗Xian Tao↗Zhen Qu↗Hengliang Luo↗Xinyi Gong↗Fei Shen↗Zhengtao Zhang↗Guiguang Ding↗

Industrial anomaly localization aims to accurately identify and localize abnormal regions in industrial products, addressing the critical challenge of detecting unseen defect categories in real-world scenarios. Traditional closed-set methods often suffer from poor cross-scenario generalization, while existingMultimodal Large Language Model (MLLM)-based approachesface two core limitations: they either adopt QA-style paradigmsmisaligned with the practical demands of localization, or relyon standard optimization techniques such as Group RelativePolicy Optimization (GRPO), which fails to deliver effectivelearning signals for subtle defects. To tackle these issues, thispaper proposes DifferAD-R1, an MLLM-augmented reinforcement learning framework tailored for industrial anomaly localization. We design a Difference-Guided dual-image paradigm,which reformulates the localization task as a one-shot difference grounding problem to effectively explore cross-scenarioanomalies. A Dual-Consistency Localization Reward is developedfor hard-to-detect anomalies, enhancing optimization stabilityand robustness. Additionally, we integrate a difficulty-awarestrategy with adaptive reweighting and group-wise resamplingto prioritize learning on challenging instances. To facilitateevaluations in real-world industrial settings, we construct theAD-DualDiff dataset, comprising 13K paired images across 20categories. Experimental results demonstrate that DifferADR1 significantly outperforms existing baselines and achievescompetitive performance compared to large-scale models likeQwen3-VL (235B parameters). Our code is publicly availableat: https://github.com/Rong2026/work-1.

Read & Discuss → View Source →

23.

arXiv (CS.CL) 2026-06-16 DOI: arXiv:2606.16934

Exploring Extrinsic and Intrinsic Properties for Effective Reasoning with Code Interpreter

Authors:

Patomporn Payoungkhamdee↗Napat Laosaengpha↗Jenta Wonglertsakul↗Pittawat Taveekitworachai↗Pume Tuchinda↗Panjapong Poobanchuen↗Ekapol Chuangsuwanich↗Can Udomcharoenchaikit↗Samuel Cahyawijaya↗Peerat Limkonchotiwat↗Sarana Nutanong↗

Reasoning with a Code Interpreter (CI) has emerged as an effective paradigm for enhancing the reasoning capabilities of large language models (LLMs) through executable computation and iterative verification. Despite its growing adoption, the behavioral properties underlying effective code reasoning remain largely underexplored. In this work, we investigate code reasoning from two distinct perspectives inspired by prior studies of natural language reasoning: extrinsic properties, represented by crucial tokens, and intrinsic properties, represented by code-specific cognitive behaviors. Across multiple LLMs, we find that stronger CI reasoning models consistently exhibit a higher prevalence of crucial tokens and cognitive behaviors, particularly verification, backtracking, and backward chaining. Building on these observations, we examine how these properties can be leveraged during both inference and training. At inference time, appending code-specific crucial tokens improves performance on several reasoning capabilities, including mathematical, ordering, and optimization, while yielding limited benefits elsewhere. At training time, augmenting a state-of-the-art framework with code-specific cognitive behaviors improves supervised fine-tuning and reinforcement learning performance in two of three evaluated models. Further analysis shows that these behaviors reduce overthinking in incorrect responses and improve token efficiency, while also revealing factors that limit gains in a certain model. Our findings provide the first systematic characterization of effective reasoning with CI and demonstrate both the potential and limitations of leveraging key properties to improve CI-based reasoning.

Read & Discuss → View Source →

24.

arXiv (CS.LG) 2026-06-16 DOI: arXiv:2601.22642

Pushing the Boundaries of Natural Reasoning: Interleaved Bonus from Formal-Logic Verification

Authors:

Chuxue Cao↗Jinluan Yang↗Haoran Li↗Kunhao Pan↗Zijian Zhao↗Zhengyu Chen↗Yuchen Tian↗Lijun Wu↗Conghui He↗Sirui Han↗Yike Guo↗

arXiv:2601.22642v2 Announce Type: replace Abstract: Large Language Models (LLMs) show remarkable capabilities, yet their stochastic next-token prediction creates logical inconsistencies and reward hacking that formal symbolic systems avoid. To bridge this gap, we introduce a formal logic verification-guided framework that dynamically interleaves formal symbolic verification with the natural language generation process, providing real-time feedback to detect and rectify errors as they occur. Distinguished from previous neuro-symbolic methods limited by passive post-hoc validation, our approach actively penalizes intermediate fallacies during the reasoning chain. We operationalize this framework via a novel two-stage training pipeline that synergizes formal logic verification-guided supervised fine-tuning and policy optimization. Extensive evaluation on six benchmarks spanning mathematical, logical, and general reasoning demonstrates that our 7B and 14B models outperform state-of-the-art baselines by average margins of 10.4% and 14.2%, respectively. These results validate that formal verification can serve as a scalable mechanism to significantly push the performance boundaries of advanced LLM reasoning.

Read & Discuss → View Source →

25.

arXiv (quant-ph) 2026-06-24 DOI: arXiv:2510.12790

Thermodynamics of quantum processes: An operational framework for free energy and reversible athermality

Authors:

Himanshu Badhani↗Dhanuja G. S↗Siddhartha Das↗

arXiv:2510.12790v4 Announce Type: replace Abstract: We explore the thermodynamics of quantum processes (quantum channels) by axiomatically introducing the free energy for channels, defined via the quantum relative entropy with an absolutely thermal channel whose fixed output is in equilibrium with a thermal reservoir. This definition finds strong support through its operational interpretations in designated quantum information and thermodynamic tasks. We construct a resource theory of athermality for quantum processes, where free operations are Gibbs preserving superchannels and golden units are unitary channels with respect to absolutely thermal channel having fully degenerate output Hamiltonian. We exactly characterize the one-shot distillation and formation of quantum channels using hypothesis-testing and max-relative entropy with respect to the absolutely thermal channel. These rates converge asymptotically to the channel free energy (up to a multiplicative factor of half the inverse temperature), establishing its operational meaning and proving the asymptotic reversibility of the athermality. We show the direct relation between the resource theory of athermality and quantum information tasks such as private randomness and purity distillation, and thermodynamic tasks of erasure and work extraction. Our work connects the core thermodynamic concepts of free energy, energy, entropy, and maximal extractable work of quantum processes to their information processing capabilities.

Read & Discuss → View Source →