Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
medRxiv (Medicine) 2026-06-18

Urinary Creatine Riboside Complements PSA to Improve Disease Detection in the Diagnostic Gray Zone of Prostate Cancer

Circulating prostate-specific antigen (PSA) discriminates poorly in the diagnostic gray zone (3.0-9.99 ng/mL), where ~75% of biopsies yield no clinically significant prostate cancer (PCa). We evaluated whether urinary creatine riboside (CR), a tumor-derived metabolite excreted through the prostatic urethra, complements PSA for gray-zone detection and independently predicts prostate-cancer-specific mortality (PCSM). In the NCI-Maryland PCa Case-Control Study (951 cases, 962 controls; 47.6% African American men; median follow-up 11.5 years), urinary CR was quantified by UPLC-MS/MS. Within the PSA gray zone (n = 668), urinary CR was complementary to PSA, with markedly higher single-marker discrimination than PSA (AUC 0.93, 95% CI 0.88-0.98 vs 0.77, 0.66-0.89) and additive when combined ({Delta}AUC +0.17, p < 0.001; 91.4% sensitivity at 80% specificity). After adjustment for 11 clinical and sociodemographic covariates, urinary CR independently predicted PCSM complementary to PSA (Fine-Gray SHR 1.72, 1.35-2.19 for CR; 1.35, 1.08-1.68 for PSA; Harrell's C 0.85 for CR + PSA vs 0.77 for PSA alone), with strongest signal in African American men (SHR 2.43, 1.57-3.75 for CR). We conclude that urinary CR is a candidate non-invasive biomarker complementary to PSA - improving gray-zone triage and predicting PCSM; prospective validation in biopsy-referred cohorts is warranted.

02.
arXiv (quant-ph) 2026-06-12

Quantum Logic Codes: Complete Transversal Logical Clifford Instruction Sets for High-Rate Stabilizer Quantum Error Correcting Codes

Authors:

arXiv:2606.13521v1 Announce Type: new Abstract: We study the structure and transversal logical capabilities of stabilizer quantum error correcting codes. Among our results, we identify universal lower bounds on circuit depth to generate a full logical Clifford algebra, and develop novel constructions of logical transversal gates including a new depth-one transversal phase $\mathrm{\overline{S}}$ gate in the rotated surface code and a depth-one intra-block $\mathrm{\overline{CZ}}$ gate in the 2D-toric code that generalizes to all odd distances and all lengths $L\ge3$, respectively. Finally, we construct a high-rate non-LDPC CSS code family with parameters $[[n,\sqrt{n},\Theta({n^{\beta}})]]$ where $\beta \approx 0.2823$ in one demonstrated case, that provably possesses a constant-depth complete 2-local transversal logical Clifford basis instruction set architecture (ISA) composed of all individually targeted $\mathrm{\overline{S}}$, $\mathrm{\overline{SHS}} = \sqrt{X}$, and $\mathrm{\overline{CZ}}$ gates. This ISA is depth-one for certain subfamilies that we design and generally constant-depth under certain conditions. The code family is built from a small code with parameters $[[n_0, 2, d_0]]$, and is tunable in the standard way: it tiles out to form utility-scale logical qubit counts, and it scales up through concatenation to achieve higher distances and error suppression. We show that this construction preserves the depth-one complete transversal logical Clifford basis ISA when composed with these commuting construction actions, inheriting structure from the core codes so that at scale the complete logical Clifford basis ISA remains depth-one up to depth-two addressable operations between tiled cores. We call these Quantum Logic Codes.

03.
arXiv (CS.CV) 2026-06-18

SAMA: Semantic Anchor-aligned Augmentation for Unified Low-Resource Multimodal Information Extraction

Multimodal Information Extraction (MIE)-covering tasks such as Multimodal Named Entity Recognition (MNER), Relation Extraction (MRE), and Event Extraction (MEE)-is essential for understanding multimedia content but remains constrained by severe data scarcity. Although data augmentation is a promising remedy, existing approaches are impeded by coarse cross-modal alignment and fragmented, task-specific designs that fail to exploit shared semantic knowledge. To overcome these limitations, we introduce Semantic Anchor-aligned Multimodal Augmentation (SAMA), a unified framework for generating high-fidelity, task-aware synthetic data. SAMA constructs structured semantic anchors from ground-truth labels to guide a Collaborative Multi-Experts Multimodal Large Language Model (CME-MLLM), which integrates a Universal Adapter for shared semantics with Task-Specific Adapters to produce diverse yet constraint-compliant textual samples. For image synthesis, SAMA employs an Anchor-Preserving Diffusion mechanism that uses anchor-weighted prompts and latent conditioning to maintain critical semantic anchors while diversifying visual contexts. To eliminate the need for manual verification, SAMA further introduces a Dual-Constraint Filtering module that selects synthetic samples based on both cross-modal consistency and anchor fidelity. Extensive experiments across benchmark datasets for MNER, MRE, and MEE demonstrate that SAMA consistently outperforms state-of-the-art augmentation baselines under both fully supervised and low-resource settings, underscoring its versatility, robustness, and effectiveness.

04.
arXiv (CS.AI) 2026-06-11

Steering Where to Listen: Instruction-Based Activation Steering Redirects Temporal Attention in Large Audio-Language Models

arXiv:2606.11400v1 Announce Type: cross Abstract: Large Audio-Language Models (LALMs) excel at audio understanding but expose little about where in an audio signal they attend. We introduce instruction-based vector steering, which constructs a steering vector by contrasting activations from differently instructed prompts while keeping the audio fixed. Through a systematic probe of LALM attention, we find that - unlike standard prompting or audio-based steering - this intervention significantly redistributes the temporal attention allocated to audio tokens, concentrating it on acoustically relevant regions. We then show that this attention shift is behaviorally meaningful: in a controlled three-event setting, reading out the temporal position of maximal steering-induced attention change recovers the location of a queried sound event without any training, attaining 60.87% and 68.72% overlap with ground-truth intervals on Qwen2-Audio and Audio Flamingo 3, far above direct prompting (31.84%, 46.75%) and random baselines (27.74%). Our results characterize a mechanistic property of instruction-based steering in LALMs and provide a training-free probe for the latent temporal structure these models encode.

05.
arXiv (CS.CL) 2026-06-12

Low-Latency Real-Time Audio Game Commentary System via LLM-Based Parallel Text Generation

We present a low-latency real-time audio game commentary system that generates spoken commentary directly from live gameplay video. In this end-to-end setting, a key bottleneck is accumulated waiting time; conventional pipelines capture frames, generate text, and synthesize speech sequentially for each utterance, and do not request the next generation until speech playback has completed. This strict sequentiality causes long and unnatural silence between utterances. To address this latency bottleneck, our system runs text generation in parallel with speech playback and buffers multiple candidate utterances ahead of time, enabling immediate synthesis at playback boundaries. Experiments on fast-paced game videos show that our parallel design reduces the mean inter-utterance silence from 9.6 seconds to 0.3 seconds compared to sequential baselines. It also improves similarity to professional speaking–silence timing patterns by over 40 %, and a user study with 120 experienced game players confirms significantly improved perceived speaking rhythm. Our demo video is available at: https://youtu.be/pmrRUlvav8M.

06.
bioRxiv (Bioinfo) 2026-06-24

Development of Deep-Learning Models that Predict Quantitative Protein-Ligand Interac-tions in Glycobiology as a part of a Capstone Course

Glycans coat the surface of all cells, and every glycan is recognised by specific glycan-binding pro-teins (GBPs). There are no general tools that can accurately estimate the binding strength between glycan and GBP from the amino acid sequence of the GBP and the molecular structure of the glycan, represented as SMILES string. We describe models for predicting such binding strengths developed as a part of a Capstone Course at the University of Alberta. The models are trained on a dataset that combines BindingDB, a published database of small-molecule protein interactions, and data from glycan arrays measured by Consortium of Functional Glycomics (CFG). In this hybrid dataset of protein-ligand interactions the ligands are both glycans from CFG and small molecules from BindingDB; similarly, proteins include GBP and proteins from BindingDB. Three models are presented (i) ProMax which fuses ESM-2, MolFormer, and MolCLR features; (ii) APEX which constrains learning to a predetermined form, a physical model of binding; (iii) UltraMax adds inter-atomic distances for the ligands. To address the dataset's severe long-tail distribution, the models employ tail-aware losses for rare high-binding instances. Trained and evaluated on approximately one million protein–ligand pairs using hold-out splits for unseen molecules, the three models provide a unified framework for quantitative glycan-protein binding prediction. We observed that learning glycan-protein binding is harder than the similar task of learning small-molecule-protein interactions. Simple mirror-inversion tests led us to postulate that insufficient use of chiral features is an important source of difficulty in learning these interactions.

07.
arXiv (quant-ph) 2026-06-11

On-Chip Quantum Randomness Amplification

arXiv:2606.12173v1 Announce Type: new Abstract: Randomness amplification, the task of extracting uniform private bits from biased seeds that may be partly known by a malicious third party, is of central importance in cryptography. The highest security in this task is provided by a class of quantum protocols known as device-independent, which however are challenging to integrate into scalable devices. Semi-device-independent (SDI) protocols are a promising alternative that guarantees security under few natural assumptions, such as bounds on the amount of energy used by the devices. Here, we provide the first demonstration of SDI randomness amplification on an integrated silicon photonic chip, achieving a throughput rate of 20 Mbps suitable for practical applications. This rate is achieved through a novel technique for SDI entropy certification, which delivers strictly tighter von Neumann entropy bounds compared to existing methods and remains valid even if the preparation and measurement devices share quantum correlations. Overall, the methods developed in this work enable the integration of SDI technology into portable telecom devices, opening up a new generation of quantum cryptographic hardware.

08.
arXiv (CS.LG) 2026-06-18

PACT: Preserving Anchored Cores in Task-vectors for Model Merging

arXiv:2606.18627v1 Announce Type: new Abstract: Model merging has emerged as a training-free alternative to multi-task learning, aiming to combine multiple task-specific fine-tuned models into a single multi-task model. Most existing model merging approaches follow the Task Arithmetic paradigm, which decomposes fine-tuned weights into pre-trained parameters and task vectors, and performs merging exclusively in the task-vector space. The effectiveness of this paradigm implicitly relies on the assumption that task-specific knowledge is encoded solely within task vectors. We argue that this assumption generally does not hold due to the intrinsic task preferences of pre-trained models. Specifically, we identify Load-Bearing Wall (LBW) dimensions, namely some task-critical knowledge that remains embedded in the pre-trained weights rather than being fully transferred into task vectors. We characterize LBW dimensions from both scalar-weight and subspace perspectives, thereby covering the major paradigms of existing model merging methods. Our analysis reveals that, by ignoring LBW dimensions, task-vector-based approaches fail to fully resolve task conflicts and may inadvertently damage task-specific knowledge encoded in the pre-trained model, leading to degradation. To address this issue, we propose PACT, which preserves the anchored task-specific cores (i.e., LBW dimensions) within task vectors by aligning their orthogonal complements with the subspace of the pre-trained weights. These aligned subspace components are then removed from the task vectors before applying existing model merging algorithms. Furthermore, we develop an efficient variant based on randomized SVD to improve scalability. PACT can be seamlessly integrated with existing methods. Extensive experiments across multiple benchmarks demonstrate that PACT consistently enhances mainstream model merging approaches and establishes new state-of-the-art performance.

09.
arXiv (CS.LG) 2026-06-16

An Integrable Token Mixing Layer from the Generalized Yang Baxter Equation

arXiv:2606.15085v1 Announce Type: new Abstract: The YB Mixer is a sequence token mixing layer derived from free fermion and generalized Yang Baxter structures. It applies a core principle from integrable systems where a local algebraic constraint guarantees global computational stability. By using the Ising exchange algebra the mixer creates a free fermionic structure that acts as an exactly norm preserving orthogonal map. This algebra also produces commuting transfer matrices which allow inference to be order free and adaptable to any variable budget. To ensure the model can generalize to longer sequence lengths it uses a spectral circulant generator. This generator maintains the crucial orthogonal and commuting properties of the system. The result is a highly stable and mathematically grounded architecture for sequence processing.

10.
arXiv (CS.AI) 2026-06-18

Better Adherence, Richer Context: A Field Evaluation of LLM-Powered Conversational Voice Diaries for Sleep

arXiv:2606.18596v1 Announce Type: cross Abstract: Sleep diaries are central to behavioral sleep medicine and cognitive behavioral therapy for insomnia, yet daily completion is difficult to sustain, and static forms often provide limited context for interpreting night-to-night sleep variation. We designed an LLM-powered conversational voice diary that delivers clinically grounded morning and evening sleep diary questions through proactive smart-speaker prompts, structured conversational intake, and adaptive follow-up dialogue. We evaluated the system in a four-week between-subjects field study with 30 university students, comparing it with a text-based mobile diary using matched diary items, reporting windows, and reminder intervals. Compared with the text-based diary, the conversational voice diary showed higher adherence and elicited more detailed contextual self-report about routines, stressors, environmental conditions, and other sleep-related factors. Participants also described the voice diary as easier to integrate into daily routines, despite longer perceived completion time. However, voice-based conversational intake produced lower completeness for some structured diary fields, revealing a trade-off between expressive richness and structured precision. These findings show both the promise and the challenge of using LLM-powered conversational voice assistants for longitudinal health self-report.

11.
arXiv (CS.CV) 2026-06-12

Ex-Omni: Enabling 3D Facial Animation Generation for Omni-modal Large Language Models

Omni-modal large language models (OLLMs) aim to unify multimodal understanding and generation, yet extending them to jointly produce speech and 3D facial animation remains largely unexplored despite its importance for natural human-computer interaction. A key challenge is the mismatch between the discrete semantic reasoning of LLMs and the dense temporal dynamics required for 3D facial motion. We propose Expressive Omni (Ex-Omni), an open-source model that augments OLLMs with native speech-accompanied 3D facial animation. Ex-Omni decouples semantic reasoning from temporal generation through a blendshape-aware speech unit generator and a blendshape decoder, where speech units provide temporal scaffolding and hidden speech representations carry facially relevant cues. We further introduce a unified token-as-query gated fusion (TQGF) mechanism for controlled semantic injection, as well as InstructS2SF-1200K, a dataset consisting of 1200K samples for pre-training. Extensive experiments show that Ex-Omni maintains competitive speech understanding and generation ability while achieving better audio-visual synchronization and lower face-generation latency than cascaded pipelines.

12.
arXiv (CS.AI) 2026-06-25

Uncertainty-aware reinforcement learning for chemical language models

arXiv:2606.24990v1 Announce Type: cross Abstract: Reinforcement Learning (RL) has become a powerful paradigm for de novo molecular design, enabling Chemical Language Models (CLMs) to navigate and explore the chemical space while optimizing specific desired properties. However, the existing RL frameworks treat all scoring functions as deterministic oracles, neglecting the inherent uncertainty attached to the predictions of the different molecular properties. This can lead to the exploration of highly-uncertain regions of the chemical space, focusing on the generation of highly scored molecules which are poorly supported by the training data. This can destabilize the optimization process, yielding predictions that are far from their true values. We propose and compare two complementary ways of incorporating predictive uncertainty into RL. In the first one, uncertainty is treated as an additional optimization objective and incorporated along with the rest of the scoring functions, allowing the policy to trade off exploitation against reliability. Secondly, uncertainty is used to modulate policy updates, reducing the influence of molecules whose properties lie far outside the scoring function confidence domain. Both approaches were evaluated across three different settings: (i) a controlled model system, in which the prediction error is modeled as a Gaussian distribution, with a variance proportional to the distance to the training data; and two real-world tasks, making use of (ii) ChemProp models and (iii) a Conformal Prediction wrapper applied to a Random forest classifier. We show that uncertainty-aware RL enables CLMs to explore chemical space more robustly by favoring lower-uncertainty regions. This leads to more reliable hit discovery without compromising molecular score, increasing the true hit rate by 0.25 (from 0.5 to 0.75), and nearly doubling the total number of true hits.

13.
arXiv (CS.CV) 2026-06-24

GENA3D: Generative Amodal 3D Modeling by Bridging 2D Priors and 3D Coherence

Generating complete 3D objects under partial occlusions (i.e., amodal scenarios) is a practically important yet challenging problem, as large portions of object geometry are unobserved in real-world scenarios. Existing approaches either operate directly in 3D, which ensures geometric consistency but often lacks generative expressiveness, or rely on 2D amodal completion, which provides strong appearance priors but does not guarantee reliable 3D structure. This raises a key question: how can we achieve both generative plausibility and geometric coherence in amodal 3D modeling? To answer this question, we introduce GENA3D (GENarative Amodal 3D), a framework that integrates learned 2D generative priors with explicit 3D geometric reasoning within a conditional 3D generation paradigm. The 2D priors enable the model to plausibly infer diverse occluded content, while the 3D representation enforces multi-view consistency and spatial validity. Our design incorporates a novel View-Wise Cross-Attention for multi-view alignment and a Stereo-Conditioned Cross-Attention to anchor generative predictions in 3D relationships. By combining generative imagination with structural constraints, GENA3D generates complete and coherent 3D objects from limited observations without sacrificing geometric fidelity. Experiments demonstrate that our method outperforms existing approaches in both synthetic and real-world amodal scenarios, highlighting the effectiveness of bridging 2D priors and 3D coherence in generating plausible and geometrically consistent 3D structures in complex environments.

14.
arXiv (CS.CV) 2026-06-17

MaineCoon: Pursuing A Real-Time Audio-Visual Social World Model

As an increasing majority of global video content is consumed on social platforms for interactive social purposes, video generation models built for social worlds are important but largely overlooked by previous studies. In this work, we define the position of social world models and build a prototype model as the first step towards this goal. While previous world models successfully simulate physical environments or gaming world exploration, they remain fundamentally detached from human-centric social dynamics. To bridge this gap as the first step to social world models, we present MaineCoon, the first real-time audio-visual autoregressive model that has 22B parameters and is capable of real-time streaming generation and sub-second interaction, with a record-breaking frame rate of up to 47.5 FPS, on a single GPU. To the best of our knowledge, MaineCoon is also the first real-time audio-visual generation model specifically optimized for social-interactive applications. To enable efficient and stable training, we introduce several novel techniques into MaineCoon, including self-resampling, cross-modal representation alignment, domain-aware preference optimization, and reinforced online-policy distillation (ROPD). We also design the first agentic streaming inference framework that supports thousand-second-scale or even longer generation while mitigating drift with agentic cache management and prompt planing. These innovations significantly accelerate training while optimizing real-time inference performance. We believe this work not only sets a new state-of-the-art (SOTA) performance benchmark for high-quality, low-latency, and long-horizon audio-visual autoregressive models, but also points out the paradigm shift desired for next-generation AI-native social platforms.

15.
arXiv (CS.LG) 2026-06-17

Rethinking Dataset Distillation for Classification: Do Distilled Sets Outperform Coresets?

arXiv:2606.18209v1 Announce Type: new Abstract: Dataset distillation (DD) has emerged as a prominent approach in data centric machine learning, aiming to synthesize compact training sets for efficient training by compressing the information in large datasets into a small number of synthetic samples. However, DD methods are often evaluated under inconsistent evaluation protocols, ranging from standard ERM to single/multi-teacher supervision, making it difficult to isolate the effectiveness of distilled data from evaluation. Moreover, many prior methods claim that DD outperforms data pruning approaches such as coreset selection (CS), based on the assumption that restricting condensed datasets to subsets of real samples fundamentally limits their expressiveness. In this work, we critically evaluate DD methods through large-scale experiments using standardized datasets and evaluation protocols to assess their intrinsic effectiveness. We benchmark seven state-of-the-art (SOTA) DD methods on ImageNet-1K, ImageNet100, and ImageNette, using three widely adopted training protocols against three CS strategies. Our results show that while some DD methods fail to outperform even simple random subsets, the SOTA DD approaches are comparable to or worse than coresets on large-scale datasets and incur a substantially higher cost for construction. Beyond accuracy, we also evaluate the representativeness, diversity, and quality of condensed sets, and find that coresets consistently achieve better coverage of the original data distribution. These findings highlight the limited practical advantages of current DD methods and show that coresets remain competitive and are often a more computationally efficient alternative for data-centric learning.

16.
arXiv (CS.AI) 2026-06-12

Agentic Large Language Models for Automated Structural Analysis of 3D Frame Systems

arXiv:2606.06525v2 Announce Type: replace-cross Abstract: Large language models (LLMs) have emerged as powerful foundation models with strong reasoning capabilities across domains. Beyond reactive text generation, agentic LLMs enable autonomous workflow execution through modular task decomposition and coordinated tool use. In structural engineering, recent efforts have developed agentic LLMs for automated analysis of plane frames. However, their extension to 3D frames remains underexplored due to challenges in irregular geometric representation, topological consistency, and long-horizon reasoning. This paper proposes an agentic LLM framework for automated structural analysis of 3D frames from natural language inputs. Irregular 3D frames are represented by projection onto a 2D plan, where orthogonal gridlines define spatial coordinates and a matrix of number of stories encodes vertical extrusion of each grid cell. Building on this representation, the framework establishes a multi-agent pipeline: a problem analysis agent parses input into structured JSON; a floor decomposition agent derives the spatial layout of each floor; the 3D geometry is assembled by node, girder, slab, and column agents; support and load agents assign boundary and loading conditions, and code translation agents generate executable SAP2000 script. Evaluated on ten representative 3D frames, the proposed framework achieves an average accuracy of 90% across repeated trials, demonstrating consistent and reliable performance.

17.
arXiv (CS.CL) 2026-06-15

Same-Origin Policy for Agentic Browsers

Agentic browsers integrate autonomous AI agents into web browsers, enabling users to accomplish web tasks through natural-language instructions. The same-origin policy (SOP) is a fundamental browser security mechanism that prevents unauthorized automated cross-origin data flows induced by scripts. However, whether SOP remains effective in agentic browsers is an open question that has not been systematically studied. In this work, we bridge this gap. We first observe that an agentic browser can itself serve as an automated channel for cross-origin data flows, potentially leading to SOP violations. To investigate this phenomenon, we construct SOPBench, a benchmark for evaluating SOP violations in agentic browsers. Our evaluation shows that existing agentic browsers frequently violate SOP, both in benign settings and under attacks. To address this problem, we propose SOPGuard, an SOP enforcement mechanism tailored to agentic browsers. We implement SOPGuard in BrowserOS, an open-source agentic browser. Extensive evaluations demonstrate that SOPGuard effectively enforces SOP while preserving utility and incurring only a small runtime overhead. Our code and data are available at https://github.com/wxl-lxw/BrowserOS-SOPGuard.

18.
arXiv (CS.AI) 2026-06-19

FlowFake: Liquid Networks for Audio Deepfake Detection

arXiv:2606.19579v1 Announce Type: cross Abstract: Audio deepfakes generated by neural text-to-speech and voice-cloning systems threaten speaker verification and public discourse at scale. The core challenge is cross-dataset generalization: detectors trained on one synthesis pipeline collapse on unseen forgeries. We argue that this failure is primarily because of structural synthetic speech artifacts which are multi-timescale trajectory anomalies. Though every existing detector aggregates a fixed-window frame statistics, this misaligns the architecture with the signal. We propose FlowFake, a Liquid Time-Constant (LTC) architecture whose hidden state evolves via a learned ODE, with per-neuron adaptive time constants simultaneously resolving spectral (10ms) and prosodic (2s) cues. At only 34K parameters FlowFake achieves formal BIBO stability and O(dt^4) integration error. On a four-dataset cross domain benchmark (ASVspoof2019-LA, FakeOrReal, InTheWild, MLAAD), FlowFake reaches 75.29% on ASVspoof2019 trained only on FakeOrReal and 79.97% trained only on MLAAD. It outperforms RawGAT-ST and Whisper-DF on every evaluated pair and matching SSL Wav2vec2 (300x larger) at 0.01% of its parameter count. The source code is available on : https://github.com/GhostRider2023/FlowFake

19.
arXiv (CS.AI) 2026-06-15

Capability Minimization as a Safety Primitive: Risk-Aware Causal Gating for Least-Privilege LLM Agents

arXiv:2606.13884v1 Announce Type: new Abstract: Modern decision systems increasingly rely on learned components whose outputs may be confident yet wrong, exposing downstream actions to costly errors. We introduce Risk-Aware Causal Gating (RACG), a framework that decides whether to act on, defer, or abstain from a model's prediction by combining causal effect estimation with calibrated risk control. RACG models the causal pathway from candidate actions to outcomes and gates each decision according to an estimated counterfactual risk rather than raw predictive confidence. To make gating reliable, we derive distribution-free bounds on the probability of acting under high-risk conditions and show how these bounds translate into operating thresholds that satisfy user-specified safety constraints. We further propose an adaptive gating policy that adjusts to distribution shift by monitoring discrepancies between predicted and realized outcomes, tightening the gate when causal assumptions appear violated. Across simulated interventions and real-world decision benchmarks, RACG reduces high-cost errors substantially while preserving most of the utility of an ungated policy, and it outperforms confidence-based and selective-prediction baselines at matched abstention rates. Our results indicate that explicitly separating causal risk from predictive uncertainty yields decision systems that are both safer and more transparent, offering a principled mechanism for trustworthy automation in high-stakes settings.

20.
arXiv (quant-ph) 2026-06-24

Erasure cost of a quantum process: A thermodynamic meaning of the dynamical min-entropy

arXiv:2506.05307v5 Announce Type: replace Abstract: The erasure of information is fundamentally an irreversible logical operation, carrying profound consequences for the energetics of computation and information processing. We investigate the thermodynamic costs associated with erasing (and preparing) quantum processes. Specifically, we analyze an arbitrary bipartite unitary gate acting on logical and ancillary input-output systems, where the ancillary input is always initialized in the ground state. We focus on the adversarial erasure cost of the reduced dynamics - that is, the minimal thermodynamic work cost to erase the logical output of the gate for any logical input, assuming full access to the ancilla but no access to any purifying reference of the logical input state. We determine that this adversarial erasure cost is directly proportional to the negative min-entropy of the reduced dynamics, thereby giving the dynamical min-entropy a clear operational meaning. The dynamical min-entropy can take positive and negative values, depending on the underlying quantum dynamics. The negative value of the erasure cost implies that the extraction of thermodynamic work is possible instead of its consumption during the process. A key foundation of this result is the quantum process decoupling theorem, which quantitatively relates the decoupling ability of a process with its min-entropy. This insight bridges thermodynamics, information theory, and the fundamental limits of quantum computation.

21.
arXiv (CS.CL) 2026-06-19

PASQA: Pitch-Accent-Focused Speech Quality Assessment Model Trained on Synthetic Speech with Accent Errors

Existing mean opinion score (MOS) prediction models typically predict utterance-level naturalness MOS and can be insensitive to localized pitch-accent errors. We propose Pitch-Accent-focused Speech Quality Assessment (PASQA), which explicitly targets pitch-accent correctness. To train our model, we construct a controlled Japanese accent-error dataset by changing accent patterns using an accent-controllable text-to-speech system, and compute a pseudo accent-quality score from the accent-error rate. PASQA builds on self-supervised representations and employs mora-conditioned fusion, ranking loss, an auxiliary accent-error localization task, and speaker-invariant training. Experiments show that conventional models fail to preserve the ordering by accent-error severity, whereas PASQA achieves high ordering accuracy on both seen and unseen speakers. Further, PASQA shows stronger agreement with human accent-correctness judgments. The code is available at https://github.com/lycorp-jp/PASQA.

22.
arXiv (CS.CV) 2026-06-16

Region-Adaptive Sampling for Diffusion Transformers

Diffusion models (DMs) have become the leading choice for generative tasks across diverse domains. However, their reliance on multiple sequential forward passes significantly limits real-time performance. Previous acceleration methods have primarily focused on reducing the number of sampling steps or reusing intermediate results, failing to leverage variations across spatial regions within the image due to the constraints of convolutional U-Net structures. By harnessing the flexibility of Diffusion Transformers (DiTs) in handling variable number of tokens, we introduce RAS, a novel, training-free sampling strategy that dynamically assigns different sampling ratios to regions within an image based on the focus of the DiT model. Our key observation is that during each sampling step, the model concentrates on semantically meaningful regions, and these areas of focus exhibit strong continuity across consecutive steps. Leveraging this insight, RAS updates only the regions currently in focus, while other regions are updated using cached noise from the previous step. The model's focus is determined based on the output from the preceding step, capitalizing on the temporal consistency we observed. We evaluate RAS on Stable Diffusion 3 and Lumina-Next-T2I, achieving speedups up to 2.36x and 2.51x, respectively, with minimal degradation in generation quality. Additionally, a user study reveals that RAS delivers comparable qualities under human evaluation while achieving a 1.6x speedup. Our approach makes a significant step towards more efficient diffusion transformers, enhancing their potential for real-time applications.

23.
arXiv (CS.CV) 2026-06-12

NavWAM: A Navigation World Action Model for Goal-Conditioned Visual Navigation

Goal-conditioned visual navigation requires a robot to act under partial observability by anticipating how its motion will change the future egocentric view and whether that change brings it closer to the goal. Navigation world models provide such visual foresight, but they remain prediction modules that require an external planner to convert predicted futures into closed-loop control. We propose Navigation World Action Model (NavWAM), a diffusion-transformer policy that turns navigation world-model prediction into executable action by representing future observations, goal-progress values, and action chunks in a shared latent sequence. By learning future prediction jointly with the action and value targets that determine closed-loop behavior, NavWAM makes visual foresight directly usable for robot control. We build NavWAM through simulation pretraining and real-robot adaptation, and evaluate it on image-goal navigation against planning-based world models and a representative direct navigation policy. Across offline benchmarks and closed-loop real-robot deployment, NavWAM improves over planning-based world-model baselines in our evaluations while using the default policy mode without CEM-style action search. Project page: https://dachii-azm.github.io/navwam/

24.
arXiv (CS.CV) 2026-06-18

Objective Quality Assessment of Point Clouds Using Multi-scale Implicit Structural Similarity

The unstructured and irregular nature of points poses a significant challenge for accurate point cloud quality assessment (PCQA), particularly in establishing accurate perceptual feature correspondence. To tackle this, we propose the Multi-scale Implicit Structural Similarity Measurement (MS-ISSM). Unlike traditional point-to-point matching, MS-ISSM utilizes radial basis function (RBF) to represent local features continuously, transforming distortion measurement into a comparison of implicit function coefficients. This approach effectively circumvents matching errors inherent in irregular data. Additionally, we propose a ResGrouped-MLP quality assessment network, which robustly maps multi-scale feature differences to perceptual scores. The network architecture departs from traditional flat multi-layer perceptron (MLP) by adopting a grouped encoding strategy integrated with residual blocks and channel-wise attention mechanisms. This hierarchical design allows the model to preserve the distinct physical semantics of luma, chroma, and geometry while adaptively focusing on the most salient distortion features across High, Medium, and Low scales. Experimental results on multiple benchmarks demonstrate that MS-ISSM outperforms state-of-the-art metrics in both reliability and generalization. The source code is available at: https://github.com/ZhangChen2022/MS-ISSM.

25.
arXiv (CS.CV) 2026-06-18

URDF Synthesis from RGB-D Sequences via Differentiable Joint Inference and Energy-Consistent Verification

Authors:

Reconstructing simulation-ready digital twins of articulated objects from sensor observations remains constrained by two persistent gaps: (i) part-level geometric reconstruction is decoupled from kinematic-parameter estimation, and (ii) the recovered models often violate basic dynamic invariants such as energy conservation, leading to drift when the URDF is replayed in physics simulators. We present KinemaForge, a constraint-driven pipeline that jointly infers part-level shape, joint topology, and joint parameters from short RGB-D sequences and validates the result against an energy-consistent verifier built on differentiable rigid-body dynamics. The pipeline introduces three components: a kinematic constraint graph that encodes joint-part incidences as soft edges; a differentiable screw-axis solver that backpropagates from rendered observations through Featherstone's articulated-body algorithm to joint parameters; and an energy residual loss that penalises non-physical free responses of the reconstructed model. Across five PartNet-Mobility categories and an internal RGB-D benchmark, KinemaForge reduces the average joint-axis error from 4.52 degrees to 2.83 degrees (-37.4%) over the strongest geometric baseline (PARIS) and from 5.30 degrees to 2.83 degrees (-46.6%) over the interaction-based Ditto baseline, lowers long-horizon simulation drift by 64% (vs. PARIS) over 50 s rollouts, and yields URDFs whose closed-loop manipulation success rate improves by 14.6 percentage points over Ditto in our preliminary evaluation. Code and reconstruction data will be released upon acceptance.