Paper Plaza - AcademicHub

01.

medRxiv (Medicine) 2026-06-16 DOI: HASH:26dbc55e1b694ceee03bffba6bd73d69

Daily Healthy Eating Index (HEI-2020) scoring reveals diet quality patterns masked by aggregation

Authors:

The Healthy Eating Index (HEI-2020) is conventionally computed by aggregating intake across days before scoring. Digital food logging enables an alternative: scoring each day and averaging daily scores. These methods are not equivalent. The HEI's density-based structure and component caps cause aggregation to inflate adequacy scores when intake is irregular. Using Food & You data, we show daily HEI correlates more strongly with microbiome diversity, and recommend co-reporting both metrics.

Read & Discuss → View Source →

02.

arXiv (CS.CL) 2026-06-17 DOI: arXiv:2606.17634

Prompt Perturbation for Reliable LLM Evaluation over Comparison Graphs

Authors:

Dong Huang ↗Jianbo Sun ↗Pengkun Yang ↗

Evaluating large language models (LLMs) is important for understanding their capabilities, comparing competing systems, and supporting the deployment of reliable models in practice. For open-ended tasks, pairwise evaluation has become a popular paradigm, in which two responses to the same prompt are compared and the resulting judgments are aggregated into an overall ranking. A central challenge of this paradigm is intransitivity: the induced comparison outcomes may fail to support any coherent global ranking. For example, one may observe cyclic preferences such as $A \succ B \succ C \succ A$, or inconsistencies involving ties such as $A \equiv B\equiv C\neq A$. Such contradictions make the resulting leaderboard unstable and challenging to interpret. In this paper, we propose a prompt perturbation framework for improving the consistency of pairwise LLM evaluation. Our approach generates perturbed variants of each prompt, uses the resulting comparison graphs to identify and filter out structurally inconsistent comparison patterns, and then applies standard ranking methods to the filtered comparisons. A key feature of the proposed framework is that graph-level structural consistency is incorporated explicitly into the evaluation pipeline before ranking aggregation. This provides a simple and principled way to reduce cyclic inconsistencies and improve the reliability of LLM rankings.

Read & Discuss → View Source →

03.

bioRxiv (Bioinfo) 2026-06-18 DOI: HASH:7e012ed048276f9225c0f87771fdc98e

Identification of environmental factors and growth stages in the prediction of fibre yield and fibre quality traits in rain-grown cotton

Authors:

Feng ↗Rafter ↗Wilson ↗Li ↗Conaty ↗

Context Understanding how and when environmental conditions influence overall crop performance is crucial for optimising the development of genotypes to a specific breeding target environment. We focused on economically important traits of Australian rain-grown cotton including fibre yield and quality traits, which have not been investigated comprehensively. The aim of the study was to identify relevant environmental factors, and the timing and extent of their impact on rain-grown cotton production. Methods We used a data driven approach to analyse the relationship between ten climate related environmental factors across various plant growth stages and eight fibre yield and quality traits, using a large-scale field dataset of 9,283 records collected over 23 years at 4 locations, with 53 unique year-location combinations. We applied eight complementary statistical models including stepwise, penalised and Bayesian linear regression, regression-tree based ensemble methods and deep learning frameworks to (1) select the most essential environmental covariates affecting rain-grown cotton production, and (2) evaluate the predictive performance of these models. Results The environmental impacts on rain-grown cotton production were trait and growth-stage specific. Number of rainy days and solar radiation were identified as the most influential environmental factors for fibre yield traits, vapour pressure deficit at maximum daily temperature was the most influential factor for majority of fibre quality traits. However, each analysed trait was influenced by multiple environmental factors across multiple growth stages (rather than a single factor or a single growth stage). These influential covariates explained a wide range of variation in the traits, accounting for 5.8% to 68.2%. Using the best-fit random forest model, our findings revealed non-linear relationships between key environmental covariates and the traits. Conclusions Environmental factors at different rain-grown cotton growth stages are key determinants for the performance of end-of-season fibre yield and fibre quality parameters. These findings highlight the need to account for environment conditions when developing cotton varieties optimised for rain-grown production systems. Potential strategies are proposed whereby these key environmental factors can be used to increase the rate of genetic gain in rain-grown cotton production systems. Implications The results of this study will be crucial for future genetic evaluations and analyses of genotype-by-environment interaction effects in rain-grown cotton, which must account for the influence of the environment on plant performance. Furthermore, these methods can be applied to other species to identify critical growth stages and environmental factors which most influence crop performance.

Read & Discuss → View Source →

04.

bioRxiv (Bioinfo) 2026-06-11 DOI: HASH:7fd28c982f3ffec78f74b5c0ad70fa87

PhyloZoo: a unified framework for phylogenetic network analysis in Python

Authors:

Holtgrefe ↗

Reticulate evolutionary processes (events in which lineages merge, such as hybridization, recombination, and horizontal gene transfer) are widespread across nature but cannot be represented by phylogenetic trees alone. Phylogenetic networks have therefore become an important modelling tool, yet existing software is typically tied to specific inference paradigms and provides limited support for working with multiple network representations in a unified and programmable environment. PhyloZoo is an open-source Python framework that lowers the barrier to developing practical, easy-to-use software for phylogenetic network analysis. It provides data structures and algorithms covering the main representations used in the field, together with dedicated visualization tools and robust I/O for all major phylogenetic file formats. A particular emphasis lies on semi-directed phylogenetic networks, which explicitly represent root uncertainty and have so far received limited support in existing software. By offering a shared foundation for developing interoperable tools and a combinatorial layer that supports computational proofs and theoretical exploration, PhyloZoo enables reproducible workflows for applied, methodological, and theoretical studies of reticulate evolution. Availability and implementation: PhyloZoo is implemented in Python and installable from PyPI, with source code, documentation, and examples available at https://github.com/nholtgrefe/phylozoo.

Read & Discuss → View Source →

05.

arXiv (quant-ph) 2026-06-16 DOI: arXiv:2606.15398

Watching a Superconducting Coplanar Waveguide Heat Up with a Single Color Center

Authors:

Ioannis Karapatzakis ↗Jeremias Resch ↗David Hunger ↗Wolfgang Wernsdorfer ↗

arXiv:2606.15398v1 Announce Type: new Abstract: Single color centers in diamond offer a local probe of their cryogenic environment, providing a direct way to quantify heating in spin-control hardware. Here, we establish a single spectrally stable tin-vacancy (SnV) center as an on-chip thermometer for a diamond membrane and use it to characterize microwave- and radio-frequency-induced heating in a superconducting coplanar waveguide patterned on the same chip. We first calibrate the temperature dependence of the optical C-transition frequency and linewidth from $20\,\mathrm{K}$ down to the few-kelvin regime. At lower temperatures, where the optical response becomes weakly temperature dependent, we use the spin-lattice relaxation time $T_1$ as a complementary thermometer and tune its sensitivity with the transverse magnetic-field component. Applying this local thermometer to a niobium coplanar waveguide, we observe magnetic-field-dependent superconducting breakdown under GHz drive, accompanied by abrupt heating of the diamond. In contrast, at $20\,\mathrm{MHz}$ and $400\,\mathrm{mT}$, relevant for nuclear-spin control, we detect no measurable heating up to the breakdown threshold of $9.4\,\mathrm{dBm}$, corresponding to $B_\mathrm{ac}\sim1.2\,\mathrm{mT}$. These results define a safe operating window for superconducting microwave and RF control structures in diamond-based quantum nodes.

Read & Discuss → View Source →

06.

arXiv (math.PR) 2026-06-12 DOI: arXiv:2606.13459

Symmetric Cooperative Motion in Higher Dimensions

Authors:

Louigi Addario-Berry ↗Gavin Barill ↗Hannah Cairns ↗Jessica Lin ↗

arXiv:2606.13459v1 Announce Type: new Abstract: We prove a distributional convergence result for a multidimensional version of symmetric cooperative motion which was introduced and studied in one dimension in [HRW, SCM1]. Our approach relies on framing the associated recursive distributional equation as a discretization of the porous medium equation. A major challenge is to analyze the behaviour of finite difference schemes which approximate weak solutions of the porous medium equation with unbounded initial data. In overcoming this difficulty, we perform a detailed analysis of the probability mass function of symmetric cooperative motion, in which we introduce several new comparison arguments for the discrete process. Consequently, along the way, we establish a novel multidimensional convergence result for a finite difference scheme approximating the ZKB/Barenblatt solution of the porous medium equation, which is of independent interest.

Read & Discuss → View Source →

07.

arXiv (CS.AI) 2026-06-16 DOI: arXiv:2606.08270

An AI Security Agent for University ACMIS: Multi-Vector Threat Detection and Automated Response

Authors:

Joseph Walusimbi ↗Joshua Benjamin Ssentongo ↗

arXiv:2606.08270v2 Announce Type: replace-cross Abstract: University Academic Management Information Systems (ACMIS) are high-value targets for a wide spectrum of security threats including brute-force login attacks, payment fraud, privilege escalation, insider data theft, and academic integrity violations. Traditional rule-based intrusion detection systems are inadequate because many malicious activities are structurally indistinguishable from normal operations. This paper presents an AI-based security agent for ACMIS that combines supervised anomaly detection, behavioural analytics, and a natural language processing chatbot for secure password recovery. The agent monitors five operational layers: authentication, authorisation, financial transactions, user behaviour, and system health, and responds through a four-tier risk escalation framework. A modular architecture allows the core engine to be extended to other institutional systems. Experiments on a simulated ACMIS event log dataset of 147,922 sessions demonstrate a threat detection macro-average F1 of 0.966, compared to 0.156 for a rule-based baseline and 0.836 for a sequence-only (LSTM) baseline, with end-to-end critical-tier automated response latency under 1 ms on a single-node prototype. The integrated recovery chatbot achieves 97.1 percent identity verification accuracy and an 87.3 percent mass-reset attack detection rate with zero false positives on legitimate high volume recovery periods.

Read & Discuss → View Source →

08.

arXiv (CS.LG) 2026-06-24 DOI: arXiv:2606.23725

Computational references are not experiments: pre-registered validation of machine-learned sodium-cathode voltages

Authors:

Krishna Teja Vepa ↗

arXiv:2606.23725v1 Announce Type: cross Abstract: Machine-learning screens for battery materials are trained and judged almost entirely against computed reference voltages, and those references carry their own systematic errors. We report a case in which this matters quantitatively: our own screening stack (a graph-network voltage screen, a prior-art triage layer, and a local PBE+U bench) fails pre-registered validation against experiment-anchored literature values. Verdict thresholds, failure modes, and the primary metric were committed before analysis. On an operator-audited set of known Na-ion cathodes (n = 6 after one documented exclusion; verdict unchanged at n = 7), the raw held-out mean absolute error was 0.67 V, the pre-registered conservative metric, the upper 95% confidence bound of the cross-validated bias-corrected error, was 1.09 V, and the residual was strongly voltage-dependent (r = -0.94), so no additive calibration is valid. On the two compounds where prediction, database reference, and experiment could all be compared, the Materials Project PBE+U reference sat about 0.54 V below measurement: the reference, not the model, dominated the error. A prior-art screen found at least 70% of the targeted Na substitution space already published. We retire the screen, bound what "verified" means for our DFT ledger, and pre-register a calibration audit of it against four benchmark Li couples.

Read & Discuss → View Source →

09.

arXiv (CS.CL) 2026-06-24 DOI: arXiv:2606.24281

CALIBER: Calibrating Confidence Before and After Reasoning in Language Models

Authors:

Conor Finlay ↗Joshua Kurien ↗Saurabh Dash ↗Marzieh Fadaee ↗Beyza Ermis ↗

Reasoning language models are increasingly asked not only to answer difficult questions, but also to estimate their likelihood of success. Existing methods typically elicit confidence only once: either before thinking or after answering. We argue that confidence in reasoning models is state-dependent: before thinking, confidence should estimate the chance of the model correctly solving the prompt, while after thinking it should predict whether the realized answer is likely to be correct. This distinction determines the appropriate supervision target: prompt-level success should supervise confidence estimates made after seeing the prompt, while individual answer-level correctness should supervise confidence estimates made after answering. We introduce CALIBER (Calibration Before and After Reasoning), which elicits both estimates and supervises each with the target matched to its information state. Under this unified protocol, CALIBER reduces Expected Calibration Error (ECE) by 52.5% over the strongest single-confidence baseline on BigMathDigits for the 7B model, while achieving the best Brier score and AUROC, and remains within 2.1 points of the best accuracy. Further, on a larger 30B model, CALIBER achieves the best ECE on BigMathDigits while remaining competitive in Brier score and AUROC. Out of distribution, it achieves the best ECE and Brier score on GPQA and TriviaQA, and remains competitive on SimpleQA. Ablations further show that this position-target alignment is most beneficial under distribution shift where it consistently reduces calibration error across all out-of-distribution benchmarks.

Read & Discuss → View Source →

10.

arXiv (CS.CV) 2026-06-17 DOI: arXiv:2605.20708

Rethinking Cross-Layer Information Routing in Diffusion Transformers

Authors:

Chao Xu ↗Maohua Li ↗Qirui Li ↗Yixuan Xu ↗Yanke Zhou ↗Yunhe Li ↗Cuifeng Shen ↗Hanlin Tang ↗Kan Liu ↗Tao Lan ↗Lin Qu ↗Shao-Qun Zhang ↗…

Diffusion Transformers (DiTs) have become a de facto backbone of modern visual generation, and nearly every major axis of their design – tokenization, attention, conditioning, objectives, and latent autoencoders – has been extensively revisited. The residual stream that governs how information accumulates across layers, however, has been directly inherited from the original Transformer. In this paper, we present a systematic empirical analysis of cross-layer information flow in DiTs, jointly along depth and denoising timestep, and identify three concrete symptoms of traditional residual addition, namely monotonic forward magnitude inflation, sharp backward gradient decay, and pronounced block-wise redundancy. Motivated by this diagnosis, we propose Diffusion-Adaptive Routing (\textsc{DAR}), a drop-in residual replacement that performs learnable, timestep-adaptive, and non-incremental aggregation over the history of sublayer outputs. Moreover, the proposed \textsc{DAR} is compatible with many modern Transformer enhancement methods, such as REPA. On ImageNet $256\times256$, \textsc{DAR} improves SiT-XL/2 by $2.11$ FID ($7.56$ vs.\ $9.67$) and matches the baseline's converged quality with $8.75\times$ fewer training iterations. Stacked on top of REPA, it yields a $2\times$ training acceleration in the early stage, suggesting cross-layer information routing as an underexplored design axis in diffusion modeling, one that operates orthogonally to existing representation-alignment objectives. Beyond pretraining, \textsc{DAR} can also be applied during the fine-tuning stage of large-scale T2I models and preserves high-frequency details during Distribution Matching Distillation.

Read & Discuss → View Source →

11.

arXiv (CS.CL) 2026-06-12 DOI: arXiv:2510.16380

MoReBench: Evaluating Procedural and Pluralistic Moral Reasoning in Language Models, More than Outcomes

Authors:

As AI systems progress, we rely more on them to make decisions with us and for us. To ensure that such decisions are aligned with human values, it is imperative for us to understand not only what decisions they make but also how they come to those decisions. Reasoning language models, which provide both final responses and (partially transparent) intermediate thinking traces, present a timely opportunity to study AI procedural reasoning. Unlike math and code problems which often have objectively correct answers, moral dilemmas are an excellent testbed for process-focused evaluation because they allow for multiple defensible conclusions. To do so, we present MoReBench: 1,000 moral scenarios, each paired with a set of rubric criteria that experts consider essential to include (or avoid) when reasoning about the scenarios. MoReBench contains over 23 thousand criteria including identifying moral considerations, weighing trade-offs, and giving actionable recommendations to cover cases on AI advising humans moral decisions as well as making moral decisions autonomously. Separately, we curate MoReBench-Theory: 150 examples to test whether AI can reason under five major frameworks in normative ethics. Our results show that scaling laws and existing benchmarks on math, code, and scientific reasoning tasks fail to predict models' abilities to perform moral reasoning. Models also show partiality towards specific moral frameworks (e.g., Benthamite Act Utilitarianism and Kantian Deontology), which might be side effects of popular training paradigms. Together, these benchmarks advance process-focused reasoning evaluation towards safer and more transparent AI.

Read & Discuss → View Source →

12.

arXiv (CS.CL) 2026-06-17 DOI: arXiv:2604.13899

Do We Still Need Humans in the Loop? Comparing Human and LLM Annotation in Active Learning for Hostility Detection

Authors:

Ahmad Dawar Hakimi ↗Lea Hirlimann ↗Isabelle Augenstein ↗Hinrich Sch\"utze ↗

Instruction-tuned LLMs can annotate thousands of instances at low cost. This raises two questions for active learning (AL): can LLM labels replace human labels within the AL loop, and does AL remain necessary when entire corpora can be cheaply labeled? We investigate both on a new dataset of 277,902 German political TikTok comments (25,974 LLM-labeled, 5,000 human-annotated), comparing LLM and human annotation across seven conditions, four encoders, and 10 random seeds. Under a two-question interface that mirrors the human annotation task, LLM annotation at scale outperforms human-supervised classifiers at roughly one-tenth the cost (\$28 for GPT-5.2 Batch API vs. \$316 for Prolific). The advantage holds for both a closed-source (GPT-5.2) and an open-weight (Qwen3.5-122B-10B) LLM, is robust under soft-label evaluation, and is unlocked specifically by the two-question decomposition; a holistic single-prompt baseline only ties with human supervision. AL provides no reliable advantage over random sampling under either LLM annotator. However, error structure varies sharply: only GPT-5.2 under the two-question interface produces classifiers with near-human FP/FN balance, while other LLM variants over-flag border-control and economic competition discourse. We release the dataset and code.

Read & Discuss → View Source →

13.

arXiv (CS.LG) 2026-06-17 DOI: arXiv:2606.17445

Toward Controllable Catalyst Inverse Design via Large-Scale Autoregressive Pretraining

Authors:

Dong Hyeon Mok ↗Jonggeol Na ↗Seoin Back ↗

arXiv:2606.17445v1 Announce Type: new Abstract: Inverse design of heterogeneous catalysts remains challenging because catalyst surfaces exhibit substantial structural complexity with coupled surface-adsorbate interactions across a vast chemical space that is difficult to explore efficiently through conventional screening alone. Although machine learning-based high-throughput screening has accelerated catalyst discovery, its efficiency inevitably declines as the search space grows, motivating the development of generative models that can directly construct catalysts with target properties. Here, we present a conditional catalyst generative model based on the Generative Pretrained Transformer architecture with a numerical embedding layer that enables the generation of catalyst structures conditioned on both categorical and continuous properties within a single autoregressive framework. The model was pretrained on 133 million catalyst structures and subsequently fine-tuned on approximately 460,000 optimized structures with associated categorical properties and binding energies for conditional generation. The resulting model achieved 98% structural validity, 95% optimization validity, and high categorical condition fidelity, with a 93 % joint match rate for adsorbate type and composition. For binding energy conditioning, the match rate of approximately 20% represents a four-fold improvement over the baseline training distribution, and the generated distributions shift systematically toward the target values, enabling a 1.5 to 4-fold improvement in screening efficiency for reaction-targeted catalyst discovery without additional fine-tuning. These results show that large-scale autoregressive pre-training, combined with explicit property conditioning, provides a practical route toward controllable catalyst generation and accelerated catalysts discovery.

Read & Discuss → View Source →

14.

arXiv (CS.AI) 2026-06-15 DOI: arXiv:2606.13858

Mood-Aware Music Recommendation: Integrating User Affective Signals into Ranking Systems

Authors:

Terence Zeng ↗Abhishek K. Umrawal ↗

arXiv:2606.13858v1 Announce Type: cross Abstract: Recommendation systems are essential in modern music streaming platforms due to the vast amount of available content. While collaborative filtering is widely used to suggest items based on the preferences of others with similar patterns, it performs poorly in domains where user-item interactions are sparse, such as music. Content-based filtering is an alternative approach that examines the qualities of the items themselves. Genre, instrumentation, and lyrics have been explored; however, relatively little attention has been given to emotion recognition. Since a user's emotional state strongly influences their music choice, incorporating mood signals offers a promising direction for personalization. In this work, we propose a mood-conditioned ranking framework that integrates user affective signals into the recommendation process via softmax-based sampling in the energy-valence space. We evaluate the approach via single-blind experiments in which participants compare recommendations from the proposed system against a baseline. The results indicate improved perceived recommendation quality, providing preliminary evidence for the effectiveness of incorporating mood-based inputs into music recommendations.

Read & Discuss → View Source →

15.

arXiv (CS.CL) 2026-06-24 DOI: arXiv:2606.24172

A P\={a}ninian Foundation for Indic Language Processing

Authors:

Ritwik Banerjee ↗Lav R. Varshney ↗

More than a billion people communicate in Indic languages, yet the natural language processing infrastructure serving them remains fragmented and underdeveloped. The cause is structural: the field organizes its tools and benchmarks around individual languages or small subsets of genealogical language families, building separate analyzers, parsers, and datasets for each language and starting over for the next. This overlooks a deep regularity. Through more than two millennia of convergence around Sanskrit, Indic languages came to share a morphosyntactic architecture formalized in P\={a}nini's grammar, the Ast\={a}dhy\={a}y\={i}. This cuts across genealogical lines, uniting languages through a common framework. We argue that this P\={a}ninian framework supplies a unifying computational architecture the field has lacked, and that benchmarks grounded explicitly in it would make Indic language systems more accurate, more data-efficient, and more transferable, effectively merging many apparently disparate and sparse Indic language resources into a single high-resource metalanguage bedrock. We propose a four-part benchmark suite to render this shared architecture explicit, measurable, and ready to be leveraged for practical applications. Moreover, we underscore the question it raises for interpretability research: whether neural models trained on these languages come to represent P\={a}nini's categories on their own.

Read & Discuss → View Source →

16.

arXiv (CS.CL) 2026-06-11 DOI: arXiv:2606.11643

Improving Cross-Format Robustness in Language Models with Multi-Format Training

Authors:

June M. Liu ↗Shaomian Zheng ↗He Cao ↗Dingnan Jin ↗Qing Cui ↗Jun Zhou ↗

Large language models often remain sensitive to answer format: a question solved correctly in one form may fail in another semantically equivalent form. To study this gap, we define cross-format robustness as the extent to which a model answers the same underlying question consistently across formats. We then compare full-format training with FormatMix, which expands only a subset of training items into multiple equivalent formats using either random or targeted selection. Across GLM4 and Llama-3.1, multi-format supervision consistently improves both task performance and cross-format robustness, whereas Multiple-choice question (MCQ)-only supervision alone brings little benefit and can even reduce robustness. We further find that expanding only about 30% of the training set into multiple formats often recovers most of the gain from full-format training, and this effect appears across the model families and sizes we study. These results suggest that format diversity, rather than additional supervision alone, is the key driver of robustness. That lightweight multi-format augmentation is a practical way to make LLMs less sensitive to answer format without changing the base model.

Read & Discuss → View Source →

17.

arXiv (CS.CV) 2026-06-18 DOI: arXiv:2508.11211

Efficient Image-to-Image Schrödinger Bridge for CT Field of View Extension

Authors:

Zhenhao Li ↗Song Ni ↗Long Yang ↗Xiaojie Yin ↗Haijun Yu ↗Jiazhou Wang ↗Hongbin Han ↗Weigang Hu ↗Yixing Huang ↗

Computed tomography (CT) is a cornerstone imaging modality for non-invasive, high-resolution visualization of internal anatomical structures. However, when the scanned object exceeds the scanner's field of view (FOV), projection data are truncated, resulting in incomplete reconstructions and pronounced artifacts near FOV boundaries. Conventional reconstruction algorithms struggle to recover accurate anatomy from such data, limiting clinical reliability. Deep learning approaches have been explored for FOV extension, with diffusion generative models representing the latest advances in image synthesis. Yet, conventional diffusion models are computationally demanding and slow at inference due to their iterative sampling process. To address these limitations, we propose an efficient CT FOV extension framework based on the image-to-image Schrödinger Bridge (I$^2$SB) diffusion model. Unlike traditional diffusion models that synthesize images from pure Gaussian noise, I$^2$SB learns a direct stochastic mapping between paired limited-FOV and extended-FOV images. This direct correspondence yields a more interpretable and traceable generative process, enhancing anatomical consistency and structural fidelity in reconstructions. I$^2$SB achieves superior quantitative performance, with root-mean-square error (RMSE) values of 49.8 HU on simulated noisy data and 152.0 HU on real data, outperforming state-of-the-art diffusion models such as conditional denoising diffusion probabilistic models (cDDPM) and patch-based diffusion methods. Moreover, its one-step inference enables reconstruction in just 0.19 s per 2D slice, representing over a 700-fold speedup compared to cDDPM (135 s) and surpassing DiffusionGAN (0.58 s), the second fastest. This combination of accuracy and efficiency indicates that I$^2$SB has potential for real-time or clinical deployment.

Read & Discuss → View Source →

18.

arXiv (CS.LG) 2026-06-11 DOI: arXiv:2606.11998

Bootstrapped Monitoring: Leveraging Transparent Reasoning to Oversee Stronger AI Agents

Authors:

Frank Xiao ↗Mary Phuong ↗

arXiv:2606.11998v1 Announce Type: new Abstract: Trusted monitoring is a cornerstone of AI control. However, as frontier models grow more capable, the increasing capabilities gap between trusted and untrusted models may render trusted models unreliable monitors. We introduce bootstrapped monitoring, a protocol that addresses this by inserting a stronger, intermediate untrusted model with transparent chain-of-thought reasoning into the oversight chain. The untrusted monitor ($U_m$) evaluates the agent's actions, while a weaker trusted model ($T$) oversees $U_m$'s reasoning to detect collusion. We evaluate bootstrapped monitoring on multi-turn software engineering tasks (BashArena) across multiple agents and monitors. Bootstrapped monitoring substantially improves catch rates over trusted-only monitoring, even when the untrusted monitor actively colludes with the agent, provided we have access to its raw chain-of-thought. Our results suggest that bootstrapped monitoring can extend the useful lifetime of trusted models in control as AI capabilities advance.

Read & Discuss → View Source →

19.

arXiv (CS.CV) 2026-06-18 DOI: arXiv:2606.18749

Toward Training-Free Zero-Shot Anomaly Detection in 3D Medical Images: A Batch-Based Approach Using 2D Foundation Models

Authors:

Tai Le-Gia ↗

Zero-shot anomaly detection (ZSAD) is attractive for medical imaging because clinical systems must handle heterogeneous acquisition protocols, changing patient populations, and pathologies for which annotated training data may be unavailable. Most existing zero-shot anomaly detection methods are designed for 2D images, and their direct extension to 3D medical volumes is limited by the scarcity of large-scale volumetric foundation models or by the difficulty of utilizing volumetric context. We propose CS3F, a training-free batch-based framework for ZSAD in 3D medical images using 2D foundation models. Each volume is decomposed along multiple anatomical axes and encoded slice-wise by a 2D vision transformer. These are then converted into localized volumetric tokens by pooling neighboring slice features. Anomaly scores are obtained from cross-subject mutual similarity: tokens that lack close analogues in other subjects are assigned higher anomaly scores. To reduce the attenuation of focal lesion signals caused by depth pooling, we introduce a coarse-to-fine tokenization strategy that enables fine-resolution volumetric scoring without exhaustive matching. CS3F is evaluated on brain MRI across metastases, glioma, and stroke, as well as validated on lung CT to test generalizability beyond atlas-aligned brain MRI. The results show that frozen 2D foundation models can support anomaly localization in 3D medical images, and that the benefit of fine tokenization depends strongly on lesion contrast and imaging modality.

Read & Discuss → View Source →

20.

arXiv (CS.CL) 2026-06-19 DOI: arXiv:2606.20255

The Register Gap: A Meaning Intelligence Framework for Nigerian Public Discourse

Authors:

Celestine Achi ↗

We introduce the Meaning Intelligence Framework (MIF), a nine-dimension annotation and evaluation schema for Nigerian public discourse that separates surface sentiment from true communicative intent. Existing benchmarks for Nigerian languages, including NaijaSenti and AfriSenti, treat sentiment classification as a three-way polarity task (positive, negative, neutral). We argue that the dominant failure mode of AI systems on Nigerian discourse is not translation failure but context failure: the same utterance carries opposite pragmatic force depending on speaker, audience, and situation. The MIF operationalises this insight across nine scored dimensions: register, surface sentiment, true intent, irony, coded subtext, risk tier, annotator confidence, speaker emotion, and recommended communications action. We construct a 30-item calibration dataset spanning Standard English, Nigerian English, Nigerian Pidgin, and code-mixed registers, and evaluate a frontier language model (Gemini 2.5 Flash) under zero-shot and schema-informed prompting conditions. The headline finding is the Register Gap: zero-shot register classification accuracy is 33.3%, rising to 73.3% (+40 points) when the model receives the MIF schema in-context. The composite Meaning Intelligence Score increases by 5.4 points (73.2 to 78.6) under schema-informed prompting, with the largest practical gains in register identification, coded-subtext detection (+10 points), and strategic action recommendation (+10.3 points). We release the framework specification, annotation guidelines, and the 30-item public calibration set to support reproducibility, while retaining a private holdout corpus for contamination-protected evaluation.

Read & Discuss → View Source →

21.

arXiv (CS.AI) 2026-06-12 DOI: arXiv:2606.13247

EPIG: Emotion-Based Prompting for Personalised Image Generation

Authors:

Emna Othmen ↗Mohamed Yassine Landolsi ↗Lotfi Ben Romdhane ↗

arXiv:2606.13247v1 Announce Type: new Abstract: Text-to-image diffusion models have achieved impressive results in synthesizing high-quality images from natural language prompts. However, commonly used prompting strategies remain relatively generic, limiting the model's ability to accurately express emotional intent and nuanced affective attributes. This work proposes EPIG, a method that enhances emotional expressiveness at the prompt level prior to image generation. Grounded in psychologically informed emotion representations (valence-arousal) and leveraging structured, role-aware prompt enrichment, EPIG enriches emotion-related components of prompts without modifying or retraining the image generation backbone. The resulting emotion-aware prompts guide the generative process toward more emotionally coherent visual outputs, with particular effectiveness in controlling arousal. EPIG is lightweight, training-free, and well suited for resource-constrained and personalized image generation scenarios. Experimental results on a benchmark of 10 diverse prompts show that EPIG reduces mean arousal error compared to strong baselines, including naive insertion and LLM-based prompt expansion, with reductions of 14% and 12%, respectively. These improvements are statistically significant. EPIG also preserves valence alignment and semantic consistency, as measured by CLIPScore and supported by ablation studies. The effect is more pronounced on prompts containing explicit subjects such as humans, children, or animals, where the reduction reaches 17%, highlighting the subject-sensitive behavior of the proposed method.

Read & Discuss → View Source →

22.

arXiv (CS.CV) 2026-06-24 DOI: arXiv:2606.24649

Agentic Collaborative Cognition for Zero-Shot 3D Understanding

Authors:

Wenxin Wang ↗Bo Zhang ↗Feng Chen ↗Zixuan Wang ↗Wen Li ↗Changsheng Li ↗Yinjie Lei ↗

Recent advancements have explored agentic zero-shot 3D understanding by reformulating it as video keyframe understanding with Multimodal Large Language Models (MLLMs). However, existing methods face an intrinsic bottleneck due to the finite observation perspectives inherent in videos and the implicit perception of 3D scenes. In this paper, we propose a collaborative multi-agent framework that assigns a Planning Agent to handle high-level viewpoint planning and supplement novel perspectives, and a Perception Agent to explicitly summarize the 3D scene into a structured holistic cognitive map. Specifically, Planning Agent first analyzes this cognitive map to determine query-relevant viewpoints and supplements missing critical perspectives to ensure comprehensive observation. Subsequently, Perception Agent documents object-level attributes from these views by assigning consistent instance identifiers across viewpoints, thereby integrating fragmented observations into the holistic cognitive map. In parallel, it provides feedback to filter out mismatched candidate objects and guide subsequent viewpoint planning. Through this closed-loop iterative process, two agents collaboratively figure out candidates until Perception Agent determines that sufficient information has been captured to complete the task. Extensive experiments demonstrate that our method achieves state-of-the-art performance on 6 benchmarks, with improvements of 11.1\% Acc@0.5 on ScanRefer, 14.6 BLEU-1 on 3D-assisted dialog, and 2.1 EM on SQA3D.

Read & Discuss → View Source →

23.

arXiv (CS.CV) 2026-06-12 DOI: arXiv:2606.13673

SpatialClaw: Rethinking Action Interface for Agentic Spatial Reasoning

Authors:

Seokju Cho ↗Ryo Hachiuma ↗Abhishek Badki ↗Hang Su ↗Byung-Kwan Lee ↗Chan Hee Song ↗Sifei Liu ↗Subhashree Radhakrishnan ↗Seungryong Kim ↗Yu-Chiang Frank Wang ↗Min-Hung Chen ↗

Spatial reasoning, the ability to determine where objects are, how they relate, and how they move in 3D, remains a fundamental challenge for vision-language models (VLMs). Tool-augmented agents attempt to address this by augmenting VLMs with specialist perception modules, yet their effectiveness is bounded by the action interface through which those tools are invoked. In this work, we study how the design of this interface shapes the agent's capacity for open-ended spatial reasoning. Existing spatial agents either employ single-pass code execution, which commits to a full analysis strategy before any intermediate result is observed, or rely on a structured tool-call interface that often offers less flexibility for freely composing operations or tailoring the analysis to each task. Both designs offer limited flexibility for open-ended, complex 3D/4D spatial reasoning. We therefore propose SpatialClaw, a training-free framework for spatial reasoning that adopts code as the action interface. SpatialClaw maintains a stateful Python kernel pre-loaded with input frames and a suite of perception and geometry primitives, letting a VLM-backed agent write one executable cell per step conditioned on all prior outputs, enabling the agent to flexibly compose and manipulate perception results and adapt its analysis to both intermediate text and visual observations and the demands of each problem. Evaluated across 20 spatial reasoning benchmarks spanning a broad range of static and dynamic 3D/4D spatial reasoning tasks, SpatialClaw achieves 59.9% average accuracy, outperforming the recent spatial agent by +11.2 points, with consistent gains across six VLM backbones from two model families without any benchmark- or model-specific adaptation.

Read & Discuss → View Source →

24.

arXiv (CS.AI) 2026-06-24 DOI: arXiv:2606.24575

Quant Convergence: Bridging Classical Value Investing and Modern Factor Models for Systematic Equity Selection

Authors:

Augusto Eiji Yamazaki ↗Hugo Garrido-Lestache Belinchon ↗

arXiv:2606.24575v1 Announce Type: new Abstract: Modern finance relies heavily on complex machine learning models to find patterns in the stock market. However, as these AI models get more complicated, they often memorize short-term market noise instead of finding companies with real, lasting value. We designed this research to test if Benjamin Graham's classic value investing rules could act as a mathematical "low-pass filter" to keep these modern models in check. We built three different sets of features - pure Graham rules, modern market factors, and a mix of both - and tested them against highly complex models (XGBoost and AutoGluon) using 20 years of S&P 500 data. By applying a strict buy-and-hold strategy over a four-year test period (March 2022 to March 2026), the results showed that more complex algorithms do not always win. While the AutoGluon model captured high returns (222.68%), it suffered a substantial 39.78% drop because it bought volatile tech stocks right before the market crashed. On the other hand, the pure Graham Random Forest achieved the highest overall return (232.13%) with much less risk (1.38 Calmar Ratio). Furthermore, the Combined Random Forest successfully mixed momentum with Graham's rules, making a 202.91% return while keeping the lowest maximum drop (34.53%) of any model tested. Ultimately, this research proves that Graham's "margin of safety" isn't outdated; it is actually a highly effective way to prevent modern AI from taking on too much risk.

Read & Discuss → View Source →

25.

arXiv (quant-ph) 2026-06-24 DOI: arXiv:2602.03834

Temperature driven false vacuum decay in coherently coupled Bose superfluids

Authors:

Paniyanchatha Moolayil Sivasankar ↗Franco Dalfovo ↗Alessio Recati ↗Arko Roy ↗

arXiv:2602.03834v2 Announce Type: replace-cross Abstract: The relaxation of a quantum field from a metastable state (false vacuum) to a stable one (true vacuum), also known as false vacuum decay, is a fundamental problem in quantum field theory and cosmology. We study this phenomenon using a two-dimensional interacting and coherently coupled Bose-Bose mixture, a platform that has already been employed experimentally to investigate false vacuum decay in one dimension. In such a mixture, it is possible to define an effective magnetization that acts as a quantum field variable. Using the Stochastic Gross-Pitaevskii equation (SGPE), we prepare thermal equilibrium states in the false vacuum and extract decay rates from the magnetization dynamics. The decay rates show an exponential dependence on temperature, in line with the thermal theory of instantons. Since the SGPE is based on complex scalar fields, it also allows us to explore the behavior of the phase, which turns out to become dynamic during decay. Our results confirm the SGPE as an effective tool for studying coupled magnetization and phase dynamics and the associated instanton physics in ultracold quantum gases.

Read & Discuss → View Source →

Explore the Frontier of Global Academia