Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.LG) 2026-06-24

Separating Oblivious and Adaptive Models of Variable Selection

arXiv:2602.16568v2 Announce Type: replace-cross Abstract: Sparse recovery is among the most well-studied problems in learning theory and high-dimensional statistics. In this work, we investigate the statistical and computational landscapes of sparse recovery with $\ell_\infty$ error guarantees. This variant of the problem is motivated by variable selection tasks, where the goal is to estimate the support of a $k$-sparse signal in $\mathbb{R}^d$. Our main contribution is a provable separation between the oblivious (``for each'') and adaptive (``for all'') models of $\ell_\infty$ sparse recovery. We show that under an oblivious model, the optimal $\ell_\infty$ error is attainable in near-linear time with $\approx k\log d$ samples, whereas in an adaptive model, $\gtrsim k^2$ samples are necessary for any algorithm to achieve this bound. This establishes a surprising contrast with the standard $\ell_2$ setting, where $\approx k \log d$ samples suffice even for adaptive sparse recovery. We conclude with a preliminary examination of a partially-adaptive model, where we show nontrivial variable selection guarantees are possible with $\approx k\log d$ measurements.

02.
arXiv (CS.AI) 2026-06-18

Quality Perceptions and Intended Engagement in Response to AI-Generated and AI-Assisted News

arXiv:2409.03500v4 Announce Type: replace-cross Abstract: The increasing use of artificial intelligence (AI) in news production raises important questions about how audiences perceive and respond to AI-generated journalism. This preregistered survey experiment (N = 599, German-speaking Switzerland) examines (i) perceptions of article quality (measured as credibility, readability, and expertise) across news excerpts that were human-written, AI-assisted, or fully AI-generated, and (ii) self-reported intentions to engage following disclosure of AI involvement. Participants rated two short news excerpts before learning how they had been produced. Articles across all conditions were evaluated similarly in perceived quality. After disclosure, participants in the AI-assisted and AI-generated conditions reported a higher willingness to continue reading their assigned articles compared to the control group, but future willingness to read AI-generated news did not differ across conditions. Overall, the findings suggest that readers assess AI-generated and human-written news comparably in quality, while disclosure of AI use can momentarily increase curiosity or interest without yet changing longer-term reading intentions.

03.
arXiv (CS.LG) 2026-06-16

Hierarchical Advantage Weighting for Online RL Fine-Tuning of VLAs from Sparse Episode Outcomes

arXiv:2606.17043v1 Announce Type: cross Abstract: When pretrained VLA policies are fine-tuned through online RL, each rollout episode produces only a single binary outcome (success or failure), yet the actor update requires per-transition supervision. Existing approaches commonly reduce this sparse outcome to a single scalar reward or advantage signal, which conflates distinct forms of transition-level feedback and provides limited guidance once basic task success becomes achievable. First, a single scalar signal conflates the two objectives of viability and efficiency; once basic success is achieved, the binary label provides no gradient to distinguish efficient completions from slow ones. Second, real-world rollouts mix autonomous and intervention segments; naively assigning episode outcomes across these boundaries introduces incorrect credit assignment. To address these issues, we propose Hierarchical Advantage-Weighted Behavior Cloning (HABC), which trains separate critic heads for these two objectives on different data subsets and combines their outputs with a state-adaptive balance. A state-adaptive gate $g_t$ merges their one-step advantages, prioritizing viability when success is uncertain and shifting to efficiency only when viability is high, and converts the result into per-transition weights on the actor loss. Intervention-aware credit assignment further restricts outcome labels to segments executed by the current policy, preventing supervision from leaking across intervention boundaries. In real-robot experiments on three contact-rich bimanual tasks, HABC raises success from supervised fine-tuning (SFT) baselines of 36%, 44%, and 12% to 92%, 88%, and 38%.

04.
PLOS Computational Biology 2026-06-15

WormSORT: A detection-based multiple object tracking model for individual silkworms in breeding environments

Authors:

by Hongkang Shi, Linbo Li, Shiping Zhu, Haibo He, Minghui Zhu, Jianfei Zhang Variety breeding has long been a cornerstone of high-quality agriculture, and recent advances in artificial intelligence have opened new avenues for accelerating biological breeding. In this study, we applied multiple object tracking (MOT) technology to silkworm breeding to achieve efficient, non-invasive, and dynamic individual monitoring. Unlike pedestrian or vehicle tracking, silkworms pose unique challenges for MOT due to their small size, dense distribution, and high inter-individual similarity, which complicate accurate tracking and behavioral analysis. To address these issues, we propose WormSORT, an enhanced tracking method based on a tracking-by-detection framework with an optimized data association strategy. A pre-trained detection model identifies silkworms in each frame, and deep feature vectors are extracted using a re-identification network. Identity association is first performed using Intersection over Union (IoU) matching, followed by deep feature similarity for unmatched cases, improving both tracking accuracy and reliability. To further enhance tracking stability, we introduce a candidate input padding mechanism, including IoU padding and feature padding, ensuring that high-confidence unmatched trajectories and detections remain involved in the matching process. To validate the proposed tracking strategy, we constructed two multiple silkworm tracking (MST) datasets: MST-50, containing approximately 50 individuals over 1000 frames, and MST-100, containing approximately 100 individuals over 1200 frames. Experimental results demonstrate that WormSORT outperforms existing methods, including DeepSORT, StrongSORT, OCSORT, ByteTrack, and BotSORT, achieving superior tracking performance. This study provides a valuable reference for silkworm tracking and behavioral analysis, contributing to the advancement of high-quality silkworm rearing and management.

05.
arXiv (CS.LG) 2026-06-19

Influence-Guided Concolic Testing of Transformer Robustness

arXiv:2509.23806v2 Announce Type: replace-cross Abstract: Concolic testing for neural networks alternates concrete execution with constraint solving to search for inputs that flip model decisions. We present a concolic tester for Transformer classifiers that uses SHAP estimates to rank pending path predicates by their impact on the current prediction. To support self-attention with multiple heads in execution backed by SMT solving, we implement attention semantics in pure Python that are compatible with the solver and make the softmax boundary explicit by concretizing exponentiation arguments. We evaluate our method on CIFAR-10 across three compact Transformer classifiers, ResNet18, and VGG16 under a one-pixel budget and a 900s horizon. Across the 500 model–input pairs in this matched comparison, our method achieves 60% success, compared with 15% for a differential evolution baseline that treats the model as a black box. In the primary two-layer Transformer branch-ordering study, SHAP-based predicate prioritization raises success from 56% to 60% and reduces median attack time by 51%. These results show that influence-guided path exploration can make concolic testing a practical way to find adversarial examples in Transformer models.

06.
arXiv (quant-ph) 2026-06-15

Universal Speed Limit in a Far-from-Equilibrium Bose Gas: Symmetry and Dynamical Decoherence

arXiv:2605.11895v2 Announce Type: replace-cross Abstract: Predicting universal transport coefficients in far-from-equilibrium quantum systems remains a fundamental challenge. A paradigmatic example is the non-thermal fixed point (NTFP) of isolated Bose gases, where coherence spreads as $\ell^2(t) = C\hbar t/m$ with a universal constant $C$. While the scaling exponent $z=2$ is well established, the amplitude $C$ has remained elusive because the underlying particle cascade $n(k)\sim k^{-4}$ leads to a divergent kinetic energy, threatening the very existence of a constant speed limit. Here we resolve this paradox and present the first analytical, parameter-free prediction of a universal amplitude $C$. A deep interplay between symmetry and dissipation is uncovered. The emergent weak U(1) symmetry at the NTFP enforces a conserved total current, forcing the low-energy phase dynamics to obey a diffusive Langevin equation with noise entering as the divergence of a stochastic current. This structure, combined with dynamical decoherence of high-momentum modes, yields a universal power-law momentum distribution $\tilde{f}(v)\sim(1+v^2)^{-3}$ (with $v=k\ell$) that naturally regularizes the ultraviolet divergence. From this, a parameter-free geometric baseline $C=3$ is obtained, independent of microscopic details. The experimental value $C=3.4(3)$ [Martirosyan et al., Nature 647, 608 (2025)] is then shown to be quantitatively consistent with universal logarithmic corrections arising from a marginally irrelevant coupling at the fixed point. A new paradigm is thus established for predicting transport coefficients in strongly correlated non-equilibrium systems: symmetry constraints determine the low-energy effective theory, dynamical decoherence provides a natural ultraviolet completion, and scaling analysis delivers testable predictions moving beyond scaling exponents to quantitative amplitude prediction.

07.
arXiv (CS.CV) 2026-06-17

Landsat-Sentinel-2 Algal Bloom Mapping Using Vision Transformers: Model Description, Implementation, and Examples

Coastal algal bloom monitoring requires frequent, spatially detailed, and globally consistent observations, provided by Landsat-8/9 and Sentinel-2 A/B/C. Together, these missions offer over a decade of medium-resolution multispectral imagery with near-global coverage every 2-3 days, enabling the detection of fragmented bloom structures not resolvable by coarse ocean-color sensors. However, their use in aquatic environments remains challenging due to limited spectral coverage and a lack of harmonized reflectance products. As an alternative to traditional bio-optical methods, deep learning-based image classification offers a data-driven approach that can overcome many of these limitations. This study presents the first successful implementation of vision transformer-based coastal algal bloom mapping using 30-m Landsat-Sentinel-2 images. A globally distributed bloom patch dataset was generated across bloom-prone coastal hotspots worldwide. Four transformer-based architectures were compared against a standard convolutional baseline for fine-scale bloom detection, and assessed under different optical water types and atmospheric and surface conditions. All deep learning models showed strong capabilities in detecting floating bloom areas, with omission and commission errors of 8-65%. Under cloud and glint stress in a time series, the Swin Transformer outperformed traditional spectral-index approaches, which produced widespread false positives, effectively avoiding cloud- and glint-affected pixels. Comparisons with MODIS-derived products further highlighted the benefits of higher spatial resolution in detecting fragmented and irregularly affected blooms. Our findings support deep learning as a reliable tool for medium-resolution, consistent monitoring of floating algal blooms in dynamic coastal environments.

08.
arXiv (CS.LG) 2026-06-12

Foundations of Practical Quantum Advantage in Quantum-Informed Machine Learning for Predicting Chaos

arXiv:2606.13422v1 Announce Type: cross Abstract: We develop theoretical foundations for a practical quantum-advantage mechanism in quantum-informed machine learning for chaotic dynamical systems. A family of k-indexed higher-order quantum statistical priors (Q-Priors) hosts the k-point marginal of the invariant measure on n_q = kq qubits, extending the single-site construction of prior work. We prove a two-stage advantage. In the representation stage, superposition and entanglement compactly store non-factorisable spatial correlations of the invariant measure on n_q qubits. In the extraction stage, joint Bell measurements on two copies estimate any post hoc Pauli functional with a copy-pair count independent of n_q, whereas any adaptive single-copy protocol for the corresponding full-Pauli read-out requires Omega(2^(n_q)) copies; this is a provable quantum-classical separation in copy-measurement complexity. The two-copy read-out is realised in simulation and on IQM superconducting processors. Two case studies instantiate the mechanism in workflows of independent scientific value: a turbulent channel-flow study in which the two-copy read-out yields a named non-diagonal correlator of the invariant measure (the velocity-direction coherence), and a medium-range weather forecasting workflow on the European Centre for Medium-Range Weather Forecasts ERA5 reanalysis in which the diagonal k

09.
arXiv (CS.LG) 2026-06-17

Decision-Driven Geosteering Under Uncertainty: A Unified Framework for Sequential Decision Optimization

arXiv:2606.17331v1 Announce Type: new Abstract: Geosteering requires navigating a well trajectory through an unknown geological configuration, while sequentially updating decisions based on indirect measurements acquired during drilling. This work presents an uncertainty-aware geosteering framework that tightly integrates particle filtering for probabilistic subsurface interpretation with value-based reinforcement learning for sequential decision-making. Geological uncertainty ahead of the drill bit is represented explicitly through a particle filter (PF), enabling belief-informed control rather than deterministic trajectory correction. The framework couples PF belief updates with belief-informed decision policies and evaluates three decision-making options that operate under identical uncertainty representations: an interpretable Approximate Dynamic Programming (ADP) scheme, a Deep Q-learning baseline, and a Dual Deep Reinforcement Learning (Dual DRL) architecture trained with a target Q-network scheme for stability, using a dueling (value/advantage) decomposition for Q-value parameterization. Beyond final placement performance, we assess policy behavior using stability-oriented metrics that quantify steering smoothness over time, providing additional operational insight into how decision policies respond as uncertainty evolves. The framework is integrated with an API for validation within an industrial geosteering simulator under realistic measurement noise and drilling constraints. Using identical geological realizations, operational limits, and reward definitions across methods, the experiments provide a controlled and high-fidelity evaluation of how alternative decision policies behave throughout the drilling process, rather than evaluating performance solely from the final well trajectory.

11.
arXiv (quant-ph) 2026-06-11

Magneto-Optical Trapping of a Metal Hydride Molecule

arXiv:2512.22350v2 Announce Type: replace-cross Abstract: We demonstrate a three-dimensional magneto-optical trap (MOT) of a metal hydride molecule, CaH. We are able to scatter $\sim$$10^{4}$ photons with vibrational loss covered up to vibrational quantum number $\nu=2$. This allows us to laser slow the molecular beam near zero velocity with a "white-light" technique and subsequently load it into a radio-frequency MOT. The MOT contains $230(40)$ molecules, limited by beam source characteristics and predissociative loss of CaH. The temperature of the MOT is below one millikelvin. The predissociative loss mechanism could, in turn, facilitate controlled dissociation of the molecule, offering a possible route to optical trapping of hydrogen atoms for precision spectroscopy.

12.
arXiv (CS.CL) 2026-06-11

Adaptive Multi-Resolution Procedural Knowledge Compression for Large Language Models

Large language models (LLMs) are widely used to tackle complex tasks with autonomous workflows. Recently, reusable natural language skills have emerged as a popular paradigm to inject procedural knowledge into LLM applications. Since popular skills are often invoked repeatedly, placing their full text in every context significantly increases prefill cost and latency. While text compression techniques have the potential to solve this problem, most existing methods are designed to compress factual knowledge in documents instead of procedural knowledge, making them insufficient for skill compression. In this paper, we argue that an effective skill compression method should: 1) preserve logical dependencies among workflows and tool protocols, 2) enable lightweight, offline compression for frequently updated community skills, and 3) be adaptable to varying complexities across skills. To address this, we present SKIM (SKIll coMpression), an adaptive multi-resolution soft token compression framework for procedural skills. Depending on the complexity of each skill, SKIM creates different numbers of soft tokens that not only improve the efficiency of LLM inference, but also preserve the effectiveness of skill usage. Experiments indicate that SKIM compresses skills to 30 to 60 percent of their original token length while preserving task performance better than existing compression methods.We have released our code at https://github.com/bebr2/SKIM .

13.
medRxiv (Medicine) 2026-06-23

Unscreenable: The Burden, Structure, and Analytic Consequences of "Unable to Assess" Delirium Documentation in the Intensive Care Unit

Objective: To quantify the burden, structure, and downstream analytic consequences of "Unable to Assess" (UTA) delirium documentation in the intensive care unit (ICU). Design: Retrospective cross-sectional and repeated-measures study. Setting: A single US academic medical center (Medical Information Mart for Intensive Care IV [MIMIC-IV], 2008-2019). Patients: 72,944 adult ICU stays with at least 1 delirium screen. Interventions: None. Measurements and Main Results: Among 610,632 screens, 130,455 (21.4%; 95% CI, 21.0%-21.8%) were recorded as UTA, exceeding the 119,052 (19.5%) scored positive. The UTA fraction rose from 2.0% at a Richmond Agitation-Sedation Scale (RASS) score of 0 to 97.8% at RASS -4; 22.0% of UTA screens occurred in arousable patients, where UTA was associated with mechanical ventilation (odds ratio [OR], 3.43; 95% CI, 3.17-3.71) and non-English primary language (OR, 3.74; 95% CI, 3.43-4.08). Building the delirium label three ways from the same patients shifted prevalence modestly (32.1% to 30.8%) and prediction (area under the curve, 0.737 to 0.719) but most affected the delirium-mortality association: in a baseline-adjusted model the OR was 4.12 (95% CI, 3.88-4.36) under complete-case handling and fell to 2.16 (95% CI, 2.06-2.27) when UTA was recoded as negative. UTA was recoverable from the observed clinical state (area under the curve, 0.95). Conclusions: In this ICU cohort, Unable to Assess was the most common recorded delirium result other than Negative, exceeding positive screens; recoding it as negative roughly halved the apparent delirium-mortality association by relabeling deeply sedated, high-mortality patients. Delirium datasets should preserve and report UTA, whose concentration among arousable non-English-speaking patients is a measurable equity target.

15.
arXiv (CS.AI) 2026-06-25

Agent-as-a-Router: Agentic Model Routing for Coding Tasks

arXiv:2606.22902v2 Announce Type: replace Abstract: Real-world users typically have access to multiple Large Language Models (LLMs) from different providers, and these LLMs often excel at distinct domains, yet none dominate all. Consequently, routing each task to the most suitable model becomes critical for both performance and cost. Existing routers treat this as a static, one-off classification problem. However, we identify the performance bottleneck for these routers as information deficit: simply augmenting a vanilla LLM router with performance statistics at the task-dimension level yields a 15.3% relative gain, surpassing a heuristic router built on the same dimension-level priors. Motivated by this finding, we propose Agent-as-a-Router, a framework that formalizes routing as a C-A-F loop (Context->Action->Feedback->Context). It closes the information gap by accumulating execution-grounded experience during deployment. We instantiate this framework as ACRouter, composed of an Orchestrator, a Verifier, a Memory module, and introduce CodeRouterBench, an evaluation environment comprising ~10K task instances with verified scores from 8 frontier LLMs, enabling regret-based router comparison on streaming tasks. Experiments show that ACRouter achieves the lowest cumulative regret on in-distribution tasks and generalizes to out-of-distribution agentic-programming tasks, demonstrating that our routing framework actively closes the information gap. Codes and benchmarks are released at https://github.com/LanceZPF/agent-as-a-router.

16.
arXiv (CS.LG) 2026-06-16

Machine learning enables roughness-driven inverse design of milling processes

arXiv:2606.16032v1 Announce Type: cross Abstract: Interest in applying data-driven approaches in manufacturing has grown significantly, particularly for mapping complex, high-dimensional relationships. The milling process is one area where predictive models can link influential parameters to surface roughness metrics prior to in situ operations. While this approach offers clear advantages, it faces challenges due to limited datasets and robustness issues in inverse design paradigms. To address these challenges, this paper proposes a machine learning (ML)-based framework for the inverse design of the surface milling process, with a focus on surface roughness as the design objective. The framework employs forward training of two ML models, a deep neural network (DNN) and a random forest (RF) ensemble, both developed using a high-fidelity synthetic dataset generated from a computational simulation framework. These trained models are integrated into a Bayesian optimization (BO) procedure to overcome the multiplicity problem arising from the many-to-one mapping inherent in the dataset. The approach identifies top-performing milling process configurations, considering both process and tool parameters, and presents them from the full solution space. The models achieve average relative errors below 5% when compared to reference results, thereby demonstrating the robustness and reliability of the proposed methodology.

17.
arXiv (CS.LG) 2026-06-15

MOSIC: Model-Agnostic Optimal Subgroup Identification with Multi-Constraint for Improved Reliability

arXiv:2504.20908v3 Announce Type: replace Abstract: Current subgroup identification methods typically follow a two-step approach: first estimate conditional average treatment effects and then apply thresholding or rule-based procedures to define subgroups. While intuitive, this decoupled approach fails to incorporate key constraints essential for real-world clinical decision-making, such as subgroup size and propensity overlap. These constraints operate on fundamentally different axes than CATE estimation and are not naturally accommodated within existing frameworks, thereby limiting the practical applicability of these methods. We propose a unified optimization framework that directly solves the primal constrained optimization problem to identify optimal subgroups. Our key innovation is a reformulation of the constrained primal problem as an unconstrained differentiable min-max objective, solved via a gradient descent-ascent algorithm. We theoretically establish that our solution converges to a feasible and locally optimal solution. Unlike threshold-based CATE methods that apply constraints as post-hoc filters, our approach enforces them directly during optimization. The framework is model-agnostic, compatible with a wide range of CATE estimators, and extensible to additional constraints like cost limits or fairness criteria. Extensive experiments on synthetic and real-world datasets demonstrate its effectiveness in identifying high-benefit subgroups while maintaining better satisfaction of constraints.

18.
arXiv (CS.AI) 2026-06-24

JupOtter: Cell-Level Bug Detection in Jupyter Notebooks

arXiv:2606.23877v1 Announce Type: cross Abstract: Jupyter Notebooks are an increasingly popular coding environment used across many domains, especially in Python-based data science and scientific computing. Originally used for prototyping and interactive exploration, notebooks are increasingly used to develop more complex programs, leading to a rapid rise in buggy notebooks on platforms like GitHub. To address this trend, we present JupOtter, a bug detection system designed specifically for Jupyter Notebooks. JupOtter features three novel contributions: (1) a notebook-specific tokenization strategy that preserves cell structure, (2) a cell-level bug prediction technique, and (3) a new labeled dataset, OtterDataset, containing over 21,000 notebooks annotated for fine-grained cell-level bug detection. JupOtter achieves cell-level bug detection F1 scores that surpass static analyzers and large language models in two out of three evaluation datasets.

19.
arXiv (CS.AI) 2026-06-18

Improving Human-Robot Teamwork in Urban Search and Rescue Through Episodic Memory of Prior Collaboration

arXiv:2606.18836v1 Announce Type: cross Abstract: Effective human-robot teamwork requires robots to adapt to partners, situations, and task dynamics from the start of an interaction. In the MATRX Urban Search and Rescue (USAR) environment, people can externalize collaboration patterns (CPs) they discover during teamwork through a chat and reflection interface. We study whether a robot can use such prior team experience to become a better teammate in future interactions. To this end, we represent historical CPs as knowledge-graph episodic memories and use graph representation learning with a node-classification objective to identify a representative and effective memory for reuse. We then initialize the robot with this memory before a new collaboration episode begins. Across 20 participants and 160 round-level observations, initializing the robot with a single automatically selected prior CP increases rescue success from 25.7% to 41.3% and reduces average task time by 283 seconds. The strongest gains appear at the beginning of interaction, suggesting that reusable episodic memory can help robots enter collaboration with more effective task knowledge and support smoother early teamwork.

20.
arXiv (CS.AI) 2026-06-16

Rescaling Confidence: What Scale Design Reveals About LLM Metacognition

arXiv:2603.09309v2 Announce Type: replace Abstract: Verbalized confidence, in which LLMs report a numerical certainty score, is widely used to estimate uncertainty in black-box settings, yet the confidence scale itself (typically 0–100) is rarely examined. We show that this design choice is not neutral. Across six LLMs and three datasets, verbalized confidence is heavily discretized, with more than 78\% of responses concentrating on just three round-number values. To investigate this phenomenon, we systematically manipulate confidence scales along three dimensions: granularity, boundary placement, and range regularity, and evaluate metacognitive sensitivity using $meta-d'$. We find that a 0–20 scale consistently improves metacognitive efficiency over the standard 0–100 format, while boundary compression degrades performance and round-number preferences persist even under irregular ranges. These results demonstrate that confidence scale design directly affects the quality of verbalized uncertainty and should be treated as a first-class experimental variable in LLM evaluation.

21.
arXiv (CS.CL) 2026-06-12

Rigel: Reverse-Engineering the Metal 4.1 Tensor Compute Path on the Apple M4 Max GPU

Apple's Metal 4.1 exposes a tensor compute path: the Metal Performance Primitives (MPP) matmul2d operation over cooperative_tensor fragments, whose interface is documented but whose hardware behavior is deliberately hidden. The specification states which data-type rows are supported, never whether they are hardware-accelerated, where the operation physically executes, what its accumulator width is, or how it partitions matrix fragments across threads. We present Rigel, an empirical characterization of this path on a single Apple M4 Max (a pre-neural-accelerator generation). Using a checksum-gated, provenance-tracked microbenchmark harness, Rigel recovers eleven facts the v4.1 specification hides or contradicts. The headline finding: the Metal 4.1 fp8 (E4M3) matmul2d is emulated, not accelerated: it sustains 0.94x the throughput of fp16 despite reading half the operand bytes, so on M4 it is a memory-footprint feature, not a performance feature. We further show, via a three-signal triangulation (throughput ceiling, comparison against simdgroup_matrix, and per-rail power attribution), that matmul2d executes entirely on the GPU shader cores with no dedicated matrix datapath and no evidence of Apple Neural Engine routing; that it accumulates in >=fp32; and we reconstruct the opaque 8x8 cooperative_tensor fragment layout Apple documents nowhere. Acting on the characterization, a hand-fused GEMM + bias + GELU kernel beats the decomposed path by +6.5-12.9% in the cache-resident regime. All findings are reproducible from committed MIT-licensed code and per-cell CSVs.

22.
arXiv (CS.CV) 2026-06-18

SC3-Eval: Evaluating Robot Foundation Models via Self-Consistent Video Generation

Evaluating generalist robot manipulation policies in the real world is expensive, slow, and difficult to scale. Action-conditioned video world models offer a scalable alternative by simulating policy rollouts. Autoregressive rollouts accumulate compounding errors, observations across multiple camera views must remain mutually consistent, and the evaluator must generalize to policies whose behaviors lie outside the training distribution. We address these challenges with SC3-Eval, a self-consistent video generation recipe that adapts a pre-trained video foundation model into an accurate policy evaluator by enforcing three complementary forms of consistency. First, forward-inverse dynamics consistency jointly trains the model to predict frames from actions and to recover actions from frames, anchoring generated rollouts to a physically plausible action manifold and counteracting the drift a forward-only model cannot penalize. Second, cross-view consistency trains the model to inpaint each camera view from the other, keeping the multi-camera observation coherent over long rollouts without any explicit memory mechanism. Third, test-time consistency reuses the inverse dynamics mode at inference as a per-action-chunk uncertainty signal that terminates rollouts whose generated frames drift away from the requested actions. We also demonstrate SC3-Eval rollouts reproduce the failure modes that policies exhibit in real-world rollouts, supporting fine-grained diagnostic comparison rather than aggregate ranking alone. Across seven real-world vision-language-action policies, SC3-Eval attains a closed-loop Pearson correlation of $0.929$ and MMRV of $0.119$, outperforming three strong prior video-model-based baselines, and generalizes to new tasks.

23.
arXiv (CS.LG) 2026-06-15

Deep Learning and Elicitability for McKean-Vlasov FBSDEs With Common Noise

arXiv:2512.14967v2 Announce Type: replace Abstract: We present a novel numerical method for solving McKean–Vlasov forward–backward stochastic differential equations (MV–FBSDEs) with common noise, combining Picard iterations, elicitability and deep learning. The key innovation involves elicitability to derive a pathwise loss function, enabling efficient training of neural networks to approximate both the backward process and the conditional expectations arising from common noise, without requiring computationally expensive nested Monte Carlo simulations. The mean-field interaction term is parameterized via a recurrent neural network trained to minimize an elicitable score, while the backward process is approximated through a hybrid feedforward and recurrent network representing the decoupling field. We validate the algorithm on a systemic-risk inter-bank borrowing and lending model, where analytical solutions exist, demonstrating accurate recovery of the true solution. We further extend the model to quantile-mediated interactions, showcasing the flexibility of the elicitability framework beyond conditional means or moments. Finally, we apply the method to a non-stationary Aiyagari–Bewley–Huggett economic growth model with endogenous interest rates, illustrating its applicability to complex mean-field games without closed-form solutions.

24.
arXiv (CS.AI) 2026-06-16

InstantForget: Update-Free Backdoor Unlearning with Inference-Time Feature Reset

Authors:

arXiv:2606.15730v1 Announce Type: cross Abstract: Backdoor unlearning aims to remove a malicious trigger behavior from a deployed model while preserving clean utility. We study the update-free inference-time setting, where model parameters remain frozen. First, we audit a common projection assumption under oracle paired clean and triggered features. Projection succeeds mainly on BadNets and leaves WaNet, Blended, and SIG at 0.683, 0.888, and 0.941 ASR on CIFAR-10 ResNet-18. This failure is not explained by spectral compactness, spatial locality, or subspace misalignment. It is predicted by a logit-triplet gap involving the target margin, target-logit drop, and non-target logit rise. We then introduce InstantForget, a clean-calibrated gated reset that flags anomalous features with a Mahalanobis score and moves only flagged features toward a neutral non-target representation. With one fixed operating point selected on held-out triggered validation, InstantForget reduces average ASR to 0.071 across four non-adaptive CIFAR-10 triggers without triggered samples or parameter updates at deployment. It also reaches 0.981 detection AUROC and transfers to six of eight tested backbones. Reported failures under WaNet, ModelNet10 point blend, two backbone geometries, and adaptive feature-compactness attacks define the method's scope.

25.
arXiv (quant-ph) 2026-06-16

High-dimensional coherence to entanglement transduction under canonical noise

arXiv:2606.16695v1 Announce Type: new Abstract: We develop an analytical framework for coherence-to-entanglement conversion in bipartite high-dimensional quantum systems, so-called qunits. An arbitrary coherent input qunit is coupled to an incoherent ancilla through a generalized controlled-shift operation, producing a maximally correlated bipartite state. By analyzing the partial transpose of the output state, we establish an exact dimension-independent connection between the input coherence and the generated entanglement. We then study how this conversion is affected by three standard noise processes applied after the conversion step: phase damping, global depolarizing noise, and independent amplitude damping. The resulting expressions show that these channels degrade entanglement in qualitatively different ways. Phase damping leads to a uniform attenuation of the entanglement generated from coherence, depolarizing noise introduces pairwise thresholds associated with entanglement sudden death, and amplitude damping produces an asymmetric decay governed by relaxation toward the ground state. For maximally coherent inputs, the general results reduce to simple closed-form behavior, allowing direct comparison of the three noise mechanisms as the system dimension increases. In particular, global depolarizing noise exhibits a dimension-dependent sudden-death threshold, while amplitude damping leads to a smooth suppression in the maximally coherent case. These results provide useful analytical benchmarks for high-dimensional resource conversion and for assessing noisy entanglement generation in qudit-based quantum-information settings.