Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (quant-ph) 2026-06-19

Anomalous magneto-optical response at $\mathrm{RuO_2 / WSe_2}$ van der Waals interface

arXiv:2606.20262v1 Announce Type: cross Abstract: Ruthenium dioxide ($\mathrm{RuO_2}$) has been proposed as an altermagnetic candidate, although its magnetic ground state remains controversial. Here, we probe weak interfacial magnetic states at the surface of (001)-oriented $\mathrm{RuO_2}$ films using the magnetic proximity effect (MPE) in a van der Waals heterostructure consisting of monolayer tungsten diselenide ($\mathrm{WSe_2}$) atop $\mathrm{RuO_2}$. Temperature-dependent magneto-optical spectroscopy reveals an anomalous excitonic energy shift and a deviation from conventional Varshni behavior below 55 K that are absent in an encapsulated $\mathrm{WSe_2}$ control sample. The anomalous shift reverses sign upon field cooling with opposite magnetic field polarity, indicating a magnetic origin. Polarization-resolved measurements further show a nearly field-independent and fluctuating valley splitting in $\mathrm{WSe_2 / RuO_2}$ in strong contrast to the conventional linear Zeeman splitting observed in the control bare $\mathrm{WSe_2}$ sample. These results suggest that the valley states are governed predominantly by interfacial exchange fields associated with weak surface magnetic states in $\mathrm{RuO_2}$, which do not produce a conventional linear Zeeman response within the applied magnetic field range. Importantly, this approach enables direct optical probing of emergent surface magnetism without introducing an additional ferromagnetic layer, positioning MPE-based optical probing as a tool for investigating weak surface magnetism and offering new possibilities for studying magnetic materials with controversial magnetic states.

02.
arXiv (CS.LG) 2026-06-18

Latent-Conditioned Parameterized Quantum Circuits as Universal Approximators for Distributions over Quantum States

arXiv:2605.28690v3 Announce Type: replace-cross Abstract: Many applications in quantum simulation, quantum chemistry, and quantum machine learning require not a single quantum state but an ensemble of states characterizing the heterogeneity of a target system. Preparing such ensembles state-by-state is prohibitive in both variational and fault-tolerant settings, thereby motivating a generative modeling approach. We introduce latent-conditioned parameterized quantum circuits (LPQCs), a hybrid quantum-classical framework in which classical neural networks map a latent variable sampled from a prior distribution to the parameters of a parameterized quantum circuit. We prove that LPQCs are universal approximators for probability measures over density operators in the 1-Wasserstein distance, extending classical universal approximation theorems to the quantum-distribution setting. We additionally introduce a multimodal latent prior and a mixture-of-experts circuit architecture, and show empirically that the latent-conditioned parameterization alleviates the barren plateau problem during optimization, a behavior for which we provide rigorous partial guarantees. Numerical experiments validate the framework on a synthetic multi-cluster ensemble of mixed quantum states and on a QM9-derived ensemble of 3-D molecular structures. In these tasks, LPQC outperforms recent quantum generative baselines and matches the generation quality of a classical neural-network baseline, while requiring an output dimension that grows only linearly with the number of qubits rather than exponentially. By leveraging classical expressivity in the latent space, LPQCs offer a tractable route to quantum generative modeling.

03.
arXiv (quant-ph) 2026-06-19

Quantum correlations in QBism's reconstruction program

arXiv:2606.07485v2 Announce Type: replace Abstract: QBism recasts quantum theory as a normative framework for an agent's probability assignments, with the Born rule taking the form of a consistency condition known as the Urgleichung. Motivated by this perspective, qplex theories provide a broader class of probabilistic models in which the sets of valid states and measurements are constrained by QBist-inspired geometric conditions. While qplexes have been extensively studied for single systems, their implications for bipartite correlations remain largely unexplored. In this work, we investigate bipartite correlations in qplex theories by expressing joint expectation values as inner products between suitably defined $C$-vectors. This geometric formulation allows Bell-type inequalities to be studied as optimization problems over qplex-compatible probability assignments. We first analyze the CHSH scenario and show that the shared inner-product structure of the $C$-vectors restricts the maximal value to the Tsirelson bound $2\sqrt{2}$. We then turn to the three-outcome CGLMP inequality $I_{2233}$ and find that the same qplex-derived norm and inner-product constraints allow a violation of up to $\leq 2+2\sqrt(3)/3 \approx 3.1547$ versus the quantum maximum of $\approx 2.8729$, thereby exhibiting super-quantum correlations. These results show that qplex geometry captures enough structure to reproduce an important quantum bound in the two-outcome case, but not enough to recover the full set of quantum correlation constraints. The analysis therefore suggests that additional principles are needed to complete the QBist reconstruction of quantum theory.

04.
medRxiv (Medicine) 2026-06-24

Repetitive Transcranial Magnetic Stimulation over Primary Somatosensory Cortex for Upper Limb Function in Stroke: An Exploratory Randomized Controlled Trial

Background: Stroke often causes Upper Limb (UL) functional impairments. The Primary Somatosensory Cortex (S1) plays an important role in motor learning. Repetitive Transcranial Magnetic Stimulation (rTMS) over S1 could enhance UL recovery. We aimed to explore its preliminary effects on UL motor activity and function post-stroke. Methods: An exploratory parallel-group randomized controlled trial in people with chronic stroke (>3 months) and moderate hemiparesis was conducted. Participants received 20 sessions of active or sham 5Hz rTMS over affected S1, with Robot-Assisted Therapy and Task-Oriented Training, 5 days/week for 4 weeks. The primary endpoint was UL motor activity (Action Research Arm Test, ARAT). Secondary measures were the UL Fugl-Meyer Assessment (UL-FMA) and sensory outcomes. Results: The baseline-adjusted mean difference (MD) in ARAT was 4.05 points [0.78, 7.33], favoring active stimulation. Secondary measures did not favor active stimulation (UL-FMA: MD = 2.62 [-1.51, 6.76]; sensory outcomes showed no between-group differences). Conclusion: High-frequency rTMS over S1 may enhance UL motor activity (ARAT), but no evidence for motor impairment (UL-FMA) or sensory domains was found. Compensation rather than restoration may underlie this improvement. Stimulation targets should match the intended recovery domain, although larger trials are needed to confirm these preliminary findings.

05.
arXiv (CS.LG) 2026-06-12

GF-DiT: Scheduling Parallelism for Diffusion Transformer Serving

arXiv:2606.13501v1 Announce Type: cross Abstract: Diffusion Transformers (DiTs) have become the dominant architecture for image and video generation, creating growing demand for efficient DiT serving. Existing systems assign each request a fixed parallel configuration throughout its lifetime. However, DiT workloads exhibit substantial heterogeneity across requests, execution stages, and system conditions, making static parallelism inefficient and often leading to poor GPU utilization and degraded service quality. This paper argues that DiT serving should treat GPU parallelism as a first-class schedulable resource. We present GF-DiT, a policy-programmable runtime for elastic DiT serving that dynamically adapts the parallelism of running requests according to workload demands and service objectives. GF-DiT introduces an asynchronous execution abstraction that decomposes requests into independently schedulable trajectory tasks and enables online GPU reallocation. To make elastic parallelism practical, GF-DiT further proposes group-free collectives, a lightweight communication abstraction that supports low-overhead online formation and reconfiguration of arbitrary execution groups. We implement GF-DiT in vLLM-Omni and evaluate it on representative image and video diffusion workloads. Compared with fixed-pipeline execution with static parallelism, GF-DiT improves throughput by up to 6.01$\times$, reduces mean latency by up to 95%, lowers SLO violation rates by up to 90%, and reduces communication-group setup overhead from 778 ms to approximately 60 $\mu$s.

06.
medRxiv (Medicine) 2026-06-11

Impact of Out-Migration and Remittances on Food Consumption Outcomes among Rural Households in Tigray, Ethiopia

Authors:

This study examines the effects of rural out-migration and remittance inflows on food consumption outcomes among rural households in the Tigray region of Ethiopia. Utilizing household survey data collected from 521 rural households across three distinct Weredas (districts) (Tahtay Maichew, Kola Tembien, and Kilte-awlaelo). A Binary Probit model was employed to identify factors influencing migration decisions, while an Endogenous Switching Regression (ESR) model was used to estimate the impact of migration on food consumption outcomes while controlling for selection bias and unobserved heterogeneity. Food security was measured using the Food Consumption Score (FCS) and dietary diversity indicators. The empirical results reveal that severe food insecurity is widespread, with over 60% of all surveyed households falling into the "Poor" food consumption category. Descriptive baseline comparisons show that migration and remittance transfers marginally shift the raw average FCS upward from 23.86 to 25.48. However, this impact is profoundly nuanced: remittances serve as an immediate consumption-smoothing safety net but run parallel to a "labor-lost" constraint that reduces own-production capacities, forcing households to rely increasingly on market purchases for staple foods. The findings reveal that migration creates short-term labor shortages in agricultural production; however, remittance inflows substantially improve household food consumption frequencies, particularly for pulses, vegetables, and other nutrient-rich foods. After accounting for self-selection bias and unobserved traits, the rigorous ESR estimates indicate that migration increases the Food Consumption Score of participating households by an average Treatment Effect on the Treated (ATT) of 10.75 points, shifting them into more secure dietary tiers. Moreover, remittances help households mitigate the adverse effects of drought and other shocks by relaxing liquidity constraints and supporting both food purchases and agricultural investments. The study recommends establishing target food security safety nets for non-remittance households, promoting scale-appropriate labor-saving agricultural technologies, expanding traditional communal labor-sharing innovations, and boosting irrigation and agricultural input support programs to enhance rural food security and livelihood resilience.

07.
arXiv (CS.CV) 2026-06-16

Avoiding Exponential Blow-Up in Distributive Lattice Submodular Minimization

Authors:

Submodular function minimization has gained a lot of interest in recent years. They are highly applicable in the area of Computer Vision and Machine Learning. Often such applications require to work with submodular functions defined on distributive lattice. Current best way of dealing with it is using a transformation which extrapolates the submodular function for the respective boolean lattice. It makes optimization system too inefficient due to enlargement of the working space. Quantitatively, the expanded space has additional exponential (in set size) number of elements. We propose a generic framework for dealing with distributive lattice which only works within distributive lattice. Our framework allows one to use already established submodular function minimization algorithms for boolean lattice. In our experiment, we show the huge improvement in terms of running time over tranditional methods for handling distributive lattice.

08.
arXiv (CS.CV) 2026-06-11

A Scalable PyTorch Abstraction for Multi-GPU Gaussian Splatting

Gaussian splatting methods have become increasingly popular for neural reconstruction of the real world. However, they are often limited in scale and resolution due to compute and memory constraints. We present a multi-GPU Gaussian splatting approach that scales reconstruction to higher resolutions and larger scenes while abstracting away the code complexity typically associated with distributing a model. To accomplish this, we propose a PyTorch backend that distributes the Gaussian parameters and splatting operators across GPUs via CUDA unified memory and NVLink. Because distribution occurs at the operator level, the model code requires no explicit cross-device communication. More broadly, the backend exposes multiple GPUs as an aggregate PyTorch device and supports other PyTorch operators. We demonstrate city-scale reconstructions with street-level detail consisting of over 1 billion Gaussian splats, more than 25 times as many as the current state of the art.

09.
arXiv (CS.LG) 2026-06-11

A Data-Centric Framework for Detecting and Correcting Corrupted Labels

arXiv:2606.11699v1 Announce Type: new Abstract: The performance of machine learning and deep learning models largely depends on the quality of the training data. However, the quality of the real-world datasets is often compromised by noisy labels, which can substantially degrade model accuracy and reliability. To address this challenge, we propose Relabeler, an end-to-end data-centric framework for detecting and correcting corrupted labels. For corrupted label detection, Relabeler jointly leverages both local and global relationships among data instances to identify potentially noisy samples. After detecting suspicious instances, Relabeler further performs label correction by estimating the most probable clean label for each instance based on both its input features and observed noisy label. Extensive experiments across multiple datasets, noise types, and noise rates demonstrate that Relabeler consistently outperforms state-of-the-art baselines, achieving up to 58% improvement in label correction precision and 6% improvement in downstream task performance.

10.
arXiv (quant-ph) 2026-06-24

Linear optical Bell state measurement for rotation-symmetric cat codes

arXiv:2606.22832v2 Announce Type: replace Abstract: Rotation-symmetric cat (RS-cat) codes are a bosonic-code platform for quantum information processing, combining finite-energy realizability with robustness against photon loss through their discrete rotational symmetry. For applications in long-distance quantum communication and fusion-based quantum computation (FBQC), efficient Bell state measurement (BSM) is a key primitive. In this work, we consider a BSM protocol for RS-cat codes using only a half beam splitter (HBS) and photon-number-resolving detectors (PNRDs). By exploiting the characteristic photon-number structure induced by the discrete rotational symmetry of RS-cat codes, our protocol extracts both photon-number modulo and phase information for Bell-state discrimination. We show that, under ideal loss-free conditions, the proposed BSM protocol becomes deterministic for arbitrary symmetry order $N$ for sufficiently large amplitudes $\alpha$. We further numerically evaluate the success probability under photon loss and identify the loss regime in which higher-order RS-cat codes provide an advantage. Finally, we show that post-selection can enhance the success probability.

11.
arXiv (CS.CV) 2026-06-12

ECA: Efficient Continual Alignment for Open-Ended Image-to-Text Generation

Incremental Learning (IL) for Open-ended Image-to-Text Generation (OpenITG) enables models to continuously generate accurate, contextually relevant text for new images while preserving previously acquired knowledge. Unlike prior studies, this paper addresses a more practical scenario in which the predominant category of visual data shifts over time as environments evolve. In this context, we introduce a new notion of continual alignment, which incrementally adapts the alignment module within pre-trained VLMs to preserve high-quality cross-modal representations. Based on this idea, we propose Efficient Continual Alignment (ECA), a novel exemplar-free IL approach for OpenITG. The key challenge is enabling the model to acquire new, task-specific features while minimizing interference with the established alignment without accessing raw data from previous tasks. To address this, ECA employs three core mechanisms: a Mixture of Query (MoQ) module that adapts task-specific query tokens, a Fisher Dynamic Expansion (FeDEx) that dynamically expands model structure based on a Fisher Information Matrix (FIM)-based metric, and an embedding dictionary with Dictionary Replay (DR) to retain past knowledge. To evaluate ECA's performance, we construct four new IL OpenITG benchmarks that better reflect real-world scenarios. Experimental results demonstrate that ECA significantly mitigates catastrophic forgetting and improves IL performance compared to baseline methods. Code and benchmarks are available at https://github.com/Snowball0823/ECA.

12.
arXiv (quant-ph) 2026-06-19

Topological Quantum Interferometry

arXiv:2606.19730v1 Announce Type: new Abstract: Structured light provides high-dimensional Hilbert spaces holding tremendous potential for fundamental quantum optics and quantum technologies. However, existing characterization methods, like Hong-Ou-Mandel (HOM) interference, typically assume perfectly tuned conditions, overlooking the geometric physics governing spatial mode evolution. Here, we establish topological quantum interferometry driven by an interaction-based geometric phase, the exchange Berry phase (BPX). Our formalism generalizes $q$-plate state generation and characterization to arbitrary topological charges and (de)tuning conditions, demonstrating that BPX acts as a geometric marker governing spatial interference. We show BPX serves as a deterministic control parameter, decomposing two-photon spatial patterns into geometry-dictated fundamental modes. This mapping reveals topological invariants and phase singularities that function as a non-tomographic witness for state dimensionality estimation, circumventing full-state reconstruction. Being device-independent and highly scalable, this approach enables scalable high-dimensional characterization and topologically protected state selection, with direct applicability to quantum metrology and high-capacity quantum networks.

13.
arXiv (CS.CL) 2026-06-16

Beyond Retrieval: Learning Compact User Representations for Scalable LLM Personalization

Personalizing large language models requires adapting model behavior to individual users while preserving robustness and deployment-scale efficiency. Existing approaches typically personalize LLMs either at the input level, by retrieving user histories or constructing profile prompts, or at the parameter level, by maintaining user-specific parameter-efficient modules. The former makes personalization sensitive to retrieval quality and prompt design, whereas the latter incurs storage and maintenance costs that grow with the user population. To address these limitations, we propose TAP-PER (Temporal Attentive Prefix for PERsonalization), a prefix-based framework that encodes user preferences as learnable representations, eliminating explicit prompt construction and replacing heavy per-user adapters with lightweight user-state prefix embeddings. Inspired by personalized recommendation systems, TAP-PER decomposes user modeling into user-state and query-conditioned components, and incorporates temporal signals to capture the evolving nature of user interests. Experiments on six LaMP tasks show that TAP-PER consistently outperforms prompt-based and model-based baselines across classification, rating, and generation settings. Moreover, TAP-PER uses 130x fewer per-user parameters than OPPU and roughly half the total parameter footprint of PER-PCS at the 1,000-user scale, demonstrating that scalable LLM personalization can be achieved without explicit prompt construction or heavy per-user adapters.

14.
arXiv (CS.AI) 2026-06-17

No-Free-Fairness: Fundamental Limits and Trade-offs in Learning Systems

Authors:

arXiv:2606.17810v1 Announce Type: cross Abstract: In this paper, we establish a set of theoretical impossibility results, termed the No-Free-Fairness theorems, that identify three fundamental sources of disparity in learning systems. First, we show that when a task exhibits irreducible cost on a subgroup, any decision rule must trade off overall performance with disparity, yielding an inherent fairness–cost frontier. Second, we prove that even in ideal, noise-free settings where a perfectly fair and accurate solution exists, finite-sample learning alone induces nontrivial subgroup disparity, ruling out distribution-free fairness guarantees. More seriously, enforcing strict relative fairness creates a statistical bottleneck: achieving low cost may require exponentially many samples. Third, we show that limitations of the model class can independently induce disparity: if the model cannot represent accurate solutions for a subgroup, fairness remains unattainable regardless of data or training procedure. Overall, these results demonstrate that unfairness is not solely a consequence of biased data or suboptimal optimization, but arises from the intrinsic structure of decision problems, the constraints of finite data, and the expressivity of models. Our framework applies broadly beyond standard supervised learning, and suggests that achieving fairness requires explicit trade-offs and should be treated as a core design consideration.

15.
arXiv (CS.AI) 2026-06-19

BIM-Edit: Benchmarking Large Language Models for IFC-Based Building Information Modeling

arXiv:2606.20146v1 Announce Type: new Abstract: Large language models (LLMs) are increasingly applied to computer-aided design (CAD) to generate design artifacts from textual instructions. In engineering practice, this requires more than creating new geometry, models must also understand existing scenes, edit them correctly, and preserve semantics and relations. However, many CAD benchmarks focus on creating new models rather than editing existing ones, and mostly evaluate geometric correctness. We introduce BIM-Edit, a benchmark for evaluating LLMs on natural-language editing of Building Information Models (BIM) represented in the Industry Foundation Classes (IFC) format. BIM provides a challenging testbed because building models encode geometry together with semantic and relational structure. BIM-Edit contains 324 editing tasks spanning 11 realistic building models and 36 synthetic scenes. Tasks are expressed using three instruction categories - direct, spatial, and topological - covering both explicit and scene-grounded edits. We evaluate outputs along three dimensions: geometric accuracy, semantic validity, and topological consistency. Across evaluated LLMs, the best-performing model achieves only 49.5% average score across the three metrics, and no model fully solves more than 3.4% of tasks. These results demonstrate a substantial gap between current LLM capabilities and the requirements of structured engineering design workflows.

16.
arXiv (CS.AI) 2026-06-16

Resilient Consensus in Agentic AI

arXiv:2606.15024v1 Announce Type: cross Abstract: Large language model (LLM) agents are increasingly deployed in multi-agent systems where they must coordinate and agree on shared decisions. We ask whether classical resilient consensus theory, developed for deterministic agents, transfers to LLM agents that may behave adversarially. Framing LLM agreement as a Byzantine consensus game, we run controlled experiments on complete and general communication graphs. We find that prompted LLM agents fail to reach agreement that is achievable in principle: consensus can fail even in settings where classical theory guarantees that a convergent algorithm exists, and this failure persists across temperatures and horizons. At the same time, wrapping the agents with classical resilient consensus filters improves agreement. The benefit of filtering depends on how much robustness the underlying topology already provides. Our results suggest that classical resilient consensus theory is a useful lens for the safety of agentic AI.

17.
arXiv (CS.CV) 2026-06-19

Cinematic Compositing Using Character-Environment-Harmonized Video Generation Models

Cinematic compositing aims to integrate green-screen characters into novel environments while maintaining physical and photometric realism. Previous methods often fail to capture the complex bidirectional interactions between characters and their surroundings, which we characterize as Character-to-Environment (C2E) physical interaction and Environment-to-Character (E2C) lighting harmonization. To address this, we propose an end-to-end video diffusion framework that jointly models C2E and E2C interactions, specifically handling the challenges of interactive props. Our approach introduces a tri-mask-guided architecture with RGB-D joint denoising to ensure physically consistent interactions among the character, props, and environment. We further develop an efficient prior-driven data curation pipeline to construct high-quality relighting pairs without expensive rendering. Finally, a reference-conditioned mechanism enables controllable environment synthesis and precise prop replacement. Extensive experiments demonstrate that our framework significantly outperforms existing methods in cinematic-quality dynamic video compositing.

18.
arXiv (CS.CV) 2026-06-16

HiRo: A Compact Four-Directional Hierarchical Reservoir Token-Mixer for Efficient Image Classification

Recent image classification models must balance local feature modeling, cross-window interaction, and parameter efficiency. Many high-performing architectures rely on fully trainable token-mixers, which improve representation learning but increase parameter count, optimization complexity and computational cost. We propose a parameter-efficient image classification model called HiRo that integrates shifted-window partitioning with multi-directional hierarchical reservoir computing. Images are divided into non-overlapping patches (treated as tokens), linearly projected, normalized, and enriched with 2D sinusoidal positional encodings, then processed within local windows. Inside each window, tokens are scanned in four directions and passed through a two-stage slice-and-mix reservoir module. In the first stage, directional sequences are split into contiguous slices, each processed by its own fixed reservoir with a trainable closed-loop readout. The resulting slice outputs are summarized using the start, end, and mean representations, and then mixed by a second-stage fixed reservoir for each direction. The mixed slice representations are expanded back to the token level and fused with the first-stage outputs, after which the four directional outputs are realigned and averaged. Consecutive blocks alternate between regular and shifted windows to enable cross-window interaction, followed by layer normalization, a residual feed-forward network, and global pooling for classification. This design combines regular and shifted window partitioning with hierarchical multi-directional reservoirs to make an efficient local-to-cross-window token-mixing framework for image classification. Despite using under 1M trainable parameters and significantly lower memory and time than transformer-style baselines, HiRo also achieves 99.46%, 85.57%, and 59.10% accuracy on MNIST, CIFAR-10, and CIFAR-100, respectively.

19.
arXiv (CS.CL) 2026-06-11

Fanar-Sadiq: A Multi-Agent Architecture for Grounded Islamic QA

Large language models (LLMs) can answer religious knowledge queries fluently, yet they often hallucinate and misattribute sources, which is especially consequential in Islamic settings where users expect grounding in canonical texts (Qur'an and Hadith) and jurisprudential (fiqh) nuance. Retrieval-augmented generation (RAG) improves grounding, however, a single retrieve-then-generate pipeline is insufficient for diverse Islamic queries, including verbatim scripture, citation-grounded guidance, and rule-constrained computations such as zakat and inheritance. To address these challenges, we present Fanar-Sadiq, a bilingual Arabic-English Islamic QA system built on a multi-agent, tool-augmented architecture. It is a core component of the Fanar AI platform. Fanar-Sadiq routes Islamic queries to specialized modules within an agentic tool architecture. It supports intent-aware routing, retrieval-grounded fiqh answers with normalized citations and verification traces, exact verse lookup with quotation validation, and deterministic Sunni zakat and inheritance calculators with madhhab-sensitive branching. We evaluate the end-to-end system on public Islamic QA benchmarks and show strong effectiveness and efficiency. It is publicly accessible through an API and Web application and has received over 1.9M accesses in less than a year (https://api.fanar.qa/docs).

20.
arXiv (CS.CV) 2026-06-24

NavWM: A Unified Navigation World Model for Foresight-Driven Planning

Conventional visual navigation policies often struggle with myopic decision-making and mode collapse in complex environments. While world models offer a promising alternative, existing paradigms typically isolate perception, generation, and control, failing to capture their shared spatio-temporal dynamics. In this paper, we propose NavWM, a unified navigation world model that seamlessly integrates latent world reasoning, multimodal action prediction, and controllable visual generation. At its core, NavWM leverages latent world tokens to distill geometric and semantic priors, endowing the agent with robust structural understanding. To overcome the limitations of deterministic policies, we introduce an anchor-based multimodal trajectory forecasting framework that generates a diverse action space. This inherent diversity explicitly empowers the generative world model to act as a robust closed-loop planner, utilizing visual foresight to evaluate and select the optimal path. Extensive experiments across diverse robotics datasets demonstrate that NavWM significantly advances the state-of-the-art, delivering remarkable improvements in both high-fidelity future state generation and zero-shot navigation success.

21.
arXiv (CS.LG) 2026-06-15

SemPiper: Interactive Code Synthesis for Semantic Operators in Machine Learning Pipelines

arXiv:2606.14361v1 Announce Type: new Abstract: Machine learning (ML) pipelines require extensive data preparation, feature engineering, and integration across heterogeneous sources, making them tedious and error-prone to develop. While large language models (LLMs) have recently shown promise for assisting programming tasks, chat-based interfaces provide limited control over pipeline behavior and often produce code that is difficult to optimize or integrate into production systems. We demonstrate SemPipes, a novel programming model that extends ML pipelines with declarative, LLM-powered semantic data operators. SemPipes allows developers to specify high-level natural language instructions for data-centric operations, while seamlessly combining these operators with arbitrary Python code from standard data science libraries. For the semantic operators, it synthesizes specialized implementations at pipeline training time, conditioned on dataset characteristics and pipeline context, enabling the flexible yet controlled integration of LLM capabilities. We demonstrate SemPipes through SemPiper, an interactive interface that visualizes computational graphs of the pipelines, synthesized operator implementations, and optimization trajectories produced by an evolutionary search procedure. Attendees can explore three end-to-end scenarios, modify pipelines, inspect generated code, and observe how semantic operators are synthesized and iteratively optimized. The demonstration highlights how declarative semantic operators enable controllable, optimizable, and practical integration of LLMs into ML pipeline development.

22.
arXiv (CS.AI) 2026-06-16

Demystifying Variance in Circuit Discovery of LLMs

arXiv:2606.16920v1 Announce Type: cross Abstract: Circuit discovery is a key technique in mechanistic interpretability to pinpoint the model components that are crucial for performing a given task. Although the current state-of-the-art method (EAP-IG) performs well on the metric of (un)faithfulness, it suffers from substantial variability. This includes resampling variance, where the circuit changes when we probe with a new batch of data from the same distribution; rephrasing variance, where the discovered circuit shifts when the prompts are rephrased; and sample-wise variance, where a circuit with low population unfaithfulness exhibits large fluctuations in unfaithfulness across individual samples. This paper studies the roots of these variances. We demonstrate that CEAP, our new circuit discovery method that improves upon EAP-IG with a theoretical guarantee, can substantially lessen resampling variance. We further show that rephrasing variance arises because prompts with different templates tend to activate different circuits in the model. This leads us to argue that it may be challenging to find a comprehensive circuit that explains and controls the model's behavior on a task, which can be expressed in countless templates, suggesting that LLMs may be inherently hard to steer. We show that sparsity, which has been claimed to form more compact and interpretable task circuits, fails to solve this problem. Regarding sample-wise variance, we argue that it is largely benign: extremely poor unfaithfulness scores often stem from how unfaithfulness is defined, rather than from defects in the measured circuits. We show that the magnitude of unfaithfulness is affected by selective contribution scaling, a neural mechanism that accounts for the extremely poor scores sometimes observed.

23.
bioRxiv (Bioinfo) 2026-06-18

Identification of environmental factors and growth stages in the prediction of fibre yield and fibre quality traits in rain-grown cotton

Context Understanding how and when environmental conditions influence overall crop performance is crucial for optimising the development of genotypes to a specific breeding target environment. We focused on economically important traits of Australian rain-grown cotton including fibre yield and quality traits, which have not been investigated comprehensively. The aim of the study was to identify relevant environmental factors, and the timing and extent of their impact on rain-grown cotton production. Methods We used a data driven approach to analyse the relationship between ten climate related environmental factors across various plant growth stages and eight fibre yield and quality traits, using a large-scale field dataset of 9,283 records collected over 23 years at 4 locations, with 53 unique year-location combinations. We applied eight complementary statistical models including stepwise, penalised and Bayesian linear regression, regression-tree based ensemble methods and deep learning frameworks to (1) select the most essential environmental covariates affecting rain-grown cotton production, and (2) evaluate the predictive performance of these models. Results The environmental impacts on rain-grown cotton production were trait and growth-stage specific. Number of rainy days and solar radiation were identified as the most influential environmental factors for fibre yield traits, vapour pressure deficit at maximum daily temperature was the most influential factor for majority of fibre quality traits. However, each analysed trait was influenced by multiple environmental factors across multiple growth stages (rather than a single factor or a single growth stage). These influential covariates explained a wide range of variation in the traits, accounting for 5.8% to 68.2%. Using the best-fit random forest model, our findings revealed non-linear relationships between key environmental covariates and the traits. Conclusions Environmental factors at different rain-grown cotton growth stages are key determinants for the performance of end-of-season fibre yield and fibre quality parameters. These findings highlight the need to account for environment conditions when developing cotton varieties optimised for rain-grown production systems. Potential strategies are proposed whereby these key environmental factors can be used to increase the rate of genetic gain in rain-grown cotton production systems. Implications The results of this study will be crucial for future genetic evaluations and analyses of genotype-by-environment interaction effects in rain-grown cotton, which must account for the influence of the environment on plant performance. Furthermore, these methods can be applied to other species to identify critical growth stages and environmental factors which most influence crop performance.

24.
arXiv (CS.AI) 2026-06-15

The Accountability Paradox: How Platform API Restrictions Undermine AI Transparency Mandates

arXiv:2505.11577v5 Announce Type: replace-cross Abstract: Recent application programming interface (API) restrictions on major social media platforms challenge compliance with the EU Digital Services Act [20], which mandates data access for algorithmic transparency. We develop a structured audit framework to assess the growing misalignment between regulatory requirements and platform implementations. Our comparative analysis of X/Twitter, Reddit, TikTok, and Meta identifies critical ``audit blind-spots'' where platform content moderation and algorithmic amplification remain inaccessible to independent verification. Our findings reveal an ``accountability paradox'': as platforms increasingly rely on AI systems, they simultaneously restrict the capacity for independent oversight. We propose targeted policy interventions aligned with the AI Risk Management Framework of the National Institute of Standards and Technology [80], emphasizing federated access models and enhanced regulatory enforcement.

25.
arXiv (CS.AI) 2026-06-24

A Survey on Federated Causal Discovery and Inference

arXiv:2606.23741v1 Announce Type: cross Abstract: Causal reasoning, which encompasses the discovery of causal structures and the inference of causal effects, is fundamental to data-driven decision making. In practice, data for reliable causal analysis are often distributed across institutions and cannot be centralized due to privacy regulations or communication constraints. Federated learning (FL) addresses this by enabling collaborative analysis without raw data sharing, giving rise to the rapidly growing field of federated causal discovery (FCD) and inference (FCI). However, the interdisciplinary nature of this field and the absence of a comprehensive survey present barriers to entry for researchers. This paper bridges that gap by providing a systematic review through multi-dimensional taxonomies. Grounded in the three core design decisions underlying any FCD solution, namely how structures are learned, how data are partitioned, and what structural knowledge each party obtains, we organize FCD along three axes: methodological paradigm, federation topology, and structural scope. We further examine key practical dimensions, including temporal dynamics, data heterogeneity, missing data, and non-identical variable sets. For FCI, we categorize methods by target estimand (average versus individualized/conditional treatment effects) and by estimation strategy, from classical weighting methods to modern deep generative architectures. Unlike prior works that treat FCD and FCI separately, we formalize their connection as complementary stages of a unified federated causal reasoning pipeline, where FCD supplies the structural knowledge required for valid effect estimation in FCI. Finally, we highlight their shared concerns regarding privacy, communication efficiency, theoretical guarantees, and application domains, and conclude by identifying open challenges for future research.