Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.CV) 2026-06-16

Deep Learning in Seismic Interpretation: Federated Advances in Salt Dome Segmentation

Salt-dome delineation is a critical, high-impact task in subsurface geological interpretation, driving decisions in hydrocarbon exploration, reservoir modeling, and drilling safety. While convolutional encoder-decoder architectures have delivered significant improvements in automated salt segmentation, their widespread application is severely limited by data sovereignty concerns, dataset bias, and the scarcity of labeled seismic volumes. This paper introduces FedSaltNet, a Federated Learning (FL) framework explicitly engineered for robust, generalizable, and privacy preserving salt-dome segmentation. We couple a lightweight Small U-Net backbone, chosen for its efficiency and regularization properties with a novel Foreground-Weighted (FG-WEIGHTED) aggregation strategy designed to tackle domain-specific class imbalance. Through an extensive comparative study emulating non-IID conditions across four diverse seismic datasets (TGS, SEAM, F3, GBS), we demonstrate two critical findings: The FG-WEIGHTED algorithm effectively mitigates data heterogeneity, yielding a 4.0% relative improvement in Intersection over Union (IoU) over the best conventional FL method. The simple U-Net architecture proved essential, outperforming the higher capacity ResNet-18 U-Net variant by 166% in average IoU, underscoring the necessity of architectural simplicity in data-constrained federated environments. FedSaltNet provides a validated, high-performance solution that establishes the viability of federated deep learning for collaborative, next-generation subsurface interpretation.

02.
arXiv (CS.AI) 2026-06-16

LLM-WikiRace Benchmark: How Far Can LLMs Plan over Real-World Knowledge Graphs?

arXiv:2602.16902v5 Announce Type: replace Abstract: We introduce LLM-Wikirace, a benchmark for evaluating planning, reasoning, and world knowledge in large language models (LLMs). In LLM-Wikirace, models must efficiently navigate Wikipedia hyperlinks step by step to reach a target page from a given source, requiring look-ahead planning and the ability to reason about how concepts are connected in the real world. We evaluate a broad set of open- and closed-source models, including Gemini-3, GPT-5, and Claude Opus 4.5, which achieve the strongest results on the easy level of the task and demonstrate superhuman performance. Despite this, performance drops sharply on hard difficulty: the best-performing model, Gemini-3, succeeds in only 23\% of hard games, highlighting substantial remaining challenges for frontier models. Our analysis shows that world knowledge is a necessary ingredient for success, but only up to a point, beyond this threshold, planning and long-horizon reasoning capabilities become the dominant factors. Trajectory-level analysis further reveals that even the strongest models struggle to replan after failure, frequently entering loops rather than recovering. LLM-Wikirace is a simple benchmark that reveals clear limitations in current reasoning systems, offering an open arena where planning-capable LLMs still have much to prove. Our code and leaderboard available at https:/llmwikirace.github.io.

03.
arXiv (CS.CV) 2026-06-18

A Survey on Deep Learning Architectures for Point Cloud Classification and Segmentation

Point cloud stands as the most widely adopted format for representing 3D shapes and scenes due to its simplicity and geometric fidelity. However, its inherent unordered and irregular nature, exacerbated by sensor noise and occlusions, introduces unique challenges for machine learning based methodologies. To combat these issues, diverse strategies have been developed, including converting to a format that has orderliness, extracting local geometry, and permutation-invariant or self-attention-based processing. In this paper, our focus is directed towards deep learning models for three fundamental tasks in 3D vision: point cloud classification, part segmentation, and semantic segmentation. We begin by formally defining point cloud data, followed by an in-depth discussion on its structural characteristics. Then, we categorize notable works based on their backbone structure and evaluate their performance on popular benchmarks. Beyond empirical comparison, we offer insights into architectural innovations and limitations. We also outline open challenges and promising future directions for 3D point cloud understanding.

04.
arXiv (CS.CL) 2026-06-17

Smarter edits? Post-editing with error highlights and translation suggestions

As MT quality increases, interest in enhanced post-editing features such as QE-derived error highlights is growing, yet evidence for their usefulness remains limited. In this work, we explore the usefulness of LLM-derived error highlights and correction suggestions based on automatic post-editing (APE). We conduct a study where professional translators (En-Nl) post-edit translations using APE error highlights and correction suggestions and compare productivity, quality and user experience to regular PE and PE with QE-derived highlights. While no condition yielded productivity or quality gains compared to regular PE, APE highlights were better received than QE-derived highlights, and correction suggestions improved overall user experience.

05.
arXiv (CS.CV) 2026-06-11

From 2D Grids to 1D Tokens: Reforming Shared Representations for Multimodal Image Fusion

Multimodal image fusion aims to integrate complementary information from different modalities into a fused image that preserves rich local details while maintaining globally consistent appearance. Existing approaches build shared representations on 2D feature grids, which excel at modeling local structures but offer limited leverage over image-level global appearance factors. To balance these objectives, we introduce a compact 1D token interface based on a frozen pretrained image tokenizer for modeling non-local appearance/base factors. Rather than using the tokenizer as a reconstruction backbone, our design uses the 1D token space as a global carrier while retaining the 2D spatial pathway for local structure restoration. Specifically, we introduce Selective Token Editing (STE), which sparsely updates/replaces a small set of critical tokens, providing a lightweight mechanism to steer global appearance coherence while keeping the fusion backbone unchanged and avoiding extra losses. Experiments on four commonly used benchmarks show that our method achieves the best overall performance, with consistent, multi-metric improvements in both global coherence and local fidelity. Project page: https://zju-xyc.github.io/1D-Fusion-Project-Page/

06.
arXiv (quant-ph) 2026-06-16

Optical Creation of Synthetic Microgravity for Quantum Degenerate Gases

arXiv:2606.14985v1 Announce Type: cross Abstract: Microgravity environments provide unique opportunities for ultracold-atom experiments by enabling long interrogation times and reduced acceleration-induced dynamics. However, their realization has largely been restricted to specialized facilities such as drop towers, sounding rockets, and space-based laboratories. Here we realize synthetic microgravity for quantum degenerate gases using optically engineered force landscapes that compensate Earth's gravity to the milli-g level while maintaining continuous confinement of the atomic ensemble. These force landscapes are generated by dynamically painted optical dipole potentials and calibrated in situ through Bloch oscillations in a vertical optical lattice, enabling precise control of the residual acceleration. We use this capability to demonstrate matter-wave beam splitting with arm separations of several hundred microns. We further implement a Bloch-band atom interferometer in which interaction-induced dephasing is strongly suppressed through controlled three-dimensional expansion in the synthetic microgravity potential. This reduction of mean-field effects restores near-$\sqrt{N}$ scaling of interferometric sensitivity for large quantum degenerate ensembles. Our results establish a versatile platform for realizing synthetic microgravity with trapped quantum gases in terrestrial laboratories, bringing the advantages of microgravity experiments to continuously operating systems and opening new opportunities for quantum sensing, matter-wave interferometry, and precision measurements.

07.
arXiv (CS.LG) 2026-06-15

XRDiff: Crystal Structure Prediction from Powder X-Ray Diffraction Data Using Diffusion Models

arXiv:2606.14003v1 Announce Type: cross Abstract: Determining the crystal structure of a material from its powder X-ray diffraction (PXRD) pattern is a central challenge in materials science. PXRD is an accessible and widely used characterization technique, yet recovering the atomic structure from diffraction data requires solving an underdetermined inverse problem due to the loss of phase information. Generative modeling can provide a prior over atomic structure and learn the mapping from PXRD patterns to crystal structures via simulated structure-spectrum pairs. We present XRDiff, a diffusion model that recovers crystal structures from PXRD given either the stoichiometry or, in a more challenging setting, the elemental constituents and total number of atoms in the unit cell. We evaluate on datasets where each stoichiometry has multiple polymorphs and all polymorphs of a given composition are held out together, ensuring that high performance reflects genuine use of the diffraction signal. XRDiff achieves strong structure recovery rates on simulated benchmarks, indicating that the model learns a spectrum-to-structure mapping precise enough to differentiate between polymorphs. To address generalization to experimental data, we compare a full-spectrum encoding against an encoding based on peak descriptors. The peak-based encoding generalizes substantially better, outperforming even a model trained on full spectra with augmentations fitted to the experimental noise distribution. These results demonstrate that representations robust to the noise and artifacts present in real-world PXRD offer a practical and scalable path toward closing the simulation-to-experiment gap, enabling zero-shot crystal structure solution from experimental PXRD with full or partial chemical composition input.

08.
arXiv (CS.AI) 2026-06-16

Policy Regret for Embedding Model Routing: Contextual Bandits with Low-Rank Experts

arXiv:2606.14929v1 Announce Type: cross Abstract: Modern recommendation systems increasingly rely on dynamically routing diverse queries to multiple embedding models. Despite its practical significance, this problem remains poorly understood under realistic conditions like adversarial queries, bandit feedback, and limited observability of models. We formalize embedding model routing as an adversarial contextual linear bandit with low-rank experts, where contexts are queries, actions are items, and experts are the embedding models working on low-rank latent representation spaces. We first establish that standard regret notions suffer from structural misspecification or statistical intractability, and we identify a log-quadratic policy class that is expressive enough to capture query-dependent model routing, yet structured enough to allow efficient online learning. Second, we propose a policy gradient algorithm called Hypentropy Policy Gradient (HPG). It provably adapts to the unknown low-rank structure under incomplete information and attains $\tilde{\mathcal O}(s\sqrt{M T})$ linearized policy regret – where $s, M$, and $T$ are the intrinsic rank of the experts, the number of models, and the number of rounds – thus avoiding a curse of dimensionality. Finally, we also provide an computationally efficient and parameter-free implementation of HPG.

09.
bioRxiv (Bioinfo) 2026-06-13

Testing the reliability of AI-generated protein structures

Authors:

Although AlphaFold2 and its competitors have demonstrated remarkable abilities to predict protein structure, more work is needed to explore the limitations of these methods. Here we investigated the reliability of AlphaFold2 and ColabFold by creating a set of realistic but false protein sequences, using ColabFold to predict their structure, and then asking how often the program produces a high-scoring structure for a sequence that does not represent a protein. We determined that AlphaFold2 has a very small but non-zero false positive rate, estimated here at approximately 1 in 435 if one uses a threshold pLDDT score of 70 to define positive predictions. We also discovered, serendipitously, that some high-scoring sequences in the human genome were not false positives, but instead were previously unknown and un-annotated pseudogenes. These latter findings indicate that some well-established human annotations of protein-coding genes may have incorrectly extended the 5-prime untranslated regions too far. They also suggest that the false positive rate of AlphaFold2 is low enough that almost any high-scoring structure, even in a noncoding region, is worthy of further investigation.

10.
Nature (Science) 2026-06-10

Lignin to adipic acid in a high-yield chemical and biological redox process

Viable manufacturing pathways to produce bio-based chemicals from renewable feedstocks, such as lignin derived from plant biomass, are needed to decarbonize the chemicals manufacturing sector. Converting the recalcitrant lignin polymer to valuable bioproducts remains a longstanding challenge in biorefining, with the highest reported single-product yield from lignin currently around 20 wt% (refs. 1–4). Most existing lignin depolymerization strategies target aryl–ether bond cleavage, which can produce aromatic monomers in yields of only about 30 wt%, and still as complex mixtures with C–C-linked dimers and oligomers5,6. The recalcitrance of these C–C linkages between aromatic moieties fundamentally limits single-product yields from lignin, prompting the development of strategies to efficiently cleave these C–C bonds3,7–9. Here we show how reductive processing of lignin from poplar accesses a hydrocarbon mixture of alkyl-aromatic monomers and oligomers that is privileged for oxidative conversion to monomeric aromatic carboxylic acids, comprising mostly benzoic acid and phthalic acid isomers in up to 73 wt% monomer yields, using a Co/Mn/Br catalyst. The soil bacterium Pseudomonas putida KT2440 was engineered to convert this mixture of aromatic carboxylic acids to muconolactone, a precursor to bio-based nylons, enabling final adipic acid yields up to 26 wt% (gram adipic acid per gram lignin) with a maximum theoretical yield of 57 wt%. This pairing of reductive and oxidative steps with lignin resembles processes in petrochemical refining and shows how lignin may be converted into a single, valuable bioproduct in high yields. A chemical and biological redox process that resembles processes in petrochemical refining is used to convert lignin from poplar into a single, valuable bioproduct, adipic acid, in high yields.

11.
arXiv (CS.LG) 2026-06-11

Few-Shot Resampling for Scalable Statistically-Sound Data Mining

arXiv:2606.11235v1 Announce Type: new Abstract: A key step in knowledge discovery is the evaluation of data mining results. In several applications, including pattern mining, graph analysis, and others, this step includes the evaluation of the statistical significance of the results, to avoid spurious discoveries due only to noise or random fluctuations in the data. While specialized procedures have been developed for some specific applications, resampling-based approaches are widely used, in particular for complex analyses where analytical results cannot be derived. However, current resampling-based approaches require the generation and analysis of thousands of resampled datasets, and are therefore impractical for large datasets or computationally intensive analyses. In this paper, we introduce FewRS, a simple and effective resampling-based approach to assess the statistical significance of data mining results with rigorous guarantees on the probability of false discoveries. Our approach can be used in every situation where resampling-based approaches are applied. FewRS builds on our derivation of a novel bound to the supremum deviation of test statistics representing the quality of data mining results. We prove that FewRS needs to generate and analyze an extremely small number of resampled datasets, leading to a highly scalable approach with wide applicability. We test our approach on common tasks such as pattern mining and network analysis. In all cases, our approach results in a reduction of up to two orders of magnitude in running time compared to the state of the art, while preserving high statistical power, enabling the statistical validation of data mining results on large-scale real-world datasets.

12.
arXiv (CS.AI) 2026-06-16

StyleShield: Exposing the Fragility of AIGC Detectors through Continuous Controllable Style Transfer

arXiv:2605.00924v2 Announce Type: replace-cross Abstract: AI-generated content (AIGC) detectors are increasingly deployed in high-stakes settings such as academic integrity screening, yet their reliability rests on a fundamental paradox: as language models are trained on human-written corpora, the statistical boundary between AI and human writing will inevitably dissolve as models improve. Commercial incentives have further distorted this landscape – detection services and "de-AIification" tools often operate within the same supply chain, replacing evaluation of content quality with judgment of content origin. We present StyleShield, the first flow matching framework for conditional text style transfer, operating directly in continuous token embedding space via a DiT backbone with zero-initialized cross-attention adapters conditioned on frozen Qwen-7B representations. At inference, we adapt the SDEdit paradigm from image synthesis to text embeddings, with a single parameter gamma providing smooth continuous control over the evasion-preservation trade-off. On a multi-domain Chinese benchmark, StyleShield achieves 94.6% evasion against the training detector and >=99% against three unseen detectors, maintaining 0.928 semantic similarity. We further introduce RateAudit, a document-level scheduling algorithm that demonstrates detection-rate verdicts can be set to arbitrary values, directly questioning the reliability of score-based evaluation.

13.
arXiv (CS.LG) 2026-06-12

WHAR Arena: Benchmarking the State of the Art in Efficient Wearable Human Activity Recognition

arXiv:2606.13194v1 Announce Type: new Abstract: Deep learning has become the dominant paradigm in Wearable Human Activity Recognition (WHAR), yet progress is obscured by a comparability crisis. Results are often reported using inconsistent datasets, custom data processing, and varying evaluation protocols, making state-of-the-art claims fragile. We address this with a large-scale, open-source benchmark that integrates 30 diverse datasets under standardized processing, unified model interfaces, and a shared cross-subject evaluation protocol. Evaluating 17 representative architectures across 4760 training runs, we jointly measure predictive performance alongside on-device latency, peak memory, and model size on an Android reference device. Our results reveal that the WHAR state of the art is distributed rather than dominated by a single architecture. While CNN-HAR achieves the highest mean macro-F1, top-performing models cluster tightly, indicating contemporary architectures have converged near a predictive performance ceiling. When accounting for deployment efficiency, compact neural models, such as TinierHAR, and classical Random Forests define the practically relevant Pareto frontier, whereas larger recurrent and hybrid models incur high hardware costs without corresponding performance gains. Consequently, while predictive performance has plateaued, substantial potential for future progress remains in optimizing deployment efficiency and improving adaptation to domain shifts. We release our full framework to support transparent reuse and extension.

14.
arXiv (CS.CV) 2026-06-16

Parameter-Efficient Adaptation of SAM 3 for Automated ITV Generation from 4DCT Images

Authors:

Four-dimensional computed tomography (4DCT) captures the full respiratory cycle of thoracic anatomy, yet current Internal Target Volume contouring workflows process each phase in isolation, discarding temporal coherence and leaving contours vulnerable to phase-specific artifacts. We present a lightweight framework that applies parameter-efficient fine-tuning to the Segment Anything Model 3 (SAM 3) via low-rank adaptation (LoRA) to align its text-prompted segmentation with the medical domain using only seven annotated 3D CT volumes. Furthermore, the framework incorporates a hard negative mining strategy to improve boundary discrimination in low-contrast thoracic regions. At inference, phase-wise predictions are refined through phase-coherent temporal filtering and spatial connectivity analysis. Since respiratory motion is continuous and periodic, genuine anatomy appears in contiguous blocks of phases, whereas transient artifacts appear sporadically and are thus effectively suppressed. Experiments on pulmonary and cardiac structures yield median Dice scores of 0.968 and 0.910 with 95th-percentile Hausdorff distances of 0.998 mm and 2.931 mm, respectively. The proposed framework effectively eliminates the severe false-positive predictions inherent in the zero-shot inference of the unadapted SAM 3. With only seven annotated volumes, the framework retains over 95% of full-data accuracy, and the entire pipeline is trainable on a single consumer-grade GPU, demonstrating a scalable, data-efficient solution for adaptive radiotherapy.

15.
arXiv (CS.LG) 2026-06-17

Statistical Learning from Attribution Sets

arXiv:2602.06276v2 Announce Type: replace Abstract: We address the problem of training conversion prediction models in advertising domains under privacy constraints, where direct links between ad clicks and conversions are unavailable. Motivated by privacy-preserving browser APIs and the deprecation of third-party cookies, we study a setting where the learner observes a sequence of clicks and a sequence of conversions, but can only link a conversion to a set of candidate clicks (an attribution set) rather than a unique source. We formalize this as learning from attribution sets generated by an oblivious adversary equipped with a prior distribution over the candidates. Despite the lack of explicit labels, we construct an unbiased estimator of the population loss from these coarse signals via a novel approach. Leveraging this estimator, we show that Empirical Risk Minimization achieves generalization guarantees that scale with the informativeness of the prior and is also robust against estimation errors in the prior, despite complex dependencies among attribution sets. Simple empirical evaluations on standard datasets suggest our unbiased approach significantly outperforms common industry heuristics, particularly in regimes where attribution sets are large or overlapping.

16.
arXiv (CS.CV) 2026-06-24

Solving Semi-Supervised Few-Shot Learning from an Auto-Annotation Perspective

Semi-supervised few-shot learning (SSFSL) resembles real-world applications such as auto-annotation, as it aims to learn a model from a few labeled and abundant unlabeled task-specific examples to annotate the unlabeled ones. Despite the availability of powerful open-source Vision-Language Models (VLMs) and open-world data, existing SSFSL literature largely neglects these resources. In contrast, the related area few-shot learning (FSL) has already exploited them to boost performance. Arguably, to solve real-world auto-annotation, SSFSL should leverage such open resources. To bridge this gap, we explore established SSL methods to finetune a VLM. Unexpectedly, they significantly underperform FSL baselines that do not use unlabeled data. Our in-depth analysis reveals the root cause of failure: VLMs produce flat distributions of softmax probabilities, resulting in zero utilization of unlabeled data and weak supervision signals. To address this challenge, we propose an embarrassingly simple solution that uses temperatures to sharpen the softmax output, which not only increases the confidence scores of pseudo-labels to improve the utilization of unlabeled data, but also strengthens training supervision for effective finetuning. Furthermore, we exploit task-relevant open data, e.g., those retrieved from VLMs' publicly available pretraining set. To mitigate the imbalance and domain gaps in retrieved data, we employ a stage-wise training strategy. Building on the successful finetuning of VLMs and the exploitation of open data, we present a simple yet effective SSFSL method, Stage-Wise Finetuning with Temperatures (SWIFT). Across five benchmarks, SWIFT outperforms recent FSL and SSL methods by $\sim$5 accuracy points. SWIFT even rivals supervised learning, which finetunes a VLM assuming unlabeled data having ground-truth labels!

17.
medRxiv (Medicine) 2026-06-23

Timing of S. aureus-related mortality in a large randomized clinical trial: Implications for future study design

Background: Longer follow-up periods in clinical trials for S. aureus bacteremia (SAB) may capture unrelated deaths, adding random noise that risks biasing trial results towards the null. Objective: To evaluate the timing and infection-relatedness of deaths within a large SAB clinical trial platform. Design: Blinded duplicate adjudication of trial deaths using a modified 7-point Likert-Scale. A third reviewer settled disagreements. Setting: 37 Canadian hospitals participating in the S. aureus Network Adaptive Platform (SNAP) Trial. Participants: 1515 adult patients recruited to SNAP between February 2022 and May 2026. Measurements: Timing and relatedness of 90-day deaths categorized as at least possibly SAB-related not likely to be SAB-related. Optimal follow-up cut-off was determined using Youden's index and graphically. Results: 247 deaths occurred; 97 (39.3%) were adjudicated as at least possibly SAB-related and 150 (60.7%) as not likely related. For probably/definitely related deaths, interrater agreement was 85.0% (Gwet's AC 0.73, substantial); for at least possibly related, it was 77.3% (Gwet's AC 0.55, moderate). Median survival was significantly shorter for SAB-related deaths (12 vs. 30.5 days; difference: 19 days earlier, 95% CI: 12-26, p

18.
Nature Medicine 2026-06-17

General-purpose chatbots outperform clinical AI tools on physicians’ real-world questions

Authors: Unknown Author

Specialized clinical AI tools are entering medical practice with little independent testing. In a head-to-head evaluation across two public benchmarks and real questions from physicians, three general-purpose frontier large language models outperformed two leading clinical AI tools, which performed no better than Google search AI overview.

19.
bioRxiv (Bioinfo) 2026-06-24

An atlas-scale generative model for unified representation learning of bulk RNA-seq data

Public bulk RNA-seq repositories contain hundreds of thousands of samples, creating opportunities for large-scale representation learning, but integration across studies remains challenging because of heterogeneous annotations, experimental protocols, and technical variation. While pre-trained foundation models are now widely available for single-cell RNA-seq, comparable resources for bulk RNA-seq remain scarce, motivating a model that learns a unified, tissue-aware representation directly from bulk data. We trained a supervised variational autoencoder (VAE) on a compendium of 118,263 bulk RNA-seq samples that we assembled from TCGA, GTEx, and ARCHS4 and mapped to 42 tissue categories. The model classifies tissue of origin at 94.9% balanced accuracy (weighted F1 96.2%) and compresses 16,115 genes into a 121-dimensional latent space. Tissue identity is the primary organizing axis of the latent space, while source effects remain secondary. To assess the impact of data volume, we constructed training sets at three different scales (38K, 75K, and 118K samples). Our results demonstrated that reconstruction fidelity improved incrementally with each expansion of the dataset, but with diminishing returns. We validated the model on an independent cohort of 734 paediatric tumour samples from TARGET, achieving 84.6% agreement with the expected tissue of origin. The trained model and code are available at GitHub (https://github.com/BIMSBbioinfo/flexynesis_tissue_vae_manuscript) with an interactive web application.

20.
arXiv (CS.CV) 2026-06-24

DDStereo: Efficient Dual Decoder Transformers for Stereo 3D Road Anomaly Detection

Stereo-based 3D object detection still faces two critical safety challenges: real-time performance and open-set generalization. Existing stereo 3D methods typically achieve twice the accuracy of monocular methods but suffer from significantly lower inference speeds, making them unsuitable for real-time applications. Meanwhile, recent advances in open-world detection have introduced open-set and open-vocabulary algorithms in monocular 2D and 3D settings, yet stereo-based open-set detection remains largely unexplored. To bridge this gap, we propose DDStereo, a novel Dual-Decoder Stereo Transformer for real-time open-set 3D object detection. DDStereo features two lightweight decoder branches: one for open-set foreground 2D detection and the other for 3D attribute regression. These decoders share object-level queries to achieve unified target-level alignment. To enhance inference efficiency, we designed a compact disparity feature extractor and a streamlined decoder architecture. Experiments on public stereo 3D benchmarks demonstrate that DDStereo achieves state-of-the-art accuracy under both closed-set and open-set protocols. Notably, our method surpasses existing stereo 3D detectors in inference speed and, for the first time, achieves real-time performance comparable to monocular approaches.

21.
arXiv (CS.LG) 2026-06-24

Model selection with proper scoring rules on data sets of time series

arXiv:2606.24715v1 Announce Type: cross Abstract: We consider the problem of model selection between probabilistic models on data sets of time series. Chosen a proper scoring rule, we denote by the term score the average value of the scoring rule on the test of an individual time series. For model selection, we need aggregating the values of the scores across multiple time series. Three summary statistics are commonly used for model selection: mean score, median score, and mean rank. Results in previous papers show that these statistics can yield conflicting decisions; we show how the conflicting conclusions are due to the skewness of the distribution of scores. We also show that as the test set of each time series of the data set increases, the different model selection criteria progressively converge to the same conclusion. However, for short tests sets, only the mean score identifies the true model as the best. We illustrate these phenomena with an analysis on intermittent time series, including the data set of the M5 competition, where we underline the importance of having a large test set. In such experiments, we further notice that model selection based on mean ranks remains unchanged using different scaling factors.

22.
arXiv (CS.AI) 2026-06-19

Scaling Generative Foundation Models for Chest Radiography with Rectified Flow Transformers

arXiv:2606.19460v1 Announce Type: cross Abstract: We introduce the first generative foundation model for chest radiograph synthesis trained from scratch at the billion-parameter scale. Existing radiographic AI models often suffer from poor generalisation across patient subpopulations, institutions, and acquisition settings, resulting in limited real-world clinical utility. Controlled, high-fidelity synthesis of chest radiographs is a promising path toward diversifying clinical datasets and evaluating the robustness of diagnostic models. Therefore, we present the largest specialist generative foundation model for chest radiographs to date, with over 1.3B parameters, trained for 1.6T tokens on a curated, heterogeneous dataset comprising 1.2M radiographs and clinical expert-guided metadata. Our model supports controllable radiograph generation and editing across multiple demographic subgroups, acquisition views, and a dozen pathologies. Moreover, we significantly advance the state of the art in radiograph synthesis fidelity, producing images that are indistinguishable from real radiographs to clinical experts.

23.
arXiv (CS.LG) 2026-06-24

Prediction of Viscoelastic Droplet Impact Dynamics Using a Vision Transformer-Based Approach

arXiv:2606.23940v1 Announce Type: cross Abstract: Droplet impact on solid surfaces is a complex fluid dynamics problem with applications in spray cooling, inkjet printing, and pharmaceutical processing. Although numerical simulations are widely used to investigate these dynamics, their computational cost becomes significant when multiple parametric variations are considered. In this work, we investigate the use of a Video Vision Transformer (ViViT) architecture to predict the temporal evolution of viscoelastic droplets impacting solid surfaces using volume fraction fields obtained from the Volume of Fluid (VOF) method. In Newtonian fluids, impact dynamics are mainly characterized by the Reynolds number $Re$, representing the ratio of inertial to viscous forces, and the Weber number $We$, representing the ratio of inertial to surface tension forces. For viscoelastic fluids, additional parameters are required to account for elastic effects, namely the solvent viscosity ratio $\beta$ and the Weissenberg number $Wi$, increasing simulation complexity and cost. Instead of simulating the entire droplet dynamics, the proposed approach uses only the initial 10% to 20% of the simulation to predict the remaining evolution. Depending on the prediction configuration, this strategy reduces computational cost by approximately 80% to 90% compared to full numerical simulations. The ViViT produces physically consistent predictions across different parameters and prediction horizons, successfully capturing both spreading and bouncing regimes while preserving geometric features and structural similarity. Since volume fraction fields can also be extracted from experimental videos, the proposed framework could be extended to incorporate experimental data during training, potentially improving the physical fidelity of the predicted dynamics.

24.
arXiv (CS.CL) 2026-06-15

Automatic identification of diagnosis from hospital discharge letters via weakly supervised Natural Language Processing

Identifying patient diagnoses from hospital discharge letters is essential for large-scale cohort selection and epidemiological research, but traditional supervised approaches require extensive manual annotation, which is often impractical for large textual datasets. We present a weakly supervised Natural Language Processing (NLP) pipeline for classifying Italian discharge letters without document-level manual annotation. The method extracts diagnosis-related sentences, generates semantic embeddings using a transformer model further pre-trained on Italian medical documents, and applies a two-level clustering procedure to derive weak labels that are then used to train a document-level classifier. The approach was evaluated in a case study on bronchiolitis using 33,176 discharge letters of children admitted to 44 emergency rooms or hospitals in the Veneto Region, Italy, between 2017 and 2020. The best weakly supervised model achieved an AUROC of 77.68% ($\pm4.30\%$), an AUPRC of 73.13% ($\pm4.93\%$), and an F1-score of 78.14% ($\pm4.89\%$) against manually annotated data. Performance surpassed unsupervised baselines and approached fully supervised models, while reducing the need for manual annotation by more than 1,500 hours for a dataset of this size. Similar model rankings were observed in a secondary validation on a smaller bronchitis dataset (3,188 discharge letters, 2020-2025), where the best weakly supervised model achieved an AUPRC of 76.72% ($\pm 5.02\%$). These results suggest the potential of weakly supervised NLP methods for scalable disease identification from clinical discharge letters.

25.
arXiv (CS.AI) 2026-06-16

When Generator Replay Degrades: Projected Rehearsal Orchestration for Heterogeneous Federated Class-Incremental Learning

arXiv:2606.15695v1 Announce Type: cross Abstract: Federated class-incremental learning (FCIL) becomes substantially harder when clients observe different label subsets, progress through tasks at different stages, and provide uneven supervision for the same semantic concepts. Existing FCIL methods often preserve old knowledge through input-space synthesis, but they can be fragile under heterogeneous task streams and difficult to transfer across modalities. To alleviate such issues, we propose PRO, a framework that replaces synthetic input replay with projected rehearsal orchestration. To remove external pretraining, we evaluate all methods under the same warmup. After this, PRO maintains compact class-level projected memories on the server and allows clients perform balanced pseudo multi-task training over current examples and old projected memories. To handle stronger representation drift, we further introduce PRO-MAX, which augments PRO with neighborhood-weighted memory alignment while preserving the same server-light principle that the server only aggregates model updates and memory statistics. Across image, text, and graph benchmarks, PRO and PRO-MAX improve retention and final utility under heterogeneous streams while remaining competitive in homogeneous FCIL. Even when baselines are given expanded replay budgets, they degrade under supervision imbalance and stage misalignment, indicating that replay quantity alone does not resolve replay-quality failures. Additional weak-task diagnostics further show that larger replay mismatch is associated with larger downstream degradation, while our method keeps projected memories better aligned with the evolving representation.