Paper Plaza - AcademicHub

01.

arXiv (CS.CL) 2026-06-16 DOI: arXiv:2606.15059

A Practical Evaluation Method for Long-Form Simultaneous Speech-to-Speech Translation

Authors:

Simultaneous speech-to-speech translation (SimulS2ST) enables real-time cross-lingual communication, but existing evaluation has focused largely on short or pre-segmented speech rather than long-form, continuous input. Prior approaches are difficult to reproduce and make assumptions that do not hold for end-to-end systems. We present a practical evaluation method for long-form SimulS2ST. Given source speech, pre-segmented source transcripts, and reference translations, we run automatic speech recognition (ASR) and forced alignment on the generated target speech to recover token-level timestamps, then apply a sentence-embedding-based aligner to match the target text to its corresponding source sentences. This enables sentence-level computation of latency and quality metrics, including YAAL and xCOMET, which are then aggregated into final system-level scores. Experiments on representative SimulS2ST systems show that the method is effective in practice and reveal that current systems suffer from substantial latency accumulation on long speech.

Read & Discuss → View Source →

02.

Science (Express) 2026-06-11 DOI: 10.1126/science.aeh0665

Laser phase plate improves structure determination of small proteins by cryo-EM | Science

Authors: Unknown Author

Phase plates can in principle overcome the poor image contrast in electron cryo–microscopy (cryo-EM) and the resulting limits on the structural reconstruction of small proteins. However, previous designs have been unstable and compromised the high-resolution signal. They have thus been unable to surpass results achieved by standard cryo-EM. Here, we show that the laser phase plate (LPP), installed in a custom, modern Titan Krios microscope, enhances the resolution in single-particle reconstruction of small proteins by improving specimen-motion correction, recovery of information from the early frames, as well as particle visualization, 3D classification, and alignment. These advances use standard defocus ranges and reconstruction procedures, but open the door to LPP-tailored protocols offering further improvements by leveraging the LPP demonstrated here.

Read & Discuss → View Source →

03.

arXiv (CS.LG) 2026-06-19 DOI: arXiv:2606.20108

EFIQA: Explainable Fundus Image Quality Assessment via Anatomical Priors

Authors:

Pengwei Wang ↗Jos\'e Morano ↗Qian Wan ↗Hrvoje Bogunovi\'c ↗

arXiv:2606.20108v1 Announce Type: cross Abstract: Image quality control is vital for a wide range of downstream applications. Deep learning-based image quality assessment methods typically train classifiers on dataset-specific quality labels, inheriting two limitations: (1) generalization is tied to the labeling criteria of the training set and (2) these methods cannot provide spatial feedback on where the quality is degraded, lacking explainability. In this work, we propose EFIQA, a framework that requires no quality-related supervision and produces spatial quality maps by design. Rather than learning ``what is degradation" from human-annotated labels, EFIQA learns ``what should be there" by leveraging anatomical priors. For fundus photography, we instantiate this as a two-stage approach, by first training an unsupervised anomaly detector via masked anatomical inpainting to identify regions of missing vasculature, and then distilling this prior knowledge into a shallow adapter mapping features of a frozen foundation model to precise quality maps. External-dataset evaluation demonstrates that this label-free approach with minimal adaptation achieves better performance and explainability compared with supervised methods across benchmarks with different quality criteria, highlighting its potential for real-world applications.

Read & Discuss → View Source →

04.

PLOS Medicine 2026-05-13 DOI: HASH:c338fc95d033da78a46f48516597d8df

On the evolution of the company we keep: Implications for infectious disease modeling

Authors:

Joël Mossong ↗

by Joël Mossong Whom we meet shapes how infections spread. Where earlier focus of mathematical epidemiology was on incorporating age, more recent work has begun to reveal the importance of socioeconomic aspects for understanding and managing future epidemics. In this Perspective, Joël Mossong discusses the importance of understanding social contacts and how they have evolved for infectious disease modeling, and the need to factor in additional considerations such as ethic and socioeconomic backgrounds.

Read & Discuss → View Source →

05.

arXiv (CS.LG) 2026-06-17 DOI: arXiv:2606.18236

Sign-Rank, Index, and List Replicability: Connections and Separations

Authors:

Ari Blondal ↗Hamed Hatami ↗Pooya Hatami ↗Chavdar Lalov ↗Sivan Tretiak ↗

arXiv:2606.18236v1 Announce Type: new Abstract: In learning theory, the sign rank of a binary concept class captures the smallest dimension in which it can be represented by points and halfspaces. Despite tremendous interest, lower bounds on sign rank are notoriously difficult to come by. Two recent approaches to the problem establish lower bounds on sign rank by measures that are easier to analyze: the $\mathbb{Z}_2$-index and the list replicability number. We order these measures, showing that the $\mathbb{Z}_2$-index is upper-bounded by a linear function of the list replicability number. As a main consequence, we obtain a strong separation between sign rank and $\mathbb{Z}_2$-index, thereby resolving a question of Frick, Hosseini, and Vasileuski. This motivates a thorough study of list replicability, the stronger of the two lower-bounding measures. We establish upper bounds on the list replicability number by two combinatorial measures: height and minimum star number. We also prove a fundamental composition result, showing that the product of two concept classes has list replicability number bounded by the sum of the list replicability numbers of the two classes.

Read & Discuss → View Source →

06.

arXiv (CS.LG) 2026-06-12 DOI: arXiv:2606.12640

Individual Control Barrier Functions-Guided Diffusion Model for Safe Offline Multi-Agent Reinforcement Learning

Authors:

Qingyun Guo ↗Junyi Shi ↗Jianuo Huang ↗Tianyu Shi ↗

arXiv:2606.12640v1 Announce Type: new Abstract: Offline reinforcement learning allows control policies to be learned directly from data without online interaction, making it suitable for safety-critical tasks. Recent studies have applied diffusion models to offline reinforcement learning to leverage their strong capacity for modeling complex data distributions. However, existing approaches primarily focus on single-agent settings, leaving the safety challenges in multi-agent environments largely unexplored. In this work, we propose a safe offline multi-agent reinforcement learning algorithm that embeds neural individual control barrier functions into the diffusion model to enhance safety during trajectory generation, with control policies recovered through inverse dynamics. We evaluate our algorithm across diverse benchmarks, demonstrating substantial safety improvements while maintaining competitive rewards.

Read & Discuss → View Source →

07.

arXiv (CS.AI) 2026-06-18 DOI: arXiv:2606.19026

A Hybrid LSTM–Vision Transformer Architecture for Predicting HRRR Forecast Errors

Authors:

David Aaron Evans ↗Jay C. Rothenberger ↗Kara J. Sulia ↗Nick P. Bassill ↗Chris D. Thorncroft ↗

arXiv:2606.19026v1 Announce Type: cross Abstract: Forecast errors in high-resolution numerical weather prediction (NWP) systems are often linked to unresolved planetary boundary layer (PBL) processes, convection, terrain-induced circulations, and other vertically structured atmospheric phenomena. Previous work demonstrated that Long Short-Term Memory (LSTM) networks can successfully predict forecast errors in the High-Resolution Rapid Refresh (HRRR) model using mesonet observations, but we believe performance degradation is linked to periods of complex vertical atmospheric evolution. To address this limitation, we develop a hybrid LSTM-Vision Transformer (LSTM-ViT) framework that combines temporal sequence learning from surface observations with atmospheric profiles from the New York State Mesonet profiler network. The LSTM-ViT framework is trained to predict HRRR hourly precipitation, 10 m wind speed, and 2 m temperature forecast errors at individual mesonet stations. Across all three predictors, incorporation of profiler-derived atmospheric structure improves forecast error prediction skill relative to the baseline LSTM architecture, with the largest gains occurring at shorter forecast lead times and during periods of enhanced PBL activity. Improvements are particularly pronounced for precipitation forecast error, where the LSTM-ViT framework achieves approximately a twofold increase in predictive skill relative to the baseline LSTM while better capturing convectively driven error evolution and reducing degradation associated with PBL processes. These results demonstrate that combining temporal sequence learning with vertically informed attention mechanisms provides a physically meaningful pathway for improving forecast error prediction in operational NWP systems. Our research offers forecasters enhanced guidance regarding model bias and forecast confidence.

Read & Discuss → View Source →

08.

arXiv (quant-ph) 2026-06-16 DOI: arXiv:2506.06010

Magnetic control of an exciton-polariton condensate in a van der Waals magnet

Authors:

arXiv:2506.06010v3 Announce Type: replace-cross Abstract: Quasiparticle condensates are among the most spectacular solid-state manifestations of quantum physics. Coupling macroscopic real-space wavefunctions to additional degrees of freedom, such as the electron spin, would add valuable control knobs for quantum applications. While creating spin-carrying superconducting condensates has attracted enormous attention, man-made condensates of light-matter hybrids known as exciton-polaritons have lacked an analogous spin-based perspective. Here we open a new door by demonstrating magnetically tunable exciton-polariton condensation in the van der Waals magnet CrSBr. Under photoexcitation, CrSBr microwires embedded in an optical cavity show the hallmarks of polariton condensation: a dramatic increase of the emission intensity from an excited laterally confined polariton state by multiple orders of magnitude, spectral narrowing of the emission line, and a continuous shift of the peak energy. Interferometry evidences an increase in spatial and temporal coherence. Owing to the strong coupling between the spin order and excitonic correlation, the energy of the condensate can be tuned by up to 10.5 meV by an external magnetic field of only 2 Tesla. Our results establish CrSBr microcavities as a powerful platform for exploring magnetic control of polariton condensates and mark a significant step toward spin-controlled coherent quantum light sources.

Read & Discuss → View Source →

09.

arXiv (CS.CV) 2026-06-24 DOI: arXiv:2405.01558

Configurable Holography: Towards Display and Scene Adaptation

Authors:

Yicheng Zhan ↗Liang Shi ↗Wojciech Matusik ↗Qi Sun ↗Kaan Ak\c{s}it ↗

Rendering holograms for holographic displays is often an iterative and computationally costly process. Emerging learned holography methods have alleviated this bottleneck by enabling fast hologram rendering with improved reconstruction quality. However, existing methods still depend on fixed display hardware and scene parameters, requiring retraining for each new configuration. This limits rapid adaptation to different visual needs, including scene brightness, user focus preference, and hardware compatibility. We introduce Configurable Holography, a learned CGH framework in which a single model adapts to diverse display-scene parameters through explicit conditioning, eliminating the need for retraining. As a prototype, we present a configurable structure and derive a family of models that continuously adapt to propagation distance, volume depth, peak brightness, pixel pitch, and wavelength. To further improve efficiency, we incorporate auxiliary monocular depth estimation for depth-aware 3D hologram synthesis from RGB-only inputs and apply knowledge distillation for interactive inference. Our extensive simulation and hardware experiments on three holographic display prototypes with different combinations of configurations show on-par reconstruction quality with existing methods, offering up to 2x speed-up in fp32. Our work represents an initial step toward flexible, general-purpose learned holography systems that can seamlessly adapt across diverse hardware and user-specific visual requirements.

Read & Discuss → View Source →

10.

arXiv (CS.AI) 2026-06-17 DOI: arXiv:2606.18223

Learning Red Agent Policy from Observations for Neurosymbolic Autonomous Cyber Agents

Authors:

Ankita Samaddar ↗Sandeep Neema ↗Daniel Balasubramanian ↗Xenofon Koutsoukos ↗

arXiv:2606.18223v1 Announce Type: cross Abstract: With sophisticated cyber-attacks becoming increasingly prevalent, modern networks require intelligent autonomous cyber-defense agents trained via Reinforcement Learning (RL). These agents employ neurosymbolic approaches such as behavior trees with learning-enabled components (LECs) to learn, reason, adapt, and implement security rules while maintaining critical operations. However, these autonomous networks are partially observable systems, i.e., the cyber-attacker's (red agent's) actions are not observable, making it difficult for the defender to predict red actions, learn red policies, or assess the attacker's intrusion levels. To address this, we propose a Policy Learning Technique using imitation learning to learn policies for partially observable RL agents with discrete states and discrete actions. We apply this technique in an autonomous cyber environment to predict red agent's actions from network observations and defender actions. Integrated with a neurosymbolic cyber-defense agent, our method effectively handles different red policies and achieves high prediction accuracy across diverse simulated scenarios.

Read & Discuss → View Source →

11.

arXiv (CS.CV) 2026-06-15 DOI: arXiv:2604.15173

Boundary-Centric Clip-Budgeted Active Learning for Temporal Action Segmentation

Authors:

Halil Ismail Helvaci ↗Sen-ching Samson Cheung ↗

Temporal action segmentation (TAS) in untrimmed videos requires dense temporal supervision. However, most of the annotation cost is spent identifying action transitions where segmentation errors concentrate and small temporal shifts can disproportionately degrade segment-level metrics. We introduce B-ACT, a clip-budgeted active learning framework that explicitly allocates supervision to these error-prone boundary regions. B-ACT operates in a hierarchical two-stage loop: (i) it ranks and queries unlabeled videos using predictive uncertainty, and (ii) within each selected video, it detects candidate transitions from the current model predictions and selects the top-$K$ boundaries via a novel boundary score. The boundary score fuses neighborhood uncertainty, class ambiguity, and temporal prediction dynamics to reveal the underlying importance of each frame. Importantly, our annotation protocol requests labels only at the boundary frames while still training on boundary-centered clips to exploit temporal context through the model's receptive field. Extensive experiments on GTEA, 50Salads, and Breakfast demonstrate that boundary-centric supervision delivers strong label efficiency and consistently surpasses representative TAS active learning baselines and prior state of the art under sparse budgets. Gains are largest on datasets where performance is highly sensitive to boundary placement, as measured by edit and overlap-based F1 metrics.

Read & Discuss → View Source →

12.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2606.15282

Enhancing Precision Agriculture with a Hybrid Deep Learning Framework for Multi-Class Plant Disease Classification and Interpretability

Authors:

Hasibul Islam Sufi ↗Ridam Roy ↗Shayla Alam Setu ↗Mahimul Islam Nadim ↗

This study proposes an overall deep learning architecture for multi-class classification of plant diseases from high-resolution leaf imagery, with a particular interest in investigating the behavior of ResNet-50 and a hybrid ResNet + Vision Transformer (ViT) design. A specially gathered image database with 15,200 training images and 3,800 validation images spanning 38 classes across multiple crops, including tomato, apple, grape etc. were subjected to preprocessing steps such as resizing, normalization, and data augmentation to enhance model robustness. Multiple architectures, including ResNet-50, MobileNetV2, and EfficientNet-B0, were trained and compared with the hybrid ResNet + ViT model. All models were fine-tuned using the AdamW optimizer and cross-entropy loss, with early stopping applied to prevent overfitting and ensure generalization. Furthermore, interpretability techniques such as Grad-CAM and saliency maps were implemented to indicate disease-relevant regions, while segmentation-based analysis was performed to identify the affected parts of a leaf. For every one of the considered architectures, ResNet-50 led to the highest accuracy of 98.74%, whereas the hybrid ResNet + ViT model achieved a competitive accuracy of 98.58%, showing that the hybrid architectures were effective in capturing both local and overall information. The experimental results showcase the promise of transformer-based models to achieve highly accurate, interpretable, and computationally efficient computer-based multi-class multi-disease classification systems, providing helpful assistance for cultivation management practices as well as for precision farming.

Read & Discuss → View Source →

13.

Nature (Science) 2026-06-17 DOI: HASH:3a5f24593dc41495ae09079a5f9892a5

A 98-qubit trapped-ion quantum computer with all-to-all connectivity

Authors:

Anthony Ransford ↗

Quantum computers require both high-fidelity operations and large qubit numbers to surpass classical capabilities1. Trapped-ion platforms have demonstrated the highest gate fidelities of any modality2–6 but scaling to larger qubit numbers while preserving performance has remained a central challenge. We report on Quantinuum Helios, a 98-qubit trapped-ion quantum processor based on the quantum charge-coupled device (QCCD) architecture7. Helios features 137Ba+ hyperfine qubits8,9, all-to-all connectivity enabled by a rotatable ion storage ring connecting two quantum operation regions by a junction10,11, speed improvements from parallelized operations12 and a new software stack with real-time compilation of dynamic programs13. Averaged over all operational zones in the system, we achieve average infidelities of 2.5(1) × 10−5 for single-qubit (1Q) gates, 7.9(2) × 10−4 for two-qubit (2Q) gates and 3.3(5) × 10−4 for state preparation and measurement (SPAM), none of which are fundamentally limited and probably able to be improved. These component infidelities are predictive of system-level performance in both random Clifford circuits and random circuit sampling (RCS), the latter demonstrating that Helios operates well beyond the reach of classical simulation and establishes a new frontier of fidelity and complexity for quantum computers14. A new quantum computer, Quantinuum Helios, which is a 98-qubit trapped-ion quantum processor built on the QCCD architecture, demonstrates performance well beyond classical capabilities and provides a path for scaling up quantum computing.

Read & Discuss → View Source →

14.

arXiv (CS.CL) 2026-06-18 DOI: arXiv:2606.18620

BCL: Bayesian In-Context Learning Framework for Information Extraction

Authors:

Haoliang Liu ↗Chengkun Cai ↗Xu Zhao ↗Han Zhu ↗Shizhou Huang ↗Xinglin Zhang ↗Tao Chen ↗Jenq-Neng Hwang ↗Zhang Huaping ↗Lei Li ↗

Existing information extraction (IE) tasks increasingly adopt in-context learning (ICL) with large language models. However, current approaches either show inconsistent performance across model scales or lack systematic optimization and generalizability. Building on this, we propose BCL (Bayesian In-Context Learning Framework for Information Extraction), the first optimization framework that uses particle filtering with Bayesian updates to systematically refine label representations across IE tasks. Through four steps initialization, observation, weight update, and resampling, BCL generalizes to both sequence labeling and relation classification paradigms. Extensive experiments demonstrate substantial and consistent improvements over existing approaches.

Read & Discuss → View Source →

15.

arXiv (CS.CL) 2026-06-18 DOI: arXiv:2606.18264

Simulating Hate Speech Cascades with Multi-LLM Agents: Empirical Grounding, Modeling Fidelity, and Intervention Strategies

Authors:

Fan Huang ↗

Faithful modeling of hateful content propagation on online platforms remains an open problem for moderation research. Classical cascade models that do not explicitly represent the profile, community, and content factors associated with hateful-content propagation may yield moderation strategies that behave less effectively when deployed in real-world scenarios. Multi-agent large language model (LLM) systems can, in principle, make each reshare decision depend on the user's profile, the surrounding community, and the post's content, but it remains unclear whether this added flexibility actually reproduces real hateful cascades more faithfully than classical baselines. We study three hateful Bluesky cascades and a size-matched benign control. In the empirical Bluesky data, we found that: 97.4–99.7\% of reposters take a hostile stance; toxicity-engagement homophily is higher on the diffusion tree than on the follower graph for hateful cascades; topology is star-like for the hateful cascades (most reposts come directly from the root) versus tree-like for the benign cascade (reposts propagate through multi-hop chains). In simulation, a multi-LLM-agent simulator reproduces the stance monoculture and the toxicity-delta direction. A structured ablation identifies agent heterogeneity as the leading fidelity factor, and amplifier targeting on dense networks yields 7.5–12.9\% reduction at 5.7\% benign collateral.

Read & Discuss → View Source →

16.

arXiv (math.PR) 2026-06-16 DOI: arXiv:2601.11422

Stein's method for the matrix normal distribution

Authors:

Robert E. Gaunt ↗Fr\'ed\'eric Ouimet ↗Donald Richards ↗

arXiv:2601.11422v2 Announce Type: replace-cross Abstract: This work presents the first systematic development of Stein's method for matrix distributions. We establish the basic essential ingredients of Stein's method for matrix normal approximation: we derive an extended-generator-based Stein identity from a matrix Ornstein-Uhlenbeck diffusion with two-sided scales, provide an explicit semigroup representation for the solution of the Stein equation, and obtain regularity estimates for the solution. The new methodology is demonstrated in three examples: (i) smooth Wasserstein distance bounds to quantify the matrix central limit theorem (a didactic example), (ii) a Wasserstein distance bound for the matrix normal approximation of the centered matrix $T$ distribution, and (iii) a Stein's method-of-moments approach to estimating the row and column covariance factors of the matrix normal, yielding a flexible class of weighted flip-flop Stein estimators that generalize Dutilleul's classical flip-flop algorithm and naturally accommodate row/column importance weights, systematic missingness, and projection onto structured covariance families. The latter two examples are intrinsically matrix-valued and cannot be treated using naive vectorization.

Read & Discuss → View Source →

17.

arXiv (math.PR) 2026-06-11 DOI: arXiv:2606.11282

The Statistical Compass

Authors:

Eliuvish Han Cui ↗

arXiv:2606.11282v1 Announce Type: cross Abstract: This monograph develops probability and stochastic-process ideas as a translation language for statistics: from designed observations and data objects to targets, stability statements, inference, and use. The chapters move from motivating examples and randomization through probability measures, kernels, likelihoods, data objects, weak convergence, empirical fields, functional data, M- and Z-estimation, testing, local approximations, event-time processes, and prediction. Historical and biomedical examples are used to keep abstract objects tied to records, mechanisms, and decisions. The aim is to give readers a common grammar for classical probability, modern data structures, and statistical practice.

Read & Discuss → View Source →

18.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2606.16960

SurroundNEXO: Ego-Centric Metric Bridging for Spatially Consistent Geometry in Autonomous Driving

Authors:

Shuai Yuan ↗Runxi Tang ↗Yuzhou Ji ↗Fudong Ge ↗Hanshi Wang ↗Yifei Wang ↗Xianming Zeng ↗Jianyun Xu ↗Xingliang Liu ↗Yanfeng Wang ↗Zhipeng Zhang ↗

Modern autonomous driving depends on accurate metric 3D understanding for perception, reconstruction, and planning, which in turn requires reliable multi-camera depth prediction. However, the outward-facing nature of vehicle-mounted surround-view camera rigs inherently limits visual overlap across views, challenging the correspondence-based assumptions that underpin conventional multi-view geometry. To bridge this gap, we present SurroundNEXO, named after the Spanish word nexo for a geometric link, a low-overlap multi-camera metric depth framework that grounds cross-view reasoning in ego-centric geometry rather than dense visual correspondences. Instead of directly enforcing early global fusion, SurroundNEXO first assigns image tokens globally comparable ego-frame viewing directions through Ego-Ray Positional Encoding, then uses sparse LiDAR measurements as metric anchors to propagate absolute scale cues, and finally expands feature interaction progressively from view-local modeling to decomposed spatio-temporal reasoning and global integration. This design enables metric-scale depth prediction with improved spatial consistency across weakly overlapping cameras. Across low-overlap autonomous driving benchmarks, including NuScenes, Waymo and DDAD, SurroundNEXO reduces single-view error by 33.2%, improves cross-view consistency by 10.5%, and enhances metric reconstruction quality by 25.6% compared with SOTA methods. It further remains robust under extremely sparse depth prompts and exhibits strong zero-shot generalization to unseen camera layouts.

Read & Discuss → View Source →

19.

arXiv (CS.CV) 2026-06-12 DOI: arXiv:2606.13432

OmniDirector: General Multi-Shot Camera Cloning without Cross-Paired Data

Authors:

Jiwen Liu ↗Shujuan Li ↗Zhixue Fang ↗Xiaohan Li ↗Yan Zhou ↗Zijie Meng ↗Zhimin Zhang ↗Yawen Luo ↗Guoxin Zhang ↗Yu-Shen Liu ↗Pengfei Wan ↗

Cloning camera motion from reference videos is an important task in video generation, as videos provide intuitive and precise control. Existing methods either directly use parametric representations that fail to handle multi-shot generation or synthesize cross-paired data, which suffer from data scarcity, resulting in poor performance in complicated camera motion cloning. To address these issues, we introduce a general camera motion representation that encodes cameras as grid motion videos. This camera grid represents the camera parameters visually and supports the integration of diverse trajectories for multi-shot video generation. Building upon this, we propose OmniDirector, a unified framework trained on a million-scale camera grid-video pairs that coordinates characters, actions, and cameras to provide director-level control for multimodal diffusion transformers. Furthermore, we design a novel hierarchical prompt expansion agent that harmoniously integrates different control signals by systematically describing camera motion and visual content through understanding signal relationships. Extensive experiments demonstrate the superior performance and outstanding controllability of our framework. Project page: https://ymlinfeng.github.io/OmniDirector.github.io/

Read & Discuss → View Source →

20.

arXiv (CS.LG) 2026-06-17 DOI: arXiv:2602.03045

Clarify Before You Draw: Proactive Agents for Robust Text-to-CAD Generation

Authors:

Bo Yuan ↗Zelin Zhao ↗Petr Molodyk ↗Bin Hu ↗Yongxin Chen ↗

arXiv:2602.03045v2 Announce Type: replace Abstract: Large language models have recently enabled text-to-CAD systems that synthesize parametric CAD programs (e.g., CadQuery) from natural-language prompts. In practice, however, geometric descriptions can be under-specified or internally inconsistent: critical dimensions may be missing and constraints may conflict. However, existing fine-tuned models tend to reactively follow the user instructions and hallucinate dimensions when the text is ambiguous. To address this, we propose a proactive agentic framework for text-to-CadQuery generation, named as ProCAD, that resolves specification issues before code synthesis. Our framework pairs a proactive clarifying agent, which audits the prompt and asks targeted clarification questions only when necessary to produce a self-consistent specification, with a CAD coding agent that translates the specification into an executable CadQuery program. We fine-tune the coding agent based on a curated high-quality text-to-CadQuery dataset and train the clarifying agent via agentic SFT on clarification trajectories. Experiments show that proactive clarification significantly improves robustness to ambiguous prompts while keeping interaction overhead low. ProCAD outperforms frontier closed-source models, including Claude Sonnet 4.5, reducing the mean Chamfer distance by 79.9% and lowering the invalidity ratio from 4.8% to 0.9%. Our code and datasets are made publicly available on https://github.com/BoYuanVisionary/Pro-CAD.

Read & Discuss → View Source →

21.

arXiv (CS.CV) 2026-06-17 DOI: arXiv:2606.17482

SPHINX: First Explain, Then Explore

Authors:

Nguyen Do ↗Tue M. Cao ↗Tien Van Do ↗Andr\'as Hajdu ↗Tam\'as B\'erczes ↗My T. Thai ↗

Generating adversarial driving scenarios is critical for evaluating and improving autonomous vehicle decision-making systems in simulation. Recent approaches, such as ChatScene and LLM-Attacker, rely primarily on the prior knowledge of Large Language Models and Vision-Language Models to generate driving scenarios procedurally. We argue that adversarial scenes should be generated based on the failure diagnosis (e.g., indecisiveness, multi-frame inconsistency) of the driving policy to specifically address the policy's weaknesses instead of relying on prior assumptions. In this paper, we propose SPHINX, a closed-loop framework for adversarial scenario synthesis guided by a simple principle: first explain, then explore. Beyond blindly exploring the scenario space, SPHINX leverages explainable artificial intelligence methods to analyze the policy, identifying key visual concepts and their influence on policy outputs, and the uncertainty of the decisions. Given the interpretable evidence extracted from the policy's own decision process, we use a vision language model to rationalize and criticize failure modes of the current policy. These critics are then used to generate targeted adversarial scenarios for policy retraining and improvement. We demonstrate that SPHINX can highlight an interpretable account of policy failures while other adversarial scene generation cannot. Across the evaluated benchmarks and test suites, SPHINX can be applied to diverse state-of-the-art autonomous vehicle architectures and yields consistent robustness improvements over existing scenario-generation methods.

Read & Discuss → View Source →

22.

arXiv (CS.CV) 2026-06-24 DOI: arXiv:2606.24057

EPEdit: Redefining Image Editing with Generative AI and User-Centric Design

Authors:

Hoang-Phuc Nguyen ↗Dinh-Khoi Vo ↗Trong-Le Do ↗Hai-Dang Nguyen ↗Tan-Cong Nguyen ↗Vinh-Tiep Nguyen ↗Tam V. Nguyen ↗Khanh-Duy Le ↗Minh-Triet Tran ↗Trung-Nghia Le ↗

The demand for image manipulation has seen a significant increase recently. Traditional tools like Photoshop and Capture One, while powerful, require considerable expertise to use effectively. Generative AI has introduced alternative platforms, such as Luminar Neo, Pixlr X, and Canva. However, many of these solutions, including resource-heavy models like Stable Diffusion, often require substantial retraining and fine-tuning, leading to high costs for users. To address these challenges, we introduce Efficient Photo Editor (EPEdit), an application that integrates a robust backend framework with a user-friendly front-end interface. EPEdit supports a wide range of creative image editing tasks, including image generation, object replacement, object removal, background modification, changes in object pose or perspective, region-specific editing, and thematic collection design, all guided by masks and prompts. Users can interact with the system through simple text commands or by marking areas for precise adjustments, making it accessible even to those without technical expertise. At its core, EPEdit leverages zero-shot image editing algorithms based on Stable Diffusion model, removing the need for additional fine-tuning. This approach enables efficient image manipulation and thematic collection creation. User evaluations for tasks of image editing, thematic design, and overall system performance demonstrate that EPEdit outperforms existing solutions, offering a user-friendly, cost-effective solution for comprehensive image editing.

Read & Discuss → View Source →

23.

arXiv (CS.LG) 2026-06-24 DOI: arXiv:2606.24543

Reasoning as Attractor Dynamics: Latent Memory Retrieval via Gibbs-Weighted Energy Minimization

Authors:

Kanishk Awadhiya ↗

arXiv:2606.24543v1 Announce Type: new Abstract: Large Language Models (LLMs) are traditionally viewed as autoregressive generators. However, from the perspective of collective computation, they function as high-dimensional Dense Associative Memories that store complex reasoning patterns as latent attractors. In this work, we investigate the energy landscape of mathematical reasoning. We posit that correct reasoning chains correspond to deep, wide attractor basins ("flat minima") in the model's output distribution, whereas hallucinations manifest as sharp, unstable local minima. To exploit this geometry, we introduce a retrieval mechanism based on a Gibbs measure of the trajectory's spectral entropy. By sampling multiple reasoning paths and weighting them by their inverse energy ($P \propto e^{-\beta E}$), we approximate the equilibrium distribution of the associative memory, effectively ``relaxing'' the system into a robust solution. Empirically, this physics-inspired mechanism improves Microsoft Phi-3.5 performance on GSM8K by 5.38\% (84.7\% $\to$ 90.1\%), demonstrating that inference is better modeled as a dynamic settling process into an attractor basin rather than greedy next-token prediction.

Read & Discuss → View Source →

24.

arXiv (CS.AI) 2026-06-19 DOI: arXiv:2606.05833

Learning Geometric Representations from Videos for Spatial Intelligent Multimodal Large Language Models

Authors:

Haibo Wang ↗Lifu Huang ↗

arXiv:2606.05833v2 Announce Type: replace-cross Abstract: Multimodal Large Language Models (MLLMs) excel at 2D semantic understanding but lack intrinsic 3D awareness, resulting in representations that fail to maintain geometric and spatial consistency across video frames. Given the scarcity of large-scale 3D data, we present GeoVR, a novel framework that learns geometric representations using purely 2D video sequences. This approach effectively restructures the semantic latent space within MLLMs to unlock spatial intelligence. Rather than employing superficial feature mixing, GeoVR reshapes the internal representations of the MLLM by distilling geometry knowledge from pre-trained 3D foundation models. This is accomplished through a multi-objective learning strategy driven by four complementary geometric targets: (1) estimating inter-frame camera poses to embed varying viewpoint dynamics, (2) regressing dense depth maps to anchor physical distances, (3) predicting a metric scale factor for real-world calibration, and (4) distilling multi-scale 3D features to align the intermediate feature space. Guided by these explicit physical and geometric constraints, the model's internal representations naturally develop strong 3D awareness. Extensive experiments on spatial reasoning benchmarks demonstrate that GeoVR achieves state-of-the-art performance, establishing a new paradigm for endowing foundation models with spatial intelligence.

Read & Discuss → View Source →

25.

arXiv (CS.AI) 2026-06-16 DOI: arXiv:2606.16456

SPRI: SVD-Partitioned Residual Initialization for Data-Constrained MoE Upcycling

Authors:

Weiqiao Shan ↗Ruixiang Mao ↗Yuang Li ↗Yuhao Zhang ↗Yingfeng Luo ↗Tong Zheng ↗Chen Xu ↗Yucheng Qiao ↗Chunxiang Jin ↗Yi Yuan ↗Jingdong Chen ↗Tong Xiao ↗…

arXiv:2606.16456v1 Announce Type: cross Abstract: Mixture-of-Experts (MoE) models enable efficient scaling, but training them from scratch remains prohibitively expensive. MoE upcycling mitigates this cost by converting pretrained dense models into sparse MoE models. However, existing upcycling methods typically rely on large-scale continued training and often perform poorly under data-constrained supervised adaptation, due to either homogeneous experts or overly disruptive perturbations to pretrained parameters. In this setting, effective upcycling must leverage pretrained weight structure while introducing sufficient diversity among routed experts. To this end, we propose SVD-Partitioned Residual Initialization (SPRI), which distributes SVD-partitioned residuals derived from pretrained feed-forward network (FFN) weights across routed experts, introducing controlled expert diversity grounded in pretrained spectral structure. We further introduce a two-stage training strategy to improve adaptation stability. We evaluate SPRI on multilingual speech-to-text translation, where limited supervised data challenges MoE upcycling and multiple target languages provide natural routing heterogeneity. On CoVoST2 across 15 En-to-XX directions, SPRI improves average BLEU and COMET over fully fine-tuned dense models by 2.58 and 3.32 points, respectively, and outperforms the prior best MoE upcycling baseline by 3.39 BLEU and 4.34 COMET points.

Read & Discuss → View Source →

Explore the Frontier of Global Academia