中 EN
Sign In Register

Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

Sign In Register
01.
arXiv (CS.AI) 2026-06-16

The Energy Blind Spot: NVIDIA's Flagship Edge AI Hardware Cannot Support Process-Level Energy Attribution

Authors:
Deepak Panigrahy↗Aakash Tyagi↗

arXiv:2605.27599v2 Announce Type: replace-cross Abstract: Agentic AI workloads - where a single user goal triggers multi-step orchestration, tool calls, retries, and failure recovery - are being targeted for edge deployment, with NVIDIA, Dell, HP, ASUS, MSI, Acer, and Gigabyte all shipping GB10-based desktop AI systems in 2026. We recently demonstrated that orchestration structure dominates agentic energy cost, with workflows consuming 4.33x more energy per successful goal than linear baselines and OOI reaching 7.63x for multi-step reasoning tasks. Separately, Raj et al. show that CPU-side processing accounts for up to 90.6% of total latency and 44% of total dynamic energy in agentic workloads. We report a systematic energy-observability audit of the ASUS Ascent GX10 (GB10 SoC) and find that the platform exposes no CPU energy counter, no INA power-rail monitor, no IPMI/BMC, and no SCMI powercap protocol through any supported software interface. The only on-device energy telemetry is instantaneous GPU power via NVML. We further discover that the MediaTek firmware already computes per-rail energy internally via an undocumented ACPI interface (SPBM), but NVIDIA states there are "no plans to expose CPU rail information." On-device per-process energy attribution - as performed on x86 via RAPL - is therefore not reproducible on this platform through supported interfaces. We formalize a hardware requirements specification for energy-attributed AI, propose an interim calibration bridge for per-domain energy decomposition - confirmed on the Acer Veriton GN100 where CPU energy accumulators are live - and identify a standards-track path via SCMI powercap. Our findings motivate the low-carbon computing community to demand energy observability as a first-class hardware requirement.

Read & Discuss → View Source →
02.
arXiv (CS.CV) 2026-06-11

From Nominal Intensity to Equivalent Rainfall: A Path-Based Credibility Evaluation Framework for Simulated Rainfall in Autonomous-Driving Perception Tests

Authors:
Tian Xia↗Xin Zhao↗Shaolingfeng Ye↗Junyi Chen↗

Credible simulated-rainfall conditions are essential for identifying perception-system boundaries and supporting SOTIF-oriented risk assessment in automated driving. However, closed-field tests are often described only by nominal rainfall intensity or single-point measurements, making it difficult to align simulated rain fields with real rainfall and map test results to real-world scenarios. This paper proposes a path-based credibility evaluation method for simulated rainfall in autonomous-driving perception tests. Using the drop size and velocity joint distribution of real rainfall as the reference, each candidate path is represented by path-equivalent rainfall intensity, an uncertainty band, and a path-averaged Realism of Raindrop Distribution (RRD) score. Lidar target point-cloud count and mean reflectivity are further used for perception-consistency correction, quantifying the proxy capability of each simulated-rainfall path for real-rainfall perception effects. Experiments are conducted using about 10,000 real-rainfall raindrop-spectrum samples, 728 RainSense perception samples, and 45 spatial sampling points in a 2.4 m x 7.2 m simulated-rainfall area. Results show that spatial non-uniformity remains under the same nominal condition, confirming the need for path-based evaluation. The method identifies Path IV and Path VI as preferable candidates, with results of 11.54 +/- 0.31 mm/h, RRD = 0.43, and 8.28 +/- 0.34 mm/h, RRD = 0.46, respectively. These paths show more balanced performance in rainfall-intensity stability, raindrop-spectrum realism, and perception consistency. The proposed method supports path selection, condition description, and credible interpretation of autonomous-driving perception tests under rainfall.

Read & Discuss → View Source →
03.
arXiv (CS.CL) 2026-06-18

Graph-ESBMC-PLC: Formal Verification of Graphical PLCopen XML Ladder Diagram Programs Using SMT-Based Model Checking

Authors:
Pierre Dantas↗Lucas Cordeiro↗Waldir Junior↗

PLCopen XML defines two encoding formats for IEC 61131-3 Ladder Diagram programs: a textual encoding using elements, and a graphical encoding that represents rung logic as a directed graph of localId/refLocalId connections. ESBMC-PLC supported the textual format but parsed graphical exports from CONTROLLINO, Beremiz, and OpenPLC Editor into an empty GOTO intermediate representation, causing vacuous verification success. This paper presents Graph-ESBMC-PLC, which closes this gap with a DFS-based graphical LD resolver. The resolver traverses the connection graph from leftPowerRail to each coil, extracts rung paths as Boolean contact conjunctions, and applies a three-tier I/O inference scheme. Ordering coils by rightPowerRail connectionPointIn sequence ensures SET coils process before RESET coils, matching IEC scan-cycle semantics. The graphical-to-IR conversion leaves the ESBMC backend unchanged. Validation on 3 graphical LD programs from CONTROLLINO/OpenPLC Editor shows all produce full GOTO IR with nondeterministic inputs and rung logic, versus the empty IR previously. All 3 verify SAFE at k=2 under 70ms. The 11 textual LD benchmarks are fully preserved, with no regression. Two Beremiz examples with no LD content or unsupported timer semantics are reported as discovered limitations. Artifact at Zenodo (DantasCordeiro2026graphical, doi:10.5281/zenodo.20699856).

Read & Discuss → View Source →
04.
arXiv (CS.CL) 2026-06-18

RCEM: Robust Conversational Search EMbedder in Distributional Shift

Authors:
Kilho Son↗Paul Hsu↗Cha Zhang↗Dinei Florencio↗

We propose RCEM, a Robust Conversational search EMbedder that is additionally equipped with LLM's query reformulation capability without losing base model's generalization. Unlike prior conversational dense retrieval approaches that learn direct conversation-to-passage matching, RCEM aligns conversations, prepended by special token, to LLM-rewritten queries, while preserving the original embedding space. The unchanged embedding space automatically maps the rewritten-query to the relevant passages. As a result, RCEM (1) reduces overfitting by simplifying the alignment task from long passages to shorter rewritten queries, (2) eliminates the need for conversation-to-passage relevance labels for training, and (3) maintains its original embedding space that allows conversational queries against indexes built by original embedder without rebuilding them. Extensive experiments show that RCEM consistently outperforms prior approaches, achieving up to 30% improvement under distributional shift.

Read & Discuss → View Source →
05.
arXiv (CS.LG) 2026-06-19

Full-Self Diagnostics (FSD): Physics-Grounded Visual Biomarker Inference from Smartphone Video via Inverse Problems and Operator Learning

Authors:
Jonathan Thomas↗Harsh Thaker↗

arXiv:2606.19372v1 Announce Type: cross Abstract: We present Full-Self Diagnostics (FSD), a unified mathematical framework for recovering latent physiological states from unconstrained 9-second facial videos captured by consumer smartphones. The approach integrates five mutually reinforcing components: (1) a physics-based forward model derived from the radiative transfer equation and chromophore absorption that maps camera observables to biomarker concentrations; (2) an information-theoretic observability theory proving that multi-channel visual signals (spectral, pulse, respiratory, micro-expression, and oculomotor) contain strictly increasing mutual information with physiological state; (3) a stable, Tikhonov-regularized inverse problem with domain-uniform identifiability guarantees; (4) an operator-learning formulation that enables generalization across devices, resolutions, and populations; and (5) a supervised learning procedure, interpretable as stochastic variational inference, that continuously refines the model from paired biosensor ground truth with performance improving proportionally to one over the square root of the number of paired observations. Empirical validation on 38812 real-world paired scans across 59 subjects demonstrates practical performance. Self-collected data from the lead author (glucose range 35-550 mg/dL) yields MARD of 29.86 percent with 97.57 percent of predictions in Clarke Error Grid Zones A+B and only 0.27 percent in the dangerous Zone E. A well-managed diabetic participant achieves MARD of 17 percent in the narrower 70-180 mg/dL band. These results confirm that consumer-grade facial video encodes sufficient structured information for clinically relevant, non-invasive biomarker inference under fully unconstrained conditions, with performance scaling predictably as more paired data becomes available.

Read & Discuss → View Source →
06.
arXiv (quant-ph) 2026-06-17

Approximately Decoding the Colour Code

Authors:
Mark Walters↗

arXiv:2606.18035v1 Announce Type: new Abstract: Recently we showed that minimum weight decoding in the (6.6.6 planar) colour code is NP-hard. However, it remained an open question as to whether it was possible to approximate the minimum weight decoding arbitrarily closely in polynomial time. In this paper we prove that it is possible: for any $\varepsilon>0$ there is an polynomial time algorithm that, given a syndrome, can find an error-set generating that syndrome whose weight is at most $1+\varepsilon$ times the weight of the minimum weight decoding. As a consequence we see that, for any $\varepsilon>0$, there is a polynomial time algorithm that can correct all errors of weight up to $(1-\varepsilon)d/2$ in the distance $d$ colour code (so almost up to the theoretical $d/2$ limit). The polynomial we give is impractically large, but it does open the door for sensible polynomial time algorithms that approximate minimum weight decoding and, in particular, shows that approximate decoding is not NP-hard.

Read & Discuss → View Source →
07.
arXiv (CS.AI) 2026-06-11

Sparse probes and murky physics: a case study of interpretability challenges in a foundation model for continuum dynamics

Authors:
Katherine Rosenfeld↗Maike Sonnewald↗

arXiv:2606.11657v1 Announce Type: cross Abstract: Generative AI emulators are increasingly used in scientific domains where we already have strong theory, benchmarks, and physical intuition. This raises a central evaluation and interpretability question: when a foundation-style model can reproduce known continuum dynamics, what internal mechanism supports that behavior, is the internal behaviour consistent with known physics, and how does it relate to where the emulator succeeds or fails? We investigate a cross-domain foundation model for continuum dynamics, Walrus by Polymathic, using mechanistic interpretability guided by physical principles. We apply a sparse autoencoder (SAE) to probe a selected layer, and address the practical challenge of triaging a large feature set (over 20,000) using enstrophy as a physically grounded metric. As a deliberately simple testbed, we focus on shear flow and compare feature recruitment across multiple shear-flow setups, i.e. parameter values in the numerical simulation. Across setups we find evidence of piecewise consistency, with subsets of features recurring in similar roles, but this structure is intermittent and does not map cleanly onto standard physical decompositions. In parallel, direct comparisons between numerical simulation and the emulator reveal systematic output-level discrepancies, including regimes where energy/structures become too diffuse or too localized. We connect parts of these discrepancies to changes in specific SAE feature usage. Our work highlights open questions for scientific foundation models: how to robustly prioritize mechanistically meaningful features, how to separate stable structure from analysis artifacts (including single-layer and SAE limitations), and how to use established benchmarks to decide when "different" internal representations are genuinely informative rather than merely effective.

Read & Discuss → View Source →
08.
arXiv (CS.LG) 2026-06-15

Nonlocal Bayesian Modeling of Continuous Spatio-Temporal Dynamics

Authors:
Jaeyeong Lee↗Heeyoung Kim↗

arXiv:2606.14313v1 Announce Type: cross Abstract: Real-world spatio-temporal forecasting must handle irregular time points, spatially sparse observations, and the need for uncertainty quantification. This setting is often further compounded by nonlocal interactions (long-range spatial coupling). Modeling continuous-space, continuous-time nonlocal dynamics naturally leads to infinite-dimensional integro-differential equations (IDEs), making principled Bayesian inference intractable. We propose the NonLocal Bayesian Spatio-Temporal model (NLBST), a hierarchical Bayesian framework for continuous spatio-temporal fields that learns explicit nonlocal coupling while retaining tractable inference. NLBST represents the latent field via a coordinate-based spatial basis expansion and models the coefficient process with a continuous-time ODE whose learnable linear operator corresponds to a Galerkin reduction of a nonlocal IDE; a Neural ODE residual captures additional nonlinear dynamics. A linear-Gaussian observation model enables Kalman-style sequential updates under missing and irregular observations, while the spatial basis representation enables inductive prediction at unmeasured locations without retraining. Global parameters are learned via variational inference, and uncertainty is handled through a Bayesian hierarchy. Experiments on synthetic and real-world datasets demonstrate strong forecasting and spatial generalization with well-calibrated uncertainty, yielding substantial gains over baselines in strongly nonlocal and partially observed regimes.

Read & Discuss → View Source →
09.
bioRxiv (Bioinfo) 2026-06-17

DesignMaster: A Multi-Conditional Diffusion Framework for Rational PROTAC Design

Authors:
Shi↗Liu↗Pan↗Hao↗Isbel↗Roy↗M. J↗Ng↗A. P↗Shang↗Li↗

Motivation: Proteolysis-targeting chimeras (PROTACs) enable targeted protein degradation through ternary complex formation with E3 ubiquitin ligase. However, the rational design of PROTACs remains highly challenging due to limited structure-activity relationship data and the vast conformational diversity of linkers. Existing computational approaches can be broadly divided into structure-based ternary modelling methods and fragment-based linker generation models. Although these approaches have advanced PROTAC design, they typically neglect key physicochemical constraints and linker-length control during the generation process, causing the generated PROTACs to lack balanced structural properties required for effective ternary complex formation with drug-like characteristics. Results: To address these limitations, we propose DesignMaster, a diffusion-based generative framework that explicitly incorporates linker length and physicochemical properties as controllable conditioning signals. DesignMaster employs an E(3)-equivariant graph Transformer with a gated multi-condition fusion module to inject linker length and physicochemical constraints throughout the diffusion process, enabling fine-grained and constraint-aware molecular generation. Experiments on PROTAC-DB 2.0 and 3.0 demonstrate that DesignMaster outperforms state-of-the-art baselines, with a 3.2% improvement in validity and a 34.4% improvement in recovery. The Case study shows DesignMaster achieves a 51.78% reduction in RMSD when predicting the linker of PROTAC BCPyr targeting 6W7O, highlighting its potential for practical structure-guided PROTAC design. Availability: The source code and datasets are available at https://github.com/ABILiLab/DesignMaster.

Read & Discuss → View Source →
10.
arXiv (CS.LG) 2026-06-19

Comparative Study of Neural Surrogate Architectures for Autoregressive Prediction of Internal Battery States

Authors:
Gihyun Lee↗Thorben Menne↗Simon Olma↗Jakob Hilgert↗Sangyoung Park↗

arXiv:2606.20053v1 Announce Type: new Abstract: The Doyle-Fuller-Newman (DFN) model resolves internal electrochemical states in lithium-ion batteries with high fidelity. However, the numerical solution of its governing equations is computationally prohibitive for real-time deployment, limiting scalability from individual cells to pack and fleet-scale applications. While machine learning surrogates can substantially reduce inference latency through GPU acceleration, most existing approaches learn solution approximations tied to specific operating conditions rather than learning generalizable state-evolution dynamics. This work presents a systematic comparison of four neural network architectures (MLP, ResNet, U-Net, FNO) formulated as autoregressive state-transition operators that predict full DFN internal states across a wide range of operating conditions. To ensure a controlled architectural comparison, all models are trained under a unified framework using multi-step unrolling and current-conditioning, isolating the impact of spatial inductive bias. Results demonstrate that the U-Net's multi-scale feature hierarchy achieves a mean final-step nRMSE of 3% averaged across all internal state variables after 300-step autoregressive rollouts, while providing a 5.38x speed-up over the numerical solver. These findings highlight spatial inductive bias as a critical determinant of surrogate performance, advancing the development of surrogates for internal state observability for next-generation battery management systems and digital twins.

Read & Discuss → View Source →
11.
arXiv (CS.LG) 2026-06-12

Robust State-Conditional Feature-Weighted Jump Models for Temporal Clustering

Authors:
Federico P. Cortese↗Alessio Farcomeni↗

arXiv:2606.13146v1 Announce Type: cross Abstract: We propose a robust feature-weighted jump model for time-dependent clustering. A penalty is used to encourage smoothness of transitions over time, while robustness is achieved through the use of a Tukey's biweight loss function. An additional parameter controls the variability of feature weights across states, allowing the model to assign state-specific relevance to each feature. We illustrate in simulation how the method accurately recovers the true cluster sequence and reliably identifies relevant features, outperforming competing approaches, particularly in the presence of outliers. We conclude with two empirical applications, one on the number of conflict-related homicides in Kosovo in the period 1998-2000, and another on macroeconomic performance of twelve European countries in the period 1949-2024.

Read & Discuss → View Source →
12.
arXiv (CS.CL) 2026-06-16

Evaluating LLM Personalization via Semantic Constraint Verification

Authors:
Xuran Li↗Guanqin Zhang↗Imran Razzak↗Hakim Hacid↗Eleanna Kafeza↗Hao Xue↗Flora D. Salim↗

Current evaluation paradigms for Large Language Model (LLM) personalization rely heavily on brittle surface-matching metrics or computationally expensive LLM-as-a-judge protocols, both of which lack interpretability. To address these limitations, we introduce Natural Language Inference Constraint Verification (NLICV), a scalable, semantically invariant framework that maps sentence meanings to truth-condition sets to verify personalization constraints via a Natural Language Inference (NLI) model. Moving beyond binary scoring, NLICV categorizes LLM behaviors into four distinct modes: personalization, generalization, sycophancy, and failure. Extensive experiments demonstrate that NLICV aligns closely with human annotations while drastically reducing the latency and token costs associated with LLM judges (up to 2100 inference speedup). Finally, through an ablation-based procedure, NLICV pinpoints the exact sentences driving the constraint verification, yielding faithful, understandable evidence for its evaluations.

Read & Discuss → View Source →
13.
arXiv (CS.AI) 2026-06-15

When Sample Selection Bias Precipitates Model Collapse

Authors:
Xinbao Qiao↗Xianglong Du↗Wei Liu↗Jingqi Zhang↗Peihua Mai↗Meng Zhang↗Yan Pang↗

arXiv:2606.13732v1 Announce Type: new Abstract: The proliferation of recursive training on synthetic data can alleviate data scarcity but risks model collapse, where repeated training erodes distributional tails and homogenizes outputs. Data selection is widely viewed as a remedy, yet its reliability depends critically on the reference distribution used by the verifier. We show that in low-resource verification regimes, where each verifier observes only a small, fragmented, and biased slice of the target manifold, selection itself becomes biased. This situation naturally arises in low-resource data silos such as healthcare consortia or proprietary financial institutions, where raw data cannot be pooled and local references are inherently incomplete. As a result, selection preferentially retains samples aligned with the local manifold while pruning globally relevant tail modes, turning from a safeguard against collapse into a mechanism that precipitates it. We theoretically prove that such siloed selection accelerates collapse and induces power-law diversity decay. As an initial mitigation, we construct Wasserstein proxy references from multiple silos without sharing raw data. Empirical results confirm that local-reference selection fails on skewed distributions, whereas collaborative proxy references mitigate diversity degradation, suggesting that recursive synthetic-data pipelines require particular caution when real-data coverage is fragmented or scarce.

Read & Discuss → View Source →
14.
arXiv (CS.AI) 2026-06-18

Essential Subspace Merging for Multi-Task Learning

Authors:
Longhua Li↗Lei Qi↗Xin Geng↗Qi Tian↗

arXiv:2606.19164v1 Announce Type: cross Abstract: Model merging aims to enable multi-task learning by integrating the capabilities of multiple models fine-tuned from the same pre-trained checkpoint into a single model. Its core challenge is inter-task interference among task-specific parameter updates. In this paper, we analyze the output shifts induced by task updates and observe that their energy is concentrated in a small number of principal directions. We call the subspace spanned by these directions the essential subspace. In contrast, most remaining directions carry little task-relevant energy, but their accumulation across multiple task updates can cause severe interference during merging. Motivated by this observation, we propose Essential Subspace Decomposition (ESD), which decomposes each task update according to the principal components of its activation shift. Based on ESD, we introduce Essential Subspace Merging (ESM), a training-free static merging method that orthogonalizes and fuses essential components into one compact multi-task model. We further extend ESM to ESM++, a training-free dynamic merging method that decomposes task-specific residuals into low-rank experts and selects the most relevant expert through prototype-based routing during forward inference. Extensive experiments across multiple task sets and model scales demonstrate that ESM and ESM++ effectively preserves task knowledge while reducing inter-task interference.

Read & Discuss → View Source →
15.
arXiv (CS.AI) 2026-06-11

A Resilient Solution for Sewer Overflow Monitoring across Cloud and Edge

Authors:
Vipin Singh↗Tianheng Ling↗Peter Ghaly↗Felix Grimmeisen↗Gregor Schiele↗Felix Biessmann↗

arXiv:2605.10592v2 Announce Type: replace Abstract: Aging combined sewer systems in many historical cities are increasingly stressed by extreme rainfall events, which can trigger combined sewer overflows (CSO) with significant environmental and public health impacts. Forecasting the filling dynamics of overflow basins is critical for anticipating capacity exceedance and enabling timely preventive actions for CSO. We present a web-based demonstrator that integrates Deep Learning forecasting methods in both cloud and edge settings into an interactive monitoring dashboard for overflow monitoring, resilient to network outages. A video showcase is available online (https://cloud.bht-berlin.de/index.php/s/b9xt4T3SdiLBiFZ).

Read & Discuss → View Source →
16.
arXiv (CS.CL) 2026-06-11

ASRU: Activation Steering Meets Reinforcement Unlearning for Multimodal Large Language Models

Authors:
Jiahui Guang↗Haiyan Wang↗Yingjie Zhu↗Cuiyun Gao↗Jing Li↗Di Shao↗Zhaoquan Gu↗

Multimodal large language models (MLLMs) may memorize sensitive cross-modal information during pretraining, making machine unlearning (MU) crucial. Existing methods typically evaluate unlearning effectiveness based on output deviations, while overlooking the generation quality after unlearning. This can easily lead to hallucinated or rigid responses, thereby affecting the usability and safety of the unlearned model. To address this issue, we propose ASRU, a controllable multimodal unlearning framework that incorporates generation quality as a core evaluation objective. ASRU first induces initial refusal behavior through activation redirection, and then optimizes fine-grained refusal boundaries using a customized reward function, thereby achieving a better trade-off between target knowledge unlearning and model utility. Experiments on Qwen3-VL show that ASRU significantly improves unlearning effectiveness (+24.6%) on average and generation quality (5.8X) on average while effectively preserving model utility, using only a small amount of retained supervision data.

Read & Discuss → View Source →
17.
arXiv (CS.CL) 2026-06-16

GePBench: Evaluating Fundamental Geometric Perception for Multimodal Large Language Models

Authors:
Shangyu Xing↗Changhao Xiang↗Yuteng Han↗Yifan Yue↗Zhen Wu↗Xinyu Liu↗Zhangtai Wu↗Fei Zhao↗Xinyu Dai↗

Geometric shapes play important roles in both physical world and human cognition. While multimodal large language models (MLLMs) have made significant advancements in visual understanding, their abilities to recognize geometric shapes and their spatial relationships, which we term geometric perception, are not explicitly and systematically explored. To address this gap, we introduce GePBench, a novel benchmark specifically designed to assess the geometric perception capabilities of MLLMs. Our extensive evaluations reveal that even the current state-of-the-art MLLMs exhibit significant deficiencies in geometric perception tasks. Furthermore, we show that models trained with GePBench data demonstrate considerable improvements on a wide range of downstream tasks, highlighting the critical role of geometric perception in enabling advanced multimodal applications. Our code and datasets are available at \href{https://github.com/Changhao-Xiang/GePBench}{https://github.com/Changhao-Xiang/GePBench}.

Read & Discuss → View Source →
18.
arXiv (CS.CV) 2026-06-16

Text-Vision Co-Instructed Image Editing

Authors:
Chenxi Xie↗Yuhui Wu↗Qiaosi Yi↗Lei Zhang↗

Existing image editing methods can be generally categorized into textual instruction-based and visual prompt-based ones. Textual instructions are semantically expressive, but are limited by the coarse granularity of spatial control of the editing results. In contrast, visual prompts such as drag and point can provide precise spatial guidance, but are limited by the inherent ambiguity in semantic intent. To unify the strength of textual and visual prompts, we present Text-Vision Co-Instructed Image Editing, which jointly models textual instructions as semantic intent and sparse visual instructions as spatial guidance, aiming to achieve precise and intent-faithful image manipulation. To this end, we first construct a textual-visual instruction paired dataset with more than 23K samples derived from dynamic videos, enabling aligned supervision for cross-modal instruction. We then propose TV-Edit, a Textual-Visual instruction unified Editing framework to contextualize drag or point-based visual instructions with image-text semantics and lift them into semantic-aware control representations for pretrained editing backbones. By integrating semantic intent and spatial constraints, TV-Edit leads to more precise spatial control, less instruction ambiguity, and stronger structural consistency than text-only or drag-based alternatives. Finally, we establish TV-Edit-Bench, a deliberately designed benchmark to evaluate semantic faithfulness, spatial alignment, and visual consistency with ground-truth references and controlled textual-visual variations for reliable assessment. Our experiments across multiple editing backbones demonstrate that TV-Edit consistently yields more precise and intent-faithful edits, significantly outperforming state-of-the-art instruction-based and drag-based baselines.

Read & Discuss → View Source →
19.
arXiv (CS.CV) 2026-06-12

Radar-Guided Polynomial Fitting for Metric Depth Estimation

Authors:
Patrick Rim↗Hyoungseob Park↗Vadim Ezhov↗Jeffrey Moon↗Alex Wong↗

We propose POLAR, a novel radar-guided depth estimation method that introduces polynomial fitting to efficiently transform scaleless depth predictions from pretrained monocular depth estimation (MDE) models into metric depth maps. Unlike existing approaches that rely on complex architectures or expensive sensors, our method is grounded in a fundamental insight: although MDE models often infer reasonable local depth structure within each object or local region, they may misalign these regions relative to one another, making a linear scale and shift (affine) transformation insufficient given three or more of these regions. To address this limitation, we use polynomial coefficients predicted from cheap, ubiquitous radar data to adaptively adjust predictions non-uniformly across depth ranges. In this way, POLAR generalizes beyond affine transformations and is able to correct such misalignments by introducing inflection points. Importantly, our polynomial fitting framework preserves structural consistency through a novel training objective that enforces local monotonicity via first-derivative regularization. POLAR achieves state-of-the-art performance across three datasets, outperforming existing methods by an average of 24.9% in MAE and 33.2% in RMSE, while also achieving state-of-the-art efficiency in terms of latency and computational cost.

Read & Discuss → View Source →
20.
arXiv (CS.LG) 2026-06-19

Weibull Weight-Scale Parameter Evolution under AdamW Training Dynamics

Authors:
Tiexin Ding↗

arXiv:2606.19367v1 Announce Type: new Abstract: Building on a two-parameter Weibull framework for diagnosing transformer weight distributions, we study why the Weibull weight-scale parameter $\lambda$ grows, overshoots, and then relaxes during AdamW training. We derive a leading-order three-force decomposition of the squared weight norm from the AdamW update: an alignment force measuring the correlation between weights and the adaptive update direction, an injection force from adaptive step magnitude, and a decay force from decoupled weight decay. On self-trained Pythia-70M models with ground-truth optimizer moments, alignment dominates the rise phase, contributing 88-94% of the absolute force budget across four random seeds and remaining robust to super-weight removal. Near saturation, alignment and decay approach balance, explaining the transition from weight-scale growth to relaxation. These force dynamics directly govern the squared-norm component underlying $\lambda(t)$; the remaining RMS-to-Weibull reconstruction offset is measurable and decomposes into bridge and integration components, totaling approximately 5-6% in densely sampled regions. To extend the analysis to real models where optimizer moments are unavailable, we introduce a spline displacement method that recovers the alignment force from sparse checkpoints with approximately 92-94% accuracy, about twice the naive two-point baseline. We further observe that the peak value of $\lambda(t)$ varies with training-data coherence in our experiments, suggesting a data-dependent component of weight-scale growth that we leave to a controlled follow-up study. Code and data are available at https://github.com/tiexinding/NPM-Weibull-public.

Read & Discuss → View Source →
21.
arXiv (CS.CV) 2026-06-12

IterCAD: An Iterative Multimodal Agent for Visually-Grounded CAD Generation and Editing

Authors:
Tao Hu↗Jiaxin Ai↗Licheng Wen↗Xueheng Li↗Shu Zou↗Siqi Li↗Nianchen Deng↗Xinyu Cai↗Hongbin Zhou↗Pinlong Cai↗Daocheng Fu↗Yu Yang↗…

Computer-Aided Design is pivotal in modern manufacturing, yet existing automated methods predominantly rely on open-loop, one-shot generation, creating a mismatch with iterative real-world practices. In this paper, we present IterCAD, a unified multimodal agent framework for closed-loop, interactive CAD generation and editing. We formulate the task as a multi-turn interaction between a multimodal agent and an executable CAD sandbox, covering three tasks: Drawing-to-Code, Text-to-Code, and Interactive Editing. To support this, we develop a data synthesis pipeline incorporating advanced industrial manufacturing features to generate standard-compliant multi-view engineering drawings, complex code-editing tasks, and high-fidelity interaction trajectories. We optimize the agent via progressive SFT followed by geometry-aware reinforcement learning with viable-prefix masking to enhance code executability and geometric fidelity. Finally, we introduce the IterCAD-Bench evaluation suite and propose the Chamfer Distance Tolerance-Recall (CD-TR) curve alongside its AUC-TR metric, establishing a survivor-bias-free standard that unifies code validity and geometric precision. Extensive experiments demonstrate that IterCAD achieves highly competitive performance across multiple benchmarks, significantly outperforming existing approaches in both code executability and geometric precision, while exhibiting superior capabilities in closed-loop iterative refinement.

Read & Discuss → View Source →
22.
arXiv (CS.AI) 2026-06-18

MIDS: Detecting Stealthy Masquerade and Tampering Attacks on CAN Bus via Bidirectional Mamba

Authors:
Qiqi Liu↗Runhan Song↗Lei Cui↗Heng Zhang↗Yuyan Sun↗Limin Sun↗

arXiv:2606.18599v1 Announce Type: cross Abstract: The Controller Area Network (CAN) protocol is the primary communication standard for Electronic Control Units (ECUs) in modern vehicles, but its lack of encryption and authentication exposes it to a range of security threats. Existing intrusion detection systems are largely tuned to fabrication-style attacks (DoS, fuzzing, ID spoofing realised by frame injection), in which detection signals such as per-ID inter-arrival statistics are readily available. We instead address the harder masquerade setting[b37], in which an internal adversary substitutes a legitimate frame in-situ at its original transmission slot, preserving traffic periodicity and rendering traffic-statistic defences ineffective. We propose the Mamba Intrusion Detection System (MIDS), an innovative dual-stream framework that processes CAN identifiers and payloads in parallel and reconstructs their joint temporal semantics through bidirectional selective state-space modelling. To evaluate MIDS, we collected over 100 million CAN frames from a physical Tesla Model 3 across three driving regimes and synthesised 54 masquerade attack variants spanning ID-only, data-only, and combined modifications. MIDS attains an F1 of 96.94\% on this dataset, exceeding the strongest reproducible baseline by more than 8 percentage points, while sustaining a 1.147~ms single-window inference latency – ample headroom for real-time onboard deployment. To verify generalisation, we further evaluate MIDS on four public benchmarks (ROAD, CrySyS, OTIDS, CT\&T) covering both masquerade and injection scenarios; MIDS attains F1 from 93.70\% to 99.61\%, outperforming the strongest of eight reproduced baselines by up to 13.94 percentage points under a unified 5-fold protocol.

Read & Discuss → View Source →
23.
arXiv (CS.CV) 2026-06-18

Global Offshore Wind Infrastructure: Deployment and Operational Dynamics from Dense Sentinel-1 Time Series

Authors:
Thorsten Hoeser↗Felix Bachofer↗Claudia Kuenzer↗

The offshore wind energy sector is expanding rapidly, increasing the need for independent, high-temporal-resolution monitoring of infrastructure deployment and operation at global scale. While Earth Observation based offshore wind infrastructure mapping has matured for spatial localization, existing open datasets lack temporally dense and semantically fine-grained information on construction and operational dynamics. We introduce a global Sentinel-1 synthetic aperture radar (SAR) time series data corpus that resolves deployment and operational phases of offshore wind infrastructure from 2016Q1 to 2025Q1. Building on an updated object detection workflow, we compile 15,606 time series at detected infrastructure locations, with overall 14,840,637 events as analysis-ready 1D SAR backscatter profiles, one profile per Sentinel-1 acquisition and location. To enable direct use and benchmarking, we release (i) the analysis ready 1D SAR profiles, (ii) event-level baseline semantic labels generated by a rule-based classifier, and (iii) an expert-annotated benchmark dataset of 553 time series with 328,657 event labels. The baseline classifier achieves a macro F1 score of 0.84 in event-wise evaluation and an area under the collapsed edit similarity-quality threshold curve (AUC) of 0.785, indicating temporal coherence. We demonstrate that the resulting corpus supports global-scale analyses of deployment dynamics, the identification of differences in regional deployment patterns, vessel interactions, and operational events, and provides a reference for developing and comparing time series classification methods for offshore wind infrastructure monitoring.

Read & Discuss → View Source →
24.
arXiv (CS.AI) 2026-06-15

When Good Verifiers Go Bad: Self-Improving VLMs Can Regress on New Tasks

Authors:
Jianzhe Lin↗

arXiv:2606.14629v1 Announce Type: cross Abstract: Verifier-driven self-DPO is a common recipe for self-improving production visual-language models. In this setup, a frozen verifier scores candidate generations, the top- and bottom-scoring candidates form a preference example, and DPO updates the learner. The deployment-time assumption is monotone: a stronger verifier should yield a stronger student. We show that this assumption can fail because verifier quality is highly task-specific. On a four-rung open-source verifier ladder across MathVista, MMMU, and BLINK, the same verifiers that are above-threshold and improve a Qwen-3-VL-2B student on MathVista become sub-threshold on MMMU, where their task-rubric accuracy drops to 8% to 23%. In this regime, every verifier we tested silently regresses the student, producing drops of 3.4 to 10.9 percentage points below the frozen baseline while the DPO training loss continues to decrease. The regression replicates on a second student, Qwen-2.5-VL-3B. Moreover, within the failure regime, damage is confidence-inverted: the more accurate-but-still-wrong verifier causes larger regression than a near-random verifier, suggesting that progress-gated replay amplifies confidently wrong preference pairs. We give a compact mechanistic explanation via a variance theorem for progress-gated replay and its direction-mismatch failure mode. The deployment message is operational rather than purely diagnostic: before running any verifier-driven loop, teams should measure target-task rubric accuracy, rank verifiers by target-task rubric quality rather than parameter count, and treat diminishing returns in above-threshold regimes as a verifier-side compute budget cap.

Read & Discuss → View Source →
25.
arXiv (math.PR) 2026-06-11

Percolation on hierarchical lattices

Authors:
Caio Alves↗Rangel Baldasso↗Carlos Gustavo Moreira↗Augusto Teixeira↗

arXiv:2606.11503v1 Announce Type: new Abstract: We consider independent Bernoulli percolation on top of sequences of hierarchical graphs. Given a graph $G_{1}$ with two distinguished vertices $a_{1}$ and $b_{1}$, the hierarchical graph with seed $G_{1}$ is the sequence $\big( G_{k} \big)_{k \geq 1}$ resulting from the inductive procedure, where the graph $G_{k+1}$ is obtained from $G_{k}$ by replacing each of its edges with a copy of $G_{1}$, attached by the vertices $a_{1}$ and $b_{1}$. We prove that, under sharp hypotheses, percolation on these graphs presents a unique phase transition. Second, we establish the existence of several critical exponents in this context, such as the critical exponents for the correlation length $\nu$, the surface tension $\mu$, the one-arm exponent $\alpha_{1}$. Several results are also obtained for their infinite counterpart $G_\infty$, which is the Benjamini-Schramm limit of $G_k$: uniqueness of the infinite cluster, continuity of $\theta(p)$, existence of the percolation-probability exponent $\beta$ and scaling relations for the critical exponents $\alpha_1$, $\nu$ and $\beta$. Furthermore, we analyze noise sensitivity for crossing functions in $G_{k}$ and establish sharp noise sensitivity in this setting. Finally, we propose a setup where it is possible to verify the locality hypothesis, stating that the critical threshold for percolation is a local property, while critical exponents are determined by the global geometry of the graph. As a consequence of the techniques developed here, we also provide a necessary and sufficient condition for the existence of a unique fixed point for the map $p \mapsto \mathbb{E}_p[g]$ in $(0,1)$, where $g:\{0,1\}^n \to \{0,1\}$ is a nontrivial monotone Boolean function.

Read & Discuss → View Source →