Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.LG) 2026-06-24

One Ruler: A Same-Hands Re-Evaluation of Bivariate Causal Direction on Tuebingen, with a Parameter-Free Compression Baseline

arXiv:2606.23767v1 Announce Type: new Abstract: Headline accuracies on the Tuebingen cause-effect pairs are routinely compared across papers even though each is measured under its authors' own protocol – different pair subsets, weightings, model-selection, and decision rates. We argue this is the wrong comparison and run the right one: a same-hands re-evaluation in which every method is run by us on the identical 102 pairs, with one strict rule – no tuning and a decision forced on every pair. As a clean reference point we introduce a deliberately minimal baseline: sorted-conditional compression, which feeds quantized, sorted, first-differenced data to an off-the-shelf compressor (bz2) and has zero fitted parameters. Under the common ruler the ranking differs sharply from the literature. Our baseline reaches 74.7% weighted accuracy (p = 3.7e-7); on the same 100 pairs that SLOPE is evaluated on it scores 76.0%, a 1.2-point gap below the authors' own forced-decision SLOPE (77.2%) that is well inside noise (McNemar p = 0.39). A faithful re-run of RECI lands at 70.7% – inside the original authors' reported error bar, not the 77.5% often quoted (which we trace to a mis-copied cell). SLOPE's published 82.4% is a decided-subset figure: scoring the authors' own stored output only on the pairs its significance test chose to answer reproduces 81.7%. Under the common ruler the methods cluster in the low-to-mid 70s and the zero-parameter compressor ties the strongest of them. We document the mechanisms that inflate published figures (test-set model selection, significance-gated abstention) and contribute two further results: compression score magnitude is a model-free confounding flag (p = 2.8e-68), and a pre-registered falsification test fails in an instructive way that bounds the method's theoretical interpretation. Code, pre-registrations, and per-pair outputs are released.

02.
arXiv (CS.CL) 2026-06-12

BOUTEF: A Multilingual Corpus for FakeNews in North Africa – Language as a Weapon

The rapid spread of fake news on social media has become a major challenge, particularly in multilingual and under-resourced contexts such as North Africa. In this paper, we introduce BOUTEF, a large-scale multilingual corpus designed to study the propagation, characteristics, and impact of fake news in Algeria and Tunisia. The corpus integrates three complementary components: fake narratives, genuine narratives, and associated user-generated comments, along with verified debunking information. It covers a wide range of languages and linguistic varieties, including MSA, Algerian and Tunisian dialects, Arabizi, French, English, and code-switched language. Building on this resource, we conduct a comprehensive empirical analysis combining quantitative and qualitative approaches. We examine thematic distributions, linguistic and rhetorical strategies, sentiment patterns, and social engagement dynamics. Statistical analyses reveal significant associations between thematic categories and message veracity, as well as strong correlations between user engagement and the visibility of fake content. Our findings show that fake news relies heavily on emotionally charged narratives, sensational framing, and hybrid linguistic practices that enhance virality and audience engagement. In contrast, debunking content adopts a more factual and verification-oriented style. Furthermore, a comparative analysis between Algeria and Tunisia highlights both shared dynamics and country-specific characteristics shaped by sociopolitical contexts. The results emphasize the role of informal language practices in the diffusion and reception of misinformation. By providing a rich, annotated, and publicly available dataset, this work contributes to advancing research on fake news detection, low-resource language processing, and the understanding of information disorders in complex linguistic environments.

03.
arXiv (CS.CV) 2026-06-15

HULFSynth : An INR based Super-Resolution and Ultra Low-Field MRI Synthesis via Contrast factor estimation

We present an unsupervised single image bidirectional Magnetic Resonance Image (MRI) synthesizer that synthesizes an Ultra-Low Field (ULF) like image from a High-Field (HF) magnitude image and vice-versa. Unlike existing MRI synthesis models, our approach is inspired by the physics that drives contrast changes between HF and ULF MRIs. Our forward model simulates a HF to ULF transformation by estimating the tissue-type Signal-to-Noise ratio (SNR) values based on target contrast values. For the Super-Resolution task, we used an Implicit Neural Representation (INR) network to synthesize HF image by simultaneously predicting tissue-type segmentations and image intensity without observed HF data. The proposed method is evaluated using synthetic ULF-like data from generated from standard 3T T$_1$-weighted images for qualitative assessments and paired 3T-64mT T$_1$-weighted images for validation experiments. WM-GM contrast improved by 52% in synthetic ULF-like images and 37% in 64mT images. Sensitivity experiments demonstrated the robustness of our forward model to variations in target contrast, noise and initial seeding.

04.
arXiv (CS.AI) 2026-06-17

LLM-as-Judge in Education: A Curriculum-Grounded Marking Pipeline

arXiv:2606.17507v1 Announce Type: new Abstract: Generative AI and large language models (LLMs) are increasingly applied to question generation and automated assessment. However, deploying LLMs in preparation for high-stakes exams requires more than prompt engineering; it demands software pipelines that systematically ground model outputs in authorised curriculum artefacts and marking guidelines issued by education authorities. This paper presents a curriculum-grounded, configurable LLM-as-Judge pipeline for question-level marking, co-developed with an industrial partner, to support exam preparation for university admission. The pipeline identifies the relevant topics, subtopics, and cognitive demand of a question, and assembles verifiable and authorised context to support LLM judgement. Curriculum intent is operationalised through concrete syllabus artefacts, including prescribed verbs and outcomes, performance band descriptors, glossary definitions, and marking-guideline principles. A staged LLM workflow is employed to first generate question-specific rubrics, capturing structured expectations of performance, and then derive and evaluate marking criteria used to allocate marks to student responses. This design improves consistency, transparency, and alignment with official marking practices. Preliminary evaluation shows that the proposed LLM-as-Judge pipeline delivers marking outcomes comparable to human tutors, while yielding justifications that are more traceable to authorised curriculum artefacts and marking standards. The pipeline has also been integrated into an online study platform, where early deployment data provide initial insights into operational usage and manual overrides.

05.
medRxiv (Medicine) 2026-06-18

Biomedical Capacity, Governance, and Health Security: A Dominican Republic Research Analysis of Stakeholder Perspectives

The COVID-19 pandemic exposed critical vulnerabilities in globally concentrated biomedical supply chains and accelerated interest in nearshoring and hemispheric health-security strategies. The Dominican Republic, already the third-largest medical device exporter in Latin America, occupies a strategically significant but institutionally constrained position within this realignment. This study evaluates stakeholder perceptions of the principal opportunities and barriers affecting biomedical ecosystem development in the Dominican Republic, with particular attention to governance, workforce capacity, and value-chain upgrading pathways. Methods. A concurrent mixed-methods design was employed, integrating a cross-sectional electronic survey of 142 purposively sampled domain experts (administered September-December 2025) with a qualitative executive consultation with senior government and industry leaders. Survey analyses combined descriptive statistics, one-sample t-tests against the scale neutral midpoint, chi-square goodness-of-fit tests, Friedman non-parametric ranking, Spearman rank correlations, and exploratory linear and logistic multivariable regression. Qualitative responses were analyzed using a framework approach grounded in the Triple Helix model of innovation systems. Results. Perceived government support was significantly below neutral (mean = 2.67, SD = 1.12; p = 0.034). Workforce shortages (83.3%) and weak academia-industry collaboration (71.4%) were the most frequently endorsed barriers ({chi}2(5) = 18.7, p = 0.002). Regulatory modernization (88.1%) and workforce development (85.7%) ranked as the highest-priority policy levers (Friedman p = 0.005). Clinical trials and contract research organization services were the dominant sub-sector priority (76.2%, binomial p < 0.001). In multivariable analysis, perceived government support, talent availability, and confidence in IP protection jointly explained 46% of the variance in sector competitiveness (R2 = 0.46, p < 0.001). Strong majority support existed for a formal public-private biomedical coordination authority (73.8%, p < 0.001).Conclusion. Institutional credibility and advanced human capital–rather than geography or market access–are the perceived binding constraints on the Dominican Republics biomedical trajectory. Regulatory modernization, targeted workforce investment, and the establishment of a national biomedical coordination authority represent the highest-leverage interventions for positioning the country as a hemispheric hub for biomedical manufacturing, clinical research, and health security.

06.
arXiv (CS.CV) 2026-06-16

Federated Medical Image Segmentation under Real-World Label Noise: A Benchmark Suite for Noisy Label Learning Method Selection

While federated learning (FL) enables collaborative medical image segmentation without centralizing sensitive data, real-world deployment is frequently complicated by cross-site label imperfections such as contour disagreement, missing or additional structures, and confused labels. Federated noisy label learning (FNLL) aims to mitigate these effects, yet remains underused in practice as existing evidence is largely based on synthetic noise, simplified settings, and limited real-world noisy evaluation. We address this gap by introducing a benchmark suite that combines diverse real-world noisy datasets, deployment-relevant client-noise scenarios, and label-noise-targeted evaluation to support systematic FNLL assessment and informed method selection. The suite combines curated real-world noisy medical image segmentation datasets from diverse sources with a comprehensive federated segmentation framework including various client-noise scenarios and noise-targeted evaluation. The presented suite provides a realistic and discriminative basis for FNLL evaluation in medical image segmentation and establishes a reusable foundation for fair benchmarking, dataset-specific label-noise characterization, and future method development under realistic federated settings. Code is available at https://github.com/MIC-DKFZ/FedSegNoiseBench.

07.
arXiv (CS.CV) 2026-06-24

MM-TRELLIS: Point-Cloud Guided Multi-Modal 3D Vehicle Generation in Autonomous Driving

Recovering realistic 3D vehicle models from autonomous driving scenes is crucial for synthesizing training data and building simulation environment. However, most existing vehicle generation methods fail to fully exploit multimodal sensors i.e. multi-view images and LiDAR point clouds) and rely on neural rendering based reconstruction, leading to low-quality mesh. Recently, native 3D generative models have made significant progress, yet they are not built for arbitrary multi-view inputs and often struggle with in-the-wild driving images. In this work, we present MM-TRELLIS, a multi-modal version of TRELLIS for in-the-wild 3D vehicle generation that integrates LiDAR and image sensors from autonomous driving datasets into native 3D generative models. Specifically, multi-view images are cycled as conditioning inputs, while LiDAR point clouds provide test-time guidance to ensure geometric accuracy and cross-view consistency. During denoising, we first align the guidance point cloud with the model priors, then enforce consistency between the generated geometry and the guidance point cloud. Finally, we introduce a voxel filtering strategy based on the opacity of 3D Gaussian Splatting to suppress floaters and produce clean meshes. Comprehensive experiments on Waymo dataset demonstrate our method outperforms existing methods in high-fidelity 3D vehicle generation. Code is available at https://github.com/HongliXiao/MM-TRELLIS.

08.
arXiv (CS.CV) 2026-06-24

Sat2City v2: Native 3D City Asset Generation from a Single Satellite Image

Generating explicit 3D city assets from a single satellite image is important for digital twins, urban simulation, and geospatial intelligence. Unlike satellite-to-street-view synthesis, the task requires a reusable textured mesh with plausible geometry and controllable appearance rather than a 3D proxy optimized only for rendering a small set of images or videos. The ICCV Sat2City framework made a first step by conditioning cascaded sparse-voxel latent diffusion on satellite-derived height maps, but its appearance was random, its training data were synthetic, and its task-specific VAE did not scale well to noisy real-world reconstructions. We present Sat2City v2, a journal extension that adapts a pretrained native structured-latent 3D foundation model to weakly aligned satellite images and textured meshes. We build a real-world dataset with 16,241 satellite-mesh pairs across 24 regions in 9 cities. Instead of learning a 3D representation from noisy city meshes, Sat2City v2 encodes each mesh into a pretrained native 3D latent space, fine-tunes a satellite-conditioned geometry flow, and uses the decoded shape to anchor satellite-conditioned texturing. This retains Sat2City's geometry-to-appearance cascade while enabling appearance-controllable generation from the satellite input. Experiments on metric-scale DSM reconstruction and generative city-asset benchmarks for geometry and appearance show that Sat2City v2 achieves the best overall performance among evaluated baselines. Overall, Sat2City v2 advances satellite-to-city generation from rendering-oriented 3D proxies to explicit textured mesh assets, supported by, to the best of our knowledge, the first documented satellite-mesh paired dataset collected from matched geographic crops for this asset-level task. Project page: https://ai4city-hkust.github.io/Sat2City-v2/

09.
medRxiv (Medicine) 2026-06-24

Predicting 24-Month MCI-to-Alzheimer's Conversion Using Routine Clinical Assessments Without Neuroimaging or Genetic Testing

Authors:

ABSTRACT INTRODUCTION: Early identification of individuals with mild cognitive impairment (MCI) at high risk of conversion to Alzheimer's disease (AD) is essential for timely intervention. We evaluated whether routinely obtainable clinical assessments can accurately predict 24-month MC to AD conversion. METHODS: Data from 2,430 participants with MCI in the Alzheimer's Disease Neuroimaging Initiative were analyzed. XGBoost, Random Forest, and Logistic Regression models were evaluated. SHAP-based feature selection and feature ablation analyses assessed the incremental value of APOE4 genotype. RESULTS: A six-feature model incorporating age, sex, education, RAVLT Immediate Recall, MMSE, and EcogSPTotal achieved an AUC of 0.922 (95% CI, 0.911~0.933). APOE4 provided negligible additional predictive value once cognitive measures were included. The XGBoost model outperformed Clinical Dementia Rating Sum of Boxes classification. DISCUSSION: Routine cognitive assessments accurately predict 24-month MCI-to-AD progression without biomarkers, neuroimaging, or genetic testing, offering a practical, low-cost tool for clinical risk stratification.

10.
arXiv (CS.LG) 2026-06-17

Half a Link can Be Enough to Predict a Whole Link: Understanding Generalization in Knowledge Graph Foundation Models

arXiv:2606.18001v1 Announce Type: new Abstract: Knowledge graph (KG) foundation models (KGFMs) are zero-shot generalizers: trained once, they can predict links on unseen graphs without retraining. However, understanding when and how they can robustly generalize across KGs is still an open question. In this paper, we shed some light on their generalization mechanisms highlighting how their performance on unseen KGs is not uniform when it comes to partially seen links, which we call half-links. In fact, we show that to predict a test triple $(h,r,t)$ it might suffice in practice to have observed the half-link $(h,r)$ or $(r,t)$ in the inference graph. This yields a taxonomy of four scenarios when combinations of these half-links are observed or not. In a rigorous stratified analysis over these scenarios, we reveal that SoTA KGFMs use seen half links for predictions, while unseen half-links pose different challenges. As such, our finer-grained taxonomy can be a diagnostic protocol for robust KGFM generalization and highlights where novel KGFMs can improve.

11.
arXiv (quant-ph) 2026-06-11

Linear Combination of Hamiltonian Simulation with Commutator Scaling

arXiv:2606.11475v1 Announce Type: new Abstract: The Linear Combination of Hamiltonian Simulation (LCHS) framework simulates dissipative linear dynamics by representing time evolution as an integral over unitary operators, which is discretized by quadrature and implemented via Hamiltonian simulation. While existing analyses achieve near-optimal scaling in time and precision using norm-based quantities of the dissipative generator, we show that implementing the Hamiltonian simulation steps with Multi-Product Formulas (MPFs) yields commutator-sensitive error and complexity bounds. We demonstrate that the quadrature rule affects not only discretization error but also commutator structure and query complexity. This dependence is quantified through post-quadrature analysis for abstract MPF error profiles and for general time-independent and local Hamiltonians using known commutator-sensitive MPF error estimates. We compare uniform trapezoidal and free-scale sinh–sinh quadrature, showing improved quadrature-cardinality scaling for the latter, and illustrate the framework with applications to fractional diffusion, advection–diffusion, and open quantum systems.

12.
arXiv (CS.CV) 2026-06-15

Rendering-Aware Sparse Sampling for BRDF Acquisition

Accurate BRDF acquisition is essential for realistic rendering, but dense gonioreflectometer measurements are slow and expensive. We study how to select a small set of BRDF measurements that is most informative for reconstructing material appearance under a learned BRDF prior. Existing sparse-acquisition methods often optimize samples for BRDF-space reconstruction for all materials, while the perceptual importance of a adaptive measurement ultimately depends on its effect on each rendered appearance. We therefore formulate sparse adaptive acquisition as a rendering-aware optimization problem. Our method combines a set encoder for sparse coordinate–value observations, a pretrained hypernetwork-based/PCA-based BRDF reconstructor, and a differentiable renderer. During sampler training, the reconstructor remains fixed, and gradients from a rendered-image loss optimize the measurement locations. This separates acquisition design from prior fitting and encourages the sampler to choose directions that are informative under the learned material distribution. To make the comparison controlled, we evaluate the uniform baseline, meta-learning method, HyperBRDF method, and our learned sampler under matched sample numbers, train/test split, rendering scene, object mask, image mapping, and metrics. Our central claim: rendering-aware sampling improves extremely sparse BRDF acquisition when final rendered appearance is the target. BRDF-space and combined losses are reported only as ablations, together with joint refinement and image-only latent fitting for unseen materials.

13.
arXiv (CS.AI) 2026-06-15

Securing the Future of IoMT in the Post-Quantum Era: An Edge-Native Federated Learning Approach

arXiv:2606.14515v1 Announce Type: cross Abstract: Internet of Medical Things (IoMT) devices operate under strict resource constraints while handling highly sensitive health data, making security and privacy critical concerns. Federated learning (FL) further complicates this landscape, as model updates exchanged during training may unintentionally expose private medical information. Emerging quantum computing capabilities threaten the long-term viability of conventional lightweight cryptographic mechanisms, motivating the integration of Post-Quantum Cryptography (PQC) into IoMT systems. This article discusses key enabling technologies for quantum-resilient IoMT, including post-quantum key establishment, lightweight encryption, and edge-native orchestration. We propose a scalable Kubernetes-based framework that integrates PQC into FL-enabled IoMT environments and validate it on a Raspberry Pi testbed. Results demonstrate that distributed cryptographic processing significantly reduces latency compared to sequential designs while maintaining feasible resource overhead. The primary contribution of this work lies in the design and validation of a secure orchestration and communication framework for FL-enabled IoMT systems. We conclude by outlining future directions toward energy-aware architectures, intelligent security optimization, and resilient next-generation Intelligent Internet of Medical Things (IIoMT) ecosystems.

14.
bioRxiv (Bioinfo) 2026-06-12

A Graph-based QSAR Modeling Pipeline for Predicting In vitro PubChem Assays and In vivo Human Hepatotoxicity: Mechanistic Analysis of Caspase-3/7 Activation

Background: Caspase-3 and -7 are key effector caspases in the apoptotic pathway, a form of programmed cell death, and their activities serve as a well-established biomarker for evaluating environmental chemical toxicity and informing chemical risk assessment. Loss of mitochondrial membrane potential is a key event in the activation of Caspase-3/7 signaling and the subsequent induction of apoptosis. Therefore, simultaneous assessment of mitochondrial membrane potential and Caspase-3/7 activity enables elucidation of the mechanisms and pathways through which apoptosis is initiated. Rapid and accurate assessment of the potential toxicity of environmental chemicals and drugs remains a major challenge. Quantitative Structure Activity Relationship (QSAR) modeling have been widely used for toxicity prediction. Graph-based approaches encode compounds directly as molecular graphs, allowing structure-activity relationships to be learnt from molecular topology without the information loss in binary fingerprints. While advanced graph models such as graph transformers (GTs) have shown outstanding performance in many domains, they have not been fully leveraged in QSAR modeling on Caspase and mitochondrial toxicity. Methods: We propose a QSAR modeling pipeline that encompasses assay data preprocessing, feature representations (fingerprints and molecular graphs), and benchmarking machine learning (ML) models, including classic ML models, graph neural networks (GNNs), GTs, and their consensus ensembles. Based on in vitro Caspase and mitochondrial assays in PubChem, we applied the pipeline to predict Caspase-3/7 activation and mitochondrial membrane potential (MMP). Beyond in vitro assays, we also built in vivo QSAR modeling for FDA Drug-Induced Liver Injury (DILI) gold standard on human hepatotoxicity. Moreover, mechanistic analysis on Caspase-3/7 activation was conducted by comparing with MMP disruption to identify chemical substructures that may be responsible for dual activations. We also investigated cell-line-specific responses by identifying structural motifs that selectively induce Caspase-3/7 activation in individual cell lines.Results:Experimental evaluations show that GTs and GNNs outperformed classic ML models when the number of active compounds is large, such as MMP disruption, while classic ML models and GTs performed good for highly imbalance data with limited active compounds, such as Caspase-3/7 activation. For DILI prediction, the full consensus model achieved the highest AUC 0.69 and Graphormer had the highest F1 score 0.79, both surpassing the previous best model with AUC 0.63 and F1 0.65 with a large margin.Our mechanistic analysis shows that phenolic compounds bearing a para-hydroxyphenyl motif, as well as members of the lipophilic chain family with long alkyl chains can trigger the collapse of MMP, leading to the activation of caspases-3 and -7. Human embryonic kidney (HEK293) was the only cell line with a distinct structural motif: 1,1-dichloroethane and chlorobenzene. Human neuroblastoma (SK-N-SH) is uniquely impacted by an epoxide fragment and rat hepatoma (H-4-II-E) is uniquely impacted by a tetramethylcyclohexene motif and an acetaldehyde fragment.Conclusions:The proposed pipeline for QSAR modeling, including data preprocessing, feature representations, and incorporation of advanced graph ML approaches, is highly effective in predicting not only on Caspase-3/7 activation and membrane potential collapse, but also on FDA DILI human hetatotoxicity. As future research directions, we will leverage extra information, e.g., biological activity and findings in existing toxicity literature, and recent advances in large language models and agentic AI to further improve the predictive performance and enable a sensitive and specific framework for assessing human hepatotoxicity of environmental compounds.

15.
arXiv (CS.AI) 2026-06-16

LLM4RTL: Tool-Assisted LLM for RTL Generation

arXiv:2606.15500v1 Announce Type: cross Abstract: Large language models (LLMs) have facilitated impressive progress in software engineering, code generation, tooling, and systems. Concurrently, a significant body of research has developed which explores a growing variety of methods and systems for applying LLMs to hardware and chip design (e.g., systems for RTL code generation based on functional description). However, when it comes to open Verilog/RTL code-generation, we need high-quality training samples to build specialized and more effective LLM systems through fine-tuning or low-rank adaptation. Here, we propose a ``judge-renew-check-renew-check'' (JRCRC) pipeline which updates a current public dataset using a hierarchy of state-of-the-art commercial LLM models differing in their costs and capabilities in RTL code generation. This approach achieves a cost-effective mechanism for filtering and refining code-generation samples into a higher-quality training dataset. Our experiments also identify some common weaknesses of LLMs in rule-based reasoning and logic, and consequently, in RTL code-generation. Having identified these weaknesses, we develop an architecture for incorporating pre-processing tools to dynamically assist the LLMs in inferring logical relationships from tabular data formats. With our tools-assisted architecture for RTL code generation, we achieve significant overall performance gains in the VerilogEval benchmark and outperform many state-of-the-art methods. Our LLM4RTL system achieves performance comparable to that of GPT-4O using a significantly much smaller LLM.

16.
arXiv (CS.AI) 2026-06-24

Random Rule Forest (RRF): Interpretable and Manageable Ensembles of LLM-Generated Questions for Predicting Success from Unstructured Data

arXiv:2505.24622v3 Announce Type: replace Abstract: Many high-stakes screening tasks require predicting rare outcomes from unstructured text, where errors are costly and decisions must be auditable. We introduce Random Rule Forest (RRF), an interpretable ensemble that uses a large language model (LLM) not as an end-to-end predictor but as a generator of simple YES/NO questions. Each question acts as a weak learner, and their responses are combined by a plain unit-weight vote into an auditable ``green-flags'' scorecard: enough independent positive signals indicate a higher chance of success. We argue this deliberate simplicity is a robust default when positives are scarce and learned weights are hard to estimate. We evaluate RRF in two low-base-rate domains. On early-stage startup screening from founder profiles, RRF produces a transparent scorecard whose precision is several times the base rate (with light expert input raising it further) and, unlike direct prompting, its operating point can be controlled directly. On an established Phase~I clinical-trial benchmark, RRF outperforms published baselines on the threshold-independent metrics PR-AUC and ROC-AUC. Together these show that LLMs can serve as auditable feature generators for high-stakes text-based decisions, combining transparency with competitive predictive performance.

18.
arXiv (CS.LG) 2026-06-16

M-CTX: Exact and Scalable Spatial Context Retrieval for Trajectory Analytics

arXiv:2606.15244v1 Announce Type: new Abstract: Modern trajectory predictors increasingly condition on external spatial context, such as map geometry, signed distance fields (SDFs), and nearby moving agents. While this context improves prediction quality, constructing it for every training anchor has become a hidden systems bottleneck. In a representative maritime AIS pipeline, spatial context construction requires roughly 17 CPU-days for a 5.48M-anchor corpus, dominating the cost of the downstream predictor. We present M-CTX, an exact and scalable spatial context-retrieval framework for trajectory analytics. M-CTX recasts context construction as an ingest-once, query-many spatial database workload and replaces three brute-force stages – OSM range retrieval, SDF computation, and moving-vessel neighbour lookup – with composable, index-backed operators. Its learned range-index backend, BR-LZ, provides recall-complete MBR-overlap range retrieval and reduces candidate amplification by 1.1x–2.7x relative to global-expansion one-curve baselines. Across four maritime regions, eight baseline systems, synthetic workloads with up to 40M spatial features, and 10^7-record AIS streams, M-CTX reproduces the reference context exactly. On the 5.48M-anchor corpus, it reduces context construction from about 17 CPU-days to 1.8 hours, a measured 226x end-to-end speed-up. An optional storage mode further compresses SDF context by 64x with only a 0.04 m ADE change. These results establish exact spatial context retrieval as a first-class database problem in modern trajectory analytics. Code and datasets are publicly available at https://github.com/mark000071/M-CTX-Traj.

19.
arXiv (CS.CL) 2026-06-16

MedSynth: Realistic, Synthetic Medical Dialogue-Note Pairs

Physicians spend significant time documenting clinical encounters, a burden that contributes to professional burnout. To address this, robust automation tools for medical documentation are crucial. We introduce MedSynth – a novel dataset of synthetic medical dialogues and notes designed to advance the Dialogue-to-Note (Dial-2-Note) and Note-to-Dialogue (Note-2-Dial) tasks. Informed by an extensive analysis of disease distributions, this dataset includes over 10,000 dialogue-note pairs covering over 2000 ICD-10 codes. We demonstrate that our dataset markedly enhances the performance of models in generating medical notes from dialogues, and dialogues from medical notes. The dataset provides a valuable resource in a field where open-access, privacy-compliant, and diverse training data are scarce. Code is available at https://github.com/ahmadrezarm/MedSynth/tree/main and the dataset is available at https://huggingface.co/datasets/Ahmad0067/MedSynth.

20.
arXiv (quant-ph) 2026-06-16

Non-perturbative CPMG scaling and qutrit-driven breakdown under compiled superconducting-qubit control: a single-qubit study

Authors:

arXiv:2603.29525v3 Announce Type: replace Abstract: Decoherence in superconducting qubits arises from both multilevel dynamics and structured environmental noise, yet perturbative models cannot capture all resulting signatures. Here, EmuPlat couples instruction-set-architecture-level waveform generation to the hierarchical equations of motion HEOM under $1/f$ non-Markovian pure dephasing. In the resulting non-perturbative regime – where filter-function predictions become quantitatively uninformative – CPMG scaling of a three-level superconducting transmon yields one calibration result, two physical findings, and one structural null. Y-CPMG exhibits axis-dependent scaling-law breakdown – non-monotonic decoherence, partial coherence revival, and pronounced X–Y population asymmetry ($0.204$ vs ${

21.
arXiv (CS.CV) 2026-06-24

Understanding Deep Representation Learning via Layerwise Feature Compression and Discrimination

Over the past decade, deep learning has proven to be a highly effective tool for learning meaningful features from raw data. However, it remains an open question how deep networks perform hierarchical feature learning across layers. In this work, we attempt to unveil this mystery by investigating the structures of intermediate features. Motivated by our empirical findings that linear layers mimic the roles of deep layers in nonlinear networks for feature learning, we explore how deep linear networks transform input data into output by investigating the output (i.e., features) of each layer after training in the context of multi-class classification problems. Toward this goal, we first define metrics to measure within-class compression and between-class discrimination of intermediate features, respectively. Through theoretical analysis of these two metrics, we show that the evolution of features follows a simple and quantitative pattern from shallow to deep layers when the input data is nearly orthogonal and the network weights are minimum-norm, balanced, and approximate low-rank: Each layer of the linear network progressively compresses within-class features at a geometric rate and discriminates between-class features at a linear rate with respect to the number of layers that data have passed through. To the best of our knowledge, this is the first quantitative characterization of feature evolution in hierarchical representations of deep linear networks. Empirically, our extensive experiments not only validate our theoretical results numerically but also reveal a similar pattern in deep nonlinear networks which aligns well with recent empirical studies. Moreover, we demonstrate the practical implications of our results in transfer learning. Our code is available at https://github.com/Heimine/PNC_DLN.

22.
arXiv (quant-ph) 2026-06-24

Offline Channel-Independent QAOA Angles for RIS Power Aggregation: Unit-Circle Phase Dictionaries and Infinite-Size Spin-Glass Limits

arXiv:2606.24540v1 Announce Type: new Abstract: Reconfigurable intelligent surfaces (RIS) maximize received power by setting per-element phases. Discrete-phase optimization is NP-hard in the worst case, while the quantum approximate optimization algorithm (QAOA) applied to RIS faces limited phase alphabets, either per-problem angle optimization or uncharacterized training cost exposed to barren plateaus, and no scalable performance benchmark. We introduce a $2^{M}$-phase $\theta$ dictionary for optimizing power $\|\mathbf{A} \, e^{j\theta}\|^{2}$ having $K \times N$ channel matrix $\mathbf{A}$ and QAOA angle offline optimization with instance and size-independent infinite-size limit of the mixed-$q$ Gaussian ensemble of Basso et al. Our design bounds the spin-Hamiltonian interaction order to at most quartic for any $M$, and the deployed order-2 reduction lies below the even-$q\!\ge\!4$ regime in which constant-level QAOA limitations are proved. We perform analytical, state-vector, matrix-product-state and Pauli-path-simulation numerical studies for $N=K \leq 100$ and QAOA depth $p=9$, verifying offline angle transfer to Rayleigh, Rician/line-of-sight, cascaded double-fading and spatially-correlated RIS channels at $N\!\in\!\{5,12\}$. We observe performance reaching a near-optimal multi-start single-flip local-search reference for $N\!\le\!16$ under order-2 modeling with $2^{5}{=}32$-phase dictionary while the order-4 model shows a performance ceiling below the classical reference. The approach suggests a route to near-optimal large-$N$ performance on future fault-tolerant (FTQ) quantum computers, which enable the higher-depth QAOA circuits.

23.
arXiv (CS.AI) 2026-06-15

Exact Linear Attention

Authors:

arXiv:2605.18848v4 Announce Type: replace-cross Abstract: This paper introduces Exact Linear Attention (ELA), a mechanism that achieves linear computational complexity for Transformer attention by exploiting the exact decomposition property of kernel functions, thereby eliminating approximation error. We identify and address two key limitations of prior linear attention – gradient explosion and token attention dilution – by imposing kernel constraints that ensure non-negativity, discriminability, and geometric interpretability. Several kernel functions are proposed, including the Hadamard Exp Kernel, Summation Squared Euclidean Distance Kernel, and Subtraction Squared Euclidean Distance Kernel, each tailored for specific attention behaviors. Beyond the core attention formulation, the paper presents three engineering innovations: (1) a Hyper-Link structure that replaces traditional residual connections to mitigate gradient degradation; (2) a Memory Lobe module based on bidirectional linear attention, which captures "transformation flow" across layers to implement qualitative memory and an implicit reinforcement learning paradigm; and (3) a routing-score-based bias mechanism for Mixture-of-Experts (MoE) to improve interpretability and semantic alignment. Experimental results demonstrate that ELA achieves up to 6x faster decoding speed and 75% reduction in KV cache memory usage compared to full attention, while maintaining comparable or superior training performance. The proposed memory module accelerates convergence and enhances generalization. Furthermore, we extend the linear attention principle to vision models, yielding YOLO-LAT, which attains up to 4.3x GPU inference speedup and 7.9x parameter reduction with competitive detection accuracy. These results underline the broad applicability of exact linear attention for scaling Transformer models to ultra-long sequences and efficient visual tasks.

24.
arXiv (CS.CV) 2026-06-17

AnnotateAnything: Automatic Annotation of 3D Assets for Robot Manipulation

Simulation enables scalable robot data collection, but raw 3D assets provide only geometry, lacking the semantic, interactive, and physical knowledge needed to specify where and how robots should act. In this work, we present AnnotateAnything, a general automatic annotation framework that converts passive 3D assets into manipulation-ready assets with structured, diverse, and executable manipulation labels. AnnotateAnything is built around two complementary pipelines. First, a unified visual-language annotation pipeline using vision-language reasoning to infer object semantics, interaction constraints, and 3D-grounded cues, providing human-prior guidance for identifying meaningful interaction regions. Second, a fully automatic and massively parallel physics annotation pipeline grounds these priors in each asset's geometry and physical constraints through candidate generation, geometry optimization and trajectory generation. This pipeline produces diverse and executable action annotations, including grasp poses, dexterous contacts, articulation waypoints, insertion directions, hanging affordances, and navigation targets. Using the generated annotations, we further build an asynchronous parallel simulation data-collection system across diverse objects, tasks, and robot embodiments. Experiments demonstrate that AnnotateAnything achieves superior annotation efficiency, data-collection efficiency, and task success rates over existing annotation and data-generation pipelines, while also supporting downstream tasks such as affordance detection, robotic VQA, and visual instruction finetuning. We provide project materials on the project page and plan to release the full code, annotations, and benchmark to facilitate future research. Videos, code, demo assets, and annotations are provided in supplementary materials Project page: https://tourmaline-caramel-169490.netlify.app.

25.
arXiv (quant-ph) 2026-06-17

Impact of Network Constraints on Fault-Tolerant Distributed Quantum Computing

arXiv:2606.17495v1 Announce Type: new Abstract: As we move towards scalable and modular quantum computing, quantum data centres become imperative. Existing analyses typically treat network constraints in isolation or through simplified models, leaving the interplay between error correction operations and communication resources underexplored. In this work, we present an end-to-end simulation framework that jointly models surface-code operations, internal QPU connectivity, and realistic network constraints including finite entanglement generation rates, limited communication qubits, and bandwidth contention, producing execution latency, from which logical error rate estimates are obtained. The framework is modular by design, allowing individual components such as routing heuristics, scheduling policies, and network topologies to be independently replaced. Numerical evaluation reveals distinct operating regimes in which the optimal resource allocation and code distance selection shift depending on the network characteristics. These results point to tradeoffs in the design of distributed quantum computing architectures that are not visible when computation and communication are modeled separately.