Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (quant-ph) 2026-06-12

Quantum-Driven Neuromorphic Computing for Million-Qubit-Scale Workloads

arXiv:2606.12968v1 Announce Type: new Abstract: We introduce Apollo, a 10000 node p-qubit neuromorphic processor fabricated in 16 nm mixed signal CMOS and operating fully at room temperature with a typical analog core power envelope of about 0.5 W. Its fundamental element, the p-qubit, is a bistable stochastic unit whose continuous time state fluctuations are driven by integrated quantum entropy units that inject true quantum derived randomness. This enables ultrafast stochastic transitions at low energy while preserving a classical state representation. Apollo combines these p-qubits with a high degree Hyperion 256 interconnect topology, allowing efficient embedding of dense Ising and QUBO problems with substantially reduced minor embedding overhead compared with sparse annealing platforms. We show that, through the Suzuki Trotter correspondence, the equilibrium statistics and annealing dynamics of the p-qubit network reproduce key properties of transverse field quantum annealing without cryogenic cooling, long lived coherence, or microwave control. Beyond device level validation, Apollo is evaluated on a three dimensional spin glass benchmark previously used to study quantum advantage in superconducting annealers. Across 300 disorder realizations, Apollo reaches substantially lower ground state energies than reported cryogenic quantum annealing hardware, while remaining distinct from classical simulated annealing and simulated quantum annealing. A 350 nm release candidate device experimentally validates the core p-qubit dynamics, thermodynamic sampling correctness, and continuous time annealing behavior. These results establish Apollo as a room temperature, industrially scalable platform for quantum driven energy based optimization, probabilistic inference, generative modeling, and hybrid classical quantum workflows.

02.
arXiv (CS.LG) 2026-06-17

Recursive Scaling in Masked Diffusion Models

arXiv:2606.18022v1 Announce Type: new Abstract: Masked diffusion models (MDMs) have recently emerged as a promising paradigm for sequence generation. Scaling MDMs is conventionally achieved by increasing the parameter count or the number of denoising steps. We introduce Recursive Masked Diffusion Models (R-MDMs), which add recursive depth as a third scaling axis by repeatedly applying the same denoising transformer within each diffusion step. Recursion enables iterative refinement of the output through parameter reuse, increasing effective model depth without increasing parameter count. Across structured generation tasks, including Sudoku and Countdown, we show that R-MDMs achieve substantially improved parameter efficiency: a model with $L$ recursive iterations often matches the performance of non-recursive baselines with roughly $L\times$ more parameters. Moreover, recursive refinement can partially substitute for additional denoising steps, allowing recursive models to reach the same generation quality with fewer forward passes at inference time. These results suggest that recursive depth is a practically useful scaling mechanism for MDMs, improving both parameter efficiency and the allocation of test-time compute.

03.
arXiv (CS.LG) 2026-06-17

Conditional Local Importance by Quantile Expectations

arXiv:2411.08821v4 Announce Type: replace-cross Abstract: Global variable importance measures are commonly used to interpret the results of machine learning models. Local variable importance techniques assess how variables contribute to individual observations. Current, popular methods, including LIME and SHAP, provide useful measures of feature contribution in the prediction space, while leaving opportunities for improved characterization of local structure in the model loss space. Additionally, they are not natively adapted for multi-class classification problems. We propose a new model-agnostic method for calculating local variable importance, CLIQUE, that highlights locally dependent relationships, provides improved stability over permutation-based methods, and can be directly applied to multi-class classification problems. Simulated and real-world examples show that CLIQUE emphasizes locally dependent information, captures interaction behavior beyond what can be evaluated by correlations, and assigns zero importance in regions where the response is invariant to changes in variables.

04.
arXiv (CS.AI) 2026-06-16

StyleShield: Exposing the Fragility of AIGC Detectors through Continuous Controllable Style Transfer

arXiv:2605.00924v2 Announce Type: replace-cross Abstract: AI-generated content (AIGC) detectors are increasingly deployed in high-stakes settings such as academic integrity screening, yet their reliability rests on a fundamental paradox: as language models are trained on human-written corpora, the statistical boundary between AI and human writing will inevitably dissolve as models improve. Commercial incentives have further distorted this landscape – detection services and "de-AIification" tools often operate within the same supply chain, replacing evaluation of content quality with judgment of content origin. We present StyleShield, the first flow matching framework for conditional text style transfer, operating directly in continuous token embedding space via a DiT backbone with zero-initialized cross-attention adapters conditioned on frozen Qwen-7B representations. At inference, we adapt the SDEdit paradigm from image synthesis to text embeddings, with a single parameter gamma providing smooth continuous control over the evasion-preservation trade-off. On a multi-domain Chinese benchmark, StyleShield achieves 94.6% evasion against the training detector and >=99% against three unseen detectors, maintaining 0.928 semantic similarity. We further introduce RateAudit, a document-level scheduling algorithm that demonstrates detection-rate verdicts can be set to arbitrary values, directly questioning the reliability of score-based evaluation.

05.
arXiv (CS.AI) 2026-06-11

On the Limits of LLM-as-Judge for Scientific Novelty Assessment

arXiv:2606.12071v1 Announce Type: cross Abstract: LLMs are increasingly used to generate and judge scientific ideas. This makes novelty evaluation a central problem. Full idea evaluation is difficult because it often requires judging a method, its feasibility, and its empirical promise. We therefore study a cleaner upstream object: the research question (RQ). RQ generation is a prerequisite for scientific ideation, and RQs can be compared against questions pursued in real papers. We introduce RQ-Bench, a benchmark built from recent arXiv papers. For each paper, we reconstruct author-anchored RQs from its cited background, gaps, and contributions. These RQs are not the only valid questions for the same background. They are author-anchored reference points for testing novelty judgments. We evaluate model-generated RQs with standalone LLM judging, comparative LLM judging, and human expert evaluation. LLM judges consistently rate model-generated RQs as highly novel, producing a novelty mirage; in comparative evaluations, this preference becomes even stronger. Domain experts, however, reach the opposite conclusion and prefer the author-anchored reference questions. We further find that many generated RQs are narrow or source-bound, a dimension that LLM judges often miss unless explicitly tested. Overall, the contradictory novelty evaluations between LLM judges and human experts raise a serious concern about the reliability of using LLMs to assess the scientific novelty of research questions.

06.
arXiv (CS.LG) 2026-06-16

ReQAT: Achieving Full-Precision Reasoning Accuracy with 4-bit Floating-Point Quantization-Aware Training

arXiv:2606.15682v1 Announce Type: new Abstract: Large Reasoning Models (LRMs) achieve strong problem-solving through long chain-of-thought, but their deployment is constrained by the high cost of full-precision inference and growing KV cache footprints. Microscaled FP4 formats enable efficient FP4 deployment; however, fully quantizing weights, activations, and KV caches (W4A4KV4) causes severe reasoning degradation that existing PTQ and QAT fail to recover. We identify that FP4 failures concentrate on low-entropy tokens–precise symbolic commitments such as digits and operators–where quantization noise inflates sampling errors that cascade through reasoning traces. Based on this insight, we propose ReQAT, a reasoning-centric FP4 training framework with three components: (i) Trace-Aligned QAT (TAQ), which revisits identical reasoning traces to focus updates on critical low-entropy decisions; (ii) Selective Entropy Minimization (SEM), which reinforces confidence at low-entropy positions; and (iii) Q-FIT, a quantization-friendly initialization that jointly calibrates RoPE-consistent KV cache transformations to stabilize QAT. Under the same training budget, ReQAT not only recovers but surpasses BF16 fine-tuning accuracy, while delivering up to 3.9x throughput speedup on NVIDIA DGX Spark and 3.1x on B200.

07.
arXiv (quant-ph) 2026-06-19

Solving Nonequilibrium Dynamics via Influence Matrix Bootstrap: Floquet-PXP Model

arXiv:2606.19430v1 Announce Type: new Abstract: Studies of integrable systems have profoundly deepened the fundamental understanding of quantum many-body physics. While equilibrium properties such as ground states and thermodynamics can often be characterized efficiently, accurately characterizing nonequilibrium integrable dynamics remains a significant challenge. Here, we address this problem in the "Rule 201" quantum cellular automaton, an integrable Trotterization of the PXP Hamiltonian. Using the tensor-network approach of the influence matrix, we develop local conditions called generalized zipper conditions that allow exact solutions of local dynamics. We also introduce a numerical bootstrap method for solving influence matrices with finite but relatively large bond dimensions. This uncovers a rich landscape of nonequilibrium behavior exhibiting initial-state dependence. As an example, we investigate the fate of persistent oscillating dynamics under local non-integrable perturbations, and present analytical results for non-thermal relaxation constrained by conservation laws. We also obtain numerically exact results for entanglement growth across a broad class of initial states. Furthermore, from an information-theoretic perspective, we identify a refined structure of multitime correlations termed the hidden Markov order: the memory encoded in the dynamics separates into finite-length and long-range distributed components, which becomes transparent in an exact split-index matrix-product-state representation of the influence matrix. Our approach enables unified investigations of nonthermalizing and thermalizing regimes of nonequilibrium dynamics within a single analytically tractable model, and can be tested experimentally in state-of-the-art quantum simulators such as Rydberg atom arrays.

08.
arXiv (CS.CL) 2026-06-12

HKVM-RAG: Key-Value-Separated Hypergraph Evidence Organization for Multi-Hop RAG

Multi-hop RAG poses a data-engineering problem beyond passage matching: under fixed retrieval budgets, a system must organize retrieved text into evidence units that expose answer chains. Dense retrievers score passages independently, while graph-based memories make associations explicit but often rely on pairwise or entity-centered keys that fragment multi-hop evidence. We present HKVM-RAG, a key-value-separated evidence-organization layer. It assembles answer-path hyperedges from cached passage-level LLM evidence tuples and uses them as retrieval keys, while retaining passage text as answer values. To isolate key-space design, our fixed-substrate protocol holds the tuple cache, candidate passages, reader, and evaluation budget constant across pairwise graph and hypergraph variants. Weighted hypergraph key-value retrieval improves over KG-PPR by +3.426 F1 on 2WikiMultiHopQA and +3.592 F1 on MuSiQue; HotpotQA shows that higher structured support coverage need not yield standalone answer-F1 gains. We therefore study WHG-KV as an evidence-control signal rather than a dense-retrieval replacement. Oracle and train-to-dev analyses identify support selection as repairable, and a dense-aware controller combines frozen ColBERTv2 and HKVM rank/score features using out-of-fold HKVM predictions. It reaches 88.846, 65.073, and 85.810 F1 on the three benchmarks, improving over ColBERTv2 by +11.084, +6.763, and +5.966 F1. Source-level ablations show that matched non-WHG structured signals do not match the WHG-KV gains. These results provide bounded evidence that key-value-separated hypergraph organization can serve as a reusable evidence-control mechanism for multi-hop RAG.

09.
arXiv (CS.CV) 2026-06-11

FOCUS on Contamination: Hydrology-Informed Noise-Aware Learning for Geospatial PFAS Mapping

Per- and polyfluoroalkyl substances (PFAS) are persistent environmental contaminants with significant public health impacts, yet large-scale monitoring remains severely limited due to the high cost and logistical challenges of field sampling. The lack of samples leads to difficulty simulating their spread with physical models and limited scientific understanding of PFAS transport in surface waters. Yet, rich geospatial and satellite-derived data describing land cover, hydrology, and industrial activity are widely available. We introduce FOCUS, a geospatial deep learning framework for PFAS contamination mapping that integrates sparse PFAS observations with large-scale environmental context, including priors derived from hydrological connectivity, land cover, source proximity, and sampling distance. These priors are integrated into a principled, noise-aware loss, yielding a robust training objective under sparse labels. Across extensive ablations, robustness analyses, and real-world validation, FOCUS consistently outperforms baselines including sparse segmentation, Kriging, and pollutant transport simulations, while preserving spatial coherence and scalability over large regions. Our results demonstrate how AI can support environmental science by providing screening-level risk maps that prioritize follow-up sampling and help connect potential sources to surface-water contamination patterns in the absence of complete physical models.

10.
arXiv (CS.CV) 2026-06-16

Decoupling Semantics from Distortions: Multi-Scale Two-Stream Vision-Language Alignment for AI-Generated Image Quality Assessment

Authors:

Existing vision-language model (VLM)-based AI-generated image quality assessment (AIGIQA) methods suffer from a fundamental semantic-distortion dimensional conflict: monolithic representations optimized for semantic discrimination inherently entangle compositional understanding with low-level perceptual sensitivity, rendering them blind to fine-grained quality degradations. We introduce MST-CLIPIQA, a multi-scale two-stream framework that achieves hierarchical vision-language alignment through explicit representational decoupling. Our architecture leverages dual CLIP encoders with complementary patch granularities: coarse-grained streams capture global semantic coherence while fine-grained streams preserve textural signatures and artifact patterns. An information bottleneck-inspired gated fusion mechanism performs adaptive cross-scale distillation, with optional cross-attention enabling prompt-anchored correspondence evaluation when generation prompts are available. Extensive experiments across five benchmarks establish new state-of-the-art results, achieving average improvements of 1.11 percent SRCC on quality and 2.35 percent SRCC on text-image correspondence prediction, while maintaining efficiency with only 0.8M trainable parameters. Our project is available at https://github.com/YMlinfeng/MST-CLIPIQA.

11.
arXiv (CS.CV) 2026-06-16

Exact Posterior Score Estimation for Solving Linear Inverse Problems

Diffusion and flow-based models learn powerful data priors by training a denoiser to reverse Gaussian corruption. To use this prior to solve a linear inverse problem, one needs to sample from the posterior, but the score that the prior provides is the unconditional score, not the posterior score. Existing methods either steer a fixed pretrained denoiser with approximate measurement-matching corrections, or train a conditional restoration model that abandons the denoising structure of the prior. We derive the exact posterior score in closed form for linear Gaussian inverse problems under general Gaussian interpolants, and show that posterior sampling reduces to a denoising problem at an operator-dependent shifted pivot under an anisotropic noise covariance. We turn this identity into Exact Posterior Score (EPS), a denoising training objective that preserves the input/output structure of standard pretraining and can therefore be trained from scratch or fine-tuned from a pretrained denoiser. At inference, EPS uses the same sampler as the underlying backbone, with no likelihood gradients or projections. We evaluate EPS on five linear inverse problems across FFHQ and ImageNet, where it outperforms training-free and training-based baselines on fidelity, perceptual, and distributional metrics, while using roughly an order of magnitude fewer denoiser evaluations than gradient-based posterior samplers.

12.
PLOS Medicine 2026-06-12

Comparison of count-based and clustering definitions of multimorbidity and their association with prevalence of multimorbidity, health profiles, and mortality: A cohort study of UK Biobank participants

by Gabriella C. Silva, Aurore Fayosse, Louis Jacob, Séverine Sabia, Archana Singh-Manoux, Benjamin Landré Background Multimorbidity, the presence of several chronic conditions, is linked to higher mortality and healthcare use and thus poses a major challenge for aging populations. While most studies rely on simple counts of conditions, clustering approaches have been proposed to describe patterns of co-occurring diseases. We aimed to evaluate the extent to which these methodological choices influence prevalence and association with health profiles and mortality. Methods and findings Using UK Biobank baseline data (n = 474,397), collected between 2006 and 2010, we compared six count-based definitions of multimorbidity based on different condition lists (extended, most prevalent, or body systems) and thresholds (≥2 versus ≥3 conditions). We also applied a clustering analysis to characterize subtypes of multimorbidity among participants with at least two chronic conditions. We compared prevalence and associations with concurrent health outcomes (polypharmacy, self-rated health, frailty, falls, surgery, chronic pain), blood-based measures (C-reactive protein, Cystatin-C, HDL, LDL Cholesterol, IGF-1), and 3- and 10-year mortality risks. Analyses were undertaken separately in men and women using multivariable regression models adjusted for sociodemographic characteristics and body mass index. Multimorbidity prevalence ranged from 1.0% (cluster-based) to 35.3% (count-based). Count-based definitions using lists with more conditions yielded higher prevalence. Higher thresholds identified more severe health profiles on all measured health outcomes, blood-based measures, but not higher mortality risks. Associations with blood-based measures were more pronounced using clustering, with the highest differences from the standard definition distributed across clusters. Odds ratios for 3-year mortality ranged from 1.44 [1.26; 1.64] to 4.60 [3.73; 5.62] for men and 1.35 [1.07; 1.69] to 3.83 [2.78; 5.14] for women. For 10-year mortality, they ranged from 1.42 [1.34; 1.50] to 3.86 [3.46; 4.30] in men and 1.29 [1.21; 1.39] to 3.33 [2.93; 3.77] for women, with clustering identifying groups with low prevalence and high mortality risks. Findings should be interpreted in light of the selected nature of the UK Biobank cohort and the cross-sectional assessment of several health indicators. Conclusion Operational definitions of multimorbidity substantially influence prevalence estimates, while associations with mortality appear more robust across count-based approaches. Clustering analyses provide complementary insights into heterogeneity within multimorbid populations. Future translational studies are warranted to determine how multimorbidity definitions can be optimized to ultimately improve clinical management and health outcomes in practice.

13.
arXiv (CS.AI) 2026-06-16

Adaptive and Explicit safe: Triggering Latent Safety Awareness in Large Reasoning Models

arXiv:2606.16808v1 Announce Type: new Abstract: While Large Reasoning Models (LRMs) excel at complex tasks, they remain highly vulnerable to sophisticated jailbreaks and direct harmful queries. To address this vulnerability, prior works depend heavily on external manual data annotation for safety alignment. However, we observe that LRMs can inherently identify safety risks when being re-presented with original queries alongside their own reasoning trajectories – a capability we term Latent Safety Awareness. To leverage this safety awareness, we first employ Supervised Fine-Tuning (SFT) to explicitly induce safe tags to trigger safety analysis and guidance following the initial reasoning content for unsafe queries, while preserving standard responses for general queries to ensure adaptive triggering. Subsequently, we apply Direct Preference Optimization (DPO) to further enhance the correctness and stability of the safety analysis and guidance. Notably, responses required for both training stages are entirely generated by models being optimized. With (Safe Trigger) SFT and DPO, experimental results demonstrate significant safety enhancement. For example, the Attack Success Rate (ASR) of DeepSeek-R1-Distill-Llama-8B, on average, drops 24.65% and 36.72% on harmful and jailbreak benchmarks, respectively. Finally, our Safe Trigger method exerts almost no negative impact on general performance or user experience.

14.
arXiv (CS.CV) 2026-06-19

Pixel-Level Residual Diffusion Transformer: Scalable 3D CT Volume Generation

Generating high-resolution 3D CT volumes with fine details remains challenging due to substantial computational demands and optimization difficulties inherent to existing generative models. In this paper, we propose the Pixel-Level Residual Diffusion Transformer (PRDiT), a scalable generative framework that synthesizes high-quality 3D medical volumes directly at voxel-level. PRDiT introduces a two-stage training architecture comprising 1) a local denoiser in the form of an MLP-based blind estimator operating on overlapping 3D patches to separate low-frequency structures efficiently, and 2) a global residual diffusion transformer employing memory-efficient attention to model and refine high-frequency residuals across entire volumes. This coarse-to-fine modeling strategy simplifies optimization, enhances training stability, and effectively preserves subtle structures without the limitations of an autoencoder bottleneck. Extensive experiments conducted on the LIDC-IDRI and RAD-ChestCT datasets demonstrate that PRDiT consistently outperforms state-of-the-art models, such as HA-GAN, 3D LDM and WDM-3D, achieving significantly lower 3D FID, MMD and Wasserstein distance scores.

15.
arXiv (CS.LG) 2026-06-12

Scalable anomaly detection via a univariate Christoffel function

arXiv:2606.12483v1 Announce Type: new Abstract: Anomaly detection plays a critical role in identifying unusual patterns across domains such as fraud detection, network intrusion, and system fault diagnosis. Recently, Christoffel function-based methods, rooted in polynomial optimization, have emerged as promising alternatives to deep learning due to their strong mathematical foundations and computational frugality. However, their practical applicability is hindered by the need to invert a matrix whose size grows exponentially with the data dimension, rendering the method intractable even for moderate-dimensional datasets. This paper addresses the dimensionality limitations of Christoffel function-based anomaly detection while preserving its key theoretical properties, i.e., the on-off support dichotomy behavior and the accurate support shape capture. We introduce UCF, a univariate Christoffel function which is based on the squared distance between the query point and the support points. Extensive experiments on the ADBench benchmark demonstrate that UCF consistently outperforms 14 state-of-the-art baselines in terms of Average Precision. By resolving the scalability bottleneck of the Christoffel Function, this work expands the toolkit of anomaly detection methods with a robust, theoretically grounded, and universally applicable approach.

16.
arXiv (math.PR) 2026-06-17

Critical spectral behavior and large deviations for geometric $\alpha$-stable processes

arXiv:2606.17501v1 Announce Type: new Abstract: In this paper, we study the Schrödinger-type operator associated with geometric stable processes on $\mathbb{R}^{d}$, especially the differentiability of spectral function. Let $\mathcal{H}$ be the generator of the geometric stable process and $\mu$ a smooth measure on $\mathbb{R}^{d}$. Then the spectral function $C(\theta)$ is defined as $C(\theta) = -\inf \sigma(-\mathcal{H} - \theta \mu)$, where $\sigma(\mathcal{A})$ denotes the spectrum of $\mathcal{A}$ and $\theta$ is a real parameter. Since the geometric stable process exhibits severe local singularities in its Lévy measure, its transition semigroup lacks ultracontractivity, which invalidates classical methods for proving the differentiability. To overcome this obstacle, we use the compact embedding of the extended Dirichlet space into $L^2(\mu)$. As a primary application of this differentiability, we establish a large deviation principle for a positive continuous additive functional associated with the smooth measure $\mu$.

17.
arXiv (quant-ph) 2026-06-17

Microwave-free vector magnetometry and crystal orientation determination with Nitrogen-Vacancy centers using Bayesian inference

arXiv:2512.13835v2 Announce Type: replace Abstract: Nitrogen-vacancy (NV) centers in diamond provide a solid-state platform for quantum sensing. While optically detected magnetic resonance techniques offer high sensitivity, their reliance on microwaves introduces heating and stray electromagnetic fields that can perturb nearby samples. Optical approaches based on cross-relaxation between differently oriented NV centers remove this constraint but have so far required stringent alignment of the external field with crystallographic axes, restricting their practicality. Here we introduce a general framework for microwave-free vector magnetometry at near-zero field that leverages Bayesian inference to extract both the magnetic field vector and the NV orientation directly from photoluminescence maps. An analytical model of cross-relaxation resonances enables efficient inference under arbitrary field and orientation configurations, while naturally incorporating the discrete degeneracies of the NV symmetry. We experimentally demonstrate robust orientation determination and vector-field reconstruction, establishing a general route toward compact and alignment-free NV magnetometers for practical sensing applications.

18.
medRxiv (Medicine) 2026-06-15

Investigation of Intra-Fraction Stability and Inter-Fraction Reproducibility of Deep Inspiration Breath-Hold Across Two Hypofractionated Radiotherapy Regimens in the HYPORT Adjuvant Study.

Background: Deep Inspiration Breath Hold (DIBH) is a widely used respiratory motion management technique for minimizing cardiac dose in left-sided breast radiotherapy. In the Breast HYPORT Adjuvant study, DIBH was employed for cardiac sparing in patients without nodal irradiation using a standardized institutional protocol with the Varian Real-time Position Management (RPM) system. Both moderate-hypofractionation (control arm - 40Gy in 15 fractions) and one-week hypofractionation (experimental arm - 26 Gy in 5 fractions) regimens were delivered using this protocol. This study aimed to evaluate the robustness of DIBH by analyzing intra-fraction stability and inter-fraction reproducibility of breath-hold amplitude across the two treatment regimens. Methods: Respiratory waveforms acquired during each treatment session were analyzed to determine the median breath-hold amplitude and its standard deviation during beam delivery. Intra-fraction stability was assessed from vari- ations within individual treatment sessions, while inter-fraction reproducibility was evaluated relative to the simula- tion waveform amplitude across all treatment sessions. These parameters were compared between the two HYPORT regimens to examine breath-hold consistency during treatment delivery. Moreover, an additional comparison was made between the one-week hypofractionation regimen and the first five fractions of the moderate-hypofractionation regimen to evaluate the effect of treatment duration . Lung volumes from free-breathing and DIBH CT scans were analyzed to assess the effectiveness of patient breath-hold training. Results: Both arms demonstrated an average 1.7-fold increase of air volume in lung during the breath-hold position, confirming the effective implementation of DIBH during treatment planning and delivery. Structured training resulted in increased breath-hold amplitudes, with gains of 22.87% and 24.16% with respect to the first trial session in the experimental and control arms, respectively. Both regimens receive equivalent doses for approximately the same air volume in lung . Despite the different prescription doses in the two arms (26 Gy vs. 40 Gy), the experimental arm achieved an equivalent mean heart dose of 2.91% (75.6 cGy) compared with 2.95% (118.51 cGy) in the control arm, suggesting a similar cardiac preservation protocol adopted during treatment planning. Intra-fraction stability was similar between the control arm and the experimental arm, with median amplitude variations of 1.006 mm (95% CI: [0.998-1.015]) and 1.079 mm (95% CI: [1.067-1.097]), respectively. In contrast, inter-fraction reproducibility improved in the experimental arm, with lower deviation from simulation amplitude (0.44 {+/-} 0.24 mm vs. 0.66 {+/-} 0.25 mm) for the entire treatment schedule. The stability and reproducibility of experimental arm were further compared with the first five fractions of the control arm. The results were similar to those of the experimental arm. Conclusion: In this study, we compared two treatment regimens in terms of intra-fraction stability and inter-fraction reproducibility during DIBH radiotherapy. Both regimens demonstrated comparable intra-fraction stability, indicating effective motion management irrespective of treatment duration. However, the experimental arm showed better inter- fraction reproducibility, suggesting more consistent breath-hold performance throughout the treatment course. Based on stability and reproducibility, a reasonable narrowing of the DIBH gating window may be implemented with minor changes to the institutional protocol. The observed trend highlights the potential for improved consistency with the experimental approach and supports further investigation to better understand the underlying factors and strengthen these findings in future studies.

19.
arXiv (CS.CL) 2026-06-16

Adapting Reinforcement Learning with Chain-of-Thought Supervision for Explainable Detection of Hateful and Propagandistic Memes

Hateful and propagandistic memes exploit the interplay between images and text to convey harmful intent that neither modality reveals alone. Although thinking-based multimodal large language models (MLLMs) have advanced vision-language understanding, their application to meme content moderation remains underexplored. We propose a reinforcement learning-based post-training method that improves classification performance and reference-based explanation quality in thinking-based MLLMs via task-specific rewards and Group Relative Policy Optimization (GRPO). Concretely, we (i) conduct a systematic empirical study of off-the-shelf MLLMs for hateful and propagandistic meme understanding across English and Arabic benchmarks, (ii) extend existing meme datasets with weakly supervised chain-of-thought (CoT) rationales via distillation and multi-LLM fine-grained propaganda annotations, (iii) introduce a GRPO-based objective with thinking-length regularization that jointly optimizes classification accuracy and explanation quality, and (iv) investigate self-supervised GRPO on unlabeled memes using consensus-based pseudo-labels. Experiments on the Hateful Memes and ArMeme benchmarks show that our approach improves over previously reported results on FHM accuracy (up to +2.1%, from 79.9% to 82.0%) and on ArMeme macro-F1 (up to +7.6 points, from 0.536 to 0.612 with explanations; +6.1 compared to the original ArMeme benchmark), while also generating natural-language explanations. On ArMeme, sequence-classification baselines remain stronger in terms of raw accuracy, whereas our approach provides more balanced per-class performance along with explanations. We publicly release our code, data extensions, and evaluation resources.

21.
arXiv (CS.LG) 2026-06-19

SEAGAN: domain-Specific and Edge-Aware Graph Attention Network for Dynamic Plant Processes

arXiv:2606.19623v1 Announce Type: new Abstract: Graph neural networks (GNNs) provide a flexible framework for learning from scientific data linked through physical, biological, or functional relationships. One promising domain is plant physiology, where measured responses often arise from multiple interacting processes whose exact separation remains difficult even with manual intervention. In plant physiology, a key example is the A-Ci curve, which relates net CO2 assimilation rate (Anet) to leaf intercellular CO2 concentration (Ci) and is used to estimate photosynthetic parameters in leaf and crop-canopy models. However, reliable estimation requires identifying the active biochemical limitation state at each curve point, which remains a major source of uncertainty. Here, we formulate limitation-state identification along A-Ci curves as a graph-based node classification problem, with curve points as nodes. Domain-specific graph representations are created using distance-based k-nearest-neighbor (kNN) and auxiliary-signal-guided (ASG) connectivity, with edge attributes encoding pairwise relations. The framework was evaluated against conventional learning baselines, graph-based architectures, and an automated fitting-based benchmark. Results on a large synthetic dataset with known ground-truth limitation states show that graph-based models improve classification, particularly near biochemical transition regions. The best-performing configuration, SEAGAN (domain-Specific and Edge-Aware Graph Attention Network for Dynamic Plant Processes), integrates process-aware node features, edge attributes, kNN connectivity, and graph attention with weighted cross-entropy loss, achieving an F1-score of 0.857 and an accuracy of 0.882. The results show that representing A-Ci curves as graphs improves biochemical limitation-state analysis, with edge-aware attention over local kNN neighborhoods providing the most effective strategy.

22.
arXiv (CS.CV) 2026-06-16

MVOFormer: Flow-Semantic Transformer for Robust Monocular Visual Odometry

Monocular visual odometry (MVO) is foundational to autonomous navigation and robotic localization. However, existing learning-based MVO approaches often struggle with either a lack of interpretable, complementary features or overly complex multi-stage architectures. These limitations inherently restrict their robustness and cross-domain generalization. In this work, we propose MVOFormer, a novel transformer framework for robust monocular visual odometry. Our architecture features a Flow-Semantic Dual Branch Encoder that synergizes dense geometric motion cues with object-centric semantic priors, explicitly distinguishing static structures from dynamic distractors. These representations are then fused by an Iterative Multimodal Decoder, enabling coarse-to-fine pose refinement while dynamically suppressing attention on unreliable regions. Extensive evaluations demonstrate that, without any target-domain fine-tuning, MVOFormer achieves superior zero-shot generalization and robustness, significantly outperforming prior learning-based frame-to-frame methods across diverse benchmarks including TartanAir, KITTI, TUM-RGBD, and ETH3D-SLAM.

23.
arXiv (CS.LG) 2026-06-24

Project Ariadne: Prompt-Conditioned Route Generation for Synthesis Planning

arXiv:2606.24184v1 Announce Type: new Abstract: Retrosynthetic planning seeks to connect a target molecule to commercially available starting materials through a multistep route. Classical planners construct such routes by iteratively applying single-step reaction models within a search procedure; constrained variants often require specialized algorithms or architectural changes. Direct route generation reframes retrosynthesis as sequence generation, but existing direct-generation methods still train separate models for different planning specifications. We introduce Ariadne, a decoder-only route generator that represents the target, optional constraints, and route in one prompt-completion sequence. On the RetroCast/PaRoutes mkt-cnv-160 benchmark family, one 24-layer checkpoint follows route-depth and required-starting-material prompts: adding the corresponding prompt fields raises Solv-0 by 13.7 points for depth constraints and 31.2 points for required-leaf constraints. Ariadne also improves over DESP, a bidirectional search planner, on required-leaf Top-10 and Solv-0 in 24 GPU-minutes versus 6.8 GPU-hours. On standard reconstruction, Ariadne is comparable to DMS Explorer XL at about half the reported inference time. Across additional target-only benchmarks, Ariadne's clearest gains are on route-holdout reconstruction, whereas AiZynthFinder MCTS remains stronger on several Solv-0 comparisons. These results extend sequence generation from specialist retrosynthesis models to prompt-conditioned structural route generation. We release the codebase and training scripts to support further work, but do not introduce Tier-1–3 route checkers; those remain the main bottleneck before models of this kind can become useful to experimental chemists.

24.
medRxiv (Medicine) 2026-06-17

Accounting for Human Movement to Improve Exposure-Health Models

Background. Current exposure-health models rely on averaged, residential-based environmental exposures, failing to account for human movement. This aggregation can lead to exposure misclassification and biased exposure-response estimates, potentially distorting our understanding of the true health effects of environmental conditions. We developed exposure disaggregation regression models that explicitly account for human movement when linking environmental exposures to health outcomes. Methods. By weighting pixel-level exposures according to distance from home as a simple proxy for human movement, our model linked disaggregated environmental exposures to individual-level health outcomes. Weights were either fixed a priori or derived from a latent distance-decay power parameter learned from the data. We additionally evaluated model performance under a nonlinear exposure-response relationship. Model performance was assessed across multiple sample sizes (N = 1,114; 50,000; and 100,000). A simulation study examined parameter recovery using bias, empirical standard error (EmpSE), and credible interval coverage. As a case study, Demographic and Health Surveys (DHS) data from Albania were used to link acute respiratory infection (ARI) outcomes among children under five to pixel-level NDVI within a 3 km buffer around DHS cluster centroids, and the proposed models were applied to these data. Results. Across all models (fixed-weight, learned-weight, and restricted cubic spline models), parameter recovery improved with increasing sample size. At N = 1,114, estimates were biased and imprecise, with incorrect effect direction for exposure-response parameters (e.g., learned-weight {beta}1 bias = - 0.79; EmpSE = 2.61; coverage = 0.88). In contrast, the models accurately recovered parameters at larger sample sizes, including the latent distance-decay parameter (bias = - 0.02; EmpSE = 0.15; coverage = 0.95 at N = 100,000), demonstrating their ability to reliably learn movement-based exposure weights when sufficient data were available. Conclusion. Instead of relying on arbitrarily-sized buffers, this statistical framework provides a novel method for studying environmental exposure-health relationships whilst accounting for human movement. With sufficiently large sample sizes, it can accurately estimate the influence of disaggregated environmental exposures on individual-level health and help address exposure misclassification arising from residential-only metrics. This methodological framework remains scalable, interpretable, and adaptable to other exposures and outcomes, offering a foundation for future work that integrates richer mobility-informed exposure-health research.

25.
arXiv (CS.AI) 2026-06-15

Tackling GNARLy Problems: Graph Neural Algorithmic Reasoning Reimagined through Reinforcement Learning

arXiv:2509.18930v3 Announce Type: replace-cross Abstract: Neural algorithmic reasoning (NAR) is a paradigm that trains neural networks to execute classic algorithms by supervised learning. Despite its successes, important limitations remain: inability to construct valid solutions without post-processing and to reason about multiple correct ones, poor performance on combinatorial NP-hard problems, and inapplicability to problems for which strong algorithms are not yet known. To address these limitations, we reframe the problem of learning algorithm trajectories as a Markov decision process, which imposes structure on the solution construction procedure and unlocks the powerful tools of imitation and reinforcement learning (RL). We propose the GNARL framework, encompassing the methodology to translate problem formulations from NAR to RL and a learning architecture suitable for a wide range of graph-based problems. We achieve very high graph accuracy results on several CLRS-30 problems, performance matching or exceeding much narrower NAR approaches for NP-hard problems and, remarkably, applicability even when lacking an expert algorithm.