Paper Plaza - AcademicHub

01.

arXiv (quant-ph) 2026-06-19 DOI: arXiv:2606.19589

Emergency hub placement with a neutral-atom quantum computer

Authors:

Sara Tarquini ↗Matteo Vandelli ↗Francesco Ferrari ↗Daniele Dragoni ↗Francesco Tudisco ↗

arXiv:2606.19589v1 Announce Type: new Abstract: We study the problem of emergency operation center placement in disaster response, where a minimal number of hubs must be selected to ensure timely coverage of all affected locations. This task can be formulated as a minimum dominating set problem on a graph encoding reachability within a target response time. We propose a hybrid quantum-classical approximation framework that leverages neutral-atom quantum computers as independent set samplers. Candidate dominating sets are constructed from both small maximal independent sets and complements of large independent sets, and are subsequently refined via a lightweight classical procedure. We benchmark the approach on synthetic instances and realistic case studies, and implement it on the Fresnel quantum processor by Pasqal, solving instances of up to 100 nodes. Our results show that quantum-generated samples, despite hardware noise, enable near-optimal solutions of the placement problem. Overall, our results demonstrate that neutral-atom devices operating in analog mode can already be used to tackle graph optimization problems for real-world applications.

Read & Discuss → View Source →

02.

arXiv (CS.AI) 2026-06-18 DOI: arXiv:2606.19116

Towards an Agent-First Web: Redesigning the Web for AI Agents

Authors:

arXiv:2606.19116v1 Announce Type: new Abstract: The World Wide Web was built on an assumption held for three decades: the primary consumer of web content is a human being. This permeates every layer; its access model presumes human visitors, its economics rest on human attention, and its content targets human perception. The rapid emergence of AI agents as intermediaries between humans and web content invalidates this assumption. Yet the web resists agents through blanket blocking, CAPTCHA-based exclusion, and economic models that treat agent access as extraction rather than legitimate interaction. This paper proposes a principled redesign across three layers. At the access layer, agents acting for humans should inherit equivalent access rights, governed by rate limiting and agent identification metadata in HTTP requests, analogous to browser headers, alongside a dual-layer architecture serving human-readable and agent-optimized content from the same domain. At the economic layer, we propose an intent-based tier framework grounded in the agent-as-human-proxy principle: an agent's economic obligation mirrors that of the human it represents. A token-based subscription model meters content in tokens rather than pageviews, alongside a commissioned content economy anchoring AI content production in human intentionality. At the content layer, we identify epistemic recursion, the self-referential loop in which AI-generated content is consumed by agents to produce further content, progressively detaching web knowledge from human ground truth. We propose the Agent Text Markup Language (ATML), a four-level human supervision tier model, and a cryptographic provenance chain to counter this threat. Together these constitute ten design principles for an agent-first internet, one in which agents are first-class citizens whose integration requires renegotiating the web's foundational social contract across access, economics, and content.

Read & Discuss → View Source →

03.

arXiv (CS.AI) 2026-06-18 DOI: arXiv:2606.18897

SAERec: Constructing Fine-grained Interpretable Intents Priors via Sparse Autoencoders for Recommendation

Authors:

Jiangnan Xia ↗Xuansheng Wu ↗Yu Yang ↗Xin Wang ↗Ninghao Liu ↗

arXiv:2606.18897v1 Announce Type: cross Abstract: Intent-based recommender systems have gained significant attention for improving accuracy and interpretability by modeling the underlying motivations behind user behaviors. Most existing models derive intents directly from user sequences via clustering or prototype learning. However, they are sensitive to sequence quality, require presetting the number of intents, and lack explicit semantic grounding. These issues lead to an incomplete and coarse intent set and limit the effectiveness of recommendation. In this paper, we propose the Sparse Autoencoder for intent-based recommendation (SAERec), a novel recommender that automatically constructs a fine-grained and interpretable intent space from a textual corpus to guide recommendation. Rather than treating texts as side signals, SAERec leverages them as high information density evidence for intent construction. Specifically, we first extract a comprehensive set of fine-grained interpretable intents from the latent space of large language models (LLMs) by using a sparse autoencoder (SAE) to disentangle and interpret text embeddings, which isolates intent-related semantics from textual noise. Then, for each user, we retrieve relevant intents from this set as priors to guide recommendation. It contains personal intents matching a user's current interests and public intents capturing general item patterns shared across users (e.g., quality, price). Finally, to integrate retrieved intents into sequence modeling, we propose a multi-branch attention mechanism that captures temporal dependencies and injects both personal and public intent signals, followed by an adaptive fusion layer to construct the final user representation for recommendation. Extensive experiments on public datasets demonstrate the superiority of SAERec, consistently outperforming state-of-the-art baselines while providing human-understandable explanations.

Read & Discuss → View Source →

04.

arXiv (CS.AI) 2026-06-12 DOI: arXiv:2602.10132

TokaMark: A Comprehensive Benchmark for MAST Tokamak Plasma Models

Authors:

arXiv:2602.10132v3 Announce Type: replace-cross Abstract: Development and operation of commercially viable fusion energy reactors such as tokamaks require accurate predictions of plasma dynamics from sparse, noisy, and incomplete sensors readings. The complexity of the underlying physics and the heterogeneity of experimental data pose formidable challenges for conventional numerical methods, and highlight the promise of modern data-native approaches. A major obstacle in realizing this potential is, however, the lack of curated, openly available datasets and standardized benchmarks. Existing fusion datasets are scarce, fragmented across institutions, facility-specific, and inconsistently annotated, which limits reproducibility and prevents a fair and scalable comparison of AI approaches. In this paper, we introduce TokaMark, a structured benchmark to evaluate AI models on real experimental data collected from the Mega Ampere Spherical Tokamak (MAST). TokaMark provides a comprehensive suite of tools designed to unify access to multi-modal fusion data and standardize evaluation protocols. The benchmark includes a curated list of 14 tasks spanning a range of physical mechanisms, exploiting a variety of diagnostics and covering multiple operational use cases. A baseline model is provided to facilitate transparent comparison and validation within a unified framework. By establishing a unified benchmark, TokaMark aims to accelerate progress in data-driven AI-based plasma modeling, contributing to the broader goal of achieving sustainable and stable fusion energy. The dataset, benchmark, documentation, and tooling are open-sourced under https://github.com/UKAEA-IBM-STFC-Fusion-FMs/tokamark_baseline.

Read & Discuss → View Source →

05.

arXiv (CS.CL) 2026-06-15 DOI: arXiv:2509.20086

OLaPh: Optimal Language Phonemizer

Authors:

Johannes Wirth ↗

Phonemization is a critical component in text-to-speech synthesis. Traditional approaches rely on deterministic transformations and lexica, while neural methods offer potential for higher generalization on out-of-vocabulary (OOV) terms. We introduce OLaPh (Optimal Language Phonemizer), a hybrid framework that integrates extensive multilingual lexica with advanced NLP techniques and a statistical subword segmentation function. Evaluations on the WikiPron benchmark show OLaPh significantly outperforms established baselines in overall accuracy and maintains robustness on OOV data through advanced fallback mechanisms. To further explore neural generalization, we utilize the framework to synthesize a high-consistency training corpus for an instruction-tuned Large Language Model (LLM). While the deterministic framework remains more accurate overall, the LLM demonstrates strong generalization, matching or partly exceeding the framework's performance. This suggests that the LLM successfully internalized phonetic intuitions from the synthetic data that transcend the framework's capabilities. Together, these tools provide a comprehensive, open-source resource for multilingual grapheme-to-phoneme conversion (G2P) research.

Read & Discuss → View Source →

06.

arXiv (CS.CL) 2026-06-16 DOI: arXiv:2606.15984

ROMPAR: Morphological Completion and Demographic Unlearning for Romanian-Accented Speech Recognition

Authors:

Andrei-Marius Avram ↗Aureliu-Valentin Antonie ↗\c{S}tefan-Bogdan Badea ↗Andrei Florea ↗Robert-Nicolae Zaharoiu ↗Dumitru-Clementin Cercel ↗

Automated transcription of parliamentary proceedings faces significant hurdles due to demographic bias, dialectal variation, and technical artifacts such as utterance truncation during segmentation. This paper introduces the ROManian PARliamentary Speech Corpus (ROMPAR) dataset, a 17.80-hour corpus of Romanian and Moldavian parliamentary speech, featuring double-annotated ground truth and explicit labels for reconstructed word fragments. To build a robust ASR system, we propose a multi-task adversarial training framework that enforces demographic invariance across age, gender, and dialect. We address the inherent instability of adversarial objectives in generative architectures by introducing an exponential decay mechanism for the adversarial coefficients. Furthermore, we implement an LLM-guided decoding strategy with position-dependent weighting to facilitate morphological completion of truncated terminal words. Our results demonstrate that the proposed framework significantly reduces WER and achieves an F1-score of 96.6% in morphological reconstruction.

Read & Discuss → View Source →

07.

medRxiv (Medicine) 2026-06-11 DOI: HASH:c1a57498dc29b202287a19079ac0d6c4

Validity and Limitations of the Empatica E4 Wristband for Autonomic and Thermoregulatory Sleep Monitoring Against Concurrent Polysomnography: A Wearanize+ Dataset Study

Authors:

Parry ↗Y. D ↗Briganti ↗

The Empatica E4 wristband provides continuous multi-modal physiological monitoring including blood volume pulse (BVP), electrodermal activity (EDA) and skin temperature (TEMP) but its validity for sleep-stage-specific autonomic and thermoregulatory monitoring has not been systematically evaluated against concurrent polysomnography (PSG). Using the Wearanize+ dataset which provides synchronised PSG, Empatica E4, and Zmax EEG recordings from 100 home-recorded participants; a systematic validation of Empatica E4 physiological signals against PSG ground truth across five sleep stages was conducted. Of 100 participants, 92 had Empatica data; 69 met Zmax EEG signal quality criteria and formed the analysis sample. Heart rate (HR) from the pre-computed Empatica HR channel showed valid stage-specific patterns (Wake: 70.9 bpm, N3: 61.2 bpm) and moderate inter-device MeanNN correspondence with PSG ECG (Spearman r=0.35-0.42 across stages). Skin temperature showed the expected thermoregulatory pattern (Wake: 33.92C, N3: 35.48C) and is recommended for downstream analyses. Tonic EDA showed an inverted stage pattern attributable to wrist sweat accumulation during deep sleep, representing a known confound for wrist-worn EDA during sleep. Phasic EDA showed plausible patterns and may be used with caution. These findings establish a validated feature set for Empatica E4 sleep research and directly inform multimodal psychiatric biomarker studies using the Wearanize+ dataset.

Read & Discuss → View Source →

08.

arXiv (CS.AI) 2026-06-16 DOI: arXiv:2606.16456

SPRI: SVD-Partitioned Residual Initialization for Data-Constrained MoE Upcycling

Authors:

Weiqiao Shan ↗Ruixiang Mao ↗Yuang Li ↗Yuhao Zhang ↗Yingfeng Luo ↗Tong Zheng ↗Chen Xu ↗Yucheng Qiao ↗Chunxiang Jin ↗Yi Yuan ↗Jingdong Chen ↗Tong Xiao ↗…

arXiv:2606.16456v1 Announce Type: cross Abstract: Mixture-of-Experts (MoE) models enable efficient scaling, but training them from scratch remains prohibitively expensive. MoE upcycling mitigates this cost by converting pretrained dense models into sparse MoE models. However, existing upcycling methods typically rely on large-scale continued training and often perform poorly under data-constrained supervised adaptation, due to either homogeneous experts or overly disruptive perturbations to pretrained parameters. In this setting, effective upcycling must leverage pretrained weight structure while introducing sufficient diversity among routed experts. To this end, we propose SVD-Partitioned Residual Initialization (SPRI), which distributes SVD-partitioned residuals derived from pretrained feed-forward network (FFN) weights across routed experts, introducing controlled expert diversity grounded in pretrained spectral structure. We further introduce a two-stage training strategy to improve adaptation stability. We evaluate SPRI on multilingual speech-to-text translation, where limited supervised data challenges MoE upcycling and multiple target languages provide natural routing heterogeneity. On CoVoST2 across 15 En-to-XX directions, SPRI improves average BLEU and COMET over fully fine-tuned dense models by 2.58 and 3.32 points, respectively, and outperforms the prior best MoE upcycling baseline by 3.39 BLEU and 4.34 COMET points.

Read & Discuss → View Source →

09.

arXiv (CS.CV) 2026-06-16 DOI: arXiv:2605.09697

Discriminative Span as a Predictor of Synthetic Data Utility via Classifier Reconstruction

Authors:

Radhika Amar Desai ↗Modigari Narendra ↗

In many real-world computer vision applications, including medical imaging and industrial inspection, binary classification tasks are characterized by a severe scarcity of positive samples. A widely adopted solution is to generate synthetic positive data using image-to-image transformations applied to negative samples. However, a fundamental challenge remains: how can we reliably assess whether such synthetic data will improve downstream model performance? In this work, we propose a geometry-driven metric that predicts the utility of synthetic data without requiring model training. Our approach operates in the embedding space of a pre-trained foundation model and represents the dataset through difference vectors between samples. We evaluate whether the weight vector of a linear classifier can be expressed within the subspace spanned by these variations by measuring the relative projection error. Intuitively, if the variations induced by synthetic data capture task-relevant directions, their span can approximate the classifier, resulting in low projection error. Conversely, poor synthetic data fails to span these directions, leading to higher error. Across multiple datasets and architectures, we show that this metric exhibits strong correlation with downstream classification performance of CNNs trained on mixtures of real negative and synthetic positive data. These findings suggest that the proposed metric serves as a practical and informative tool for evaluating synthetic data quality in data-scarce settings.

Read & Discuss → View Source →

10.

arXiv (CS.LG) 2026-06-11 DOI: arXiv:2606.11508

Probabilistic Contrastive Pretraining for Multi-task ADME Property Prediction

Authors:

Yifan Xue ↗Srimukh Prasad Veccham ↗Saee Paliwal ↗Tyler Shimko ↗Micha Livne ↗

arXiv:2606.11508v1 Announce Type: new Abstract: Accurate prediction of absorption, distribution, metabolism, and excretion (ADME) properties is critical to drug discovery, but remains challenging because ADME endpoints are noisy, interdependent, and often data-limited. We propose a molecular graph-transformer pretraining framework that combines chemistry-specific self-supervision with contrastive mutual information machine learning (cMIM). Our method encodes molecular graphs into latent variables, reconstructs SMILES strings from the graph-derived latent codes, and augments the contrastive objective with domain-specific self-supervised chemistry tasks. Rather than treating these tasks as auxiliary regularizers with separately tuned loss weights, we formulate reconstruction, contrastive discrimination, and chemistry-specific supervision as unit-weighted log-probability factors in a single probabilistic latent-variable objective. For fine-tuning, we propose a multi-task GNN readout architecture with task-specific multilayer perceptron heads, preserving shared representation learning while mitigating negative transfer and improving the modeling of heterogeneous, nonlinear task relationships. Across Biogen, ExpansionRX, and ChEMBL-MT, the resulting Contrastive KERMT pretraining improves over the KERMT baseline by 7.6%, 9.9%, and 9.5% respectively (averaged over significantly-improved endpoints). Adding ADME-adjacent molecules to the pretraining corpus further improves transfer, and the contrastive component sharpens chemically meaningful latent neighborhoods.

Read & Discuss → View Source →

11.

arXiv (CS.AI) 2026-06-18 DOI: arXiv:2606.18803

ProfiLLM: Utility-Aligned Agentic User Profiling for Industrial Ride-Hailing Dispatch

Authors:

Tengfei Lyu ↗Zirui Yuan ↗Xu Liu ↗Kai Wan ↗Zihao Lu ↗Li Ma ↗Hao Liu ↗

arXiv:2606.18803v1 Announce Type: new Abstract: Bringing Large Language Models (LLMs) into industrial ride-hailing dispatch as semantic feature extractors over platform-scale behavioral logs is a compelling but under-explored data systems problem. Production matching pipelines remain dominated by structured numerical features, yet decisive behavioral signals (e.g., a driver's habitual aversion to certain regions) are inherently contextual and naturally expressible as LLM-generated user profiles. However, scaling such profiling to a live, millisecond-latency dispatcher faces three intertwined constraints rarely addressed together: on a platform with millions of daily orders, logs exceed any LLM's context window by orders of magnitude; most users are long-tail, with too few interactions for per-user profiling; and surface-fluent profiles do not necessarily improve downstream prediction utility. We present ProfiLLM, an agentic LLM data pipeline that operationalizes utility-aligned user profiling for production matching systems through two modules. (1) Tool-Augmented Global Knowledge Mining equips an LLM agent with 27 analytical tools to mine platform-scale data, producing reusable global knowledge, adaptive user clustering rules, and region-level supply-demand priors. (2) Utility-Aligned Profile Exploration generates multiple candidate profiles per cluster, evaluates them via a lightweight downstream utility proxy, iteratively refines the best candidates and constructs preference pairs for DPO fine-tuning. Deployed on DiDi's production dispatcher, ProfiLLM achieves up to +6.14% relative AUC improvement in outcome prediction, up to +4.35% GMV gain in dispatching simulation, and consistent improvements in a 14-day online A/B test including +0.47% GMV, +0.33% Completion Rate, and -0.82% Cancel-Before-Accept rate.

Read & Discuss → View Source →

12.

arXiv (CS.AI) 2026-06-17 DOI: arXiv:2606.17577

Surrogate Assisted Pedestrian Protection Design via a Foundation Model Orchestrated Workflow

Authors:

Osamu Ito ↗Akihiko Katagiri ↗Yoshikazu Nakagawa ↗Shin Saeki ↗Jun Shiraishi ↗Masato Sasaki ↗

arXiv:2606.17577v1 Announce Type: new Abstract: AI-driven engineering workflows face particular challenges in crash safety design: unlike aerodynamics, crash events involve highly nonlinear contact dynamics, material nonlinearity, and discrete state transitions that are difficult to capture with data-driven surrogate models. To the best of our knowledge, we present the first foundation model–orchestrated workflow for crash safety design that enables surrogate-assisted exploration for pedestrian protection, reducing evaluation time from hours per CAE simulation to seconds. The workflow integrates four components: (1) a surrogate trained on CAE crash simulations to predict pedestrian leg injury metrics from design parameters, achieving an average $R^2=0.87$ and providing distribution-free conformal prediction intervals; (2) multiobjective evolutionary search (NSGA-II) to discover diverse feasible parameter sets under user-specified constraints; (3) a morphing-based geometry generator that maps parameters to topology-preserving 3D shapes; and (4) a natural-language interface in which an LLM orchestrates the workflow and a vision–language model supports semantic comparison of generated designs. In an automotive front-bumper case study, the workflow produces 35 distinct safety-compliant alternatives from a single exploration, a process that would require weeks with conventional CAE iteration. These results suggest that foundation models can serve as integration layers between ML surrogates and physics-based simulation, helping bring AI capabilities to safety-critical engineering domains.

Read & Discuss → View Source →

13.

arXiv (CS.CL) 2026-06-11 DOI: arXiv:2606.11562

GraphInfer-Bench: Benchmarking LLM's Inference Capability on Graphs

Authors:

Zhuoyi Peng ↗Jingzhou Jiang ↗Hanlin Gu ↗Lixin Fan ↗Yi Yang ↗

Graph analysis underlies many applications whose answers cannot be looked up in a single record or retrieved along a path: laundering rings, drug repurposing, user preference, and scientific theme are all inferred from a node together with its neighbourhood. We introduce GraphInfer-Bench, a benchmark for whether LLMs can perform this graph inference: producing an open-ended answer that no single node supports and no path retrieves. Existing graph-QA protocols cannot test this capability: algorithm simulation, node classification, single-node description, KG-QA, and GraphRAG all admit answers retrievable from one node or along a path. GraphInfer-Bench defines five tasks along Description (what a region is) and Comparison (how regions differ), each constructed so the ground truth lives in no single node. The release contains 42,000 samples across six real-world graphs, produced automatically and screened by a four-layer quality-control protocol. We evaluate four method families against the same tasks: graph-token alignment models, zero-shot frontier closed-source LLMs, Graph2Text supervised fine-tuning, and plain GNNs as a structural reference. No method family closes the gap. Graph-token alignment partially handles description tasks (relational, theme) but collapses on comparison tasks. Frontier LLMs lead on outlier detection and community partition among LLM-based methods but lag on masked-node prediction. Graph2Text SFT is the strongest LLM-based method on the description side yet falls behind frontier LLMs on comparison. Across every task, plain GNNs match or beat the strongest LLM-based row, with the largest margin on community detection. GraphInfer-Bench surfaces graph inference as an open capability gap rather than a property of any one architecture.

Read & Discuss → View Source →

14.

arXiv (CS.LG) 2026-06-12 DOI: arXiv:2604.12497

Allocating Human Oversight in AI-Enabled Analytics

Authors:

Zikun Ye ↗Jiameng Lyu ↗Rui Tao ↗

arXiv:2604.12497v2 Announce Type: replace Abstract: Organizations increasingly deploy AI as a low-cost prediction layer in customer-facing decision processes, including demand sensing, service-quality monitoring, product testing, and market research, but AI-generated signals are unevenly reliable across tasks, products, and customer segments. Firms therefore still need scarce human validation (labels, audits, survey responses, or follow-up measurements) to anchor AI outputs to ground truth. Because human ground truth is itself noisy, varying across labelers and even across repeated judgments, the firm must collect and average several human labels per task, which makes human validation costly. We study how to allocate a limited human-validation budget across many AI-assisted tasks when reliability is heterogeneous and unknown before deployment. We cast this within tuned prediction-powered inference. Each human label both sharpens the AI-assisted estimate and reveals the task's rectification difficulty, the variance that remains after the AI prediction is optimally used as a control variate. If difficulties were known, the optimal allocation would follow a Neyman square-root rule; because they are unknown, we propose a policy based on upper confidence bounds that learns them online and steers validation toward tasks where AI is least reliable. We prove that the policy's terminal efficiency loss relative to the oracle allocation vanishes as the budget grows. In synthetic experiments and a real digital-twin survey with 68 tasks and over 2000 respondents, it closes most of the gap to the oracle when reliability is heterogeneous, outperforming uniform and epsilon-greedy allocation; on the survey data it also outperforms explore-then-commit pilot designs and cuts uniform's 10–12% gap to 2–6%. The value of AI depends not only on model accuracy but also on the operational policy that targets human oversight where AI errors matter most.

Read & Discuss → View Source →

15.

arXiv (CS.AI) 2026-06-16 DOI: arXiv:2606.14708

PH-KAN: Port-Hamiltonian Kolmogorov-Arnold Network

Authors:

Achraf El Messaoudi ↗Karim Cherifi ↗Yann Le Gorrec ↗Yongxin Wu ↗

arXiv:2606.14708v1 Announce Type: cross Abstract: Data-driven machine learning approaches have become increasingly attractive for nonlinear system identification, but standard models often fail to preserve the underlying physical structure and remain difficult to interpret, especially when no analytical model is available. In this context, port-Hamiltonian (pH) models provide a natural physics-informed representation. However, when these models are parameterized with standard multilayer perceptrons (MLPs), the learned constitutive components often remain poorly interpretable. In this paper, we propose a structure-preserving identification framework for nonlinear port-Hamiltonian systems based on Kolmogorov-Arnold Networks (KANs). The proposed PH-KAN model parameterizes the interconnection matrix, dissipation matrix, Hamiltonian, and input mapping using dedicated KAN blocks, while enforcing the port-Hamiltonian constraints by construction. This yields constitutive representations in which the nonlinear functions defining the identified pH components can be explicitly inspected, leading to a more interpretable model than with standard MLP-based parameterizations.

Read & Discuss → View Source →

16.

arXiv (CS.AI) 2026-06-12 DOI: arXiv:2606.13486

CRAFTIIF: Cross-Resolution Analytic Four-Type Interpretable Isolation Forest for Multivariate Time Series Anomaly Detection

Authors:

William Smits ↗

arXiv:2606.13486v1 Announce Type: cross Abstract: Anomaly detection in multivariate time series is challenged by four structurally distinct anomaly types – point (isolated spikes), distributional (level shifts), temporal (rhythm changes), and collective (inter-sensor correlation breakdowns) – each requiring different feature representations. Most unsupervised methods target only one or two types and provide limited interpretability. We present CRAFTIIF (Cross-Resolution Analytic Four-Type Interpretable Isolation Forest), a fully unsupervised framework targeting all four types without dataset-specific tuning. CRAFTIIF generates K=500 random analytic wavelet feature draws across four families (Morlet, DOG, Haar, Coiflet), each targeting a specific anomaly type, feeding five structured Isolation Forests – one per type plus a meta-IF for compound anomalies. An adaptive Otsu/MAD threshold calibrates detection automatically across anomaly rates from 0.1% to 69.2%. Because each IF is trained exclusively on type-specific features, branch firing provides direct anomaly-type attribution by construction, without post-hoc explanation. Evaluated on all 19 datasets of the mTSBench benchmark (Zhou et al., TMLR 2026), CRAFTIIF achieves mean F1=0.228 (all 19 datasets) and F1=0.322 (13 detectable datasets), ranking first among all 25 evaluated methods on VUS-PR (0.463 vs. previous best 0.329, +40.7%). A diagnostic framework – oracle F1, detectability limits, and branch separation ratios – identifies 6 of 19 datasets as fundamentally undetectable by any unsupervised method. Ablation over 11 conditions confirms adaptive thresholding (+38% F1), four-branch structure (+20%), and meta-IF (+23%) are each essential. Code: https://github.com/smitswil/craftiif

Read & Discuss → View Source →

17.

arXiv (CS.LG) 2026-06-16 DOI: arXiv:2606.15665

Information Gap and Feasibility-Aware Inference in Binomial Logistic Mixtures

Authors:

Yuta Hayashida ↗Shonosuke Sugasawa ↗

arXiv:2606.15665v1 Announce Type: cross Abstract: This paper studies the information gap between mixture detection and label recovery in binomial logistic mixtures. Standard likelihood-based criteria such as the Bayesian information criterion (BIC) can detect the presence of two components, but this does not guarantee that the corresponding labels are recoverable. We show that this gap is intrinsic to binomial logistic mixtures with a fixed number of trials: observed-data evidence for mixture structure and per-observation information for label recovery have different local orders in the component separation, and only the former accumulates with the sample size. As a result, there exists a detectable-but-unrecoverable regime in which BIC selects two components while the posterior labels remain essentially uninformative. To address this issue, we propose two feasibility-aware inference procedures: a recoverability-aware BIC with a posterior-entropy penalty and an entropy-regularized estimator that mitigates the tendency of the maximum likelihood estimator to produce overly separated components and overly concentrated posterior responsibilities. Numerical experiments confirm the predicted gap and demonstrate that the proposed methods avoid misleading component selections and improve the calibration of posterior label probabilities.

Read & Discuss → View Source →

18.

arXiv (CS.LG) 2026-06-16 DOI: arXiv:2606.16768

Taming Curvature: Architecture Warm-Up for Stable Transformer Training

Authors:

Sameera Ramasinghe ↗Ajanthan Thalaiyasingam ↗Hadi Mohaghegh Dolatabadi ↗Chamin Hewa Koneputugodage ↗Gil Avraham ↗Violetta Shevchenko ↗Yan Zuo ↗Karol Pajak ↗Alexander Long ↗

arXiv:2606.16768v1 Announce Type: new Abstract: Training billion-parameter Transformers is often brittle, with transient loss spikes and divergence that waste compute. Even though the recently developed Edge of Stability (EoS) theory provides a powerful tool to understand and control the stability of optimization methods via the (preconditioned) curvature, these curvature-controlling methods are not popular in large-scale Transformer training due to the complexity of curvature estimation. To this end, we first introduce a fast online estimator of the largest (preconditioned) Hessian eigenvalue (i.e., curvature) based on a warm-started variant for power iteration with Hessian-vector products. We show theoretically, and verify empirically, that the proposed method makes per-iteration curvature tracking feasible at billion parameter scale while being more accurate. Using this tool, we find that training instabilities coincide with surges in preconditioned curvature and that curvature grows with depth. Motivated by these observations, we propose architecture warm-up: progressively growing network depth to carefully control the preconditioned Hessian and stabilize training. Experiments on large Transformers validate that our approach enables efficient curvature tracking and reduces instabilities compared to existing state-of-the-art stabilization techniques without slowing down convergence.

Read & Discuss → View Source →

19.

arXiv (CS.LG) 2026-06-17 DOI: arXiv:2602.23116

Provably Efficient Regularized Online RLHF with Generalized Bilinear Preferences

Authors:

Junghyun Lee ↗Minju Hong ↗Kwang-Sung Jun ↗Chulhee Yun ↗Se-Young Yun ↗

arXiv:2602.23116v3 Announce Type: replace Abstract: We consider the problem of regularized best-response max-regret minimization in online RLHF under general preferences and bandit feedback. While various regularizers are utilized to robustify alignment, known polylogarithmic regret guarantees remain heavily specific to KL. To investigate whether such fast rates extend beyond KL, we adopt the Generalized Bilinear Preference Model (GBPM) – capturing intransitive preferences over $d$-dimensional item-wise features via a rank-$2r$ skew-symmetric matrix – to isolate the impact of generic regularization. Crucially, under GBPM, we prove that the dual gap of any greedy policy is bounded by the squared estimation error, derived using only strong convexity and skew-symmetry. Under a feature coverage assumption, we establish a generic polylogarithmic regret of $\tilde{\mathcal{O}}(\eta d^4 C_{\min}^{-1} (\log T)^2 \wedge d^2 C_{\min}^{-1/2} \sqrt{T})$ with Greedy Sampling, and a dimension-wise improved regret (for well-conditioned arm-sets) of $\tilde{\mathcal{O}}(C_{\min}^{-2} \sqrt{\eta r T} \wedge r^{1/3} C_{\min}^{-4/3} T^{2/3})$ with Explore-Then-Commit, where $\eta^{-1}$ is the regularization coefficient, $T$ is the time horizon, and $C_{\min}$ is an arm-set dependent quantity. This demonstrates that ``fast'' regrets are not KL-specific, but rather a fundamental consequence of generic strongly convex geometry.

Read & Discuss → View Source →

20.

arXiv (CS.AI) 2026-06-19 DOI: arXiv:2606.19893

MetaResearcher: Scaling Deep Research via Self-Reflective Reinforcement Learning in Adversarial Virtual Environments

Authors:

Wei Yu ↗Suxing Liu ↗Minjie Yu ↗Jiahao Wang ↗Zhijian Zheng ↗Haocheng Deng ↗Bing Li ↗

arXiv:2606.19893v1 Announce Type: new Abstract: Deep research agents have demonstrated remarkable capabilities in autonomous information gathering and synthesis, yet their training remains constrained by the static nature of simulated environments, the limits of fact-retrieval-only task designs, and the inefficiency of outcome-based reinforcement learning. In this work, we propose MetaResearcher, a novel framework that scales deep research agent training across four synergistic dimensions. First, we introduce an Evolving Virtual World that injects temporal dynamics and adversarial misinformation into the training environment, forcing agents to develop source credibility assessment and temporal conflict resolution skills. Second, we design Discovery-Oriented Tasks – including hypothesis generation and contradiction resolution – that transcend simple fact retrieval and push agents toward genuine research behaviors. Third, we propose a Self-Reflective Meta-Reward mechanism within the GRPO framework that jointly optimizes for answer correctness, search path efficiency, reflection depth, and tool call diversity, directly addressing the repetitive action loop problem observed in prior work. Fourth, we introduce a Heterogeneous Multi-Agent Swarm architecture comprising specialized Scout, Filter, and Synthesizer models that learn collaborative research strategies through coordinated reinforcement learning. Built upon the LiteResearcher infrastructure, MetaResearcher requires zero marginal API cost for training while targeting substantial improvements in both benchmark performance (GAIA, Xbench-DS) and epistemic robustness under adversarial conditions. We present the complete framework design, training methodology, and planned experimental validation.

Read & Discuss → View Source →

21.

arXiv (CS.CV) 2026-06-11 DOI: arXiv:2606.11287

Intelligent Skin Cancer Detection Using a Multispectral Metasurface and a Hybrid

Authors:

Afsane Saee Arezoomand ↗

Skin cancer is among the most prevalent malignancies worldwiAdbe satnradcitts early detection is essential for improving patient survival and reducing treatment costs Conventional dermoscopic and visual imaging techniques are primarily limited to the visible spectrum and often fail to capture subtle spectral signatures associated with early stage malignancies This study proposes an innovative framework that integrates a multispectral metasurface for imaging with a hybrid deep learning architecture based on Convolutional Neural Networks and Vision Transformers The designed metasurface enables noninvasive acquisition of rich spectral information highly sensitive to tissue alterations while the hybrid CNN ViT model simultaneously extracts local and global features to robustly classify skin lesions Simulation-based evaluations demonstrate that the proposed method achieves approximately 98 accuracy 95 percentages sensitivity and 99 perentage specificity surpassing conventional RGB-based and single-architecture approaches Qualitative analyses using attention maps reveal that the model focuses on clinically relevant lesion regions improving interpretability Overall the results indicate that combining metasurface based multispectral imaging with hybrid deep learning can introduce a new generation of diagnostic tools in dermatology and pave the way for portable fast and highly accurate clinical systems

Read & Discuss → View Source →

22.

arXiv (CS.LG) 2026-06-18 DOI: arXiv:2606.19150

Complementary Attention Head Pruning for Efficient Transformers

Authors:

Yaniv Livertovsky ↗Shahar Somin ↗Gonen Singer ↗

arXiv:2606.19150v1 Announce Type: new Abstract: The remarkable success of Transformer-based models in natural language processing stems from architectural scaling, which leads to a large number of parameters and hinders deployment in resource-constrained environments. While structured pruning offers a pathway to compression, existing state-of-the-art methods often rely on gradient-based importance ranking or stochastic gating, which suffer from instability, structural degeneration, and the need for extensive manual hyperparameter tuning. In this paper, we introduce CAHP (Complementary Attention Head Pruning), a novel post-hoc framework that redefines head selection as a global graph-theoretical problem. Rather than evaluating heads in isolation, CAHP utilizes graph-based clustering combined with information-theoretic distance measures to identify and preserve a topologically diverse subset of complementary attention heads. Without requiring a predefined sparsity level or pruning ratio, the framework automatically determines the number of selected attention heads across layers by identifying a diminishing marginal performance curve, where pruning additional heads leads to a sharp degradation in performance, as determined by the chosen polynomial degree. Extensive evaluations on the SST-5 and MNLI benchmarks, across different Transformer model scales, demonstrate that CAHP consistently outperforms competitive baselines, particularly in high-compression regimes. Furthermore, our structural analysis shows that CAHP avoids the "proximity bias" of gradient-based pruning methods, which tend to preserve heads mainly in layers close to the output, and instead retains a functionally critical set of attention heads in the model's intermediate layers.

Read & Discuss → View Source →

23.

arXiv (math.PR) 2026-06-16 DOI: arXiv:2606.15745

Purely unrectifiable sets, fractal percolation and graphs of functions

Authors:

Zolt\'an Buczolich ↗

arXiv:2606.15745v1 Announce Type: cross Abstract: This paper contains a survey of some of the results of the author related to unrectifiablity and is an extended version of the author's talk given at the Second Winter School Geometric Measure Theory Rectifiability vs. Pure Unrectifiability in Hanghzou, China. These results include irregular/purely unrectifiable $1$-sets on the graphs of continuous functions like the Takagi, the Weierstrass-Cellerier and the typical (in the sense of Baire) continuous function. It is also discussed that there exists $ {\alpha}_{0}\alpha_0$. The background of the $1$-unrectifiability is discussed in more detail.

Read & Discuss → View Source →

24.

arXiv (CS.CV) 2026-06-19 DOI: arXiv:2606.20556

Thinking in Boxes: 3D Editing in Real Images Made Easy

Authors:

Pradhaan S Bhat ↗Naveen Chandra R ↗Rishubh Parihar ↗Vaibhav Vavilala ↗R. Venkatesh Babu ↗D. A. Forsyth ↗Anand Bhattad ↗

Text and 2D-conditioning interfaces provide weak, ambiguous control over spatial transformations in image editing – particularly under large object motions and camera changes. Prior work has used 3D primitives such as boxes, but only as loose conditioning signals indicating approximate object location rather than specifying the transformation. We instead use 3D boxes as structured specifications: the user provides the input and output boxes of the edit, casting editing as a well-posed geometry problem. This ``thinking in boxes'' interface, where each box face is color-coded to convey 3D orientation, gives precise control over translation, rotation, scaling, and viewpoint changes in real images while preserving scene and object identity, and recovering previously unseen object regions. To ground transformations in scene appearance, we introduce a depth-aligned planar floor as a global reference frame, shaded with depth-aware cues. Conditioned on this structure, an image generator produces consistent results under large transformations. Trained in two stages – on synthetic multi-object scenes and a small set of real-world videos from Objectron – the system generalizes to complex, in-the-wild real images. Our method operates directly on real photographs and substantially outperforms recent state-of-the-art methods on large 3D edits.

Read & Discuss → View Source →

25.

arXiv (quant-ph) 2026-06-16 DOI: arXiv:2602.21350

The Inverse Born Rule Equivalence. On the Informational Limits of Real-Valued Amplitude Encodings and the Measurement of Quantum Advantage in Data Embeddings

Authors:

Sebastian Zaj\k{a}c ↗Jacob L. Cybulski ↗Bartosz Dziewit ↗Tomasz Kulpa ↗

arXiv:2602.21350v2 Announce Type: replace Abstract: When does quantum data encoding provide genuine quantum advantage, and when does it merely rephrase a classically solvable problem? We prove an Equivalence Theorem demonstrating that any encoding mapping classical data to real-valued amplitudes, $\vert\psi_c\rangle = \sum_i c_i \vert i\rangle$ with $c_i \in \mathbb{R}$ and $\sum_i c_i^2 = 1$, composed with a data-independent parameterised unitary and computational-basis measurement, yields exactly the class of classical quadratic forms. We identify the geometric mechanism driving this collapse: the restriction to $\mathbb{R}$ forces a vanishing Berry connection, removing the complex phases required for data-dependent quantum interference. To operationalize this boundary, we introduce encoding diagnostics – phase complexity $C[\Phi]$ and mode-wise von Neumann mutual information $I[\Phi]$ – and link them to the information-geometric excess $\Delta g$. We show that for all real-valued encodings, $\Delta g = 0$ identically. We term the misidentification of such models as evidence of quantum computational power the Inverse Born Rule Fallacy. Supported by numerical experiments, our results establish that complex-phase structure is a strictly necessary condition for data-driven (Type~B) quantum advantage.

Read & Discuss → View Source →

Explore the Frontier of Global Academia