Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.LG) 2026-06-19

Efficient Neural Network Model Selection for Few-Class Application Datasets

arXiv:2606.19712v1 Announce Type: new Abstract: While much effort has focused on developing and benchmarking high-performance neural networks, less attention has been given to how dataset properties, known to practitioners, can guide efficient model selection. Neural models are typically evaluated on datasets with thousands of classes, yet many real-world applications involve fewer than ten. To address this understudied but common setting, we develop a measure of classification difficulty based on data-side properties and show how it enables more efficient model selection for few-class datasets, where traditional approaches are less effective. We term this phenomenon "few-class distinctiveness". Our metric allows comparison of models and datasets 6 to 29$\times$ faster than repeated training and testing. Leveraging this insight, we extend scaled model families below the smallest published models, achieving greater efficiency at similar accuracy, for example models up to 42% smaller than YOLOv5-nano for a mobile robot task. Targeting resource-constrained applications, we demonstrate few-class model selection across mobile robot, drone, and IoT scenarios, highlighting practical gains in efficiency without sacrificing performance.

02.
arXiv (CS.CV) 2026-06-15

HiLo-Token: Input-Adaptive High-Low Frequency Token Compression for Efficient Image Editing

Creative image editing tools, such as Photoshop's Remove or Generative Fill buttons, are central to everyday customer use and account for a major share of traffic in Photoshop and Lightroom. However, current generative AI models face significant latency challenges, which become even more pronounced when transitioning from convolution-based U-Nets to Diffusion Transformers (DiTs). In our evaluation on hundreds of representative image editing samples spanning a wide range of mask ratios, the DiT module alone accounts for an average of 73% of the total model latency, even after being distilled from 50 timesteps down to 8 timesteps. To tackle this challenge, we propose $HiLo-Token$, an input-adaptive token compression framework that allocates more token budget to high-frequency, rich-context regions while assigning fewer tokens to low-frequency areas. Specifically, for the editing region specified by the user mask, we retain all tokens within a dilated mask to preserve strong locality and contextual relevance. Outside the editing region, we introduce a simple yet effective high-frequency token selection strategy based on spatial frequency to capture important local details, while using tokens from a 16x downsampled image to represent low-frequency components and preserve the blurry but global structure. Extensive experiments on production-level evaluation data validate the effectiveness of the proposed method, achieving 3.13x, 2.59x, and 1.67x DiT speedups on A100-80GB for image editing tasks across small, medium, and large mask ratio categories with average ratios of 6.38%, 15.92%, and 35.36%, respectively, without any regression in generation quality.

03.
arXiv (CS.AI) 2026-06-18

Target-confidence Recourse Using tSeTlin machines: TRUST

arXiv:2606.18832v1 Announce Type: cross Abstract: Counterfactual explanations are widely used to provide algorithmic recourse in high-stakes decision-making systems. Most existing methods seek the smallest change to an input that flips a model's decision. However, decision-makers often rely not only on predicted labels but also on confidence thresholds and risk margins. Counterfactuals that barely cross a decision boundary can be fragile and unstable under noise or model variation. In this paper, we propose Target-confidence Recourse Using tSeTlin machines (TRUST), a framework in which users explicitly specify the desired prediction confidence for recourse. Rather than generating counterfactuals and evaluating confidence afterward, TRUST directly searches for minimal changes that satisfy a user-defined confidence target, enabling comparison of recourse options in terms of cost, confidence, and robustness. We instantiate TRUST using a Probabilistic Tsetlin Machine (PTM) combined with Bayesian optimization. The probabilistic clause-based structure of PTM links prediction confidence to the stability of decision rules. We show that counterfactuals satisfying the same rules can still differ substantially in reliability depending on how securely they satisfy those rules, revealing whether decisions are supported by robust or fragile clause activations. Experiments on synthetic and real-world datasets demonstrate that target-confidence counterfactuals produce more robust and interpretable recourse than conventional boundary-based approaches. Across multiple benchmarks, TRUST achieves perfect robustness while maintaining low recourse cost, including an L2 distance of 0.10 on the Haberman dataset at 0.92 confidence. By explicitly controlling confidence and exposing rule-level stability, TRUST provides actionable recourse for high-stakes decision support.

04.
arXiv (CS.AI) 2026-06-12

Modern analog computing for solving differential and matrix equations

arXiv:2606.13179v1 Announce Type: cross Abstract: In recent years, driven by the computational demands of data-intensive applications such as artificial intelligence and scientific computing, analog computing has gained renewed interest. Given the diversity of computational tasks and recent advancements in analog CMOS circuits and resistive memory technologies, we refer to the evolving landscape as modern analog computing. In this context, we identify three core computational primitives: solving differential equations, solving matrix equations, and performing matrix-vector multiplications, and we explore the connections among them. We also examine various hardware implementations of these analog computing operators, including those built with discrete components, integrated circuits, and resistive memory devices. Among these, resistive memory arrays emerge as particularly promising due to their implementation efficiency. The paper then surveys recent progress in leveraging modern analog computing to solve differential and matrix equations using both advanced analog CMOS circuits and resistive memory arrays. Finally, we discuss the applications of these circuits, the precision and scalability issues and their potential solutions, the relationship with in-memory computing, and the unique computational complexity of analog computing. This paper provides a unified perspective on analog computing, highlighting its strengths, current developments, and challenges, and positioning it as a pivotal enabler of next-generation computational frontiers.

05.
arXiv (CS.CV) 2026-06-12

V-JEPA 2.1: Unlocking Dense Features in Video Self-Supervised Learning

We present V-JEPA 2.1, a family of self-supervised models that learn dense, high-quality visual representations for both images and videos while retaining strong global scene understanding. The approach combines four key components. First, a dense predictive loss uses a masking-based objective in which both visible and masked tokens contribute to the training signal, encouraging explicit spatial and temporal grounding. Second, deep self-supervision applies the self-supervised objective hierarchically across multiple intermediate encoder layers to improve representation quality. Third, multi-modal tokenizers enable unified training across images and videos. Finally, the model benefits from effective scaling in both model capacity and training data. Together, these design choices produce representations that are spatially structured, semantically coherent, and temporally consistent. Empirically, V-JEPA 2.1 achieves state-of-the-art performance on several challenging benchmarks, including 7.71 mAP on Ego4D for short-term object-interaction anticipation and 40.8 Recall@5 on EPIC-KITCHENS for high-level action anticipation, as well as a 20-point improvement in real-robot grasping success rate over V-JEPA-2 AC. The model also demonstrates strong performance in robotic navigation (5.687 ATE on TartanDrive), depth estimation (0.307 RMSE on NYUv2 with a linear probe), and global recognition (77.7 on Something-Something-V2). These results show that V-JEPA 2.1 significantly advances the state of the art in dense visual understanding and world modeling.

06.
arXiv (CS.CV) 2026-06-19

Spectral Query-Key Product Weight Steering for Training-Free VLM Hallucination Mitigation

Vision-language models (VLMs) often generate fluent but visually unsupported descriptions, especially by mentioning objects absent from the image. We propose QK Product Steering, a data-free, training-free, and zero-inference-cost weight edit for reducing object hallucination. The method directly edits the per-head query-key product, the operator that produces pre-softmax attention logits, by suppressing a small number of dominant singular modes in selected middle layers. The edited product is then mapped back to the query weights through a closed-form query-only update while keeping shared key weights fixed, making the edit compatible with grouped-query attention. We further decompose the QK product into symmetric and antisymmetric components to distinguish mutual content-similarity patterns from directional attention patterns. Across three GQA-based VLMs, QK Product Steering achieves an average relative CHAIR$_s$ reduction of $4.0\%$, while matched random-mode controls show negligible change. Interpretability ablations show that the hallucination signal is specific to dominant QK modes and is primarily localized to the symmetric mutual-attention channel. Overall, QK Product Steering offers a simple alternative to decoding-time mitigation, requiring no additional data, fine-tuning, or inference-time overhead while largely preserving general multimodal capability.

07.
PLOS Computational Biology 2026-06-03

IsoPepTracker: An interactive web application for peptide-driven isoform analysis

Authors:

by Araf Mahmud, Chen Huang Alternative splicing affects 95% of multi-exon genes, generating protein isoforms with distinct functions. While current alternative splicing analyses effectively identify splice events at the RNA level, they provide limited protein-level insight. To address this gap, we developed IsoPepTracker (https://www.isopeptracker.org), a user-friendly web application for analyzing and visualizing differential peptides across canonical and novel isoforms that are theoretically detectable by shotgun mass spectrometry-based proteomics. IsoPepTracker features four modules: Canonical Isoform Analysis, Novel Isoform Discovery, Peptide Sequence Search, and Alternative Splicing Analysis. Each module is tailored for distinct and complementary proteogenomics analyses. Users can input genes, novel cDNA sequences, peptides, or alternative splicing results to pinpoint peptides of interest and identify their associations with target genes or isoforms. We demonstrate the straightforward application of IsoPepTracker in proteogenomics through case studies. IsoPepTracker not only provides informative peptide signatures to understand the protein-level consequences of alternative splicing but also supplies peptide candidates for validation in shotgun proteomics.

08.
arXiv (CS.LG) 2026-06-17

Rethinking Dataset Distillation for Classification: Do Distilled Sets Outperform Coresets?

arXiv:2606.18209v1 Announce Type: new Abstract: Dataset distillation (DD) has emerged as a prominent approach in data centric machine learning, aiming to synthesize compact training sets for efficient training by compressing the information in large datasets into a small number of synthetic samples. However, DD methods are often evaluated under inconsistent evaluation protocols, ranging from standard ERM to single/multi-teacher supervision, making it difficult to isolate the effectiveness of distilled data from evaluation. Moreover, many prior methods claim that DD outperforms data pruning approaches such as coreset selection (CS), based on the assumption that restricting condensed datasets to subsets of real samples fundamentally limits their expressiveness. In this work, we critically evaluate DD methods through large-scale experiments using standardized datasets and evaluation protocols to assess their intrinsic effectiveness. We benchmark seven state-of-the-art (SOTA) DD methods on ImageNet-1K, ImageNet100, and ImageNette, using three widely adopted training protocols against three CS strategies. Our results show that while some DD methods fail to outperform even simple random subsets, the SOTA DD approaches are comparable to or worse than coresets on large-scale datasets and incur a substantially higher cost for construction. Beyond accuracy, we also evaluate the representativeness, diversity, and quality of condensed sets, and find that coresets consistently achieve better coverage of the original data distribution. These findings highlight the limited practical advantages of current DD methods and show that coresets remain competitive and are often a more computationally efficient alternative for data-centric learning.

09.
arXiv (CS.CV) 2026-06-16

HairLRM: Strand-based Hair Modeling via Large Reconstruction Models

The fundamental limitation of traditional strand-based modeling is not simply data scarcity, but the ill-posedness of inferring complex 3D fields from 2D imagery without structural constraints. This unconstrained regression leads to catastrophic failures in resolving both global occlusion (e.g., in ponytails) and local directionality (e.g., in curls), resulting in over-smoothed, plausible-but-incorrect geometries. To resolve this, we integrate the strong geometric priors of Large Reconstruction Models (LRMs) into the strand generation pipeline. Using the LRM mesh as a structural anchor, we employ a novel Dual Orientation AutoEncoder to lift coarse geometry into high-fidelity strands. By resolving vector field singularities through latent-space optimization and surface-guided refinement, our method effectively disentangles complex topological structures, setting a new benchmark for robustness and accuracy in hair reconstruction.

10.
arXiv (CS.LG) 2026-06-15

A Longitudinal Attribute-Conditioned Neural Network for Modeling Health-State Transition Probabilities in Temporally Irregular Data: The LANTERN Framework

arXiv:2606.13880v1 Announce Type: new Abstract: Accurate estimation of long-term care transition probabilities is central to disability insurance pricing, reserving, and solvency assessment. Classical actuarial multi-state models commonly rely on Markov, semi-Markov, or proportional-hazard specifications, which provide a direct connection to cohort projection but may be restrictive for irregular longitudinal health data with nonlinear aging patterns and heterogeneous covariate histories. This paper develops a well-calibrated estimator of multi-state transition probabilities for irregular longitudinal health data. The model learns from individual health history, incorporates the time elapsed between observations, and conditions transition probabilities on demographic and socioeconomic attributes. It produces a valid probability distribution over the next observed health state, with four possible states: healthy, mild disability, severe disability, and death. Individual probabilities are aggregated by age group and origin state to form transition matrices compatible with actuarial cohort projection. Using longitudinal data from the Health and Retirement Study, we compare the proposed estimator with logistic regression, gradient-boosted trees, a recurrent neural network, and a last-state persistence benchmark. The evaluation considers probabilistic accuracy, endpoint discrimination and calibration for severe disability and death, risk concentration, and transition matrix error after aggregation. The proposed estimator improves severe disability discrimination relative to logistic regression and gradient-boosted tree benchmarks, maintains strong calibration, and yields the lowest transition matrix error among the evaluated models in the held-out test analysis. Results show that a structured machine learning estimator can support long-term care transition modeling when judged by calibration and projection fidelity, beyond discrimination.

11.
arXiv (CS.CV) 2026-06-15

StereoGeo: an end-to-end stereo camera calibration method

In this work, we propose StereoGeo, an end-to-end network-based approach for stereo camera calibration. Our method estimates the focal lengths and gravity directions of the left and right cameras, as well as the relative extrinsic transformation relating them. Existing methods often rely on calibration patterns in structured environments or address only a single camera configuration, being limited to either intrinsic or extrinsic estimation, and depending on a multi-view setups. StereoGeo extends the GeoCalib algorithm, integrating deep neural network feature extraction with a differentiable optimizer. Extensive experiments on real-world benchmarks demonstrate that StereoGeo achieves competitive performance for intrinsic calibration and provides accurate stereo extrinsic estimation, outperforming existing methods that are limited to monocular settings. The dataset used in this work is partially publicly available at https://github.com/meddourimane/StereoGeo-dataset.

12.
medRxiv (Medicine) 2026-06-18

Can Vision-Language Models See the Vital Signs? Benchmarking and Fine-Tuning for Intraoperative Monitor Reading

Background Vital-sign deterioration is a leading contributor to preventable perioperative death, yet manual monitor reading is intermittent, error-prone, and subject to alarm fatigue. Automating this perceptual step could enable continuous surveillance, but existing solutions depend on device-specific hardware integration or cloud-hosted vision-language models (VLMs), which raise privacy, cost, and connectivity barriers in resource-limited healthcare facilities. Methods We constructed a benchmark of 200 in-the-wild intraoperative monitor photographs (spanning multiple vendors, angles, and illumination conditions) annotated for eight vital-sign parameters: heart rate, SpO2, ETCO2, respiratory rate, systolic/diastolic/mean blood pressure, and temperature. We evaluated an optical character recognition (OCR)-based pipeline, nine instruction-tuned VLMs (four commercial, five open-weight ranging from [≤]4B to 31B parameters) under two prompting regimes, and a compact open model (Qwen3.5-9B) adapted via low-rank fine-tuning (LoRA, 0.46% of parameters updated). Results Under a domain-aware prompt, frontier VLMs reached 0.98-0.997 exact-match accuracy zero-shot, whereas the OCR pipeline and [≤]4B model scored approximately 0.20 lower, defining a 9B-class usable floor. LoRA fine-tuning Qwen3.5-9B on 80-120 images raised accuracy from 0.953 to 0.994 (statistically indistinguishable from the best commercial model) and reduced the critical-error rate fivefold (0.0313 [->] 0.0063). Ablations showed that performance saturated at 80 training images and rank-8 adapters. Conclusion Monitor reading is a solved perception problem for VLMs above the 9B scale. A lightweight fine-tuned open model achieves frontier accuracy while running entirely on local hardware, preserving data privacy, offline capability, and near-zero marginal cost. Residual errors stem from blood-pressure source ambiguity and are addressable with explicit disambiguation logic.

13.
arXiv (quant-ph) 2026-06-17

Stochastic signal sensing with finite energy and dead time at the fundamental quantum limit

arXiv:2606.18133v1 Announce Type: new Abstract: State preparation, measurement, and reset operations take finite time and use finite energy in realistic experiments, yet the impact of this on optimal quantum metrological protocols is not properly understood. We study the effect on sensing a stochastic signal, relevant for the detection of ultralight dark matter and other searches for fundamental physics. We prove that two-mode squeezed vacuum is the optimal probe state given a finite mean-energy constraint for a family of incoherent sensing problems, including noise sensing and quantum illumination. For estimating a gain independent of a loss, we show that entanglement is a required resource to achieve the fundamental quantum limit and observe a non-Gaussian to Gaussian transition in the optimal unentangled state as the dead time increases. We apply our results to bulk acoustic wave resonators.

14.
medRxiv (Medicine) 2026-06-10

Development of an Open-Access Action Observation Video Library for Upper Limb Motor Rehabilitation

Background: Occupational therapists can improve stroke survivors hand and arm movement and participation in daily activities through action observation (AO). AO involves watching another persons hand or arm complete a movement or task. While research generally supports the use of AO with stroke survivors, there are limited AO videos are available to occupational therapists which makes applying AO challenging. Objective: The purpose of this work is to develop structured and widely accessible tool to support access to AO for stroke survivors, occupational therapists, and researchers. Methods: To develop an AO video library for stroke rehabilitation, functional and non-functional upper limb task deficits were first identified through clinical observations and clinician interviews to establish a prioritized list of daily activities. In collaboration with media production specialists, healthy adult volunteers were recruited and filmed performing these tasks from both first- and third-person perspectives. The recorded videos were then systematically edited, enhanced with instructional title slides, and distributed via a public YouTube channel for clinical application and a categorized digital repository for research purposes. Results: Initial assessments revealed a complete lack of familiarity, awareness, and utilization of AO resources among local occupational therapists, despite high perceived clinical utility. To address this gap, a final library of 150 tasks was established, resulting in the production of 419 finalized, standardized videos featuring six healthy volunteers. For clinical application, these videos were hosted on a free, public YouTube channel organized into 18 functional playlists, while a parallel set was structured into distinct movement categories for research repository storage. Conclusion: By providing a structured and highly accessible tool, this repository enables clinicians, researchers, and caregivers to readily implement evidence-based action observation interventions in both clinical and home settings.

15.
arXiv (CS.LG) 2026-06-18

UST-GNN: A Unified Spatial–Topological Graph Neural Network Framework for Urban Analytics–Demonstrated through a Case Study on Urban Health Prediction

arXiv:2504.04739v3 Announce Type: replace Abstract: Understanding how social, demographic, environmental, and spatial factors jointly shape urban outcomes is essential for sustainable urban development and evidence-based policy. Traditional statistical approaches often struggle to capture complex non-linear relationships, while many machine learning methods overlook the joint roles of spatial autocorrelation and network topology in urban systems. Recent advances in GeoAI have addressed these challenges only partially, often treating spatial effects, graph structure, evaluation, and interpretability separately. We present UST-GNN, a unified spatial–topological graph neural network framework that integrates neighbourhood connectivity, heterogeneous urban features, and positional/locational embeddings into a single representation. Using the MedSAT dataset, which contains over 150 environmental and socio-demographic variables and six prescription outcomes across 4,835 neighbourhoods in Greater London, UST-GNN outperforms strong statistical, geographically enhanced, and graph Machine Learning baselines, improving out-of-sample $R^2$ by 8.4–13.2\% under strict spatial cross-validation. We further introduce a lightweight principal-component module to interpret learned node embeddings geographically and relate them to policy-relevant covariates. The resulting analyses recover established patterns, offer new perspectives on debated associations, and reveal novel predictors warranting further causal investigation. Together, these findings demonstrate the value of graph-based spatial machine learning for urban health analytics, environmental inequality assessment, and evidence-based urban policy. Beyond predictive gains, UST-GNN provides a unified GeoAI analytical pipeline that can be embedded into urban digital twin workflows for scenario testing, monitoring, and data-informed decision-making for healthier, more sustainable cities.

16.
arXiv (CS.LG) 2026-06-18

PRISM: A 3D Probabilistic Neural Representation for Interpretable Shape Modeling

arXiv:2602.11467v2 Announce Type: replace Abstract: Understanding how anatomical shapes evolve in response to developmental covariates - and quantifying their spatially varying uncertainties - is critical in healthcare research. Existing approaches typically rely on global time-warping formulations that ignore spatially heterogeneous dynamics. We introduce PRISM, a novel framework that bridges implicit neural representations with uncertainty-aware statistical shape analysis. PRISM models the conditional distribution of shapes given covariates, providing spatially continuous estimates of both the population mean and covariate-dependent uncertainty at arbitrary locations. A key theoretical contribution is a closed-form Fisher Information metric that enables efficient, analytically tractable local temporal uncertainty quantification via automatic differentiation. Experiments on three synthetic datasets and one clinical dataset demonstrate PRISM's strong performance across diverse tasks - from modeling shape evolution to personalized shape prediction and anomaly detection - within a unified framework, while providing interpretable and clinically meaningful uncertainty estimates.

18.
arXiv (CS.AI) 2026-06-19

DataMagic: Transforming Tabular Data into Data Insight Video

arXiv:2606.20388v1 Announce Type: cross Abstract: Data videos integrate dynamic charts, voice narration, and synchronized animations to communicate data insights as temporal narratives, making them an effective medium for improving data consumption efficiency in the data management lifecycle. However, producing high-quality data videos requires expertise spanning data analysis, narrative design, and video production. Existing approaches fall short: static visualization tools (e.g., BI dashboards) lack narrative logic and animation; authoring tools require users to pre-prepare visualizations rather than working from raw data; pixel-level video generation models cannot guarantee data fidelity or provenance. We demonstrate DataMagic, an end-to-end interactive system that transforms raw tabular data and natural language queries into narrative data-insight videos. To ensure data fidelity, DataMagic introduces the declarative specification DVSpec, which binds visual and animation elements to underlying data fields through data-driven semantic references. To address the combinatorial explosion of the design space, DataMagic adopts a Generate-then-Orchestrate multi-agent architecture that generates candidate scenes in parallel and then optimizes narrative coherence through global orchestration. Leveraging DVSpec's decoupling of logic and rendering, the system further supports three interaction modes and structured provenance-based data Q&A, transforming one-way videos into explorable interactive data interfaces. Evaluation on 109 real-world samples validates the effectiveness of the DataMagic. Homepage: https://datamagic-home.github.io/

19.
arXiv (math.PR) 2026-06-18

A scaling limit theorem for controlled branching processes with a size-divisible term

arXiv:2508.17116v2 Announce Type: replace Abstract: This paper establishes general sufficient conditions for a sequence of controlled branching processes to converge weakly on the Skorokhod space. We focus on a class of control mechanisms that extend previous results by decomposing those random variables into the sum of two independent components: an immigration term, which depends on the current population size, and a size-divisible term, which can be expressed as the sum of random contributions from each individual. This extension allows us to capture a broad range of control functions including Poisson, binomial, and negative binomial distributions, commonly used in the literature. The assumptions are formulated in terms of probability generating functions of the offspring and control laws, distinguishing in this latter between the immigration and the size-divisible parts. The limit process is shown to be a continuous-state branching process with dependent immigration. The proof essentially relies on tightness arguments and the identification of a martingale problem. We also identify the special case in which the limit reduces to a classical Feller branching diffusion with immigration.

20.
arXiv (CS.LG) 2026-06-12

GEMSS: A Variational Bayesian Method for Discovering Multiple Sparse Solutions in Classification and Regression Problems

arXiv:2602.08913v2 Announce Type: replace Abstract: High-dimensional, underdetermined and highly correlated systems are common in data science practice, especially when analyzing physical measurements. In such settings, feature selection poses a fundamental challenge because multiple distinct sparse subsets may explain the response equally well. Their identification is crucial not only for predictive modeling but also for generating domain-specific insights into the underlying mechanisms. Yet, conventional methods typically isolate a single solution, obscuring the full spectrum of plausible explanations. This work introduces GEMSS (Gaussian Ensemble for Multiple Sparse Solutions), a variational algorithm designed to simultaneously discover multiple, diverse sparse feature combinations. The method employs a structured spike-and-slab prior for sparsity, a mixture of Gaussians to approximate the intractable multimodal posterior, and a Jaccard-based penalty to further control solution diversity. A single objective function is optimized via stochastic gradient descent. The method is tested on 128 comprehensive experiments by a novel benchmarking framework designed to generate artificial problems with multiple sparse solutions of equal predictive properties. This allows us to measure the retrieval of ground truth features rather than only evaluating predictive performance – characteristics more fitting to our practical needs. A comparative analysis shows that GEMSS consistently outperforms five prominent feature selection methods adapted through the ALFESE framework. Finally, we demonstrate practical usability through 3 challenging real-world datasets from metabolomics and physical chemistry: GEMSS successfully isolates multiple distinct yet quality solutions. GEMSS is available as a PyPI package 'gemss'. The corresponding repository github.com/kat-er-ina/gemss/ includes the full codebase and a free, no-code application GEMSS Explorer.

21.
arXiv (quant-ph) 2026-06-17

Quantum mechanics in configuration space in context

arXiv:2606.17622v1 Announce Type: new Abstract: To enhance the way in which wave-particle duality is implemented in the modelling of quantum mechanical systems, Bukhari et al. [New J. Phys. 27, 084501 (2025)] recently introduced an alternative approach to quantum mechanics, namely quantum mechanics in configuration space. This formalism is based on a physically motivated quantisation of Newtonian mechanics and promotes the classical position-velocity states (x,v) to pairwise distinguishable quantum states. The resulting |x,v> states form the basis of the Hilbert space of individual quantum mechanical particles and evolve along classical trajectories. In this paper, we consider the modelling of a mechanical particle in free space and put quantum mechanics in configuration space into context. It is shown that this formalism increases the continuity between quantum and classical mechanics by avoiding a conceptual inconsistency associated with the definition of momentum in canonical quantisation. In addition, we emphasise that standard quantum mechanics and quantum mechanics in configuration space are based on two distinct formulations of classical mechanics.

22.
arXiv (CS.CV) 2026-06-16

DifferAD-R1: A Difference-Guided IndustrialAnomaly Localization with Multimodal LargeLanguage Models

Industrial anomaly localization aims to accurately identify and localize abnormal regions in industrial products, addressing the critical challenge of detecting unseen defect categories in real-world scenarios. Traditional closed-set methods often suffer from poor cross-scenario generalization, while existingMultimodal Large Language Model (MLLM)-based approachesface two core limitations: they either adopt QA-style paradigmsmisaligned with the practical demands of localization, or relyon standard optimization techniques such as Group RelativePolicy Optimization (GRPO), which fails to deliver effectivelearning signals for subtle defects. To tackle these issues, thispaper proposes DifferAD-R1, an MLLM-augmented reinforcement learning framework tailored for industrial anomaly localization. We design a Difference-Guided dual-image paradigm,which reformulates the localization task as a one-shot difference grounding problem to effectively explore cross-scenarioanomalies. A Dual-Consistency Localization Reward is developedfor hard-to-detect anomalies, enhancing optimization stabilityand robustness. Additionally, we integrate a difficulty-awarestrategy with adaptive reweighting and group-wise resamplingto prioritize learning on challenging instances. To facilitateevaluations in real-world industrial settings, we construct theAD-DualDiff dataset, comprising 13K paired images across 20categories. Experimental results demonstrate that DifferADR1 significantly outperforms existing baselines and achievescompetitive performance compared to large-scale models likeQwen3-VL (235B parameters). Our code is publicly availableat: https://github.com/Rong2026/work-1.

23.
arXiv (CS.LG) 2026-06-15

Identifiable Markov Switching Models with Instantaneous Effects and Exponential Families

arXiv:2606.02231v2 Announce Type: replace-cross Abstract: Temporal systems often exhibit non-stationary behaviour, such as seasonal climate variation or glucose fluctuations in patients with type-1 diabetes. One way to model non-stationarity is through discrete latent regimes, i.e., stationary segments of time. Such systems induce a Markov Switching Model (MSM), a class of Hidden Markov Models with autoregressive dependencies among latent regimes and observed variables. Identifying latent regimes is challenging in the presence of frequent regime switches and nonlinear and non-Gaussian dynamics, particularly when there are instantaneous effects between the variables, e.g., due to slow rates of measurements. In this work, we establish the identifiability of both latent regimes and regime-dependent causal structures under temporal regime dependencies, nonlinear lagged and instantaneous effects, and independent noise from the exponential family. Our identifiability theory subsumes non-temporal mixtures of causal models. Furthermore, we introduce FlowMSM, a regime detection framework that can be paired with any stationary causal discovery method to recover regime-dependent causal structures. Experiments on synthetic benchmarks and a financial economics dataset demonstrate the effectiveness of our approach to detect latent regimes and discover causal structures from non-stationary time series.

24.
bioRxiv (Bioinfo) 2026-06-13

Reinforcement learning-driven unified generative framework for multi-objective RNA codon design

Current RNA codon design methods are limited by inefficient long-sequence processing and poor generalizability, often relying on a decoupled "generate-or-optimize" paradigm. We introduce RNARL, a reinforcement learning-driven framework that unifies sequence generation with multi-objective optimization. RNARL directly learns to generate high-performance sequences, effectively optimizing sequences over 3,900 nucleotides and demonstrating superior performance and universality across six species and five RNA types. RNARL thus establishes an effective and generalizable framework for RNA codon design. Finally, a user-friendly web platform is freely available to facilitate its application for RNA therapeutic design.

25.
bioRxiv (Bioinfo) 2026-06-14

TopoMIL: Topology Improves Multiple Instance Learning in Diagnostic Microscopic Images

Microscopic images of cells and tissues are central to disease diagnosis. In computational pathology, multiple instance learning (MIL) has emerged as a key paradigm for analyzing numerous images within a single patient sample. While the representative distribution of cells in a sample is important for diagnosis, existing MIL frameworks largely overlook it. We introduce TopoMIL, a framework that extracts the representative topological structure of the sample and integrates it into the MIL classifier. Three topological representations are assessed, each with distinct advantages and computational costs. We evaluate TopoMIL on four histopathology and cytomorphology datasets, each presenting unique challenges. Integrating the sample's topological information into MIL enhances classification across average, max, attention-based, and transformer pooling, yielding AUCROC gains of 3.3%, 4.2%, 5.9%, and 0.5%, respectively, with moderate computational cost. Our work underscores the potential of TopoMIL as a scalable extension to existing morphology-based models in computational pathology.