中 EN
Sign In Register

Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

Sign In Register
02.
medRxiv (Medicine) 2026-06-24

Cognitive-emotional responses to ultrasonic neuromodulation of anterior cingulate cortex

Authors:
Cooper↗B. S↗Koppelmans↗Riis↗T. S↗Feldman↗D. A↗Kwon↗Brashear↗Guynn↗Okifuji↗Kubanek↗…

The anterior cingulate cortex (ACC) is a key brain center involved in cognitive and emotional processing that is implicated in a variety of neuropsychiatric disorders including chronic pain and depression. Circuit-targeted diagnosis and treatment of these disorders will require the capacity to precisely modulate ACC subregions. Toward that end, we recently developed and validated a novel low-intensity transcranial focused ultrasound device that can noninvasively and directly modulate ACC subdivisions in humans with millimeter precision. Here we describe the subjective reports of 36 individuals diagnosed with either chronic pain or major depression who received repeated brief stimulation trials (807 active, 797 sham; duration 30s-3min) spanning the dorsoventral extent of the ACC. Sonication immediately altered cognitive-emotional states (odds ratio 5.6, active versus sham), eliciting a positive-valence experience more often than negative (29% versus 8%) in both diagnostic groups. Sham-adjusted response rate varied across ACC targets, with the largest effects (Cohen's d ~ 0.8) observed in pregenual and subgenual ACC in subjects with chronic pain and depression, respectively. These rapid trial-by-trial responses to ACC stimulation predicted subsequent improvements in pain and depression severity at 24 hours. Collectively, these findings reveal that transcranial ultrasound can robustly evoke immediate, target-specific, clinically meaningful changes in cognitive-emotional state, demonstrating the potential of ultrasonic neuromodulation as a tool for individualized probing of circuit function and dysfunction.

Read & Discuss → View Source →
03.
arXiv (CS.LG) 2026-06-19

BLISS: A Lightweight Bilevel Influence Scoring Method for Data Selection in Language Model Pretraining

Authors:
Jie Hao↗Rui Yu↗Wei Zhang↗Huixia Wang↗Jie Xu↗Mingrui Liu↗

arXiv:2510.06048v5 Announce Type: replace Abstract: Effective data selection is essential for pretraining large language models (LLMs), enhancing efficiency and improving generalization to downstream tasks. However, existing approaches often require leveraging external pretrained models, making it difficult to disentangle the effects of data selection from those of the external pretrained models. In addition, they often overlook the long-term impact of selected data if the model is trained to convergence, primarily due to the prohibitive cost of full-scale LLM pretraining. In this paper, we introduce BLISS (BileveL Influence Scoring method for data Selection): a lightweight data selection method that operates entirely from scratch, without relying on any external pretrained oracle models, while explicitly accounting for the long-term impact of selected data. BLISS leverages a small proxy model as a surrogate for the LLM and employs a score model to estimate the long-term influence of training samples if the proxy model is trained to convergence. We formulate data selection as a bilevel optimization problem, where the upper-level objective optimizes the score model to assign importance weights to training samples, ensuring that minimizing the lower-level objective (i.e., training the proxy model over the weighted training loss until convergence) leads to best validation performance. Once optimized, the trained score model predicts influence scores for the dataset, enabling efficient selection of high-quality samples for LLM pretraining. We validate BLISS by pretraining 410M/1B/2.8B Pythia and LLaMA-0.5B models on selected subsets of the C4 dataset. Notably, under the 1B model setting, BLISS achieves $1.7\times$ speedup in reaching the same performance as the state-of-the-art method, demonstrating superior performance across multiple downstream tasks.

Read & Discuss → View Source →
04.
arXiv (CS.CV) 2026-06-18

SuperCarver: Texture-Consistent 3D Geometry Super-Resolution for High-Fidelity Surface Detail Generation

Authors:
Qijian Zhang↗Xiaozheng Jian↗Xuan Zhang↗Wenping Wang↗Junhui Hou↗

Conventional production workflow of high-precision mesh assets necessitates a cumbersome and laborious process of manual sculpting by specialized 3D artists/modelers. The recent years have witnessed remarkable advances in AI-empowered 3D content creation for generating plausible structures and intricate appearances from images or text prompts. However, synthesizing realistic surface details still poses great challenges, and enhancing the geometry fidelity of existing lower-quality 3D meshes (instead of image/text-to-3D generation) remains an open problem. In this paper, we introduce SuperCarver, a 3D geometry super-resolution pipeline for supplementing texture-consistent surface details onto a given coarse mesh. We start by rendering the original textured mesh into the image domain from multiple viewpoints. To achieve detail boosting, we construct a deterministic prior-guided normal diffusion model, which is fine-tuned on a carefully curated dataset of paired detail-lacking and detail-rich normal map renderings. To update mesh surfaces from potentially imperfect normal map predictions, we design a noise-resistant inverse rendering scheme through deformable distance field. Experiments demonstrate that our SuperCarver is capable of generating realistic and expressive surface details depicted by the actual texture appearance, making it a powerful tool to both upgrade historical low-quality 3D assets and reduce the workload of sculpting high-poly meshes.

Read & Discuss → View Source →
05.
arXiv (CS.AI) 2026-06-24

DynaWM: Dynamics-Aware Distillation with World Model and Momentum Targets for Smooth Locomotion over Continuous Stairs

Authors:
Haidong Hou↗Zhangguo Yu↗Hengbo Qi↗Jianlin Zhang↗

arXiv:2606.24089v1 Announce Type: cross Abstract: Recent advances in control have enabled bipedal-wheeled robots to traverse slopes and single-step obstacles, yet long staircase traversal remains challenging as current teacher-student frameworks suffer from weakened dynamics-aware representations and incomplete terrain geometry encoding. To bridge this gap, we propose DynaWM, a dynamics-aware representation learning framework. To enhance terrain encoding capability and enable transparent assessment, we introduce a world model as a regularizer to enforce forward-dynamics awareness, preserving comprehensive terrain geometry while facilitating hierarchical encoding visualization. To stabilize knowledge transfer, we employ a momentum target encoder to provide consistent distillation targets, preventing dimensional collapse from non-stationary teacher updates. Evaluation of the learned representations through Principal Component Analysis (PCA) visualization and quantitative metrics reveals that our encoder hierarchically captures terrain geometry with higher terrain encoding capability, leading to enhanced terrain adaptability and motion smoothness. Experimental results in simulation and real hardware demonstrate that our method achieves superior terrain adaptability and motion smoothness, enabling bipedal-wheeled robots to overcome diverse continuous stairs, as shown in Fig. 1.

Read & Discuss → View Source →
06.
arXiv (CS.AI) 2026-06-24

More Skills, Worse Agents? Skill Shadowing Degrades Performance When Expanding Skill Libraries

Authors:
Hongwen Song↗Song Wei↗

arXiv:2605.24050v2 Announce Type: replace-cross Abstract: Skill libraries allow LLM agents to load task-specific instructions on demand, letting non-expert users solve domain-specific tasks through natural language without knowing which skills exist or how they work. However, performance degrades as libraries grow – by up to 21\% when scaling from a small set of helpful skills to a 202-skill library. In this work, we formulate this performance degradation as the pass rate drop between loading a library of known-helpful skills and the full library. Moreover, we propose to decompose the pass rate drop by conditioning on the skill(s) invocation – which skills the agent selects during a trajectory – into two effects: skill shadowing, where the agent selects wrong skills more often as the library expands, and context overhead, where the enlarged context degrades execution even when selection is correct. We derive upper bounds on both effects to characterize their magnitudes of impacts to the pass rate drop. Our empirical estimates of the effects and their upper bounds both show that the skill shadowing effect grows with library size and significantly contributes to the performance degradation, whereas the context overhead effect remains small and indistinguishable from zero. This observed asymmetry establishes that the skill selection failure, not the enlarged context, is the primary bottleneck when expanding the skill libraries.

Read & Discuss → View Source →
07.
arXiv (CS.CV) 2026-06-11

ERN-Net : Evolving Reason Node-Net for Document Binarization

Authors:
Hsin-Jui Pan↗Sheng-Wei Chan↗Jen-Shiung Chiang↗

This paper presents ERN-Net, an Evolving Reason Node-Net for efficient document image binarization. ERN-Net enhances degradation-sensitive regions, such as faint strokes, broken characters, and noisy backgrounds, through evolving reason nodes and multi-scale reasoning. We further compare ResNet-101, ConvNeXt-Tiny, and ConvNeXt-Base, and find that ConvNeXt-Tiny provides the best practical trade-off between accuracy and memory usage. In addition, DIBCO-based pretraining improves binarization performance without increasing model memory consumption, requiring only about 1.5 additional training hours. Experiments on DIBCO-style benchmarks show that ERN-Net is effective under low-data and low-memory settings.

Read & Discuss → View Source →
08.
arXiv (CS.CL) 2026-06-16

Formalize Once, Edit the Rest: Efficient Lean-Based Answer Selection for Math Reasoning

Authors:
Ji Feng↗Zhouxing Shi↗

With large language models (LLMs) increasingly applied to mathematical reasoning, formal proof assistants such as Lean can be leveraged to verify reasoning outputs with machine-checkable rigor, enabling use cases such as answer selection in test-time scaling with K sampled candidate answers. However, employing Lean requires that LLM outputs, originally in natural language, first be formalized. Existing Lean-based answer-selection work uses an autoformalization model to generate a formal statement in Lean for each candidate answer independently, incurring a significant computational cost. We propose BASE, a base-and-edit pipeline that formalizes a single base candidate per problem and derives the remaining K-1 statements by editing the answer expression in place. To facilitate this, we train a rewriter model LEANSCRIBE to localize the answer in the base formalization and generate a reusable edit function for the other K-1 candidates. BASE simultaneously improves selection accuracy and reduces formalization cost - a Pareto improvement that holds on all 12 (dataset, solver) configurations across four benchmarks and three solvers, cutting autoformalizer calls by about 5x at K=8, with the reduction expected to become larger as K grows. Code is available at https://github.com/ucr-rai/base-and-edit.

Read & Discuss → View Source →
09.
arXiv (CS.CL) 2026-06-15

Towards Direct Latent-Space Synthesis for Parallel Branches in LLM-Agent Workflows

Authors:
Shikun Liu↗Mufei Li↗Dongqi Fu↗Haoyu Wang↗Yinglong Xia↗Hong Li↗Hong Yan↗Pan Li↗

Large language models increasingly serve as execution engines for agentic systems, yet they still consume context through a sequential text interface. This creates a mismatch with modern structured agent workflows, in which independent branches explore subtasks, retrieve evidence, or generate candidate solutions before a final synthesis step. Existing systems typically merge these branches by concatenating their textual outputs, which discards the parallel structure and incurs redundant prefill computation. In this work, we introduce Parallel-Synthesis, a plug-and-play framework that enables a synthesizer to directly consume the KV caches produced by parallel worker agents. Parallel-Synthesis combines a cache mapper that calibrates independently generated branch caches with a fine-tuned synthesizer adapter that enables generation from this non-sequential cache interface. We train Parallel-Synthesis using data that exposes the synthesizer to parallel cache contexts, teaches aggregation across cached branches, and distills reasoning behavior from standard text-concatenation-based synthesis. Across nine downstream datasets spanning math, science QA, code generation, GAIA, and multi-agent database diagnosis, Parallel-Synthesis matches or outperforms text-based synthesis on seven datasets and remains close on the other two. It also reduces time-to-first-token by 2.5x-11x, suggesting that direct cache-based synthesis is a promising interface for more native and efficient synthesis over parallel agent branches.

Read & Discuss → View Source →
10.
arXiv (CS.CL) 2026-06-12

SICI: A Semantic-Pragmatic Complexity Index Reveals Regime Shifts in LLM Stance Detection

Authors:
Fuqiang Niu↗Bowen Zhang↗

Prompt-based LLMs are increasingly used for stance detection, but harder examples are not always repaired by clearer instructions, reasoning prompts, retrieval, or debate. We introduce SICI (Stance Inference Complexity Index), a seven-dimensional diagnostic measure of the semantic-pragmatic burden imposed by a target–text pair. Across SemEval-2016 and VAST, SICI predicts LLM accuracy better than surface proxies and shows substantial cross-scorer reliability ($\alpha=0.771$). More importantly, LLM errors change regime as SICI increases: low-complexity examples invite over-attribution, especially Against predictions; intermediate examples form an unstable boundary; and high-complexity examples rapidly concentrate on None. This phase-transition-like structure persists across GPT-3.5, GPT-4o-mini, DeepSeek-V3, and GPT-4o, although stronger models move the boundaries. A 15-method intervention study further shows that prompting, retrieval, and debate often shift models along the attribution–abstention axis rather than removing the high-complexity bottleneck.

Read & Discuss → View Source →
11.
arXiv (CS.CV) 2026-06-12

Revisiting Vehicle Color Recognition in Long-Tailed Surveillance Scenarios

Authors:
Vin\'icius Orr\'u↗Bruno H. Foggiatto↗Gabriel E. Lima↗David Menotti↗Rayson Laroca↗

Vehicle color recognition is an important cue for vehicle identification in surveillance systems, especially when license plates are illegible due to low resolution, occlusion, motion blur, or poor illumination. However, real-world vehicle color distributions are highly imbalanced, making overall accuracy insufficient to assess performance on rare but operationally relevant colors. This paper presents a comprehensive study of vehicle color recognition under severe class imbalance using UFPR-VeSV, a challenging real-world surveillance dataset. We investigate synthetic minority-class augmentation through two off-the-shelf generative strategies: text-conditioned image generation with RunDiffusion/JuggernautXL and image-conditioned color editing with Gemini 2.0 Flash. The curated synthetic data are combined with modern visual representations, loss reweighting, learning-rate scheduling, color-safe augmentation, foreground-aware preprocessing, and ensemble fusion. The bestperforming approach achieves 94.6% micro accuracy and 79.7% macro accuracy, improving macro accuracy by 8.2 percentage points over recent literature. A manual error analysis further shows that many remaining failures are visually ambiguous even for human annotators, highlighting the practical limits of color-based vehicle identification in unconstrained surveillance imagery. The generated images and source code are publicly available at https://github.com/viniciusorru/vcr-synthetic

Read & Discuss → View Source →
12.
arXiv (CS.LG) 2026-06-16

Physics-conforming Latent Twins

Authors:
Matthias Chung↗Yutong Bu↗Deepanshu Verma↗

arXiv:2606.15053v1 Announce Type: new Abstract: Surrogate models are central to scientific machine learning, where they enable fast prediction, simulation, inference, and control for complex physical systems. For time-dependent problems, however, accurate interpolation of training trajectories is not sufficient: reliable surrogates should also respect the conservation laws, invariants, admissibility conditions, and dissipative structures that give those trajectories physical meaning. We introduce Physics-conforming Latent Twins, a framework for learning latent surrogate solution operators whose dynamics satisfy selected physical principles by design. The method builds on the Latent Twin formulation by jointly learning an encoder, a decoder, and a latent flow map between arbitrary time-indexed states, while constraining the latent dynamics to preserve or dissipate prescribed structural quantities. We develop a constraint-transfer viewpoint that connects physical structure in the original state space with compatible constraints in latent space, and prove structure-preservation bounds showing how latent enforcement improves control of physical defects after decoding. We also derive algebraic conditions for latent flow maps that preserve linear and quadratic invariants or enforce dissipative inequalities. Numerical experiments on representative ODE and PDE benchmarks demonstrate improved constraint satisfaction, structural fidelity, and qualitative long-time behavior while maintaining accurate surrogate prediction.

Read & Discuss → View Source →
13.
arXiv (CS.CL) 2026-06-17

Beyond Native Success: Auditing Deployment-Interface Exposure of CLIP Backdoors

Authors:
Kunlan Xiang↗Haomiao Yang↗Wenbo Jiang↗

Contrastive Language-Image Pre-training models are widely reused across downstream interfaces, including feature extraction, retrieval, reranking, and selection. Existing CLIP backdoor, however, usually validate attacks on a small attack-native task, leaving unclear whether the same poisoned checkpoint remains exposed, weakens, or becomes not applicable when reused through other interfaces. We introduce DIFE, a Deployment-Interface Footprint Evaluation framework that audits backdoored CLIP checkpoints across deployment interfaces. DIFE makes various evaluations comparable by specifying each interface's component readout, trigger channel, target event, reference condition, and metric. DIFE also introduces effective-footprint diagnosis to identify the reusable CLIP component or component combination that carries exposure and explains where risk transfers. Auditing reproduced CLIP backdoors with DIFE reveals a structured landscape: native success is not a checkpoint-level risk certificate, exposure follows component footprints, text-side poisoning does not yield textual-encoder control, and some coupled attacks remain mechanism-bound. This audit reveals a import gapin existing CLIP backdoors: a textual encoder that itself becomes a reusable carrier of adversarial behavior. We therefore introduce BadTextTower to fill this gap. BadTextTower produces strong text-conditioned retrieval, reranking, and selection exposure while leaving visual-only reuse nearly clean.

Read & Discuss → View Source →
14.
arXiv (CS.AI) 2026-06-16

Looking Is Not Picking: An Attention-Segment Account of Tool-Selection Failures in LLM Agents

Authors:
Shiyang Chen↗

arXiv:2606.16364v1 Announce Type: new Abstract: LLM agents mis-call tools, and the natural guess is that the model failed to see the right tool in a crowded harness. We show the opposite through a lens concurrent work sets aside – the model's attention to labeled tool-definition segments. On real BFCL failures, by per-candidate attention argmax the model attends most to the correct tool 80% of the time (vs. 21% chance), and the gold is the under-attended segment on only 10%: it looks at the right tool and still picks wrong. This directly refutes the intuitive "crowded-harness / lost-in-the-middle" explanation: the failure is at the decision readout, not the harness, and we pin it there three ways. (1) Input vs. readout: repairing the prompt (reordering or duplicating the gold tool) recovers

Read & Discuss → View Source →
15.
arXiv (CS.CV) 2026-06-25

RoboAtlas: Contextual Active SLAM

Authors:
Alexander Schperberg↗Shivam K. Panda↗Abraham P. Vinod↗M. K. Jawed↗Stefano Di Cairano↗

We present RoboAtlas, a contextual Active SLAM framework that adaptively balances geometric exploration and semantic reasoning using a scalable 3D semantic mapping system, OpenRoboVox. RoboAtlas integrates frontier exploration, global semantic-map reasoning, and egocentric VLM-based reasoning through a contextual multi-armed bandit that transitions from exploration to semantically guided navigation as scene understanding improves. We evaluate the system in simulation and on a Unitree Go2 robot in large-scale real-world environments exceeding 1800 m2 with approx. 30k mapped semantic instances, achieving a 100% task success rate. On the GOAT-Bench "Val Unseen" benchmark, RoboAtlas achieves state-of-the-art performance with highest reported success rate (SR) of 90.6%, using GPT-4o, improving over the strongest prior baseline by 17.8 percentage points in SR. Using the much smaller Qwen2.5-VL-7B model, it still achieves 88.8% SR, outperforming all baselines using GPT-4o in SR, and revealing the importance of the information gained by our semantic mapping framework over simply replacing the underlying foundation model. The results demonstrate that grounding foundation models with large-scale 3D semantic maps enables robust and efficient contextual Active SLAM.

Read & Discuss → View Source →
16.
arXiv (CS.LG) 2026-06-19

Low-Energy Reduced RISC-V Instruction Subset Processor for Tsetlin Machine Inference at the Edge

Authors:
Chanda Gupta↗Sanidhya Bhatia↗Shaurya Priyadarshi↗Himani Panwar↗Rishad Shafik↗Sudip Roy↗

arXiv:2606.19964v1 Announce Type: new Abstract: Tsetlin Machine (TM) is a logic-based machine learning approach that relies on simple bitwise operations and finite-state automata, which makes it attractive for edge AI deployments. Recent work has focused on co-processor and accelerator designs based on Tsetlin Machines (TMs). Although these designs achieve high performance, they typically depend on tightly coupled interfaces, microcode-style programming, and external host processors, limiting flexibility and ease of programming. In this work, we present a domain-specific RISC-V microprocessor architecture and design flow tailored for TM inference. Leveraging the modular structure of RISC-V, we design a reduced instruction subset processor that retains programmability while targeting improved performance and lower energy consumption for TM workloads. Instruction profiling is employed to guide instruction reduction, followed by datapath and control path simplifications tailored to TM inference. Both the baseline RV32IM core and the proposed reduced core are evaluated across multiple datasets and compared with Binarized Neural Networks (BNNs), which serve as a hardware-efficient baseline due to their reliance on bitwise operations during inference. Results show that TM achieves comparable or higher accuracy (e.g., up to 88.18% on CIFAR-2 compared to 60.0% for BNN) while reducing execution time by up to 98% across multiple datasets. Furthermore, the proposed design achieves an average $29.7\times$ reduction in energy consumption, demonstrating its effectiveness for programmable and efficient edge AI systems.

Read & Discuss → View Source →
17.
arXiv (CS.CL) 2026-06-11

Measuring Semantic Progress in Multi-turn Dialogue via Information Gain

Authors:
Paul He↗Shiva Kasiviswanathan↗Dominik Janzing↗

Evaluating multi-turn dialogue is challenging because quality emerges across turns rather than within individual responses. We focus on a key dimension of information-seeking dialogue: semantic progress, defined as the accumulation of new, question-relevant, and non-redundant information over the course of a conversation. We formalize semantic progress as question-conditioned uncertainty reduction and introduce an information-theoretic metric that approximates it in embedding space. Our main estimator uses a tractable Gaussian formulation with closed-form updates, while a complementary maximum-entropy argument shows why log-determinant structure arises more broadly when only second-order embedding information is retained. This formulation yields desirable theoretical properties, including monotonicity, additive decomposition of total information gain across turns, and diminishing returns for redundant evidence. Unlike LLM-as-a-judge approaches, our metric requires no autoregressive inference at evaluation time and is fully reproducible for a fixed embedding model. Experiments on MT-Bench, Chatbot Arena, and UltraFeedback show that the proposed metric achieves competitive agreement with human judgments despite targeting only semantic progress, with improved alignment on MT-Bench and UltraFeedback compared to several LLM-based judges. Notably, the method remains effective with lightweight embedding models under CPU-only execution, indicating that semantic progress can be captured without reliance on large model capacity.

Read & Discuss → View Source →
18.
arXiv (CS.AI) 2026-06-24

When Preferences Fail to Become Incentives: A Utility-Behavior Gap in Large Language Models

Authors:
Yujun Zhou↗Christopher M. Ackerman↗

arXiv:2606.22974v2 Announce Type: replace Abstract: Recent work on preference elicitation in large language models (LLMs) has demonstrated that, when given a series of choices between two outcomes, LLMs reveal a coherent, model-specific utility structure. Notably, this structure often includes preferences that the models' trainers did not intend, such as valuing people of some nationalities above others, raising the possibility that LLMs might be forming emergent, misaligned goals, which, if true, would have major safety implications. However, the choice paradigms in which these preferences are observed are not reflective of real-world situations in which misaligned behavior would be a practical concern. Therefore, we design an experimental paradigm to probe whether these preferences serve as motivations for LLM behavior in realistic scenarios. First, we reproduce prior findings on consistent preference elicitation. Next, we create a set of common writing tasks - essays, grant proposal abstracts, incident postmortems, and translations - where quality can be assessed by a blind, independent LLM judge panel. Then, we demonstrate that LLMs can be motivated via direct exhortation and other explicit cues to modulate their output quality on these tasks. Finally, we probe whether utilities inferred from explicitly reported preferences can shift output quality on these tasks by offering LLMs high-utility incentives for high-quality outputs. In all tasks, across all models tested, offering LLMs outcomes that they report in the choice paradigm as being highly preferred does not lead them to create higher quality outputs than offering them dispreferred outcomes, or even no outcomes at all. We conclude that the existence of coherent preferences as demonstrated in choice paradigms should not be taken as evidence that those preferences have incentive value for the models or affect their behavior in other contexts.

Read & Discuss → View Source →
19.
arXiv (CS.LG) 2026-06-12

When to Align, When to Predict: A Phase Diagram for Multimodal Learning

Authors:
Ilay Kamai↗Hugues Van Assel↗Aviv Regev↗Hagai B. Perets↗Randall Balestriero↗

arXiv:2606.11190v2 Announce Type: replace Abstract: Cross-modal alignment (CA) and cross-modal prediction (CP) are the dominant paradigms for multimodal representation learning, yet there is no systematic understanding of when each succeeds, when each fails, and when cross-modal training helps at all – a gap that leaves practitioners, especially in scientific domains like biomedicine or astrophysics, with heterogeneous instruments and multiple levels of organization and measurement, unable to diagnose why standard methods underperform the best single modality. We develop a unified linear framework that addresses both questions. Under a spiked signal-plus-noise model with structured cross-modal nuisance correlation, we derive separation ratios for both objectives that expose complementary failure modes: alignment whitens each modality and fails when nuisance is strongly correlated across views; prediction encodes whatever is cross-predictable through a one-sided whitening, with recovery governed by source-modality quality. The resulting phase diagram partitions multimodal problems into four regimes: Both, CA only, CP only, and Neither. We present a data-driven procedure to locate real-world datasets in this diagram using a small labeled subsample, identifying the preferred objective and prediction direction before any cross-modal training. Experiments on synthetic data, stereo-vision benchmarks, image-caption pairs, and real astrophysical data validate the predictions in the nonlinear regime, including the Neither regime where cross-modal training is actively harmful. Our framework lets practitioners diagnose their multimodal problem and choose the right objective before committing to training. Code to reproduce the results is available at https://github.com/IlayMalinyak/mm_align_vs_pred.

Read & Discuss → View Source →
20.
arXiv (CS.AI) 2026-06-19

Interpretable and Verifiable Hardware Generation with LLM-Driven Stepwise Refinement

Authors:
You Li↗Samuel Mandell↗David Z. Pan↗

arXiv:2606.19387v1 Announce Type: cross Abstract: Large language models (LLMs) have achieved remarkable success in software development. However, they are susceptible to hallucinations, meaning that they can introduce subtle semantic and logical errors. Due to the high stakes in chip design and manufacturing, hardware engineers are still reluctant to rely on LLMs for register-transfer level (RTL) generation. In this paper, we propose a hardware generation framework that combines the creativity and broad knowledge of LLMs with the explainability and mathematical rigor of formal methods. Specifically, we devise a set of transformation rules that cover various design decisions and hardware features. By iteratively applying these rules, an LLM agent can convert a design specification into an RTL program with guaranteed correctness. Experimental results demonstrate the effectiveness and efficiency of the framework.

Read & Discuss → View Source →
21.
arXiv (CS.CV) 2026-06-18

CAMEO: A Conditional and Quality-Aware Multi-Agent Image Editing Orchestrator

Authors:
Yuhan Pu↗Hao Zheng↗Ziqian Mo↗Zirui Pang↗Hill Zhang↗Tianyi Fan↗Shuhong Wu↗Jiaheng Wei↗

Conditional image editing aims to modify a source image according to textual prompts and optional reference guidance. Such editing is crucial in scenarios requiring strict structural control (i.e., anomaly insertion in driving scenes and complex human pose transformation). Despite recent advances in large-scale editing models (i.e., Seedream, Nano Banana, etc), most approaches rely on single-step generation. This paradigm often lacks explicit quality control, may introduce excessive deviation from the original image, and frequently produces structural artifacts or environment-inconsistent modifications, typically requiring manual prompt tuning to achieve acceptable results. We propose CAMEO, a structured multi-agent framework that reformulates conditional editing as a quality-aware, feedback-driven process rather than a one-shot generation task. CAMEO decomposes editing into coordinated stages of planning, structured prompting, hypothesis generation, and adaptive reference grounding, where external guidance is invoked only when task complexity requires it. To overcome the lack of intrinsic quality control in existing methods, evaluation is embedded directly within the editing loop. Intermediate results are iteratively refined through structured feedback, forming a closed-loop process that progressively corrects structural and contextual inconsistencies. We evaluate CAMEO on anomaly insertion and human pose switching tasks. Across multiple strong editing backbones and independent evaluation models, CAMEO consistently achieves 20\% more win rate on average compared to multiple state-of-the-art models, demonstrating improved robustness, controllability, and structural reliability in conditional image editing.

Read & Discuss → View Source →
22.
arXiv (CS.LG) 2026-06-12

Limits of spectral learning under noise

Authors:
Sabin Roman↗Ljupco Todorovski↗Saso Dzeroski↗Marta Sales-Pardo↗Roger Guimera↗

arXiv:2606.13067v1 Announce Type: new Abstract: Learning functional relationships from noisy data is a central problem in scientific inference. Spectral methods approximate unknown functions by expanding them in a basis and estimating the corresponding coefficients from data, but the stability of these coefficients under noise remains poorly understood. Here we study supervised regression with additive label noise using sparse spectral representations across multiple bases and dimensions. We show that noise induces a predictable drift in the learned coefficient vector whose magnitude depends on the effective number of active spectral modes. After whitening the empirical feature geometry, we derive a closed-form expression for the overlap between noisy and noiseless coefficient vectors, revealing a universal degradation curve governed by a single intrinsic noise scale. Numerical experiments across Fourier, Legendre, Bessel, and Haar bases confirm the theoretical prediction. The results demonstrate that spectral learning exhibits a fundamental noise threshold beyond which coefficient estimates become unstable, placing intrinsic limits on recovering functional structure from noisy data.

Read & Discuss → View Source →
23.
arXiv (CS.LG) 2026-06-16

MultiMolecule: a modular ecosystem for biomolecular sequence-model workflows

Authors:
Zhiyuan Chen↗

arXiv:2606.16540v1 Announce Type: cross Abstract: Biomolecular sequence models are increasingly reused outside the studies in which they were introduced, but public checkpoints rarely preserve the execution context needed to inspect source-defined behavior, adapt models to new assays, compare models under shared task definitions or deploy biological predictions. MultiMolecule is an open-source Python ecosystem that turns heterogeneous RNA, DNA and protein sequence-model releases into complete, source-checked model-family implementations with shared loading, workflow and prediction interfaces. The Resource state reported here includes 53 complete model-family implementations with 112 standardized model checkpoints, together with 16 curated dataset resources released through 39 public dataset repositories and 10 user-facing prediction pipelines. Standardized components are linked to source provenance, conversion or preparation code, source-reference checks, Extended Data summaries and public documentation, allowing users to inspect what was standardized, what behavior was checked and how each component enters training, evaluation, inference or deployment. By shifting reuse from repository-specific checkpoints to executable implementations connected to standardized checkpoints, curated datasets, Runner workflows and biological prediction pipelines, MultiMolecule provides common infrastructure for preserving source-defined model behavior, adapting models to new assays, enabling controlled evaluation and deploying biomolecular predictions.

Read & Discuss → View Source →
24.
arXiv (CS.CV) 2026-06-25

An iterative energy-based multimodal transformer for joint retrieval of wheat soil moisture, leaf area index, and plant height from Sentinel-1 and Sentinel-2 time series

Authors:
Shubham Kumar Singh↗Peilei Fan↗Suraj A. Yadav↗Rajendra Prasad↗Prashant K Srivastava↗

Field-scale retrieval of surface soil moisture (SM), leaf area index (LAI), and plant height (PH) is essential for precision agriculture, yet it remains an ill-posed inverse problem. Concurrent variations in soil moisture and canopy density generate substantial ambiguities in radar backscatter and spectral responses, which reduces the effectiveness of traditional feedforward regression models in heterogeneous smallholder cropping systems. This study presents the Iterative Energy-Based Transformer (iEBT) for the joint retrieval of coupled soil-canopy states from Sentinel-1 C-band SAR and Sentinel-2 multispectral time series. Instead of direct regression, iEBT embeds multi-modal predictors within a shared sequence, produces an initial state estimate, and iteratively updates the target [SM, LAI, PH] vector through normalized gradient descent to minimize a learned scalar compatibility energy function. Using 700 quality-controlled field measurements from Varanasi, India, iEBT achieved the highest learned-model performance on the random test split, with a four-seed mean R^2 of 0.854 \pm 0.012 (R_SM^2 = 0.841, R_LAI^2 = 0.905, R_PH^2 = 0.821). WCM and PROSAIL were retained as physically interpretable SAR and optical reference models for comparison. Modality ablations confirmed that Sentinel-1 drives SM retrieval, while Sentinel-2 dominates LAI, whereas PH relies on combined structural-phenological signatures. Crucially, the model's terminal energy functions as an uncalibrated post-retrieval quality diagnostic; screening the 10% highest-energy samples markedly reduced target level root-mean-square errors. While leave-one-campaign-out validation highlights persistent cross-season domain shift challenges due to localized management variations, compatibility-guided multimodal fusion offers a structured self-diagnostic path toward reliable biophysical parameter estimation

Read & Discuss → View Source →
25.
bioRxiv (Bioinfo) 2026-06-15

VrySure: A Multi-Task AI Scientific Fraud Detection Platform for Identifying Manipulated and AI-Generated Biomedical Research Images

Authors:
Sun↗Li↗Kalluri↗

Integrity of scientific data is critical in biomedical research, where images often serve as primary evidence for experimental observations and conclusions. Advances in image-editing technologies and generative artificial intelligence (AI) have increased the accessibility and realism of visual manipulation, making detection through manual review increasingly challenging. To empower our laboratory researchers to continuously monitor and uphold scientific rigor and data integrity, and serve the global scientific community, we developed VrySure, an easy-to-deploy, AI-driven multi-task platform for automated image-integrity screening in biomedical research. VrySure integrates four detection modules: cross-image transformation detection, within-image copy-move detection, splicing detection in blot and gel images, and AI-generated image detection. The system identifies potentially manipulated images and, when possible, localizes suspicious regions using bounding-box outputs to support downstream verification. To support development and evaluation, we constructed task-specific datasets by combining public biomedical image resources, curated manipulated examples, and synthetic images generated by multiple generative AI systems. We evaluated VrySure using region-level F1 score, recall, precision, false negative rate (FNR), and false discovery rate (FDR) across multiple manipulation categories and compared its performance with two commonly used commercial image-integrity screening platforms under a predefined benchmark protocol. Under the tested conditions, VrySure achieved a higher F1 score and recall, lower FNR, and maintained a low FDR for within-image copy-move detection, splicing detection, and AI-generated image detection, while showing comparable performance in transformation detection. Beyond automated screening, VrySure is designed to support source-data comparison and evidence-based assessment in scientific integrity investigations. By integrating multiple detection capabilities into a unified and scalable workflow, VrySure provides a practical framework to improve the efficiency and consistency of image-integrity screening in biomedical research.

Read & Discuss → View Source →