Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.CV) 2026-06-11

DrivingAgent: Design and Scheduling Agents for Autonomous Driving Systems

Many autonomous driving systems are increasingly incorporating foundation models to improve generalization and handle long-tail scenarios. However, this trend introduces two key challenges: (i) the manual and labor-intensive process of designing and integrating new models, and (ii) the lack of intelligent, dynamic scheduling mechanisms to meet strict real-time constraints. While Large Language Model (LLM)-based agents offer a promising avenue for automation, existing frameworks are ill-suited for autonomous driving. Specifically, they fail to distinguish between the fundamentally different requirements of system design and real-time scheduling, treat modules as opaque black boxes, and are not designed for continuous operation. To address these limitations, we propose DrivingAgent, a novel agent framework tailored to the dual challenges of autonomous driving system design and scheduling. In the design phase, DrivingAgent automates module development by interpreting system architecture, generating code, and validating modules via super-network training. In the scheduling phase, it employs a lightweight LLM trained with reinforcement learning to dynamically orchestrate system modules in real time, supported by a structured memory that integrates long-term storage with timestamped short-term context. Experimental results demonstrate that DrivingAgent achieves a superior speed–accuracy trade-off on both the nuScenes and Bench2Drive benchmarks.

02.
arXiv (CS.LG) 2026-06-18

Data-driven sparse identification of governing PDEs via knockoff filters and multi-criteria trade-offs

arXiv:2605.26631v2 Announce Type: replace-cross Abstract: We propose KO-PDE-IDENT, a data-driven framework for identifying parsimonious partial differential equations (PDEs) with false discovery rate (FDR) control. PDE discovery from noisy observations is often hindered by extreme multicollinearity among candidate terms, which causes typical sparse-regression methods to select spurious terms. To address this problem, KO-PDE-IDENT initially mines a support set of potential candidate terms via model-X knockoff filters with finite-sample FDR control, then refines and ranks the surviving PDE alternatives. The framework integrates three components. First, knockoff feature statistics are constructed by coupling $\ell_{0}$-constrained adaptive best-subset selection with SHapley Additive exPlanations (SHAP), yielding an effective and computationally efficient difference statistic. Second, a recursive feature elimination (RFE) procedure removes terms whose marginal contributions are dispensable and assesses statistical necessity through knockoff-perturbed hypothesis testing. Third, the final model selection is formulated as a multi-criteria decision-making (MCDM) problem, where the optimal governing equation is the alternative that best balances a wide range of criteria such as predictive accuracy, model complexity and coefficient uncertainty. We evaluate KO-PDE-IDENT on five canonical PDEs under severe noise corruption. Empirical results show that our framework can exactly recover the true PDE structure, eliminating false discoveries while retaining all true underlying terms, with low coefficient estimation error.

03.
arXiv (CS.LG) 2026-06-17

Clarify Before You Draw: Proactive Agents for Robust Text-to-CAD Generation

arXiv:2602.03045v2 Announce Type: replace Abstract: Large language models have recently enabled text-to-CAD systems that synthesize parametric CAD programs (e.g., CadQuery) from natural-language prompts. In practice, however, geometric descriptions can be under-specified or internally inconsistent: critical dimensions may be missing and constraints may conflict. However, existing fine-tuned models tend to reactively follow the user instructions and hallucinate dimensions when the text is ambiguous. To address this, we propose a proactive agentic framework for text-to-CadQuery generation, named as ProCAD, that resolves specification issues before code synthesis. Our framework pairs a proactive clarifying agent, which audits the prompt and asks targeted clarification questions only when necessary to produce a self-consistent specification, with a CAD coding agent that translates the specification into an executable CadQuery program. We fine-tune the coding agent based on a curated high-quality text-to-CadQuery dataset and train the clarifying agent via agentic SFT on clarification trajectories. Experiments show that proactive clarification significantly improves robustness to ambiguous prompts while keeping interaction overhead low. ProCAD outperforms frontier closed-source models, including Claude Sonnet 4.5, reducing the mean Chamfer distance by 79.9% and lowering the invalidity ratio from 4.8% to 0.9%. Our code and datasets are made publicly available on https://github.com/BoYuanVisionary/Pro-CAD.

04.
arXiv (CS.AI) 2026-06-24

Breaking the Filter Bubble: A Semantic Pareto-DQN Framework for Multi-Objective Recommendation

arXiv:2606.24042v1 Announce Type: new Abstract: Recommender systems often induce filter bubbles and semantic homogenization by monolithically optimizing for immediate user engagement. Standard single-objective models, including traditional Deep Q-Networks, are ill-equipped to navigate the trade-offs between platform retention and critical societal values like information diversity and provider fairness. To address these limitations, we introduce a multi-objective reinforcement learning framework that formalizes recommendation as a semantic multi-objective Markov decision process. By integrating high-fidelity semantic embeddings with a Pareto-DQN agent, our architecture treats engagement, diversity, and fairness as distinct, non-aggregable reward signals, avoiding the pitfalls of static reward scalarization. Empirical evaluations on the MovieLens small dataset shows that our hypervolume based action selection disrupts the feedback loops responsible for semantic collapse. By sustaining high state-trajectory variance, the Pareto-DQN effectively maps the Pareto frontier, achieving gains in auxiliary societal objectives with only marginal impacts on engagement. This work provides a path toward intrinsically aligned, responsible recommender systems.

05.
arXiv (CS.AI) 2026-06-19

UniMM: A Unified Mixture Model Framework for Multi-Agent Simulation

arXiv:2501.17015v2 Announce Type: replace Abstract: Simulation plays a crucial role in assessing autonomous driving systems, where the generation of realistic multi-agent behaviors is a key aspect. In multi-agent simulation, the primary challenges include behavioral multimodality and closed-loop distributional shifts. In this study, we formulate a unified mixture model (UniMM) framework for generating multimodal agent behaviors, which can cover the mainstream methods including regression-based mixture models and discrete NTP models. Furthermore, we introduce a closed-loop sample generation approach tailored for mixture models to mitigate distributional shifts. Within the UniMM framework, we recognize critical configurations from both the model and data perspectives. We conduct a systematic examination of various model configurations, and comprehensively characterize their effects. Moreover, our investigation into the data configuration highlights the pivotal role of closed-loop samples in achieving realistic simulations. To extend the benefits of closed-loop samples across a broader range of mixture models, we further introduce a temporal disentanglement-and-alignment mechanism to address the shortcut learning and off-policy learning issues. Leveraging insights from our exploration, the distinct variants proposed within the UniMM framework, including discrete, anchor-free, and anchor-based models, all achieve state-of-the-art performance on the WOSAC benchmark.

06.
arXiv (CS.AI) 2026-06-15

Transforming Shape Schemas with Composable Property-Graph Queries (Extended Version)

arXiv:2606.14309v1 Announce Type: cross Abstract: Property graphs may be constrained by schemas that inform both query engines and human users about the shape of valid data, enforcing a contract between data provider and consumer. Composable property-graph queries transform input graphs into output graphs. Then, the question arises of which schema can be expected after one (or several) transformation steps. We investigate how schema constraints can be inferred given an input schema and a transforming query. Specifically, we propose a reasoning procedure that, given an input schema in ProGS and a query in G-CORE infers an output schema. Since graph updates will happen frequently, our inference procedure does not rely on graph instances, such that the computed output schema applies to all graphs originating from any input graph complying with the input schema. Related work has addressed this problem for SPARQL CONSTRUCT queries, encoding it in Description Logics (DLs) so that the output schema is entailed by axioms inferred from input schema and queries. Property graphs and their queries, however, complicate the matter, as property graphs feature label and property annotations as well as first-class edges. Thus, reification has to be used in one way or another, though available DLs lack the means to encode such features directly. We approach this novel challenge via a family of mappings for i) property graphs reified in RDF, aligned with ii) a mapping from ProGS to SHACL and iii) a mapping from G-CORE to SPARQL CONSTRUCT queries. In this manner, schema inference for property graphs becomes manageable, as we break apart the problem through the extra mapping layer and utilize efficient DL reasoners. We develop the metatheory regarding the soundness of inferred schema constraints and the semantic equivalence of mapped schemas and queries.

07.
arXiv (CS.AI) 2026-06-16

Running hardware-aware neural architecture search on embedded devices under 512MB of RAM

arXiv:2606.14824v1 Announce Type: cross Abstract: This document proposes a novel approach to hardware-aware neural architecture search (HW NAS) that considers the resources available on the computing platform running it, enabling its execution on various embedded devices. The presented HW NAS produces tiny convolutional neural networks (CNNs) targeting low-end microcontroller units (MCUs), typically involved in the Internet of Things (IoT) or wearable robotics, opening new use cases. A gateway could run it to tailor CNNs' architecture on the acquired data without using external servers, ensuring privacy. The proposed technique achieves state-of-the-art results in the human-recognition tasks on the Visual Wake Word dataset, a standard TinyML benchmark, on several embedded devices.

08.
arXiv (CS.CV) 2026-06-16

Mask Proposal Voting Based on Geodesic Framework for Robust Image Segmentation

Despite great advances, finding accurate segmentation remains a challenging task, especially in scenarios with cluttered backgrounds, complex intensity variations and topology appearance. Minimal path models have exhibited their strong ability in addressing image segmentation tasks. However, the performance of minimal paths-based segmentation approaches is heavily influenced by model initialization, hence limiting their application scope in practice. In this work, we propose a novel mask proposal voting framework that overcomes the major drawback of classical approaches, allowing robust segmentation even in complicated scenarios. Firstly, we introduce an efficient method for constructing adaptive domain cuts as a constraint for initializing the region-based min-cut evolution, by which diverse and reliable mask proposal candidates can be generated, substantially increasing the possibility of accurately covering the objective region by these proposals. Secondly, we propose a new mask voting scheme to build a voting score map encoding the final segmentation information. In contrast to classical path voting methods, our model allows incorporating priors to assign different importance to each individual mask. As a consequence, the proposed segmentation model is capable of accurately delineating object boundaries under complex scenarios, and is insensitive to initialization. Experiments demonstrate that our method consistently outperforms state-of-the-art minimal path-based approaches in both accuracy and robustness.

09.
arXiv (quant-ph) 2026-06-11

Quantum thermodynamics, quantum correlations and quantum coherence in accelerating Unruh-DeWitt detectors in both steady and dynamical state

arXiv:2512.18123v2 Announce Type: replace Abstract: We investigate the interplay between quantum thermodynamics, quantum correlations, and quantum coherence within the framework of the Unruh-DeWitt (UdW) detector model. By analyzing both the steady and dynamical states of various quantum resources (including steerability, entanglement, quantum discord, and coherence), we study how these resources evolve under Markovian and non-Markovian environments. Furthermore, we investigate the impact of both the Unruh temperature and the energy levels on three key quantum phenomena: thermodynamic evolution, quantum correlations, and quantum coherence, considering different initial state preparations. The hierarchical structure relating quantum correlations and quantum coherence is determined. We further examine the thermodynamic performance of a quantum heat engine, highlighting the influence of memory effects and classical correlations on heat exchange, work extraction, and efficiency. Our results reveal that non-Markovian dynamics can enhance the preservation of quantum correlations and improve the engine's efficiency compared to purely Markovian regime. These findings provide insights into the role of quantum correlations and quantum coherence in quantum thermodynamic processes and open avenues for optimizing quantum devices operating in relativistic or open-system settings.

10.
arXiv (CS.AI) 2026-06-24

Integrated Sensing and Communications for Real-time Avatar Control in XR over 5G

arXiv:2606.23771v1 Announce Type: cross Abstract: Extended Reality (XR) presents a challenging use case for 5G and 6G networks, requiring high data-rates and lowlatency communication to deliver a truly immersive experience. Moreover, in order to seamlessly translate physical actions to the virtual world, accurate gesture recognition and pose estimation are required. Current XR interaction solutions based on handheld controllers and cameras cannot easily capture full-body poses, inhibit the free use of hands, and require good visibility and a clear line of sight. In this work, we propose a multimodal sensing architecture for XR that combines 5G MillimeterWave (mmWave) Integrated sensing and communication (ISAC) and surface electromyography (sEMG) signals. 5G mmWave ISAC cannot only be used to deliver content wirelessly to the Head-mounted display (HMD), but also the same communication signals can be used to derive coarse body-level gestures and poses of the user, to support real-time avatar control. For fine-grained finger-level gestures, our architecture leverages lightweight sEMG sensors that capture forearm muscle activity. To illustrate the need of both modalities, we present evaluations of both sensing technologies. At the body level (5G), our architecture relies on power-per-beam-pair (PPBP), which can be computed from standard beam management or beam sweeping procedures of the 5G NR standard. PPBP-based sensing achieves 82.2$\pm$5.9% average accuracy when evaluated on users not seen during training. For fine-grained finger-level interactions, we show that surface electromyography (sEMG) carries strong discriminative information achieving consistent promising performance across different movement settings. Thus, combining the two modalities enables multi-scale gesture recognition, at the body level via existing 5G signals and finger level via lightweight sEMG sensors, forming a complete XR framework.

11.
arXiv (CS.CL) 2026-06-16

Data-Driven Decoding of Russell's Circumplex Model of Affect

Affective computing increasingly relies on deep learning to represent emotions, yet latent spaces often remain opaque, high-dimensional black boxes. This paper investigates whether Transformers' embeddings recover the geometric regularities of Russell's circumplex model. We unify two complementary experiments testing the hypothesis that, after training models on text and speech, their resulting latent spaces encode a topology consistent with valence-arousal and reproduce human-like neighborhood relations. Specifically, we evaluate deep representations extracted from Transformer-based text (RoBERTa) and speech (wav2vec 2.0) encoders, along with a multimodal Transformer fusion architecture, across naturalistic datasets like MSP-Podcast and controlled LLM-generated stimuli. Our analysis reveals that multimodal fusion of text and audio yields perfect topological alignment with Russell's primary emotion ordering. Furthermore, in a zero-shot setting using generic text embeddings, projected fine-grained emotion terms fall close to their established human-mapped coordinates. Our contribution is a novel, data-driven framework for validating emotion models, demonstrating that Russell's circumplex structure is intrinsically encoded in the embeddings of these modalities rather than being solely an artifact of human labeling, thereby bridging the gap between psychological theory and representation learning.

12.
arXiv (CS.LG) 2026-06-19

Indexed Bellman Information Complexity

Authors:

arXiv:2606.11171v2 Announce Type: replace Abstract: We develop indexed Bellman information complexity, a representation-level theory of interactive decision making centered on information indices and reference histories. The representation strips away problem-specific syntax and retains only the ingredients needed for dynamic programming and information accounting, thereby unifying the earlier framework of indexed algorithmic information ratios (AIR). On the upper-bound side, regret is controlled by Bellman supersolutions or potential identities whose gradient bracket is paid for by indexed information. Upper-confidence-bound (UCB), estimation-to-decision/decision-estimation-coefficient (E2D/DEC), and adaptive-minimax-sampling or exploration-by-optimization (AMS/EBO) methods appear as three relaxations of this same identity. On the lower-bound side, the posterior-reference trajectory supplies both the information telescope and the ghost quantile of small-regret trajectories. The resulting critical radius in the lower bound is an effective-dimension-scale quantity, as in Fano and local-prior-mass lower bounds, rather than the constant radius of a two-point Le Cam argument. The examples show that DEC is best viewed as a one-step relaxation of indexed Bellman information complexity, not as a universally tight conversion mechanism. We illustrate the framework through several applications, with particular emphasis on kernel bandits. In this setting, the active action marginal provides a concrete basis for comparing UCB, E2D, and AMS/EBO.

13.
arXiv (CS.LG) 2026-06-16

Taming Curvature: Architecture Warm-Up for Stable Transformer Training

arXiv:2606.16768v1 Announce Type: new Abstract: Training billion-parameter Transformers is often brittle, with transient loss spikes and divergence that waste compute. Even though the recently developed Edge of Stability (EoS) theory provides a powerful tool to understand and control the stability of optimization methods via the (preconditioned) curvature, these curvature-controlling methods are not popular in large-scale Transformer training due to the complexity of curvature estimation. To this end, we first introduce a fast online estimator of the largest (preconditioned) Hessian eigenvalue (i.e., curvature) based on a warm-started variant for power iteration with Hessian-vector products. We show theoretically, and verify empirically, that the proposed method makes per-iteration curvature tracking feasible at billion parameter scale while being more accurate. Using this tool, we find that training instabilities coincide with surges in preconditioned curvature and that curvature grows with depth. Motivated by these observations, we propose architecture warm-up: progressively growing network depth to carefully control the preconditioned Hessian and stabilize training. Experiments on large Transformers validate that our approach enables efficient curvature tracking and reduces instabilities compared to existing state-of-the-art stabilization techniques without slowing down convergence.

14.
arXiv (quant-ph) 2026-06-16

Improved Cryogenic Photodiode Optical Biasing for Low-Noise and Low-Jitter Superconducting Nanowire Single-Photon Detectors

arXiv:2606.07140v2 Announce Type: replace Abstract: We experimentally demonstrate an improved optical biasing scheme for superconducting nanowire single-photon detectors (SNSPDs), which employs a cryogenic InGaAs-InP photodiode (PD) as a local bias source. It is found that, under illumination from a stable external light source, this PD generates a stable photocurrent in a cryogenic environment (~2.3 K), with fluctuations in the photocurrent primarily attributed to fluctuations in the incident optical power. Furthermore, by screening and effectively blocking stray photons leaking from the PD, which give rise to background dark counts, we have achieved an SNSPD exhibiting an ultra-low intrinsic dark count rate of 1e-4 cps. Utilizing this improved optical biasing technique, our SNSPD achieved performance comparable to that obtained under conventional electrical biasing: a system detection efficiency of 80.7%, a background dark count rate of 32.6 cps, and a minimum timing jitter of 57.5 ps. These results indicate that cryogenic-PD-based optical biasing serves as a viable, low-noise, and low-jitter alternative to traditional electrical biasing. Moreover, this work offers useful design guidance for the future development of PD-based low-noise bias sources and for the construction of all-photonic SNSPD systems tailored for high-precision quantum photonics applications.

15.
arXiv (quant-ph) 2026-06-16

Minimum measurements quantum protocol for band structure calculation

arXiv:2511.04389v2 Announce Type: replace Abstract: Protocols for quantum measurement are an essential part of quantum computing. Measurements are no longer confined to the final step of computation but are increasingly embedded within quantum circuits as integral components of noise-resilient algorithms. However, each observable typically requires a distinct measurement basis, often demanding a different circuit configuration. As the number of such configurations typically grows with the number of qubits, measurements constitute a major bottleneck. Focusing on electronic structure calculations in crystalline systems, we propose a measurement protocol that restricts the required measurement configurations to an absolute minimum of just three, independent of the number of qubits. This makes it one of the few known protocols that do not scale with qubit number. In particular, we derive the measurement protocol from the symmetries of tight-binding (TB) Hamiltonians and implement it within the Orthogonal-Ansatz Variational Quantum Eigensolver (OA-VQE) algorithm. We demonstrate its performance on three systems, namely a two-dimensional CuO$_2$ square lattice (3 qubits), bilayer graphene with hexagonal (Honeycomb) lattice (4 qubits) and three-dimensional diamond lattice (10 qubits). Beyond tight-binding systems, the protocol can be extended to enable efficient initial state preparation for many-body Hamiltonians, such as multi-orbital Hubbard models in a momentum space.

16.
arXiv (CS.LG) 2026-06-12

Is Stochastic Gradient Descent Effective? A PDE Perspective on Machine Learning processes

arXiv:2501.08425v3 Announce Type: replace Abstract: In this paper we analyze the behaviour of the stochastic gradient descent (SGD), a widely used method in supervised learning for optimizing neural network weights via a minimization of non-convex loss functions. Since the pioneering work of E, Li and Tai (2017), the underlying structure of such processes can be understood via parabolic PDEs of Fokker-Planck type, which are at the core of our analysis. Even if Fokker-Planck equations have a long history and a extensive literature, almost nothing is known when the potential is non-convex or when the diffusion matrix is degenerate, and this is the main difficulty that we face in our analysis. We identify two different regimes: in the initial phase of SGD, the loss function drives the weights to concentrate around the nearest local minimum. We refer to this phase as the drift regime and we provide quantitative estimates on this concentration phenomenon. Next, we introduce the diffusion regime, where stochastic fluctuations help the learning process to escape suboptimal local minima. We analyze the Mean Exit Time (MET) and prove upper and lower bounds of the MET. Finally, we address the asymptotic convergence of SGD, for a non-convex cost function and a degenerate diffusion matrix, that do not allow to use the standard approaches, and require new techniques. For this purpose, we exploit two different methods: duality and entropy methods. We provide new results about the dynamics and effectiveness of SGD, offering a deep connection between stochastic optimization and PDE theory, and some answers and insights to basic questions in the Machine Learning processes: How long does SGD take to escape from a bad minimum? Do neural network parameters converge using SGD? How do parameters evolve in the first stage of training with SGD?

17.
arXiv (CS.CV) 2026-06-24

MedP-CLIP: Medical CLIP with Region-Aware Prompt Integration

Contrastive Language-Image Pre-training (CLIP) has demonstrated outstanding performance in global image understanding and zero-shot transfer through large-scale text-image alignment. However, the core of medical image analysis often lies in the fine-grained understanding of specific anatomical structures or lesion regions. Therefore, precisely comprehending region-of-interest (RoI) information provided by medical professionals or perception models becomes crucial. To address this need, we propose MedP-CLIP, a region-aware medical vision-language model (VLM). MedP-CLIP innovatively integrates medical prior knowledge and designs a feature-level region prompt integration mechanism, enabling it to flexibly respond to various prompt forms (e.g., points, bounding boxes, masks) while maintaining global contextual awareness when focusing on local regions. We pre-train the model on a meticulously constructed large-scale dataset (containing over 6.4 million medical images and 97.3 million region-level annotations), equipping it with cross-disease and cross-modality fine-grained spatial semantic understanding capabilities. Experiments demonstrate that MedP-CLIP significantly outperforms baseline methods in various medical tasks, including zero-shot recognition, interactive segmentation, and empowering multimodal large language models. This model provides a scalable, plug-and-play visual backbone for medical AI, combining holistic image understanding with precise regional analysis.

18.
arXiv (CS.CV) 2026-06-16

Disagreement-Based Cross-Model Routing for Implicit Video Question Answering

We study multiple-choice video question answering on the ImplicitQA benchmark, where the correct answer is never explicitly shown but must be inferred from off-screen events, line-of-sight cues, causal structure, and cross-shot spatial layout. On this benchmark a single frontier video LLM already operates near its accuracy ceiling, and we observe that conventional self-consistency strategies – majority voting across repeated samples of the same model – can hurt rather than help, because the model's errors on hard questions are correlated. We propose disagreement-based cross-model routing, a pure inference-time procedure that requires no labels and no training. We triple-sample a native-video model (Gemini 3.1 Pro Preview) at temperature zero, exploit the genuine sample-to-sample variance of its video-processing pipeline to identify the roughly 20% subset of questions where the three samples disagree, and route only that subset to a second model from a different family (Claude Opus 4.8) that consumes uniformly sampled frames with adaptive thinking. On the 1001-question validation set with public ground truth – our main evaluation – the method improves AvgAcc by +1.43 over the best single sample of the primary model, with per-category gains concentrated on Motion & Trajectory (+5.49), Inferred Counting (+3.45), and Vertical Spatial Reasoning (+1.82) – the categories most dependent on cross-shot reference resolution. The same pipeline applied to the held-out 172-question CVPR 2026 ImplicitQA challenge test set achieves 82.03 AvgAcc / 79.71 MacroAvgAcc (+1.81 over the best single sample of the primary model), confirming the validation result on an independent split.

19.
bioRxiv (Bioinfo) 2026-06-16

OmicOS: A Comprehensive Omics Ecosystem Infrastructure and Agent System for the AI Era

Biology has accumulated a vast ecosystem of omics methods, but much of this ecosystem remains built for expert humans rather than scientific agents. Methods are scattered across Python packages, R/Bioconductor and CRAN workflows, command-line tools, incompatible data containers and implicit object states, making even routine analyses difficult for an AI system to choose, execute and verify reliably. Here we introduce OmicOS, a comprehensive omics ecosystem infrastructure and agent system that turns OmicVerse V2, an open-source omics community, into an executable foundation for agentic biology. OmicVerse V2 provides the community substrate: scalable AnnDataOOM-compatible rust backends, agent-friendly Python algorithms for single-cell, spatial, bulk and multi-omics analysis, interfaces to single-cell foundation models, and Python-native reconstructions of historically R-centred Bioconductor/CRAN-style workflows. OmicOS makes this substrate actionable by registering analytical functions as state-aware capability contracts, allowing agents to inspect live data objects, select valid methods, execute controlled workflows and record provenance. The result is not a fixed pipeline, but a programmable omics environment in which agents compose real analyses from verified community methods rather than inventing tools. Across external and purpose-built benchmarks, OmicOS ranked first among the evaluated systems, reaching 81.2% on BiomniBench. Adding OmicVerse to a minimal agent improved task completion by up to 34.2 percentage points with qwen-3.6-35b, and controlled ablations showed that the gains came from registry-grounded execution rather than from larger models, documentation retrieval or unrestricted tool exposure. The same infrastructure scaled to atlas-sized data, reproduced R-centred workflows in Python and converted external pathology software into agent-usable skills. In a discovery task starting from a whole-body spatial map and the term Alzheimer disease, OmicOS composed a non-canonical workflow that integrated spatial expression, genetic association, eQTL and colocalization evidence to nominate a colon epithelial risk axis centred on PICALM, CD2AP and CR1. Together, OmicVerse and OmicOS define an open foundation for AI-era omics, showing how a community of biological methods can be transformed into a reliable, extensible and agent-operable system for discovery.

20.
arXiv (CS.AI) 2026-06-19

CareTransition-Audit: A Benchmark to Audit Discharge Summaries for Efficient Care Transitions

arXiv:2604.05435v2 Announce Type: replace Abstract: Incomplete or inconsistent discharge documentation drives care fragmentation and avoidable readmissions. Despite its critical role in patient safety, auditing discharge summaries relies on manual review and does not scale. We propose an automated framework for auditing discharge summaries using large language models (LLMs). Our approach operationalizes the DISCHARGED framework into a checklist of 46 questions. Using 50 summaries from the MIMIC-IV database, with clinician ground-truth labels, we benchmark 11 LLMs. Model-assessed mean documentation completeness ranges from 54.9% to 74.2%, and the best-performing models achieve a Cohen's kappa values around 0.5 against clinician labels, indicating moderate agreement. All models struggle to identify ambiguous documentation (Unclear), highlighting a key gap in current automated auditing. This work provides a clinician-validated benchmark and zero-shot baselines for systematic quality improvement in clinical documentation.

21.
arXiv (CS.AI) 2026-06-19

FlowFake: Liquid Networks for Audio Deepfake Detection

arXiv:2606.19579v1 Announce Type: cross Abstract: Audio deepfakes generated by neural text-to-speech and voice-cloning systems threaten speaker verification and public discourse at scale. The core challenge is cross-dataset generalization: detectors trained on one synthesis pipeline collapse on unseen forgeries. We argue that this failure is primarily because of structural synthetic speech artifacts which are multi-timescale trajectory anomalies. Though every existing detector aggregates a fixed-window frame statistics, this misaligns the architecture with the signal. We propose FlowFake, a Liquid Time-Constant (LTC) architecture whose hidden state evolves via a learned ODE, with per-neuron adaptive time constants simultaneously resolving spectral (10ms) and prosodic (2s) cues. At only 34K parameters FlowFake achieves formal BIBO stability and O(dt^4) integration error. On a four-dataset cross domain benchmark (ASVspoof2019-LA, FakeOrReal, InTheWild, MLAAD), FlowFake reaches 75.29% on ASVspoof2019 trained only on FakeOrReal and 79.97% trained only on MLAAD. It outperforms RawGAT-ST and Whisper-DF on every evaluated pair and matching SSL Wav2vec2 (300x larger) at 0.01% of its parameter count. The source code is available on : https://github.com/GhostRider2023/FlowFake

22.
arXiv (CS.AI) 2026-06-11

From Consumption to Reflection: Designing Human-AI Relations for Stable Reasoning

arXiv:2606.11195v1 Announce Type: cross Abstract: Large language models (LLMs) have transformed how humans access information, but not how we reason with it. Their fluency accelerates consumption while bypassing the slow, reflective processes that underpin sound judgment. This paper introduces Relational Reflective Intelligence (RRI), an inference-time governance layer that operationalizes reflection through auditable reasoning loops. RRI operates not inside the model but around it, providing a practical structure for stable, auditable reasoning between humans and LLMs. The core premise is that LLMs inherit cognitive vulnerabilities similar to those that shape human thought: reliance on intuitive shortcuts, confusion between representation and reality, and a preference for coherence over falsification. When humans and models share these tendencies, their errors compound. We refer to this as relational drift, a failure that arises from interaction rather than from the model alone. Addressing this requires a shift from modeling relations between words to structuring relations between model outputs and human reasoning. RRI provides this missing layer through three components: the Rose-Frame, which identifies likely breakdowns in reasoning; the Architect's Pen, which introduces targeted reflection steps at critical moments; and an inference-time workflow that embeds these steps without retraining the model. Together, these elements transform human-AI interaction into a joint reasoning system with explicit checkpoints, conflict surfacing, and an auditable trail of assumptions. Rather than making machines think like humans or forcing humans to reason like machines, RRI creates a structured interaction in which both compensate for each other's limitations. It reframes AI safety as a cognitive architecture problem, where reliable decisions depend on embedding reflection directly into the interaction process.

23.
arXiv (CS.CV) 2026-06-12

A Machine Learning Framework for Real-Time Personalized Ergonomic Pose Analysis

This paper introduces a new methodology for real-time prediction of ergonomic and non-ergonomic human poses using volumetric video data in three dimensions. Although the methodology was designed for ergonomic assessments, it can be adapted to other applications requiring real-time analysis of human posture. One aspect that makes this system stand out is its ability to analyze 3D point clouds during the assessment, enabling computation from multiple angles. This overcomes a critical limitation of cameras which provide often a fixed viewpoint, thereby restricting the data available for a thorough postural evaluation, especially when occlusions occur. The system continuously and automatically performs pose inference using the chosen perspective on the real-time streaming data; however, only the poses manually selected and labeled by the user are used to train the personalized deep learning classifier. The methodology has been refined through a case study in which RGB-D cameras captured subjects performing load-lifting tasks, enabling real-time skeletal labeling. The model was trained on this data and, following the training phase, performs inference on new streaming data in real time. This research offers a scalable and pragmatic approach for real-time ergonomic evaluation by combining state-of-the-art 3D data technologies and traditional 2D pose estimation algorithms. It addresses the increasing need for safety and health monitoring in workplace environments, marking a notable contribution to the domain.

24.
arXiv (CS.CL) 2026-06-16

Symbolic Informalization: Fluent, Productive, Multilingual

Authors:

Symbolic informalization enables a reliable conversion of formal mathematics to natural language. It has the potential to make machine-checked content human-readable without loss of precision. In a traditional proof system usage, symbolic informalization generalizes the limited mechanisms of syntactic sugar into the ordinary language of mathematics. In a setting where proofs are constructed by artificial intelligence and autoformalization, symbolic informalization can explain what precisely has been constructed. This paper outlines the project Informath, which aims to show how symbolic informalization can produce fluent text with a reasonable development effort and address multiple formal and natural languages. Informath is based on an interlingual architecture, where Dedukti works as a hub between different proof systems (Agda, Lean, Rocq) and Grammatical Framework (GF) takes care of linguistic correctness and variation in different natural languages.

25.
arXiv (CS.CV) 2026-06-11

ViT-FREE: Efficient Face Recognition via Early Exiting and Synthetic Adaptation

Vision Transformers (ViTs) have gained significant attention in computer vision and shown strong potential for face recognition (FR). However, their high computational cost makes deployment on resource-constrained devices challenging, motivating the need for methods that balance efficiency and accuracy. In this work, we investigate early exiting in pretrained ViTs as a simple yet effective training-free strategy for efficient FR inference. Leveraging the uniform feature dimensionality across transformer encoder blocks, we introduce ViT-FREE, a multi-exit framework that enables face verification directly from intermediate representations without modifying or retraining the backbone model, and thus, reducing inference cost. Empirically, we show that patch embeddings and attention maps evolve progressively across depth, exhibiting high similarity between consecutive ViT blocks and increasing alignment with the final representation. This indicates gradual feature refinement and attention convergence, suggesting that intermediate layers already provide stable and discriminative representations suitable for early exiting. Through extensive experiments on multiple FR benchmarks, we systematically analyze the accuracy-efficiency trade-off across exit depths. Our results demonstrate that later exits achieve a highly favorable balance, with exiting at layer 10 yielding up to a 20% speedup while incurring only a 1.5 drop in verification performance on benchmarks such as IJB-C. Also, we propose ViT-FREE_FT, a lightweight exit-specific fine-tuning strategy that adapts only the projection layers using a small synthetic dataset while keeping the transformer backbone frozen. This approach improves the performance of shallow exits while preserving the efficiency benefits and leaving deeper exits largely unaffected.