Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.LG) 2026-06-11

Characterizing the Impact of NVFP4 Quantization for Low-Power Edge AI Deployment

arXiv:2606.06527v3 Announce Type: replace-cross Abstract: Energy-efficient neural-network inference at the edge requires reducing arithmetic cost, memory traffic, computation energy, and storage overhead while maintaining acceptable accuracy. This paper presents an ablation-focused study of NVFP4 quantization for edge-efficient neural networks, with emphasis on the relationship between activation precision, weight precision, block-size scaling, retraining, and model accuracy. NVFP4 activations are represented using 4-bit FP4 data, an FP8 block scale, and an FP32 tensor scale, enabling ultra-low precision inference while preserving activation dynamic range. A block-size ablation over six edge-efficient models shows that block size B = 16 provides a practical accuracy/storage trade-off, requiring only 4.5078 bits per input for N = 4096. A weight precision ablation further shows that FP8 and FP16 weights provide only modest gains over FP4 weights under the same NVFP4 activation path, suggesting that activation quantization and scaling dominate much of the accuracy behavior. To isolate the benefit of the NVFP4 data type, this work compares conventional unscaled FP4 activation inference and NVFP4 activation inference with and without retraining. The results show that conventional FP4 inference collapses accuracy for most compact models, while NVFP4 without retraining already recovers substantial accuracy by restoring activation dynamic range through FP8 block scaling and FP32 tensor scaling. When combined with retraining, NVFP4 achieves the best accuracy across the evaluated models, demonstrating the effectiveness of scaling-aware FP4 (NVFP4) inference. These findings provide general design guidance for hardware-software co-design of low power edge inference across a broad range of accelerator platforms, including GPUs, Tensor Cores, FPGAs, domain-specific AI accelerators, near-memory computing systems, and emerging edge-computing architectures.

02.
arXiv (CS.LG) 2026-06-16

Diffusion Offline Reinforcement Learning for Fair and Energy-Efficient UAV-Assisted Wireless Networks

arXiv:2606.16331v1 Announce Type: new Abstract: The integration of generative artificial intelligence with wireless communication and signal processing systems has opened new avenues for intelligent, data-driven decision-making in future 6G networks. This work proposes a diffusion soft actor-critic (Diffusion-SAC) approach that leverages offline reinforcement learning (RL) enhanced by denoising diffusion probabilistic models (DDPMs) to optimize trajectory and scheduling control in unmanned aerial vehicle (UAV) networks. While offline RL methods, such as conservative Q-learning (CQL), can learn from static datasets, they often struggle to generalize in low-data or dynamic conditions. To address this, we combine the robustness of CQL with the generative power of diffusion models, enabling expressive and signal-aware policy learning that generalizes beyond behavior policies. Applied to a UAV-assisted wireless network, the proposed framework minimizes transmission energy and improves fairness among devices. Simulations show that Diffusion-SAC outperforms standard offline RL baselines, achieving more stable convergence and higher rewards even with limited datasets. The method enhances data efficiency, reduces energy consumption, and increases throughput by more than 35 % compared to existing algorithms, demonstrating its potential for robust policy learning in next-generation wireless control systems.

03.
bioRxiv (Bioinfo) 2026-06-18

Identification of environmental factors and growth stages in the prediction of fibre yield and fibre quality traits in rain-grown cotton

Context Understanding how and when environmental conditions influence overall crop performance is crucial for optimising the development of genotypes to a specific breeding target environment. We focused on economically important traits of Australian rain-grown cotton including fibre yield and quality traits, which have not been investigated comprehensively. The aim of the study was to identify relevant environmental factors, and the timing and extent of their impact on rain-grown cotton production. Methods We used a data driven approach to analyse the relationship between ten climate related environmental factors across various plant growth stages and eight fibre yield and quality traits, using a large-scale field dataset of 9,283 records collected over 23 years at 4 locations, with 53 unique year-location combinations. We applied eight complementary statistical models including stepwise, penalised and Bayesian linear regression, regression-tree based ensemble methods and deep learning frameworks to (1) select the most essential environmental covariates affecting rain-grown cotton production, and (2) evaluate the predictive performance of these models. Results The environmental impacts on rain-grown cotton production were trait and growth-stage specific. Number of rainy days and solar radiation were identified as the most influential environmental factors for fibre yield traits, vapour pressure deficit at maximum daily temperature was the most influential factor for majority of fibre quality traits. However, each analysed trait was influenced by multiple environmental factors across multiple growth stages (rather than a single factor or a single growth stage). These influential covariates explained a wide range of variation in the traits, accounting for 5.8% to 68.2%. Using the best-fit random forest model, our findings revealed non-linear relationships between key environmental covariates and the traits. Conclusions Environmental factors at different rain-grown cotton growth stages are key determinants for the performance of end-of-season fibre yield and fibre quality parameters. These findings highlight the need to account for environment conditions when developing cotton varieties optimised for rain-grown production systems. Potential strategies are proposed whereby these key environmental factors can be used to increase the rate of genetic gain in rain-grown cotton production systems. Implications The results of this study will be crucial for future genetic evaluations and analyses of genotype-by-environment interaction effects in rain-grown cotton, which must account for the influence of the environment on plant performance. Furthermore, these methods can be applied to other species to identify critical growth stages and environmental factors which most influence crop performance.

04.
arXiv (CS.AI) 2026-06-19

TeleMorpher: Toward Robust Simultaneous Motion-Location Editing

arXiv:2606.19676v1 Announce Type: cross Abstract: Diffusion models have achieved remarkable success in image and video generation and editing. While recent studies have extended these efforts toward motion editing, simultaneously transforming both motion and location-despite its practical importance-remains largely unexplored. To better understand robust motion-location editing, we first analyze the fundamental factors that degrade its quality. Based on this analysis, we propose TeleMorpher, one of the first one-shot frameworks to the best of our knowledge, for simultaneous motion-location editing. Our approach leverages motion priors, a target motion-centric video generated from an off-the-shelf model as motion-editing guidance, and the ground truth motion to enable more controllable and precise motion-location editing. Via this, our framework works as follows: (1) we first disentangle the protagonist and the background via pre-trained segmentation and inpainting models. (2) Then, we introduce a training-free pose warping that edits the protagonist's motion with the motion prior as the guidance. (3) The result of warped motion video is directly injected into a baseline motion editor during inference, mitigating the difference between source and target motions while preserving the appearance of the source video. (4) To enhance the reliability of quantitative evaluations, we propose two new LPIPS-based metrics that measure the background consistency before and after the motion editing and the fidelity of motion editing performance via measuring the difference between the extracted protagonist's skeletons from source and target videos. Experiments with in-the-wild videos and the TaiChi dataset demonstrate that TeleMorpher achieves superior performance across both quantitative and qualitative measurements (real-human evaluation), underscoring its effectiveness.

05.
arXiv (CS.AI) 2026-06-16

LatentGym: A Testbed For Cross-Task Experiential Learning With Controllable Latent Structure

arXiv:2606.15306v1 Announce Type: cross Abstract: We envision continually learning agentic systems that become more useful over time: as they encounter sequences of related tasks, they should infer the hidden structure shared across those tasks and use it to improve future decisions. This cross-task experiential learning capability is pivotal in domains such as personalization and interactive assistance, but existing training/evaluation frameworks do not provide shared, controllable latent structures and cannot measure whether or why agents improve. We introduce LatentGym: a controllable suite in which each environment is organized around a ground-truth latent variable governing the structure across tasks. Our construction yields metrics that separate exploration (whether the agent's actions gather information about the latent) from exploitation (whether the agent uses what it has gathered). We demonstrate our suite on empirical studies addressing three questions: how and why frontier models fail to adapt across related tasks; whether post-training on related task sequences improves general cross-task adaptation, and where those gains come from; and how design choices such as inter-task feedback shape training dynamics and generalization. Together, these results establish a controlled foundation for studying how LLM agents learn from experience across tasks, and for designing agents that adapt more reliably in sequential, personalized, and interactive settings.

06.
arXiv (CS.AI) 2026-06-18

HeRo-Q: A General Framework for Stable Low Bit Quantization via Hessian Conditioning

arXiv:2601.21626v2 Announce Type: replace-cross Abstract: Post Training Quantization (PTQ), a mainstream model compression technique, often leads to the paradoxical 'low error, high loss' phenomenon because it focuses solely on minimizing quantization error. The root cause lies in the Hessian matrix of the LLM loss landscape: a few high curvature directions are extremely sensitive to perturbations. To address this, we propose the Hessian Robust Quantization (HeRo Q) algorithm, which applies a lightweight, learnable rotation-compression matrix to the weight space prior to quantization. This joint framework reshapes the loss landscape by reducing the largest Hessian eigenvalue and reducing its max eigenvalue, thereby significantly enhancing robustness to quantization noise. HeRo-Q requires no architectural modifications, incurs negligible computational overhead, and integrates seamlessly into existing PTQ pipelines. Experiments on Llama and Qwen models show that HeRo Q consistently outperforms state of the art methods including GPTQ, AWQ, and SpinQuant not only achieving superior performance under standard W4A8 settings, but also excelling in the highly challenging W3A16 ultra low bit regime, where it boosts GSM8K accuracy on Llama3 8B to 70.15\% and effectively avoids the logical collapse commonly seen in aggressive quantization.

07.
arXiv (quant-ph) 2026-06-15

Spin disorder competing with positional symmetry breaking governs the metal-insulator behavior in oxide paramagnets

arXiv:2606.14624v1 Announce Type: cross Abstract: Numerous transition-metal oxides have low-temperature antiferromagnetic (AFM) states and high-temperature paramagnetic (PM) phases, where the AFM state is usually insulating while the PM phase can be either insulating or metallic. Without involving strong correlation, we use symmetry-broken density-functional theory (DFT) to obtain the PM phases of insulating NaFeO3 vs the recently discovered metallic NaOsO3. We develop the understanding of insulating and metallic behaviors in paramagnetic oxides by analyzing the interactions between magnetic and positional symmetry breaking: The insulating gap is governed by the competition between the spin disorder that induces a distribution of different magnitudes of local magnetic moments and the polymorphous distribution of off-center atomic displacements. NaFeO3, on the other hand, has large positional displacement with small spin-disorder-induced moments distribution, leading to insulating PM phase, whereas NaOsO3 has a pronounced spin-disorder-induced moments distribution that forces the PM phase to become metallic. Our work identifies this symmetry-breaking competition as a general framework to bridge seemingly disparate metal-insulator behaviors in transition-metal oxides paramagnets without invoking strong correlation.

08.
arXiv (quant-ph) 2026-06-17

Tripartite entanglement of remote atomic qubits

arXiv:2606.17173v1 Announce Type: new Abstract: Distributed entanglement across multi-node quantum networks is essential for a wide range of quantum technologies, including modular quantum computers, distributed sensing and metrology, and multi-party secure communication protocols. Such large-scale quantum networks will require photonic interconnects to generate and sustain entangled states across localized nodes. Previously, three-node distributed Greenberger-Horne-Zeilinger (GHZ) states have been generated between solid-state qubits and atomic ensembles, but not yet in the platform of individual atomic qubits, which can be replicated, detected, and individually controlled with high fidelity. Here we report the first fully-distributed GHZ state of qubits across a three-node quantum network of single atomic memories, using photonic interconnects. We achieve a bounded fidelity of $0.841(17) \leq \mathcal{F} \leq 0.881(17)$ at an entanglement generation rate of 0.095(5)/sec and measure a clear violation of Mermin's inequality while closing the detection loophole for the first time in a fully-distributed multipartite entangled state.

09.
arXiv (CS.CV) 2026-06-19

FlowBender: Feedback-Aware Training for Self-Correcting Conditional Flows

Conditional diffusion and flow models routinely fail to satisfy the very constraints that define their task. For instance, a depth-conditioned model often produces images whose re-extracted depth disagrees with the input, even though the forward operator–the depth predictor defining the constraint–is available during both training and inference. Existing approaches generally fall into two categories: supervised models that treat the conditioning signal as a static cue and ignore alignment information at inference, and guidance-based methods that consult it through hand-tuned linear updates, typically trading fidelity to the condition against the plausibility of the generated sample. We argue that the fundamental gap in both paradigms is that the model is never trained to utilize its own alignment error. We introduce FlowBender, a closed-loop framework that treats this error as a first-class input, training the network to learn a correction policy conditioned on inference-time feedback. At each step, an unguided look-ahead pass estimates the clean signal, a task-specific deviation is computed via the forward operator, and a refinement pass consumes this signal to produce a corrected velocity. We propose several variants of FlowBender, including a gradient-based formulation for differentiable operators and a zero-order variant for non-differentiable settings such as JPEG compression. For efficient sampling, we introduce a prior-step shortcut that enables closed-loop correction at a minimal additional computational cost. Across image-to-image translation, restoration, and 3D mesh texturing, FlowBender consistently outperforms standard supervised baselines, alignment-loss-augmented training, and state-of-the-art inference-time guidance, improving fidelity and plausibility simultaneously rather than trading them against each other. Project page: https://flow-bender.github.io/

10.
medRxiv (Medicine) 2026-06-18

Evaluating Deep-Learning Based Quantification of Breast Arterial Calcification on Mammography for Cardiovascular Risk Assessment

Purpose: To develop and evaluate a deep learning model for automated quantification of breast arterial calcification (BAC) on screening mammography and to assess whether AI-derived BAC burden predicts major adverse cardiovascular events (MACE) in women. Methods: In this retrospective study, 202,006 women who underwent screening mammography without history of MACE were included. A BAC segmentation model was trained on an expert-annotated dataset using a multi-task U-Net with a ResNet-18 encoder to detect and segment BAC. BAC burden was quantified as area (mm{superscript 2}) from model-generated masks using DICOM pixel spacing and categorized by tertiles into low, intermediate, and high. The PREVENT score and incident MACE were identified from electronic health records. Cox proportional hazards models were developed to evaluate AI-derived BAC burden and PREVENT score alone, and combined models for 5 - and 10-year cardiovascular risk prediction. Results: Among 202,006 women (mean age 54.8{+/-}11.7 years), 23.1% had AI-detected BAC, and 7,701 (3.8%) developed incident MACE during a median follow - up of 7.5 years. On the geographically held-out test set, the BAC model achieved an AUROC of 0.97, Dice score of 0.6678, and Pearson correlation of 0.961 between AI-derived and manually annotated BAC burden. BAC burden increased with age and was higher among women who developed MACE. Five - year MACE incidence increased across BAC categories from 1.5% in women without BAC to 6.9% in those with high BAC burden. BAC burden alone showed modest prediction of MACE, with 5-year and 10-year AUROCs of 0.661 and 0.650, respectively, while PREVENT achieved AUROCs of 0.781 and 0.771. Adding BAC to PREVENT produced minimal improvement in discrimination. Conclusion: Deep learning-based BAC quantification from routine mammography is feasible, accurate, and associated with future cardiovascular risk. Although BAC added little to PREVENT for overall discrimination, it may serve as a scalable opportunistic imaging biomarker to identify women at elevated cardiovascular risk and support preventive care.

11.
arXiv (CS.LG) 2026-06-19

Constrained hybrid modelling to predict microbial dynamics and organic matter turnover in soil systems

arXiv:2606.20329v1 Announce Type: new Abstract: Soil microorganisms control organic matter cycling and largely determine how soil systems can cope with and mitigate climate change and environmental threats. Representing microbial dynamics in process-based soil models is therefore critical to predict carbon cycling in soils, albeit highly challenging to inform from data. One promising approach to improve their parametrisation is the integration of genomic data, yet modelling the complex and unknown relationship between genomes and the processes the microbes are driving is an unsolved problem. In this work, we present the first hybrid modeling framework for deriving biokinetic parameter values of a process-based soil organic matter turnover model from metagenome-inferred functional traits based on DNA sequencing data. Our model predicts biokinetic parameters of the process-based model from genomic trait data with a neural network and integrates constraints from ecological theory and literature to ensure realistic behavior, even of non-observed state variables. We evaluate our method on synthetic genomic trait datasets of varying complexity and on real data, showing that our approach improves performance over multiple baselines and learns the dynamics of unmeasurable components of the process-based model effectively, even for small training datasets.

12.
arXiv (CS.CV) 2026-06-16

Lesion-DDPM: Lesion-Enhanced 3D Diffusion for MS MRI Synthesis

3D FLAIR MRI is widely recommended as one of the standard MRI sequences for brain imaging in multiple sclerosis (MS), but publicly available MS datasets remain relatively small and vary across scanners, acquisition protocols, and lesion patterns. This scarcity and variability hinder the development of robust neuroimaging machine learning models and are particularly challenging for generative models that aim to synthesize images while preserving small, sparse lesions. We propose Lesion-DDPM, a 3D conditional diffusion framework for lesion-aware FLAIR synthesis that incorporates multi-level anatomical mask injection together with a lesion-weighted reconstruction loss to emphasize lesion voxels while maintaining global brain structure. Using a curated subset of the MSLesSeg dataset, we compare Lesion-DDPM with representative state-of-the-art GAN- and diffusion-based models, assessing both image-generation metrics and downstream 3D U-Net segmentation. In our experiments, Lesion-DDPM achieved the lowest lesion-region reconstruction error among all methods. In a downstream 3D U-Net lesion segmentation task, a model trained only on Lesion-DDPM-generated scans and evaluated on real MRIs reached a Dice score of 0.616 compared with 0.569 for the best competing synthetic dataset. When Lesion-DDPM images were added to the real training set, the Dice score further increased to 0.685.

13.
medRxiv (Medicine) 2026-06-16

Physiological Aging of the Respiratory System (PARS): from development to application

Background: Aging has a critical role in lung changes and the outcome of lung disease. Several lung aging equations have been proposed to measure deviation from physiological aging of the respiratory system. In this study, we aimed to develop a single measure of accelerated lung aging and show its application as a measure of lung aging. Method: We used a pre-bronchodilator pulmonary function test (PFT) from NHANES adult participants recruited from 2007 to 2011. We applied Klemera-Dubal Method (KDM) to four PFT measurements, FEV1, FVC, FEF25-75, and PEF, to calculate a measure of lung biological aging. Physiological Aging of the Respiratory System (PARS) was calculated from the residual method vs. chronological age. We tested the construct validity of PARS by measuring its association with risk factors of lung health. The prognostic validity was measured using a survival analysis. Sampling weights were applied to all analyses. Results: In 14,123 adult participants, the mean (SD) of accelerated lung age (PARS) was 0 (8.2) years. Participants with a history of asthma and emphysema had 4- and 10-year higher PARS. Cigarette smoking, lower socioeconomic status, black race, higher serum cadmium, and lower serum selenium and magnesium were associated with higher PARS. During 116 months of follow-up, PARS was associated with a higher mortality (HR = 1.06, 95%CI: 1.05-1.07 per year). Females with higher PARS had a higher risk of death (P for interaction < 0.001). Results were consistent across different subgroups and sensitivity analyses. Conclusion: PARS is a noninvasive lung aging marker and can be applied as a single measure of lung accelerated aging in the adult population. Its strong construct and predictive validity support its future application among different populations with and without lung disease.

14.
arXiv (CS.LG) 2026-06-18

A Human-in-the-Loop Bayesian Optimization Framework for Constraint-Aware Bioprocess Development

arXiv:2606.19230v1 Announce Type: new Abstract: This work presents an extension to Pareto Front Guided Sampling (PFGS), a Human-in-the-Loop (HitL) Bayesian Optimization (BO) framework in which Gaussian process (GP) surrogate-derived quantities are reformulated as objectives of a multi-objective optimization problem, and the resulting Pareto front is exposed to a domain expert for interactive candidate selection rather than returning a single automated recommendation. The framework is extended in two directions: constrained optimization is addressed by incorporating the posterior probability of satisfying output specification limits as an explicit Pareto objective, computed analytically from the GP posterior distribution; robust optimization is addressed by a Monte Carlo sampling strategy that estimates expected lower-confidence performance over a user-defined variability of input perturbations, capturing performance degradation under likely implementation deviations. The resulting multi-dimensional Pareto representation renders trade-offs between predicted performance, model uncertainty, probabilistic constraint satisfaction, and input robustness simultaneously visible through pairwise two-dimensional projections on an interactive dashboard, enabling selection criteria to be iteratively refined as the surrogate model improves and development objectives evolve. The framework is showcased on an eight-dimensional fed-batch Chinese Hamster Ovary (CHO) cell culture simulator demonstrating systematic identification of high-performing, feasibility-compliant, and perturbation-resilient operating conditions, and illustrating how expert-defined requirements provide a principled stopping criterion and support informed allocation of experimental resources.

15.
arXiv (CS.LG) 2026-06-12

Revisiting Neural Processes via Fourier Transform and Volterra Series

arXiv:2606.01172v2 Announce Type: replace Abstract: Modeling unknown latent functions from finite, irregularly sampled measurements is a recurring challenge across science and engineering. Neural processes (NPs), a family of probabilistic functional models, are promising solutions – especially when endowed with domain-specific symmetries like translation equivariance, which improve sample efficiency and generalization. Yet existing translation-equivariant NPs face two limitations: (i) they stack generic components with non-linearities, obscuring the induced function class and limiting interpretability; and (ii) convolutional designs rely on kernels with local receptive fields and require dense uniform input grids, while attention-based methods avoid these issues but scale quadratically with the number of observations. We address both with two contributions. First, using the Volterra expansion, we characterize continuous translation-equivariant operators as sums of higher-order convolutions, yielding analytical transparency while admitting efficient approximation by first-order convolutions. Second, we introduce set Fourier convolutions (SFConvs), a frequency-domain parameterization that operates directly on irregularly sampled points, achieves approximately global receptive fields, and scales linearly in the number of observations. Building on these ideas, we propose two conditional NPs (CNPs): SFConvCNPs, which stack SFConv blocks with non-linearities, and SFVConvCNPs, which integrate the Volterra formulation. Experiments on synthetic and real-world datasets demonstrate our methods' efficacy against state-of-the-art baselines.

16.
arXiv (CS.AI) 2026-06-15

A fully GPU-based workflow for building physics emulators of hypersonic flows

arXiv:2606.13742v1 Announce Type: cross Abstract: The ability to resolve complex physical phenomena with high fidelity and at low computational cost is central to addressing key challenges in modern engineering. A prime example lies in hypersonic flows, where the precise prediction of the full flowfield topology, in particular with respect to shock wave location and intensity, is critical. Yet supersonic and hypersonic flows continue to be a stumbling block for traditional reduced-order models and neural emulators that struggle to capture steep gradients in flow states with physical consistency in applications of industrial relevance. To that end, we introduce a fully GPU based workflow that integrates accelerated data generation with the training of neural emulators augmented by uncertainty quantification and physics-aware refinement. Our workflow is enabled by a differentiable high-fidelity solver (JAX-Fluids) which we employ for rapid dataset creation and residual-based improvement of the neural emulator to enhance physical consistency. Building on this framework, we first present a suite of model architectures and analyze their scaling behavior to expose their strengths and shortcomings. We then show that residual-based refinement enables training on cases where only mesh and input parameters are available, substantially reducing residuals and improving physical consistency. Together, differentiable simulation and residual-based refinement yield physics emulators that remain reliable beyond their training distribution, a key requirement for deploying surrogates in real-world engineering design loops.

17.
arXiv (CS.CV) 2026-06-11

From Content to Knowledge: Lightning Fast Long-Video Understanding with Neural Knowledge Representations

We propose a new paradigm for long video understanding by treating a long video as a Neural Knowledge Representation (NKR). NKR represents video contents neither as a stream of tokens nor pre-organized databases, but as an individual small portion of network weights attached to the VLM backbone. The NKR weights are optimized to encapsulate the video's semantic content via a novel Agentic Knowledge Distillation (AKD) process, where an agent automatically synthesizes dense descriptions and question-answer pairs to distill the video's knowledge into the NKR. While AKD serves as a comprehensive, one-time encoding phase, the resulting NKR transforms the video into a portable, reusable asset. At inference, the lightweight NKR is mounted onto a frozen Vision-Language Model (VLM), enabling direct, query-based understanding without reloading or re-encoding the original video. This approach decouples video length from inference cost, offering high amortized efficiency for multi-turn video understanding. Experiments on the LVBench benchmark show our method achieves performance comparable to state-of-the-art approaches while reducing end-to-end latency by over two orders of magnitude, opening new possibilities for interactive long-video understanding.

18.
arXiv (CS.AI) 2026-06-18

Rescaling MLM-Head for Neural Sparse Retrieval

arXiv:2606.18811v1 Announce Type: cross Abstract: Learned sparse retrieval (LSR) models such as SPLADE have traditionally used BERT-style masked language models as backbone encoders. A natural expectation is that replacing BERT with stronger pretrained encoders should improve retrieval effectiveness. However, we find that under standard SPLADE training recipes, backbones with large MLM-head L2 norms can suffer performance degradation and even training collapse under standard SPLADE training recipes. We identify this failure as a scale mismatch in the MLM head: SPLADE directly uses MLM-head outputs to construct sparse lexical representations, and query-document relevance is computed by an unnormalized dot product over these representations. As a result, an inflated MLM-head scale can amplify sparse activations, distort matching scores, and destabilize contrastive training under common training settings. To address this issue, we introduce a simple initialization-time correction that rescales the MLM-head projection by a constant factor before SPLADE training. This zero-cost adjustment improves training stability without modifying the model architecture or training objective. Across both in-domain and out-of-domain retrieval benchmarks, this simple correction substantially improves large-norm backbones such as ModernBERT and Ettin, turning unstable training runs into competitive sparse retrievers. In several settings, the corrected models further match or surpass the classic BERT-SPLADE baseline. These findings suggest that the bottleneck in adapting pretrained encoders to LSR is not encoder capacity alone, but the calibration of the MLM-head scale used to construct sparse lexical representations.

19.
arXiv (quant-ph) 2026-06-16

Towards Quantum Limited Spatial Resolution of NV-Diamond Magnetometry

arXiv:2508.13438v2 Announce Type: replace Abstract: Optically addressable ensembles of solid-state defects, such as nitrogen vacancy (NV) centers, are a leading modality for imaging-based magnetometry, thermometry and strain sensing. However, monitoring the fluorescence of individual defects within a sub-diffraction ensemble remains an outstanding challenge that currently limits access to atomic-scale features and dynamics. For compact clusters of NVs, we formulate imaging-based atomic sensing as a low-dimensional multiparameter estimation task in which one seeks to localize each defect and quantify the field strength in its immediate vicinity. In this work, we employ optical spatial mode demultiplexing (SPADE) to enhance localization and brightness estimation accuracy at sub-diffraction scales. Specifically, we develop a two-stage sensing protocol that augments direct imaging by projecting the incoming optical field onto point spread function (PSF)-adapted, i.e., PAD spatial modes and Yuen-Kennedy-Lax (YKL) spatial modes enabling efficient extraction of emitter positions and brightnesses. The YKL-SPADE measurement employed for brightness estimation is shown to be quantum-optimal in the case of two emitters and establishes a new connection between quantum detection and estimation theories. We numerically evaluate the statistical performance of our protocol for sub-diffraction optically detected magnetic resonance (ODMR) and Rabi sensing experiments. Compared to conventional focal plane intensity measurements, our protocol improves emitter localization accuracy by 6$\times$ and brightness estimation accuracy by 2$\times$ for tightly confined ensembles, residing well below the diffraction limit.

20.
medRxiv (Medicine) 2026-06-18

Automated Airways Characterization and Assessment of Cystic Fibrosis from CT Imaging

Background Advancements in medical imaging have enabled non-invasive diagnosis and staging of cystic fibrosis (CF) using CT scans, revealing dilated airways, an increased number of visible airways, and airway generation splits in these patients. However, manual characterization of airways remains time-consuming and challenging due to the numerous structural changes, thereby limiting clinical feasibility. This study aims to develop an automated algorithm to characterize airways from segmented lung CT scans and apply this to a retrospective population. This approach reduces the time required to analyze images and obtain disease-staging results. Methods This framework consists of two stages. The first stage extracts and skeletonizes the airway tree from lung CTs, while the second stage measures lung features, including airway volumes, branch counts, generation splits, diameters, and cross-sectional areas. This permits comprehensive characterization for use in clinical assessment. Results The airways analysis was performed on 169 CT volumes ranging in age from 6 to 18 years of age, revealing substantial differences in detected airway branches, generation splits, and normalized airway volume between the control and CF groups. The framework also measures airway diameters and cross-sectional areas, revealing an increase in the number of small airways in cystic fibrosis patients, due to early bronchiectasis. These findings align with previous research and demonstrate the framework's ability to accurately quantify airway changes in patients with CF. Discussion The framework extracts entire airway trees, facilitating measurements of volume, branch count, diameters, and cross-sectional areas, which change with CF severity and/or treatment. However, partial lung atelectasis can limit the accuracy of airway detection in moderate-to-severe cases. Funding NIA U54 AG054345 and NIA R21 AG07857501

21.
arXiv (CS.LG) 2026-06-17

Price of metric universality in vector quantization is at most 0.11 bit

arXiv:2602.05790v2 Announce Type: replace-cross Abstract: Fast computation of a matrix product $W^\top X$ is a workhorse of modern LLMs. To make their deployment more efficient, a popular approach is that of using a low-precision approximation $\widehat W$ in place of true $W$ (``weight-only quantization''). Information theory demonstrates that an optimal algorithm for reducing precision of $W$ depends on the (second order) statistics of $X$ and requires a careful alignment of vector quantization codebook with PCA directions of $X$ (a process known as ``waterfilling allocation''). Dependence of the codebook on statistics of $X$, however, is highly impractical. This paper proves that there exist a universal codebook that is simultaneously near-optimal for all possible statistics of $X$, in the sense of being at least as good as an $X$-adapted waterfilling codebook with rate reduced by 0.11 bit per dimension in the case when $W$ is Gaussian. Such universal codebook would be an ideal candidate for the low-precision storage format, a topic of active modern research, but alas the existence proof is non-constructive. Equivalently, our result shows existence of a net in $\mathbb{R}^n$ that is a nearly-optimal covering of a sphere simultaneously with respect to all Hilbert norms.

22.
arXiv (CS.LG) 2026-06-12

Forecasting Is Not Attribution: Localizing Decoder Bypass in Graph-Based Neural Marketing Mix Models

arXiv:2606.12687v1 Announce Type: new Abstract: Marketing mix models are used to forecast business outcomes and to attribute those outcomes to marketing channels, but these goals are not equivalent. We study a failure mode in graph-based neural MMM called attribution bypass: a high-capacity decoder can obtain low forecasting error through target autoregression, dense communication, co-movement, context, or latent memory while failing to route counterfactual sensitivity through the graph used as the attribution object. We introduce DICE-MMM as a bounded diagnostic and training framework. We do not claim that observational neural MMM identifies causal effects. Instead, DICE separates three questions often conflated in graph-based MMM: graph recovery, forecasting accuracy, and whether the trained decoder's perturbation-induced influence is graph aligned. Stage 1 trains a graph encoder with a restricted graph-mediated decoder. Stage 2 freezes the selected encoder and trains a graph-safe latent decoder whose cross-node communication must pass through the supplied graph. Decoder use is evaluated with CIG, AR-CIG, and graph-swap tests. Across controlled R/d/T swaps and an external multi-graph rawlog stress test, DICE improves stable graph recovery over CausalMMM. The experiments show that forecasting accuracy is not an attribution certificate: in a sparse-target benchmark, no-graph and full-graph decoders achieve MSE@7 around 0.004 while AR-CIG nAUPRC remains near or below zero, whereas an oracle graph reaches 0.807 +/- 0.129 at comparable MSE. Frozen graph-swap localizes the bottleneck: the same DICE-hard-trained decoder moves from nAUPRC -0.044 +/- 0.006 under learned graph inputs to 0.894 +/- 0.027 with the oracle graph. The contribution is a stress test and failure-localization framework showing that low MSE can hide attribution bypass and that the unresolved bottleneck is graph-support selection, not forecasting or decoder capacity.

23.
Science (Express) 2026-06-04

Long-range extended chains arising from polymerization-driven spontaneous assembly | Science

Authors: Unknown Author

A central challenge for conjugated polymers is to achieve long-range order while remaining solution-processable, which is essential for matching the electrical performance of their counterparts of crystalline inorganic semiconductors. Here we show that n-doped poly(benzodifurandione) (n-PBDF) can undergo polymerization-driven spontaneous assembly (PSA), in which chain growth, chemical doping, and structural ordering are intrinsically coupled, yielding long-range chain extension over hundreds of nanometers. We reveal that the spontaneously formed n-PBDF nanoribbons arise from a self-initiated, convergent growth mechanism driven by cooperative monomer–polymer interactions and stabilized by proton-coupled duplex chains and the polymer’s intrinsic polyelectrolyte character. With long-range extended chains in the nanoribbons, the aligned n-PBDF thin films demonstrate metallic-level conductivity (>10 4 Siemens per centimeter).

24.
arXiv (CS.LG) 2026-06-17

Turning music identification into a neural forward pass

arXiv:2606.17301v1 Announce Type: cross Abstract: Search, a foundational operation in computer science, maps a query to a matching item in a collection. It is typically implemented as a System-2 like, rule-based pipeline in which a key is computed, an index is probed, and candidates are verified. By contrast, human recognition resembles a System-1 like, associative model of identity recovery, in which even partial cues can trigger a recall without explicitly enumerating, ranking, or even accessing discrete candidates. Here, we show that music sound identification, a difficult search problem, can be performed in a single neural feed-forward pass by a generative transformer. Trained on an audio dataset, the model predicts the corresponding track identifier from a short audio excerpt. This approach surpasses state-of-the-art acoustic fingerprinting, with the largest gains for short audio segments (1 second), demonstrating the method is not only viable but advantageous. Moreover, it reduces external storage to 0.33% of the baseline footprint and improves inference latency by 2.3x (p95). Furthermore, the model can reject queries for unseen tracks, supporting open-set operation while reducing misattribution risk. Using music track identification as an example, this work reframes search, bringing it closer in spirit to human associative recognition and away from algorithmic database lookup.

25.
arXiv (CS.AI) 2026-06-19

Data Standards for Humanoid Robotics: The Missing Infrastructure for Physical AI

arXiv:2606.19769v1 Announce Type: cross Abstract: The scalability of humanoid robots will depend not only on models and hardware, but also on whether physical experience can accumulate across robots, tasks, organizations, and time. Drawing on the authors' work in developing ISO/WD 26264-1, Humanoid robot datasets – Part 1: General requirements, within ISO/TC 299/WG 16, this article argues that data standards are becoming foundational infrastructure for Physical AI. We develop three insights. First, humanoid robot data is embodied interaction data, not a collection of isolated digital samples; a useful dataset must preserve the relationship among robot body, action, task, scene, execution trace, and outcome. Second, its value depends on physical coherence: multimodal streams are reusable only when timing, coordinate frames, calibration, kinematics, units, and synchronization assumptions remain inspectable. Third, the main bottleneck is not only data scarcity, but non-cumulative data caused by high collection costs, data silos, and inconsistent evaluation. We argue that humanoid robot data standards address these bottlenecks by making embodied experience interpretable, shareable, traceable, and reusable. A general standard should provide horizontal infrastructure for lifecycle management, metadata, provenance, quality, versioning, and traceability, while capability-specific parts should define domain grammar for manipulation, locomotion, human-robot interaction, cognition, and future humanoid capabilities. As AI moves from screens into bodies, data standards must evolve from organizing digital information to structuring physical interaction.