Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (quant-ph) 2026-06-12

Toward quantum-noise-limited interferometric measurements of optical nonlinearity in vacuum

arXiv:2602.10896v2 Announce Type: replace-cross Abstract: Quantum Electrodynamics predicts that the vacuum must behave as a nonlinear optical medium: the vacuum optical index should increase when it is stressed by intense electromagnetic fields. The DeLLight (Deflection of Light by Light) project aims to measure it by using intense and ultra-short laser pulses. The experiment uses a Sagnac interferometer to amplify the tiny deflection signal of a low-intensity probe pulse crossing the vacuum refractive-index gradient produced by an external high-intensity pump pulse. The measurement of the amplified signal by a CCD camera requires a high spatial resolution, which is limited by the ultimate quantum noise of the CCD. However, interferometric phase noise induced by the mechanical vibrations of the interferometer is also amplified and degrades spatial resolution. To overcome this, we propose a new method named High-Frequency Phase Noise Suppression (HFPNS), based on the addition of a delayed replica (5 ns) of the probe pulse. The delayed pulse, which is not affected by the pump but is subject to the same vibration noise, enables offline subtraction of correlated phase noise. In this work, we present an experimental proof-of-concept on a prototype interferometer operating with a limited amplification factor ($\mathcal{A}\simeq25$), about 10 times smaller than the required value of the final experiment. We have succeeded in reducing phase noise by a factor of 40, resulting in a residual noise level 2.3 times higher than the expected quantum noise. The residual noise is linked to delay-line instabilities and incident beam pointing fluctuations present during these tests. This result validates HFPNS as a robust method for future quantum-noise-limited interferometric measurements of vacuum optical nonlinearity, though additional stabilization and higher interferometric amplification are still needed.

02.
arXiv (CS.CV) 2026-06-17

MoonSplat: Monocular Online Gaussian Splatting with Sim(3) Global Optimization

Online 3D reconstruction from monocular image sequences is a challenging and ongoing research topic. 3D Gaussian Splatting (3DGS), leveraging its high-quality real-time rendering capability, empowers online 3D reconstruction to represent dense scenes with enhanced expressiveness, and thus holds great promise for a wide range of applications such as robotics and AR/VR. However, existing online 3DGS methods still suffer from some key challenges: fragile camera pose estimation due to the lack of global optimization, and low optimization efficiency in large-scale or long-sequence scenarios. To address these issues, we propose a robust and efficient online voxelized 3DGS reconstruction framework integrated with global $Sim(3)$ optimization, which enables reliable camera tracking and efficient global loop closure for both camera poses and voxelized 3DGS. To accelerate the convergence of the voxelized 3DGS, we further introduce a color residual learning strategy, which not only boosts optimization speed but also enhances rendering quality. Extensive experiments on diverse indoor and outdoor datasets demonstrate that our method achieves state-of-the-art performance in both camera pose estimation accuracy and rendering quality, while retaining real-time efficiency. Additionally, we develop and deploy a real-world UAV-based active reconstruction system grounded on our proposed method, validating its robustness and generalizability for practical online 3D reconstruction tasks. Our code and data are available at https://github.com/TrickyGo/MoonSplat.

03.
arXiv (CS.AI) 2026-06-17

Transformer-Based Warm-Starting for Feasible and Optimal Terminal Approach to Tumbling Objects with Space Manipulators

arXiv:2606.17317v1 Announce Type: cross Abstract: Real-time trajectory generation for on-orbit robotic servicing is challenging due to the nonlinear coupling between spacecraft bus motion, manipulator dynamics, visibility cone, and trajectory-level safety constraints. This paper studies learning-based warm-starting for sequential convex programming (SCP) in the terminal approach of a space manipulator toward a tumbling target. The proposed framework decomposes the problem into a system center-of-mass translational planning stage and a coupled attitude–manipulator torque-allocation stage, and applies a causal transformer warm-start to the latter, which constitutes the dominant computational bottleneck. Linear and flow matching action decoders are compared under different action-chunking and training dataset sizes, and the resulting warm-starts are evaluated under both cost-optimal and feasibility projection using SCP. Across 300 held-out scenarios, the learned warm-start reduces the second-stage SCP iteration count by up to 28% and the runtime by 23% while preserving the final control-cost distribution. When the learned warm-starts are used for nonconvex feasibility projection, they nearly halve the runtime relative to cost-optimal SCP, while avoiding the catastrophic high-cost tail behavior observed when initialized heuristically. These results indicate that sequence-model warm-starts can improve both the computational efficiency and trajectory robustness of optimization-based terminal guidance for space manipulation.

04.
arXiv (CS.AI) 2026-06-18

Essential Subspace Merging for Multi-Task Learning

arXiv:2606.19164v1 Announce Type: cross Abstract: Model merging aims to enable multi-task learning by integrating the capabilities of multiple models fine-tuned from the same pre-trained checkpoint into a single model. Its core challenge is inter-task interference among task-specific parameter updates. In this paper, we analyze the output shifts induced by task updates and observe that their energy is concentrated in a small number of principal directions. We call the subspace spanned by these directions the essential subspace. In contrast, most remaining directions carry little task-relevant energy, but their accumulation across multiple task updates can cause severe interference during merging. Motivated by this observation, we propose Essential Subspace Decomposition (ESD), which decomposes each task update according to the principal components of its activation shift. Based on ESD, we introduce Essential Subspace Merging (ESM), a training-free static merging method that orthogonalizes and fuses essential components into one compact multi-task model. We further extend ESM to ESM++, a training-free dynamic merging method that decomposes task-specific residuals into low-rank experts and selects the most relevant expert through prototype-based routing during forward inference. Extensive experiments across multiple task sets and model scales demonstrate that ESM and ESM++ effectively preserves task knowledge while reducing inter-task interference.

05.
arXiv (CS.LG) 2026-06-16

Deep Learning-Based Lunar Crater Terrain Relative Navigation

arXiv:2606.14776v1 Announce Type: cross Abstract: Accurate position estimation is crucial for the successful implementation of future lunar landings using autonomous vehicles, especially in dangerous environments with sparse terrain features. In this paper, we propose a terrain relative navigation (TRN) algorithm combining our deep-learning crater detector, which was designed specifically for the NASA Crater Detection Challenge problem, and an Extended Kalman Filter (EKF). Our detector analyzes crater features from the monocular images acquired from orbit, and their matches with craters from a global database are identified via a Hungarian assignment approach followed by the consensus-based outliers removal method. The estimated measurements are then used to refine an EKF, where spacecraft pose estimation in the Lunar-Centered Lunar-Fixed (LCLF) frame of reference, augmented with altitude aiding information, constrains radial drift. The simulation results indicate that even if the spacecraft is off from its actual location up to 5 km, TRN could recover from this situation, achieving navigation error reduction to a few hundred meters. It should be noted that in order to maintain crater feature correspondences, it is important to match the image resolution and the scales within the scene to the detector training set distribution.

06.
arXiv (CS.AI) 2026-06-12

From Digital to Physical: Digital Agents as Autonomous Coaches for Physical Intelligence

arXiv:2601.21570v2 Announce Type: replace Abstract: The field of Embodied AI is witnessing a rapid evolution toward general-purpose robotic systems, fueled by high-fidelity simulation and large-scale data collection. However, this scaling capability remains severely bottlenecked by a reliance on labor-intensive manual oversight from intricate reward shaping to hyperparameter tuning across heterogeneous backends. Inspired by LLMs' success in software automation and science discovery, we introduce \textsc{EmboCoach-Bench}, a benchmark evaluating the capacity of LLM agents to autonomously engineer embodied policies. Spanning 32 expert-curated RL and IL tasks, our framework posits executable code as the universal interface. We move beyond static generation to assess a dynamic closed-loop workflow, where agents leverage environment feedback to iteratively draft, debug, and optimize solutions, spanning improvements from physics-informed reward design to policy architectures such as diffusion policies. Extensive evaluations yield three critical insights: (1) autonomous agents can qualitatively surpass human-engineered baselines by 26.5\% in average success rate; (2) agentic workflow with environment feedback effectively strengthens policy development and substantially narrows the performance gap between open-source and proprietary models; and (3) agents exhibit self-correction capabilities for pathological engineering cases, successfully resurrecting task performance from near-total failures through iterative simulation-in-the-loop debugging. Ultimately, this work establishes a foundation for self-evolving embodied intelligence, accelerating the paradigm shift from labor-intensive manual tuning to scalable, autonomous engineering in embodied AI field.

07.
arXiv (CS.CV) 2026-06-16

Federated Medical Image Segmentation under Real-World Label Noise: A Benchmark Suite for Noisy Label Learning Method Selection

While federated learning (FL) enables collaborative medical image segmentation without centralizing sensitive data, real-world deployment is frequently complicated by cross-site label imperfections such as contour disagreement, missing or additional structures, and confused labels. Federated noisy label learning (FNLL) aims to mitigate these effects, yet remains underused in practice as existing evidence is largely based on synthetic noise, simplified settings, and limited real-world noisy evaluation. We address this gap by introducing a benchmark suite that combines diverse real-world noisy datasets, deployment-relevant client-noise scenarios, and label-noise-targeted evaluation to support systematic FNLL assessment and informed method selection. The suite combines curated real-world noisy medical image segmentation datasets from diverse sources with a comprehensive federated segmentation framework including various client-noise scenarios and noise-targeted evaluation. The presented suite provides a realistic and discriminative basis for FNLL evaluation in medical image segmentation and establishes a reusable foundation for fair benchmarking, dataset-specific label-noise characterization, and future method development under realistic federated settings. Code is available at https://github.com/MIC-DKFZ/FedSegNoiseBench.

08.
arXiv (CS.AI) 2026-06-17

Adaptive Domain Models: Bayesian Evolution, Warm Rotation, and Principled Training for Geometric and Neuromorphic AI

arXiv:2603.18104v5 Announce Type: replace Abstract: Prevailing AI training assumes reverse-mode automatic differentiation over IEEE-754 arithmetic. The memory overhead of training relative to inference, optimizer complexity, and structural degradation of geometric properties through training are consequences of this arithmetic substrate. This paper develops an alternative training architecture grounded in three prior results: the Dimensional Type System and Deterministic Memory Management framework (Haynes 2026), which establishes stack-eligible gradient allocation and exact quire accumulation as design-time verifiable properties; the Program Hypergraph (Haynes 2026), which establishes grade preservation through geometric algebra computations as a type-level invariant; and the b-posit bounded-regime design (Jonnalagadda et al. 2025), which makes posit arithmetic tractable across hardware targets conventionally considered inference-only. Their composition enables depth-independent training memory bounded to approximately twice the inference footprint, grade-preserving weight updates, and exact gradient accumulation, applicable uniformly to loss-function-optimized and spike-timing-dependent neuromorphic models. We introduce *Bayesian distillation*, a mechanism by which the latent prior structure of a general-purpose model is extracted through the ADM training regime, resolving the data-scarcity bootstrapping problem for domain-specific training. For deployment, we introduce *warm rotation*, an operational pattern in which an updated model transitions into an active inference pathway without service interruption, with correctness formalized through PHG certificates and signed version records. The result is a class of domain-specific AI systems that are smaller and more precise than general-purpose models, continuously adaptive, verifiably correct with respect to the physical structure of their domains, and initializable from existing models.

09.
arXiv (CS.CL) 2026-06-16

VibeThinker-3B: Exploring the Frontier of Verifiable Reasoning in Small Language Models

This technical report introduces VibeThinker-3B, a compact dense model with 3B parameters developed to investigate how far verifiable reasoning can be pushed within a strictly small-model regime. Building upon the Spectrum-to-Signal post-training paradigm, we systematically enhance the model through an optimized pipeline that includes curriculum-based supervised fine-tuning, multi-domain reinforcement learning, and offline self-distillation. Experimental evaluations demonstrate that VibeThinker-3B achieves frontier-level performance on highly demanding verifiable tasks. Specifically, it attains a score of 94.3 on AIME26 (improving to 97.1 with claim-level test-time scaling), an 80.2 Pass@1 on LiveCodeBench v6, and exhibits strong out-of-distribution generalization with a 96.1\% acceptance rate on recent unseen LeetCode contests. This effectively places it in the performance band of first-tier reasoning systems, matching or exceeding flagship models that are orders of magnitude larger, such as DeepSeek V3.2, GLM-5, and Gemini 3 Pro. Furthermore, a score of 93.4 on IFEval confirms that this extreme reasoning enhancement does not compromise strict instruction controllability. Extending our previous 1.5B work, these findings motivate the Parametric Compression-Coverage Hypothesis, which views verifiable reasoning as compressible into compact reasoning cores, while open-domain knowledge and general-purpose competence require broad parameter coverage over facts, concepts, and long-tail scenarios. This perspective suggests that compact models are not merely deployment-efficient substitutes, but a complementary path toward frontier-level performance in parameter-dense capability regimes.

10.
arXiv (CS.LG) 2026-06-11

Triangular-Reference Schrödinger Bridges for Time Series Generation

arXiv:2605.27478v3 Announce Type: replace-cross Abstract: Schrödinger bridges for time series (SBTS) generate synthetic paths by projecting, in relative entropy, a Brownian reference onto the path laws that match the joint distribution of the data on the observation grid. The Brownian reference, however, fixes the quadratic variation of the generated paths, which is restrictive when stochastic volatility, correlated noise, or rank-deficient covariance structures must be reproduced. We introduce "Triangular-Reference Schrödinger Bridges for Time Series" (TR-SBTS), which keeps the entropy-projection backbone of SBTS but replaces the Brownian reference by a triangular, volatility-informed, intervalwise frozen reference on a state augmented with latent covariance descriptors. The construction remains a single entropy projection on the augmented state: the minimiser is the \(h\)-transform of the reference, and on each frozen interval the optimal drift has the logarithmic-gradient form \(b^\star(t,x)=A\,\nabla\log H(t,x)\), intrinsic to the active covariance directions when the frozen covariance \(A\) is degenerate. We prove stability of the frozen approximation and consistency of the associated regularised kernel estimators, describe a reference-aware Nadaraya–Watson implementation of the conditional next-increment law, and evaluate the construction on numerical experiments.

11.
arXiv (CS.LG) 2026-06-19

Global Convergence of Gradient Descent for Score Matching in Gaussian Mixtures via Reverse Fisher Divergence

arXiv:2606.19876v1 Announce Type: new Abstract: The score matching problem is a central training objective in modern generative modeling, diffusion models, fitting unnormalized statistical models, and inverse problems. A standard approach is to minimize the forward Fisher divergence, where the expectation is taken with respect to the teacher distribution. However, recent results show that even in simple Gaussian mixture model settings, this objective can lead to undesirable and initialization-dependent convergence behavior. In this paper, we study an alternative objective: the reverse Fisher divergence, where the expectation is taken with respect to the student distribution. We analyze gradient descent (GD) for fitting Gaussian mixture models and show that this change in the objective leads to significantly better optimization properties. First, when the teacher distribution is a single Gaussian and the student is a Gaussian mixture model with fixed weights and identity covariances, we prove the global convergence of GD from arbitrary initializations. Second, we extend the analysis to the case where the teacher is also a Gaussian mixture model and prove global convergence guarantees under a global random initialization scheme and a $\widetilde{\Omega}(1)$-separation assumption on the target means. In particular, with high probability, each student component converges near its closest teacher component, and we provide conditions under which the student distribution converges in total variation distance. Our proofs rely on a new Lyapunov-based analysis of the gradient descent dynamics, showing that the reverse Fisher divergence has a much more favorable optimization landscape than the forward Fisher divergence.

12.
arXiv (CS.CV) 2026-06-24

EPMF: Efficient Perception-aware Multi-sensor Fusion for 3D Semantic Segmentation

We study multi-sensor fusion for 3D semantic segmentation that is important to scene understanding for many applications, such as autonomous driving and robotics. Existing fusion-based methods, however, may not achieve promising performance due to the vast difference between the two modalities. In this work, we investigate a collaborative fusion scheme called perception-aware multi-sensor fusion (PMF) to effectively exploit perceptual information from two modalities, namely, appearance information from RGB images and spatio-depth information from point clouds. To this end, we project point clouds to the camera coordinate using perspective projection, and process both inputs from LiDAR and cameras in 2D space while preventing the information loss of RGB images. Then, we propose a two-stream network to extract features from the two modalities, separately. The extracted features are fused by effective residual-based fusion modules. Moreover, we introduce additional perception-aware losses to measure the perceptual difference between the two modalities. Last, we propose an improved version of PMF, i.e., EPMF, which is more efficient and effective by optimizing data pre-processing and network architecture under perspective projection. Specifically, we propose cross-modal alignment and cropping to obtain tight inputs and reduce unnecessary computational costs. We then explore more efficient contextual modules under perspective projection and fuse the LiDAR features into the camera stream to boost the performance of the two-stream network. Extensive experiments on benchmark data sets show the superiority of our method. For example, on nuScenes test set, our EPMF outperforms the state-of-the-art method, i.e., RangeFormer, by 0.9% in mIoU. Our source code is available at https://github.com/ICEORY/PMF.

13.
arXiv (CS.LG) 2026-06-11

AsFT: Anchoring Safety During LLM Fine-Tuning Within Narrow Safety Basin

arXiv:2506.08473v4 Announce Type: replace Abstract: Fine-tuning large language models (LLMs) improves performance but introduces critical safety vulnerabilities: even minimal harmful data can severely compromise safety measures. We observe that perturbations orthogonal to the alignment direction - defined by weight differences between aligned (safe) and unaligned models - rapidly compromise model safety. In contrast, updates along the alignment direction largely preserve it, revealing the parameter space as a "narrow safety basin". To address this, we propose AsFT (Anchoring Safety in Fine-Tuning) to maintain safety by explicitly constraining update directions during fine-tuning. By penalizing updates orthogonal to the alignment direction, AsFT effectively constrains the model within the "narrow safety basin," thus preserving its inherent safety. Extensive experiments on multiple datasets and models show that AsFT reduces harmful behaviors by up to 7.60%, improves task performance by 3.44%, and consistently outperforms existing methods across multiple tasks.

14.
arXiv (CS.LG) 2026-06-11

Learning Dynamics Reveal a Hierarchy of Weight-Induced Layerwise Gram Metrics

arXiv:2606.09744v3 Announce Type: replace Abstract: We study feed-forward ReLU networks with fixed readout and quadratic loss. The aim is to rewrite gradient descent not primarily as a dynamics in weight space, but as a collective dynamics closed in terms of fields defined on the training-set space. For a single hidden layer, the weight variables can be eliminated from the activation dynamics, yielding a closed equation for the residuals governed by a collective kernel that factorizes into an input-geometric matrix and a dynamical co-activation matrix. For deeper networks, the residual dynamics retains a clean layer-wise kernel structure. However, from depth three onward, closure requires a hierarchy of weight-induced Gram operators that mediate information transport across layers. Moreover, the conjugate-field dynamics is governed by operators satisfying a backward pullback recursion, of which the weight-induced Gram operators are the first nontrivial instances.

15.
arXiv (CS.LG) 2026-06-16

Task-Error Residual Learning for Real-Robot Five-Ball Juggling

arXiv:2606.16978v1 Announce Type: cross Abstract: For residual learning that refines existing behavior, sample efficiency depends on two things: how much information each rollout returns, and how efficiently the learner uses that information. Reinforcement learning's standard scalar reward carries far less information than the directional task error that defines the task. Random exploration further discards whatever information each rollout returns. Through residual learning with directional task-error supervision and a task error model that drives sample selection, we achieve stable three-, four-, and five-ball juggling on anthropomorphic Barrett WAM arms. Despite planning and controlling through a simple, idealized stack, the system converges from the second attempt. The first attempt drops, after which task error decreases monotonically without further failures. In comparison, five-ball juggling typically takes humans years of practice. We compare residual learners across two ternary axes, the directional information in the learning feedback and the commitment of the analytic prior, spanning Newton-style Jacobian updates, Composite Bayesian Optimization, and stochastic search methods. Both axes prove necessary: neither directional feedback nor an informative prior suffices alone, and the simplest method that combines them, a fixed-Jacobian Newton update, is the most reliable. The learned residual tolerates substantial prior misalignment and degraded joint tracking, affecting mainly convergence speed. The bottleneck for residual learning on real robots is therefore the information content of the supervision signal and how the learner uses it, not the accuracy of the surrounding stack. Video documentation of all experiments is available at https://kai-ploeger.com/residual-juggling.

16.
arXiv (CS.CL) 2026-06-17

From Parasocial Scripts to Dyadic Persistence in Autonomous AI-Agent Communities

While parasocial interactions (PSIs) and parasocial relationships (PSRs) have been studied in conventional media settings, we investigate whether PSI- (colloquial) relational cues also exist in online communities where both sides are autonomous AI agents. We analyze 4,434 posts and 50,338 comments from Moltbook through three theory-based textual indicators: attachment/intimacy language, reciprocity bids, and self-identification to original poster (OP). The combined results across methods based on keyword matching, few-shot large language model (LLM) annotation, and grouped-context LLM annotation reveal that PSI colloquial cues prevail and are strongly associated with OP re-engagement and a reciprocal reply structure. These results are robust across negative controls, nullification, clustered-standard-error re-estimation, and multiple-testing correction. A dyadic persistence test further affirms reciprocity bids aligned with sustained OP-involving mutual recurrence, providing empirical evidence for bridging interaction-level PSI scripts with PSR-consistent repeated dyadic patterns. We interpret the evidence as a behavioral structure in discourse by LLM-enabled agents.

17.
arXiv (CS.CV) 2026-06-24

EPEdit: Redefining Image Editing with Generative AI and User-Centric Design

The demand for image manipulation has seen a significant increase recently. Traditional tools like Photoshop and Capture One, while powerful, require considerable expertise to use effectively. Generative AI has introduced alternative platforms, such as Luminar Neo, Pixlr X, and Canva. However, many of these solutions, including resource-heavy models like Stable Diffusion, often require substantial retraining and fine-tuning, leading to high costs for users. To address these challenges, we introduce Efficient Photo Editor (EPEdit), an application that integrates a robust backend framework with a user-friendly front-end interface. EPEdit supports a wide range of creative image editing tasks, including image generation, object replacement, object removal, background modification, changes in object pose or perspective, region-specific editing, and thematic collection design, all guided by masks and prompts. Users can interact with the system through simple text commands or by marking areas for precise adjustments, making it accessible even to those without technical expertise. At its core, EPEdit leverages zero-shot image editing algorithms based on Stable Diffusion model, removing the need for additional fine-tuning. This approach enables efficient image manipulation and thematic collection creation. User evaluations for tasks of image editing, thematic design, and overall system performance demonstrate that EPEdit outperforms existing solutions, offering a user-friendly, cost-effective solution for comprehensive image editing.

18.
arXiv (CS.CV) 2026-06-16

MVM-IOD: An Industrial Object-Centric Benchmark Dataset for the Evaluation of 3D Reconstruction Methods

3D object reconstruction, and camera pose estimation in industrial applications are challenging tasks, as errors are costly while the computation time is often limited. The complexity of typical industrial objects further complicates these tasks. Most of the existing datasets in this context do not depict realistic industrial scenarios. Therefore, we introduce the Machine Vision Metrology Industrial Object Dataset (MVM-IOD). Images of typical industrial objects are captured systematically, by moving a camera, mounted at the end effector of an industrial robot arm, on a hemisphere around the objects. MVM-IOD contains reference camera poses and reference 3D point clouds, the acquired RGB images of 9 objects and 2 background choices resulting in 18 scenes, which allows evaluation of all image based methods that compute a 3D reconstruction, camera poses, or novel views of a scene. Based on MVM-IOD, we extensively evaluate current SOTA 3D reconstruction and camera pose estimation methods, such as Structure from Motion, Multi-View Stereo, recent feed forward methods (Visual Geometry Grounded Transformer, {\pi}3), and 2D Gaussian Splatting and report our findings as a baseline for future research. The experiments show that capture setups like ours generate out-of distribution images for feed forward methods, leading to suboptimal point clouds and camera poses. However, these out-of-distribution images can be shifted closer to the training distribution by applying simple preprocessing steps. Consequently, in certain industrial applications, feed forward methods should be used with caution.

19.
arXiv (quant-ph) 2026-06-24

Augmenting Imaginary-Time Evolution with Local Geometric Information

arXiv:2606.23934v1 Announce Type: new Abstract: Imaginary-time evolution (ITE) underpins a broad family of algorithms for ground-state preparation in quantum simulation and quantum many-body physics. In these methods, convergence is governed by the energy variance of the instantaneous state, causing the flow to approach the ground state only asymptotically. We introduce an augmented imaginary-time evolution (AITE) framework that replaces the standard gradient flow on the energy landscape with a geometrically informed descent along locally optimal directions, which are identified by exploiting the higher-order statistical structure of the instantaneous energy distribution. The resulting flow strictly outperforms standard ITE throughout the entire evolution and exhibits two qualitatively distinct regimes: a superlinear convergence regime, followed by an extinction regime in which the energy error vanishes exactly at a finite imaginary time, in sharp contrast to the asymptotic exponential decay of ITE. Standard ITE is recovered in the zero-skewness limit of AITE, implying that the acceleration extends naturally across the broader ITE algorithmic family.

20.
bioRxiv (Bioinfo) 2026-06-20

The recount3 Python package for programmatic access to uniformly processed RNA-seq data

The recount3 online resource provides tens of thousands of uniformly processed RNA-seq samples across human and mouse from major sequencing repositories like the Sequence Read Archive. While access to these datasets has traditionally been centered in the R/Bioconductor ecosystem, the growing prominence of Python in bioinformatics and machine learning necessitates native, efficient tooling for Python users. Therefore, we present the recount3 Python package with robust application programming interface (API) and command-line interface (CLI) for discovering, downloading, and materializing recount3 resources. The software orchestrates uniform resource locator (URL) resolution, persistent on-disk caching, and the automatic parsing of data into analysis-ready data structures, including Pandas DataFrames and BiocPy RangedSummarizedExperiment objects. The recount3 Python package drastically lowers the barrier to entry for large-scale utilization of RNA-seq data in Python-based computational pipelines, bridging the gap between massive public transcriptomic data and modern machine learning ecosystems.

21.
arXiv (CS.AI) 2026-06-19

When, Where, and How: Adaptive Binning for Tabular Self-Supervised Learning

arXiv:2606.19827v1 Announce Type: cross Abstract: Medical tabular data are ubiquitous in clinical research, but deep learning for tables remains underexplored because reliable labels often require costly expert adjudication, even though structured clinical variables are routinely available in tabular form. Self-supervised learning can leverage these unlabeled tables, and recent binning-based pretexts offer a promising inductive bias, but existing objectives fix a single global quantile discretization and apply feature-agnostic supervision. We propose Adaptive Binning, a training-adaptive discretization pretext for tabular SSL that couples discretization to learning through a feature-wise coarse-to-fine curriculum. Motivated by the spectral bias of neural networks and the principles of curriculum learning, our method progressively refines discretization per feature upon plateau detection and selects representation-aware splits to jointly improve value-space concentration and representation-space coherence. A heterogeneity-aware objective unifies categorical reconstruction with ordinal supervision for numerical features, and experiments on public medical tabular datasets under unified evaluation protocols show consistent gains for linear probing and fine-tuning without dataset-specific discretization tuning. We further introduce a medical tabular SSL benchmark with standardized protocols to support reproducible progress in this underexplored domain. Our code is available at https://github.com/labhai/Adaptive-Binning.

22.
arXiv (quant-ph) 2026-06-19

Strain- and Electric-Field-Tunable Valley Polarization in Mo0.75V0.25Te2(Mo3VTe8) for Valleytronic Application

arXiv:2606.19954v1 Announce Type: cross Abstract: Valley polarization in 2D TMDs is promising for low-power valleytronic and spin-valley information processing, but time-reversal symmetry in pristine nonmagnetic TMDs keeps the K+ and K- valleys degenerate, limiting device applications. In this work, we investigated the structural stability, electronic properties, and tunable valley polarization of V-alloyed MoTe2 monolayer, Mo0.75V0.25Te2, using first-principles density functional theory (DFT) calculations. Substitutional alloying of MoTe2 with V introduced magnetic exchange interaction, which, together with spin-orbit coupling (SOC), lifted the valley degeneracy at the unequal valleys. The alloyed structure was found to be energetically and dynamically stable due to the absence of imaginary phonon modes. In pristine MoTe2, SOC produced spin splittings of 34.0 meV and 218.9 meV in the conduction bands and valence bands, respectively, but no valley polarization was observed. In contrast, Mo0.75V0.25Te2 exhibited spontaneous valley polarization of 37.3 meV in the conduction band and 78.2 meV in the valence band. The valley polarization was further enhanced by external electric fields and biaxial strain. A transverse electric field along the crystal c axis produced the maximum valley splitting of 132.8 meV in the valence band, whereas biaxial tensile strain increased the valence band valley splitting up to 160.8 meV. The maximum conduction band valley splitting reached 54.4 meV under 2% biaxial compressive strain. These results demonstrated that V alloying, combined with electric-field and strain engineering, provides an effective strategy for achieving large and tunable valley polarization in MoTe2. Thus, Mo0.75V0.25Te2 can be considered a promising 2D platform for tunable valleytronic device applications, such as transistors and sensors.

23.
arXiv (CS.LG) 2026-06-16

Surrogate-Assisted Framework for SI-Compliant Interconnect Design Optimization Using the Earth Mover's Distance

arXiv:2606.15234v1 Announce Type: cross Abstract: This work presents a deterministic, machine-assisted framework for SI-compliant PCB design based on the Earth Mover's Distance (EMD). In contrast to conventional surrogate-based optimization methods that rely on iterative black-box search procedures, the proposed approach follows an interpretable, sequential evaluation strategy. Neural surrogate models are first used to efficiently predict waveform describing features from topology-dependent design parameters. A decision tree then acts as a physically motivated quality gate that identifies SI-compliant waveforms according to predefined SI criteria. Within the resulting valid solution space, the Earth Mover's Distance is employed as a similarity metric to rank candidate designs according to their proximity to an ideal reference signal. This enables not only the deterministic identification of admissible parameter regions but also a transparent prioritization of physically superior solutions without inverse modeling or stochastic search procedures. The methodology is demonstrated using a large-scale set of simulated DDR3 fly-by waveforms. By combining surrogate prediction, interpretable classification, and EMD-based waveform evaluation, the framework provides an explainable and computationally efficient alternative to conventional optimization strategies for supporting PCB development with AI-based methods.

24.
arXiv (CS.CV) 2026-06-17

Contact-Based Fringe Projection Profilometry for High-Resolution 3-D Surface Measurement of Reflective and Transparent Objects

This paper presents a contact-based 3-D surface measurement method based on a Digital Fringe Projection (DFP) system, belonging to the vision-based tactile sensing family pioneered by the commercially successful GelSight sensor. Such sensors have proven effective for robotic fingertip manipulation and contact sensing. However, because GelSight employs photometric stereo with RGB LEDs, it does not measure absolute depth directly but instead infers it by integrating estimated surface gradients, which can accumulate reconstruction errors; in addition, it becomes increasingly difficult to calibrate as the sensing area grows, and its depth accuracy is challenged on highly reflective or transparent objects. To overcome these drawbacks, we propose a fringe-projection-based contact measurement technique that performs triangulation-based 3-D reconstruction on a coated silicone contact surface, providing dense per-pixel surface geometry and full-field 3-D shape measurement over the contact region. By integrating high-accuracy digital fringe projection into the sensor, our approach simplifies calibration over larger areas and enhances depth precision for complex surfaces. Experimental results, including a direct comparison with a GelSight Mini sensor, a sphere-fitting accuracy evaluation, and an uncertainty analysis, confirm that the proposed method significantly improves the accuracy and stability of structured-light-based 3-D measurements, allowing reliable reconstruction of objects with diverse optical properties.

25.
medRxiv (Medicine) 2026-06-15

Modelling the public-health impact of indoor air quality interventions on respiratory virus transmission

Respiratory virus transmission occurs in indoor settings where ventilation, occupancy, and dwell time determine exposure levels. Improving indoor air quality (IAQ) therefore could help reduce disease burden associated with respiratory viruses, yet its population-level impact remains poorly quantified. Here, we develop an individual-based transmission modelling framework that links within-location airborne dynamics to individual infection risk and population-level spread, whilst explicitly incorporating heterogeneity in ventilation and baseline indoor air quality across locations. We use this modelling approach to evaluate IAQ-improving interventions (air-quality interventions or AQIs), using hypothetical endemic and pandemic pathogen archetypes with properties similar to SARS-CoV-2 and influenza, and evaluate how effects on key epidemiological metrics (such as annualized incidence and epidemic final size) depend on AQI coverage, efficacy and allocation strategy. At 20% AQI intervention coverage and 80% efficacy, annualized incidence was reduced by approximately 7.2% for an endemic 'SARS-CoV-2-like' respiratory virus, and 17.0% for an endemic 'influenza-like' virus; at 60% coverage (80% efficacy) the reductions were 26.3% and 56.4%, respectively. Targeting AQI installation to the highest-risk locations outperformed random allocation: for SARS-CoV-2-like transmission, 20% coverage at 80% efficacy cut absolute incidence by 10.8% when targeted versus 7.2% when random; for influenza-like transmission, this comparison was 28.9% versus 17.0%. In epidemic scenarios, random installation at 40% coverage and 60% efficacy reduced final size by 23.7% (influenza-like) versus 6.3% (SARS-CoV-2-like). These results support treating clean indoor air as core public-health infrastructure and prioritising risk-based deployment of IAQ-improving interventions to maximise population-level benefit within budgetary and operational constraints.