Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.CV) 2026-06-11

FreqKD: Frequency-Decoupled Cross-Modal Knowledge Distillation for Infrared Object Detection

Transfer learning from large-scale RGB foundation models to infrared (IR) imagery through knowledge distillation (KD) remains challenging due to fundamental differences in image formation physics. We investigate the spectral structure of the RGB–IR modality gap and observe that feature divergence is not uniform across spatial frequencies: low-frequency components (shape, layout) show greater cross-modal alignment than high-frequency components (texture, fine edges), which reflect modality-specific characteristics. Based on this analysis, we propose FreqKD, a frequency-decoupled distillation framework that applies asymmetric supervision adapted to each band's cross-modal consistency. The method employs strict mean squared error (MSE) on the low-frequency band to preserve shared structural information and a relaxed log-MSE loss (weighted at 0.1) on the high-frequency band to provide edge guidance while tolerating texture differences. Spectral divergence analysis on 500 paired samples shows that high-frequency divergence exceeds low-frequency divergence by a factor of 2.4x on average across all analysed transformer layers. On KAIST multispectral pedestrian detection, FreqKD achieves 64.1 mAP50, improving 2.4 points over the DINOv2 baseline. The learned representation transfers across datasets (FLIR ADAS, +2.1 mAP50), tasks (MFNet segmentation, +1.85 mean intersection-over-union), and architectures (ResNet-50, +1.0 mAP50). Code is available at: https://anonymous.4open.science/r/freq_decoupled_kd-5E5A

02.
arXiv (CS.AI) 2026-06-16

Provenance-Enhanced Statements in Knowledge Graphs

arXiv:2606.15246v1 Announce Type: cross Abstract: Provenance-enhanced statements of the form "according to $X$, $\varphi$" are pervasive in contemporary knowledge graphs, especially in domains where graph content primarily represents claims, interpretations, and hypotheses (capta) rather than observer-independent facts (data). Current provenance models can record who asserted what, but they typically treat provenance as semantically neutral, leaving underspecified how attributed claims relate to factual commitment, to one another, and to reasoning. In this paper we introduce DEC, a framework that interprets provenance predicates as indicators of epistemic stance and groups provenance-homogeneous sets of statements into cognitive worlds. Drawing on cognitive modal logics (doxastic, epistemic, and conjectural), DEC characterizes locality, rationality, and controlled permeation between cognitive worlds and a distinguished factual core ("reality"), thereby enabling principled reasoning over attributed content without collapsing disagreements into inconsistencies. We formalize a DEC interpretation for RDF datasets that is conservative over RDF~1.2 semantics, clarify the role of intensionality and identity (including the Superman paradox), and illustrate the approach on common Semantic Web representations (named graphs, quoted triples/RDF-star, and reification). Finally, we describe our prototype DEC reasoner implemented as a Fuseki dataset module, supporting controlled factualisation and explicit detection of disagreements and delusions.

03.
arXiv (CS.LG) 2026-06-11

Enhancing Spectral Embedding through Robust and Flexible Knowledge Transfer in Electronic Health Records

arXiv:2606.11570v1 Announce Type: cross Abstract: We propose a spectral-based, unsupervised representation learning framework to derive low-dimensional embeddings for clinical concepts and patients in rare disease cohorts from electronic health records, where data are high-dimensional but sample sizes are limited. To overcome this challenge, we incorporate a knowledge matrix extracted from a broader population that shares a partially overlapping subspace with the rare-disease cohort. Our method departs from existing approaches by relaxing restrictive one-to-one signal-alignment assumptions between the latent data matrix and knowledge matrix, allowing more flexible and realistic forms of structured sharing. We introduce a novel two-step spectral embedding procedure: first, we identify and remove irrelevant components from the knowledge matrix; then, we apply a projection-based method to separately recover shared and heterogeneous components. Simulations and an analysis of a real-world multiple sclerosis cohort show that the proposed method outperforms competing approaches, particularly in challenging scenarios where shared signals are weak and only partially aligned, as is common in rare-disease data.

04.
arXiv (CS.CV) 2026-06-18

Clinically Aligned Geometry Constraints for Robust IVUS Vessel Boundary Segmentation

Intravascular ultrasound (IVUS) lumen and external elastic membrane (EEM) segmentation is important for quantitative coronary plaque burden assessment. Errors in lumen or EEM delineation directly propagate to plaque area, plaque burden and geometric measurements. However, standard methods prioritising overlap scores often suffer from boundary drift and topology errors, leading to inaccurate clinical measurements. We present GeoCat, a geometry-consistent network that processes 5-frame IVUS clips using dual Cartesian-polar encoders with cross-domain attention and temporal fusion. A differentiable geometry consistency loss directly supervises clinically relevant descriptors including diameters, orientations, and cross-sectional areas. The model is trained on 12,242 annotated frames from 146 patients acquired with two commercial IVUS systems. We evaluate performance using both segmentation accuracy and plaque-relevant clinical metrics, including Dice/IoU, boundary measures(95HD (mm), ASSD), topology violation rate, and clinical geometry errors (dmax/dmin, angles, and areas). On our dataset, GeoCat achieves a Dice of 0.93, reduces 95HD to 0.14 mm, and lowers topology violations to 1.0%. Importantly, it significantly improves geometric fidelity, yielding diameter errors of 0.13-0.16 mm and angular errors of ~8 degrees, supporting reliable plaque burden quantification.

05.
arXiv (CS.LG) 2026-06-15

Closed-loop discovery of out-of-distribution processing protocols by evolutionary search and uncertainty-aware learning

arXiv:2606.13859v1 Announce Type: cross Abstract: Many materials and chemical systems exhibit history-dependent responses, where functional outcomes are governed not only by final-state variables but by the time-dependent sequence of fields, temperatures, or chemical potentials applied during operation. Discovering new processing protocols is therefore a high-dimensional search problem in which the control variable is an entire waveform or sample history, and conventional strategies either remain confined to conservative interpolative families or become prohibitively measurement intensive. Here, a closed-loop workflow is introduced that couples evolutionary search over a compact waveform representation with uncertainty-aware deep kernel learning to generate, rank, and experimentally validate candidate protocols. Applied to ferroelectric thin films, with the scanning-probe tip-bias waveform as the protocol and the nonlinear electromechanical response as the reward, the workflow discovers waveform families that enhance nonlinearity by de-aging the film. Spatially resolved before/after measurements show that the best-performing waveforms selectively activate pre-existing, weakly pinned domain-wall segments, whereas the worst drive long-range irreversible switching. This framework reframes protocol tuning as out-of-distribution discovery, generalizable to synthesis and annealing trajectories, battery formation protocols, and other high-dimensional control problems.

06.
arXiv (CS.LG) 2026-06-12

Multi-Token Residual Prediction

arXiv:2605.18817v2 Announce Type: replace Abstract: Diffusion Language Models (DLMs) generate text by iteratively denoising masked token sequences, offering a tradeoff between parallelism and quality compared to autoregressive models. In current practice, the number of tokens decoded per step is controlled by a confidence threshold, and quality degrades monotonically as more tokens are denoised per step. We introduce Multi-token Residual Prediction (MRP), a lightweight module that enables dependency-aware multi-token denoising within a single backbone forward pass. MRP exploits a key property of the denoising process: the logit distributions at adjacent denoising steps are remarkably similar. Rather than running the backbone a second time to obtain the next-step logits, MRP predicts the residual between steps from the backbone's hidden states, effectively denoising more tokens per backbone forward at a fraction of the cost. We apply MRP across the two operating regimes of DLM decoding. In the high-quality-low-throughput static denoising regime, MRP serves as a drafter for speculative decoding: its proposals are verified against the backbone, yielding lossless acceleration of up to 1.4x in SGLang. In the low-quality-high-throughput dynamic denoising regime, MRP instead drives a remasking scheme that revokes over-eager reveals, recovering most of the accuracy lost to aggressive low-threshold decoding and improving accuracy by up to 22.6 points on code generation task HumanEval and 17.7 points on reasoning task GSM8K.

07.
arXiv (CS.CL) 2026-06-19

Benchmarking Local LLMs for Natural-Language-to-SQL Querying in Biopharmaceutical Manufacturing: An Empirical Benchmark on Consumer-Grade Hardware

Biopharmaceutical manufacturing organizations operate under regulatory frameworks such as FDA guidance, EU Good Manufacturing Practice (GMP), and the EU AI Act, which can restrict the use of cloud-based artificial intelligence systems. Locally deployed large language models (LLMs) offer a privacy-preserving alternative, but their suitability for pharmaceutical manufacturing tasks remains underexplored. This study evaluates four open-source LLMs (Qwen 2.5 Coder 7B, Llama 3.1 8B, Mistral 7B, and Meditron 7B) deployed locally via Ollama for natural-language-to-SQL generation over a pharmaceutical manufacturing database. A FastAPI-based evaluation platform, PharmaBatchDB AI, was developed using a synthetic Microsoft SQL Server database containing approximately 63,000 records across Batch, Manufacturing Execution System (MES), and Clean-In-Place (CIP) modules. Models were benchmarked on 60 domain-specific natural-language questions using metrics including SQL extraction rate, SQL compliance, factual consistency, ROUGE-L, hallucination rate, throughput, and latency. Qwen 2.5 Coder 7B, Llama 3.1 8B, and Mistral 7B generated SQL for all evaluation tasks, while Meditron 7B failed on nearly all tasks due to context-window limitations and poor SQL generation capability. Llama 3.1 8B achieved the highest SQL compliance, whereas Qwen 2.5 Coder 7B achieved the strongest overall text similarity and factual consistency. Performance differences between the two leading models were not statistically significant. The results show that code-tuned general-purpose LLMs outperform a domain-specific biomedical model on structured query generation for pharmaceutical manufacturing data. Although fully local, GxP-aligned NLQ systems are feasible on consumer hardware, current performance levels still require human oversight and downstream validation for regulated use.

08.
arXiv (CS.CL) 2026-06-17

EngTrace: A Symbolic Benchmark for Verifiable Process Supervision of Engineering Reasoning

Large Language Models (LLMs) are increasingly entering specialized, safety-critical engineering workflows governed by strict quantitative standards and immutable physical laws, making rigorous evaluation of their reasoning capabilities imperative. However, existing benchmarks such as MMLU, MATH, and HumanEval assess isolated cognitive skills, failing to capture the physically grounded reasoning central to engineering, where scientific principles, quantitative modeling, and practical constraints must converge. To enable verifiable process supervision in engineering, we introduce EngTrace, a symbolic benchmark built on 90 parameterized templates, each generating unique, contamination-resistant problem instances, spanning three major engineering branches, nine core domains, and 20 distinct areas, yielding 1,350 test cases that stress-test generalization across diverse physical scenarios. Moving beyond outcome matching, we introduce a verifiable two-stage evaluation framework that uses a tiered protocol to validate intermediate reasoning traces alongside final answers through automated procedural checks and a heterogeneous AI Tribunal. Our evaluation of 27 leading LLMs reveals a distinct trade-off between numeric precision and trace fidelity, identifying a complexity cliff where abstract mathematical pre-training fails to translate into the integrative reasoning required for advanced engineering tasks.

09.
arXiv (CS.CL) 2026-06-16

GRACE: Step-Level Benchmark for Faithful Reasoning over Context

Many reasoning tasks require models to reason over input context, from document-grounded question answering to rule-based deduction. Chain-of-Thought (CoT) prompting produces traces that appear transparent, yet individual steps can silently deviate from the source evidence, even when the final answer is correct. Existing methods detect hallucinations at the response level but fail to identify where in the chain a failure occurs or what type it is. We introduce GRACE, the first human-annotated step-level faithfulness benchmark with a data-driven error taxonomy for context-grounded textual reasoning. GRACE covers CoT traces from 10 models across 4 source datasets, with each step annotated for faithfulness, error category, and natural language explanation. A data-driven taxonomy, discovered bottom-up via unsupervised clustering, organizes failures into two tracks: GRACE-Inference (deductive errors) and GRACE-Grounding (factual grounding errors), with four categories each. The evaluation set is human-annotated and challenging by design. Our experiments reveal substantial headroom for current models. In addition, integrating step-level faithfulness signals into reinforcement learning pipelines improves both downstream accuracy and reasoning reliability.

10.
arXiv (CS.LG) 2026-06-18

The Illusion of Improvement: Reject Inference Strategies in Credit Scoring

arXiv:2606.18479v1 Announce Type: new Abstract: Reject inference methods are widely used to mitigate survival bias in credit scoring, yet their effectiveness remains poorly understood. We systematically evaluate several such methods and uncover a structural failure mode: in a natural retraining cycle, models whose accuracy improves while recall collapses create an illusion of improvement that leads practitioners to believe the system is getting better when, in fact, its rejection quality – the ability to correctly screen out defaulters – is deteriorating. We then propose a controlled exploration strategy that breaks the feedback loop without statistical assumptions: the lender deliberately approves a fraction of rejected applicants and observes their true outcomes. We show that accuracy and rejection quality give opposite recommendations on whether to explore: accuracy favors no exploration, while rejection quality improves with it, confirming that standard evaluation metrics are misleading under selection bias. Even minimal exploration rates (2–5\%) prove sufficient in our experiments to diagnose the severity of the feedback loop at near-zero cost. Our findings are consistent across two machine learning methods and three real-world datasets, and suggest that standard evaluation protocols are inadequate for assessing models trained under survival bias.

11.
arXiv (CS.CL) 2026-06-12

Occupational Prompting Reveals Cultural Bias in Large Language Models

Social roles shape expectations, priorities, and judgments, yet it remains unclear how large language models (LLMs) associate occupational identities with broader cultural value patterns. Prior work used nationality-based cultural prompting to study how LLM responses to value-survey questions align with human cultural benchmarks. In this paper, we extend that framework by replacing cultural prompting with occupational prompting to examine how professional-role cues influence value-survey responses in open-weight LLMs. Using a survey-grounded evaluation pipeline based on questions from the Integrated Values Surveys, we project model responses into the two-dimensional Inglehart–Welzel cultural space. We prompt open-weight LLMs to answer questions under occupational identities such as accountant, teacher, engineer, and nurse, and then analyze how these occupation-conditioned responses are positioned on the cultural map. Our results show that when open-weight LLMs are prompted with occupations rather than national identities, their responses remain within a broadly Western-leaning region of the cultural map. However, different occupations introduce shifts within this region, producing distinct occupational skews. This indicates that occupational prompts are not treated as neutral role labels, but instead elicit structured value patterns. These findings extend survey-based evaluation of cultural bias beyond nationality-based prompting and provide a framework for studying how occupational personas shape value expression in LLMs.

12.
arXiv (CS.AI) 2026-06-17

MapAgent: An Industrial-Grade Agentic Framework for City-scale Lane-level Map Generation

arXiv:2606.04513v2 Announce Type: replace Abstract: Lane-level maps are critical infrastructure for autonomous driving and lane-level navigation, yet constructing and maintaining standardized lane networks for hundreds of cities remains highly labor-intensive. Recent end-to-end vectorized mapping methods can predict lane geometry and topology directly from sensor data, but they typically treat mapping specifications and traffic regulations as implicit, dataset-dependent supervision. Moreover, in complex scenes (e.g., worn or missing markings and occlusions), correct lane configurations are often under-determined by visual evidence alone, making specification violations a major source of human post-editing. We propose MapAgent, an industrial-grade agentic architecture that augments a vectorization backbone for specification-compliant lane-map production. Rather than merely adding an agent loop to map prediction, MapAgent couples backbone perception with explicit specification verification, constraint-aware reasoning, and deterministic map editing under a bounded, verification-driven Judge-Planner-Worker loop. A vision-language Judge diagnoses errors by jointly inspecting visual evidence and draft vectors, while a tool-calling Planner generates minimal corrective edits with post-edit re-validation. To remain scalable for city-scale production, MapAgent is selectively triggered only on tiles with low backbone confidence, adding modest overhead while preserving throughput. Experiments on real-world datasets show consistent gains over strong production baselines, especially in complex and long-tail scenarios. Additionally, MapAgent has been integrated into Baidu Maps, supporting lane-level map generation for over 360 cities nationwide and elevating the overall production automation to over 95%, demonstrating MapAgent's practicality and effectiveness for large-scale lane-level map generation.

13.
medRxiv (Medicine) 2026-06-16

Ranking-optimized survival models can underperform fixed-horizon clinical prediction: a SUPPORT2 reanalysis of machine learning, attending-physician judgment, and the original SUPPORT model at 60- and 180-day mortality

Machine-learning survival models are increasingly proposed for intensive-care mortality prediction and are almost always selected and reported using the concordance index, a ranking metric averaged over follow-up. Yet most bedside decisions hinge on a probability at a specific time, such as 60- or 180-day mortality. We asked whether ranking-optimized models remain competitive at fixed clinical horizons against two reference points clinicians actually rely on: unaided attending-physician judgment and the original 1995 SUPPORT logistic model. Reanalyzing the SUPPORT2 cohort (9,105 critically ill adults from five United States centers, 1989-1994) under a stratified 70/15/15 split, we compared a gradient-boosted survival model, the physician's recorded prognosis, and the 1995 model at 60 and 180 days, alongside several alternative learners. The survival model achieved competitive ranking concordance (0.705) yet underperformed both comparators at fixed horizons: at 60 days its area under the ROC curve was 0.750, against 0.808 for physicians on the matched sample and 0.827 for the 1995 model, a gap that held across eight independent data splits and remained statistically reliable after multiplicity correction. The shortfall was not miscalibration, since post-hoc recalibration left discrimination unchanged, nor limited capacity, since neural networks, a deep ranking model, and two timepoint-aware discrete-time models also failed to close it; replacing the ranking objective with timepoint-matched binary training recovered roughly half the gap, pointing to an objective-horizon mismatch. Discrimination was equitable across sex, race, and age, but leave-one-disease-out validation exposed severe failure for disease groups absent from training, and the physician advantage was conditional on a physician electing to provide an estimate. We recommend reporting timepoint-specific discrimination alongside concordance, timepoint-matched training when fixed-horizon predictions drive care, leave-one-subgroup validation, and distribution-free prediction intervals to support selective deployment.

14.
medRxiv (Medicine) 2026-06-24

Cognitive and Neuroimaging Biomarker Intra-Individual Variability in Alzheimer's Disease

Background Greater cognitive intra-individual variability (IIV) reflects increased heterogeneous performance across cognitive domains and has been linked to a higher risk of Alzheimer's disease (AD). However, it remains unclear whether cognitive IIV is linked to heterogeneous dispersion of regional AD pathology. Hence, we aimed to examine the association between cognitive IIV and AD neuroimaging biomarker IIV. Methods This study included participants with normal cognition (CN) and mild cognitive impairment (MCI) from the Alzheimer's Disease Neuroimaging Initiative. Cognitive IIV was computed as the within-person standard deviation of five domain-specific neuropsychological test z-scores. Four neuroimaging biomarker IIV metrics were similarly derived using regional amyloid-{beta} (n = 1,021), tau (n = 719), cortical thickness (n = 2,148), and combined amyloid-tau-neurodegeneration (ATN, n = 258). Associations between cognitive IIV and each biomarker IIV were evaluated using linear regression models, adjusted for relevant covariates. Results Higher cognitive IIV was associated with greater biomarker IIV across amyloid-{beta} ({beta} = 0.039, SE = 0.014, p = .006), tau ({beta} = 0.196, SE = 0.033, p < .001), cortical thinning ({beta} = 0.036, SE = 0.008, p < .001), and ATN ({beta} = 0.176, SE = 0.043, p < .001). Interaction analyses revealed that the associations of cognitive IIV with tau IIV, cortical thickness IIV, and ATN IIV were stronger in MCI than CN individuals. Significant interactions between cognitive IIV and biomarker positivity status showed that the effect with amyloid-{beta} IIV was attenuated in A- ({beta} = 0.004, SE = 0.014, p = .78) but that the effect with tau IIV remained robust even in T- individuals ({beta} = 0.088, SE = 0.022, p < .001). Conclusion Elevated cognitive IIV is associated with greater heterogeneity in cortical dispersion of AD-related pathology, particularly in prodromal AD and in the presence of abnormal pathology. As a novel measure that captures variation in topographical scattering of AD pathological burden across the cortex, AD biomarker IIV may offer research and clinical utility beyond evaluating absolute biomarker load or thresholds.

15.
arXiv (CS.CL) 2026-06-17

ZeroSyl: Simple Zero-Resource Syllable Tokenization for Spoken Language Modeling

Pure speech language models aim to learn language directly from raw audio without textual resources. A key challenge is that discrete tokens from self-supervised speech encoders result in excessively long sequences, motivating recent work on syllable-like units. However, methods like Sylber and SyllableLM rely on intricate multi-stage training pipelines. We propose ZeroSyl, a simple training-free method to extract syllable boundaries and embeddings directly from a frozen WavLM model. Using L2 norms of features in WavLM's intermediate layers, ZeroSyl achieves competitive syllable segmentation performance. The resulting segments are mean-pooled, discretized using K-means, and used to train a language model. ZeroSyl outperforms prior syllabic tokenizers across lexical, syntactic, and narrative benchmarks. Scaling experiments show that while finer-grained units are beneficial for lexical tasks, our discovered syllabic units exhibit better scaling behavior for syntactic modeling.

16.
arXiv (CS.CV) 2026-06-24

Geometry-Aware Style Transfer in 3D Gaussian Splatting

In this paper, we present a novel geometry-aware style transfer framework for 3D Gaussian splatting (3DGS) that simultaneously transfers appearance attributes and geometric structures. Unlike prior works that primarily focus on color-based stylization and often overlook structural adaptation, our method explicitly incorporates geometry adaptation through a decoupled optimization scheme that alternately updates color and geometry parameters. This strategy alleviates potential interference between color and geometry updates, leading to stable and consistent scene-level geometry transformation. The decoupled optimization is enabled by the proposed geometry-aware contrastive feature matching (GCFM). GCFM integrates RGB, depth, and edge cues into a contrastive objective and is employed in both optimization phases to effectively transfer structural characteristics from style images to Gaussian primitives. Extensive experiments show that our approach achieves superior performance in both qualitative fidelity and quantitative metrics, significantly outperforming existing 3DGS-based stylization methods. Our code is available at \href{https://github.com/oweixx/gast}{https://github.com/oweixx/gast}.

17.
arXiv (CS.AI) 2026-06-17

AI Adoption Across a Multinational Workforce: Sociotechnical Conditions for GenAI Acceptance in Human Resources

arXiv:2606.17887v1 Announce Type: cross Abstract: Generative AI (GenAI) deployment in the workplace is accelerating rapidly. Nevertheless, questions of who adopts, who benefits, and who is left behind and why are still understudied. In this paper, we investigate these dynamics in the context of a multinational tech company transitioning from a legacy Human Resources (HR) search system to a GenAI-supported system, analyzing search log data, survey data (n=25), and ten semi-structured interviews. Our findings show that adoption depended on the fit between the GenAI system's design assumptions and employees' work positionalities (role, spoken language, tenure). Further, we find that employees' trust in GenAI answers was built through source-checking, comparison among systems, and seeking input from colleagues or HR when in doubt. Our contribution is twofold. First, we provide empirical evidence of workplace GenAI adoption during a live organizational transition, showing that adoption is influenced by factors such as situational fit, search literacy, and trust calibration. It is also further shaped by knowledge conditions such as the system's content quality, employee training, and guidance. Second, we translate these findings into design considerations for inclusive deployment and adoption in high-stakes environments such as HR. We argue that organizations should design systems considering the role and context-sensitive benefits they yield to different social groups. They also need to treat the organizational knowledge infrastructure as AI infrastructure to improve the accountability and usability of GenAI systems

18.
arXiv (CS.AI) 2026-06-12

An Explainable AI Assistant for Introductory Programming Education: Improving Feedback Reliability with Instructor-AI Collaboration

arXiv:2606.12425v1 Announce Type: cross Abstract: Active learning is widely recognized as an effective approach for improving learning outcomes in introductory programming courses. However, insufficient instructional support often limits students' access to timely, personalized feedback, which is crucial for mastering foundational programming concepts. Although recent advances in AI, particularly large language models, offer scalable opportunities for feedback, concerns about explainability and reliability remain. In this paper, we present an AI-driven classroom assistant that leverages an explainable AI model to analyze student code, map logical errors to instructor-identified misconceptions, and deliver instructor-authored feedback, thereby grounding reliability in instructor-defined pedagogical knowledge. To evaluate the effectiveness of our framework, we conducted an expert evaluation to examine its alignment with instructor-verified feedback and deployed the system in a classroom setting to assess students' perceptions of its usability. Results indicate that the assistant can provide accurate, instructor-verified feedback to students while fostering a positive experience.

19.
arXiv (CS.LG) 2026-06-25

Low Variance Trust Region Optimization with Independent Actors and Sequential Updates in Cooperative Multi-agent Reinforcement Learning

arXiv:2606.25526v1 Announce Type: new Abstract: Cooperative multi-agent reinforcement learning assumes each agent shares the same reward function and can be trained effectively using the Trust Region framework of single-agent. Instead of relying on other agents' actions, the independent actors setting considers each agent to act based only on its local information, thus having more flexible applications. However, in the sequential update framework, it is required to re-estimate the joint advantage function after each individual agent's policy step. Despite the practical success of importance sampling, the updated advantage function suffers from exponentially high variance problems, which likely result in unstable convergence. In this work, we first analyze the high variance advantage both empirically and theoretically. To overcome this limitation, we introduce a clipping objective to control the upper bounds of the advantage fluctuation in sequential updates. With the proposed objective, we provide a monotonic bound with sub-linear convergence to $\epsilon$-Nash Equilibria. We further derive two new practical algorithms using our clipping objective. The experiment results on three popular multi-agent reinforcement learning benchmarks show that our proposed method outperforms the tested baselines in most environments. By carefully analyzing different training settings, our proposed method is highlighted with both stable convergence properties and the desired low advantage variance estimation. For reproducibility purposes, our source code is publicly available at https://github.com/giangbang/Low-Variance-Trust-Region-MARL.

20.
arXiv (CS.LG) 2026-06-18

Not Just How Much, But Where: Decomposing Epistemic Uncertainty into Per-Class Contributions

arXiv:2602.21160v3 Announce Type: replace-cross Abstract: In safety-critical classification, the cost of failure is often asymmetric, yet Bayesian deep learning summarises epistemic uncertainty with a single scalar, mutual information (MI), that cannot distinguish whether a model's ignorance involves a benign or safety-critical class. We decompose MI into a per-class vector $C_k(x)=\sigma_k^{2}/(2\mu_k)$, with $\mu_k{=}\mathbb{E}[p_k]$ and $\sigma_k^2{=}\mathrm{Var}[p_k]$ across posterior samples. The decomposition follows from a second-order Taylor expansion of the entropy; the $1/\mu_k$ weighting corrects boundary suppression and makes $C_k$ comparable across rare and common classes. By construction $\sum_k C_k \approx \mathrm{MI}$, and a companion skewness diagnostic flags inputs where the approximation degrades. After characterising the axiomatic properties of $C_k$, we validate it on three tasks: (i) selective prediction for diabetic retinopathy, where critical-class $C_k$ reduces selective risk by 34.7\% over MI and 56.2\% over variance baselines; (ii) out-of-distribution detection on clinical and image benchmarks, where $\sum_k C_k$ achieves the highest AUROC and the per-class view exposes asymmetric shifts invisible to MI; and (iii) a controlled label-noise study in which $\sum_k C_k$ shows less sensitivity to injected aleatoric noise than MI under end-to-end Bayesian training, while both metrics degrade under transfer learning. Across all tasks, the quality of the posterior approximation shapes uncertainty at least as strongly as the choice of metric, suggesting that how uncertainty is propagated through the network matters as much as how it is measured.

21.
arXiv (CS.LG) 2026-06-24

A Fast and Effective Method for Euclidean Anticlustering: The Assignment-Based-Anticlustering Algorithm

arXiv:2601.06351v2 Announce Type: replace Abstract: Anticlustering is an NP-hard combinatorial optimization problem that consists of partitioning a set of objects into equal-sized groups called anticlusters such that the objects in the same anticluster are as dissimilar as possible and thereby representative of the entire set of objects. Here we study the case where the dissimilarity metric is the squared Euclidean distance between the respective feature vectors. Applications of Euclidean anticlustering include social studies, cross-validation, creating mini-batches for stochastic gradient descent, and finding balanced K-cut partitions. In particular, machine-learning applications such as mini-batch generation involve million-scale datasets and very large values of K, making scalable anticlustering algorithms essential. We propose a new algorithm, the Assignment-Based Anticlustering (ABA) algorithm, that scales to instances with millions of objects and hundreds of thousands of anticlusters within seconds to minutes, which is far beyond what existing anticlustering methods can manage. We demonstrate here, via an extensive computational study, that our algorithm outperforms existing anticlustering methods in both solution quality and running time. This is so also for anticlustering with categories. For the related problem of balanced K-cut partitioning, our algorithm is superior to the well-known METIS method. The code of our algorithm is available on GitHub.

22.
arXiv (CS.CV) 2026-06-25

SymphoMotion: Joint Control of Camera Motion and Object Dynamics for Coherent Video Generation

Controlling both camera motion and object dynamics is essential for coherent and expressive video generation, yet current methods typically handle only one motion type or rely on ambiguous 2D cues that entangle camera-induced parallax with true object movement. We present SymphoMotion, a unified motion-control framework that jointly governs camera trajectories and object dynamics within a single model. SymphoMotion features a Camera Trajectory Control mechanism that integrates explicit camera paths with geometry-aware cues to ensure stable, structurally consistent viewpoint transitions, and an Object Dynamics Control mechanism that combines 2D visual guidance with 3D trajectory embeddings to enable depth-aware, spatially coherent object manipulation. To support large-scale training and evaluation, we further construct RealCOD-25K, a comprehensive real-world dataset containing paired camera poses and object-level 3D trajectories across diverse indoor and outdoor scenes, addressing a key data gap in unified motion control. Extensive experiments and user studies show that SymphoMotion significantly outperforms existing methods in visual fidelity, camera controllability, and object-motion accuracy, establishing a new benchmark for unified motion control in video generation. Codes and data are publicly available at https://grenoble-zhang.github.io/SymphoMotion/.

23.
arXiv (CS.AI) 2026-06-19

RIVET: Robust Idempotent Voice Attribute Editing

arXiv:2606.19629v1 Announce Type: cross Abstract: Voice attribute editing models modify characteristics such as age and gender while preserving speaker identity. In large-scale speech datasets, however, attribute annotations are often noisy or inconsistent, which can cause conditional generative models to produce unstable edits. In this work, we show that idempotency provides an effective mechanism for improving robustness to noisy labels. An idempotent operator is one for which repeated application does not change the result, i.e., f(f(x)) = f(x). Enforcing this property acts as an implicit regularizer that reduces sensitivity to mislabeled examples. We introduce RIVET, a training framework that incorporates an idempotency objective to improve robustness to label noise. We evaluate RIVET under controlled label noise and on the GLOBE dataset with naturally noisy annotations. RIVET improves editing success and better preserves speaker identity than standard training, showing that idempotency improves robustness in voice editing models.

24.
arXiv (quant-ph) 2026-06-24

q-Askey Deformations of Double-Scaled SYK

arXiv:2605.13956v2 Announce Type: replace-cross Abstract: We construct families of deformations of the double-scaled SYK (DSSYK) model and investigate their bulk interpretation. We introduce microscopic deformations of the SYK model which, after ensemble averaging and in the double-scaling limit, are described by a transfer matrix encoding the recurrence relations of basic orthogonal polynomials in the q-Askey scheme. For certain families of deformations in the semiclassical limit at finite temperature, the chord number (encoding Krylov complexity) corresponds to the length of an Einstein-Rosen bridge connecting an End-Of-The-World brane to an anti-de Sitter asymptotic boundary. By increasing one of the deformation parameters, the models eventually exhibit discrete energy levels, signaling a new geometric transition in sine dilaton gravity. Via the SYK-Schur duality, Krylov complexity also admits a representation-theoretic interpretation as the spread of the SU(2) spin in the index of an $\mathcal{N}=2$ SU(2) gauge theory. We study the operator algebras of the deformed theories. The algebras can be type II$_1$ or type I$_\infty$ factors, depending on the operators that are included. The entanglement entropy between the type II$_1$ algebras for a pure state manifests as an extremal surface through the Ryu-Takayanagi formula. We discuss connections between our results and the emergence of baby universes in the bulk.

25.
arXiv (CS.CL) 2026-06-12

M\"OVE: A Holistic LLM Benchmark for the German Public Sector

We present M\"OVE (Modelle für die \"Offentliche Verwaltung Evaluieren), a holistic benchmark for evaluating large language models (LLMs) in the context of the German public sector. While LLMs are increasingly adopted in public administration, model selection remains largely ad hoc, and existing benchmarks offer limited guidance: they are predominantly English-centric, US-centric in content, and focus exclusively on task performance. M\"OVE addresses these gaps by evaluating 39 models across two complementary dimensions. Performance criteria cover summarization, question answering, and topic extraction. Governance criteria assess hallucination tendencies, energy consumption, provider transparency, and alignment with German constitutional values and knowledge about positions by German political parties. In total, we utilize ten German-language datasets, including gold- and silverstandard datasets that we constructed to reflect public-administration domains. We employ a multi-metric evaluation strategy combining classical NLP metrics, embedding-based methods, and LLM-as-a-judge approaches. Our results show that no single model dominates across all criteria: top performers differ between tasks, and model size alone is a poor predictor of quality. We further evaluate the benchmark itself, analyzing its statistical precision, LLM judge reliability, the impact of our private datasets on model rankings, the sensitivity of our results to prompt formulation, and the validity of our energy consumption estimates. M\"OVE is designed as a living benchmark under active development; results are publicly available at https://moeve.bundesdruckerei.de/.