Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (quant-ph) 2026-06-16

Non-perturbative CPMG scaling and qutrit-driven breakdown under compiled superconducting-qubit control: a single-qubit study

Authors:

arXiv:2603.29525v3 Announce Type: replace Abstract: Decoherence in superconducting qubits arises from both multilevel dynamics and structured environmental noise, yet perturbative models cannot capture all resulting signatures. Here, EmuPlat couples instruction-set-architecture-level waveform generation to the hierarchical equations of motion HEOM under $1/f$ non-Markovian pure dephasing. In the resulting non-perturbative regime – where filter-function predictions become quantitatively uninformative – CPMG scaling of a three-level superconducting transmon yields one calibration result, two physical findings, and one structural null. Y-CPMG exhibits axis-dependent scaling-law breakdown – non-monotonic decoherence, partial coherence revival, and pronounced X–Y population asymmetry ($0.204$ vs ${

02.
arXiv (CS.AI) 2026-06-11

Inside the Latent Flow: Causal Deciphering of Attention Dynamics in Audio Separation Foundation Models

arXiv:2606.10046v2 Announce Type: replace-cross Abstract: Flow-matching transformers achieve strong audio separation, yet their attention dynamics are opaque. We adapt established causal-intervention principles into a deterministic, inference-time probing protocol for SAM Audio. Orthogonal probing uncovers a dual-pathway text-conditioning mechanism: additive injections control semantic identity, while cross-attention refines acoustic structure. We observe an asynchronous layerwise convergence: stable layers build temporal scaffolds early, whereas fast layers continue resolving artifacts during sampling. The model also attenuates temporal segmentation cues to maintain continuous-flow stability. Using these insights, we propose Layer-Selective Attention Caching (LSAC), a training-free acceleration method that caches attention in stable layers. Across acoustic complexities, LSAC cuts self-attention computation by about ~25% with negligible quality loss and yields up to 6.7x higher quality retention than naive step reduction.

03.
arXiv (CS.CV) 2026-06-11

Active Sampling for Ultra-Low-Bit-Rate Video Compression via Conditional Controlled Diffusion

Diffusion models provide a powerful generative prior for perceptual reconstruction at ultra-low bitrates, but effective video compression requires controlling the generative process using highly compact conditioning signals. In this work, we present ActDiff-VC, a diffusion-based video compression framework for the ultra-low-bitrate regime. Our method partitions videos into variable-length segments, transmits keyframes only when needed, and summarizes temporal dynamics using a compact set of tracked point trajectories. Conditioned on these sparse signals, a conditional diffusion decoder synthesizes the remaining frames, enabling perceptually realistic reconstruction under severe rate constraints. To support this design, we introduce two mechanisms: content-adaptive keyframe selection and budget-aware sparse trajectory selection, which together enable compact yet effective conditioning for generative reconstruction. Experiments on the UVG and MCL-JCV benchmarks show that ActDiff-VC achieves up to 64.6\% bitrate reduction at matched NIQE, improves KID by up to 64.6\% and FID by up to 37.7\% at comparable bitrates against strong learned codecs, and delivers favorable perceptual rate–distortion trade-offs relative to learned and diffusion-based baselines in the ultra-low-bitrate regime.

04.
arXiv (CS.AI) 2026-06-19

Computational Identifiability

arXiv:2606.19361v1 Announce Type: cross Abstract: Identification conditions describe the computability of a target query or parameter of interest as a function of the type and amount of information available. In causal identification, this information is often expressed in the form of a causal graph, and data are observed or collected for some subset of variables in the graph. Target queries may be for a single effect alone or for a class of effects in a given model. The derivation of an identification algorithm then defines mathematically the process by which the desired causal effect(s) can be uniquely determined, theoretically, in expectation. Identifiability in expectation, or 'theoretical identifiability,' generally assumes asymptotic properties, infinite data, or other mathematically idealized conditions. In this paper, we explore a fundamental distinction between this theoretical, idealized notion of identifiability and a proposed alternative that is computation-bound. The framework we propose - 'computational identifiability' - is to instead define a finite computational search procedure for an empirical estimator. If this process finds an estimator empirically, within a desired error tolerance, then identifiability is satisfied, conditional on the specified assumptions of the search (i.e., a prior distribution over the parameters) and conditional on the search procedure itself. Through several experiments, we demonstrate how this framework allows us to answer fine-grained, practical identification questions, such as identification with small finite samples, with ambiguous graphical criteria, with mixed observational-interventional data, and across counterfactual data and estimands. Code is available at https://github.com/lbynum/metadentify.

05.
arXiv (CS.CV) 2026-06-19

OncoReg: Medical Image Registration for Oncological Challenges

In modern cancer research, the vast volume of medical data generated is often underutilised due to challenges related to patient privacy. The OncoReg Challenge addresses this issue by enabling researchers to develop and validate image registration methods through a two-phase framework that ensures patient privacy while fostering the development of more generalisable AI models. Phase one involves working with a publicly available dataset, while phase two focuses on training models on a private dataset within secure hospital networks. OncoReg builds upon the foundation established by the Learn2Reg Challenge by incorporating the registration of interventional cone-beam computed tomography with standard planning fan-beam CT images in radiotherapy. Accurate image registration is crucial in oncology, particularly for dynamic treatment adjustments in image-guided radiotherapy, where precise alignment is necessary to minimise radiation exposure to healthy tissues while effectively targeting tumours. This work details the methodology and data behind the OncoReg Challenge and provides a comprehensive analysis of the competition entries and results. Findings reveal that feature extraction plays a pivotal role in this registration task. A new method emerging from this challenge demonstrated its versatility, while established approaches continue to perform comparably to newer techniques. Both deep learning and classical approaches still play significant roles in image registration, with the combination of methods, particularly in feature extraction, proving most effective.

06.
arXiv (quant-ph) 2026-06-11

Large Fluctuations in Open Quantum Systems

arXiv:2606.11822v1 Announce Type: new Abstract: We study statistics of atypical measurement outcomes in the steady states of driven open quantum systems. In equilibrium, the probability distribution over the phase space, as encoded in, e.g., the Wigner function, is analytic in the phase-space coordinates. We show that this property is generically lost in driven dissipative systems: their {\it large-deviation function} develops lines and surfaces across which its derivatives are discontinuous. As an illustrative example, we consider a parametrically driven Kerr oscillator coupled linearly and/or nonlinearly to a dissipative bath. Rare fluctuations in the amplitude and phase of the induced oscillations are governed by semiclassical instanton trajectories of the corresponding Keldysh-Lindblad action. We demonstrate that a given fluctuation can be realized through multiple distinct instanton trajectories. The competition between these trajectories leads to abrupt switching of the dominant instanton and, consequently, to non-analytic features in the large-deviation function.

07.
arXiv (quant-ph) 2026-06-11

Collective neutrino oscillations: Many-body non-forward effects and non-classicality

arXiv:2606.12404v1 Announce Type: cross Abstract: Neutrino evolution in dense astrophysical environments is typically described either within a quantum kinetic framework, which neglects the build-up of multi-body correlations, or through simplified many-body calculations that allow significant entanglement to develop. In this work, we compare these two approaches in a simple neutrino-gas configuration, with particular emphasis on the role of non-forward scattering processes. These effects are incorporated either through a collision term in the kinetic description, or by considering the full neutrino-neutrino many-body Hamiltonian. We highlight differences between the two descriptions in both their characteristic timescales and asymptotic behavior. Motivated by the natural suitability of quantum computing for many-body calculations, we further investigate the non-classicality of neutrino evolution, discussing Trotter error scaling, along with the associated costs of constructing quantum circuits in terms of entangling gates and non-Clifford gates. We find that the resources needed for neutrino many-body evolution are on the low end of typical high-energy physics problems and on the mid to high end with respect to quantum chemistry problems. For the full Hamiltonian, resource requirements increase relative to the truncated version. We emphasize the importance of efficient fermion-to-qubit encodings, which are essential for reducing the substantial computational resources required for such simulations.

08.
arXiv (CS.CV) 2026-06-18

Vines-DB: An RGB image dataset for multi-species ornamental vine segmentation

The Vines-DB dataset contains 1,218 original high-resolution RGB images of seven ornamental vine species collected under field conditions at the Utah Agricultural Experiment Station's Greenville Research Farm in Logan, Utah, USA. The dataset was generated from 168 individual vine plants that were transplanted in 2022 and photographed repeatedly across multiple months during the 2023 and 2024 growing seasons (July-October). Images were captured with an iPhone 16 Pro equipped with a 48 MP camera between 10:00 AM and 12:00 PM under daylight. Vines were grown on 1.2m x 2.4m trellises and photographed from a distance of 1m against black or white Styrofoam backdrops to improve contrast and reduce background noise. The dataset includes Akebia quinata, Campsis radicans, Hydrangea anomala petiolaris, Lonicera x heckrottii, Campsis x tagliabuana 'Madame Galen', Parthenocissus quinquefolia, and Wisteria floribunda. All original images were manually annotated in Roboflow by trained annotators to produce polygon-based instance segmentation masks for eight classes, including seven species and background. After preprocessing and data augmentation, the working dataset was expanded to 2,307 images for model development and evaluation. The augmented dataset was divided into 2,019 training images, 192 validation images, and 96 test images using stratified sampling to maintain balanced representation. Vines-DB supports the development and evaluation of deep learning models for multi-class instance segmentation in precision horticulture and urban ecology. The dataset enables applications such as automated canopy cover estimation, species identification, and scalable field phenotyping. In addition, repeated monthly imaging of the plants captures temporal variation in canopy development and plant appearance, increasing the dataset's utility for segmentation benchmarking under realistic field conditions.

09.
arXiv (CS.CV) 2026-06-16

Ellipse Meets Bit-Planes: A Novel Approach to RNFL based Glaucoma Detection Using Advanced Image Processing and Deep Learning

This work proposes an integrated pipeline for automatic glaucoma detection method from easily available colour fundas images based on an adaptive algorithm for ellipse-based polar transformation, to enhance the analysis of the Retinal Nerve Fiber Layer (RNFL) as the primary biomarker for observing glaucomatous changes, regardless of optic disc and macula position. Utilizing this transformation, we introduce two distinct frameworks tailored to different operational needs. The first framework, a deep learning-inspired feature fusion approach, achieves a 99.3% detection rate, ideal for settings where high precision is essential, despite higher computational demands. The second framework employs a novel image-processing algorithm based on bit-plane slicing, offering 92.31% accuracy and optimized for environments requiring rapid inference with minimal resource consumption. Both frameworks provide scalable and cost-effective solutions for early glaucoma detection. This study highlights the potential of RNFL-based diagnostic tools in addressing the global challenge of glaucoma, particularly in underserved regions.

10.
arXiv (CS.LG) 2026-06-17

Verified Detection and Prevention of Concurrency Anomalies in Multi-Agent Large Language Model Systems

Authors:

arXiv:2606.17182v1 Announce Type: new Abstract: Multi-agent LLM systems share state through memory stores, vector indices, and tool registries. We model such sharing as long-running read-generate-write operations under deterministic-generation semantics – the regime durable-execution engines enforce by deterministic replay – and formalize four concurrency anomalies in TLA+: stale-generation, phantom-tool, causal-cascade, and tool-effect reordering, structural analogues of classical isolation anomalies, each with a TLC counter-example. The exclusion lattice over these anomalies is trivial; the contribution is the mechanically verified realizability and strict separation of one maximal chain within it, $L_0 \subsetneq \cdots \subsetneq L_4$, to our knowledge the first machine-checked consistency hierarchy for such runtimes. A development of 274 Verus obligations (zero assume, zero admit; trust base: two structural axioms and a mutex correspondence) proves the detectors sound and complete against the specifications and each runtime its avoidance set. Three deployed Rust runtimes realize L0-L1 (pessimistic locking, serializable snapshot isolation, default-SI), each verified against stale-generation and refined to its state machine; L2-L4 are exec-mode-verified with dependency-free prevention twins (A3, A6, A2: 0/1000 versus 1000/1000), and L2 is run live across three model families (A3 prevented in all 120 retracted sessions). We reproduce a silent lost update in ByteDance's deer-flow, formalizing its fix as a verified $L_0 \to L_1$ refinement, and exhibit tool-effect reordering in LangGraph's ToolNode on unmodified output, removed by an L3 commit-order sequencer. The verified detector, refinements, and realizability artifacts are the contribution; the phenomena and lattice are classical.

11.
arXiv (CS.AI) 2026-06-16

Automating Low-Risk Code Review at Meta: RADAR, Risk Calibration, and Review Efficiency

arXiv:2605.30208v2 Announce Type: replace-cross Abstract: AI-assisted coding tools have altered software production. At Meta, significant lines of code per human-landed diff grew by 105.9% year over year and per-developer diff volume rose 51%, with agentic AI responsible for over 80% of that growth. Meanwhile, the share of diffs receiving timely review has declined, exposing a widening gap between code supply and reviewer bandwidth. We ask three questions that progress from feasibility through calibration to impact: (1) can risk-stratified automation operate at scale across diverse organizations, (2) how does tuning the risk threshold affect the trade-off between automation yield and safety, and (3) to what extent does automated review reduce end-to-end latency for AI-generated changes? We deployed RADAR (Risk Aware Diff Auto Review), a multi-stage funnel that classifies each diff by authorship and source type, applies eligibility gates, static heuristics, a machine-learned Diff Risk Score, LLM-based Automated Code Review, and deterministic validation before landing qualifying changes. We evaluate RADAR through telemetry covering 535K+ RADAR-reviewed diffs, observational before-after comparisons for policy changes, and difference-in-differences analysis of efficiency outcomes. RADAR has reviewed 535K+ diffs and landed 331K+. Relaxing the Diff Risk Score threshold from the 25th to the 50th percentile increased the approve rate to 60.31%. The revert rate for RADAR-reviewed diffs is 1/3 that of non-RADAR diffs, and the Production Incident rate is 1/50 that of non-RADAR diffs. RADAR reduces median time to close by over 330% and median diff review wall time by 35%. Risk-aware layered automation can materially reduce review bottlenecks created by AI-driven code growth without compromising production safety.

12.
medRxiv (Medicine) 2026-06-22

Building accessible resources to empower communities: the case of the Lupus Mexican Registry

Motivation: Although SLE data in Latin America is increasing, clinical datasets remain difficult to access and interpret, highlighting the need for accessible tools that support data-driven precision medicine, citizen science, and public health initiatives. Results: We developed a user-friendly platform that enables us to explore LupusRGMX data through interactive queries, report generation, statistical modeling, and comprehensive insights. This resource supports community-oriented research, improves the visibility of underrepresented populations in lupus research, and provides a useful tool to enhance data accessibility. Availability and implementation: Developed in R using Shiny and bslib for interactive visualization and interface design. Available at https://github.com/NeuroGenomicsMX/Lupus_App_2.0 and https://lupusrgmx.liigh.unam.mx/shiny/lupus/

13.
arXiv (CS.LG) 2026-06-12

GenAutoML: An Agentic Framework for Dynamic Architecture Generation and Optimization in Time-Series Analysis

arXiv:2606.05860v2 Announce Type: replace Abstract: Designing neural architectures for time-series forecasting and anomaly detection remains a resource-intensive task that often requires substantial domain expertise. Traditional Automated Machine Learning (AutoML) systems typically rely on static, predefined search spaces, limiting their ability to adapt to diverse data characteristics. We present GenAutoML, an agentic framework that leverages Large Language Models (LLMs) as neural architects to bridge natural-language requirements and executable PyTorch implementations. The framework incorporates a Sandboxed Reflection Loop for autonomous code refinement and a Signature-Aware Runtime that enforces architectural consistency and execution safety. To improve robustness under non-stationary conditions, we further introduce a Dynamic Reversible Instance Normalization (Dyn-RevIN) wrapper. Experiments on the ETTh1, ETTm1, and Weather benchmarks demonstrate that GenAutoML can dynamically generate task-specific neural architectures tailored to dataset characteristics. Among the generated models, WaveInterferenceNet achieves inference latency below 0.01 ms per sample while maintaining competitive predictive performance. By emphasizing computational efficiency, architectural adaptability, and stable optimization behavior, GenAutoML enables the creation of ultra-lightweight neural networks suitable for resource-constrained and latency-sensitive Edge AI deployments.

14.
arXiv (CS.AI) 2026-06-12

Under What Conditions Can a Machine Become Genuinely Creative?

Authors:

arXiv:2606.13196v1 Announce Type: new Abstract: Recent AI systems can generate texts, software architectures, hypotheses, designs, and scientific workflows that appear creative. This paper asks under what conditions a machine can become genuinely creative, and how human agency can be preserved within shared cognitive and creative environments. It develops a requirement framework derived from Designics, the science of meaning-bearing intentional change. The paper argues that genuine machine creativity should not be defined by output novelty, current performance, or transient architecture alone. Instead, creativity is understood as the structural transformation of incomplete situations through recursive intervention dynamics. On this view, it depends on ten requirements: environment representation, scoped perception, conflict identification, intervention capability, consequence observation, knowledge and environment update, rescoping, local-to-global unfolding, value-based scoping, and human-AI co-living. These are organized through the three laws of Designics: perception, conflict, and capability. The paper illustrates the computational tractability of these requirements through selected cyber-physical and cyber-biological studies, including recursive element extraction, autonomous mesh generation, and neurophysiological and workload analysis. It then treats open-ended systems, automated discovery frameworks, self-modifying agents, foundation models, and agentic workflows as pressure cases: they demonstrate powerful generative means but do not by themselves establish genuine machine creativity. Finally, the paper argues that proactive AI ethics is internal to genuine machine creativity rather than an after-the-fact filter. Value-based scoping and human-AI co-living must shape how creative machines perceive environments, identify conflicts, select interventions, observe consequences, update knowledge, and rescope future action.

15.
arXiv (CS.AI) 2026-06-17

LLM-Aided Joint Secrecy Precoding and Trajectory for RSMA-Based Heterogeneous UAV Networks

arXiv:2507.17188v3 Announce Type: replace-cross Abstract: This paper investigates secure communications in rate-splitting multiple access (RSMA) enabled heterogeneous UAV networks, where multiple UAVs collaboratively serve ground terminals in the presence of eavesdroppers. By jointly considering secrecy rate maximization and propulsion energy consumption minimization, we formulate a multi-objective optimization problem involving UAV trajectory design, service association, power allocation, and secrecy precoding under mobility, collision-avoidance, service-capacity, and communication constraints. The formulated problem is highly non-convex due to the coupling among UAV trajectories, RSMA transmission variables, and secrecy constraints.To address the resulting non-convex and highly coupled optimization problem, we propose a hierarchical optimization framework. The inner layer uses a semidefinite relaxation (SDR)-based S2DC algorithm combining penalty functions and difference-of-convex (D.C.) programming to solve the secrecy precoding problem with fixed UAV positions. The outer layer introduces a Large Language Model (LLM)-guided heuristic multi-agent reinforcement learning approach (LLM-HeMARL) for trajectory optimization. LLM-HeMARL efficiently incorporates LLM-generated expert heuristic policy, enabling UAVs to learn energy-aware, security-driven trajectories without the inference overhead of real-time LLM calls. The simulation results show that our method outperforms existing baselines in secrecy rate and energy efficiency, with consistent robustness across varying UAV swarm sizes and random seeds.

16.
arXiv (CS.AI) 2026-06-19

Speeding up the annotation process in semantic segmentation industrial applications

arXiv:2606.19934v1 Announce Type: cross Abstract: Current machine learning models commonly require large and well-annotated datasets. However, the annotation process often becomes a bottleneck, with increased complexity leading to higher chances of human errors. Within this context, our goal in this paper is to leverage unsupervised algorithms to improve data annotation efficiency for complex semantic segmentation problems in industrial materials science. Previous research has quantified labeling time and others explored unsupervised methods. However, to the best of our knowledge, this is the first study to quantify how much unsupervised algorithms accelerate the labeling process. We aim to validate the extent to which this laborious process can be accelerated, focusing on semantic segmentation tasks that involve annotating each pixel of high-resolution images, such as the microstructure characterization challenge in materials science. Specifically, we demonstrate that by using unsupervised computer vision algorithms, the time required for the labeling process can be reduced from 170 hours to 37 hours, achieving an approximate reduction of 78\%. The dataset we work with includes large images of dimensions 1280x959 and 960x703, which further increases the complexity of the annotation task. Despite these challenges, we create and share the largest public steel microstructure segmentation dataset to date, available under MIT License with permanent DOI, contributing a fully annotated, high-resolution dataset to the field. Additionally, this is the first work to compare the labeling time from scratch (a common approach in previous studies) to the labeling time when using these unsupervised algorithms as a pre-annotation step. Furthermore, we provide a Deep Learning model trained on this dataset, validated by field experts, and deployed in an industrial setting, serving as an initial benchmark for this public dataset.

17.
arXiv (quant-ph) 2026-06-12

Influence-solvability: a systematic theory of $(1+1)D$ solvability and its application to brickwork circuits

arXiv:2606.12538v1 Announce Type: cross Abstract: `Solvable' circuits, such as dual unitaries and its generalisations, have arisen as paradigmatic examples of tractable chaotic non-equilibrium dynamics, both in classical and quantum systems. However, while increasingly more complicated sufficient conditions have been proposed, a systematic theory classifying and understanding general features of solvable circuits is missing. We develop such a theory by introducing influence-solvable circuits, a class of $(1+1)D$ circuits whose influence matrix, which represents the `bath' generated by its own evolution, is given by a uniform MPS with finite bond-dimension $\chi$. This property allows for efficient computation of subsystem dynamics and essentially contains all known examples of solvable circuits. We derive a set of necessary and sufficient local conditions by using a version of the fundamental theorem of MPS for open boundary conditions. Next we apply our theory to brickwork circuits with $\chi=1$ influence-solvability and perform a systematic classification of classical brickwork circuits with local dimension up to $d=3$ and quantum brickwork circuits with $d=2$. Our search reveals new solvable circuits that are not captured by known solvability conditions.

18.
arXiv (CS.CL) 2026-06-18

MORTAR: Multi-turn Metamorphic Testing for LLM-based Dialogue Systems

With the widespread application of LLM-based dialogue systems in daily life, quality assurance has become more important than ever. Recent research has successfully introduced methods to identify unexpected behaviour in single-turn testing scenarios. However, multi-turn interaction is the common real-world usage of dialogue systems, yet testing methods for such interactions remain underexplored. This is largely due to the oracle problem in multi-turn testing, which continues to pose a significant challenge for dialogue system developers and researchers. In this paper, we propose MORTAR, a metamorphic multi-turn dialogue testing approach, which mitigates the test oracle problem in testing LLM-based dialogue systems. MORTAR formalises the multi-turn testing for dialogue systems, and automates the generation of question-answer dialogue test cases with multiple dialogue-level perturbations and metamorphic relations (MRs). The automated MR matching mechanism allows MORTAR more flexibility and efficiency in metamorphic testing. The proposed approach is fully automated without reliance on LLM judges. In testing six popular LLM-based dialogue systems, MORTAR reaches significantly better effectiveness with over 150\% more bugs revealed per test case when compared to the single-turn metamorphic testing baseline. Regarding the quality of bugs, MORTAR reveals higher-quality bugs in terms of diversity, precision and uniqueness. MORTAR is expected to inspire more multi-turn testing approaches, and assist developers in evaluating the dialogue system performance more comprehensively with constrained test resources and budget.

19.
arXiv (CS.AI) 2026-06-16

An Integrated System for Real-Time Student Assessment and Career Guidance Using Neural Networks in Computing Disciplines

arXiv:2606.15831v1 Announce Type: new Abstract: Many undergraduate students in Computer Science (CS) and Software Engineering (SWE) struggle to identify suitable career paths, particularly when their academic performance, abilities, and interests do not fully align. To address this issue, this study proposes an AI-driven Student Assessment and Career Prediction System that integrates a Career Guidance Expert (CGE) system with a Web-Based Student Assessment (WBSA) platform. Within the integrated framework, CGE enhances personalized career recommendations using AI while also assisting students after graduation in identifying suitable jobs, research domains, and higher study opportunities aligned with their skills and interests. The WBSA platform further strengthens interaction between students and faculty through assessments, personalized tasks, mentorship activities, and a secure real-time chat application. The CGE system employs a Multilayer Perceptron (MLP) model trained on real-world academic and extracurricular data collected using the snowball sampling method from the students of universities, achieving a validation accuracy of 94.71% in predicting personalized career paths. A pre-survey was conducted across universities to evaluate the proposed model before deployment. The WBSA system was developed as a modern web application using technologies such as Node.js, Next.js, and PostgreSQL to ensure scalability, responsiveness, and secure data management. The overall system is supported by a secure cloud-based infrastructure, the platform provides reliable performance while assisting graduates to select suitable career path in IT sector. In addition, a post-survey involving both students and faculty was conducted to gather feedback and further improve the overall effectiveness and usability of the system.

20.
arXiv (CS.CV) 2026-06-16

GOOSE-M2F: Adapting Mask2Former for High-Fidelity, Long-Tailed Fine-Grained Semantic Segmentation in Unstructured Outdoor Terrain

We present GOOSE-M2F, a task-specific adaptation of Mask2Former for the GOOSE 2D Fine-Grained Semantic Segmentation (FGSS) Challenge at ICRA~2026. The GOOSE benchmark spans 64 fine-grained classes across unstructured outdoor terrain with a severely long-tailed distribution, where rare classes occupy fewer than 50 pixels per image. We extend the Swin-Large Mask2Former baseline with three targeted contributions: (1)200 Object Queries to eliminate representational saturation; (2)a Feature Refinement Module (FRM) combining ASPP-lite and CBAM dual-attention; and (3)an Auxiliary Supervision Head that delivers direct per-pixel gradients for rare classes. A multi-stage training strategy pairs Distribution-Balanced loss, Rare-Class Copy-Paste augmentation, dynamic IoU-aware re-weighting, and EMA. At inference, a dense sliding-window engine with 2D Gaussian kernel blending and 4-scale TTA adds +10.57\%. GOOSE-M2F achieves 70.08\% Official Composite mIoU (63.55\% fine, 76.61\% coarse), placing 3rd on the GOOSE 2D FGSS leaderboard. Code and trained models are publicly available at: \href{https://github.com/Aditya-Lingam-9000/GOOSE-M2F}{Github GOOSE-M2F Code} and \href{https://huggingface.co/XYZ9843/GOOSE-M2F}{Hugging Face GOOSE-M2F}.

21.
arXiv (CS.AI) 2026-06-19

Policy-Embedded Graph Expansion: Networked HIV Testing with Diffusion-Driven Network Samples

arXiv:2601.16233v2 Announce Type: replace-cross Abstract: HIV is a retrovirus that attacks the human immune system and can lead to death without proper treatment. In collaboration with the WHO and the University of Witwatersrand, we study how to improve the efficiency of HIV testing with the goal of eventual deployment, directly supporting progress toward UN Sustainable Development Goal 3.3. While prior work has demonstrated the promise of intelligent algorithms for sequential, network-based HIV testing, existing approaches rely on assumptions that are impractical in our real-world implementations. Here, we study sequential testing on incrementally revealed disease networks and introduce Policy-Embedded Graph Expansion (PEGE), a novel framework that directly embeds a generative distribution over graph expansions into the decision-making policy rather than attempting explicit topological reconstruction. We further propose Dynamics-Driven Branching (DDB), a diffusion-based graph expansion model that supports decision making in PEGE and is designed for data-limited settings where forest structures arise naturally, as in our real-world referral process. Experiments on real HIV transmission networks show that the combined approach (PEGE + DDB) consistently outperforms baselines (e.g., 17.3% improvement in discounted reward and 15.4% more HIV detections with 25% of the population tested) and explore key tradeoffs that drive solution quality.

22.
arXiv (CS.LG) 2026-06-16

Tight Bounds for Logistic Regression with Large Stepsize Gradient Descent in Low Dimension

arXiv:2602.12471v2 Announce Type: replace Abstract: We consider the optimization problem of minimizing the logistic loss with gradient descent to train a linear model for binary classification with separable data. With a budget of $T$ iterations, it was recently shown that an accelerated $1/T^2$ rate is possible by choosing a large stepsize $\eta = \Theta(\gamma^2 T)$ (where $\gamma$ is the dataset's margin) despite the resulting non-monotonicity of the loss. In this paper, we provide a tighter analysis of gradient descent for this problem when the data is two-dimensional: we show that GD with a sufficiently large learning rate $\eta$ finds a point with loss smaller than $\mathcal{O}(1/(\eta \gamma^2 T))$, as long as $T \geq \Omega(n/\gamma + 1/\gamma^2)$, where $n$ is the dataset size. Our improved rate comes from a tighter bound on the time $\tau$ that it takes for GD to transition from unstable (non-monotonic loss) to stable (monotonic loss), via a fine-grained analysis of the oscillatory dynamics of GD in the subspace orthogonal to the max-margin classifier. We also provide a lower bound of $\tau$ matching our upper bound up to logarithmic factors, showing that our analysis is tight.

23.
PLOS Computational Biology 2026-06-01

BeetleAtlas 2: An enhanced <i>Tribolium castaneum</i> web resource for tissue and developmental transcriptomics allowing refinement of gene predictions

by David P. Leader, Muhammad T. Naseem, Janina L. Rinke, Kenneth Veland Halberg BeetleAtlas is an online resource for tissue- and stage-specific transcriptomics in the red flour beetle, Tribolium castaneum. On updating from the original Tcas5.2 genome assembly to the more recent improved icTriCast1.1 genome assembly it became evident that there were major discrepancies between the gene models of the two genome annotations in use: the OGS3 and the NCBI gene sets. As neither was clearly superior we implemented a new design in BeetleAtlas 2 (beetleatlas.org) comprising two parallel ‘modes’ — one incorporating results using the NCBI gene models and a second incorporating those using the OGS3 gene models. This allows direct comparison where equivalent gene models exist: 50–57% of cases. To aid resolution of discrepancies between the two gene model sets and verification of results, gene models are linked to a custom visualization of RNA-seq read coverage of the genome in the UCSC Genome Browser. This displays reads from 22 tissues and life stages superimposed on the icTriCast1.1 genome assembly. Reference tracks show the NCBI gene models, the OGS3 gene models after translation of their coordinates from the Tcas5.2 assembly, and 1050 discontinued NCBI gene models from the previous assembly after a similar transfer of coordinates. We document various situations in which distinct patterns of expression of the tissues can be used to confirm and extend correlations between the two gene sets, resolve discrepancies between them, make corrections and identify putative genes or exons absent from the current gene sets. BeetleAtlas 2 allows those involved in Tribolium research to avoid the pitfalls inherent in incorrect gene models when planning experiments on specific genes and interpreting the results. It also demonstrates how BeetleAtlas 2 might play an important role in establishing a revised gene set for Tribolium castaneum in the future.

24.
arXiv (CS.AI) 2026-06-16

Open-SWE-Traces: Advancing Dual-Mode Multilingual Distillation for Software Engineering Agents

arXiv:2606.16038v1 Announce Type: cross Abstract: The path toward autonomous software engineering is currently bottlenecked by a severe deficit of diverse, large-scale trajectory data. We address this by introducing \ourdataset, an expansive dataset of 207,489 agentic trajectories spanning nine programming languages (Python, Go, TS, JS, Rust, Java, PHP, C, C++). Sourced from 20,000 real-world PRs via OpenHands and SWE-agent harnesses, the dataset utilizes a hybrid-reasoning synthesis: Minimax-M2.5 generates trajectories with explicit "thinking" processes, while Qwen3.5-122B provides high-quality "non-thinking" traces. Filtered for permissive licenses (MIT, Apache, BSD) from SWE-rebench-V2, this data facilitates the training of models capable of long-horizon reasoning. We validate the dataset by fine-tuning the Qwen3-30B-A3B series (Thinking, Instruct, and Coder). The best performing model achieves resolve rates of 61.7% on SWE-bench Verified, 57.1% on SWE-bench Multilingual, and 36.8% on SWE-bench Pro. These results establish Open-SWE-Traces as a premier resource for distilling human-level software engineering capabilities into efficient, open-source agentic LLMs.

25.
arXiv (CS.AI) 2026-06-16

Entropy-Gated Latent Recursion

arXiv:2606.16620v1 Announce Type: cross Abstract: Inference-time scaling has become the dominant lever for improving language-model reasoning, but existing methods derive rollout diversity from a single source: stochastic token-level sampling. We argue that this single-axis sampling space is fundamentally limiting, and identify a second, fully deterministic and complementary axis: the layer span $L$ at which a frozen model's top decoder layers are recursively re-applied at high-uncertainty tokens. Different choices of $L$ produce distinct rollouts that solve different subsets of problems, with no stochasticity. We instantiate this axis through Entropy-Gated Latent Recursion (EGLR), a training-free decoding procedure that re-applies the top-$L$ layers for at most $K_{\max}$ iterations until the next-token distribution converges. Combined with $T$ temperature samples, EGLR turns a single-axis stochastic rollout pool into an $L\times T$ Cartesian sampling space at almost the same per-rollout cost. We characterize this space across $8$ instruction-tuned models and $6$ math reasoning benchmarks, and show that the $L$-axis is genuinely complementary to temperature: on MATH-500 with Qwen2.5-3B-Instruct, the joint $L\times T$ oracle reaches $91.6\%$, $+8.2$ percentage points beyond the temperature-only oracle ($83.4\%$) and $+10.4$ points beyond the layer-only oracle ($81.2\%$), confirming that the two axes capture genuinely complementary problems. The expanded rollout pool provides richer per-prompt candidates for any downstream procedure that consumes rollouts, including self-consistency, best-of-$N$ with verifiers, and group-relative RL training (GRPO), opening a new direction for inference-time scaling that does not rely on stochastic noise.