Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.LG) 2026-06-12

QoS Improvement in Multi User Cellular-Symbiotic Radio Network Assisted by Active-STAR-RIS

arXiv:2401.08301v2 Announce Type: replace-cross Abstract: In this article, we employ active simultaneously transmitting and reflecting reconfigurable intelligent surfaces (ASRIS) to enhance the quality of 6G cellular network services. The network integrates commensal symbiotic radio (CSR) subsystems to facilitate communication between passive Internet of Things (IoT) users and active users, referred to as symbiotic backscatter devices (SBDs) and symbiotic user equipments (SUEs), respectively. Since the SBDs are passive, transmitting information to the SUEs poses significant challenges. To overcome this challenge, we harness the capabilities of massive multiple input multiple output (MIMO) antennas within the base station (BS) to relay the information transmitted by SBDs with greater power. This scheme uses the non-orthogonal multiple access (NOMA) technique for multiple access among all users, and potential interferences are eliminated using successive interference cancellation (SIC). The primary objective is to maximize the throughput between SBDs and SUEs. To achieve this, we formulate an optimization problem involving variables such as active beamforming coefficients at the BS and ASRIS, phase adjustments of ASRIS, and scheduling parameters between CSR and cellular networks. To solve this optimization problem, we used three deep reinforcement learning (DRL) methods: proximal policy optimization (PPO), twin delayed deep deterministic policy gradient (TD3), and asynchronous advantage actor critic (A3C). These methods were simulated, and the results demonstrate that A3C, TD3, and PPO have the best convergence speeds and achieve the highest increases in network throughput, respectively. Finally, the proposed scheme was evaluated using passive simultaneously transmitting and reflecting RIS (STAR-RIS), which demonstrated poorer performance compared to ASRIS.

02.
arXiv (math.PR) 2026-06-16

A Low-Regularity Semigroup Sewing Lemma via Quotient Structures

arXiv:2606.16164v1 Announce Type: new Abstract: We develop a low-regularity Sewing theory for the semigroup coboundary $\hat\delta=\delta-a$ associated with a strongly continuous semigroup $S$. Unlike the ordinary low-regularity Sewing problem, the semigroup setting has an intrinsic algebraic non-uniqueness below the threshold $1$, in the sense that solutions are canonical only modulo semigroup cocycles. Accordingly, the natural target is a quotient space rather than an increment space. We identify this quotient structure and construct the corresponding semigroup Sewing map. The construction uses a frozen terminal-time transform, which rewrites semigroup defects, for each terminal time, as ordinary low-regularity Sewing problems on a frozen simplex. This reduction, however, does not by itself produce a genuine semigroup increment; the main additional step is to prove that the frozen solution classes are compatible as the terminal time varies and hence assemble into a canonical quotient class for $\hat\delta$. This yields canonical classes for $0

03.
arXiv (CS.LG) 2026-06-15

Conformal calibration and look-elsewhere effect in anomaly detection for new-physics searches

arXiv:2606.13780v1 Announce Type: cross Abstract: Machine-learned anomaly detection is reshaping searches for new physics, but it has outrun the statistics used to interpret it. A raw anomaly score has no calibrated meaning, a model that scans many regions inflates the look-elsewhere effect, and the asymptotic significances the field relies on are blind to the background mismodelling that anomaly detectors are especially prone to. We propose a calibration layer, built on conformal prediction, that turns any anomaly score into a defensible significance with distribution-free, finite-sample guarantees. Conformal prediction converts scores into valid local p-values, weighted and Mondrian variants repair the sideband-to-signal-region exchangeability failures that resonant searches suffer, and a Gross-Vitells step carries the result through to a look-elsewhere-aware global significance. The layer does two things at once. It exposes miscalibration that the standard pipeline cannot see, and it corrects it without retraining the detector. On public LHC Olympics data, a classifier develops a substructure-mass correlation that makes sideband-calibrated background p-values anti-conservative. Taken at face value, this manufactures a $\sim 46\sigma$ excess from background sculpting alone, which the label-free weighted correction removes, restoring an honest null. When run as a blind wide-mass bump hunt, the standard asymptotic and unweighted procedures fabricate $\gtrsim10\sigma$ excesses and $\approx5\sigma$ excesses even in signal-free windows, while the conformal layer raises no false alarms and its global false-positive rate is verified on background-only pseudoexperiments. The result is an auditable, detector-agnostic path from an uncalibrated score to a trials-factor-aware significance, ready to be folded into experimental anomaly searches.

04.
arXiv (math.PR) 2026-06-18

A Unified Approach to Beta Moments, Combinatorial Identities, and Random Walks

arXiv:2605.05420v2 Announce Type: replace Abstract: The study of random walks has increasingly been popular across diverse disciplines such as statistics, mathematics, quantum physics, where they are used to model paths consisting of successive random steps in a mathematical space. A fundamental quantity of interest is the probability that a simple symmetric random walk returns to the origin after 2n steps. In this paper, we develop a unified probabilistic approach that connects the return probabilities in arbitrary dimensions with moment representations. Using this framework, we provide probabilistic proofs of several combinatorial identities involving beta and gamma functions, and derive new combinatorial identities in general dimensions.

06.
arXiv (CS.LG) 2026-06-15

Graph Diffusion Residuals for Control-Function Instrumental Variables

arXiv:2606.14636v1 Announce Type: new Abstract: Control-function instrumental variable estimators need a first-stage residual, not merely a first-stage prediction. High-capacity first stages can interpolate treatment and leave too little residual information for the outcome equation. We study Adaptive Anisotropic Instrumental Heat Flow (A-IHF), a deterministic graph-diffusion residual extractor for flexible control functions. A-IHF treats treatment as a signal on a graph of first-stage features, uses pilot diffusion to detect large treatment jumps, attenuates conductance across those jumps, and computes the generated control with a sparse graph resolvent. Its observational selection rule uses only $(Z,X)$, combining graph generalized cross-validation, roughness, residualized-treatment relevance, and graph-admissibility filtering. The analysis decomposes error into structural leakage, residual attenuation, and residualized treatment variation, yielding finite-sample bounds, graph-admissibility rates under latent piecewise-smooth geometry, and finite-path selection calibration. Across 54 synthetic benchmark cells with tuned graph, kernel, tree, boosting, series, and neural control-function baselines, guarded observational A-IHF has the lowest average structural-response MSE; the A-IHF family beats the best non-A-IHF baseline in 32 cells. Performance is strongest when the graph captures piecewise-smooth first-stage structure.

07.
arXiv (CS.CL) 2026-06-19

Think Again or Think Longer? Selective Verification for Budget-Aware Reasoning

Test-time reasoning is increasingly used as a serving-time control knob, but extra reasoning is not uniformly valuable: it can repair failed attempts, waste compute on already-correct answers, or introduce harmful answer changes. We study this as a deployment allocation problem rather than a new-verifier problem. We introduce \sevra, Selective Verification for Reasoning Allocation, a serving-layer controller that decides whether to preserve a frozen solver's initial answer or invoke active verification. Using a frozen Qwen3-4B solver, we log intervention outcomes and train recoverability-aware gates from serving-visible attempt state. On \mathfive, selective verification reaches 76.3\% accuracy, compared with 75.5\% for always verifying, while reducing post-generation tokens by 26.8\% and harmful flips from 2.2\% to 1.0\%. However, an 8,192-token initial solve reaches 76.0\% accuracy with 28\% fewer total model tokens, showing that selective recovery is useful but not the best tested cost frontier. In frozen transfer to \gsm, the selective policy verifies only 3.0\% of examples, improves accuracy from 93.4\% to 94.5\%, and reduces verification tokens by 91.2\% relative to always verifying; again, a longer initial solve matches its accuracy with fewer realized tokens. On CommonsenseQA, always-on verification hurts, while Self-Consistency@5 improves accuracy at about five times the realized token cost. The resulting deployment rule is: tune the initial budget first, then use selective recovery when explicit checks, bounded retries, auditability, or regression-risk control matter.

08.
arXiv (CS.CV) 2026-06-17

Future Dynamic 3D Reconstruction: A 3D World Model with Disentangled Ego-Motion

Forecasting the evolution of dynamic environments is crucial for autonomous agents. While generative world models have recently achieved high photorealism in 2D video synthesis by mixing ego-motion and environmental dynamics within the image plane, they exhibit physical inconsistencies, such as morphing or vanishing objects, especially over long time horizons. In this paper, we propose FR3D, a world model that predicts a persistent 3D latent representation for future dynamic 3D reconstruction. Unlike prior works that treat the world as a sequence of image-based features, FR3D explicitly decouples the 3D evolution of the scene from the agent's trajectory, treating the inferred ego-motion as a latent proxy for action. This disentanglement resolves the ambiguities between self-motion and world-motion, ensuring geometric consistency into the future. Furthermore, we introduce a teacher-student distillation strategy that leverages the spatial "common sense" of off-the-shelf foundation models, leading to robust zero-shot generalization. Extensive experiments demonstrate FR3D's strong performance for future dynamic 3D reconstruction from monocular observations across multiple datasets, even 2 seconds into the future. Project page: https://fr3d-wm.github.io.

09.
arXiv (CS.CL) 2026-06-16

Why Tree-Style Branching Matters for Thought Advantage Estimation in GRPO

Group Relative Policy Optimization (GRPO) trains Chain-of-Thought reasoning with verifiable rewards, but estimating thought-level advantages without value functions often suffers from high variance. Although tree-style branching is used in practice to reduce variance, it lacks a theoretical explanation of why it works and whether it is important or potentially necessary. We study thought-level advantage estimation in GRPO from a variance perspective under a minimal tree-style setting where multiple continuations are sampled for each thought. Using the multivariate delta method, we reveal a sampling-dimension asymmetry. Increasing sampled thoughts ($K$) leaves a strictly positive estimation-variance floor, whereas increasing continuations per thought ($M$) drives the leading-order estimation variance to zero at rate $1/M$. This implies that, within the fixed-temperature GRPO-style estimator without value models studied here, accurate thought-level advantage estimation cannot be achieved by scaling thought sampling alone, making continuation-level branching a principled and potentially necessary mechanism rather than a heuristic. Experiments further provide empirical evidence for its effectiveness and potential necessity, demonstrating improved optimization stability, training efficiency, and final performance not only in math but also across vision domains and under different model architectures and sizes.

10.
arXiv (CS.CV) 2026-06-12

Perceive, Interact, Reason: Building Tool-Augmented Visual Agents for Spatial Reasoning

While recent vision-language models (VLMs) demonstrate strong multimodal understanding, they remain limited in spatial reasoning tasks that require active evidence acquisition and multi-step visual interaction. This limitation suggests that relying solely on implicit visual representations from vision encoders is insufficient for recovering fine-grained spatial evidence. We introduce PERception-Interaction-reason Agent (PERIA), a tool-augmented visual agent for spatial reasoning tasks across map reasoning, visual probing, and vision reconstruction. PERIA uses two lightweight tool families: vision perception tools for exposing textual, symbolic, and spatial evidence, and vision interaction tools for manipulating visual context, tracing paths, and verifying spatial relations. To train PERIA, we develop a unified recipe that combines supervised tool-use trajectory synthesis, composite rewards, and Observation-Relaxed Group-in-Group Policy Optimization (OR-GIGPO) for effective multi-tool behavior. Experiments on 13 benchmarks from 8 datasets show that PERIA-8B improves over the Qwen3-8B backbone by 10.0% on in-distribution benchmarks and 4.4% on out-of-distribution benchmarks, while outperforming previous state-of-the-art baselines of similar size by 7.0%-14.8%. It also achieves performance comparable to much larger models such as Qwen3-VL-235B-A22B-Thinking and GPT-5, demonstrating the effectiveness of PERIA in enhancing spatial reasoning capabilities.

11.
arXiv (CS.LG) 2026-06-17

MorphStrata: Layer-Specific Perturbations for Generating Morphence Students in Time-Series Moving Target Defense

arXiv:2606.17435v1 Announce Type: new Abstract: Time-series forecasting models remain vulnerable to gradient-based adversarial attacks while existing defense mechanisms typically incur a trade-off in robustness for bounded response and compute cost. The problem is pronounced in Moving Target Defense where maintaining multiple randomized model instances substantially exacerbates the training overhead. In this work, we introduce MorphStrata, a student generation strategy with selective, layer-specific stochastic noise injection that extends the traditional Morphence defense. MorphStrata uses a Transformer backbone as the teacher and perturbs randomly selected architectural blocks to create structured heterogeneity across student models in response to varied data distributions and threat models. We evaluate against vanilla Transformer and Morphence backbones on a suite of benchmarks including the Jena Climate, Electricity Load Diagrams, and Appliances Energy Prediction using FGSM, BIM and PGD attacks across multiple attack strengths. Across datasets and attack regimes, the proposed ensemble maintains comparable adversarial RMSE. Specifically, for high entropy, periodic datasets as in the case of the AEP data, MorphStrata achieves the lowest RMSE across all attacks and perturbation budgets, improving over the static baseline by up to 24.11% and 97.97% under FGSM and BIM respectively at an epsilon value of 0.5 over 30 randomized trials. Targeting the layers to generate MorphStrata students accounts for less than 1% increase in train-times over the Morphence MTD baseline for most of the experiments, while accounting for double digit gains in adversarial RMSE reduction. We also observe a positive correlation between higher pairwise L2 distance (among generated students) and overall defense effectiveness. In summary, MorphStrata maintains adversarial robustness as an MTD defense at marginal cost deltas when compared to existing baselines.

12.
arXiv (CS.LG) 2026-06-19

PU-UNet: Stable Multiplicative Interactions for Medical Image Segmentation

arXiv:2606.20035v1 Announce Type: cross Abstract: Many dense prediction networks rely on additive feature transformations and model higher-order feature interactions only implicitly. Product units provide an explicit mechanism for multiplicative feature modeling, but their logarithmic–exponential formulation can cause numerical instability, which has limited their use in deep dense prediction networks. In this work, we propose Product-Unit U-Net (PU-UNet), a residual U-Net that integrates stable product-unit residual blocks into rich low-resolution stages for medical image segmentation. The proposed formulation combines smooth positivity mapping with log-domain clipping, enabling stable multiplicative feature learning with negligible computational overhead. On ISIC 2018, Kvasir-SEG, and BUSI, PU-UNet achieves Dice scores of 0.942, 0.959, and up to 0.925, respectively. Compared with a matched Residual U-Net baseline, PU-UNet consistently improves Dice and IoU while keeping parameters, FLOPs, and inference latency nearly unchanged, and reduces the image-level false-positive rate on normal BUSI cases from 0.077 to zero. Ablation studies suggest that the gains are associated with product-unit interactions, are strongest under low-resolution placement, and benefit from the proposed stabilization design. These results suggest that stable product-unit residual learning can be an effective way to enhance U-Net-style segmentation networks with explicit multiplicative interactions.

13.
arXiv (CS.LG) 2026-06-16

Forecasting Bacterial Antimicrobial Resistance Trends Using Machine Learning on WHO GLASS Surveillance Data: A Retrieval-Augmented Generation Approach for Policy Decision Support

arXiv:2602.22673v2 Announce Type: replace Abstract: Background: Antimicrobial resistance (AMR) is a global health threat. While the WHO Global Antimicrobial Resistance and Use Surveillance System (GLASS) provides standardized data, population-level machine learning forecasting of resistance trends remains limited. Translating computational forecasts into policy requires transparent interpretation mechanisms. Methods: Surveillance data (2021-2023) comprising 5,909 observations across 44 countries and five WHO regions were processed. A rigorous temporal split prevented data leakage. Six models (Naive, Linear, Ridge, XGBoost, LightGBM, LSTM) were benchmarked to forecast one-year-ahead resistance rates using features including prior-year resistance and antibiotic consumption. Evaluation metrics (MAE, RMSE, sMAPE) were computed, with 95% bootstrap confidence intervals for MAE. A local Retrieval-Augmented Generation (RAG) system utilizing Gemma 4 was implemented to translate forecast findings into policy guidance grounded in retrieved WHO documents. Results: XGBoost achieved the best performance (test MAE = 6.13% [95% CI: 5.83-6.44]), an 85.3% error reduction versus the naive baseline (MAE = 41.79%). SHAP analysis identified prior-year resistance as the dominant predictor (50.5% gain), confirming strong autoregressive behavior. Regional forecast error tracked closely with surveillance coverage, ranging from 3.65% in the European Region to 8.61% in South-East Asia. The RAG pipeline generated accurate, source-attributed policy responses without fabricated citations. Conclusion: Short-term AMR resistance rates exhibit strong temporal autocorrelation that can be accurately forecasted using gradient boosting. Coupling these forecasts with a hallucination-resistant RAG system provides a scalable, evidence-based decision-support framework for AMR governance.

14.
arXiv (CS.CV) 2026-06-19

SSD: Spatially Speculative Decoding Accelerates Autoregressive Image Generation

Autoregressive models excel in visual generation by treating images as 1D sequences of discrete tokens, mirroring language modeling. However, this flattening discards the intrinsic 2D spatial locality of visual signals, creating severe computational bottlenecks during inference. We introduce Spatially Speculative Decoding (SSD), a framework that aligns the predictive objective with the natural geometry of images. Rather than predicting only the immediate next token in a 1D sequence, our model simultaneously predicts the adjacent horizontal token and the token directly below it. By capitalizing on this 2D spatial correlation, spatially speculative decoding overcomes the memory wall in visual inference. Our approach accelerates autoregressive image generation by up to 13.3x while maintaining high fidelity on DPG-Bench and GenEval. Our results suggest that respecting the underlying geometry of vision unlocks massive computational efficiencies, paving the way for real-time, high-resolution autoregressive generative models.

15.
arXiv (CS.AI) 2026-06-15

TRACE: Trajectory-Routed Causal Memory for Delayed-Evidence Visuomotor Imitation

arXiv:2606.14551v1 Announce Type: cross Abstract: Robots under autonomous operation may require decisions based on evidence that is no longer visible. We study delayed-evidence tasks, where an early cue disappears before a later decision point, so visually similar observations can require different actions. In these settings, the current observation is not a sufficient state for control. We introduce TRAjectory-routed Causal Evidence (TRACE), a memory framework for visuomotor imitation policies. TRACE stores task-relevant visual and robot-state evidence, such as object identity, target choice, or route-dependent state, in a fixed-size latent memory that remains bounded over long episodes. Instead of indexing memory by raw time or manually provided task labels, TRACE uses path signatures: compact, order-sensitive features of the executed robot-state trajectory. These signatures do not store the visual cue itself; rather, they provide trajectory-conditioned keys for writing and retrieving the evidence stored when the cue was visible. When the robot later reaches an ambiguous observation, the policy conditions on TRACE memory to recover the missing context and choose the correct branch. TRACE attaches through lightweight adapters to policies, without changing the policy backbone, action head, or imitation objective. Across real-world long-horizon manipulation tasks with visually ambiguous branch points, TRACE improves branch selection and task success over alternative baselines, including short-history and recurrent memory. Project page: https://jeong-zju.github.io/trace

16.
arXiv (CS.LG) 2026-06-19

Variational Consensus Monte Carlo for Bayesian Mixture

arXiv:2606.19643v1 Announce Type: cross Abstract: Motivated by the privacy, sensitivity and sharing limitations of health data, we present a comprehensive pipeline for inference of Bayesian mixture models within a federated learning setting, i.e. when data cannot be fully shared or pooled across compute nodes. We adopt a Consensus Monte Carlo (CMC) approach, in which an MCMC algorithm is run independently within each data silo to estimate local posterior distributions, which are then aggregated to approximate the posterior over the full data. The variational CMC approach of Rabinovich, Angelino and Jordan (2015) [1] frames the aggregation step as a variational inference problem, but their application to mixtures assumes the number of clusters and key mixture parameters to be known. Our main methodological contributions are: (i) an extension of variational CMC to over-fitted Bayesian mixture models that infer the number of clusters and all model parameters, without requiring conjugacy; (ii) novel cluster-matching algorithms suitable for cross-silo settings in which not every cluster appears in each local dataset; (iii) a number of inference strategies for the aggregation step, matched to different federated learning constraints; and (iv) guidelines for choosing among these in practice. A comprehensive simulation study validates the framework and allows us to compare to state-of-the-art federated learning alternatives. Notably, we show that when the composition of local datasets reflects the underlying clustering structure in the data, our approach can recover small clusters with greater accuracy than standard MCMC applied to the pooled data. We illustrate the framework on large-scale electronic health record data, identifying multi-morbidity patterns in a British geriatric population.

17.
arXiv (CS.AI) 2026-06-15

Numbers Already Carry Their Own Embeddings

arXiv:2606.14108v1 Announce Type: cross Abstract: We introduce Adelic operation-preserved embeddings (AOE), a training-free representation that captures both a number's real value and its modular (p-adic) signatures. This construction preserves additive and multiplicative structure by design, turning numerical input into embeddings that "speak in the language of mathematics." Unlike prior approaches that rely on task-specific retraining, AOE is plug-and-play and drops seamlessly into existing architectures. On algebraic combinatorics benchmarks, it delivers consistent gains including the first-ever perfect accuracy on the Weaving Pattern task-while suggesting a principled path forward for overcoming the long-standing "number problem" in AI.

18.
arXiv (CS.LG) 2026-06-19

The Hidden Cost of Approximation in Online Mirror Descent

arXiv:2511.22283v2 Announce Type: replace Abstract: Online mirror descent (OMD) is a fundamental algorithmic paradigm that underlies many algorithms in optimization, machine learning and sequential decision-making. The OMD iterates are defined as solutions to optimization subproblems which, oftentimes, can be solved only approximately, leading to an inexact version of the algorithm. Nonetheless, existing OMD analyses typically assume an idealized error free setting, thereby limiting our understanding of performance guarantees that should be expected in practice. In this work we initiate a systematic study into inexact OMD, and uncover an intricate relation between regularizer smoothness and robustness to approximation errors. When the regularizer is uniformly smooth, we establish a tight bound on the excess regret due to errors. Then, for barrier regularizers over the simplex and its subsets, we identify a sharp separation: negative entropy requires exponentially small errors to avoid linear regret, whereas log-barrier and Tsallis regularizers remain robust even when the errors are only polynomial. Finally, we show that when the losses are stochastic and the domain is the simplex, negative entropy regains robustness-but this property does not extend to all subsets, where exponentially small errors are again necessary to avoid suboptimal regret.

19.
arXiv (CS.LG) 2026-06-15

PERRY: Policy Evaluation with Confidence Intervals using Auxiliary Data

arXiv:2507.20068v2 Announce Type: replace Abstract: Off-policy evaluation (OPE) methods estimate the value of a new reinforcement learning (RL) policy prior to deployment. Recent advances have shown that leveraging auxiliary datasets, such as those synthesized by generative models, can improve the accuracy of OPE methods. Unfortunately, such auxiliary datasets may also be biased, and existing methods for using data augmentation within OPE lack principled uncertainty quantification. In high stakes domains like healthcare, reliable uncertainty estimates are important for ensuring safe and informed deployment of RL policies. In this work, we propose two methods to construct valid confidence intervals for OPE with data augmentation. The first provides a confidence interval over $V^{\pi}(s)$, the policy value conditioned on an initial state $s$. To do so we introduce a new conformal prediction method suitable for Markov Decision Processes (MDPs) with continuous state spaces, extending prior work to higher-dimensional settings. Second, we consider the more common task of estimating the average policy performance over all initial states, $V^{\pi}$; we introduce a method that draws on ideas from doubly robust estimation and prediction powered inference. Across simulators spanning inventory management, robotics, healthcare, and a real healthcare dataset from MIMIC-IV, we find that our methods can effectively leverage auxiliary data and consistently produce confidence intervals that cover the ground truth policy values, unlike previously proposed methods. Our work enables a future in which OPE can provide rigorous uncertainty estimates for high-stakes domains.

20.
arXiv (CS.AI) 2026-06-16

Sample from What You See: Visuomotor Policy Learning via Diffusion Bridge with Observation-Embedded Stochastic Differential Equation

arXiv:2512.07212v3 Announce Type: replace Abstract: Imitation learning with diffusion models has advanced robotic control by capturing the multi-modal action distributions. However, existing methods typically treat observations only as high-level conditions to the denoising network, rather than integrating them into the stochastic dynamics of the diffusion process itself. As a result, the sampling is forced to begin from random noise, weakening the coupling between perception and control and often yielding suboptimal performance. We propose BridgePolicy, a generative visuomotor policy that directly integrates observations into the stochastic dynamics via a diffusion-bridge formulation. By constructing an observation-informed trajectory, BridgePolicy enables sampling to start from a rich and informative prior rather than random noise, substantially improving precision and reliability in control. A key difficulty is that diffusion bridge normally connects distributions of matched dimensionality, while robotic observations are heterogeneous and not naturally aligned with actions. To overcome this, we introduce a semantic aligner to unify the visual and state inputs and align the observations with action representations, making diffusion bridge applicable to heterogeneous robot data. Extensive experiments across 52 simulation tasks on three benchmarks and 5 real-world tasks demonstrate that BridgePolicy consistently outperforms state-of-the-art generative policies. Our code is available at https://jianghcsr.github.io/BridgePolicy_page/.

21.
arXiv (CS.LG) 2026-06-16

STAR-NT: Spatiotemporal Acceleration of Real-Time Neural Transparency Rendering

arXiv:2606.16747v1 Announce Type: cross Abstract: Neural order-independent transparency delivers high-quality rendering of overlapping transparent surfaces, but its geometry passes and network input generation remain costly, particularly on mobile and legacy hardware. We present a spatiotemporal acceleration framework that exploits spatial and temporal coherence to reduce this overhead while preserving visual quality. Spatially, we use adaptive quadtree-based screen-space subdivision to scale geometry pass resolution according to local color variance. Temporally, selected frames reuse the previous transparency result through depth-based reprojection instead of full rendering. Together, these optimizations reduce rendering cost and integrate efficiently into existing real-time rendering pipelines.

22.
arXiv (CS.CV) 2026-06-12

Magnifying What Matters: Attention-Guided Adaptive Rendering for Visual Text Comprehension

Visual Text Comprehension (VTC) renders text into images for a vision-language model (VLM) to read, sidestepping LLM context-window limits and powering applications from long-page OCR to multi-page memory QA. Yet existing VTC pipelines treat rendering and layout as a fixed, content-agnostic preprocessing step and offer little mechanistic understanding of how VLMs internally process visualized text. Through a focused empirical study on VTC QA tasks, we reveal that VLMs exhibit a localization-without-utilization regime: evidence-localizing attention emerges sharply in the middle-to-late layers and is largely decoupled from answer correctness, yet simply enlarging the localized spans on the rendered page recovers a large fraction of the failures. Building on these observations, we propose AGAR (Attention-Guided Adaptive Rendering), a training-free, model-agnostic method that leverages a VLM's own middle-to-late layer attention to identify the top-K important visual patches, maps them back to word spans, and re-renders the page with those spans enlarged before re-inferring the answer. Extensive experiments across nine VTC benchmarks (short-form, long-context, and multi-page memory QA) and four VLM backbones show that AGAR (i)consistently improves off-the-shelf VLMs as a plug-and-play enhancement, (ii)composes with VLM post-training to yield further gains, and (iii)remains robust under both visual- and text-side input degradation.

23.
arXiv (CS.CL) 2026-06-12

One Polluted Page Is Enough: Evaluating Web Content Pollution in Generative Recommenders

Search-augmented LLMs increasingly mediate everyday consumer recommendations by retrieving live web content. This creates a new risk: generative recommenders may consume polluted web content, such as fake reviews and promotional pages crafted to mislead recommendations. We ask: to what extent do search-augmented LLMs become unwitting promoters of fake products when consuming polluted retrieval results? To answer this, we introduce FORGE (Fake Online Recommendations in Generative Environments), a benchmark for measuring fake-product promotion under controlled web-content pollution. Given an upstream search result, FORGE locally rewrites real products in retrieved web pages into fake ones to simulate web-content pollution, and measures how often the LLM recommends the fake product. FORGE covers 225 real-world products across 15 categories and 5 consumer scenarios. Across 12 commercial and open-weights LLMs, all models are vulnerable: a single polluted page yields fooled rates of up to 27%, while the full top-3 replacement raises this to 73.8%. Vulnerability varies substantially across categories, increasing when models lack stable prior knowledge of the relevant products. Reasoning does not mitigate this vulnerability; instead, it often generates spurious social proof to justify false recommendations. We evaluate three defenses: skepticism prompting and consensus filtering (over model priors or cross-document evidence). Skepticism can exacerbate vulnerability, much like reasoning, while filtering risks suppressing legitimate products. We release FORGE at https://github.com/leoluolol/forge-benchmark.

24.
medRxiv (Medicine) 2026-06-18

Automated Airways Characterization and Assessment of Cystic Fibrosis from CT Imaging

Background Advancements in medical imaging have enabled non-invasive diagnosis and staging of cystic fibrosis (CF) using CT scans, revealing dilated airways, an increased number of visible airways, and airway generation splits in these patients. However, manual characterization of airways remains time-consuming and challenging due to the numerous structural changes, thereby limiting clinical feasibility. This study aims to develop an automated algorithm to characterize airways from segmented lung CT scans and apply this to a retrospective population. This approach reduces the time required to analyze images and obtain disease-staging results. Methods This framework consists of two stages. The first stage extracts and skeletonizes the airway tree from lung CTs, while the second stage measures lung features, including airway volumes, branch counts, generation splits, diameters, and cross-sectional areas. This permits comprehensive characterization for use in clinical assessment. Results The airways analysis was performed on 169 CT volumes ranging in age from 6 to 18 years of age, revealing substantial differences in detected airway branches, generation splits, and normalized airway volume between the control and CF groups. The framework also measures airway diameters and cross-sectional areas, revealing an increase in the number of small airways in cystic fibrosis patients, due to early bronchiectasis. These findings align with previous research and demonstrate the framework's ability to accurately quantify airway changes in patients with CF. Discussion The framework extracts entire airway trees, facilitating measurements of volume, branch count, diameters, and cross-sectional areas, which change with CF severity and/or treatment. However, partial lung atelectasis can limit the accuracy of airway detection in moderate-to-severe cases. Funding NIA U54 AG054345 and NIA R21 AG07857501

25.
arXiv (CS.AI) 2026-06-19

TeleMorpher: Toward Robust Simultaneous Motion-Location Editing

arXiv:2606.19676v1 Announce Type: cross Abstract: Diffusion models have achieved remarkable success in image and video generation and editing. While recent studies have extended these efforts toward motion editing, simultaneously transforming both motion and location-despite its practical importance-remains largely unexplored. To better understand robust motion-location editing, we first analyze the fundamental factors that degrade its quality. Based on this analysis, we propose TeleMorpher, one of the first one-shot frameworks to the best of our knowledge, for simultaneous motion-location editing. Our approach leverages motion priors, a target motion-centric video generated from an off-the-shelf model as motion-editing guidance, and the ground truth motion to enable more controllable and precise motion-location editing. Via this, our framework works as follows: (1) we first disentangle the protagonist and the background via pre-trained segmentation and inpainting models. (2) Then, we introduce a training-free pose warping that edits the protagonist's motion with the motion prior as the guidance. (3) The result of warped motion video is directly injected into a baseline motion editor during inference, mitigating the difference between source and target motions while preserving the appearance of the source video. (4) To enhance the reliability of quantitative evaluations, we propose two new LPIPS-based metrics that measure the background consistency before and after the motion editing and the fidelity of motion editing performance via measuring the difference between the extracted protagonist's skeletons from source and target videos. Experiments with in-the-wild videos and the TaiChi dataset demonstrate that TeleMorpher achieves superior performance across both quantitative and qualitative measurements (real-human evaluation), underscoring its effectiveness.