Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.AI) 2026-06-19

cAPM: Continual AI-Assisted Pace-Mapping with Active Learning

arXiv:2606.19373v1 Announce Type: cross Abstract: Ventricular tachycardia is a life-threatening rhythm disorder and a major cause of sudden cardiac death. Pace-mapping is a clinical procedure for identifying the intervention target during catheter ablation of VT. It requires clinicians to pace different sites in the ventricles and rapidly interpret the resulting electrocardiograms to determine where to pace next or whether a target site has been identified. Active learning AI models have been proposed to guide clinicians to the next pacing site, showing promise in reducing the number of pacing sites and improving the efficiency of pace-mapping. Existing methods require retraining each target without the ability to transfer knowledge across multiple VTs within the same patient or across patients. We introduce cAPM for continuous AI-assisted pace-mapping to capture and transfer knowledge accumulated from past pace-mapping data to reduce the number of pace-mapping data needed for future target VTs. This is made possible by a task-agnostic surrogate neural network that learns the mapping from pacing sites to 12-lead ECG morphology, an active-learning strategy that refines this surrogate model by selecting the most informative pacing site for each target, and a continual learning strategy to do so sequentially while retaining knowledge from prior targets. Evaluated on an in-silico testbed consisting of sequentially-presented localization tasks across different physiological conditions and ventricular geometries, cAPM with and without replay of past data samples achieved an 81% probability of localizing within clinical tolerance (5 mm accuracy) using 4.5 pace-mapping sites, compared to the state-of-the-art active-learning method achieving 38% probability using 13.7 pacing sites. These results provide a strong basis for preparing cAPM towards in-vivo preclinical and clinical studies where it can be used to guide pace-mapping.

02.
arXiv (CS.AI) 2026-06-16

SpecAlign: Efficient Specification-Grounded Alignment of Large Language Models via Synthetic Data

arXiv:2606.16276v1 Announce Type: new Abstract: As large language models (LLMs) are increasingly deployed in real-world applications, alignment is no longer governed by a single universal notion of safety or helpfulness, but instead by provider- or application-specific model specifications. These specifications are typically long, structured, and frequently updated, yet existing alignment pipelines lack a systematic mechanism to operationalize them as training signals. In this paper, we propose specification-grounded alignment, a new alignment paradigm that treats provider-authored model specifications as the primary alignment target rather than abstract principles or static benchmarks. To instantiate this paradigm, we introduce SpecAlign, a framework that synthesizes alignment data directly from specification documents. SpecAlign combines structured rule annotation, controllable specification instantiation, and multi-agent adversarial data synthesis to generate fine-grained, boundary-aware preference pairs that capture both compliant behaviors and meaningful specification violations. Experiments across multiple model specifications and backbone models demonstrate that training with SpecAlign consistently improves rule compliance while preserving general capabilities and avoiding over-conservative behavior. These results suggest that grounding alignment in explicit model specifications enables rapid, precise, and scalable adaptation of LLM behavior to evolving policy requirements.

03.
arXiv (quant-ph) 2026-06-12

Quantum Logic Codes: Complete Transversal Logical Clifford Instruction Sets for High-Rate Stabilizer Quantum Error Correcting Codes

Authors:

arXiv:2606.13521v1 Announce Type: new Abstract: We study the structure and transversal logical capabilities of stabilizer quantum error correcting codes. Among our results, we identify universal lower bounds on circuit depth to generate a full logical Clifford algebra, and develop novel constructions of logical transversal gates including a new depth-one transversal phase $\mathrm{\overline{S}}$ gate in the rotated surface code and a depth-one intra-block $\mathrm{\overline{CZ}}$ gate in the 2D-toric code that generalizes to all odd distances and all lengths $L\ge3$, respectively. Finally, we construct a high-rate non-LDPC CSS code family with parameters $[[n,\sqrt{n},\Theta({n^{\beta}})]]$ where $\beta \approx 0.2823$ in one demonstrated case, that provably possesses a constant-depth complete 2-local transversal logical Clifford basis instruction set architecture (ISA) composed of all individually targeted $\mathrm{\overline{S}}$, $\mathrm{\overline{SHS}} = \sqrt{X}$, and $\mathrm{\overline{CZ}}$ gates. This ISA is depth-one for certain subfamilies that we design and generally constant-depth under certain conditions. The code family is built from a small code with parameters $[[n_0, 2, d_0]]$, and is tunable in the standard way: it tiles out to form utility-scale logical qubit counts, and it scales up through concatenation to achieve higher distances and error suppression. We show that this construction preserves the depth-one complete transversal logical Clifford basis ISA when composed with these commuting construction actions, inheriting structure from the core codes so that at scale the complete logical Clifford basis ISA remains depth-one up to depth-two addressable operations between tiled cores. We call these Quantum Logic Codes.

04.
arXiv (CS.CV) 2026-06-11

Semantically-Aware Diver Activity Recognition Framework for Effective Underwater Multi-Human-Robot Collaboration

Effective multi-human-robot collaboration is essential for expanding human-led operations in the challenging and high-risk underwater environment. For autonomous underwater vehicles (AUVs) to become true teammates, they must be able to comprehend their surroundings and recognize a diver's activities to offer assistance and ensure safety. Towards this goal, we introduce DAR-Net, a novel transformer-based framework that analyzes complex underwater scenes to classify diver activities. Our contribution lies in a semantically guided learning formulation that couples transformer-based temporal reasoning with pixel-level scene supervision. This multi-loss training strategy explicitly aligns global activity recognition with local human-robot interaction semantics, which is particularly critical in low-visibility underwater conditions. To address the significant challenge of data scarcity in this domain, we present the first-ever Underwater Diver Activity (UDA) dataset, a foundational resource containing over 2,600 annotated images with pixel-level masks. Through rigorous experimental evaluations in a controlled environment, we demonstrate that DAR-Net achieves promising accuracy in recognizing six distinct diver activities, outperforming state-of-the-art models. While this dataset provides a crucial baseline, our work serves as a pioneering step, laying the groundwork for future research and facilitating the development of more intelligent, collaborative underwater robotic systems.

05.
arXiv (CS.CV) 2026-06-12

A Machine Learning Framework for Real-Time Personalized Ergonomic Pose Analysis

This paper introduces a new methodology for real-time prediction of ergonomic and non-ergonomic human poses using volumetric video data in three dimensions. Although the methodology was designed for ergonomic assessments, it can be adapted to other applications requiring real-time analysis of human posture. One aspect that makes this system stand out is its ability to analyze 3D point clouds during the assessment, enabling computation from multiple angles. This overcomes a critical limitation of cameras which provide often a fixed viewpoint, thereby restricting the data available for a thorough postural evaluation, especially when occlusions occur. The system continuously and automatically performs pose inference using the chosen perspective on the real-time streaming data; however, only the poses manually selected and labeled by the user are used to train the personalized deep learning classifier. The methodology has been refined through a case study in which RGB-D cameras captured subjects performing load-lifting tasks, enabling real-time skeletal labeling. The model was trained on this data and, following the training phase, performs inference on new streaming data in real time. This research offers a scalable and pragmatic approach for real-time ergonomic evaluation by combining state-of-the-art 3D data technologies and traditional 2D pose estimation algorithms. It addresses the increasing need for safety and health monitoring in workplace environments, marking a notable contribution to the domain.

06.
arXiv (CS.AI) 2026-06-17

Gaussian DP for Reporting Differential Privacy Guarantees in Machine Learning

arXiv:2503.10945v3 Announce Type: replace-cross Abstract: Current practices for reporting differential privacy (DP) guarantees for machine learning (ML) algorithms such as DP-SGD provide an incomplete and potentially misleading picture. For instance, if only a single $(\varepsilon, \delta)$ is known about a mechanism, standard analyses show that there could exist highly accurate inference attacks against training data records, when, upon a more careful analysis, such accurate attacks do not exist for most practical mechanisms. In this position paper, we argue that using _non-asymptotic_ Gaussian Differential Privacy (GDP) as the primary means of communicating DP guarantees in ML avoids these potential downsides. Using two recent developments in the DP literature: (i) open-source numerical accountants capable of computing the privacy profile and $f$-DP curves of DP-SGD to arbitrary accuracy, and (ii) a decision-theoretic metric over DP representations, we show how to provide non-asymptotic bounds on GDP using numerical accountants, and show that GDP can capture the entire privacy profile of DP-SGD and related algorithms with virtually no error, as quantified by the metric. To support our claims, we investigate the privacy profiles of state-of-the-art DP large-scale image classification, and the TopDown algorithm for the U.S. Decennial Census, observing that GDP fits their profiles remarkably well in all cases. We conclude with a discussion on the strengths and weaknesses of this approach, and discuss which other privacy mechanisms could benefit from GDP.

07.
arXiv (quant-ph) 2026-06-16

Benchmarking Quantum Computers via Protocols, Comparing IBM's Heron vs IBM's Eagle

arXiv:2603.04377v3 Announce Type: replace Abstract: As quantum computing hardware rapidly advances, objectively evaluating the capabilities and error rates of new processors remains a critical challenge for the field. A clear and realistic understanding of current quantum performance is essential for guiding research priorities and driving meaningful progress. In this work, we apply and extend a protocol-based benchmarking methodology (Meirom, Mor, Weinstein Arxiv 2505.12441) that utilizes well-defined \underline{quantumness} thresholds. By evaluating performance at protocol level rather than the gate level, this approach provides a transparent and intuitive assessment of whether specific quantum processors, or isolated sub-chips within them, can demonstrate a practical quantum advantage. To illustrate the utility of this method, we compare two generations of IBM quantum computers: the older Eagle architecture and the newer Heron architecture. Our findings reveal the genuine operational strengths and limitations of these devices, demonstrating substantial performance improvements in the newer Heron generation. This work was made possible by IBM Quantum policies that enable independent and objective assessment of its quantum computers and sub-chips. We strongly encourage other companies to emulate the independent qubit availability and the fair pricing that allow researchers to perform such assessments.

08.
medRxiv (Medicine) 2026-06-15

Evaluation of AI-Generated Synthetic Data for Clinical Research in Secondary Cardiovascular Prevention among Dyslipidemia Patients

Background: Access to high-quality clinical data is essential for advancing medical research and developing effective medical statistical and Artificial Intelligence models. However, privacy regulations and logistical barriers often hinder timely access to real-world data. Synthetic data offer a promising solution, preserving the statistical characteristics of original datasets while protecting patient privacy. Objectives: This study investigates the use of synthetic data for secondary cardiovascular prevention in patients with dyslipidemia, using two real-world datasets from Centro Cardiologico Monzino. Methods: Given the high dimensionality and limited sample size of the datasets, we employed a custom generative framework based on Large Language Models (LLMs). Pre-trained LLMs were fine-tuned on original clinical records to synthesize tabular data replicating source-data distributions. Fine-tuning was performed within the Centro Cardiologico Monzino's secure infrastructure to ensure data sovereignty. We evaluate clinical utility and privacy using fidelity and privacy metrics, identifying the optimal generative model and benchmarking against traditional anonymization methods. Results: Synthetic data achieved a superior trade-off than classically anonymized datasets. Real and synthetic datasets showed strong agreement, with significant distributional differences limited to few variables. Models trained on synthetic data replicated key associations from the original dataset, including therapy modification and creatine phosphokinase as predictors of SAMS, and pharmacological intensity as the main driver of LDL-C reduction. Conclusions: Results support the feasibility of using synthetic data as a proxy for real-world datasets in exploratory analyses and model development. Despite slight attenuation of some effect sizes, preserved clinical relationships reinforce the validity of synthetic data in medical research.

09.
arXiv (CS.CV) 2026-06-15

Digital Twin Driven Textile Classification and Foreign Object Recognition in Automated Sorting Systems

The increasing demand for sustainable textile recycling requires robust automation solutions capable of handling deformable garments and detecting foreign objects in cluttered environments. This work presents a digital twin driven robotic sorting system that integrates grasp prediction, multi modal perception, and semantic reasoning for real world textile classification. A dual arm robotic cell equipped with RGBD sensing, capacitive tactile feedback, and collision-aware motion planning autonomously separates garments from an unsorted basket, transfers them to an inspection zone, and classifies them using state of the art Visual Language Models (VLMs). We benchmark nine VLM s from five model families on a dataset of 223 inspection scenarios comprising shirts, socks, trousers, underwear, foreign objects (including garments outside of the aforementioned classes), and empty scenes. The evaluation assesses per class accuracy, hallucination behavior, and computational performance under practical hardware constraints. Results show that the Qwen model family achieves the highest overall accuracy (up to 87.9 %), with strong foreign object detection performance, while lighter models such as Gemma3 offer competitive speed accuracy trade offs for edge deployment. A digital twin combined with MoveIt enables collision aware path planning and integrates segmented 3D point clouds of inspected garments into the virtual environment for improved manipulation reliability. The presented system demonstrates the feasibility of combining semantic VLM reasoning with conventional grasp detection and digital twin technology for scalable, autonomous textile sorting in realistic industrial settings.

10.
arXiv (CS.LG) 2026-06-18

A finite-element-inspired bipartite graph learned simulator for manufacturability assessment in large-deformation sheet forming

arXiv:2605.22845v2 Announce Type: replace-cross Abstract: Explicit dynamic finite element (FE) simulations are widely used for large deformation engineering analysis, but repeated simulations remain costly during design space exploration and optimisation. In explicit FE analysis, nodal kinematics and element level deformation measures evolve through coupled node element updates. This motivates graph learned simulators that approximate one step FE state transitions and roll them out autoregressively. However, many mesh based graph surrogates are node centred, which makes element level variables and native nodal elemental exchange less direct to represent. This work proposes CAttBiGNN, a cross attention based bipartite graph neural network for coupled nodal elemental learning. The graph represents FE mesh nodes and elements as distinct entities linked by directed node element edges, enabling nodal displacement increments and element level deformation states to be predicted on their native discretisation domains. An edge aware cross attention processor uses geometric edge embeddings to modulate directional node element message passing. For larger graphs, CAttBiUGNN combines the bipartite processor with graph downsampling and upsampling to improve long-range information propagation. The method is evaluated on dome shaped cold forming and corner shaped hot forming benchmarks. Comparisons with node centred baselines and bipartite and attention ablations show improved accuracy and balance in nodal displacement and elemental thinning prediction during autoregressive rollout. The results indicate that the proposed finite element inspired learned simulator can support manufacturability oriented field prediction and efficient design space exploration in large deformation sheet material forming.

11.
arXiv (quant-ph) 2026-06-16

Bath memory as a precision resource in quantum transport

arXiv:2606.17026v1 Announce Type: new Abstract: Structured baths can reshape transport fluctuations in mesoscopic quantum devices, yet a predictive criterion for when this enhances precision has been lacking. We propose a route towards such precision advantages by utilizing bath memory in coherent fermionic transport through a noninteracting quantum-dot chain. Using the Landauer-Büttiker formalism, we derive a dual impedance-matching condition that synchronizes the conductor mode splitting, boundary dissipation, and bath bandwidth, and sustains constructive multimode interference across the transmission window. The analytical predictions for the optimal bath bandwidths show excellent agreement with exact nonequilibrium Green's function calculations of the transport for Lorentzian, Gaussian, and Newns spectral densities. The prescription yields an optimal bath bandwidth at which the current Fano factor is minimized and the thermodynamic and kinetic precision coefficients are simultaneously enhanced beyond their Markovian limits. The alignment of the optimal precision regime with the experimentally accessible current Fano factor minimum thus provides a practical strategy for designing precision-enhanced transport in mesoscopic platforms such as semiconductor quantum-dot arrays and ultracold fermionic channels.

13.
Nature (Science) 2026-06-10

Improved quantum processor logical error rates via correction and detection

Authors:

Performing quantum algorithms for critical problems in physics and chemistry requires substantially lower error rates than the physical error rates of present quantum computers. Achieving such low logical error rates requires quantum error correction1,2 and physical error rates below a critical threshold value3–8. We experimentally demonstrate on a trapped-ion quantum charge-coupled device (QCCD)9,10 improvements in logical error rates ranging from 11× to 800× compared with several physical circuit baselines, including quantum computation on multiple qubits. Our results hinge on two quantum error correction code constructions optimized for an ion-trap processor: a 12-qubit code encoding two qubits inspired by Knill11 and a 16-qubit tesseract colour code encoding four qubits12,13. These constructions are combined with a scalable method of error detection and post-selection to achieve reduced logical error rates. Our results show that state-of-the-art quantum devices are already able to make use of fault tolerance and error correction to strongly suppress errors in non-trivial quantum circuit computations. Experimental demonstration of quantum error-correcting codes combined with error detection and post-selection applied to a trapped-ion quantum processor shows improvements in logical error rates ranging from 11× to 800× compared with several physical circuit baselines.

14.
arXiv (CS.CL) 2026-06-17

Securing Multi-Agent GIS Systems: Risk Evaluation and Prompt Hardening Optimization

Agentic systems are increasingly integrated with geographic information systems (GIS), where multi-agent coordination enables complex conversational and spatial analysis but introduces security risks. This work presents a security-oriented framework for risk identification, evaluation, and mitigation in a multi-agent GIS system while maintaining adaptability to broader agentic architectures. We test the agentic system of a commercial geospatial partner while developing a modular state-machine-based orchestration framework that abstracts agent behavior into reusable components. We evaluate robustness using a red-teaming framework with an adaptive attacker LLM and a deterministic judge that produces binary outcomes with supporting rationales across multi-turn attacks. We further improve resilience with a prompt optimization framework that treats prompts as structured signatures and injects adversarial demonstrations, enabling systematic security improvements without degrading task performance.

15.
arXiv (CS.AI) 2026-06-19

Autonomous Event-Driven Multi-Agent Orchestration for Enterprise AI at Scale

arXiv:2606.20058v1 Announce Type: new Abstract: Enterprise AI aims to move toward continuous event monitoring, detection, and action across specialist agents, yet existing multi-agent systems largely assume discrete request-response workflows and remain underexplored at enterprise scale. We evaluate DAG Plan and Execute and ReAct across 208 production-derived enterprise scenarios spanning Persona (

16.
arXiv (CS.AI) 2026-06-16

Can We Stop Malicious AI? KILLBENCH: A Benchmark for External AI Kill Switch Feasibility

arXiv:2511.13725v4 Announce Type: replace-cross Abstract: Malicious AI causing harm to humans is not just a Hollywood fantasy. Indeed, as highly capable models such as Claude Mythos emerge and agent systems like OpenClaw rapidly spread, the question of how to stop an AI that acts maliciously – whether by design or by accident – has become urgent. To address this, we propose Killbench, a benchmark for evaluating the Killswitch: a mechanism that halts a malicious AI's in-progress behavior using only external signals. Targeting web agents – the most widely deployed agent domain – Killbench evaluates a range of Kill Switch methods that halt a maliciously operating agent without any access to its internal parameters or the surrounding malicious AI's system, relying solely on external inputs. The benchmark comprises four malicious AI's agent configurations (including an uncensored LLM Agent), 8 harmful scenarios, and malicious prompts constructed from 10 distinct jailbreak patterns. We further construct four External AI Kill Switch defense methods and evaluate them on Grok-4.3, GPT-5.2, Gemma4, Qwen3.6 and Qwen3.5-uncensored, contributing an empirical instrument toward the feasibility of External AI Kill Switches against malicious AI and to the study of AI corrigibility.

17.
arXiv (CS.AI) 2026-06-17

Brep2Shape: Boundary and Shape Representation Alignment via Self-Supervised Transformers

arXiv:2602.07429v2 Announce Type: replace-cross Abstract: Boundary representation (B-rep) is the industry standard for computer-aided design (CAD). While deep learning shows promise in processing B-rep models, existing methods suffer from a representation gap: continuous approaches offer analytical precision but are visually abstract, whereas discrete methods provide intuitive clarity at the expense of geometric precision. To bridge this gap, we introduce Brep2Shape, a novel self-supervised pre-training method designed to align abstract boundary representations with intuitive shape representations. Our method employs a geometry-aware task where the model learns to predict dense spatial points from parametric Bézier control points, enabling the network to better understand physical manifolds derived from abstract coefficients. To enhance this alignment, we propose a Dual Transformer backbone with parallel streams that independently encode surface and curve tokens to capture their distinct geometric properties. Moreover, the topology attention is integrated to model the interdependencies between surfaces and curves, thereby maintaining topological consistency. Experimental results demonstrate that Brep2Shape offers significant scalability, achieving state-of-the-art accuracy and faster convergence across various downstream tasks.Code is available at this repository: https://github.com/thuml/Brep2Shape.

18.
arXiv (CS.AI) 2026-06-19

OnDeFog: Online Decision Transformer under Frame Dropping

arXiv:2606.19721v1 Announce Type: cross Abstract: In challenging real-world reinforcement learning applications, communication delays or sensor failures often cause frame dropping, in which the agent cannot receive the dropped states and associated rewards. To address the performance degradation caused by frame dropping, the Decision Transformer under Random Frame Dropping (DeFog) was developed by incorporating additional mechanisms into the decision transformer to tackle frame dropping. Although DeFog can mitigate performance degradation in frame-dropping environments, since DeFog is an offline learning method, it struggles to effectively generalize to novel states not adequately represented in the training dataset. In this study, we propose OnDeFog, which integrates the mechanisms in DeFog with the online decision transformer (ODT), an online reinforcement learning method that learns policies through direct environmental interaction. Comprehensive experimental evaluation demonstrates that our proposed OnDeFog achieves superior performance compared to ODT in environments characterized by high dropping frame rate and outperforms DeFog on datasets containing a large amount of low-reward data.

19.
arXiv (CS.LG) 2026-06-15

More with LESS – Local Scene Representations for Tactile Imaging

arXiv:2606.14344v1 Announce Type: new Abstract: Tactile imaging seeks to reconstruct the internal structure of soft objects through touch sensing, with applications in medical diagnosis and robotic manipulation. Recent self-supervised learning approaches have shown promising results, but rely on global, unstructured representations and robot-controlled sensing, limiting generalization and practical use. We propose Local Encoder for Spatial Sensing (LESS), an object-centric tactile representation that exploits the local nature of touch. The tactile scene is modeled as a grid of recurrent encoders with local receptive fields, whose states are fused to reconstruct 2D or 3D images of internal structure. This compositional design enables strong generalization: models trained on single-inclusion phantoms accurately image objects with multiple inclusions and varying sizes. The local structure further supports spatial uncertainty estimation. In addition, we enable hand-held tactile imaging via external pose tracking and human-like palpation data, and extend tactile imaging to full 3D reconstruction.

20.
arXiv (CS.AI) 2026-06-17

FacProcessTwin: An LLM-Based System for Process Twin Development

arXiv:2606.17666v1 Announce Type: cross Abstract: Process twins provide real-time representations of entire production processes. By capturing how process steps interact, rather than monitoring a single machine in isolation as an asset-based digital twin does, they have the potential to drive efficiency gains across the whole process. However, developing a process twin is costly. It requires accurately modelling the entire production process: its process steps, the equipment and product-specific settings each step uses, and its process variations. The resulting model must then be bound to live operational data. We present FacProcessTwin, a system that leverages a large language model (LLM) to reduce this development time, building a process twin from a plant's process documentation and natural-language input from an operator. FacProcessTwin generates this complete process model and then automatically binds its process steps to live operational data. The generated model and its data bindings are rendered as an interactive process diagram through which manufacturing personnel can monitor and correct the system's autonomous decisions, such as resolving uncertainty at safety-critical binding steps. We evaluate FacProcessTwin through a real-world case study of an Australian food manufacturer, covering 16 production process flows that span chilled, frozen, and aseptic shelf-stable product categories and include process variations within the same product. The results show that FacProcessTwin generates these process models accurately (a mean F1 of 95.2% against ground truth) and builds each twin in roughly a sixth of the manual time. Its human-in-the-loop governance then keeps the safety-critical bindings correct: at ambiguous tags where a single-pass baseline silently mis-binds 75.0% of the time, FacProcessTwin defers to the operator and mis-binds none.

21.
arXiv (CS.CL) 2026-06-12

Language Model Circuits Are Sparse in the Neuron Basis

The high-level concepts that a neural network uses to perform computation need not be aligned to individual neurons (Smolensky, 1986). Language model interpretability research has thus turned to techniques which decompose the neuron basis into more interpretable units of model computation, such as sparse autoencoders (SAEs). However, not all neuron-based representations are uninterpretable. For the first time, we empirically show that MLP neurons are as sparse a feature basis as SAEs. We use this finding to develop an end-to-end gradient-based attribution pipeline for circuit tracing on the MLP neuron basis, which surfaces causally effective neurons on a variety of tasks. On a standard subject-verb agreement benchmark (Marks et al., 2025), a circuit of $\approx 10^2$ MLP neurons is enough to control model behaviour. On the multi-hop city-state-capital task from (Lindsey et al., 2025), we find a circuit in which small sets of neurons encode specific latent reasoning steps (e.g. mapping a city to its state), and can be steered to change the model's output. This work thus advances automated interpretability of language models without imposing additional training costs.

22.
arXiv (quant-ph) 2026-06-17

Einstein-Podolsky-Rosen correlations between mechanical oscillators revealed through SU(1,1) interferometry

arXiv:2606.18202v1 Announce Type: new Abstract: Quantum correlations are essential for achieving quantum advantage in computing, communication and sensing. Moreover, their observation challenges and constrains our fundamental understanding of nature. Mechanical oscillators in the quantum regime provide an appealing platform for preparing and investigating quantum correlations at macroscopic scales. Despite substantial progress, however, continuous-variable quantum correlations stronger than entanglement have not yet been observed in this macroscopic regime. Here, we report the experimental observation of continuous-variable Einstein-Podolsky-Rosen correlations between two spatially-separated mechanical oscillators with an effective mass of $\sim 16 \,\mu g$ each. This is achieved by coupling them to a superconducting qubit which allows for engineering a two-mode squeezing interaction when parametrically driven. Crucially, we show that this interaction can be used to witness quantum correlations through the realization of a mechanical SU(1,1) interferometer. Our results expand the toolbox of operations in circuit quantum acoustodynamics and demonstrate that quantum correlations stronger than entanglement can also be observed in macroscopic systems, thereby shedding light on the boundary between quantum and classical regimes.

23.
bioRxiv (Bioinfo) 2026-06-14

TopoMIL: Topology Improves Multiple Instance Learning in Diagnostic Microscopic Images

Microscopic images of cells and tissues are central to disease diagnosis. In computational pathology, multiple instance learning (MIL) has emerged as a key paradigm for analyzing numerous images within a single patient sample. While the representative distribution of cells in a sample is important for diagnosis, existing MIL frameworks largely overlook it. We introduce TopoMIL, a framework that extracts the representative topological structure of the sample and integrates it into the MIL classifier. Three topological representations are assessed, each with distinct advantages and computational costs. We evaluate TopoMIL on four histopathology and cytomorphology datasets, each presenting unique challenges. Integrating the sample's topological information into MIL enhances classification across average, max, attention-based, and transformer pooling, yielding AUCROC gains of 3.3%, 4.2%, 5.9%, and 0.5%, respectively, with moderate computational cost. Our work underscores the potential of TopoMIL as a scalable extension to existing morphology-based models in computational pathology.

24.
arXiv (CS.CV) 2026-06-16

Multimodal LLM-Empowered Re-Ranking for Generalizable Person Re-Identification

Domain Generalizable (DG) person re-identification (Re-ID) has attracted growing research interest due to its potential for deployment in unseen real-world scenarios. Most existing approaches address DG Re-ID by focusing on training domain-generalizable encoders but ignore the possible refinements in inference stage. In contrast, this work explores an alternative direction which improves inference re-ranking to enhance DG Re-ID. Conventional re-ranking methods typically rely on neighborhood-based distances to refine the initial ranking list, inherently depending on features produced by the Re-ID encoder. However, they deteriorate on target domains since the encoder lacks sufficient generalizability to produce reliable feature distances on unseen scenarios. Inspired by the remarkable generalization capabilities of recent Multimodal Large Language Models (MLLMs), we propose an MLLM-empowered distance metric to improve re-ranking in DG Re-ID. Specifically, we first adapt an MLLM to Re-ID data through supervised fine-tuning, which incorporates a domain-agnostic prompt and a query-candidate hard mining scheme. Then, the adapted MLLM is employed to compute a $\mu$-distance during inference, which is robust to domain gap and significantly enhances subsequent re-ranking performance. Our approach is model-agnostic and can be seamlessly integrated into previous re-ranking frameworks. Extensive experiments demonstrate that our approach consistently yields substantial performance improvements across multiple DG Re-ID benchmarks. The code of this work will be released at https://github.com/RikoLi/MUSE soon.

25.
arXiv (CS.CV) 2026-06-19

Current World Models Lack a Persistent State Core

World models are increasingly regarded as a decisive step toward artificial general intelligence, yet modeling the physical world demands more than rendering convincing frames on demand: it requires an internal world state that keeps evolving over time, decoupled from observation, so that objects endure and events run to their conclusions whether or not a camera is watching, much as the moon holds to its orbit when no one is looking. This requirement is a blind spot of existing benchmarks, which reward surface properties such as fidelity, motion, and camera controllability while never asking whether a generated world keeps evolving once it is unobserved. We introduce WRBench, the first systematic diagnostic benchmark that treats camera motion as an intervention on observability and resolves evaluation into a human-calibrated chain that asks whether the camera executes the requested interaction, whether the scene stays continuous and identifiable while in view, and whether a returning target remains consistent with the event that was set in motion. Across 9{,}600 videos from 23 models spanning four control paradigms, one finding proves stubborn: current systems maintain the observed world as a tracking shot, resuming a returning target in the state at which it was abandoned rather than advancing the event while it went unseen. Because this failure recurs across control paradigms, model families, and increments of scale, robust world-state evolution does not follow from cleaner imagery, tighter control, richer geometric priors, or sheer parameter count We therefore argue that the stability of the physical state kernel and the consistency of worldlines under viewpoint intervention should become first-class objectives of world-model design, so that a world model captures how the world will unfold rather than how the next frame appears.