中 EN
Sign In Register

Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

Sign In Register
01.
arXiv (quant-ph) 2026-06-11

Collective Emission in LH2 Assembly Beyond the Point-Dipole Approximation

Authors:
Javed Akhtar↗Himangshu Prabal Goswami↗

arXiv:2606.11227v1 Announce Type: cross Abstract: Collective emission in light-harvesting assemblies is governed by the local transition dipole and finite geometry of emitting units, a fact that point-dipole approximation obscures. To go beyond this picture, we develop a non-Hermitian Hamiltonian using the quantum electrodynamic dyadic Green's tensor for a purple bacteria. We construct it for the isolated 24-bacteriochlorophyll conical frustum and its P42$_1$2 crystallographic assembly. The P42$_1$2 unit-cell symmetry is found to invert the bright-dark ordering of the single ring, placing subradiant states at the low-energy end and revealing the entire crystal to be the energy-harvesting entity. Tilt-driven switching is activated only in crystal geometries where the finite dipole-carrier (LH2) lies perpendicular to the growth plane. Vacancy and orientational disorder work only in cooperation to renormalize the switching threshold from higher polar angles to lower values.

Read & Discuss → View Source →
02.
arXiv (quant-ph) 2026-06-12

Quantum Logic Codes: Complete Transversal Logical Clifford Instruction Sets for High-Rate Stabilizer Quantum Error Correcting Codes

Authors:
Adam Holmes↗

arXiv:2606.13521v1 Announce Type: new Abstract: We study the structure and transversal logical capabilities of stabilizer quantum error correcting codes. Among our results, we identify universal lower bounds on circuit depth to generate a full logical Clifford algebra, and develop novel constructions of logical transversal gates including a new depth-one transversal phase $\mathrm{\overline{S}}$ gate in the rotated surface code and a depth-one intra-block $\mathrm{\overline{CZ}}$ gate in the 2D-toric code that generalizes to all odd distances and all lengths $L\ge3$, respectively. Finally, we construct a high-rate non-LDPC CSS code family with parameters $[[n,\sqrt{n},\Theta({n^{\beta}})]]$ where $\beta \approx 0.2823$ in one demonstrated case, that provably possesses a constant-depth complete 2-local transversal logical Clifford basis instruction set architecture (ISA) composed of all individually targeted $\mathrm{\overline{S}}$, $\mathrm{\overline{SHS}} = \sqrt{X}$, and $\mathrm{\overline{CZ}}$ gates. This ISA is depth-one for certain subfamilies that we design and generally constant-depth under certain conditions. The code family is built from a small code with parameters $[[n_0, 2, d_0]]$, and is tunable in the standard way: it tiles out to form utility-scale logical qubit counts, and it scales up through concatenation to achieve higher distances and error suppression. We show that this construction preserves the depth-one complete transversal logical Clifford basis ISA when composed with these commuting construction actions, inheriting structure from the core codes so that at scale the complete logical Clifford basis ISA remains depth-one up to depth-two addressable operations between tiled cores. We call these Quantum Logic Codes.

Read & Discuss → View Source →
03.
arXiv (CS.AI) 2026-06-11

Libra: Efficient Resource Management for Agentic RL Post-Training

Authors:
Kaiwen Chen↗Xin Tan↗Jingzong Li↗Hong Xu↗

arXiv:2606.03077v2 Announce Type: replace-cross Abstract: Reinforcement learning (RL) has emerged as a standard post-training paradigm for shaping large language models (LLMs) into capable agents. In agentic RL, the rollout stage generates trajectories while invoking tools, producing long-tailed and non-stationary workloads that expose two fundamental challenges in resource management. First, due to the long-tail distribution, a small fraction of trajectories dominates rollout makespan. Second, rollout and training are subject to cross-stage imbalance, as they exhibit strong asymmetry in compute patterns, memory demands, and sensitivity to sequence length. Compounding this asymmetry, the sequence length distribution drifts continuously as the policy evolves, rendering any static resource split progressively suboptimal. We present Libra, a resource management system to address both challenges via two core mechanisms. The first is a global resource planner that jointly optimizes GPU allocation across rollout and training clusters. It leverages an elastic hybrid pool to enable lightweight, non-blocking worker reallocation between stages. The second is a causality-driven multi-level feedback queue (C-MLFQ) scheduler, which routes requests to heterogeneous rollout buckets based on causal signals derived from tool-return outcomes, rather than relying on fragile length predictions. Evaluated on 48 A800 GPUs, Libra achieves up to 3.0x higher throughput and converges up to 2.5x faster in reward compared to the baselines.

Read & Discuss → View Source →
05.
PLOS Medicine 2026-05-27

Sequential chemo-immunotherapy followed by standard versus reduced thoracic radiotherapy for older and/or frail stage III non-small-cell lung cancer: A randomized open-label cohort trial

Authors:
Wei-Xiang Qi↗

by Wei-Xiang Qi, Shuyan Li, Mengdi Wang, Huan Li, Feifei Xu, Lei Yao, Biao Yu, Linlin Chen, Gang Cai, Cheng Xu, Xianwen Sun, Zhiyao Bao, Jiayi Chen, Yi Xiang, Shengguang Zhao Background The appropriateness of concurrent chemoradiotherapy (cCRT) for older or clinically vulnerable stage III unresectable non-small-cell lung cancer (NSCLC) patients remains contentious. Furthermore, the survival implications of de-escalating thoracic radiotherapy (RT) intensity in this population have not been conclusively elucidated. Methods and findings We conducted a phase II randomized, open-label, two-cohort (non-comparative) trial at a tertiary hospital in China (NCT05557552). Between September 30, 2022 and April 30, 2024, we enrolled 56 older and/or frail patients with stage III NSCLC who were ineligible for cCRT. The primary endpoint was the 1-year progression-free survival (PFS) rate estimated using the Kaplan–Meier method. Secondary endpoints included objective response rate (ORR), overall survival (OS), and safety. In the intention-to-treat (ITT) set, which included all 56 randomized patients who received at least one dose of study treatment, the 1-year PFS was 84.3% (95% confidence interval [CI] [70.3%, 98.3%]) in the standard RT group and 70.7% (95% CI [54.3%, 87.1%]) in the reduced RT group. In the per-protocol set (53 patients), the 1-year PFS was 82.9% (95% CI [68.9%, 98.8%]) in the standard RT group and 73.4% (95% CI [58.3%, 92.4%]), with a median follow-up of 24 months. Among 56 patients in the safety analysis set, 71.4% of patients experienced grade 3/4 adverse events (AEs) in the standard RT group and 53.6% in the reduced RT group. One patient (3.6%) in the reduced RT and three patients (10.7%) in the standardized RT experienced grade 5 AEs. The main limitations are the non-comparative design, small sample size, and lack of power to establish non-inferiority or superiority. Conclusion The current study suggested that reduced RT combined with sequential chemo-immunotherapy might be feasible for older/frail patients intolerant to cCRT, showing numerically similar survival outcomes. These exploratory findings warrant confirmation in larger, adequately powered randomized trials. Trial registration The trial had been registered on ClinicalTrials.gov on Sep 30, 2022.ClinicalTrials.gov NCT05557552

Read & Discuss → View Source →
06.
arXiv (CS.AI) 2026-06-16

Scaling Adaptive Depth with Norm-Agnostic Residual Networks

Authors:
Tom\'as Figliolia↗Beren Millidge↗

arXiv:2606.16112v1 Announce Type: cross Abstract: Residual architectures are ubiquitous in deep learning, but they suffer from a subtle structural limitation: the norm of the residual stream can grow rapidly with depth. As a result, updates from later layers become small relative to the accumulated residual state. This reduces their impact on the representation and limits the benefits of scaling models in depth. To address this, we introduce NAG, a norm-agnostic residual architecture that separates magnitude from directional information in the residual stream, preserving meaningful layer contributions throughout depth and preventing later updates from being systematically suppressed by residual-norm growth. Importantly, NAG introduces only a negligible number of additional parameters and relies on simple operations that are easily kernel-fusible, preserving training efficiency in practice. We show that this architecture outperforms baseline Transformers, with gains that increase substantially as depth grows, enabling effective training of much deeper models. The norm-agnostic formulation also leads to an interpretable Mixture-of-Depths (MoD) mechanism that adaptively skips both attention and MLP layers. Beyond serving as a post-training accuracy-compute tradeoff, this mechanism can be used as a pretraining-time scaling strategy: under iso-FLOP training, compute saved by reducing per-token forward-pass cost can be reinvested into training on more tokens while keeping the total parameter count and KV-cache budget fixed. In our experiments, moderate Mixture-of-Depths rates of approximately 20%-25% match full-depth baseline performance under equal training compute while substantially reducing the number of executed layer parameters and forward-pass FLOPs. These results identify sparsity in depth as a new scaling axis for fixed-compute training, enabling very deep yet FLOP-efficient models.

Read & Discuss → View Source →
07.
arXiv (CS.CV) 2026-06-12

SAM-Deep-EIoU: Selective Mask Propagation for Multi-Object Tracking

Authors:
Alexander Holmberg↗

Multi-object tracking has a heavy-tailed difficulty distribution: most frames are easy for a lightweight base tracker, while a small fraction are intrinsically hard. Video object segmentation (VOS) models can often preserve identity through the hard frames where the base tracker fails, but they are much more expensive in compute and memory. We propose selective mask propagation, a tracking algorithm that dispatches from a base tracker to a VOS model only on windows where an assignment-uncertainty signal fires. The base tracker's output is modified only when the VOS model makes a confident prediction that contradicts the base tracker's identity assignment; weak or inconclusive predictions preserve the base output. The method is training-free, treats both the base tracker and the VOS model as black boxes, and can benefit from replacing the VOS component with a more capable model. On DanceTrack, selective mask propagation improves three different base trackers. On SportsMOT, where identity preservation is central to sports analytics, SAM3-Deep-EIoU with global track association achieves state-of-the-art performance on the benchmark with 86.8 HOTA.

Read & Discuss → View Source →
08.
arXiv (CS.CV) 2026-06-18

S3OD: Towards Generalizable Salient Object Detection with Synthetic Data

Authors:
Orest Kupyn↗Hirokatsu Kataoka↗Christian Rupprecht↗

Salient object detection exemplifies data-bounded tasks where expensive pixel-precise annotations force separate model training for related subtasks like DIS and HR-SOD. We present a method that dramatically improves generalization through large-scale synthetic data generation and ambiguity-aware architecture. We introduce S3OD, a dataset of over 139,000 high-resolution images created through our multi-modal diffusion pipeline that extracts labels from diffusion and DINO-v3 features. The iterative generation framework prioritizes challenging categories based on model performance. We propose a streamlined multi-mask decoder that handles the inherent ambiguity in salient object detection by predicting multiple valid interpretations. Models trained only on synthetic data achieve 20-50% error reduction in cross-dataset generalization, while fine-tuned versions reach state-of-the-art performance across DIS and HR-SOD benchmarks.

Read & Discuss → View Source →
09.
arXiv (quant-ph) 2026-06-12

Approximability limits for bounded-degree max-LINSAT and implications for decoded quantum interferometry

Authors:
Maximilian J. Kramer↗Carsten Schubert↗Jens Eisert↗

arXiv:2606.13570v1 Announce Type: new Abstract: For general max-k-XORSAT with $k \geq 3$, no polynomial-time algorithm can do substantially better than random guessing on worst-case instances unless $\mathsf{P} = \mathsf{NP}$: approximating beyond the random-assignment value of $1/2$ is $\mathsf{NP}$-hard. The picture changes when each variable appears in at most $D$ constraints. In that bounded-degree setting, polynomial-time algorithms can provably beat the random baseline by an additive amount of order $1/\sqrt{D}$. For Boolean instances, this scaling is known to be optimal: the matching hardness result is due to Trevisan, while the corresponding algorithmic guarantee was established by Barak et al. Whether the same holds over general finite fields, and what it implies for quantum algorithms, has not been established. We make this connection explicit and extend the hardness to max-E$k$-LINSAT$(q,r)$ with bounded degree $D$ and over arbitrary finite fields $\mathbb{F}_q$, proving that it is $\mathsf{NP}$-hard to exceed $r/q + \mathcal{O}_{q,r}(1/\sqrt{D})$. These results provide the complexity-theoretic benchmark for the bounded-degree instances targeted by decoded quantum interferometry (DQI), QAOA, and classical heuristics. Any quantum advantage on bounded-degree instances is therefore confined to the constant prefactor. We further show that in the context of DQI and on $(k,D)$-regular instances, this prefactor is sensitive to the nature of the decoder: DQI with classical decoders faces an information-theoretic $1/\sqrt{D \log D}$ barrier that prevents it from matching the hardness scaling, while DQI with quantum decoders is compatible with the $1/\sqrt{D}$ scaling – identifying quantum decoding as the key ingredient for matching the complexity-theoretic scaling with DQI.

Read & Discuss → View Source →
10.
arXiv (CS.CV) 2026-06-19

Current World Models Lack a Persistent State Core

Authors:
Jinpeng Lu↗Dexu Zhu↗Haoyuan Shi↗Linghan Cai↗Guo Tang↗Yinda Chen↗Jie Cao↗Duyu Tang↗Yi Zhang↗Yong Dai↗Xiaozhu Ju↗

World models are increasingly regarded as a decisive step toward artificial general intelligence, yet modeling the physical world demands more than rendering convincing frames on demand: it requires an internal world state that keeps evolving over time, decoupled from observation, so that objects endure and events run to their conclusions whether or not a camera is watching, much as the moon holds to its orbit when no one is looking. This requirement is a blind spot of existing benchmarks, which reward surface properties such as fidelity, motion, and camera controllability while never asking whether a generated world keeps evolving once it is unobserved. We introduce WRBench, the first systematic diagnostic benchmark that treats camera motion as an intervention on observability and resolves evaluation into a human-calibrated chain that asks whether the camera executes the requested interaction, whether the scene stays continuous and identifiable while in view, and whether a returning target remains consistent with the event that was set in motion. Across 9{,}600 videos from 23 models spanning four control paradigms, one finding proves stubborn: current systems maintain the observed world as a tracking shot, resuming a returning target in the state at which it was abandoned rather than advancing the event while it went unseen. Because this failure recurs across control paradigms, model families, and increments of scale, robust world-state evolution does not follow from cleaner imagery, tighter control, richer geometric priors, or sheer parameter count We therefore argue that the stability of the physical state kernel and the consistency of worldlines under viewpoint intervention should become first-class objectives of world-model design, so that a world model captures how the world will unfold rather than how the next frame appears.

Read & Discuss → View Source →
11.
arXiv (CS.LG) 2026-06-11

DeMix: Debugging Training Data with Mixed Data Error Types by Investigating Influence Vectors

Authors:
Jiale Deng↗Yanyan Shen↗Xiaogang Shi↗Chai Junjun↗

arXiv:2606.11616v1 Announce Type: new Abstract: High-quality training data is essential for the success of machine learning models. However, real-world datasets often contain mixed types of errors arising from systematic flaws in data preparation pipelines, including label errors, feature errors, and spurious correlations. Effective debugging of training data requires both detecting erroneous samples and identifying their specific error types to enable targeted repair, yet existing data cleaning and attribution methods fail to adequately address this dual requirement. In this paper, we propose DeMix, a novel framework that simultaneously diagnoses erroneous samples and their error types. Our key insight is that different error types produce distinct patterns on model behavior. DeMix captures such error-specific patterns by influence vectors that characterize how each training sample affects model predictions across all validation samples. We formulate training data debugging as a multi-label classification problem where a classifier is developed to predict error types directly from influence vectors. We further introduce an intervention-based learning strategy that guides the classifier to capture invariant rationales specific to each error type, ensuring the learned classifier generalizes effectively. Empirical evaluations on 11 tasks across tabular data prediction, recommendation systems, and LLM alignment demonstrate that DeMix significantly outperforms state-of-the-art approaches, achieving a 22.61% improvement in data debugging F1-score and a 9.32% gain in task model performance after data repair. Code is available at: https://github.com/SJTU-DMTai/DeMix.

Read & Discuss → View Source →
12.
arXiv (CS.CL) 2026-06-15

SIMMER: Benchmarking Latent Failures in LLM Executable Planning with a World Model

Authors:
Xiaoxin Lu↗Ranran Haoran Zhang↗Rui Zhang↗

Large language models (LLMs) are increasingly deployed as planners for autonomous agents in household environments. While existing benchmarks evaluate whether LLM-generated plans execute successfully, they overlook a critical type of failure: latent failures. Unlike immediate failures that trigger instant feedback at execution time and enable timely correction, latent failures do not immediately halt plan execution but silently compromise goal achievement. In severe cases, they cause irreversible harm. To address this gap, we introduce SIMMER, a benchmark for evaluating latent failures in LLM planning through a human-curated symbolic world model grounded in the kitchen domain. SIMMER defines a world model comprising 77 actions, 262 unique objects, and approximately 46,800 possible interactions that are semantically realistic, derived from real-world cooking scripts. It then leverages a state machine executor that validates plans against the world model and detects immediate precondition violations, latent hazards, and irreversible failures. Experiments across six LLMs show that even frontier models achieve at most 17% error-free plans. Moreover, up to 56% of plans contain latent failures, the majority of which lead to irreversible consequences. We further demonstrate that explicit state reasoning via counterfactual foresight simulation can reduce latent failures by up to 72% and irreversible cases by up to 75%, suggesting a promising direction for more robust LLM planners.

Read & Discuss → View Source →
13.
arXiv (CS.AI) 2026-06-11

Forecasting Future Behavior as a Learning Task

Authors:
Mosh Levy↗Yoav Goldberg↗Asa Cooper Stickland↗

arXiv:2606.11445v1 Announce Type: new Abstract: Trust in an AI system is often anchored by explanations of how it works, which one then uses to forecast its behavior on new inputs. For large reasoning models (LRMs), this conventional route is particularly difficult to follow: explanation methods for single token generations do not naturally generalize to long trajectories, and the trajectories themselves are often not faithful when read as natural language. We propose an alternative that bypasses the explanation step: treat behavior forecasting as a learnable task and train Behavior Forecasters that operates on a single reasoning trajectory to make the same forecasts one would typically seek from an explanation. The forecaster's training data is obtained by querying the LRM with no human annotation, and its inference is done in a single forward pass. We instantiate this approach on two tasks: how likely the LRM is to repeat its answer on re-runs, and how removing parts of the input changes its answer. We evaluate this approach on both tasks across three diverse reasoning datasets and find that trained Behavior Forecasters are more accurate than GPT-5.4 and Claude Opus-4.6 reading the same trajectories as naive readers, at a small fraction of their inference cost. We find that fine-tuning the backbone end-to-end and initializing it from the target LRM are each necessary for strong performance. These results show that the reasoning trajectory carries information about the LRM's future behavior that goes beyond what naive reading conveys.

Read & Discuss → View Source →
14.
arXiv (CS.LG) 2026-06-18

Geometric and Stochastic Analysis of Discontinuities in Sparse Mixture-of-Experts

Authors:
Tho Tran Huu↗Huu-Tuan Nguyen↗Thien-Hai Nguyen↗Nhat-Tri Ho↗Viet-Hoang Tran↗Tho Quan↗Tan Minh Nguyen↗

arXiv:2606.19036v1 Announce Type: new Abstract: Sparse Mixture-of-Experts (SMoE) architectures are now widely deployed in state-of-the-art language and vision models, where conditional routing allows scaling to very large networks. However, this very Top-$k$ expert selection that enables conditional routing also renders the SMoE map inherently discontinuous. In the vicinity of these discontinuity surfaces, even inputs that are arbitrarily close may activate substantially different sets of experts resulting in significantly different outputs. In this work we give a rigorous geometric and stochastic analysis of these discontinuities. We first classify them by order, determined by the number of tied experts at a switching event. Using measure-theoretic slicing arguments, we establish asymptotic volume estimates for the thickened discontinuity surfaces, showing that lower-order discontinuity sets dominate, whereas higher-order ones occupy a vanishingly small relative volume. Next, modeling random perturbations in the input space via a diffusion process, we prove that the path eventually encounter a discontinuity, and moreover that the first hit almost surely occurs on an order-1 discontinuity with explicit finite-time probability bounds. We further derive occupation-time bounds that quantify the duration the random path spend in the neighborhoods of each discontinuity order. These theoretical results imply that inputs are more likely to lie near lower order discontinuities. Motivated by this insight, we propose a simple smoothing mechanism that can be directly applied to existing SMoEs, softly incorporating experts near discontinuities; our analysis guarantees that the added computational overhead remains small while providing localized smoothing near discontinuities, and experiments across language and vision tasks show that smoothing not only enforces continuity of the SMoE map but also enhances empirical performance.

Read & Discuss → View Source →
15.
arXiv (CS.AI) 2026-06-16

Cognitive Trajectory Modeling: Quantifying Human-AI Co-Creation through Cognitively Grounded Interaction Trajectories

Authors:
Nicholas Davis↗

arXiv:2606.15358v1 Announce Type: cross Abstract: Co-creative AI research increasingly seeks methods capable of representing how interaction dynamics evolve through time. While many existing approaches focus on observable interaction characteristics, interaction metrics, behavioral coding schemes, or activity traces, these methods often struggle to capture higher-order interaction dynamics, including how collaborative processes reorganize, stabilize, regulate, and evolve through time. This paper introduces Cognitive Trajectory Modeling (CTM) as a cognitive theory of interaction dynamics that conceptualizes cognition, interaction, and creative processes as temporally organized trajectories unfolding across cognitively meaningful attractor landscapes. CTM builds upon the theoretical foundations of the Enactive Model of Creativity and Creative Sense-Making (CSM), revisiting the role of sense-making curves and cognitive trajectories in representing co-creative interaction dynamics. We formalize this perspective through the Cognitive Trajectory Principle, which states that temporal representations are only theoretically interpretable as cognitive trajectories when their underlying states possess directional cognitive meaning. Building on this principle, CTM generalizes the notion of cognitive trajectories beyond any particular coding scheme and provides a broader framework for modeling interaction dynamics through trajectories unfolding across meaningful attractor landscapes. We further distinguish cognitive trajectories from interaction traces and situate CTM within a broader hierarchy of cognitive, interaction, and domain dynamics. More broadly, we argue that understanding co-creative systems requires methods capable of modeling how cognition and interaction dynamics unfold through time. CTM provides a foundation for studying interaction dynamics across co-creative AI and human-AI interaction.

Read & Discuss → View Source →
16.
arXiv (CS.CV) 2026-06-11

Reason, Then Re-reason: Cross-view Revisiting Improves Spatial Reasoning

Authors:
Chaofan Ma↗Zhenjie Mao↗Yuhuan Yang↗Fanqin Zeng↗Yue Shi↗Yingjie Zhou↗Xiaofeng Cao↗Jiangchao Yao↗

Spatial reasoning from egocentric videos is inherently challenging because the observable evidence is constrained by the camera trajectory. Existing methods rely on single-turn inference, forcing models to resolve geometric ambiguity through semantic priors rather than verifiable evidence. We argue that spatial reasoning should be revisitable: conclusions formed under limited evidence should remain open to revision when complementary viewpoints become available. Building on this insight, we propose Reason, then Re-reason (ReRe), a training-free, inference-time framework with two phases: in the Reason Phase, an MLLM forms a spatial hypothesis from the original video; in the Re-reason Phase, it verifies or revises the hypothesis by observing a synthesized novel-view video. To enable effective cross-view revisiting, we design a Geometry-to-Video pipeline that renders strategically complementary novel views from predicted 3D geometry. These views feature an elevated, oblique perspective with scene-spanning coverage, while preserving the MLLM's native video interface without architectural modifications. Extensive evaluations on VSI-Bench and STI-Bench demonstrate that ReRe substantially boosts open-source MLLMs to rival proprietary state-of-the-art performance. Project page: https://zhenjiemao.github.io/ReRe/

Read & Discuss → View Source →
17.
arXiv (CS.AI) 2026-06-17

Extracting Semantics: LLM-Guided Automatic Population of Robot Ontology from URDF

Authors:
Bastien Dussard↗Guillaume Sarthou↗

arXiv:2606.17073v1 Announce Type: cross Abstract: While commonsense knowledge may suffice for virtual agents, embodied robots interacting with humans require grounded and semantically rich representations of both their environment and their own physical embodiment. In cognitive robotics, ontologies are effective for integrating such heterogeneous knowledge to enable explainable reasoning, even during continuous knowledge updates. Yet, their manual construction remains a bottleneck. We present a preliminary approach for the automatic generation of robot semantic abstractions by transforming Unified Robot Description Format (URDF) models into populated ontologies. Although URDF files provide structural and kinematic descriptions, their identifiers often require commonsense interpretation to recover meaningful semantics, a task at which Large Language Models (LLMs) excel. Our pipeline leverages LLMs to infer semantic relationships by prompting them with concepts from an existing ontology, ensuring the final classification remains aligned with the formal model. To improve reliability, the pipeline combines majority voting across multiple LLM queries along with syntactic and schema-level validation to ensure that generated outputs conform to the expected representation format and ontology constraints. We evaluate the approach on multiple robot descriptions and discuss the generated abstractions. Initial results indicate that the proposed method can effectively bridge the gap between low-level robot descriptions and the structured, grounded knowledge representations required for human-robot interaction.

Read & Discuss → View Source →
18.
medRxiv (Medicine) 2026-06-22

The circulating blood proteome of childhood acute leukemia

Authors:
Enblad↗A. P↗Globisch↗M. A↗Gogishvili↗Tuononen↗Krali↗Lundmark↗Oksa↗Hjort↗Lysenkova Wiklander↗Holmfeldt↗…

The circulating blood proteome provides a systemic readout of disease biology and holds promise for advancing diagnostics and disease monitoring in pediatric leukemia. Here, we profiled 3072 proteins in diagnostic serum from 54 children with acute lymphoblastic leukemia (ALL), 21 with acute myeloid leukemia (AML), and 12 healthy controls using the Olink Proximity Extension Assay. We observed profound alterations in circulating protein levels in leukemia patients compared with controls and identified immunophenotype-specific proteins, including SIGLEC15 in B-cell precursor ALL (BCP-ALL), NOTCH1 in T-ALL, and CEBPA in AML, all which remained high even in patients with low (

Read & Discuss → View Source →
19.
arXiv (CS.LG) 2026-06-12

Boltzmann Attention: Learnable Ising Couplings for Cooperative Attention

Authors:
Gilhan Kim↗Daniel K. Park↗

arXiv:2606.12478v1 Announce Type: new Abstract: Attention mechanisms are central to modern sequence models, yet standard attention computes relevance primarily through individual query–key similarities. Although softmax normalization introduces competition among positions, a standard attention layer does not explicitly parameterize learnable interactions between attention decisions. This limits its ability to directly model cooperative or antagonistic co-attention structure within the attention mechanism itself. We propose Boltzmann attention, an energy-based generalization in which attention patterns are governed by an interacting Ising model. The method augments the usual data-dependent local fields with learnable pairwise couplings, allowing the model to represent inter-position correlations beyond those captured by softmax or sigmoid attention. Experiments on character-level language modeling and synthetic bracket matching show that Boltzmann attention consistently improves over standard softmax attention within a standard Transformer architecture, with the advantage becoming more pronounced as sequence length increases. A four-way ablation confirms that the improvement arises from the learnable pairwise couplings. These results suggest that explicit inter-position interactions provide a principled enhancement for attention-based sequence modeling. Moreover, the Ising formulation opens a natural path toward quantum-computing-based sampling strategies: we demonstrate that diabatic quantum annealing provides a practical training method while maintaining competitive performance with exact Boltzmann computation.

Read & Discuss → View Source →
20.
arXiv (CS.AI) 2026-06-12

Will AI Agents Free Us From Meaningless Work? A Human-Centered Analysis

Authors:
Davide Ghia↗Jaspreet Ranjit↗Tania Cerquitelli↗Daniele Quercia↗

arXiv:2606.12430v1 Announce Type: cross Abstract: Some claim that AI agents will free workers from the boring parts of their jobs, yet little is known about how workers themselves identify which tasks should be automated. Prior research focuses on occupations, overlooking that workers experience varying levels of meaning across tasks within the same role. We address this gap with a task-level analysis grounded in Graeber's theory of bullshit jobs. Using ratings from 202 workers on 171 workplace tasks, we (1) validate a five-item scale of perceived bullshitness, (2) show that perceived bullshitness strongly predicts desire for AI delegation, and (3) find that such tasks are also seen as requiring less human oversight. Together, these findings suggest that tasks perceived as bullshit are natural candidates for AI delegation, aligning worker preferences with perceived feasibility.

Read & Discuss → View Source →
21.
arXiv (CS.AI) 2026-06-15

SpheriCity: Designing Trustworthy Conversational AI for Sustainability Decision Support

Authors:
Ahmed Qayyum↗Madison Werner↗Kathryn Youngblood↗Jenna R. Jambeck↗Tahiya Chowdhury↗

arXiv:2606.13854v1 Announce Type: cross Abstract: We present SpheriCity, an expert-grounded conversational prototype designed to support trustworthy knowledge sensemaking from sustainability reports. City-level circularity assessment reports contain rich information about materials, infrastructure, and policy interventions, yet their length and heterogeneous structure make cross-document synthesis and comparison difficult for practitioners and researchers working on circular economy initiatives. While large language models (LLM) promise faster knowledge access and synthesis, their opaque reasoning, hallucinations, and lack of source transparency introduce risks for trust and interpretability, and require verification in high-stakes sustainability contexts. SpheriCity addresses these challenges through a provenance-first conversational agent that foregrounds evidence traceability, structured synthesis, and interaction scaffolds to support exploratory querying and cross-document synthesis across sustainability reports. We conducted a formative expert review with six sustainability experts using representative queries spanning cross-city comparison, policy summarization, and recommendation-oriented tasks. Experts evaluated responses across dimensions and provided qualitative reflections on the system's usefulness for sustainability knowledge work. Our results reveal that transparent sourcing, contextual explanation, interpretability, and alignment with expert workflow strongly shape expert trust and judgments of system usefulness. This work contributes (1) a conversational prototype for sustainability knowledge sensemaking, (2) an expert-grounded evaluation framework for assessing AI responses in high-stakes knowledge domains, and (3) design insights into how provenance, uncertainty communication, and integration in workflow influence expert users' trust in AI assistance for sustainability decision support.

Read & Discuss → View Source →
22.
arXiv (CS.CV) 2026-06-12

TimeLens: On-Device Artifact Recognition with Retrieval-Augmented Question Answering for the Grand Egyptian Museum

Authors:
Rawan Hesham↗Ali Ashraf↗Amr Ahmed↗Malak Alaa↗Omar Ahmed↗Omar Wagih↗

TimeLens is an AI-powered bilingual mobile guide for the Grand Egyptian Museum (GEM). Pointing a phone at an exhibit, a visitor sees the artifact recognized in real time and can ask follow-up questions answered in English or Arabic. The work addresses three problems specific to in-gallery deployment: fine-grained visual similarity among 51 catalogued artifacts (many near-identical Ramesside statues), the gap between curated training data and handheld camera conditions, and the risk of an AI guide stating unsupported historical facts. Two engineering contributions are reported. First, an on-device artifact detector was developed through a data-quality-driven iteration study – from foundation-model auto-annotation (YOLO-World), through spatial label-cleaning rules, to a fully hand-annotated dataset – isolating label quality as the decisive factor: the final YOLOv8n model resolves every previously failing class while remaining a 5.97 MB TensorFlow Lite asset that runs in real time on a mid-range phone (mAP@0.5 = 0.995, mAP@0.5:0.95 = 0.924). Second, a bilingual Retrieval-Augmented Generation (RAG) guide, grounded in a 108-record ChromaDB knowledge base, was benchmarked across seven candidate language models, with Gemma 4 E2B (Q4 K M) selected; ten targeted optimizations reduce end-to-end latency from over 30 s to approximately 10 s. Both subsystems are integrated in a production Flutter application with bilingual interface, museum location gating, and text-to-speech support.

Read & Discuss → View Source →
23.
arXiv (CS.CV) 2026-06-16

FireRed-Image-Edit-1.0 Technical Report

Authors:
Super Intelligence Team↗Changhao Qiao↗Chao Hui↗Chen Li↗Cunzheng Wang↗Dejia Song↗Jiale Zhang↗Jing Li↗Qiang Xiang↗Runqi Wang↗Shuang Sun↗Wei Zhu↗…

We present FireRed-Image-Edit, a diffusion transformer for instruction-based image editing that achieves state-of-the-art performance through systematic optimization of data curation, training methodology, and evaluation design. We construct a 1.6B-sample training corpus, comprising 900M text-to-image and 700M image editing pairs from diverse sources. After rigorous cleaning, stratification, auto-labeling, and two-stage filtering, we retain over 100M high-quality samples balanced between generation and editing, ensuring strong semantic coverage and instruction alignment. Our multi-stage training pipeline progressively builds editing capability via pre-training, supervised fine-tuning, and reinforcement learning. To improve data efficiency, we introduce a Multi-Condition Aware Bucket Sampler for variable-resolution batching and Stochastic Instruction Alignment with dynamic prompt re-indexing. To stabilize optimization and enhance controllability, we propose Asymmetric Gradient Optimization for DPO, DiffusionNFT with layout-aware OCR rewards for text editing, and a differentiable Consistency Loss for identity preservation. We further establish REDEdit-Bench, a comprehensive benchmark spanning 15 editing categories, including newly introduced beautification and low-level enhancement tasks. Extensive experiments on REDEdit-Bench and public benchmarks (ImgEdit and GEdit) demonstrate competitive or superior performance against both open-source and proprietary systems. To support future research, our code, models, and benchmark suite are publicly available at https://github.com/FireRedTeam/FireRed-Image-Edit/ .

Read & Discuss → View Source →
24.
arXiv (CS.CV) 2026-06-11

P3D-Bench: Benchmarking MLLMs for Parametric 3D Generation and Structural Reasoning

Authors:
Yikang Yang↗Zhanpeng Hu↗Youtian Lin↗Mengqi Zhou↗Jingxi Xu↗Feihu Zhang↗Jiaheng Liu↗Yao Yao↗

Multimodal large language models can write code to produce complex programs as well as use programs to do 3D modeling, which opens up a new avenue for 3D generation powered by their priors, world knowledge and reasoning. Yet existing benchmarks rarely evaluate 3D modeling through code. Such modeling demands more than runnable code: from a text or visual specification, a model must generate a parametric 3D program that is geometrically precise, semantically aligned and assembly-consistent. We introduce P3D-Bench, a benchmark for parametric 3D generation. Unlike a 3D mesh, a parametric 3D program exposes explicit dimensions, construction operations and part relations, revealing whether a model recovers a design's structure, not just its appearance. Under a unified protocol, P3D-Bench covers three task families (Text-to-3D, Image-to-3D and Assembly-3D) and scores each output for executability, geometric fidelity, topology, text-grounded constraints, multiview semantic alignment and part-level structure. We evaluate frontier MLLMs and text-only LLMs on 400 text cases, 400 image cases and 203 annotated assemblies, with domain-specific models as reference points. Our extensive evaluation yields three findings. First, assemblies are the hardest setting, where models still fail to compose multiple parts into a coherent structure. Second, models can often recover the global shape and semantic identity of the target object, yet fail to reproduce the precise parametric geometry specified by the input. Third, part-level modeling remains weak on assemblies, where models recover neither the geometry of each part nor the right number of parts. These results position P3D-Bench as a benchmark for evaluating precise parametric geometry and part-level structure in parametric 3D generation.

Read & Discuss → View Source →
25.
arXiv (quant-ph) 2026-06-17

Time-spectral control of accidental coincidences in daylight entanglement-based free-space QKD

Authors:
Jiyoung Moon↗Yonggi Jo↗Zaeill Kim↗Yong Sup Ihn↗Nam Hun Park↗

arXiv:2606.17365v1 Announce Type: new Abstract: Daylight entanglement-based free-space quantum key distribution (QKD) is limited by accidental coincidences from receiver-admitted background light. We develop and experimentally validate a receiver-level framework linking receiver bandwidth, accepted temporal width, and background-noise density to Bob singles, sifted-key rate, error rate, and quantum bit error rate (QBER) in telecom-wavelength BBM92 QKD. Indoor sweeps show that useful sifted counts saturate near the source-matched bandwidth, whereas broader bandwidth or higher background mainly increases accidental contamination. Increasing the accepted temporal width leaves Bob singles nearly unchanged but directly raises QBER by enlarging the random-overlap probability. A two-dimensional design map shows that the temporal-window margin contracts rapidly with increasing background-to-signal ratio, while the bandwidth margin remains comparatively broad near source-matched filtering. A 10 m rooftop daylight experiment demonstrates operation in the predicted low-accidental regime, yielding a mean sifted-key rate of 2,811 cps and a mean QBER of 4.43%.

Read & Discuss → View Source →