Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

02.
arXiv (CS.AI) 2026-06-25

Convex–Concave Quadratic Spectral Filtering for Graph Neural Networks

arXiv:2606.24956v1 Announce Type: cross Abstract: Spectral graph neural networks (GNNs) interpret message passing as frequency-selective filtering. While low-order spectral filters are efficient, their limited selectivity often leads to weak attenuation outside the passband, whereas high-order alternatives introduce optimization challenges. We propose DCQ-GNN, a spectral GNN based on a compact bank of adaptive convex–concave quadratic filters. By restricting the filter order to two while explicitly exploiting complementary curvature, DCQ-GNN improves spectral selectivity as quantified by Dirichlet energy and entropy measures without resorting to high-order polynomial expansions. The model fuses filter outputs through a node-adaptive gating mechanism to enable node-wise structure-aware spectral selection. We provide a formal spectral analysis grounded in Dirichlet energy attenuation, von Neumann entropy, and curvature polarity, and derive explicit characterizations of filter behavior across varying levels of homophily and structural perturbations. Extensive benchmarks on 10 datasets show that DCQ-GNN ties for the top average rank (3.0) on heterophilic graphs and obtains the second-best rank (4.2) on homophilic graphs, remaining competitive with representative high-order polynomial spectral filters. Furthermore, under strong structural perturbations, DCQ-GNN exhibits substantially smaller performance degradation compared to both first-order and high-order baselines. These results demonstrate that curvature-aware quadratic banks provide a robust and efficient alternative to high-order spectral models while preserving optimization stability and computational efficiency.

03.
Nature (Science) 2026-06-17

Optical fibre gripper for high-performance 3D micromanipulation

Authors:

Optical tweezers offer precise, non-contact control, but operate in a limited force regime and impose strict requirements on the characteristics of the targets as well as the environmental conditions1–4. Millimetre-scale mechanical tweezers can offer higher gripping force but are not suitable for precise manipulations5–11. Integrating microgrippers directly at the optical fibres provides a new approach for precise micromanipulation. However, existing fibre-integrated tweezers still face challenges in achieving high-performance manipulation of micro-objects (for example, single cells) within narrow spaces, mainly due to simplified architectures, constrained designs and millimetre-scale footprints12–14. Here we report a three-dimensional (3D) optical fibre gripper (OFG), which is fabricated by two-step, two-photon polymerization. The OFG consists of rigid photoresist microclaws and soft thermoresponsive hydrogel muscle doped with silver nanoparticles, and its size is only 38 × 38 × 61 μm3. The OFG exhibits a force-to-mass ratio of about 340 μN mg−1, outperforming previously reported fibre-integrated tweezers by one to two orders of magnitude. The OFG can manipulate opaque particles, irregular micromechanical components and diverse single-cell types. We further demonstrated its potential in 3D microassembly of complex microdevices (bearings, shafts and gearboxes) and biomimetic sampling in the narrow environment (<300 μm). These results position the OFG as a compact fibre-tip manipulator for 3D micromanipulation, offering reversible and tunable gripping in an intermediate force regime between optical field trapping and millimetre-scale mechanical tweezers. A miniature three-dimensional optical fibre gripper enables powerful, precise micromanipulation of particles and single cells in confined spaces, bridging the gap between optical and mechanical tweezers.

04.
arXiv (CS.AI) 2026-06-15

RAMAC: Multimodal Risk-Aware Offline Reinforcement Learning and the Role of Behavior Regularization

arXiv:2510.02695v3 Announce Type: replace-cross Abstract: In safety-critical domains where online data collection is infeasible, offline reinforcement learning (RL) is attractive only if policies achieve high returns without catastrophic lower-tail risk. Prior work on risk-averse offline RL achieves safety at the cost of either (i) value/model-based pessimism or (ii) restricted policy classes that limit expressiveness, whereas diffusion/flow-based expressive generative policies have largely been used in risk-neutral settings. We introduce Risk-Aware Multimodal Actor-Critic (RAMAC), a simple, modular, model-free framework that couples an expressive generative actor (e.g., diffusion/flow) with a distributional critic and optimizes a composite objective that combines Conditional Value-at-Risk (CVaR) with behavioral cloning (BC), enabling risk-sensitive learning in complex multimodal scenarios. Since out-of-distribution (OOD) actions are a major driver of catastrophic failures in offline RL, we further provide an objective-level analysis showing that controlling behavior divergence via BC suppresses OOD actions and stabilizes CVaR. Instantiating RAMAC with a diffusion actor, we illustrate these insights on a 2-D risky bandit and evaluate on Stochastic-D4RL, observing consistent gains in $\mathrm{CVaR}_{0.1}$ while maintaining strong returns. The code and experimental results are available on the \href{https://kaifukazawa.github.io/ramac-project/} {project website}

05.
arXiv (CS.AI) 2026-06-16

When Agent Automation Becomes Profitable: Quantifying and Insuring Autonomous AI Risk through Trace-Economic Underwriting

arXiv:2606.16465v1 Announce Type: new Abstract: AI agents can now take irreversible actions in operational systems, but agent-caused losses are still not clearly assigned, priced, or transferred. Providers often disclaim consequential damages, users are left with uncompensated losses, and default human review limits the efficiency gains of automation. We ask when autonomous AI deployment can become economically acceptable despite failure risk. Our answer is to quantify risk at the customer-task-trace episode level and transfer it through insurance. Automation is acceptable when its expected benefit exceeds the premium, control cost, and remaining risk. This requires a defined role with bounded permissions and comparable traces. We introduce trace-economic underwriting, which maps tool-use traces to customer exposure and claimable loss, then uses this representation for pricing, control, and risk transfer. It uses deterministic economic labels rather than an LLM judge. In our trace-to-loss testbed, trace-economic pricing reduces pricing MAE from $17.7K to $569 and removes regressive cross-subsidy. A 300-trace expert audit accepts 295 labels unchanged. On 1,000 real SWE-smith traces, trace-conditioned controls reduce CVaR95 by 72%. Theorem~1 gives a finite-sample scope condition. We release code, labels, and audit sheets.

06.
arXiv (CS.AI) 2026-06-25

Domain-Specific Agents for Cherenkov Telescope Array Control Software and Gamma-Ray Data Analysis

arXiv:2510.01299v3 Announce Type: replace-cross Abstract: We present domain-adapted large language model agents designed to support Cherenkov Telescope Array operation and data analysis. The agents combine contextual knowledge with automated validation and iterative correction to produce more reliable outputs. This approach reduces manual effort, improves consistency, and helps accelerate operational and scientific workflows. The results demonstrate the potential of agentic systems as practical assistants in specialized research environments.

07.
arXiv (CS.LG) 2026-06-11

OmniLoc: A Geometry-Aware Foundation Model for Anchor-Free UE Localization Across Diverse Indoor Environments

arXiv:2606.11490v1 Announce Type: new Abstract: Indoor localization from wireless measurements remains challenging in large-scale deployments due to substantial variation in building geometry, the set of detectable access points (APs), and the heterogeneity of received signals. Existing learning-based methods often perform well only in limited settings and degrade under environmental shifts, making robust anchor-free localization across diverse indoor environments notoriously difficult. In this paper, we present OmniLoc, an environment-interactive foundation model for anchor-free user equipment localization across diverse indoor environments. To the best of our knowledge, OmniLoc is the first foundation-model-based approach built directly on wireless measurements for this task. OmniLoc is built on three key designs. First, a unified input tokenization module converts heterogeneous wireless measurements into a common representation that is more amenable to learning. Second, a geometry-aware Transformer performs AP-aware feature extraction by emphasizing dominant APs while aggregating complementary evidence from supporting APs. Third, a geometry-aware location estimation module conditions regression on geometric embeddings to produce geometrically consistent location predictions. We evaluate OmniLoc on both a large-scale in-house dataset and a public benchmark dataset. Results show that OmniLoc significantly outperforms existing methods, consistently improves existing backbones when its design components are integrated, and demonstrates strong generalization in cross-environment evaluations.

08.
arXiv (CS.AI) 2026-06-12

Teach-and-Repeat: Accurately Extracting Operational Knowledge from Mobile Screen Demonstrations to Empower GUI Agents

arXiv:2606.12817v1 Announce Type: new Abstract: Understanding the digital world on mobile devices is shifting from static UI perception to dynamic action comprehension. This capability enables models to convert visual state transitions into operational knowledge, defined as short natural-language sentences that describe action types, target UI elements, textual arguments, and execution orders. However, due to the highly diverse and heterogeneous UI designs across applications, existing vision-language models (VLMs) struggle to accurately infer these underlying operations. To bridge this gap, we introduce Teach VLM, a core model designed to translate mobile screen trajectories into step-wise operational knowledge by extracting and analyzing operation-related keyframes from demonstration videos. To address the scarcity of aligned training data, we develop a systematic data flywheel for scalable data acquisition. We further introduce a novel Chinese Mobile Screen Teach Benchmark for fine-grained evaluation. Building upon Teach VLM, we propose the Teach-and-Repeat paradigm, where the generated operational knowledge serves as an interpretable procedural reference to guide downstream screen-based execution agents. Extensive evaluations demonstrate that Teach VLM significantly outperforms strong VLM baselines, achieving state-of-the-art performance in operation semantics prediction. Furthermore, experiments in Android World show that our paradigm yields consistent Task Success Rate improvements for downstream agents. Together, Teach VLM and the Teach-and-Repeat paradigm offer a practical pathway from raw demonstrations to reusable task automation.

09.
arXiv (CS.LG) 2026-06-17

Broadcast Product: Redefining Shape-aligned Element-wise Multiplication and Beyond

arXiv:2409.17502v2 Announce Type: replace Abstract: Broadcast operations are widely used in scientific computing libraries, yet their mathematical formulation is often implicit and inconsistently represented in machine learning literature. This problem frequently leads to invalid equations when element-wise products are written despite mismatched tensor shapes. In this paper, we formalize such operations by introducing the broadcast product $\boxdot$, which explicitly extends the Hadamard product through shape-aligned element duplication. We provide a rigorous definition of the broadcast product, analyze its algebraic properties, and show how it can be expressed using standard linear algebra. Building on this framework, we formulate least-squares problems and sketch a proof-of-concept broadcast decomposition. As a preliminary illustration, we show that the formalism enables a new family of decompositions with distinct structural properties from conventional tensor decompositions. This work establishes a mathematical foundation for broadcast-aware tensor operations, connecting practical implementations with rigorous tensor analysis.

10.
PLOS Medicine 2026-05-22

Differences in tuberculosis prevalence by sex in low- and middle-income countries over 1993–2025: A systematic review and meta-analysis

by Nicole A. Swartwood, Nanki Singh, Seyed Alireza Mortazavi, Melike Hazal Can, Hening Cui, Do Kyung Ryuk, Peter MacPherson, Katherine C. Horton, Nicolas A. Menzies Background Global and national initiatives to combat tuberculosis (TB) have expanded over recent years. Despite this, the TB burden remains high in some population groups, with men recognized as having elevated TB risks. Summary measures of sex differences in TB prevalence were last estimated in 2016. Since then, many additional prevalence surveys have been conducted, including in the highest TB burden countries. We conducted a systematic review of sex-stratified TB prevalence survey data published over 1993–2025, to provide updated estimates of male-to-female (M:F) TB prevalence ratios and determine whether sex-related disparities in TB burden have closed over time. Methods and findings We identified surveys reporting community-representative, sex-stratified estimates of pulmonary TB prevalence in low- and middle-income countries (LMICs), including surveys from an earlier review (covering January 1993–March 2016) and a new systematic review (covering 1st December 2015–13th October 2025). This review was prospectively registered with PROSPERO (CRD42024503853) and included searches of PubMed, Embase, Global Health, the Cochrane Library, Africa Index Medicus, LILACS, and SciELO. We extracted data on bacteriologically confirmed and smear-positive TB prevalence among adults (aged ≥ 15 years), stratified by sex. Risk of bias was evaluated using eight criteria specific to prevalence surveys. We fit multi-level Bayesian regression models with study- and country-level random effects to estimate the M:F ratio of TB prevalence (male prevalence divided by female prevalence), overall and for key subgroups. In meta-regression analyses, we estimated how prevalence ratios varied over time and according to known TB risk factors and TB case definitions.We identified 10,124 publications and extracted data from 100 eligible studies representing 102 unique prevalence surveys and 4,658,310 participants (45.6% male) in 33 LMICs. TB prevalence was higher in men than women in 90/102 of the included surveys, with a pooled M:F prevalence ratio of 2.02 (95% credible interval (CrI): 1.71, 2.34) for bacteriologically confirmed TB and 2.38 (95% CrI: 1.91, 2.90) for smear-positive TB. Time trend analyses showed a 2.0% (95% CrI: −0.2, 4.5%) average annual change in the M:F ratio of bacteriologically confirmed TB over the study period. The M:F prevalence ratio was estimated to be higher for countries with greater excess HIV prevalence among men, and countries with greater gender equity (as measured by the United Nation’s Gender Development Index). The estimated M:F prevalence ratio was also higher for surveys that did not restrict testing to individuals reporting TB symptoms. Study limitations include heterogeneity in survey methods and definitions, as well as limited data from the Americas, Eastern Mediterranean, and Europe WHO world regions and post-COVID-19 period. Conclusions Men in LMICs consistently experience TB at a higher prevalence than women. Time trend estimates are uncertain, but consistent with widening sex differences in TB prevalence over the last three decades, despite efforts to address the risk factors underlying this excess TB burden.

11.
arXiv (CS.LG) 2026-06-19

Probe-and-Refine Tuning of Repository Guidance for Coding Agents

arXiv:2606.20512v1 Announce Type: cross Abstract: LLM-based coding agents need higher-level operational knowledge about a repository (which files house which subsystems, how to run the test suite, which workflows have historically led to wrong fixes) that does not exist in the code itself. Engineers typically maintain \texttt{AGENTS.md} files to supply this context as instructions for coding agents, but whether they help is contested: recent studies disagree on whether LLM-generated guidance improves or harms agent performance. In this paper we show that how the guidance is produced is the decisive variable, and introduce probe-and-refine tuning: a procedure that uses synthetic bug-fix probes to iteratively diagnose and patch a repository's guidance file through single-shot LLM calls, with no agent loop or tool use during tuning. On SWE-bench Verified across four independent trials with Qwen3.5-35B-A3B at 200 steps, probe-and-refine achieves 33.0\,\% mean resolve rate vs.\ 28.3\,\% for the static knowledge base used to initialize it and 25.5\,\% for an unguided baseline ($p < 0.001$ for both probe-and-refine contrasts). The improvement comes from coverage rather than precision: refined guidance produces evaluable patches for 14.5 percentage points (pp) more instances while per-patch precision remains statistically constant ($\sim$59\,\%, $p = 0.119$), showing that improved guidance helps agents reach the correct file rather than improving the quality of the changes they make. Further, a step-budget experiment shows that guidance is what lets the agent use a larger step budget productively, and a cross-model experiment with NVIDIA-Nemotron-3-Nano-30B-A3B finds that the tuning loop degrades when the model cannot generate sufficiently diagnostic output, though per-patch precision remains constant even then.

12.
arXiv (quant-ph) 2026-06-24

Polynomial-time exact diagonalization via sparse guided eigenwalks

arXiv:2606.23967v1 Announce Type: new Abstract: Computing quantum ground states is generically difficult, but additional structure can sometimes allow diagonalization to be recast as a more feasible problem. For example, when the desired ground state is sparse in a given basis, diagonalization can be facilitated via graph search. We make this reformulation precise by introducing the eigenwalk problem, which seeks the support of a sparse eigenvector of a Hermitian matrix by exploring the graph induced by its nonzero entries. However, it is not obvious whether the relevant support vertices must always be efficiently reachable by a search on the graph. To resolve this question, we prove that for every sparse eigenvector, there exists a (possibly different) sparse eigenvector with the same eigenvalue whose support is tightly localized in the graph, with diameter scaling only linearly in the sparsity and independently of the total number of vertices. As a consequence, if a $2^n$-dimensional, $poly(n)$-sparse Hamiltonian has an $\mathcal{O}(1)$-sparse extremal eigenvector and one support element is known, then an exact eigenvector with the same eigenvalue can be computed classically in $poly(n)$ time. The same conclusion follows when the $\mathcal{O}(1)$-sparse eigenvector is non-extremal, provided that it is sparser than every eigenvector with a different eigenvalue. These results hold with no assumptions on the degeneracy, locality, spectral width, or spectral gap of the Hamiltonian, and the underlying support-localization principle also extends to problems beyond exact diagonalization, such as sparse principal component analysis.

13.
arXiv (CS.AI) 2026-06-25

Probabilistic Agents in Deterministic Audits: Evaluating Multi-Agent Systems for Automated Audits Based on the German IT-Grundschutz

arXiv:2606.25622v1 Announce Type: cross Abstract: The NIS-2 Directive mandates robust Risk Management from thousands of small and medium enterprises. To ensure compliance, companies rely on established standards such as the German IT-Grundschutz (IT-GS) of the Federal Office for Information Security. However, IT-GS certification is resource-intensive and requires a high level of manual effort for documentation, validation, and revision, making scalable implementation difficult and expensive. Building upon our previous conceptual framework, this paper presents the technical implementation and empirical evaluation of a Multi-Agent System (MAS) architecture combined with Hybrid Retrieval Augmented Generation (HybridRAG) for the partial automation of IT-GS certification. We introduce two novel technical contributions to the MAS architecture to enforce the compliance rigor. The Hypothesis-Verification Loop in the Structural Analysis (SA) phase that cross-references agent-inferred dependencies against the Knowledge Graph to reduce hallucinations, and a Decoupled Reasoning Pipeline that separates agent-driven semantic extraction from the deterministic protection need inheritance. We utilize the BSI's "RecPlast GmbH" case study as a human expert-generated reference data set for end-to-end evaluation of the architecture and to quantify Precision, Recall, and F1-scores. The performance of the system is investigated across the phases of SA, Protection Needs Assessment (PNA), Modeling, and IT-GS Check. The empirical results reveal noticeable differences throughout the different steps of IT-GS. While the MAS demonstrates high efficacy in semantic tasks (SA and Modeling), significantly reducing manual effort through automated information extraction, quantitative results reveal limitations in logical reasoning phases (PNA and IT-GS Check) as the probabilistic nature of current LLMs struggles to meet the deterministic rigor required by IT-GS.

14.
arXiv (CS.CV) 2026-06-11

MLT-Dedup: Efficient Large-Scale Online Video Deduplication via Multi-Level Representations and Spatial-Temporal Matching

The explosive growth of user-generated video content on online platforms is accompanied by the emergence of numerous near-duplicate videos–videos that are identical or highly similar but differ by partial edits. These duplicates degrade user experience and increase storage and bandwidth costs, making large-scale video deduplication a critical task. Existing video deduplication frameworks face a fundamental challenge in retrieving sufficient high-quality candidates under a limited index budget, as well as trade-offs between efficiency and precision. To address these issues, we propose MLT-Dedup, an efficient large-scale online video deduplication framework with Multi-Level representations and spatial-Temporal matching. Our approach employs a Multi-Level Video Encoder (ML-VE) to extract both fine-grained frame-level and sparse clip-level embeddings: sparse embeddings support efficient candidate retrieval, while fine-grained embeddings are loaded for precise pairwise matching. During matching, we introduce DiF-SiM, a Differential Feature-enhanced Similarity Module capable of locating duplicated temporal segments and providing reliable similarity evidence to support policy-driven deduplication decisions. Extensive experiments on a real-world large-scale platform demonstrate that MLT-Dedup reduces online repetition rates by 91% at 90% precision. Furthermore, our sparse retrieval design achieves a 5x increase in indexing capacity, enabling broader candidate coverage in real-world deployment.

15.
arXiv (CS.AI) 2026-06-11

Engineering Robustness into Personal Agents with the AI Workflow Store

arXiv:2605.10907v3 Announce Type: replace-cross Abstract: The dominant paradigm for AI agents is an "on-the-fly" loop in which agents synthesize plans and execute actions within seconds or minutes in response to user prompts. We argue that this paradigm short-circuits disciplined software engineering (SE) processes – iterative design, rigorous testing, adversarial evaluation, staged deployment, and more – that have delivered the (relatively) reliable and secure systems we use today. By focusing on rapid, real-time synthesis, are AI agents effectively delivering users improvised prototypes rather than systems fit for high-stakes scenarios in which users may unwittingly apply them? This paper argues for the need to integrate rigorous SE processes into the agentic loop to produce production-grade, hardened, and deterministically-constrained agent *workflows* that substantially outperform the potentially brittle and vulnerable results of on-the-fly synthesis. Doing so may require extra compute and time, and if so, we must amortize the cost of rigor through reuse across a broad user community. We envision an *AI Workflow Store* that consists of hardened and reusable workflows that agents can invoke with far greater reliability and security than improvised tool chains. We outline the research challenges of this vision, which stem from a broader flexibility-robustness tension that we argue requires moving beyond the ``on-the-fly'' paradigm to navigate effectively.

16.
arXiv (CS.CV) 2026-06-15

SMART: Scalable Mesh-free Aerodynamic Simulations from Raw Geometries using a Transformer-based Surrogate Model

Machine learning-based surrogate models have emerged as more efficient alternatives to numerical solvers for physical simulations over complex geometries, such as car bodies. Many existing models incorporate the simulation mesh as an additional input, thereby reducing prediction errors. However, generating a simulation mesh for new geometries is computationally costly. In contrast, mesh-free methods, which do not rely on the simulation mesh, typically incur higher errors. Motivated by these considerations, we introduce SMART, a neural surrogate model that predicts physical quantities at arbitrary query locations using only a point-cloud representation of the geometry, without requiring access to the simulation mesh. The geometry and simulation parameters are encoded into a shared latent space that captures both structural and parametric characteristics of the physical field. A physics decoder then attends to the encoder's intermediate latent representations to map spatial queries to physical quantities. Through this cross-layer interaction, the model jointly updates latent geometric features and the evolving physical field. Extensive experiments show that SMART is competitive with and often outperforms existing methods that rely on the simulation mesh as input, demonstrating its capabilities for industry-level simulations.

17.
arXiv (CS.LG) 2026-06-17

Uncertainty Quantification of Engineering Structures by Polynomial Chaos Expansion and Multivariate Active Learning

arXiv:2606.17233v1 Announce Type: new Abstract: In many engineering applications, a single high-fidelity model produces multiple quantities of interest (QoIs) under the same input parameters, e.g. finite element models of complex physical systems. To alleviate the high computational cost of direct model evaluations, surrogate models are widely used to construct efficient approximations of model responses. Naturally, the accuracy of surrogates strongly depends on the quality of the experimental design (ED). However, a single ED may not provide an adequate representation for all outputs simultaneously, especially when different outputs exhibit varying sensitivities to the input variables. A straightforward solution is to perform separate sampling for each output, but this results in increased sampling complexity and computational cost. From a statistical perspective, such an approach also ignores potential correlations among all outputs and may compromise data consistency. To address this issue, an adaptive sequential sampling method for constructing polynomial chaos expansion surrogate models is generalized for vector valued QoIs. The method sequentially selects new samples from a candidate pool based on their local contribution to the output variance, while balancing distance-based exploration of the input space and exploitation of aggregated variance information across all outputs. Its performance is compared with non-sequential Latin Hypercube Sampling through several numerical examples from engineering problems. Numerical results demonstrate that the proposed strategy improves both surrogate accuracy and stability, and provides a more reliable estimation of second-order statistics.

18.
arXiv (CS.CL) 2026-06-16

Koshur Diacritizer: A Byte-Level Sequence-to-Sequence Model for Kashmiri Diacritic Restoration

Kashmiri, an Indo-Aryan language written in a modified Perso-Arabic script, frequently omits diacritic marks in digital text, creating ambiguity and challenging downstream NLP applications. We present Koshur Diacritizer, a ByT5-small byte-level sequence-to-sequence model for restoring diacritics in Kashmiri text. To support this task, we release a publicly available dataset of 23.7k aligned undiacritized diacritized Kashmiri sentence pairs. The proposed framework combines script-aware normalization, alignment validation, and skeleton-preserving inference to ensure reliable restoration while maintaining the original base-letter sequence. Experimental results on a held-out test set achieve a DERm of 0.2012 and a WER of 0.2159. Additionally, evaluation by a native Kashmiri linguistic expert yields a mean accuracy of 77.5%. The dataset, model, and source code are publicly released to provide a reproducible baseline for Kashmiri diacritic restoration and future low-resource language research.

19.
arXiv (CS.LG) 2026-06-18

Detecting Hidden ML Training With Zero-Overhead Telemetry

arXiv:2606.19262v1 Announce Type: new Abstract: Hardware-enabled monitoring of GPU workloads underpins many proposals for AI compute governance, but if developers can defeat monitoring mechanisms, such schemes are unworkable. We evaluate the adversarial robustness of GPU workload classification using only zero-overhead, privacy-preserving NVML telemetry: content-agnostic signals that observe physical effects of computation without accessing model weights, training data, or hyperparameters. Across 5 rounds of monitor-evader iteration, we evaluate 20 evasion strategy families on 9 GPU models spanning 4 architecture generations. We develop a classifier that achieves 98.2% binary accuracy at identifying training workloads across the whole corpus, and 43-87% accuracy against the most challenging unexpected workloads even when they are adversarially disguised.

20.
arXiv (CS.CV) 2026-06-25

Articulat3D: Reconstructing Articulated Digital Twins From Monocular Videos with Geometric and Motion Constraints

Building high-fidelity digital twins of articulated objects from visual data remains a central challenge. Existing approaches depend on multi-view captures of the object in discrete, static states, which severely constrains their real-world scalability. In this paper, we introduce Articulat3D, a novel framework that constructs such digital twins from casually captured monocular videos by jointly enforcing explicit 3D geometric and motion constraints. We first propose Motion Prior-Driven Initialization, which leverages 3D point tracks to exploit the low-dimensional structure of articulated motion. By modeling scene dynamics with a compact set of motion bases, we facilitate soft decomposition of the scene into multiple rigidly moving groups. Building on this initialization, we introduce Geometric and Motion Constraints Refinement, which enforces physically plausible articulation through learnable kinematic primitives parameterized by a joint axis, a pivot point, and per-frame motion scalars, yielding reconstructions that are both geometrically accurate and temporally coherent. Extensive experiments demonstrate that Articulat3D achieves state-of-the-art performance on synthetic benchmarks and real-world casually captured monocular videos, significantly advancing the feasibility of digital twin creation under uncontrolled real-world conditions. Our project page is available at https://maxwell-zhao.github.io/Articulat3D/.

21.
arXiv (CS.LG) 2026-06-19

Stabilizing Bandits using Regularization: Precise Regret and A Quantitative Central Limit Theorem

arXiv:2603.10184v2 Announce Type: replace-cross Abstract: Statistical inference with bandit data presents fundamental challenges owing to adaptive sampling, which violates the independence assumptions underlying classical asymptotic theory. Recent work has identified stability~\citep{laiwei82} as a sufficient condition for valid inference under adaptivity. This paper first provides a refined stability condition, stated in terms of the iterates of an online algorithm, and shows that a large class of regularized stochastic-mirror-descent-style algorithms satisfy it. This refined condition allows us to strengthen the asymptotic results of~\citet{laiwei82} in several ways. First, we derive a non-asymptotic Berry–Esseen bound for the empirical reward estimates under adaptive sampling. Second, we derive matching non-asymptotic upper and lower bounds on the regret of the proposed algorithm, yielding a precise characterization of its regret. Third, we show that these regularized algorithms preserve asymptotic normality and valid inference under a prescribed level of adversarial corruption. Finally, we show that regularization is necessary rather than incidental: Lai–Wei stability is incompatible with the optimal $O(\sqrt{T})$ regret rate – the rate attained by unregularized algorithms such as EXP3 – so that a controlled, polylogarithmic inflation in regret is the price of valid inference.

22.
arXiv (quant-ph) 2026-06-25

Variants of the Quantum Phase Operator for the Harmonic Oscillator

arXiv:2606.24913v1 Announce Type: new Abstract: We introduce and study quantum phase operators associated with the Quantum Harmonic Oscillator (QHO). We show that these operators are trace-class perturbations of the Susskind-Glogower operators and examine their mathematical and physical properties. The construction is motivated by the physically relevant two-phase case.

23.
arXiv (CS.CL) 2026-06-24

Measuring User's Mental Models of Speech Translation in Human-AI Collaboration

Millions of people use machine translation (MT) tools daily, yet little is known about their perception of what systems can and cannot do. This paper studies users' mental models of speech translation systems through a new framework based on cross-lingual question answering, where users either accept MT output or request professional re-translation to answer questions based on the information presented in a foreign language. By analyzing user behavior and accuracy trends across varying translation qualities, we examine to what extent they can predict where the system is likely to be wrong, and how this mental model evolves. Users develop stronger mental models with practice, especially when they have some knowledge of the source language, primarily by relying on surface-level error cues. Moreover, providing speech transcriptions can help users develop better mental models. Our results show the promise of cross-lingual question answering as a downstream task for studying MT mental models and advancing our understanding of human-AI collaboration.

24.
arXiv (CS.CV) 2026-06-18

Intrinsic 4D Gaussian Segmentation from Scene Cues

Dynamic 4D Gaussian Splatting reconstructs deforming scenes with high fidelity and is increasingly adopted as a representation for dynamic 3D scenes. Putting such a scene to use, for editing, manipulation or motion analysis, first requires segmenting it: grouping the Gaussian primitives into coherent objects. Current pipelines obtain this grouping by importing 2D masks from foundation models such as SAM and lifting or distilling them into the Gaussian representation. In dynamic scenes these masks must be generated across many frames and views, which is costly, and the resulting segmentation can depend strongly on the quality and consistency of those external masks. We ask how much object-level structure can instead be recovered from the Gaussians themselves, and propose Intrinsic-GS, a training-free, mask-free method that builds a sparse affinity graph over Gaussian primitives from appearance, orientation, scale, deformation-trajectory and non-learned rendered-boundary cues. The graph is partitioned with Leiden community detection, requiring no foundation model and no learned feature field. On the standard 4D Gaussian segmentation benchmarks, Neu3D and HyperNeRF, Intrinsic-GS recovers substantial object structure without mask supervision, reaching 0.746 mIoU on Neu3D and 0.575 on HyperNeRF; on Neu3D, a geometry-only variant reaches 0.902 mIoU, matching SAM-supervised TRASE. On HyperNeRF, Intrinsic-GS runs 12.5x faster than the mask-generation and feature-rendering stages used by mask-supervised pipelines. These results suggest that much of the segmentation signal is already encoded in the Gaussians themselves, offering a fast, mask-free direction for 3D and 4D Gaussian segmentation that may also point toward more generalizable, robust segmentation in settings where external masks are unreliable or expensive.

25.
arXiv (CS.AI) 2026-06-16

Model-Native Computing Architecture: Envisioning Future System Architecture Through the Lens of Computer Architecture

arXiv:2606.00288v2 Announce Type: replace Abstract: Large language models are undergoing a transition from model technology to system technology. Engineering challenges like cache reuse, context capacity, agent scheduling, and permission control resemble classical computer systems problems. This raises a question: if we treat the LLM as a CPU, KV cache as processor cache, context window as main memory, and agent framework as an operating system, can decades of computer architecture wisdom guide next generation model native systems? This paper pursues this analogy as a visionary survey. We map computer architecture concepts onto the emerging model native stack, survey literature across LLM as OS, memory management, agent frameworks, tool protocols, multi agent coordination, cognitive architectures, and safety governance, finding that each addresses a different layer without a unifying model. We propose the Intelligent Computing Architecture (ICA): six functional layers with interface contracts and design axioms. We resolve the tension over whether the LLM resembles a CPU or OS via a dual plane architecture a probabilistic execution plane (what can be computed) and a deterministic control plane (what should be computed), with every layer passing through as a graded crossover. We propose three Amdahl style design heuristics Semantic Locality, Context Budget, and Agent Speedup as organizing back of envelope models, illustrate their parameter ranges with published data, and identify predictive validation as the principal open task. We articulate analogy boundaries, note differences between silicon and model era architectures, and propose a research roadmap. This is a conceptual and survey contribution with no new experimental results.