Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.CV) 2026-06-16

Explainable Task-Oriented Token Communication for AI-Native 6G Networks

The integration of Foundation Models (FMs) and wireless communications is driving the evolution of image communication from bit-accurate transmission toward task-oriented transmission. However, existing task-oriented image communication methods still face three major challenges: insufficient task-oriented Token representation, inadequate collaboration between Visual Tokens and Task Tokens, and limited interpretability of task decisions. To address these challenges, we propose an Explainable Task-Oriented Token Communication (ET-TokenCom) framework. By treating Tokens as unified units for information representation and transmission, the proposed framework constructs an end-to-end communication link that spans visual perception, wireless transmission, and task reasoning. At the transmitter, the ET-TokenCom framework extracts Visual Tokens from images to preserve low-level visual information. Meanwhile, Task Tokens generated by the FM are introduced to represent the target information and decision intent required by the current task. A Cross-Modal Attention (CMA) fusion mechanism is further designed, enabling Task Tokens to explicitly guide the selection, weighting, and transmission of Visual Tokens. At the receiver, the framework integrates Token decoding with an explainable output mechanism, where attention heatmaps are generated to highlight critical perceptual regions under different task objectives and reveal the influence of Task Tokens on the outputs. Finally, simulation results validate the effectiveness and robustness of the proposed ET-TokenCom framework.

02.
arXiv (CS.CV) 2026-06-19

Reliability-Aware Prototype Calibration for Frozen Pose-Flow Video Anomaly Detection

Pose-flow video anomaly detectors are attractive for one-class surveillance because they provide likelihood-based rankings for tracked skeleton windows. However, a single likelihood score may hide multimodal normal behavior and be sensitive to pose-observation noise. We study a frozen-detector setting in which the pose-flow backbone, cached skeleton tracks, and evaluation pipeline are fixed. Reliability-Aware Prototype Calibration (RPC) is a post-hoc score calibration method for this setting. It adds a standardized nearest-prototype deviation in the frozen latent space to the standardized flow score, and uses keypoint confidence only to gate this added geometric evidence. Thus, RPC preserves the original density signal while correcting the ranking with empirical normal-mode structure under pose reliability. Across two frozen pose-flow backbones and four datasets, RPC improves frame-level AUROC in all eight backbone-dataset pairs, with gains ranging from 0.34 to 4.49 percentage points and averaging 2.03 points. Ablation and reliability analyses show that prototype deviation is the main corrective signal, while reliability gating is most useful when pose observations are less trustworthy. These results suggest that lightweight post-hoc calibration can strengthen cached pose-flow systems when retraining or reproducing the full pose pipeline is impractical.

03.
arXiv (quant-ph) 2026-06-16

Optimizing resource bounds in direct fidelity estimation

arXiv:2606.16336v1 Announce Type: new Abstract: Direct fidelity estimation provides a way to estimate the fidelity between an experimentally prepared state and a desired pure target state without performing full tomography. Two influential formulations were introduced in 2011 by Flammia and Liu and by da Silva, Landon-Cardinal, and Poulin. In these protocols, the total estimation error is controlled through two distinct probabilistic steps: first, the fidelity is approximated using randomly sampled Pauli observables; second, each sampled expectation value is estimated from finitely many measurement outcomes. In this work we show that additional structural information about the noise can substantially sharpen the corresponding resource bounds. In particular, for some canonical channels the effective number of sampled Pauli settings can be reduced, leading to lower measurement cost both in the general pure-state setting and in the case of a stabilizer state. These results illustrate a broader point: worst-case confidence bounds in direct fidelity estimation can be significantly conservative when experimentally relevant structure is ignored. As a technical ingredient, we also revisit the allocation of the total accuracy and confidence budgets between the two probabilistic steps. Reformulating the analysis in terms of separate error parameters yields a constrained optimization problem whose solution lowers the average number of measurements in the general pure-state setting. Numerical simulations based on quantum circuits implemented in Qiskit illustrate both the improvement obtained under structured-noise assumptions and the conservativeness of the original worst-case bounds.

04.
arXiv (CS.CL) 2026-06-11

K-Forcing: Joint Next-K-Token Decoding via Push-Forward Language Modeling

Autoregressive (AR) language modeling is the dominant paradigm for text generation, yet its sequential token-by-token decoding makes inference memory-bound and inefficient. Existing acceleration approaches, such as speculative decoding and diffusion language models, can yield speedups under certain conditions but do not directly address high-load batch serving–the scenario most critical for industrial-scale deployment. We introduce K-Forcing, a push-forward language modeling paradigm for joint next-k-token decoding. K-Forcing distills an existing AR model into a conditional push-forward mapping–one that transforms independent uniform noise variables into a joint sample of multiple future tokens in a single forward pass. This design preserves fixed-length outputs, reuses the AR teacher backbone, and remains compatible with standard AR serving infrastructure. We train this mapping via progressive self-forcing distillation, which gradually expands the prediction window while enabling the student to closely match the sequence distribution of the AR teacher. We evaluate K-Forcing on LM1B and OpenWebText using a standard causal Transformer backbone. When aggressively configured to generate k = 4 tokens per forward pass, K-Forcing delivers approximately 2.4-3.5x speedup across different batch sizes, while incurring modest quality degradation relative to its AR teacher. As inference increasingly dominates the lifetime compute cost of modern LLMs, K-Forcing offers a promising route toward accelerating AR generation under real-world high-load deployment.

05.
arXiv (quant-ph) 2026-06-17

Split-Head Quantum Generative Adversarial Network for Crystalline Material Discovery

arXiv:2606.17852v1 Announce Type: new Abstract: The discovery of novel crystalline materials is a critical challenge in computational materials science, often limited by the spatial representation limitations and mode collapse typical of classical generative models. Traditionally, developing Quantum GANs for continuous 3D space is hindered by the limited capacity of near-term hardware. To overcome this, we adapt a physics-informed "split-head" architecture right from the quantum trunk to explicitly decouple macroscopic lattice bounds from microscopic atomic coordinates, significantly maximizing resource efficiency. This study disentangles the contributions of quantum circuits from these architectural priors by evaluating a Split-Head Quantum Generative Adversarial Network against an architecture-matched classical ablation model. Evaluated on the highly constrained Mg-Mn-O system, the results reveal a highly nuanced performance dichotomy between the advanced models. The architecture-matched classical ablation model demonstrated superior thermodynamic precision. Conversely, the integration of quantum circuits in the SH-QGAN drove unparalleled structural breadth and latent space exploration, more than doubling the ablation's geometric validity and successfully generating novel, metastable candidates converging on the Mg2MnO4 stoichiometry. These findings clarify that while architectural separation of cell and atom generation drives strict thermodynamic precision, quantum feature mapping independently provides the spatial diversity necessary to overcome mode collapse. Both mechanisms offer distinct, complementary enhancements for the generative discovery of advanced materials.

06.
arXiv (CS.LG) 2026-06-24

Hardware-Oriented Inference Complexity of Kolmogorov-Arnold Networks

arXiv:2604.03345v2 Announce Type: replace Abstract: Kolmogorov-Arnold Networks (KANs) have recently emerged as a powerful architecture for various machine learning applications. However, their unique structure raises significant concerns regarding their computational overhead. Existing studies primarily evaluate KAN complexity in terms of Floating-Point Operations (FLOPs) required for GPU-based training and inference. However, in many latency-sensitive and power-constrained deployment scenarios, such as neural network-driven non-linearity mitigation in optical communications or channel state estimation in wireless communications, training is performed offline and dedicated hardware accelerators are preferred over GPUs for inference. Recent hardware implementation studies report KAN complexity using platform-specific resource consumption metrics, such as Look-Up Tables, Flip-Flops, and Block RAMs. However, these metrics require a full hardware design and synthesis stage that limits their utility for early-stage architectural decisions and cross-platform comparisons. To address this, we derive generalized, platform-independent formulae for evaluating the hardware inference complexity of KANs in terms of Real Multiplications (RM), Bit Operations (BOP), and Number of Additions and Bit-Shifts (NABS). We extend our analysis across multiple KAN variants, including B-spline, Gaussian Radial Basis Function (GRBF), Chebyshev, and Fourier KANs. The proposed metrics can be computed directly from the network structure and enable a fair and straightforward inference complexity comparison between KAN and other neural network architectures.

07.
arXiv (CS.LG) 2026-06-12

Geometry of Lightning Self-Attention: Identifiability and Dimension

arXiv:2408.17221v3 Announce Type: replace Abstract: We consider function spaces defined by self-attention networks without normalization, and theoretically analyze their geometry. Since these networks are polynomial, we rely on tools from algebraic geometry. In particular, we study the identifiability of deep attention by providing a description of the generic fibers of the parametrization for an arbitrary number of layers and, as a consequence, compute the dimension of the function space. Additionally, for a single-layer model, we characterize the singular and boundary points. Finally, we formulate a conjectural extension of our results to normalized self-attention networks, prove it for a single layer, and numerically verify it in the deep case.

08.
arXiv (CS.AI) 2026-06-17

IsabeLLM: Automated Theorem Proving Applied to Formally Verifying Consensus

arXiv:2606.18098v1 Announce Type: new Abstract: Advances in Artificial Intelligence (AI) have led AI for Theorem Proving to become a promising means of formally verifying computer systems. Whilst formal verification is traditionally reserved for safety-critical systems due to the required amount of expertise and effort, AI can help to automate a large amount of this workload and make it far more accessible. Blockchain-based systems are becoming increasingly popular and are frequently targeted by malicious actors, often resulting in huge financial losses, highlighting the need to better verify these systems and mitigate vulnerabilities. Arguably the most important component of these systems is the consensus protocol, which allows nodes to agree on decisions in a potentially adversarial environment. In this paper, we improve upon IsabeLLM, the automated theorem proving tool in Isabelle. Namely, we implement a Retrieval-Augmented Generation framework, Error tracing and counterexample generation for improved context supplied to the Large Language Model. Compatibility with the latest version of Isabelle and Sledgehammer is also implemented for improved efficiency. We compare the performance of the two versions of IsabeLLM in their ability to complete the verification of Bitcoin's Proof of Work consensus.

09.
arXiv (quant-ph) 2026-06-16

On-chip semi-device-independent quantum random number generator exploiting contextuality

arXiv:2601.08392v2 Announce Type: replace Abstract: We present a semi-device-independent quantum random number generator (QRNG) based on the violation of a contextuality inequality, implemented by the integration of two silicon photonic chips. Our system combines a heralded single-photon source with a reconfigurable interferometric mesh to implement qutrit state preparation, transformations, and measurements suitable for testing a KCBS contextuality inequality. This architecture enables the generation of random numbers from the intrinsic randomness of single-photon interference in a complex optical network, while simultaneously allowing a quantitative certification of their security without requiring entanglement. We observe a contextuality violation exceeding the classical bound by more than 10{\sigma}, unambiguously confirming non-classical behavior. From this violation, we certify a conditional min-entropy per experimental round of Hmin = 0.077 +- 0.002, derived via a tailored semidefinite-programming-based security analysis. Each measurement outcome therefore contains at least 0.077 +- 0.002 bits of extractable genuine randomness, corresponding to an asymptotic generation rate of 21.7 +- 0.5 bits/s. These results establish a viable route towards general-purpose, untrusted quantum random number generators compatible with practical integrated photonic quantum networks.

10.
Nature (Science) 2026-06-17

Revealing competitive interfacial reactions in high-energy Li–S batteries

Authors:

Charge transfer at solid–liquid interfaces plays a critical role in various energy-storage systems1, particularly under dynamically varying reactant concentrations. Deciphering these intricate reaction pathways remains a substantial challenge, notably in lithium–sulfur (Li–S) batteries, in which achieving high energy density requires efficient conversion of highly concentrated lithium polysulfides (LiPSs)2,3. However, the mechanisms governing lithium sulfide (Li2S) deposition and dissolution under lean electrolyte conditions remain poorly understood. Here, using in situ liquid-cell electron microscopy, we directly visualize concentration-driven phase segregation at the electrode–electrolyte interface. Within these high-concentration interfacial layers (HCILs), competitive surface and solution dictate the charge-transfer dynamics and ultimately govern Li2S deposition at different phase boundaries. Density functional theory (DFT) calculations reveal that the aggregation of LiPSs alters molecular geometry, electronic properties and orbital hybridization, collectively facilitating charge transfer through highly concentrated LiPSs clusters. Guided by these insights, we design optimized electrodes that balance interfacial reaction pathways, enabling fast charging (4 C, 26.8 mA cm−2) and achieving high energy densities exceeding 400 Wh kg−1. These findings provide mechanistic understanding of interfacial reactions under practical working conditions and offer a design strategy to advance Li–S batteries. Visualization of concentration-driven phase segregation within high-concentration interfacial layers in the context of high-energy lithium–sulfur batteries using liquid-cell electrochemical transmission electron microscopy reveals competitive interfacial reactions under lean electrolyte conditions at different phase boundaries.

11.
arXiv (quant-ph) 2026-06-24

Low Spatial Cost CCZ Magic State Factory

arXiv:2606.24170v1 Announce Type: new Abstract: We propose a design framework for reconstructing gate-based magic state distillation protocols as compact joint-measurement architectures implementable with the surface code. The goal is to reduce the surface-code resource cost of a magic state factory while preserving the logical function and error-detection structure of the distillation protocol. We construct a reduced architecture for implementing an eight-to-three CCZ distillation protocol using smaller surface-code patches. The proposed factory preserves the single-fault-detection property and the leading-order error suppression of the protocol, while producing CCZ magic states with lower spatial cost than the design of Gidney and Fowler. The proposed design perspective can also be applied to T-state factories and other multiqubit non-Clifford resource-state factories. Our approach provides a framework for extending the design space of surface-code magic state factories beyond a single CCZ layout optimization.

12.
arXiv (CS.CL) 2026-06-24

The Warrant Gap: Claim-Conditioned Re-scoring for Fact-Checking

Fact-checking systems built on LLMs achieve high verdict accuracy on standard benchmarks, yet routinely output Supports labels whose cited evidence does not license the claim. Structured decomposition is the natural way to inspect those warrants, but rigid extraction protocols strip the full-claim context that facets need. We introduce SIFT – claim-conditioned re-scoring of extracted evidence spans against the full claim – paired with WSP (Warranted Supports Proportion), an automatic NLI check that the cited warrant entails the claim. We evaluate on FEVER, SciFact, 5PILS, and DP across four open-source backbones. SIFT recovers accuracy on cells where naive decomposition costs up to 27.6 points, while raising WSP above direct prompting; WSP itself calibrates against human gold evidence at AUC 0.92 and precision 0.98.

13.
arXiv (CS.AI) 2026-06-18

Hardware- and Vision-in-the-Loop Validation of Deep Monocular Pose Estimation for Autonomous Maritime UAV Flight

arXiv:2606.19176v1 Announce Type: cross Abstract: Autonomous UAV operations on ships require reliable vision-based relative pose estimation, yet at-sea validation is costly, weather-dependent, and risky. This paper presents a hardware-validated vision-in-the-loop framework that enables fully autonomous indoor flight while emulating photorealistic maritime environments. Rendered maritime views are processed onboard by a deep transformer-based monocular pose estimator. Delayed vision measurements are fused with high-rate IMU data using a delayed Kalman filter to provide consistent state estimates for geometric control. The system captures critical embedded effects, including perception latency, asynchronous updates, and computational constraints, that are absent in pure simulation. Autonomous takeoff, trajectory tracking, and landing experiments demonstrate stable closed-loop flight. The results establish a safe and hardware-realistic intermediate stage for developing maritime UAV autonomy prior to shipboard deployment.

14.
Nature (Science) 2026-06-10

Diverse binding poses of agonistic neurotoxins on human Na<sub>v</sub>1.6

Authors:

Voltage-gated sodium (Nav) channels are key targets of various venomous toxins. Deciphering the binding poses and mechanisms of action of representative toxins will help to dissect the functional mechanism of the channels and facilitate therapeutic development targeting Nav channels1,2. Here we present cryo-electron microscopy&nbsp;(cryo-EM) structures of distinct binding poses of three agonistic peptide toxins on the human Nav1.6–β1 channel complex. The globular β-scorpion toxin Cn2 nestles between the extracellular segment of voltage-sensing domain (VSD)&nbsp;in the second repeat of the Nav1.6 core α-unit (VSDII) and the pore extracellular loops in the third repeat of the Nav1.6 core α-unit (ECLIII), where it is stabilized by interactions with both protein regions and the branched N1372-glycan. Cone&nbsp;snail ι-conotoxin RXIA adopts an elongated conformation, spanning VSDI and VSDIV to wrap around the shoulder of the pore domain (PD). The bullet&nbsp;ant-derived toxin δ-paraponeritoxin-Pc1a exists as a transmembrane helix that stands between VSDII and PDIII. Our findings, corroborated by functional characterizations, illustrate the diversity in peptide toxin binding poses and mechanisms of action, link stabilization of the up state of VSDI or VSDII to channel activation, and provide clues to the rational design of selective Nav channel modulators. Structures of the distinct binding poses of three agonistic peptide toxins—bullet-ant-derived toxin δ-paraponeritoxin-Pc1a, cone&nbsp;snail ι-conotoxin RXIA and the globular β-scorpion toxin Cn2—on the human Nav1.6–β1 channel complex illustrate a diversity in binding poses and mechanisms of action.

15.
arXiv (quant-ph) 2026-06-24

Exponential speedup in quantum simulation of Kogut-Susskind Hamiltonian via orbifold lattice

arXiv:2506.00755v2 Announce Type: replace Abstract: We demonstrate that the orbifold lattice Hamiltonian – an approach known for its efficiency in simulating SU($N$) Yang-Mills theory and QCD on digital quantum computers – can reproduce the Kogut-Susskind Hamiltonian in a controlled limit. While the original Kogut-Susskind approach faces significant implementation challenges on quantum hardware, we show that it emerges naturally as the infinite scalar mass limit of the orbifold lattice formulation, even at finite lattice spacing. Our analysis provides both a general analytical framework applicable to SU($N$) gauge theories in arbitrary dimensions and specific numerical evidence for $(2+1)$-dimensional SU($N$) Yang-Mills theories ($N=2,3$). Using Euclidean path integral methods, we quantify the convergence rate by comparing the standard Wilson action with the orbifold lattice action, matching lattice parameters, and systematically extrapolating results as the bare scalar mass approaches infinity. This reformulation resolves longstanding technical obstacles and offers a straightforward implementation protocol for digital quantum simulation of the Kogut-Susskind Hamiltonian with exponential speedup compared to classical methods and previously known quantum methods, modulo a standard assumptions made also for the original Kogut-Susskind approach.

16.
Nature Biotechnology 2026-06-19

Efficient site-specific gene addition using R2 retrotransposons in tobacco and rice

Authors:

Precise integration of multikilobase DNA fragments remains a major technical barrier in plants. Here we introduce non-long terminal repeat (non-LTR) R2 retrotransposons as a versatile system for targeted gene integration in plants. We reconstituted R2 activity in Nicotiana benthamiana and benchmarked insertion efficiency and fidelity using a TMV-based episomal reporter system. We demonstrate site-specific integration of GFP (2.2 kb) and recombinase-compatible landing pads (0.6 kb) into 28S rDNA arrays, with intact cassette insertion frequencies up to 75% and 53%, respectively. To temporally constrain donor availability and avoid DNA intermediates, we combined in planta effector expression with recombinant RNA virus-mediated donor delivery. We apply R2 retrotransposons for targeted insertion of resistance cassettes within the rDNA of rice callus, achieving integration efficiencies up to 17%. These results position R2 retrotransposons as a double-strand break-free system for RNA-templated insertion of multikilobase gene cassettes at rDNA loci, for safe-harbor trait stacking in plants with potential applications in crop improvement and synthetic biology. Retrotransposons are applied in plants for safe-harbor transgene integration.

17.
arXiv (CS.CV) 2026-06-18

Revisiting Active Speaker Detection: An In-the-Wild Benchmark for Generalization and Robustness

We present UniTalk, a novel dataset emphasizing challenging scenarios to enhance model generalization for the task of active speaker detection (ASD). Previously established benchmarks such as AVA predominantly comprise old movies and thus exhibit significant domain gaps with real-world video. In contrast, UniTalk covers diverse video types reflecting challenging real-world conditions, including underrepresented languages, noisy backgrounds, and crowded scenes, while being on par with AVA in scale. Extensive evaluations reveal that ASD remains unsolved under realistic conditions: state-of-the-art models near-perfect on AVA fail to reach saturation on UniTalk. Conversely, models trained on UniTalk generalize better to modern in-the-wild datasets including Talkies and ASW. UniTalk thus establishes a new benchmark for ASD, providing researchers with a valuable resource for developing and evaluating versatile and resilient models.

18.
arXiv (CS.CL) 2026-06-11

Afrispeech Semantics: Evaluating Audio Semantic Reasoning in Spoken Language Models Across Domains and Accents

Audio language models (ALMs) are increasingly used for speech-based understanding, yet their ability to perform semantic reasoning beyond transcription, Text-to-Audio Retrieval, Captioning, and Question-Answering accuracy remains insufficiently benchmarked. In particular, the effects of accent variation, domain shift, and semantic over-inference on audio reasoning are poorly understood. We evaluate audio language models across five semantic and paralinguistic reasoning tasks: entailment, consistency, plausibility, accent drift, and accent restraint. Collectively, these tasks assess a model's ability to reason over spoken audio as the primary evidence source, including whether a textual hypothesis can be inferred, contradicted, or left undetermined by the audio, whether statements align or conflict with spoken content, whether claims are plausible given the discourse, and whether model predictions remain stable or appropriately constrained across accent variation. These findings highlight critical limitations in current audio reasoning evaluations and hope to provide guidance for more robust and equitable ALM design and assessment

19.
arXiv (math.PR) 2026-06-16

Geometry of critical discrete structures: long-range percolation on the hierarchical lattice and the discrete torus

arXiv:2509.09589v2 Announce Type: replace Abstract: Consider (a) balls $\Lambda_n$ of growing volumes in the $d$-dimensional hierarchical lattice, and (b) the $d$-dimensional discrete torus $\mathbb{T}_n^d$ on $n^d$ vertices. Place edges independently between each pair of vertices $x\neq y\in\Lambda_n$ or $\mathbb{T}_n^d$ with probability $1-\exp(-\beta J(x, y) )$ where $J(x, y) \asymp \| x-y \|^{-\alpha}$ for some $0

20.
arXiv (CS.AI) 2026-06-24

ASALT: Adaptive State Alignment for Lateral Transfer in Multi-agent Reinforcement Learning

arXiv:2606.24601v1 Announce Type: new Abstract: Multi-agent reinforcement learning (MARL) addresses the problem of training multiple agents that pursue collaborative, competitive, or mixed objectives. Prior work has investigated transfer learning between source and target domains in MARL; however, the majority of existing approaches impose the constraint that the dimensionalities of the observation space and the global state space must be identical across domains. In this paper, we introduce a method that explicitly accommodates mismatched state-space dimensionalities between source and target domains. The proposed approach, ASALT, incorporates both observation-level and state-level adapters that map the target-domain observations and global states into a shared embedding space, thereby enabling more effective transfer of knowledge across both actors and critics. These adapters can generate embeddings that support efficient strategy transfer across heterogeneous domains. Experimental results on multiple configurations in standard benchmark environments demonstrate that ASALT surpasses existing baselines in terms of sample efficiency and global return in cooperative settings, but its effectiveness depends on the degree of mismatch between source and target domains. Furthermore, our findings indicate that ASALT mitigates negative transfer, which frequently constitutes a major obstacle when transferring policies between domains with differing observation and action spaces.

21.
arXiv (CS.CV) 2026-06-17

Bounding Box Label Propagation for Re-Annotation of Document Layout Analysis Datasets

Datasets in practical document processing scenarios typically grow over time, and their class annotations undergo continuous refinement. This creates significant re-annotation efforts, which are time-consuming and costly. A promising remedy is to re-annotate only a small subset of available documents manually and apply semi-supervised learning techniques that leverage both labelled and unlabelled data. Although there are numerous approaches to tackle this problem for classification, there exists no adaptation for the problem of re-classifying object detection instances, e.g. for document layout analysis. To this end, we propose Bounding Box Label Propagation (BBLP), a pseudo-labelling framework for object detection. An object encoder integrates visual, textual, and positional embeddings from object detection samples to come up with a joint embedding that can be used for Label Propagation on partially annotated datasets in a plug-and-play fashion. Evaluation results indicate that the proposed approach produces high-quality class annotations of bounding boxes. In the D4LA layout analysis dataset, it achieves a mAP of 54.0%, corresponding to 81.6% of fully supervised performance, while using only 10% labelled data. Our work demonstrates the potential of Label Propagation for object detection and lays the groundwork for reducing manual annotation efforts in real-world document processing applications.

22.
arXiv (CS.AI) 2026-06-15

VISTA: View-Consistent Self-Verified Training for GUI Grounding

arXiv:2606.14579v1 Announce Type: new Abstract: When applying Group Relative Policy Optimization (GRPO) for GUI Grounding, rollouts are sampled from a single screenshot view; groups often become either all failures on difficult instances or all successes on easy ones, yielding no useful relative advantage. We propose VISTA (View-Consistent Self-Verified Training), a GRPO-based training framework that constructs each comparison group from multiple target-preserving views of the same GUI instance.Each view is generated by a crop that keeps the target element visible and remaps its box exactly, so model rollouts are compared across semantically equivalent but geometrically different inputs. To stabilize short coordinate generation without turning reinforcement learning into unconditional imitation, VISTA further adds a self-verified cross-view anchor: an oracle answer optimized with an advantage-weighted loss, excluded from the group baseline and activated only when the model has produced a maximum-reward rollout. Across five GUI-grounding benchmarks and multiple Qwen backbones, VISTA consistently improves grounding accuracy.On ScreenSpot-Pro, it raises Qwen3-VL 4B/8B/30B-A3B from 55.5/52.7/53.7 to 63.4/65.8/67.0. Robustness analyses further show higher worst-view accuracy and lower prediction flip rates.

23.
arXiv (CS.CV) 2026-06-24

MM-TRELLIS: Point-Cloud Guided Multi-Modal 3D Vehicle Generation in Autonomous Driving

Recovering realistic 3D vehicle models from autonomous driving scenes is crucial for synthesizing training data and building simulation environment. However, most existing vehicle generation methods fail to fully exploit multimodal sensors i.e. multi-view images and LiDAR point clouds) and rely on neural rendering based reconstruction, leading to low-quality mesh. Recently, native 3D generative models have made significant progress, yet they are not built for arbitrary multi-view inputs and often struggle with in-the-wild driving images. In this work, we present MM-TRELLIS, a multi-modal version of TRELLIS for in-the-wild 3D vehicle generation that integrates LiDAR and image sensors from autonomous driving datasets into native 3D generative models. Specifically, multi-view images are cycled as conditioning inputs, while LiDAR point clouds provide test-time guidance to ensure geometric accuracy and cross-view consistency. During denoising, we first align the guidance point cloud with the model priors, then enforce consistency between the generated geometry and the guidance point cloud. Finally, we introduce a voxel filtering strategy based on the opacity of 3D Gaussian Splatting to suppress floaters and produce clean meshes. Comprehensive experiments on Waymo dataset demonstrate our method outperforms existing methods in high-fidelity 3D vehicle generation. Code is available at https://github.com/HongliXiao/MM-TRELLIS.

24.
arXiv (CS.CV) 2026-06-17

TivTok: Broadcasting Time-Invariant Tokens for Scalable Video Tokenization

Video tokenization is fundamental to scalable video generation, as the number of tokens directly determines the computational cost and the length of videos that can be modeled. Existing tokenizers mainly improve scalability by compressing videos into fewer tokens, but they often continue to represent persistent content, such as static backgrounds and consistent object appearances, repeatedly across frames and chunks. In this paper, we propose TivTok (Time-Invariant Tokenizer), a reuse-aware video tokenizer that makes persistent information reusable across time. TivTok represents a clip with Time-Invariant (TIV) tokens that encode information shared across frames and Time-Variant (TV) tokens that encode frame-specific residuals. To obtain this factorization, we introduce Scope-Induced Factorization (SIF), which assigns different attention scopes to the two token groups: TIV tokens attend to the full clip, whereas each TV token only accesses its corresponding frame together with the TIV tokens. In the decoder, Invariant Broadcasting (IB) reuses the same TIV tokens across frames and chunks for parallel reconstruction and long-video tokenization. Experiments show that TivTok achieves an rFVD of 12.65 on the standard $16{\times}256{\times}256$ benchmark and improves compression efficiency by 2.91$\times$ for 128-frame videos compared with the evaluated baselines, while using only 1.1\% of the tokens required by downsample-based tokenizers in our evaluation.

25.
arXiv (CS.CL) 2026-06-18

PragReST: Self-Reinforcing Counterfactual Reasoning for Pragmatic Language Understanding

Natural language understanding often depends on meanings that are implied rather than explicitly stated, requiring pragmatic reasoning. Despite strong performance on math and logical reasoning, large language models (LLMs) still struggle with making pragmatic inferences, often choosing literal interpretations. To improve LLM pragmatic reasoning, we introduce PragReST, a self-supervised framework that constructs pragmatic QA data, generates counterfactual reasoning traces, and trains models to internalize them through supervised fine-tuning and reinforcement learning, without human-labeled training data or distillation from a stronger teacher. Across four pragmatic benchmarks (PragMega, Ludwig, MetoQA, and AltPrag), PragReST improves over backbone models, task-specific pragmatic tuning baselines, and non-counterfactual variants of the same pipeline. On accuracy-based benchmarks, PragReST improves over the instruct backbone by 5.37 and 5.50% (absolute) for Qwen3-8B and Qwen3-14B, respectively. Our error analysis and ablations underscore the importance of counterfactual reasoning: PragReST primarily reduces errors caused by failures to contrast observed utterances with plausible alternatives, and removing counterfactual reasoning substantially reduces performance. Moreover, our training preserves out-of-domain performance on general-knowledge and mathematical reasoning benchmarks.