Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.AI) 2026-06-24

THEIA: Learning Complete Kleene Three-Valued Logic in a Pure-Neural Modular Architecture

arXiv:2604.11284v5 Announce Type: replace-cross Abstract: We present THEIA, a 2.75M-parameter modular neural architecture that learns the complete Kleene three-valued logic (K3) truth table from task data without external symbolic inference or hand-encoded K3 gate primitives. Across 5 seeds it passes all 39 K3 rules at >99% per-rule accuracy. K3 learnability is not the central finding: Transformer baselines also pass all 39 rules, and flat MLPs match THEIA on Phase-1 accuracy within 0.04pp. The contributions are two properties of the learned system. (1) Uncertainty-verdict asymmetric propagation. THEIA preserves Has-Unknown at every upstream boundary (80.0/91.1/90.8/99.7% across Arith/Order/Set/Logic vs. ~52% majority) while final-verdict decodability stays at or below a 73.4% U-vs-non-U oracle reference under linear and nonlinear probes. Activation patching on non-absorbent T->U cases flips 4,898/4,898 OR and 4,719/4,719 AND pairs across 5 seeds, ruling out residual shortcuts. (2) Reliability spectrum under discretized end-to-end training, on tasks decomposable along the engine boundaries. A mod-3 sequential composition task generalizes from 5- to 500-step evaluation at 99.96+-0.04% (5 seeds). Under identical Gumbel-softmax training, flat MLPs collapse to chance by 50 steps; a 2x2 ResMLP grid reaches >=99% on only 3/20 (config, seed) trials; a pre-LN Transformer reaches 99.24+-0.34%. Straight-through discretization prevents 0.999^500 compounding; the architectural separator is sustaining Phase-1 accuracy under Phase-3 training, where flat MLPs fail. Auxiliary: under per-architecture development defaults (not optimizer-controlled), THEIA reaches 12/12 Kleene coverage 6.5x faster than a parameter-comparable 8L Transformer; this narrows to ~3.6x with Transformer-standard tuning and 4.93x with the same recipe on both. Ratios are config-specific, not asymptotic.

02.
arXiv (CS.CL) 2026-06-17

Rethinking Groups in Critic-Free RLVR

Reinforcement learning (RL) has become a central paradigm for post-training large language models. Existing critic-free RL methods typically generate a group of rollouts for the same question to estimate value baselines for advantage computation. However, this design suffers from data inefficiency, group synchronization barriers, and inflexibility with structured rollouts. In this work, we revisit the role of the ``group'' and show that its underlying function is not merely to estimate baselines but to prevent false penalties on negative samples. Building on this insight, we propose negative token filtering, a simple and effective strategy that enables stable single-rollout training. We apply it to two batch-level advantage methods, achieving comparable performance on reasoning tasks and stronger performance on agentic tasks relative to group-based RL techniques.

03.
PLOS Medicine 2026-05-20

Prescribed hormonal contraceptive use trends in the Estonian Biobank: A longitudinal observational study

by Jelisaveta Džigurski, Märt Möls, Kristi Läll, Hannah Currant, Mall Eltermaa, Estonian Biobank Research Team , Reedik Mägi, Lili Milani, Triin Laisk Background Hormonal contraceptives (HCs) are widely used and have well-documented population-level statistics. Previous studies with short follow-ups have focussed on individual HC use and side effects. However, the same aspects over longer periods, HC formulation switching, and the impact of genetic factors on HC side effects remain understudied due to the limited availability of suitable datasets. We investigated whether the Estonian Biobank (EstBB) is suitable for studying genetic risk for HC side effects. Methods and findings This is a longitudinal descriptive study combining prescribed HC purchase data collected from 2004 to 2022 with genetic and health data from 73,071 female EstBB HC users aged 15–55 at the time of purchase. HC usage was defined by the Anatomical Therapeutic Chemical (ATC) codes G02B, G03A, and G03HB01. Methods included calculating age-stratified annual user prevalence, inferring usage periods from purchases, assessing formulation switching, identifying the International Classification of Diseases, Tenth Revision (ICD-10)-based side effect-related diagnoses and thromboembolism risk factors, and assessing carrier status for Factor V Leiden (FVL, rs6025) and prothrombin G20210A (PTM, rs1799963) genetic variants as proof-of-concept. Over 19 years, 20 HC formulations with five administration routes (oral pills, transdermal patches, vaginal rings, subdermal implants, intrauterine devices) were used. In the EstBB, combined HCs were the most commonly used among users aged 15–29, while progestin-only HC use increased with age and over time, comparable to the Estonian population. Overall, 64.2% (n = 46,920) of users switched formulations at least once, with 17.7% (n = 12,929) being rapid switchers. Side effect-related diagnoses were observed in 23.1% (n = 2,982) of rapid switchers, with excessive/irregular menstrual bleeding being the most common. Genetic analysis revealed that 5.3% (n = 3,886) of users carried at least one variant previously associated with increased thrombosis risk (3.5% (n = 2,556) carried FVL only, 1.8% (n = 1,276) PTM only, and 0.07% (n = 54) both). Carriers of thrombosis-associated variants had a significantly higher percentage of thrombosis (6.5%) than non-carriers (4.2%; OR = 1.61, 95% CI [1.40, 1.84], p 

04.
medRxiv (Medicine) 2026-06-10

Assessment of the accuracy of lung lesions diagnosis in adolescents with osteosarcoma using artificial intelligence

Background. Lung metastases in osteosarcoma (OS) are the main cause of the death. The accuracy of the diagnosis of nodules by computed tomography (CT) of the lungs is critically important for determining the disseminated stage of the disease and planning surgical treatment. The use of artificial intelligence (AI) in the search for lung nodules increases the accuracy of diagnosis and reduces the chance of missing metastases. Objective: to evaluate the accuracy of lung nodules diagnosis in adolescents with OS using AI. Methods. A retrospective assessment of CT scans of adolescents with OS was performed. A pathological nodule with an average size of [≥]4 mm was considered a target finding. The diagnostic accuracy of an AI algorithm previously trained on an adult dataset was evaluated, and the number of false positives (FP) and false negatives (FN) was determined. Sensitivity, specificity, accuracy, area under the ROC curve (AUC), positive predictive value, negative predictive value, and F1-measure were calculated. Based on the obtained results, the effectiveness of the algorithm was assessed. Results. 248 CT scans of adolescents with OS were evaluated. The following results were obtained: in 5 cases, the AI algorithm showed a FP result (2.02%), in 34 cases, it showed a FN result (13.71%), and in 209 cases, a correct result (both true positive and true negative) (84.27%). The diagnostic accuracy of the algorithm was 0.843 (95% CI 0.794-0.887). The application of the AI algorithm in the practice of an X-ray doctor in a specific clinical task would allow to increase the sensitivity from 0.805 to 0.891, while ensuring an absolute decrease in the number of FN results by 8.59% and a relative decrease by 44%. Conclusion. The obtained results confirm the practical value of the application of the AI algorithm and justify the implementation of AI-assisted systems in the diagnostic protocols for lung metastases in adolescents with OS.

05.
arXiv (CS.CL) 2026-06-17

EngTrace: A Symbolic Benchmark for Verifiable Process Supervision of Engineering Reasoning

Large Language Models (LLMs) are increasingly entering specialized, safety-critical engineering workflows governed by strict quantitative standards and immutable physical laws, making rigorous evaluation of their reasoning capabilities imperative. However, existing benchmarks such as MMLU, MATH, and HumanEval assess isolated cognitive skills, failing to capture the physically grounded reasoning central to engineering, where scientific principles, quantitative modeling, and practical constraints must converge. To enable verifiable process supervision in engineering, we introduce EngTrace, a symbolic benchmark built on 90 parameterized templates, each generating unique, contamination-resistant problem instances, spanning three major engineering branches, nine core domains, and 20 distinct areas, yielding 1,350 test cases that stress-test generalization across diverse physical scenarios. Moving beyond outcome matching, we introduce a verifiable two-stage evaluation framework that uses a tiered protocol to validate intermediate reasoning traces alongside final answers through automated procedural checks and a heterogeneous AI Tribunal. Our evaluation of 27 leading LLMs reveals a distinct trade-off between numeric precision and trace fidelity, identifying a complexity cliff where abstract mathematical pre-training fails to translate into the integrative reasoning required for advanced engineering tasks.

06.
arXiv (CS.LG) 2026-06-11

SPADE: Split-and-Delay Embeddings for Autoregressive High-Granularity Calorimeter Simulation

arXiv:2606.11304v1 Announce Type: cross Abstract: We introduce SPADE (SPlit And Delay Embeddings), an autoregressive transformer for sequences whose tokens carry multiple features. Rather than embedding these features jointly, SPADE embeds them independently. Delaying each feature stream relative to the previous one allows intra-token correlations to be learned by the standard self-attention mechanism. Applied to point-cloud calorimeter shower generation in the highly granular ILD detector, SPADE is competitive with the state of the art AllShowers model on photon showers, and substantially outperforms its VQ-VAE-based predecessor OmniJet-$\alpha_C$. The mechanism is applicable to any generative task with multi-feature tokens, enabling LLM-style pretraining workflows for higher-dimensional data.

07.
arXiv (quant-ph) 2026-06-11

Fabricating fiber cavity mirror substrates compatible with high coupling efficiency

arXiv:2606.12168v1 Announce Type: cross Abstract: Fiber optical cavities offer small mode volumes and correspondingly strong light-matter interactions in an open Fabry-Perot geometry. However, existing fabrication techniques do not reliably produce substrates with surface profiles amenable to high mode matching between the cavity mode and fiber core, thereby limiting the achievable collection efficiency. Here we present a technique to fabricate fiber mirror substrates while using $in situ$ reflectometry to constrain the achievable mode matching prior to coating. By measuring the back-reflection from freshly cleaved fiber tips, we pre-select 138 fibers compatible with 96.5-99.5% mode matching, and after a single CO$_2$ laser ablation pulse, these fibers remained compatible with 95.3-99.2\%. This simple technique provides rapid feedback during each stage of substrate fabrication, greatly enhancing the yield of viable fiber mirror substrates prior to (expensive) coating runs.

08.
arXiv (CS.AI) 2026-06-18

ProfiLLM: Utility-Aligned Agentic User Profiling for Industrial Ride-Hailing Dispatch

arXiv:2606.18803v1 Announce Type: new Abstract: Bringing Large Language Models (LLMs) into industrial ride-hailing dispatch as semantic feature extractors over platform-scale behavioral logs is a compelling but under-explored data systems problem. Production matching pipelines remain dominated by structured numerical features, yet decisive behavioral signals (e.g., a driver's habitual aversion to certain regions) are inherently contextual and naturally expressible as LLM-generated user profiles. However, scaling such profiling to a live, millisecond-latency dispatcher faces three intertwined constraints rarely addressed together: on a platform with millions of daily orders, logs exceed any LLM's context window by orders of magnitude; most users are long-tail, with too few interactions for per-user profiling; and surface-fluent profiles do not necessarily improve downstream prediction utility. We present ProfiLLM, an agentic LLM data pipeline that operationalizes utility-aligned user profiling for production matching systems through two modules. (1) Tool-Augmented Global Knowledge Mining equips an LLM agent with 27 analytical tools to mine platform-scale data, producing reusable global knowledge, adaptive user clustering rules, and region-level supply-demand priors. (2) Utility-Aligned Profile Exploration generates multiple candidate profiles per cluster, evaluates them via a lightweight downstream utility proxy, iteratively refines the best candidates and constructs preference pairs for DPO fine-tuning. Deployed on DiDi's production dispatcher, ProfiLLM achieves up to +6.14% relative AUC improvement in outcome prediction, up to +4.35% GMV gain in dispatching simulation, and consistent improvements in a 14-day online A/B test including +0.47% GMV, +0.33% Completion Rate, and -0.82% Cancel-Before-Accept rate.

09.
arXiv (CS.AI) 2026-06-16

Task-guided cross-subject latent alignment: a multi-encoder-decoder VAE

arXiv:2606.15989v1 Announce Type: cross Abstract: Aligning neural activity across subjects offers the promise of discovering shared computational principles and generalizable decoders. However, traditional alignment methods require shared stimuli across subjects, a constraint that limits applicability to naturalistic paradigms with limited or non-overlapping data. We introduce a Multi-Encoder-Decoder Variational Autoencoder (MED-VAE) that achieves cross-subject alignment without shared stimuli by anchoring representations to a common scaffold provided by a pretrained ANN. Using the Natural Scenes Dataset, we show that MED-VAE creates common latent spaces with superior semantic organisation, achieving higher cross-subject alignment than common methods while maintaining robust generalisation to held-out stimuli where traditional methods degrade. Reconstructing from these common spaces back to each subject's original neural space, MED-VAE preserves equal stimulus-driven signal in its cross-subject latent space. Finally, we show that this superior alignment directly enables cross-subject neural prediction, as demonstrated via cross-subject image decoding. In summary, we introduce a framework to identify generalisable common subspaces for cross-subject predictions and downstream tasks, demonstrated here for visual cortex responses to static images.

10.
arXiv (CS.CV) 2026-06-17

Structured Adversarial Camouflage via Voronoi Diagrams

Pixel-wise adversarial patches are computationally heavy and often visually detectable, limiting utility in security-critical systems. We present adversarial Voronoi camouflage that optimizes only seed-point locations under fixed, printable palettes using a soft assignment, producing structured, splinter camouflage-like patterns without additional regularization. Evaluated on person detection with COCO-style AP@[.5:.95], naive placement (Inria -> COCO) performs comparably bad, while garment-level application via segmentation mask (3DPeople) results in a significant AP drop. The attack transfers to out-of-domain backgrounds and across detector families (YOLOv9/10/11/12), indicating robustness in black-box settings. Repainting with different palettes largely nullifies the effect, and single-color tweaks show limited tolerance (

11.
arXiv (CS.AI) 2026-06-17

Distributed General-Purpose Agent Networks: Architecture, Key Mechanisms, and Prototypes

arXiv:2606.17368v1 Announce Type: new Abstract: Large language models have accelerated the transition from passive conversational assistants to autonomous agents that can understand goals, plan actions, invoke tools, and execute multi-step tasks. Yet the capability of a single agent remains constrained by its local data, tool permissions, runtime environment, and governance boundary. This paper studies distributed general-purpose agent networks: open peer-to-peer networks in which heterogeneous agents deployed on personal devices, edge nodes, or autonomous computing environments can discover one another, establish trust, negotiate cooperation rules, and execute open-ended tasks. We argue that such networks cannot be obtained by simply combining existing peer-to-peer overlays with conventional multi-agent systems. Unlike traditional P2P networks, agent networks must propagate semantic declarations about intentions, capabilities, states, and cooperation constraints. We therefore propose a layered architecture centered on a protocol adaptation layer that connects upper-level task semantics with lower-level network operations. Based on this architecture, the paper identifies three core mechanism problems: semantic announcement propagation for collaborator discovery, verifiable identity and multi-topic reputation for cooperation governance, and semantic-gradient mechanism design for open task execution. For each problem, we present a technical route, including bodyless gossip with sequential logs, BAID-based identity binding with MG-EigenTrust reputation, and a Stackelberg-style mechanism-generation loop driven by semantic attribution feedback. We further report prototype overhead results for BAID-style tiered verification and mechanism-level simulations of MG-EigenTrust under cross-topic disguise-collusion attacks. The resulting framework provides a system-level foundation for open, trustworthy, and scalable agent collaboration.

12.
medRxiv (Medicine) 2026-06-18

Guiding the development of climate counterfactuals for health impact attribution studies

Climate change detection and attribution (D&A) methods have become vital for quantifying the influence of anthropogenic forcing on the Earth's systems, including human health. Health impact attribution (HIA) studies seek to disentangle climate-driven health effects from natural variability yet are often constrained by the availability of accessible counterfactual climate scenarios. This tutorial paper presents a flexible, reproducible framework for developing counterfactual climates without reliance on computationally intensive global circulation models. We provide practical, R-based methodologies for constructing both trend-based (temperature and non-temperature) and event-based counterfactual, using a variety of techniques including model residual detrending, data-driven decomposition (e.g., Singular Spectrum Analysis and Empirical Mode Decomposition) and stochastic weather generators. The tutorial also explores the incorporation of greenhouse gas concentrations as forcing variables, rather than global mean temperature anomalies. By operationalising these methods through worked examples and an open code repository, this paper aims to build capacity within the HIA community, enhance methodological transparency, and foster interdisciplinary collaboration between climate and health researchers.

13.
arXiv (CS.LG) 2026-06-17

Learning Survival Models with Right-Censored Reporting Delays

arXiv:2510.04421v3 Announce Type: replace-cross Abstract: Survival analysis provides statistical methods to model the time until an event occurs. Reporting delays arise when event times are not observed at their occurrence but are only revealed upon reporting. This issue is particularly critical for timely risk evaluation when the observation window is short due to administrative censoring. In this study, we incorporate right-censored reporting delays by jointly modeling parametric hazards for the event and reporting processes. We then construct a consistent estimator for the model parameters and develop a Monte Carlo expectation-maximization algorithm to compute it. To address the challenges posed by administrative censoring, we leverage these findings and propose a transfer-learning procedure. Experimental results demonstrate that our method improves the accuracy of timely risk evaluation under administrative censoring.

14.
arXiv (CS.AI) 2026-06-24

Alternate loss functions and regression models that achieve robustness to outliers by modulating the learning rate

arXiv:2606.22068v2 Announce Type: replace-cross Abstract: Most real-world datasets used for training supervised learning models are contaminated with noisy data and outliers leading to large prediction errors. This paper proposes a new approach for achieving robustness where the learning rate is modulated by a factor that is sensitive to outliers. In this approach a reduction of the learning rate is shown to be achieved by using alternate loss functions that are infinitely differentiable, strictly convex or quasiconvex and more closely approximate the absolute error than Huber and log-cosh losses. A comparison of the performance of regression models trained with different loss functions on a wide variety of benchmarks and datasets is presented to demonstrate the superior performance of the Square Root Loss (SRL) and Smooth Mean Absolute Error (SMAE) losses proposed in this paper. Two new robust linear regression models are presented. Highly vectorized robust parameter update formulae that take advantage of modern GPUs for both stochastic and batch gradient descent are presented.

15.
arXiv (CS.AI) 2026-06-11

TileFuse: A Fused Mixed-Precision Kernel Library for Efficient Quantized LLM Inference on AMD NPUs

arXiv:2606.11357v1 Announce Type: cross Abstract: With the growing demand for on-device LLM inference, edge SoCs increasingly integrate NPUs to improve performance and energy efficiency under tight power and thermal budgets. However, practical LLM deployment on current client NPUs remains difficult: widely used quantization formats such as AWQ do not map cleanly onto many existing NPU software stacks, which are often proprietary and expose limited low-level control. In this work, we present TileFuse, a close-to-metal mixed-precision kernel library for AMD XDNA2 NPUs that targets transformer linear layers in quantized LLM inference. TileFuse brings practical low-bit formats such as AWQ-style W4A16 and W8A16 directly onto XDNA2, rather than forcing the model to be reshaped around an NPU-specific quantization scheme. TileFuse co-designs weight layout, metadata placement, mixed-precision microkernels, and array-level dataflow. Specifically, it fuses unpacking, dequantization, and GEMM/GEMV execution into a single kernel flow, introduces an interleaved pre-tiling layout that supports GEMM dimensions up to 32K, and redesigns GEMV dataflow to utilize the full 4x8 AIE array. Across kernel-level evaluations, TileFuse improves performance by up to 121.6% for GEMM and 281% for GEMV over full-precision baselines, while delivering more than 2x performance and energy-efficiency gains over strong iGPU baselines on GEMM. In end-to-end LLM experiments on Ryzen AI laptops, TileFuse achieves up to 2.0x lower prefilling latency with more than 64.6% lower energy consumption. Together, these results show that XDNA2 is a practical target for AWQ-style edge LLM inference and that native NPU support for off-the-shelf quantization can make NPUs substantially more usable in real client deployments.

16.
medRxiv (Medicine) 2026-06-17

Perceptions of aging well among older adults with heart failure: insights from a qualitative study

Background: Heart failure (HF) is a prevalent and often debilitating cardiovascular condition among older adults, frequently accompanied by multimorbidity, functional limitations, and the need to age in place. Traditional models of successful aging emphasize disease absence and preserved function, yet most individuals with HF live with ongoing symptoms and chronic health challenges. How older adults with HF define aging well, particularly across different socioeconomic contexts, remains underexplored. Objectives: To explore how older adults with HF conceptualize aging well and to identify perceived facilitators and barriers across more and less resourced New York City neighborhoods. Methods: We conducted semi-structured interviews with 20 adults diagnosed with HF residing in Manhattan and Brooklyn neighborhoods classified by 2019 United States Census data. Interviews were guided by Rowe and Kahn's model. Transcripts were analyzed using an inductive-deductive thematic approach and interpreted in alignment with the Healthy People 2030 framework. Results: Participants had a mean age of 69 years; 50% identified as Black and 50% were women. Despite functional limitations, 65% reported aging well. Five themes emerged: maintaining physical function, maintaining cognitive function, sustaining social relationships, avoiding pain, and promoting overall well-being. Avoiding pain and promoting well-being extended beyond traditional models. Neighborhood context shaped priorities, with financial stability emphasized in more affluent areas and social cohesion prioritized in less affluent communities. Conclusions: Older adults with HF frequently perceive themselves as aging well despite chronic illness, reframing successful aging beyond disease avoidance. These findings support a patient-centered, place-informed model of aging well with implications for healthcare delivery and policy.

17.
arXiv (CS.CV) 2026-06-24

3D Masked Autoencoders are Robust Learners of Volumetric and Multimodal Cellular Representations for Microscopy

Self-supervised learning in fluorescence microscopy often relies on 2D projections, despite the inherently three-dimensional nature of cells. We present a systematic comparison of 2D and 3D masked autoencoders (MAE-2D vs. MAE-3D) on volumetric microscopy data. Under matched architectures and training protocols, MAE-3D consistently outperforms 2D max-projection and slice-based variants on downstream single-cell tasks. We further align visual representations with a pretrained protein language model (ESM2) and show that cross-modal supervision yields larger gains for volumetric models. Channel cross-attention and frequency-domain regularization are critical for leveraging 3D spatial context. On a protein–protein interaction task, MAE-3D achieves a ROC–AUC of 0.865, outperforming prior methods by up to +0.025. For protein localization, our best 3D model attains state-of-the-art AUC$_{micro}$ (0.952) and F1$_{micro}$ (0.742), improving over previous approaches by +0.003 and +0.010 absolute, respectively. Overall, these results demonstrate the advantages of native 3D modeling and multimodal alignment for representation learning in single-cell microscopy.

18.
arXiv (CS.CL) 2026-06-24

WAND: Windowed Attention and Knowledge Distillation for Efficient Autoregressive Text-to-Speech Models

Recent decoder-only autoregressive text-to-speech (AR-TTS) models produce high-fidelity speech, but their memory and compute costs scale quadratically with sequence length due to full self-attention. In this paper, we propose WAND, Windowed Attention and Knowledge Distillation, a framework that adapts pretrained AR-TTS models to operate with constant computational and memory complexity. WAND separates the attention mechanism into two: persistent global attention over conditioning tokens and local sliding-window attention over generated tokens. To stabilize fine-tuning, we employ a curriculum learning strategy that progressively tightens the attention window. We further utilize knowledge distillation from a full-attention teacher to recover high-fidelity synthesis quality with high data efficiency. Evaluated on three modern AR-TTS models, WAND preserves the original quality while achieving up to 66.2% KV cache memory reduction and length-invariant, near-constant per-step latency.

19.
arXiv (CS.AI) 2026-06-24

Navigating User Behavior toward Personalized Multimodal Generation

arXiv:2606.24196v1 Announce Type: new Abstract: Modern AIGC pipelines deliver high-fidelity images and videos but presuppose a well-formed creation instruction, while end users rarely articulate visual details, leaving generators misaligned with user demand. We study personalized content generation, which turns a user's interaction history into an executable instruction for downstream synthesis, and identify two obstacles: behavior must be encoded in a form legible to language reasoning, and the model must acquire instruction-writing skill absent from both pretraining and behavior data. We propose NaviGen, which represents each item with a dual identifier coupling a collaborative code and a textual code as a behavioral substrate and a semantic bridge in one token stream. On this representation, a two-stage SFT+RL pipeline first distills preference reasoning and instruction writing from evolutionarily searched supervision, then aligns generation with user intent through hierarchical and self-consistent rewards. Experiments across product, game, and short-video domains show that NaviGen improves personalized image and video generation, strengthens next-item prediction, and yields more specific, relevant, and visually generatable instructions. Our code is anonymously released at: https://github.com/iLearn-Lab/NaviGen.

20.
arXiv (quant-ph) 2026-06-24

Offline Channel-Independent QAOA Angles for RIS Power Aggregation: Unit-Circle Phase Dictionaries and Infinite-Size Spin-Glass Limits

arXiv:2606.24540v1 Announce Type: new Abstract: Reconfigurable intelligent surfaces (RIS) maximize received power by setting per-element phases. Discrete-phase optimization is NP-hard in the worst case, while the quantum approximate optimization algorithm (QAOA) applied to RIS faces limited phase alphabets, either per-problem angle optimization or uncharacterized training cost exposed to barren plateaus, and no scalable performance benchmark. We introduce a $2^{M}$-phase $\theta$ dictionary for optimizing power $\|\mathbf{A} \, e^{j\theta}\|^{2}$ having $K \times N$ channel matrix $\mathbf{A}$ and QAOA angle offline optimization with instance and size-independent infinite-size limit of the mixed-$q$ Gaussian ensemble of Basso et al. Our design bounds the spin-Hamiltonian interaction order to at most quartic for any $M$, and the deployed order-2 reduction lies below the even-$q\!\ge\!4$ regime in which constant-level QAOA limitations are proved. We perform analytical, state-vector, matrix-product-state and Pauli-path-simulation numerical studies for $N=K \leq 100$ and QAOA depth $p=9$, verifying offline angle transfer to Rayleigh, Rician/line-of-sight, cascaded double-fading and spatially-correlated RIS channels at $N\!\in\!\{5,12\}$. We observe performance reaching a near-optimal multi-start single-flip local-search reference for $N\!\le\!16$ under order-2 modeling with $2^{5}{=}32$-phase dictionary while the order-4 model shows a performance ceiling below the classical reference. The approach suggests a route to near-optimal large-$N$ performance on future fault-tolerant (FTQ) quantum computers, which enable the higher-depth QAOA circuits.

21.
arXiv (CS.LG) 2026-06-15

DTVEM-RE: A Hierarchical Random-Effects Extension of the Differential Time-Varying Effect Model for Person-Specific Multi-Lag Estimation in Intensive Longitudinal Data

arXiv:2606.14116v1 Announce Type: new Abstract: The Differential Time-Varying Effect Model (DTVEM) of Jacobson et al. (2019) is a popular tool for finding the best time lag in intensive longitudinal data, but it assumes everyone shares the same lag structure. The original authors named fixing this as future work, and it clashes with the premise of modern clinical research, which is that people differ. We present DTVEM-RE, an extension that lets each person have their own lag coefficients, with two versions of the confirmatory step: a discrete-time hierarchical Bayesian VAR in Stan, which pools across people and gives calibrated uncertainty, and a continuous-time per-person Ornstein-Uhlenbeck model in ctsem, which handles unevenly spaced beeps directly. We report four results. A simulation shows the Bayesian version recovers the between-person spread tau_a with bias below 0.01 and coverage of 90 to 93 percent. On the Fisher et al. (2017) EMA dataset (N=40), person-specific lag-1 effects vary by an order of magnitude across three mood items, the Bayesian and GAMM estimates agree closely (r=0.87 to 0.92), and DTVEM-RE gives the best one-step-ahead prediction among four discrete-time methods. A multi-lag version shows all nine tau_k values have credible intervals excluding zero, and the lag where people differ most changes across items, something lag-1-only methods like mlVAR cannot detect. Finally, the two versions agree almost exactly on person-specific lag-1 estimates (r >= 0.995), differing only as shrinkage predicts. DTVEM-RE is, to our knowledge, the first person-specific implementation of DTVEM-style lag detection, and it contains standard DTVEM as a special case.

22.
arXiv (CS.LG) 2026-06-16

Machine learning enables roughness-driven inverse design of milling processes

arXiv:2606.16032v1 Announce Type: cross Abstract: Interest in applying data-driven approaches in manufacturing has grown significantly, particularly for mapping complex, high-dimensional relationships. The milling process is one area where predictive models can link influential parameters to surface roughness metrics prior to in situ operations. While this approach offers clear advantages, it faces challenges due to limited datasets and robustness issues in inverse design paradigms. To address these challenges, this paper proposes a machine learning (ML)-based framework for the inverse design of the surface milling process, with a focus on surface roughness as the design objective. The framework employs forward training of two ML models, a deep neural network (DNN) and a random forest (RF) ensemble, both developed using a high-fidelity synthetic dataset generated from a computational simulation framework. These trained models are integrated into a Bayesian optimization (BO) procedure to overcome the multiplicity problem arising from the many-to-one mapping inherent in the dataset. The approach identifies top-performing milling process configurations, considering both process and tool parameters, and presents them from the full solution space. The models achieve average relative errors below 5% when compared to reference results, thereby demonstrating the robustness and reliability of the proposed methodology.

23.
arXiv (CS.LG) 2026-06-16

TriAdReview: Triangular Adversarial Review Architecture for Multi-Model Technical Document Generation

arXiv:2606.15074v1 Announce Type: new Abstract: Large language models (LLMs) are increasingly used for technical document generation, yet single-model outputs often suffer from over-engineering, security blind spots, and incomplete coverage. We propose TriAdReview, a triangular adversarial review architecture that employs two independent reviewer models (engineering and boundary perspectives) and a triangular judging mechanism to iteratively improve a generator model's output. We evaluate TriAdReview across five benchmark tasks - architecture design, code generation, proposal review, security audit, and requirements analysis - using three configurations: single model (baseline), dual model (single review), and triple model (full system). Results across 75 experiments (n=5 per cell) show that the triple model configuration achieves a 10.1% overall improvement over the single model baseline (26.2 vs. 23.8 out of 50; p

24.
arXiv (CS.LG) 2026-06-19

A Hybrid GNN-FEM Framework for Phase-Field Fracture Simulation. Physics-Preserving Hybridization for Generalizable Surrogate Modeling

arXiv:2606.19378v1 Announce Type: new Abstract: Scientific machine learning (SciML) has emerged as a promising approach for accelerating simulations of complex physical systems, yet achieving physically consistent and generalizable predictions for nonlinear, history-dependent problems remains a central challenge. In this study, we propose a hybrid GNN–FEM framework for efficient and generalizable phase-field fracture modeling. While phase-field approaches provide a robust variational framework for simulating complex crack evolution, their high computational cost limits practical applications because they require solving coupled, nonlinear, and history-dependent systems within an incremental finite element procedure. To address this challenge, a graph neural network surrogate is integrated into the conventional staggered scheme, replacing the phase-field update at each load increment while retaining the FEM-based displacement solver to enforce mechanical equilibrium and boundary conditions. By preserving the incremental solution structure, the framework remains consistent with history-dependent fracture evolution without requiring the surrogate to approximate the full solution trajectory. This selective surrogate strategy emphasizes the identification of a physically meaningful and incrementally structured learning target, rather than relying on brute-force data generation to learn the full fracture process. The proposed framework achieves strong generalization across varying geometries, loading conditions, material properties, and discretizations through dimensionless feature design, a graph-based formulation on mesh-based domains, and a physics-informed loss derived from the governing phase-field equation. Numerical experiments demonstrate that the hybrid approach reduces computational cost while maintaining accuracy compared with conventional FEM, and exhibits robust predictive performance across diverse problem settings.

25.
arXiv (CS.AI) 2026-06-17

Reversal Q-Learning

arXiv:2606.17551v1 Announce Type: cross Abstract: Iterative generative modeling techniques, such as flow matching, provide powerful tools to model complex behaviors for effective offline reinforcement learning (RL). In this work, we propose a new off-policy RL algorithm that trains a flow policy based on prior data. Our idea starts from the "expanded" Markov decision process (MDP) framework, which treats individual flow refinement steps as separate actions in an MDP. To enable off-policy RL within this framework, we apply two techniques: we generate virtual on-policy trajectories (by "reversing" flows) to make this framework compatible with prior data, and we apply a bias-and-variance reduction technique to mitigate the curse of horizon in off-policy RL. We call the resulting algorithm Reversal Q-learning (RQL). RQL has several advantages over previous flow-based RL methods: it does not suffer from backpropagation through time, makes better use of the learned value function, and directly trains the full, expressive flow policy. Through our experiments on 50 challenging simulated robotic tasks, we show that RQL leads to the best average offline RL performance compared to state-of-the-art flow-based offline RL algorithms.