Inspiring, shaping and sustaining an African research & development agenda
Why Africa needs regional R&D hubs for basic science and translation research to accelerate local manufacturing.
Academic Intelligence · Curated Daily
AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.
Why Africa needs regional R&D hubs for basic science and translation research to accelerate local manufacturing.
Composed Image Retrieval (CIR) constitutes a pivotal paradigm requiring models to perform joint reasoning on reference images and modification texts. However, the prevalence of Noisy Triplet Correspondence (NTC) in large-scale datasets severely constrains model performance. Existing denoising methods either target binary mismatches or rely on scalar-based point-wise estimation, neglecting rich global structural correlations among sample populations and dynamic value variations during training, thereby yielding suboptimal results. This paper identifies two critical unresolved challenges: Global Structural Inconsistency of Semantic Correlations and Hard Sample Discrimination Uncertainty. To address these, we propose RankVR, a framework designed to construct a robust CIR model via global structure consistency and dynamic value perception. Specifically, we introduce the Global Structure Consistency Perception (GSCP) module, which utilizes the Effective Rank of the Correlation Matrix to decouple clean samples from structural noise. By measuring rank difference, GSCP identifies samples disrupting macroscopic semantic symmetry. Furthermore, we develop the Adaptive Semantic Value Calibration (ASVC) module to distinguish high-value hard clean samples. By integrating training potential and reliability, it dynamically quantifies the semantic value of each triplet, ensuring effective utilization of hard samples while suppressing noise characterized by logical conflicts. Extensive experiments on the FashionIQ and CIRR benchmark datasets demonstrate that RankVR significantly outperforms existing state-of-the-art methods, validating its superior robustness in noisy environments.
arXiv:2606.24344v1 Announce Type: cross Abstract: ODRL policy evaluators produce verdicts, but say nothing about the normative positions a policy brings into existence, the authority structures those positions presuppose, or who holds the power to declare a norm violated. We formulate the Cross-Level Design Principle: any normative language with violable, consequential norms requires both conduct-level positions (Permission, Duty, Right, No right) and competence-level positions (Power, Subjection, Immunity, Disability). Applying this to ODRL, we establish that prohibition is sanctioned (violation possible and consequential), that permission is underspecified across its behaviour parameter (open vs. closed world), and that the formal semantics covers achievement obligations only. We ground ODRL in UFO-L, mapping each activated rule to a simple legal relator and extending coverage from two to eight legal positions; violation-declaration authority, implicit in every existing evaluator, becomes an explicit Power-Subjection pair. All axioms are mechanically verified in Isabelle/HOL and across a 39-problem benchmark under Vampire, E, and Z3.
arXiv:2606.16038v1 Announce Type: cross Abstract: The path toward autonomous software engineering is currently bottlenecked by a severe deficit of diverse, large-scale trajectory data. We address this by introducing \ourdataset, an expansive dataset of 207,489 agentic trajectories spanning nine programming languages (Python, Go, TS, JS, Rust, Java, PHP, C, C++). Sourced from 20,000 real-world PRs via OpenHands and SWE-agent harnesses, the dataset utilizes a hybrid-reasoning synthesis: Minimax-M2.5 generates trajectories with explicit "thinking" processes, while Qwen3.5-122B provides high-quality "non-thinking" traces. Filtered for permissive licenses (MIT, Apache, BSD) from SWE-rebench-V2, this data facilitates the training of models capable of long-horizon reasoning. We validate the dataset by fine-tuning the Qwen3-30B-A3B series (Thinking, Instruct, and Coder). The best performing model achieves resolve rates of 61.7% on SWE-bench Verified, 57.1% on SWE-bench Multilingual, and 36.8% on SWE-bench Pro. These results establish Open-SWE-Traces as a premier resource for distilling human-level software engineering capabilities into efficient, open-source agentic LLMs.
No abstract for this item (typically a correction, editorial or news piece — the publisher provides none)
The increasing demand for sustainable textile recycling requires robust automation solutions capable of handling deformable garments and detecting foreign objects in cluttered environments. This work presents a digital twin driven robotic sorting system that integrates grasp prediction, multi modal perception, and semantic reasoning for real world textile classification. A dual arm robotic cell equipped with RGBD sensing, capacitive tactile feedback, and collision-aware motion planning autonomously separates garments from an unsorted basket, transfers them to an inspection zone, and classifies them using state of the art Visual Language Models (VLMs). We benchmark nine VLM s from five model families on a dataset of 223 inspection scenarios comprising shirts, socks, trousers, underwear, foreign objects (including garments outside of the aforementioned classes), and empty scenes. The evaluation assesses per class accuracy, hallucination behavior, and computational performance under practical hardware constraints. Results show that the Qwen model family achieves the highest overall accuracy (up to 87.9 %), with strong foreign object detection performance, while lighter models such as Gemma3 offer competitive speed accuracy trade offs for edge deployment. A digital twin combined with MoveIt enables collision aware path planning and integrates segmented 3D point clouds of inspected garments into the virtual environment for improved manipulation reliability. The presented system demonstrates the feasibility of combining semantic VLM reasoning with conventional grasp detection and digital twin technology for scalable, autonomous textile sorting in realistic industrial settings.
Tool-augmented LLM agents commonly rely on step-wise atomic tool calls, where each invocation, observation, and value transfer is exposed in the main reasoning trace. This creates an execution-granularity mismatch: locally deterministic tool workflows are unfolded into repeated model-visible decisions, consuming context and forcing the model to manage low-level dataflow in the trace. We introduce HyperTool, a unified executable MCP-style tool interface that changes the model-visible unit of tool execution. A model invokes HyperTool with a code block that can call existing tools through their original schemas, manipulate returned values, and pass intermediate results locally, folding deterministic tool subroutines into a single outer call. To train models to use this interface, we synthesize HyperTool-format trajectories from cross-tool compositional tasks and verify them in real MCP environments. On MCP-Universe, HyperTool improves average accuracy from 15.69\% to 35.29\% on Qwen3-32B and from 9.93\% to 33.33\% on Qwen3-8B, and surpass GPT-OSS and Kimi-k2.5 on average accuracy, showing that our HyperTool can substantially improve multi-step tool use.
By measuring thousands of proteins in blood samples from over 60,000 people, we built molecular ‘clocks’ to estimate how fast cells age. Our analyses show that cell types age at different rates within the same person. Accelerated aging of specific cell types is associated with increased disease risk, whereas slower aging of others is linked to protection and improved survival.
arXiv:2606.13454v1 Announce Type: cross Abstract: Equilibrium Propagation offers a compelling alternative to traditional machine learning for training energy-based networks. Here we demonstrate a hybrid optical-digital implementation of EP using a Spatial Photonic Ising Machine (SPIM). The SPIM exploits the gauge transformation method to optically encode both continuous neuron states and rank-1 binary trainable patterns as phase modulations via a spatial light modulator, with inference realized using a finite difference scheme. The experimental system is evaluated on the Wine classification dataset. The potential of this approach, including the use of continuous couplings and structured coupling matrices, is evaluated numerically on the more complex MNIST dataset. Our work provides a concrete pathway toward energy-efficient physical implementations of Equilibrium Propagation.
Personalized presentation generation requires more than conditioning on a current prompt or template: agents must preserve stable user preferences across tasks, retain newly introduced preferences and constraints during multi-turn revision, and carry out local edits reliably. We propose MemSlides, a hierarchical memory framework for personalized presentation agents that separates long-term memory from working memory and further divides long-term memory into user profile memory and tool memory. User profile memory stores intent-conditioned profiles for round-0 personalization, working memory carries active preferences and session constraints across revision rounds, and tool memory stores reusable execution experience for reliable localized editing. MemSlides pairs this memory design with scoped slide-local revision, so targeted updates act on the smallest affected region instead of repeatedly regenerating the full deck. In controlled experiments, user profile memory improves persona-alignment judgments on a multi-persona, multi-intent profile bank, tool-memory injection improves closed-loop modify behavior in diagnostic matched-pair settings, and qualitative cases illustrate working memory's ability to carryover preferences. Taken together, these results suggest that effective personalization in presentation authoring depends on separating persistent user profiles, session-level working memory, and reusable execution experience across generation and localized revision.
For generative AI agents to partner effectively with human users, the ability to accurately predict human intent is critical. But this ability to collaborate remains limited by a critical deficit: an inability to model common ground. We present a referential communication experiment with a factorial design involving director-matcher pairs (human-human, human-AI, AI-human, and AI-AI) that interact with multiple turns in repeated rounds to match pictures of objects not associated with any obvious lexicalized labels. We show that LVLMs cannot interactively generate and resolve referring expressions in a way that enables smooth communication, a crucial skill that underlies human language use. We release our corpus of 356 dialogues (89 pairs over 4 rounds each) along with the online pipeline for data collection and the tools for analyzing accuracy, efficiency, and lexical overlap.
Transformers have revolutionized the field of machine learning. In particular, they can be used to solve complex algorithmic problems, including graph-based tasks. In such algorithmic tasks a key question is what is the minimal size of a transformer that can implement the task. Recent work has begun to explore this problem for graph-based tasks, showing that for sub-linear embedding dimension (i.e., model width) logarithmic depth suffices. However, an open question, which we address here, is what happens if width is allowed to grow linearly, while depth is kept fixed. Here we analyze this setting, and provide the surprising result that with linear width, constant depth suffices for solving a host of graph-based problems. This suggests that a moderate increase in width can allow much shallower models, which are advantageous in terms of inference and train time. For other problems, we show that quadratic width is required. Our results demonstrate the complex and intriguing landscape of transformer implementations of graph-based algorithms. We empirically investigate these trade-offs between the relative powers of depth and width and find tasks where wider models have the same accuracy as deep models, while having much faster train and inference time due to parallelizable hardware.
arXiv:2606.18140v1 Announce Type: cross Abstract: Electromagnetic finite element method (FEM) implementations using traditional basis functions struggle to accurately represent field behavior near singular features such as conducting wedges. To combat this, specialized singular basis functions have been introduced to directly model the singular fields in these regions, leading to substantially improved performance. While these efforts have been pursued extensively in 2D, few functions have been developed for 3D elements. In this work, we develop basis functions for this in tetrahedra. Unlike prior functions, these basis functions are additive, meaning they are included alongside the standard vector basis functions to achieve more robust performance. Further, these functions are designed to be adaptable to tetrahedra touching several unique singular features by using combinations of basis functions singular with respect to each node and edge in the element, making them applicable to highly complex geometries. Higher-order interpolatory versions of the basis functions for modeling singular behavior with greater accuracy are also provided. These basis functions lead to substantial improvements in accuracy relative to the standard basis functions, and allow otherwise expensive simulations to be performed at far lower costs. As an application example, we perform simulations to extract critical quantities for designing superconducting qubits that significantly depend on the behavior of singular fields. In Ansys HFSS, this took 21.27 hours and a peak memory usage of 6.23 TB with 800 processors available, while using our singular basis functions achieved comparable results in 196 seconds while using 27.24 GB of memory and only 16 processors. Due to these benefits, our singular basis functions could be applied to enable design optimization of electromagnetic geometries with dominantly singular behavior, such as superconducting qubits.
Streaming recurrent models enable efficient 3D reconstruction by maintaining persistent state representations. However, they suffer from catastrophic forgetting over long sequences due to balancing historical information with new observations. Recent methods alleviate this by deriving adaptive signals from the attention perspective, but they operate on single dimensions without considering temporal and spatial consistency. To this end, we propose a training-free framework termed TTSA3R that leverages both temporal state evolution and spatial observation quality for adaptive state updates in 3D reconstruction. In particular, we devise a Temporal Adaptive Update Module that regulates update magnitude by analyzing temporal state evolution patterns. Then, a Spatial Contextual Update Module is introduced to localize spatial regions that require updates through observation-state alignment and scene dynamics. These complementary signals are finally fused to determine the state updating strategies. Extensive experiments show that TTSA3R achieves competitive performance on standard short-sequence benchmarks and provides substantially stronger robustness on extended sequences. On NRGBD, as sequences extend from 50 to 250 frames, TTSA3R exhibits only a 1.33x error increase, compared with over 4x degradation for CUT3R. This highlights the practical value of temporal-spatial adaptive updates for long-term reconstruction stability. Our code is available at https://github.com/anonus2357/ttsa3r.
Deployed language models must decide not only what to answer but also when not to answer. We present UniCR, a unified framework that turns heterogeneous uncertainty evidence including sequence likelihoods, self-consistency dispersion, retrieval compatibility, and tool or verifier feedback into a calibrated probability of correctness and then enforces a user-specified error budget via principled refusal. UniCR learns a lightweight calibration head with temperature scaling and proper scoring, supports API-only models through black-box features, and offers distribution-free guarantees using conformal risk control. For long-form generation, we align confidence with semantic fidelity by supervising on atomic factuality scores derived from retrieved evidence, reducing confident hallucinations while preserving coverage. Experiments on short-form QA, code generation with execution tests, and retrieval-augmented long-form QA show consistent improvements in calibration metrics, lower area under the risk-coverage curve, and higher coverage at fixed risk compared to entropy or logit thresholds, post-hoc calibrators, and end-to-end selective baselines. Analyses reveal that evidence contradiction, semantic dispersion, and tool inconsistency are the dominant drivers of abstention, yielding informative user-facing refusal messages. The result is a portable recipe of evidence fusion to calibrated probability to risk-controlled decision that improves trustworthiness without fine-tuning the base model and remains valid under distribution shift.
arXiv:2606.20537v1 Announce Type: new Abstract: Mainstream LLM serving systems reuse prefix work mainly through paged or radix key-value (KV) caches. This is highly effective for high-throughput, high-concurrency serving, but it manages only one positional fragment of execution state: the KV cache. We study the opposite regime: low-latency, small-batch, on-device physical-AI serving, where interactive LLM agents, speech systems, and robot policies repeatedly branch, reset, interrupt, and re-enter under tight responsiveness budgets. We introduce execution-state capsules, a graph-bound checkpoint and restore mechanism for the complete restorable state at a committed boundary. FlashRT is a white-box, backend-facing kernel runtime whose evaluated NVIDIA CUDA backend runs captured graph plans over contiguous static buffers with no block-table indirection. Because the live state is a closed set of named buffers, a capsule can snapshot, restore, fork, or roll back the whole execution boundary, including KV, recurrent state, convolution state, MTP state, and metadata. This moves reuse from token-addressed KV fragments to graph-bound execution-state boundaries. On an RTX 5090, capsule restore is byte-exact at the stored-state level and token-identical under greedy decode. A KV-only ablation diverges, showing that recurrent state is load-bearing. GPU-resident snapshot and restore are sub-millisecond, and TTFT speedup over cold prefill grows from 3.9x at 2k tokens to 27x at 16k tokens. On Jetson AGX Thor and DGX Spark, the same correctness and structural properties hold. Capsules are not a replacement for high-throughput KV-cache serving; they define a complementary latency-first serving point for explicit execution-state reuse.
arXiv:2606.23932v1 Announce Type: new Abstract: Proximal Policy Optimization (PPO) is the standard policy-gradient algorithm for on-policy reinforcement learning. The literature presents it in two forms, a clipped surrogate that bounds the importance ratio between successive policies and a Kullback-Leibler penalty between them. These forms are treated as separate algorithms with their own gradients, their own hyperparameters, and their own reference implementations, and a sizeable body of empirical work compares them. We show that the gradient of the clipped surrogate is reproduced exactly by a Kullback-Leibler surrogate whose coefficient varies per sample, with closed-form dependence on the importance ratio and the advantage. The identity holds at every minibatch step and across the entire inner loop, and on five MuJoCo continuous-control benchmarks the two losses produce indistinguishable training curves. The reformulation exposes a structural feature of the clipped surrogate that the min notation hides. PPO-Clip's implicit per-sample penalty is a step function at the boundary of the trust region, and the shape of this coefficient is the natural design axis for generalising the algorithm. We sketch the resulting follow-up directions in the discussion.
We consider the problem of identifying people based on their motion styles. We present a generative model describing the action instance creation process and derive a probabilistic identity inference scheme for two common person identification scenarios motivated by the surveillance and authentication applications. We introduce a novel, interactive, scenario for person identification from motion patterns. To this end, we formalize the identification process in the context of a sequential message exchange session between the subject and the system. The subject's behavior is modeled using a probabilistic generative model inspired by the Human Information Processing (HIP) paradigm. At each stage, the system presents a visual stimulus (a cue) to the subject and records their motion response. The cue is selected so as to maximize the mutual information of the expected response and the subject's identity. Once recorded, the response is used to update the a posteriori probability over possible subjects' identities. The process terminates once a sufficient classification confidence level is reached. To the best of our knowledge, this is the first time person identification is addressed in such interactive setting. We report high recognition rates on five publicly available datasets and our own novel dataset consisting of 4,476 recordings of 22 test subjects responding to 15 cues.
arXiv:2606.15247v1 Announce Type: cross Abstract: The asymptotic behaviour of Monte Carlo Exploring Starts (MCES) is a long-standing open question in reinforcement learning, even in the tabular setting. We investigated the convergence properties of tabular MCES by constructing examples in which the algorithm converges to suboptimal solutions. This paper presents new counterexamples for both initial-visit and first-visit MCES and gives a convergence-restoring modification for the initial-visit case. We show that stable suboptimal solutions may exist for initial-visit MCES with sample-average updates even when greedy actions are updated more often than non-greedy actions on average. However, by scaling learning rates inversely to update frequencies on a state-by-state basis, convergence to optimality is guaranteed. Unlike previous uniformisation methods, this modification is applicable to large-scale problems that require approximating the estimated value function. We then extend the example to show that sample-average first-visit MCES may also converge to suboptimal solutions. This largely settles a fundamental open problem and shows that exploring starts alone do not guarantee convergence to optimality. More broadly, these results highlight that convergence depends critically on the relative size and frequency of updates applied to different actions, making the choice of learning rates and the balance between exploration and exploitation central to the analysis of MCES and the implementation of scalable Monte Carlo control methods.
Existing image editing methods can be generally categorized into textual instruction-based and visual prompt-based ones. Textual instructions are semantically expressive, but are limited by the coarse granularity of spatial control of the editing results. In contrast, visual prompts such as drag and point can provide precise spatial guidance, but are limited by the inherent ambiguity in semantic intent. To unify the strength of textual and visual prompts, we present Text-Vision Co-Instructed Image Editing, which jointly models textual instructions as semantic intent and sparse visual instructions as spatial guidance, aiming to achieve precise and intent-faithful image manipulation. To this end, we first construct a textual-visual instruction paired dataset with more than 23K samples derived from dynamic videos, enabling aligned supervision for cross-modal instruction. We then propose TV-Edit, a Textual-Visual instruction unified Editing framework to contextualize drag or point-based visual instructions with image-text semantics and lift them into semantic-aware control representations for pretrained editing backbones. By integrating semantic intent and spatial constraints, TV-Edit leads to more precise spatial control, less instruction ambiguity, and stronger structural consistency than text-only or drag-based alternatives. Finally, we establish TV-Edit-Bench, a deliberately designed benchmark to evaluate semantic faithfulness, spatial alignment, and visual consistency with ground-truth references and controlled textual-visual variations for reliable assessment. Our experiments across multiple editing backbones demonstrate that TV-Edit consistently yields more precise and intent-faithful edits, significantly outperforming state-of-the-art instruction-based and drag-based baselines.
arXiv:2606.13444v1 Announce Type: new Abstract: Graph clustering - partitioning the node set of a graph into disjoint subsets that reflect some latent information - is a fundamental problem as it finds applications in a myriad of different scenarios. While this classic problem has been tackled for decades by different communities, a recent variation of the problem driven by real data considers the scenario where nodes have attributes that are also informative. This has triggered novel methods that simultaneously leverage network information (edges) and node information (attributed) in the design of novel clustering algorithms. This work proposes a novel framework that builds on prior works that have applied graph neural networks (GNN) to graph clustering. The proposed framework operates in rounds of self learning in a fully unsupervised setting. In each round, a GNN generates representations for nodes that are used to cluster the nodes. This clustering influences the graph used to generate the node representation in the next round. Moreover, a context graph built in each round using the original graph is used to generate the node representations. Empirical results show that the proposed methodology extracts information from both network edges and node attributes in synthetic data, outperforming algorithms focused solely on the network or attributes when neither are very informative. Multiple rounds of learning also improve the performance and always outperforms a long single round of training (i.e., classic GNN graph clustering). When considering real datasets, empirical results indicate that the proposed methodology is competitive to state-of-the-art methods when cluster sizes are balanced.
arXiv:2606.24978v1 Announce Type: new Abstract: Accurate particulate matter (PM) prediction is crucial for mitigating air pollution. Graph Neural Networks (GNNs) effectively model spatiotemporal dependencies, but predefined graphs limit adaptability, and some datasets complicate learning. This study introduces a graph construction method based on a confusion matrix from a supervised learning process to dynamically capture inter-class relationships. Additionally, a hybrid loss function that combines energy distance and Huber loss is applied to address the vanishing gradient problem and improve learning stability. The approach is evaluated using air pollution data from the University of Utah AirU Pollution Monitoring Network in Salt Lake City, UT, with five GNN models: Graph Convolutional Networks (GCNs), Simple Graph Convolutional Networks (SGConv), Graph Isomorphism Networks (GINs), Graph Attention Networks (GATs), and GraphSage. The experimental results of single- and multistep predictions confirm that GraphSage achieves the highest accuracy in predicting the concentrations of PM${1}$, PM${10}$, and PM$_{2.5}$ over different time horizons. Furthermore, {\color{black} GNNExplainer (Graph Neural Network Explainer) and PGExplainer (Probabilistic Graph Explainer)} are applied to interpret feature importance and graph structure, ensuring model transparency. Results show improved prediction accuracy, with GNN models outperforming traditional machine learning \textcolor{black}{and deep learning models (i.e., Prophet, Long short-term memory, Gated recurrent units} in air pollution forecasting.
The growing need to represent diverse perspectives has increased interest in pluralistic LLM generation. Although difficult to operationalize, identifying perspectives expressed in text would provide clear guidance on pluralistic alignment and more clearly articulate the pluralistic gap in LLM generation. While models have been shown to reduce the diversity of training data and generate homogeneously, this has been demonstrated primarily on multiple-choice questionnaires or using high-level characteristics of free-form text. In this paper, we introduce and implement a domain-agnostic multi-layered framework for unsupervised extraction of perspectives suitable for identifying the pluralistic gap in LLM-generated text. We evaluate our framework on book reviews, a highly opinionated dataset representing diverse perspectives, and compare various prompts and models. Our results show that while some models and prompting techniques come close to covering a broad spectrum of perspectives, rarer perspectives remain disproportionately underrepresented, resulting in distributions that diverge from human text.
Monoallelic pathogenic or likely pathogenic variants in COL4A3 and COL4A4 occur in approximately 1 in 106 individuals, yet whether these paralogous genes confer equivalent pathogenicity for the same variant classes has not been tested at population scale. Using whole-genome sequencing data from the UK Biobank (UKB; n = 500,000), with replication in the All of Us Research Program (n = 414,000), we performed per-variant association testing, gene-based collapsing analyses and phenome-wide association studies (PheWAS) across haematuria, proteinuria and chronic kidney disease. We identified 64 COL4A3 and 92 COL4A4 rare variants significantly associated with haematuria or proteinuria, generating a quantitative allelic series for clinical variant interpretation. Glycine substitutions within collagenous domains conferred similar risks in both genes. In contrast, truncating and non-collagenous domain (NC1) missense variants were strongly associated with haematuria and proteinuria in COL4A4 carriers but showed substantially attenuated or absent associations in COL4A3 carriers despite comparable carrier frequencies and predicted pathogenicity scores. These findings were independently replicated in All of Us. Genome-wide association analysis identified the COL4A3/COL4A4 locus as the dominant genetic determinant of haematuria, with the signal attributable to the aggregate effects of rare coding variants and no evidence of independent common variant or trans-acting modifier effects. These findings demonstrate substantial gene-specific differences in tolerance to truncating and NC1 variants between COL4A3 and COL4A4, challenging assumptions of equivalent pathogenicity across paralogous collagen IV genes. Gene identity and not variant class alone, should inform risk stratification, variant interpretation and genetic counselling in individuals carrying collagen IV risk genotypes.
arXiv:2606.12350v1 Announce Type: new Abstract: The rapid proliferation of large language models (LLMs) raises critical questions about human creativity and individual expression in an era of AI-assisted creation. When do humans adopt AI suggestions, and what are the implications for individual voice? This study examines these questions through a gamified writing exercise where 74 participants (214 responses) replied to prompts while AI-generated word suggestions were available as they wrote. The game simulates a dystopian future in which an AI is attempting to learn from what remains of human individuality, and disincentivizes AI-like writing. In doing so, it attempts to create conditions that reveal authentic user preferences rather than default behaviors, such as accepting a readily available AI-generated suggestion. Note that this is a deliberate inversion of the "helpful assistant" design pattern; the system is explicitly forbidding you from accepting AI suggestions. We analyze user behavior patterns across different task types, user behaviors, and response characteristics to understand the factors influencing human-AI interaction in creative tasks. The study focuses on when users choose to maintain creative autonomy versus violating the rules of the game and accepting AI assistance. It also explores how these choices relate to response patterns, task characteristics, and user behavior. This gamified approach offers both a framework for studying authentic human-AI interaction and a provocative lens for understanding the tension between efficiency and authenticity in AI-augmented creativity.