Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.CL) 2026-06-12

Layer-Resolved Optimal Transport for Hallucination Detection in NMT and Abstractive Summarization

Optimal transport (OT) has been shown to detect hallucinations in neural machine translation (NMT) by measuring the geometric distance between cross-attention distributions and a reference distribution, without any supervision. We extend this analysis to all six decoder layers of the Fairseq DE-EN model ($N=3{,}414$), showing that Wass-to-Unif and Wass-to-Data are complementary detectors specialised across hallucination types, that detection is concentrated in layers L1–L4 with L5 anti-predictive for subtler types, and that hallucinated translations lack the exploratory attention phase present in correct translations from the first decoding step. We further evaluate whether the geometric signal transfers to abstractive summarization faithfulness detection: our unsupervised OT detector on AggreFact ($N=1{,}116$) achieves $57.2\%$/$57.6\%$ balanced accuracy on CNN/XSum – above chance but substantially below supervised MiniCheck-Flan-T5-L($69.9\%$/$74.3\%$). This gap is principled: unlike NMT hallucinations, unfaithful summaries can attend correctly to source tokens while misrepresenting their content, a failure mode invisible to concentration-based OT metrics by construction. Structural experiments on T5-base confirm consistent decoder organisation across depth, with Layer~3 showing peak concentration and Layer~12 being most critical for generation quality. Together, the results establish OT on cross-attention as a reliable detector when the failure mode is source disengagement, a principled interpretability tool regardless of task, and fundamentally limited when faithfulness failures occur downstream of attention.

02.
arXiv (CS.AI) 2026-06-19

Controlled Comparison of Machine Learning Models for Fault Classification and Localization in Power System Protection

arXiv:2510.00831v2 Announce Type: replace Abstract: The increasing complexity of modern power systems, driven by the integration of inverter-based and distributed energy resources, challenges the reliability of conventional protection schemes and motivates the use of machine learning for protection tasks. However, published results are often difficult to compare because datasets, sensing assumptions, and decision horizons vary across studies. This paper presents a controlled comparison of machine learning models for fault classification (FC) and fault localization (FL) under identical sensing, timing, and validation conditions on a common electromagnetic transient dataset, using decision windows of 10-50 ms to reflect protection-relevant time scales. For FC, the best-performing nonlinear models achieve F1 scores above 0.98 already at 10 ms, while lower-capacity models degrade at shorter horizons but improve with longer windows, indicating that relevant fault-type information is already present in the earliest transient. For FL, the top-performing models reach a stable localization error of about 10 % of normalized line length across all evaluated horizons, while weaker models form a clearly separated second performance tier. Line-resolved analysis shows that localization accuracy varies across grid segments, indicating topology-dependent difficulty rather than insufficient temporal context alone. These findings provide a controlled reference for comparing machine learning models across two protection tasks with fundamentally different information requirements.

03.
arXiv (CS.AI) 2026-06-11

An Ethical eValuation Agent (EeVA): Results of a Proof-of-Concept Test on a Prototype Agentic-like Workflow to Assist Ethical Deliberations

arXiv:2606.11218v1 Announce Type: cross Abstract: Ethical deliberation is often misunderstood as a search for single right or wrong answers, creating difficulties for non-ethically trained personnel who must address ethically laden challenges. We developed EeVA, an agentic-like LLM-based workflow designed to support comparative ethical reflection rather than deliver definitive ethical answers. EeVA was programmed in n8n using three interconnected workflows: starter, worker, and emitter. It evaluated uploaded use cases against 10 ethical frameworks through evaluator and synthesis prompts. Proof-of-concept testing used three published cases from urban mobility, peer-to-peer energy trading, and social-service resource allocation. Across all cases, EeVA produced consistently structured framework-specific evaluations and integrated syntheses. Outputs differentiated between frameworks, identified convergences and divergences, recommended modifications to increase alignment, and highlighted persistent ethical tensions. Syntheses were readable for non-specialists and shifted attention away from simplistic answers toward design conditions, safeguards, and areas where full cross-framework agreement was unlikely. The findings suggest that LLMs can be organised into usable workflows that preserve ethical plurality while helping bridge the communicative gap between ethicists and non-ethically trained personnel. EeVA's value lies not in replacing ethicists or resolving moral disagreement, but in scaffolding structured ethical deliberation. EeVA offers a promising proof of concept for supporting ethical reflection where access to ethics expertise is limited. Further work is needed on reproducibility, human evaluation, user testing, and efficiency before it can be considered a mature tool.

04.
arXiv (quant-ph) 2026-06-19

Extracting the physical content of Liouvillian eigenmodes: Semiclassical quantization

arXiv:2606.20271v1 Announce Type: new Abstract: Unlike in closed quantum systems where individual energy eigenstates are understood as physical excitations, open quantum systems have distinct right and left eigenstates of the Liouvillian that decay with time and are difficult to interpret. Here we introduce a physically motivated quasiprobability measure combining the two types of eigenstates that interprets a Liouville eigenmode as a set of coherences. This coherence measure is intimately connected to the return probability and allows one to visualize the modes as quasiprobability distributions in a "doubled" phase space. Using this measure we show that, remarkably, an oscillator retains its quantized "orbits" in phase space for a large class of linear and nonlinear damping, thus providing a formulation of semiclassical quantization for open systems. The orbits have measurable dynamical signatures and are broadened in the presence of a thermal bath, similar to energy levels. For quadratic systems, our results yield an extension of the concept of invariant tori, which play a central role in Hamiltonian systems.

05.
arXiv (CS.LG) 2026-06-18

Adaptive Speech-to-Spike Encoding for Spiking Neural Networks

arXiv:2606.19039v1 Announce Type: cross Abstract: The mismatch between continuous acoustic signals and discrete event-driven processing remains a fundamental bottleneck for neuromorphic speech processing. Current systems typically rely on fixed spike encoders, forcing downstream Spiking Neural Networks (SNNs) to compensate for non-adaptive input representations. To address this, we present a learnable residual speech-to-spike encoder jointly trained end-to-end with a Recurrent Leaky Integrate-and-Fire (R-LIF) backbone. We validate this approach on the Google Speech Commands v2 (GSC-v2) benchmark, achieving up to 94.97% accuracy. Notably, the learned encoder remains highly parameter-efficient with a compact 35k-parameter variant that reaches 89.8%, matching or exceeding prior baselines that require an order of magnitude more parameters. Our encoder-focused analysis, including linear probing and gradient-residual inspection, indicates that the encoder does not target faithful signal reconstruction but instead learns task-aligned spike representations that enhance class separability. Finally, we benchmark bio-inspired, hardware-friendly credit assignment by comparing Direct Feedback Alignment (DFA) with surrogate-gradient BPTT under identical architectures and training conditions. We find that DFA reaches 91.5% accuracy, quantifying the performance trade-off of bio-inspired learning rules for modern neuromorphic audio.

06.
arXiv (CS.AI) 2026-06-18

ProfiLLM: Utility-Aligned Agentic User Profiling for Industrial Ride-Hailing Dispatch

arXiv:2606.18803v1 Announce Type: new Abstract: Bringing Large Language Models (LLMs) into industrial ride-hailing dispatch as semantic feature extractors over platform-scale behavioral logs is a compelling but under-explored data systems problem. Production matching pipelines remain dominated by structured numerical features, yet decisive behavioral signals (e.g., a driver's habitual aversion to certain regions) are inherently contextual and naturally expressible as LLM-generated user profiles. However, scaling such profiling to a live, millisecond-latency dispatcher faces three intertwined constraints rarely addressed together: on a platform with millions of daily orders, logs exceed any LLM's context window by orders of magnitude; most users are long-tail, with too few interactions for per-user profiling; and surface-fluent profiles do not necessarily improve downstream prediction utility. We present ProfiLLM, an agentic LLM data pipeline that operationalizes utility-aligned user profiling for production matching systems through two modules. (1) Tool-Augmented Global Knowledge Mining equips an LLM agent with 27 analytical tools to mine platform-scale data, producing reusable global knowledge, adaptive user clustering rules, and region-level supply-demand priors. (2) Utility-Aligned Profile Exploration generates multiple candidate profiles per cluster, evaluates them via a lightweight downstream utility proxy, iteratively refines the best candidates and constructs preference pairs for DPO fine-tuning. Deployed on DiDi's production dispatcher, ProfiLLM achieves up to +6.14% relative AUC improvement in outcome prediction, up to +4.35% GMV gain in dispatching simulation, and consistent improvements in a 14-day online A/B test including +0.47% GMV, +0.33% Completion Rate, and -0.82% Cancel-Before-Accept rate.

07.
arXiv (CS.AI) 2026-06-15

Elastic Queries Reinforcement Learning: Self-Aware Policy Execution for VLA Models

arXiv:2606.14375v1 Announce Type: cross Abstract: Vision-language-action (VLA) models are powerful action generators for robot manipulation, but they are typically executed with fixed inference and replanning schedules. This rigidity ignores the uneven difficulty of robot control: contact-rich or uncertain states may need more computation and fresher feedback, while easier states can often be handled with fewer inference steps and longer open-loop execution. We propose Elastic Queries Reinforcement Learning (EQRL), a framework that makes each VLA policy query elastic. A lightweight latent-schedule adaptor jointly selects the latent input, denoising budget, and action chunk length, without fine-tuning the underlying VLA model. To make scheduling difficulty-aware, EQRL trains a critic over the joint latent-schedule action and derives a state difficulty signal from critic ensemble disagreement. This signal guides compute toward difficult states, while a learned residual allows task-driven correction. We formulate variable chunk execution as query-level macro-action RL with chunk-dependent discounting and an amortized number-of-function-evaluations (NFE) budget. Across simulation and real-robot manipulation, EQRL reduces amortized inference cost while preserving or improving task success.

08.
arXiv (CS.CV) 2026-06-19

Geometry-Preserving in 3D Gaussian Splatting for LiDAR-Camera Extrinsic Calibration

Accurate LiDAR-camera calibration is essential for robust multi-modal perception. Targetless approaches avoid manual setup but remain limited by the scarcity of discriminative cross-modal features. Recent methods address this by reconstructing the scene within a differentiable model, enabling extrinsic optimization through dense photometric supervision. Among these, 3D Gaussian Splatting (3DGS) has been widely adopted as a geometric proxy that bridges LiDAR and camera within a single differentiable framework. However, since 3DGS was originally designed for novel view synthesis, existing methods tend to prioritize rendering quality, causing the proxy geometry to drift from the true LiDAR structure. We propose a framework that preserves the metric geometry of the Gaussian proxy by aggregating multi-view LiDAR observations for dense depth supervision and blocking photometric gradients from updating the Gaussian spatial parameters. We validate our method on public driving datasets, where it consistently outperforms existing targetless methods in calibration accuracy.

09.
arXiv (CS.CV) 2026-06-11

The Latent Color Subspace: Emergent Order in High-Dimensional Chaos

Text-to-image generation models have advanced rapidly, yet achieving fine-grained control over generated images remains difficult, largely due to limited understanding of how semantic information is encoded. We develop an interpretation of the color representation in the Variational Autoencoder latent space of FLUX.1 [Dev], revealing a structure reflecting Hue, Saturation, and Lightness. We verify our Latent Color Subspace (LCS) interpretation by demonstrating that it can both predict and explicitly control color, introducing a fully training-free method in FLUX based solely on closed-form latent-space manipulation. Code is available at https://github.com/ExplainableML/LCS.

10.
arXiv (CS.CV) 2026-06-18

GUMP-Net: An interpretable model-data-driven intelligent algorithm for multi-class pelvic segmentation

Pelvic segmentation is one of the most important and fundamental research problems in precise and intelligent diagnosis and treatment, as well as surgical planning and navigation for pelvic fractures. By combining an improved geodesic active contour model with deep neural networks, we propose GUMP-Net, an interpretable model-data-driven intelligent algorithm for multi-class pelvic segmentation, in which three network modules are designed to constitute the overall segmentation framework together: the object detection module for automatic level set initialization, the edge detector module for learning an anatomy-aware edge detector function and the iteration module for deep level set evolution. Leveraging the advantages of level set representation and deep learning, GUMP-Net shows more accurate, robust and consistent segmentation performance, especially in small training data situation, compared to the state-of-the-art methods. Extensive experiments on pelvic datasets demonstrate the rationality and effectiveness of the proposed algorithm. Further experiments extended to ankle dataset indicate broader applications to other anatomies. The proposed algorithm not only provides an efficient segmentation method for complex fracture reduction, but also gives an interpretable geometric perspective for understanding deep learning segmentation.

11.
arXiv (quant-ph) 2026-06-16

Microscopic exceptional points in the post-selected open Jaynes–Cummings model

arXiv:2606.14982v1 Announce Type: new Abstract: Phenomenological non-Hermitian Hamiltonians track selected signatures of complex reservoir dynamics, while post-selected no-jump effective Hamiltonians derived from microscopic open-system theory reveal the underlying system–reservoir physics. We derive such a Hamiltonian for the open Jaynes–Cummings model using a Moore–Penrose normalized $\mathrm{su}(2)$ representation that removes the vacuum-sector singularity and diagonalizes the full Hamiltonian by one operator rotation. Starting from a zero-temperature bosonic reservoir, we obtain a Gorini–Kossakowski–Sudarshan–Lindblad master equation under the Born–Markov approximation with full Bohr-frequency resolution. We use partial Bohr-frequency resolution to build a consistent post-selected no-jump Hamiltonian near exceptional points, where decay rates become comparable to Rabi frequencies and remove the scale separation behind full resolution. The normalized $\mathrm{su}(2)$ form of the resulting non-Hermitian Jaynes–Cummings Hamiltonian reveals the effects of Lamb-shifted detuning, diagonal loss imbalance, and reservoir-modified coupling. Our microscopic exceptional-point analysis recovers the experimentally reported single-excitation exceptional point for unequal independent losses and identifies regimes absent from the standard phenomenological model; for example, equal correlated losses with orthogonal channel phase produce a second-order exceptional point at the same loss-to-coupling ratio in every excitation sector.

12.
arXiv (CS.CV) 2026-06-11

Finding Sparse Subnetworks in One Training Cycle via Progressive Magnitude-Based Pruning

Neural network pruning reduces model size by removing less important parameters while aiming to preserve predictive performance. Although the Lottery Ticket Hypothesis (LTH) shows that sparse subnetworks can match dense networks when trained from suitable initializations, its iterative pruning procedure requires multiple complete training cycles. This work evaluates progressive magnitude-based pruning as a single-cycle alternative. The method gradually increases sparsity during training using a linear schedule and updates pruning masks based on active weight magnitudes. We conduct systematic experiments on CIFAR-10 and MNIST across ResNet, VGG-style, and LeNet architectures, comparing the proposed method with representative iterative and initialization-based pruning baselines, including LTH, SNIP, and GraSP. On CIFAR-10, the method achieves 95.12\% accuracy on ResNet-18 at 72.9\% sparsity, compared with 90.5\% reported for LTH. At extreme sparsity, it achieves 93.13\% accuracy on a VGG-like architecture at 97\% sparsity, compared with approximately 92.0\% for SNIP, and 93.44\% accuracy on VGG-19 at 97.97\% sparsity, compared with 92.19\% for GraSP at 98\% sparsity. A sparsity-accuracy analysis on ResNet-18 further shows that accuracy remains within 0.1 percentage points of the dense baseline across 70–85\% sparsity. These results indicate that progressive magnitude-based pruning provides an effective single-cycle approach for neural network sparsification under the evaluated settings.

13.
arXiv (CS.AI) 2026-06-16

Sustainable Materials Discovery in the Era of Artificial Intelligence

arXiv:2601.21527v3 Announce Type: replace-cross Abstract: Artificial intelligence (AI) has transformed materials discovery, enabling rapid exploration of chemical space through generative models and surrogate screening. Yet current generative AI models for materials discovery, which now drive exploration of vast chemical and structural spaces, optimize candidates exclusively for structural stability and functional properties, with no integration of environmental assessment at any stage of the design loop. Prospective and ex-ante life cycle assessment methods exist and have been applied to emerging technologies, but they operate as standalone downstream analyses, not as active constraints within generative or active-learning pipelines. The result is that environmental feedback, even when produced, arrives after design decisions have been made rather than informing them. The disconnect between atomic-scale design and lifecycle assessment (LCA) reflects fundamental challenges: (i) data scarcity across heterogeneous sources, (ii) scale gaps from atoms to industrial systems, (iii) uncertainty in synthesis pathways, and (iv) the absence of frameworks that co-optimize performance with environmental impact. In this Perspective, we propose integrating upstream ML-assisted materials discovery with downstream LCA into the ML-LCA framework, comprising five components: information extraction for building materials-environment knowledge bases, harmonized databases linking properties to sustainability metrics, multi-scale models bridging atomic properties to lifecycle impacts, ensemble prediction of manufacturing pathways with uncertainty quantification, and uncertainty-aware optimization enabling simultaneous performance-sustainability navigation. Case studies spanning polymers, glass, photoresists, and cement demonstrate both necessity and feasibility while identifying material-specific integration challenges.

14.
arXiv (CS.CV) 2026-06-17

Attention Alignment Between Humans and Vision-Language Models

Visual perception depends on top-down goals and bottom-up sensory mechanisms. Vision-language models implement both, allowing us to treat each component as a separable hypothesis about what drives where we look. We compared spatial attention maps from six vision-language models against human fixation heatmaps recorded on 200 images during two tasks (general description and social captioning). The six models spanned a 2$\times$2 factorial of CNN vs.\ ViT encoders crossed with LSTM vs.\ Transformer decoders, plus Molmo 7B-D and Qwen3.5 9B. We found that both decoder and encoder architecture shaped alignment, but decoder choice dominated. LSTM vs.\ Transformer decoders increased alignment by 40–50 percentage points (80–87\% vs.\ 40–59\% of the human noise ceiling). In contrast, CNN vs.\ ViT encoders contributed a secondary 5–20 point advantage depending on decoder family, with CNN-LSTM the most aligned model overall (85–87\%). Despite their alignment advantage, LSTM-decoder attention maps were spatially diffuse and minimally task-differentiated; ViT-Transformer, the weakest in alignment, showed the sharpest spatial concentration and strongest task differentiation. A hemispatial-neglect simulation confirmed that ablating attention impacted LSTM decoders more than Transformer decoders. In an exploratory extension using TRIBE-simulated synthetic neural responses, fixation alignment and neural relevance dissociate: CNN-Transformer attention maps better predicted synthetic brain activity despite lower fixation alignment, with attention maps best predicting early visual cortex. Together, top-down and bottom-up components trade off what they predict in behavioral and synthetic neural data.

15.
arXiv (CS.AI) 2026-06-15

Silent Failures in Federated Personalization of Foundation Models

arXiv:2606.00947v2 Announce Type: replace-cross Abstract: Foundation models are increasingly personalized on decentralized private data through federated learning and are now deployed at scale under growing regulatory requirements for post-market monitoring. We argue that this convergence creates a distinct and under-recognized class of trustworthiness failures, which we term "Silent Failures." These include amplified bias, fairness collapse, and alignment erosion that may remain difficult to detect because federated learning's privacy constraints limit visibility into model behavior. A landscape analysis of existing benchmarks reveals a structural divide. Federated benchmarks evaluate system performance but provide limited insight into model behavior, whereas centralized trustworthiness benchmarks assess behavior but require model access incompatible with federated privacy. We introduce a taxonomy of six silent failure modes arising from the interaction of foundation model personalization, dataset shift, and core federated constraints. Our analysis shows that privacy-preserving training alone is insufficient for trustworthy deployment. We conclude with a research agenda for privacy-preserving behavioral evaluation and propose that silent failures become a standard diagnostic category for trustworthy federated artificial intelligence.

16.
arXiv (CS.CV) 2026-06-16

Segmentation-based Detection for Efficient Multi-Task Spacecraft Perception

Vision-based perception is fundamental to Space Situational Awareness and autonomous on-orbit operations such as rendezvous, docking, servicing, and navigation. However, progress in this area is limited by the scarcity of annotated space imagery and by challenging visual-domain characteristics including severe illumination changes, low signal-to-noise ratio, and high contrast. We address Stream 1 of the SPARK 2026 Challenge, which requires a single model for spacecraft classification, detection, and fine-grained component segmentation across multiple target types. We propose a compact architecture that integrates a MobileNetV3 encoder with a U-Net-style decoder, combining computational efficiency with accurate dense prediction. Detection is derived analytically from the union of predicted component masks, avoiding a separate bounding-box regression head in the single-spacecraft setting. Our method achieved an overall leaderboard score of 0.9482, with task-specific scores of 1.0000 in classification, 0.9788 in detection, and 0.8917 in segmentation. The proposed approach ranked second overall in the SPARK 2026 Challenge, demonstrating that lightweight encoder-decoder architectures can deliver strong multi-task performance for practical onboard space vision systems.

17.
arXiv (CS.CV) 2026-06-11

Battery detection of XRay images using transfer learning

The need for detecting and sorting batteries is drastically increasing for many applications. This study proves the potential of transfer learning in predicting whether the image contains a battery or not, the location and identifying three types of batteries, namely: prismatic, pouch, and cylindrical Lithium-Ion Batteries (LIB). Particularly, it focuses on the transfer learning method in two applications: Training a large-scale dataset to detect electronic devices using a pre-trained YOLOv5m, then using these latter trained weights to detect and classify the batteries. The precision of battery detection achieves 94%, which outperforms the pretrained YOLOv5m weights with 5%, in 22 ms inference time.

18.
Nature (Science) 2026-06-17

Revealing competitive interfacial reactions in high-energy Li–S batteries

Authors:

Charge transfer at solid–liquid interfaces plays a critical role in various energy-storage systems1, particularly under dynamically varying reactant concentrations. Deciphering these intricate reaction pathways remains a substantial challenge, notably in lithium–sulfur (Li–S) batteries, in which achieving high energy density requires efficient conversion of highly concentrated lithium polysulfides (LiPSs)2,3. However, the mechanisms governing lithium sulfide (Li2S) deposition and dissolution under lean electrolyte conditions remain poorly understood. Here, using in situ liquid-cell electron microscopy, we directly visualize concentration-driven phase segregation at the electrode–electrolyte interface. Within these high-concentration interfacial layers (HCILs), competitive surface and solution dictate the charge-transfer dynamics and ultimately govern Li2S deposition at different phase boundaries. Density functional theory (DFT) calculations reveal that the aggregation of LiPSs alters molecular geometry, electronic properties and orbital hybridization, collectively facilitating charge transfer through highly concentrated LiPSs clusters. Guided by these insights, we design optimized electrodes that balance interfacial reaction pathways, enabling fast charging (4 C, 26.8 mA cm−2) and achieving high energy densities exceeding 400 Wh kg−1. These findings provide mechanistic understanding of interfacial reactions under practical working conditions and offer a design strategy to advance Li–S batteries. Visualization of concentration-driven phase segregation within high-concentration interfacial layers in the context of high-energy lithium–sulfur batteries using liquid-cell electrochemical transmission electron microscopy reveals competitive interfacial reactions under lean electrolyte conditions at different phase boundaries.

19.
arXiv (CS.CL) 2026-06-16

The Answer Lies Within: Self-Derived Rewards Enable Explainable Relation Extraction

Despite the remarkable reasoning capabilities of large language models, they still struggle with one-shot relation extraction without predefined relation labels. We identify two pitfalls: models are often misled by irrelevant tokens instead of relation-conveying semantics, and they often fail to align with the abstraction level human annotators expect. We introduce a novel framework that closes this gap with two components: (1) COGRE, a cognitively-inspired reasoning framework that structures RE into a series of processes mimicking human text-processing; and (2) HIT@DICT, a reinforcement learning intermediate reward strategy that encourages reasoning to align with relational labels by rewarding relation-relevant phrases in reasoning. The reward is derived on a credit dictionary automatically extracted from correct predictions. Our experiments show that our framework improves both accuracy and explanation quality by addressing these two pitfalls. For example, COGRE with Qwen2.5-14B-Instruct on One-shot NYT29 achieves 24.65% F1, surpassing prior reasoning-based designs. Optimizing this approach with RL using HIT@DICT further improves performance by +23.46% points. Finally, human evaluation shows that our best model generates relational phrases closely aligned with gold labels, increasing human explanation quality ratings by 54% (relative).

20.
arXiv (quant-ph) 2026-06-12

Non-Hermitian skin effect induced by spatial noncommutativity

arXiv:2606.12961v1 Announce Type: new Abstract: In all known schemes for the non-Hermitian skin effect, the non-Hermitian ingredient that drives the skin localization, whether asymmetric hopping or gain and loss, is invariably introduced by hand as an independent model parameter along the skin direction. Here we show that when two spatial coordinates do not commute, the skin effect can break free of this paradigm: a gain-loss potential applied along one coordinate automatically generates non-reciprocity along the other through the coordinate noncommutativity, driving all eigenstates to pile up exponentially at a boundary. We term this phenomenon the noncommutative skin effect. The inverse skin length is proportional to the noncommutativity parameter and is given by an analytic formula, exact in the thermodynamic limit and verified by exact diagonalization of lattice models; the reflection symmetry of the imaginary potential furnishes an exact criterion for the presence or absence of the effect, valid rigorously for finite-size systems. For a sinusoidal imaginary potential, the skin direction of all eigenstates flips collectively at parameter points fixed purely by geometry. Because the flip point is independent of the potential strength, the reversal constitutes a zero-crossing measurement scheme intrinsically robust against systematic errors, from which the noncommutativity parameter can be extracted directly. The qualitative transition of the eigenstates from uniform to exponentially localized renders the effect a nonperturbative probe of spatial noncommutativity, and the Peierls-phase structure of its lattice model is in principle accessible to cold-atom synthetic dimensions, photonic resonators, and topolectrical circuits.

21.
arXiv (CS.LG) 2026-06-16

The Algebra of Units: From Buckingham's Pi-grec Theorem to Latent-Variable Learning

arXiv:2606.16737v1 Announce Type: cross Abstract: Engineers often measure many quantities-speed, pressure, temperature, length-expressed in different physical units. The Buckingham Pi-grec theorem states that these variables can always be combined into a smaller set of dimensionless numbers whose values fully determine the system's behaviour. Identifying the appropriate dimensionless groups has traditionally required expert knowledge and physical insight. This paper shows that they can instead be discovered automatically from data, without prior knowledge of the governing physics. The key observation is that, after logarithmic transformation, measurements collected under different scalings of the same system lie on a low-dimensional manifold whose geometry is determined by the underlying dimensionless groups. Singular value decomposition (SVD) identifies this manifold directly from data. A subsequent search over integer-exponent combinations recovers candidate dimensionless quantities, while a repeating-variable filter retains only those constructed from the machine's characteristic scales. This procedure recovers familiar engineering groups, including the flow coefficient, head coefficient, and Mach number, while excluding equivalent but less interpretable alternatives. The method is demonstrated on a synthetic compressor dataset containing 16,000 measurements. Starting from raw dimensional variables and no physics input, it recovers the correct dimensionless groups to numerical precision and reproduces the compressor performance map with an error below 0.01%. More broadly, the work reveals a close connection between classical dimensional analysis and modern data-driven learning. Both rely on the same underlying algebraic structure, suggesting new approaches for building physical models that are simultaneously interpretable, scalable, and data-efficient.

22.
arXiv (CS.AI) 2026-06-11

TAPIOCA: Why Task- Aware Pruning Improves OOD model Capability

arXiv:2605.14738v3 Announce Type: replace-cross Abstract: Recent work has promoted task-aware layer pruning as a way to improve model performance on particular tasks, as shown by TALE. In this paper, we investigate when such improvements occur and why. We show first that, across controlled polynomial regression tasks and large language models, such pruning yields no benefit on in-distribution (ID) data but consistently improves out-of-distribution (OOD) accuracy. We further show empirically that OOD inputs induce layerwise norm and pairwise-distance profiles that deviate from the corresponding ID profiles. This leads to a geometric explanation of task-aware pruning: each task induces a task-adapted geometry, characterized empirically by the representation profiles observed on ID inputs. OOD inputs can introduce a distorted version of the task-adapted geometry. Task-aware pruning identifies layers that create or amplify this distortion; by removing them, it shifts OOD representational norms and pairwise distances toward those observed on the adapted distribution. This realigns OOD inputs with the model's task-adapted geometry and improves performance. We provide causal evidence through controlled distribution shifts and residual-scaling interventions, and demonstrate consistent behavior across model scales.

23.
arXiv (CS.AI) 2026-06-16

Mitigating scalability challenges in LUT-based neural networks via pruning optimisations

arXiv:2407.02362v3 Announce Type: replace-cross Abstract: Modern deep neural networks heavily rely on a large number of multiply-accumulate operations, which constitute the predominant computational cost. To address this, Look-Up Table (LUT)-based matrix multiplications have emerged as a promising alternative for reducing the computational cost and time of the multiply-accumulate operations in a neural network. However, the LUT-based neural network still faces the scalability challenge due to the inherent limitations of LUT-based matrix multiplication. To mitigate these scalability limitations, this paper proposes a scalable and energy-efficient LUT-based approximate matrix multiplication unit (LUT-MU) constituting the basic component of the neural networks by integrating a pruning strategy on the MADDNESS algorithm, a LUT-based matrix multiplication methodology. With increasing problem size and precision demands in matrix multiplication, our proposed LUT-MU architecture effectively constrains resource expansion. The case study shows that deploying our LUT-MU in neural network architectures, including fully connected layers (MNIST) and ResNets (CIFAR-10, ImageNet)-on XCZU7EV and XCZU19EG FPGAs, produces up to $1.6 \times$ throughput improvement and $4.2 \times$ energy efficiency gains over mainstream CUDA-based network implementations, and $1.8\times$ energy efficiency compared to leading quantised neural network implementations, with moderate impact on accuracy. Compared to original MADDNESS-based neural networks, our LUT-MU shows $1.3$ to $2.6\times$ resource savings based on various resolution configuration settings of MADDNESS.

24.
arXiv (CS.CV) 2026-06-11

RankVR: Low-Rank Structure Perception and Value Recalibration for Robust Composed Image Retrieval

Composed Image Retrieval (CIR) constitutes a pivotal paradigm requiring models to perform joint reasoning on reference images and modification texts. However, the prevalence of Noisy Triplet Correspondence (NTC) in large-scale datasets severely constrains model performance. Existing denoising methods either target binary mismatches or rely on scalar-based point-wise estimation, neglecting rich global structural correlations among sample populations and dynamic value variations during training, thereby yielding suboptimal results. This paper identifies two critical unresolved challenges: Global Structural Inconsistency of Semantic Correlations and Hard Sample Discrimination Uncertainty. To address these, we propose RankVR, a framework designed to construct a robust CIR model via global structure consistency and dynamic value perception. Specifically, we introduce the Global Structure Consistency Perception (GSCP) module, which utilizes the Effective Rank of the Correlation Matrix to decouple clean samples from structural noise. By measuring rank difference, GSCP identifies samples disrupting macroscopic semantic symmetry. Furthermore, we develop the Adaptive Semantic Value Calibration (ASVC) module to distinguish high-value hard clean samples. By integrating training potential and reliability, it dynamically quantifies the semantic value of each triplet, ensuring effective utilization of hard samples while suppressing noise characterized by logical conflicts. Extensive experiments on the FashionIQ and CIRR benchmark datasets demonstrate that RankVR significantly outperforms existing state-of-the-art methods, validating its superior robustness in noisy environments.

25.
arXiv (CS.LG) 2026-06-12

An Empirical Study on Predictive Maintenance for Component X in Heavy-Duty Scania Trucks

arXiv:2606.12486v1 Announce Type: new Abstract: Condition-based Predictive Maintenance (PdM) for truck fleets has gained momentum in recent years. This maintenance strategy aims to minimize unplanned downtimes and reduce costs by monitoring the health status of vehicles and taking proactive action based on their condition. However, the implementation of condition-based PdM systems is challenging due to the large volume of data generated by the trucks, the inherent complexity of detecting failures through sensor data and the difficulties in finding cost-effective trade-offs in the solution's implementation. In this paper, we define and validate a condition-based PdM methodology built on the assumption that the wear-and-tear state of the monitored component can be represented as a monotonically non-decreasing time series. It involves selecting only the most recent observations from the time series and transforming them into a tabular format for classification using machine learning (ML) models designed for tabular data. Our results indicate that the proposed methodology reduces costs on the Scania Component X dataset compared to current state-of-the-art (SOTA) approaches, while also simplifying the modeling process through AutoML.